hw/arm: add initial support for Canon DIGIC SoC
v3 cover hw/arm: add initial support for Canon DIGIC SoC
[RFC v3 1/5] hw/arm: add very initial support for Canon DIGIC SoC [RFC v3 2/5] hw/arm/digic: prepare DIGIC-based boards support [RFC v3 3/5] hw/arm/digic: add timer support
[RFC v3 4/5] hw/arm/digic: add UART support
[RFC v3 5/5] hw/arm/digic: add NOR ROM support
Changes since v2:
1. rebase over latest master;
* pass available size to object_initialize().
2. digic-uart: qemu_log: use LOG_UNIMP instead LOG_GUEST_ERROR;
3. digic-boards: update rom image load code: introduce digic_load_rom().
Changes since v1:
0. drop the "add ARM946E-S CPU" patch;
1. convert to QOM, split DIGIC SoC code and board code
(thanks to Andreas Fa:rber, Peter Maydell and Peter Crosthwaite);
2. fix digic-uart (many thanks to Peter Crosthwaite for his comments);
3. digic-boards: digic4_add_k8p3215uqb_rom(): update rom image load code: use -bios option.
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
See http://en.wikipedia.org/wiki/DIGIC for details.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
Also this patch series adds initial support for Canon PowerShot A1100 IS compact camera (it is my only camera with connected UART interface). As the DIGIC-based cameras differences mostly are unsignificant (e.g. RAM-size, ROM type and size, GPIO usage) the other compact and DSLR cameras support can be easely added.
This DIGIC support patch series is inspired
by EOS QEMU from Magic Lantern project.
The main differences:
* EOS QEMU uses home-brew all-in-one monolith design; this patch series uses conventional qemu object-centric design;
* EOS QEMU tries provide simplest emulation for most controllers inside SoC to run Magic Lantern firmware; this patch series provide more complete support
only for core devices to run barebox bootloader.
** EOS QEMU does not support timer counting
(this patch series emulate 1 MHz counting);
** EOS QEMU support DIGIC UART only for output character to stderr; (this patch series emulate introduces full blown UART interface);
** EOS QEMU has incomplete ROM support;
(this patch series uses conventional qemu pflash).
This initial DIGIC support can't be used to run the original camera firmware, but it can successfully run experimental version of barebox bootloader (see http://www.barebox.org).
The last sources of barebox for PowerShot A1100 can be obtained here:
https://github.com/frantony/barebox/tree/next.digic.20130829
The precompiled ROM image usable with qemu can be obtained here:
https://github.com/frantony/barebox/blob/next.digic.20130829/canon-a1100-rom1.bin
This ROM image (after "dancing bit" encoding) can be run on real Canon A1100 camera.
The short build instruction for __previous__ DIGIC barebox version (it can be used with more recent sources too) can be obtained here:
http://lists.infradead.org/pipermail/barebox/2013-August/016007.html
RFC v3 1/5 hw/arm: add very initial support for Canon DIGIC SoC
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
--- default-configs/arm-softmmu.mak | 1 + hw/arm/Makefile.objs | 2 +- hw/arm/digic.c | 70 +++++++++++++++++++++++++++++++++++++++++ include/hw/arm/digic.h | 23 ++++++++++++++ 4 files changed, 95 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic.c create mode 100644 include/hw/arm/digic.h
default-configs/arm-softmmu.mak +1 -0
@@ -63,6 +63,7 @@ CONFIG_FRAMEBUFFER=y CONFIG_XILINX_SPIPS=y CONFIG_A9SCU=y +CONFIG_DIGIC=y CONFIG_MARVELL_88W8618=y CONFIG_OMAP=y CONFIG_TSC210X=y
hw/arm/Makefile.objs +1 -1
@@ -3,5 +3,5 @@ obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o -obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o +obj-y += armv7m.o digic.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o obj-y += omap1.o omap2.o strongarm.o
hw/arm/digic.c new file +70 -0
70 lines not on this page · raw message
include/hw/arm/digic.h new file +23 -0
@@ -0,0 +1,23 @@ +/* +* Misc DIGIC declarations +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +*/ + +#ifndef __DIGIC_H__ +#define __DIGIC_H__ + +#include "cpu-qom.h" + +#define TYPE_DIGIC "digic" + +#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) + +typedef struct DigicState { +Object parent_obj; + +ARMCPU cpu; +}DigicState ; + +#endif /* __DIGIC_H__ */
Signature · 1 line
1.8.4.rc3
RFC v3 2/5 hw/arm/digic: prepare DIGIC-based boards support
In reply to Antony PavlovAlso this patch adds initial support for Canon
PowerShot A1100 IS compact camera.
