Skip to contentSkip to conversation

iw: Print Interworking IE details in scan results.

PATCH Applied [email protected] 2 participants 5 messages Aug 29, 2013 – Aug 30, 2013

lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH v2 1/4 iw: Print Interworking IE details in scan results.

From: Ben Greear <[email protected]>

Output looks like:

	802.11u Interworking:
		Network Options: 0xf1
			Network Type: 1 (Private with Guest)
			Internet
			ASRA
			ESR
			UESA
		Venue Group: 2 (Business)
		Venue Type: 1
		HESSID: 00:00:00:00:00:01
Signed-off-by Ben Greear <[email protected]>

---

v2: Fix bracket whitespace as requested.
Fix typo in patch description.

:100644 100644 af21cbc... e8957d1... M scan.c

 scan.c |   66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 66 insertions(+), 0 deletions(-)
scan.c +66 -0
index af21cbc..e8957d1 100644
@@ -614,6 +614,71 @@ static void print_ht_capa(const uint8_t type, uint8_t len, const uint8_t *data)
 	print_ht_mcs(data + 3);
 }
 
+static const char* ntype_11u(uint8_t t)
+{
+	switch (t) {
+	case 0: return "Private";
+	case 1: return "Private with Guest";
+	case 2: return "Chargeable Public";
+	case 3: return "Free Public";
+	case 4: return "Personal Device";
+	case 5: return "Emergency Services Only";
+	case 14: return "Test or Experimental";
+	case 15: return "Wildcard";
+	default: return "Reserved";
+	}
+}
+
+static const char* vgroup_11u(uint8_t t)
+{
+	switch (t) {
+	case 0: return "Unspecified";
+	case 1: return "Assembly";
+	case 2: return "Business";
+	case 3: return "Educational";
+	case 4: return "Factory and Industrial";
+	case 5: return "Institutional";
+	case 6: return "Mercantile";
+	case 7: return "Residential";
+	case 8: return "Storage";
+	case 9: return "Utility and Miscellaneous";
+	case 10: return "Vehicular";
+	case 11: return "Outdoor";
+	default: return "Reserved";
+	}
+}
+
+static void print_interworking(const uint8_t type, uint8_t len, const uint8_t *data)
+{
+	/* See Section 7.3.2.92 in the 802.11u spec. */
+	printf("\n");
+	if (len >= 1) {
+		uint8_t ano = data[0];
+		printf("\t\tNetwork Options: 0x%hx\n", (unsigned short)(ano));
+		printf("\t\t\tNetwork Type: %i (%s)\n",
+		       (int)(ano & 0xf), ntype_11u(ano & 0xf));
+		if (ano & (1<<4))
+			printf("\t\t\tInternet\n");
+		if (ano & (1<<5))
+			printf("\t\t\tASRA\n");
+		if (ano & (1<<6))
+			printf("\t\t\tESR\n");
+		if (ano & (1<<7))
+			printf("\t\t\tUESA\n");
+	}
+	if ((len == 3) || (len == 9)) {
+		printf("\t\tVenue Group: %i (%s)\n",
+		       (int)(data[1]), vgroup_11u(data[1]));
+		printf("\t\tVenue Type: %i\n", (int)(data[2]));
+	}
+	if (len == 9)
+		printf("\t\tHESSID: %02hx:%02hx:%02hx:%02hx:%02hx:%02hx\n",
+		       data[3], data[4], data[5], data[6], data[7], data[8]);
+	else if (len == 7)
+		printf("\t\tHESSID: %02hx:%02hx:%02hx:%02hx:%02hx:%02hx\n",
+		       data[1], data[2], data[3], data[4], data[5], data[6]);
+}
+
 static const char *ht_secondary_offset[4] = {
 	"no secondary",
 	"above",

@@ -891,6 +956,7 @@ static const struct ie_print ieprinters[] = {
 	[113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
 	[114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
 	[127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
+	[107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
 };
 
 static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data)
Signature · 1 line
1.7.3.4
author
#1 lore raw

PATCH v2 2/4 iw: Print 802.11u Advertisement IE info in scan results.

From: Ben Greear <[email protected]>

Sample output looks like:

	802.11u Advertisement:
		Query Response Info: 0x7f
			Query Response Length Limit: 127
			ANQP
Signed-off-by Ben Greear <[email protected]>

---
:100644 100644 e8957d1... 53cef39... M scan.c

 scan.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)
scan.c +33 -0
index e8957d1..53cef39 100644
@@ -679,6 +679,38 @@ static void print_interworking(const uint8_t type, uint8_t len, const uint8_t *d
 		       data[1], data[2], data[3], data[4], data[5], data[6]);
 }
 
