Skip to contentSkip to conversation

base-files: Remove profile and fstab

PATCH In review Andrei Gherzan 1 participant 2 messages Aug 21, 2013 Broadcom BCM2711/BCM2835 Arm architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 base-files: Remove profile and fstab

Remove these files as the default ones work just OK. Moreover, not having /run mounted as tmpfs, would break mounting root as read only. This is done in the default fstab so use that one.

---
 .../base-files/base-files/raspberrypi/fstab        |  9 ------
 .../base-files/base-files/raspberrypi/profile      | 33 ----------------------
 recipes-core/base-files/base-files_3.0.14.bbappend |  3 --
 3 files changed, 45 deletions(-)
 delete mode 100644 recipes-core/base-files/base-files/raspberrypi/fstab
 delete mode 100644 recipes-core/base-files/base-files/raspberrypi/profile
 delete mode 100644 recipes-core/base-files/base-files_3.0.14.bbappend
recipes-core/base-files/base-files/raspberrypi/fstab deleted +0 -9
deleted file mode 100644
index 55da1df..0000000
@@ -1,9 +0,0 @@
-# stock fstab for the RaspberryPi - you may want to tweak this to suit.
-
-rootfs               /                    auto       defaults,noatime      1  1
-proc                 /proc                proc       defaults              0  0
-devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
-usbfs                /proc/bus/usb        usbfs      defaults              0  0
-tmpfs                /var/volatile        tmpfs      defaults              0  0
-tmpfs                /dev/shm             tmpfs      mode=0777             0  0
-tmpfs                /media/ram           tmpfs      defaults              0  0
recipes-core/base-files/base-files/raspberrypi/profile deleted +0 -33
deleted file mode 100644
index 55568ad..0000000
@@ -1,33 +0,0 @@
-# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
-# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
-
-PATH="/usr/local/bin:/usr/bin:/bin"
-EDITOR="/bin/vi"			# needed for packages like cron
-test -z "$TERM" && TERM="vt100"	# Basic terminal capab. For screen etc.
-
-if [ ! -e /etc/localtime -a ! -e /etc/TZ ]; then
-	TZ="UTC"		# Time Zone. Look at http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html 
-				# for an explanation of how to set this to your local timezone.
-	export TZ
-fi
-
-if [ "`id -u`" -eq 0 ]; then
-   PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:
-fi
-if [ "$PS1" ]; then
-# works for bash and ash (no other shells known to be in use here)
-   PS1='\u@\h:\w\$ '
-fi
-
-if [ -d /etc/profile.d ]; then
-  for i in /etc/profile.d/*.sh; do
-    if [ -r $i ]; then
-      . $i
-    fi
-  done
-  unset i
-fi
-
-export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM
-
-umask 022
recipes-core/base-files/base-files_3.0.14.bbappend deleted +0 -3
deleted file mode 100644
index 36432f5..0000000
@@ -1,3 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-# Don't forget to bump PRINC if you update the extra files.
-PRINC = "1"
Signature · 1 line
1.8.1.4
#1 lore raw

Merged.

Quoted 95 lines · Andrei Gherzan

Remove these files as the default ones work just OK. Moreover, not having /run mounted as tmpfs, would break mounting root as read only. This is done in the default fstab so use that one.

---
 .../base-files/base-files/raspberrypi/fstab        |  9 ------
 .../base-files/base-files/raspberrypi/profile      | 33
----------------------
 recipes-core/base-files/base-files_3.0.14.bbappend |  3 --
 3 files changed, 45 deletions(-)
 delete mode 100644 recipes-core/base-files/base-files/raspberrypi/fstab
 delete mode 100644 recipes-core/base-files/base-files/raspberrypi/profile
 delete mode 100644 recipes-core/base-files/base-files_3.0.14.bbappend
recipes-core/base-files/base-files/raspberrypi/fstab deleted +0 -9
deleted file mode 100644
index 55da1df..0000000
@@ -1,9 +0,0 @@
-# stock fstab for the RaspberryPi - you may want to tweak this to suit.
-
-rootfs               /                    auto       defaults,noatime
 1  1
-proc                 /proc                proc       defaults
 0  0
-devpts               /dev/pts             devpts     mode=0620,gid=5
  0  0
-usbfs                /proc/bus/usb        usbfs      defaults
 0  0
-tmpfs                /var/volatile        tmpfs      defaults
 0  0
-tmpfs                /dev/shm             tmpfs      mode=0777
  0  0
-tmpfs                /media/ram           tmpfs      defaults
 0  0
recipes-core/base-files/base-files/raspberrypi/profile deleted +0 -6
deleted file mode 100644
index 55568ad..0000000
@@ -1,33 +0,0 @@
-# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
-# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
-
-PATH="/usr/local/bin:/usr/bin:/bin"
-EDITOR="/bin/vi"                       # needed for packages like cron
-test -z "$TERM" && TERM="vt100"        # Basic terminal capab. For screen

etc.

recipes-core/base-files/base-files/raspberrypi/profile deleted +0 -3
-
-if [ ! -e /etc/localtime -a ! -e /etc/TZ ]; then
-       TZ="UTC"                # Time Zone. Look at

http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html
- # for an explanation of how to set this to
your local timezone.

recipes-core/base-files/base-files/raspberrypi/profile deleted +0 -23
-       export TZ
-fi
-
-if [ "`id -u`" -eq 0 ]; then
-   PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:
-fi
-if [ "$PS1" ]; then
-# works for bash and ash (no other shells known to be in use here)
-   PS1='\u@\h:\w\$ '
-fi
-
-if [ -d /etc/profile.d ]; then
-  for i in /etc/profile.d/*.sh; do
-    if [ -r $i ]; then
-      . $i
-    fi
-  done
-  unset i
-fi
-
-export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM
-
-umask 022
recipes-core/base-files/base-files_3.0.14.bbappend deleted +0 -4
deleted file mode 100644
index 36432f5..0000000
@@ -1,3 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-# Don't forget to bump PRINC if you update the extra files.
-PRINC = "1"
--

1.8.1.4

Signature · 2 lines
*Andrei Gherzan*
m: +40.744.478.414 |  f: +40.31.816.28.12