Kconfig Gtk/Qt interface flavours ported to newest toolkit versions

index 844bc9d..77aa0ef 100644
@@ -1,8 +1,10 @@
 # ===========================================================================
 # Kernel configuration targets
 # These targets are used from top-level makefile
+# This specific makefile only contains special targets and targets for
+# the line-oriented program. Other interface flavours are included at the end.
 
-PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
+PHONY += oldconfig config silentoldconfig update-po-config \
 	localmodconfig localyesconfig
 
 ifdef KBUILD_KCONFIG

@@ -14,21 +16,9 @@ endif
 # We need this, in case the user has it in its environment
 unexport CONFIG_
 
-xconfig: $(obj)/qconf
-	$< $(Kconfig)
-
-gconfig: $(obj)/gconf
-	$< $(Kconfig)
-
-menuconfig: $(obj)/mconf
-	$< $(Kconfig)
-
 config: $(obj)/conf
 	$< --oldaskconfig $(Kconfig)
 
-nconfig: $(obj)/nconf
-	$< $(Kconfig)
-
 oldconfig: $(obj)/conf
 	$< --$@ $(Kconfig)
 

@@ -53,7 +43,7 @@ localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
 
 # Create new linux.pot file
 # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
-update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
+update-po-config: $(obj)/kxgettext $(obj)/gkonfig/gconf.glade.h
 	$(Q)echo "  GEN     config.pot"
 	$(Q)xgettext --default-domain=linux                         \
 	    --add-comments --keyword=_ --keyword=N_                 \

@@ -110,6 +100,7 @@ help:
 	@echo  '  nconfig         - Update current config utilising a ncurses menu based program'
 	@echo  '  menuconfig	  - Update current config utilising a menu based program'
 	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
+	@echo  '  qconfig	  - Update current config utilising a QT based front-end'
 	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
 	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
 	@echo  '  localmodconfig  - Update current config disabling modules not loaded'

@@ -125,81 +116,28 @@ help:
 	@echo  '  listnewconfig   - List new options'
 	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
 
-# lxdialog stuff
-check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
-
 # Use recursively expanded variables so we do not call gcc unless
 # we really need to do so. (Do not call gcc as part of make mrproper)
 HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
                     -DLOCALE
 
 # ===========================================================================
-# Shared Makefile for the various kconfig executables:
+# Shared Makefile for some of the kconfig executables:
 # conf:	  Used for defconfig, oldconfig and related targets
-# nconf:  Used for the nconfig target.
-#         Utilizes ncurses
-# mconf:  Used for the menuconfig target
-#         Utilizes the lxdialog package
-# qconf:  Used for the xconfig target
-#         Based on QT which needs to be installed to compile it
-# gconf:  Used for the gconfig target
-#         Based on GTK which needs to be installed to compile it
 # object files used by all kconfig flavours
 
-lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
-lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
-
 conf-objs	:= conf.o  zconf.tab.o
-mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
-nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
 kxgettext-objs	:= kxgettext.o zconf.tab.o
-qconf-cxxobjs	:= qconf.o
-qconf-objs	:= zconf.tab.o
-gconf-objs	:= gconf.o zconf.tab.o
 
 hostprogs-y := conf
 
-ifeq ($(MAKECMDGOALS),nconfig)
-	hostprogs-y += nconf
-endif
-
-ifeq ($(MAKECMDGOALS),menuconfig)
-	hostprogs-y += mconf
-endif
-
 ifeq ($(MAKECMDGOALS),update-po-config)
 	hostprogs-y += kxgettext
 endif
 
-ifeq ($(MAKECMDGOALS),xconfig)
-	qconf-target := 1
-endif
-ifeq ($(MAKECMDGOALS),gconfig)
-	gconf-target := 1
-endif
-
-
-ifeq ($(qconf-target),1)
-	hostprogs-y += qconf
-endif
-
-ifeq ($(gconf-target),1)
-	hostprogs-y += gconf
-endif
-
-clean-files	:= qconf.moc .tmp_qtcheck .tmp_gtkcheck
-clean-files	+= zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
-clean-files     += mconf qconf gconf nconf
+clean-files	:= zconf.tab.c zconf.lex.c zconf.hash.c
 clean-files     += config.pot linux.pot
 
-# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
-PHONY += $(obj)/dochecklxdialog
-$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
-$(obj)/dochecklxdialog:
-	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
-
-always := dochecklxdialog
-
 # Add environment specific flags
 HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
 

@@ -210,113 +148,16 @@ HOSTCFLAGS_zconf.tab.o	:= -I$(src)
 LEX_PREFIX_zconf	:= zconf
 YACC_PREFIX_zconf	:= zconf
 