+static void print_11u_advert(const uint8_t type, uint8_t len, const uint8_t *data)
+{
+	/* See Section 7.3.2.93 in the 802.11u spec. */
+	/* TODO: This code below does not decode private protocol IDs */
+	int idx = 0;
+	printf("\n");
+	while (idx < (len - 1)) {
+		uint8_t qri = data[idx];
+		uint8_t proto_id = data[idx + 1];
+		printf("\t\tQuery Response Info: 0x%hx\n", (unsigned short)(qri));
+		printf("\t\t\tQuery Response Length Limit: %i\n",
+		       (qri & 0x7f));
+		if (qri & (1<<7))
+			printf("\t\t\tPAME-BI\n");
+		switch(proto_id) {
+		case 0:
+			printf("\t\t\tANQP\n"); break;
+		case 1:
+			printf("\t\t\tMIH Information Service\n"); break;
+		case 2:
+			printf("\t\t\tMIH Command and Event Services Capability Discovery\n"); break;
+		case 3:
+			printf("\t\t\tEmergency Alert System (EAS)\n"); break;
+		case 221:
+			printf("\t\t\tVendor Specific\n"); break;
+		default:
+			printf("\t\t\tReserved: %i\n", proto_id); break;
+		}
+		idx += 2;
+	}
+}
+
 static const char *ht_secondary_offset[4] = {
 	"no secondary",
 	"above",

@@ -957,6 +989,7 @@ static const struct ie_print ieprinters[] = {
 	[114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
 	[127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
 	[107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
+	[108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
 };
 
 static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data)
Signature · 1 line
1.7.3.4
author
#2 lore raw

PATCH v2 3/4 iw: Print 802.11u roaming consortium IE in scan results.

In reply to [email protected]

From: Ben Greear <[email protected]>

Example output:

	802.11u Roaming Consortium:
		ANQP OIs: 0
		OI 1: 01010101
Signed-off-by Ben Greear <[email protected]>

---
:100644 100644 53cef39... 14a4272... M scan.c

 scan.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 53 insertions(+), 0 deletions(-)
scan.c +53 -0
index 53cef39..14a4272 100644
@@ -711,6 +711,58 @@ static void print_11u_advert(const uint8_t type, uint8_t len, const uint8_t *dat
 	}
 }
 
+static void print_11u_rcon(const uint8_t type, uint8_t len, const uint8_t *data)
+{
+	/* See Section 7.3.2.96 in the 802.11u spec. */
+	int idx = 0;
+	int ln0 = data[1] & 0xf;
+	int ln1 = ((data[1] & 0xf0) >> 4);
+	int ln2 = 0;
+	printf("\n");
+
+	if (ln1) {
+		ln2 = len - 2 - ln0 - ln1;
+	}
+	printf("\t\tANQP OIs: %i\n", data[0]);
+
+	if (ln0 > 0) {
+		printf("\t\tOI 1: ");
+		if (2 + ln0 > len) {
+			printf("Invalid IE length.\n");
+		}
+		else {
+			for (idx = 0; idx < ln0; idx++) {
+				printf("%02hx", data[2 + idx]);
+			}
+			printf("\n");
+		}
+	}
+	if (ln1 > 0) {
+		printf("\t\tOI 2: ");
+		if (2 + ln0 + ln1 > len) {
+			printf("Invalid IE length.\n");
+		}
+		else {
+			for (idx = 0; idx < ln1; idx++) {
+				printf("%02hx", data[2 + ln0 + idx]);
+			}
+			printf("\n");
+		}
+	}
+	if (ln2 > 0) {
+		printf("\t\tOI 3: ");
+		if (2 + ln0 + ln1 + ln2 > len) {
+			printf("Invalid IE length.\n");
+		}
+		else {
+			for (idx = 0; idx < ln2; idx++) {
+				printf("%02hx", data[2 + ln0 + ln1 + idx]);
+			}
+			printf("\n");
+		}
+	}
+}
+
 static const char *ht_secondary_offset[4] = {
 	"no secondary",
 	"above",

@@ -990,6 +1042,7 @@ static const struct ie_print ieprinters[] = {
 	[127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
 	[107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
 	[108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
+	[111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), },
 };
 
 static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data)
Signature · 1 line
1.7.3.4
author
#3 lore raw

PATCH v2 4/4 iw: Print out HotSpot2 IE information.

In reply to [email protected]

From: Ben Greear <[email protected]>

Example:

	HotSpot 2.0 Indication:
		DGAF: 0
Signed-off-by Ben Greear <[email protected]>

---
:100644 100644 14a4272... 2686ff3... M scan.c

 scan.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)
scan.c +13 -0
index 14a4272..2686ff3 100644
@@ -1390,8 +1390,21 @@ static inline void print_p2p(const uint8_t type, uint8_t len, const uint8_t *dat
 	}
 }
 
+static inline void print_hs20_ind(const uint8_t type, uint8_t len, const uint8_t *data)
+{
+	/* I can't find the spec for this...just going off what wireshark uses. */
+	printf("\n");
+	if (len > 0) {
+		printf("\t\tDGAF: %i\n", (int)(data[0] & 0x1));
+	}
+	else {
+		printf("\t\tUnexpected length: %i\n", len);
+	}
+}
+
 static const struct ie_print wfa_printers[] = {
 	[9] = { "P2P", print_p2p, 2, 255, BIT(PRINT_SCAN), },
+	[16] = { "HotSpot 2.0 Indication", print_hs20_ind, 1, 255, BIT(PRINT_SCAN), },
 };
 
 static void print_vendor(unsigned char len, unsigned char *data,
Signature · 1 line
1.7.3.4