--- hw/arm/Makefile.objs | 2 +- hw/arm/digic_boards.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic_boards.c
hw/arm/Makefile.objs +1 -1
@@ -1,4 +1,4 @@ -obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o +obj-y += boot.o collie.o digic_boards.o exynos4_boards.o gumstix.o highbank.o obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o
hw/arm/digic_boards.c new file +63 -0
63 lines not on this page · raw message
Signature · 1 line
1.8.4.rc3
RFC v3 3/5 hw/arm/digic: add timer support
In reply to Antony Pavlov--- hw/arm/digic.c | 25 ++++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 19 ++++++++ include/hw/arm/digic.h | 7 +++ 5 files changed, 174 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.h
hw/arm/digic.c +25 -0
@@ -30,21 +30,46 @@static void digic_init (Object *obj) {DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +char name[9 ]; + +object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,9 ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err);if (err !=NULL ) {error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)
hw/timer/Makefile.objs +1 -0
@@ -25,5 +25,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
hw/timer/digic-timer.c new file +122 -0
122 lines not on this page · raw message
hw/timer/digic-timer.h new file +19 -0
@@ -0,0 +1,19 @@ +#ifndef HW_TIMER_DIGIC_TIMER_H +#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +QEMUBH *bh; +ptimer_state *ptimer; +}DigicTimerState ; + +#endif /* HW_TIMER_DIGIC_TIMER_H */
include/hw/arm/digic.h +7 -0
@@ -10,6 +10,11 @@#include "cpu-qom.h" +#include "hw/timer/digic-timer.h" + +#define DIGIC4_NB_TIMERS 3 +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + n * 0x100) +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)
@@ -18,6 +23,8 @@ typedef struct DigicState {Object parent_obj;ARMCPU cpu; + + DigicTimerState timer[DIGIC4_NB_TIMERS]; } DigicState;#endif /* __DIGIC_H__ */
Signature · 1 line
1.8.4.rc3
Re: [Qemu-devel] [RFC v3 3/5] hw/arm/digic: add timer support
Quoted 18 lines · Antony Pavlov
Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/digic.c | 25 ++++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 19 ++++++++ include/hw/arm/digic.h | 7 +++ 5 files changed, 174 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.hhw/arm/digic.c +0
-0@@ -30,21 +30,46 @@static void digic_init (Object *obj) {
hw/arm/digic.c line 41
Quoted 10 lines
hw/arm/digic.c +6
-0DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +char name[9 ]; +
Bit of a trap if theres every more than 10 timers as the name string will run off the end if %d is below with 10. Its ok to round up a little just for defensiveness.
Quoted 83 lines
hw/arm/digic.c +19
-0+object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,9 ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err);if (err !=NULL ) {error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)hw/timer/Makefile.objs +1
-0@@ -25,5 +25,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.ohw/timer/digic-timer.c new file +32
-0@@ -0,0 +1,122 @@ +/* +* QEMU model of the Canon Digic timer block. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* See "Timer/Clock Module" docs here: +* http://magiclantern.wikia.com/wiki/Register_Map +* +* The QEMU model of the OSTimer in PKUnity SoC by Guan Xuetao +* is used as a template. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#include "hw/sysbus.h"
hw/timer/digic-timer.c line 42
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+#include "hw/ptimer.h" +#include "qemu/main-loop.h" + +#include "hw/timer/digic-timer.h" + +#ifdef DEBUG_DIGIC_TIMER +#define DPRINTF (fmt, ...) printf("%s: " fmt , __func__, ## __VA_ARGS__) +#else +#define DPRINTF (fmt, ...) do {} while (0) +#endif
I think we were encouraging unconditional compilation of error printfs rather than stripping them. This means bugs in maybe change patterns involving types which affect debug printfs can be caught in developer compile testing.
Something like this would work, although Andreas played with this recently and may have more convincing ideas.
#ifndef XILINX_SPIPS_ERR_DEBUG
#define XILINX_SPIPS_ERR_DEBUG 0
#endif
#define DB_PRINT_L(level, ...) do { \
if (XILINX_SPIPS_ERR_DEBUG > (level)) { \
fprintf(stderr, ": %s: ", __func__); \
fprintf(stderr, ## __VA_ARGS__); \
} \
} while (0);Quoted 7 lines
hw/timer/digic-timer.c new file +7
-0+ +# define DIGIC_TIMER_CONTROL 0x00 +# define DIGIC_TIMER_VALUE 0x0c + +static uint64_t digic_timer_read (void *opaque,hwaddr offset, +unsigned size) +{
hw/timer/digic-timer.c line 59
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+DigicTimerState *s = opaque; +uint32_t ret =0 ; + +switch (offset) { +case DIGIC_TIMER_VALUE : + ret = (uint32_t )ptimer_get_count (s->ptimer); + ret = ret &0xffff ; +break ; +default : +DPRINTF ("Bad offset %x\n" , (int )offset);
Guest error or Unimp?
