Skip to contentSkip to conversation

tcp: better comments for RTO initiallization

PATCH Applied Yuchung Cheng 4 participants 4 messages Sep 3, 2013 – Sep 4, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tcp: better comments for RTO initiallization

Commit 1b7fdd2ab585("tcp: do not use cached RTT for RTT estimation") removes important comments on how RTO is initialized and updated. Hopefully this patch puts those information back.

---
 net/ipv4/tcp_metrics.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)
net/ipv4/tcp_metrics.c +20 -6
index 273ed73..4a22f3e 100644
@@ -481,13 +481,27 @@ void tcp_init_metrics(struct sock *sk)
 	crtt = tcp_metric_get_jiffies(tm, TCP_METRIC_RTT);
 	rcu_read_unlock();
 reset:
+	/* The initial RTT measurement from the SYN/SYN-ACK is not ideal
+	 * to seed the RTO for later data packets because SYN packets are
+	 * small. Use the per-dst cached values to seed the RTO but keep
+	 * the RTT estimator variables intact (e.g., srtt, mdev, rttvar).
+	 * Later the RTO will be updated immediately upon obtaining the first
+	 * data RTT sample (tcp_rtt_estimator()). Hence the cached RTT only
+	 * influences the first RTO but not later RTT estimation.
+	 *
+	 * But if RTT is not available from the SYN (due to retransmits or
+	 * syn cookies) or the cache, force a conservative 3secs timeout.
+	 *
+	 * A bit of theory. RTT is time passed after "normal" sized packet
+	 * is sent until it is ACKed. In normal circumstances sending small
+	 * packets force peer to delay ACKs and calculation is correct too.
+	 * The algorithm is adaptive and, provided we follow specs, it
+	 * NEVER underestimate RTT. BUT! If peer tries to make some clever
+	 * tricks sort of "quick acks" for time long enough to decrease RTT
+	 * to low value, and then abruptly stops to do it and starts to delay
+	 * ACKs, wait for troubles.
+	 */
 	if (crtt > tp->srtt) {
-		/* Initial RTT (tp->srtt) from SYN usually don't measure
-		 * serialization delay on low BW links well so RTO may be
-		 * under-estimated. Stay conservative and seed RTO with
-		 * the RTTs from past data exchanges, using the same seeding
-		 * formula in tcp_rtt_estimator().
-		 */
 		inet_csk(sk)->icsk_rto = crtt + max(crtt >> 2, tcp_rto_min(sk));
 	} else if (tp->srtt == 0) {
 		/* RFC6298: 5.7 We've failed to get a valid RTT sample from
Signature · 1 line
1.8.4
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 8 lines · Yuchung Cheng

Commit 1b7fdd2ab585("tcp: do not use cached RTT for RTT estimation") removes important comments on how RTO is initialized and updated. Hopefully this patch puts those information back.

---
 net/ipv4/tcp_metrics.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

Thanks, Yuchung!

neal