-HOSTLOADLIBES_qconf	= $(KC_QT_LIBS)
-HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS)
-
-HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
-HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-                          -Wno-missing-prototypes
-
-HOSTLOADLIBES_mconf   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
-
-HOSTLOADLIBES_nconf	= $(shell \
-				pkg-config --libs menu panel ncurses 2>/dev/null \
-				|| echo "-lmenu -lpanel -lncurses"  )
-$(obj)/qconf.o: $(obj)/.tmp_qtcheck
-
-ifeq ($(qconf-target),1)
-$(obj)/.tmp_qtcheck: $(src)/Makefile
--include $(obj)/.tmp_qtcheck
-
-# QT needs some extra effort...
-$(obj)/.tmp_qtcheck:
-	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
-	if ! pkg-config --exists QtCore 2> /dev/null; then \
-	    echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
-	    pkg-config --exists qt 2> /dev/null && pkg=qt; \
-	    pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
-	    if [ -n "$$pkg" ]; then \
-	      cflags="\$$(shell pkg-config $$pkg --cflags)"; \
-	      libs="\$$(shell pkg-config $$pkg --libs)"; \
-	      moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
-	      dir="$$(pkg-config $$pkg --variable=prefix)"; \
-	    else \
-	      for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
-	        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
-	      done; \
-	      if [ -z "$$dir" ]; then \
-	        echo >&2 "*"; \
-	        echo >&2 "* Unable to find any QT installation. Please make sure that"; \
-	        echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \
-	        echo >&2 "* either qmake can be found or install pkg-config or set"; \
-	        echo >&2 "* the QTDIR environment variable to the correct location."; \
-	        echo >&2 "*"; \
-	        false; \
-	      fi; \
-	      libpath=$$dir/lib; lib=qt; osdir=""; \
-	      $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
-	        osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
-	      test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
-	      test -f $$libpath/libqt-mt.so && lib=qt-mt; \
-	      cflags="-I$$dir/include"; \
-	      libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
-	      moc="$$dir/bin/moc"; \
-	    fi; \
-	    if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
-	      echo "*"; \
-	      echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
-	      echo "*"; \
-	      moc="/usr/bin/moc"; \
-	    fi; \
-	else \
-	  cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
-	  libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
-	  moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
-	  [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
-	fi; \
-	echo "KC_QT_CFLAGS=$$cflags" > $@; \
-	echo "KC_QT_LIBS=$$libs" >> $@; \
-	echo "KC_QT_MOC=$$moc" >> $@
-endif
-
-$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-
-ifeq ($(gconf-target),1)
--include $(obj)/.tmp_gtkcheck
-
-# GTK needs some extra effort, too...
-$(obj)/.tmp_gtkcheck:
-	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then		\
-		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
-			touch $@;								\
-		else									\
-			echo >&2 "*"; 							\
-			echo >&2 "* GTK+ is present but version >= 2.0.0 is required.";	\
-			echo >&2 "*";							\
-			false;								\
-		fi									\
-	else										\
-		echo >&2 "*"; 								\
-		echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; 	\
-		echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; 	\
-		echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
-		echo >&2 "*"; 								\
-		false;									\
-	fi
-endif
-
 $(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c
 
-$(obj)/qconf.o: $(obj)/qconf.moc
-
-quiet_cmd_moc = MOC     $@
-      cmd_moc = $(KC_QT_MOC) -i $< -o $@
+# NCurses/Dialog Interface
+include $(obj)/menuconfig/Makefile
 
-$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
-	$(call cmd,moc)
+# Qt Interface
+include $(obj)/qconfig/Makefile
 
-# Extract gconf menu items for I18N support
-$(obj)/gconf.glade.h: $(obj)/gconf.glade
-	$(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \
-	$(obj)/gconf.glade
+# NCurses Interface
+include $(obj)/nconfig/Makefile
 
+# Gtk Interface
+include $(obj)/gconfig/Makefile

62 lines not on this page · raw message

similarity index 100%
rename from scripts/kconfig/gconf.glade
rename to scripts/kconfig/gconfig/gconf.glade

similarity index 100%
rename from scripts/kconfig/lxdialog/.gitignore
rename to scripts/kconfig/menuconfig/.gitignore

similarity index 100%
rename from scripts/kconfig/lxdialog/BIG.FAT.WARNING
rename to scripts/kconfig/menuconfig/BIG.FAT.WARNING

42 lines not on this page · raw message

similarity index 100%
rename from scripts/kconfig/lxdialog/check-lxdialog.sh
rename to scripts/kconfig/menuconfig/check-lxdialog.sh

new file mode 100644
index 0000000..3d1b129
@@ -0,0 +1,26 @@
+# ===========================================================================
+# Kernel configuration targets
+# These targets are used from top-level makefile
+
+PHONY += nconfig
+
+nconfig: $(obj)/nconf
+	$< $(Kconfig)
+
+# ===========================================================================
+# nconf:  Used for the nconfig target.
+#         Utilizes ncurses
+# object files used by all kconfig flavours listed above
+
+nconf-objs     := nconfig/nconf.o zconf.tab.o nconfig/nconf.gui.o
+
+ifeq ($(MAKECMDGOALS),nconfig)
+	hostprogs-y += nconf
+endif
+
+clean-files     += nconf
+
+HOSTLOADLIBES_nconf	= $(shell \
+				pkg-config --libs menu panel ncurses 2>/dev/null \
+				|| echo "-lmenu -lpanel -lncurses"  )
+

104 lines not on this page · raw message

similarity index 99%
rename from scripts/kconfig/qconf.cc
rename to scripts/kconfig/qconfig/qconf.cc
index 1500c38..8988d91 100644
@@ -43,11 +43,11 @@
 
 #include <stdlib.h>
 
-#include "lkc.h"
+#include "../lkc.h"
 #include "qconf.h"
 
 #include "qconf.moc"
-#include "images.c"
+#include "../images.c"
 
 #ifdef _
 # undef _

index d2e6463..ad1af34 100644
@@ -2,11 +2,14 @@
 # Kernel configuration targets
 # These targets are used from kconfig top-level makefile
 
-PHONY +=  xconfig
+PHONY +=  xconfig qconfig
 
 xconfig: $(obj)/qconf
 	$< $(Kconfig)
 
+qconfig: $(obj)/qconf
+	$< $(Kconfig)
+
 # ===========================================================================
 # qconf:  Used for the xconfig/qconfig target
 #         Based on Qt4+ which needs to be installed to compile it