Quoted 32 lines
hw/timer/digic-timer.c new file +32
-0+ } + +DPRINTF ("offset 0x%x, value 0x%x\n" , offset, ret); +return ret; +} + +static void digic_timer_write (void *opaque,hwaddr offset, +uint64_t value,unsigned size) +{ +DigicTimerState *s = opaque; + +/* FIXME: just now we ignore timer enable bit */ +ptimer_set_limit (s->ptimer,0x0000ffff ,1 ); +ptimer_run (s->ptimer,1 ); +} + +static const MemoryRegionOps digic_timer_ops = { + .read = digic_timer_read, + .write = digic_timer_write, + .impl = { + .min_access_size =4 , + .max_access_size =4 , + }, + .endianness =DEVICE_NATIVE_ENDIAN , +}; + +static void digic_timer_tick (void *opaque) +{ +DigicTimerState *s = opaque; + +ptimer_run (s->ptimer,1 ); +}
hw/timer/digic-timer.c line 101
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+ +static void digic_timer_init (Object *obj) +{ +DigicTimerState *s =DIGIC_TIMER (obj); + + s->bh =qemu_bh_new (digic_timer_tick, s); + s->ptimer =ptimer_init (s->bh); + +/* FIXME: there is no documentation on Digic timer +* frequency setup so let's it always run on 1 MHz
"let" (no "'s"). s/on/at
hw/timer/digic-timer.c line 102
Quoted 1 line
hw/timer/digic-timer.c new file +1
-0+* */
Extra * unneeded.
hw/timer/digic-timer.c line 106
Quoted 4 lines
hw/timer/digic-timer.c new file +4
-0+ptimer_set_freq (s->ptimer,1 *1000 *1000 ); + +memory_region_init_io (&s->iomem,OBJECT (s), &digic_timer_ops, s, +TYPE_DIGIC_TIMER ,0x100 );
Line continued function patameters should line up just past the opening ( on the next line:
function(foo,
bar
Quoted 46 lines
hw/timer/digic-timer.c new file +16
-0+sysbus_init_mmio (SYS_BUS_DEVICE (obj), &s->iomem); +} + +static const TypeInfo digic_timer_info = { + .name =TYPE_DIGIC_TIMER , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (DigicTimerState), + .instance_init = digic_timer_init, +}; + +static void digic_timer_register_type (void ) +{ +type_register_static (&digic_timer_info); +} + +type_init (digic_timer_register_type)hw/timer/digic-timer.h new file +19
-0@@ -0,0 +1,19 @@ +#ifndef HW_TIMER_DIGIC_TIMER_H +#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +QEMUBH *bh; +ptimer_state *ptimer; +}DigicTimerState ; + +#endif /* HW_TIMER_DIGIC_TIMER_H */ include/hw/arm/digic.h +0
-0
include/hw/arm/digic.h line 16
Quoted 7 lines
include/hw/arm/digic.h +4
-0@@ -10,6 +10,11 @@#include "cpu-qom.h" +#include "hw/timer/digic-timer.h" + +#define DIGIC4_NB_TIMERS 3 +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + n * 0x100)
(n) in its usage to guard against order of operations confusion incase macro is ever used with an arithmetic expression.
Quoted 17 lines
include/hw/arm/digic.h +3
-1+#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)@@ -18,6 +23,8 @@ typedef struct DigicState {Object parent_obj;ARMCPU cpu; + + DigicTimerState timer[DIGIC4_NB_TIMERS]; } DigicState;#endif /* __DIGIC_H__ */ --1.8.4.rc3
Re: [Qemu-devel] [RFC v3 3/5] hw/arm/digic: add timer support
Quoted 124 lines · On Wed, 4 Sep 2013 16:18:37 +1000 Peter Crosthwaite…
Quoted 18 lines · Antony Pavlov
Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/digic.c | 25 ++++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 19 ++++++++ include/hw/arm/digic.h | 7 +++ 5 files changed, 174 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.hhw/arm/digic.c +0
-0@@ -30,21 +30,46 @@static void digic_init (Object *obj) {hw/arm/digic.c line 41
Quoted 10 lines
hw/arm/digic.c +6
-0DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +char name[9 ]; +Bit of a trap if theres every more than 10 timers as the name string will run off the end if %d is below with 10. Its ok to round up a little just for defensiveness.
Quoted 90 lines
hw/arm/digic.c +19
-0+object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,9 ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err);if (err !=NULL ) {error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)hw/timer/Makefile.objs +1
-0@@ -25,5 +25,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.ohw/timer/digic-timer.c new file +39
-0@@ -0,0 +1,122 @@ +/* +* QEMU model of the Canon Digic timer block. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* See "Timer/Clock Module" docs here: +* http://magiclantern.wikia.com/wiki/Register_Map +* +* The QEMU model of the OSTimer in PKUnity SoC by Guan Xuetao +* is used as a template. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#include "hw/sysbus.h" +#include "hw/ptimer.h" +#include "qemu/main-loop.h" + +#include "hw/timer/digic-timer.h" + +#ifdef DEBUG_DIGIC_TIMER +#define DPRINTF (fmt, ...) printf("%s: " fmt , __func__, ## __VA_ARGS__)
Quoted 8 lines
hw/timer/digic-timer.c line 42
Quoted 3 lines
hw/timer/digic-timer.c new file +3
-0+#else +#define DPRINTF (fmt, ...) do {} while (0) +#endif I think we were encouraging unconditional compilation of error printfs rather than stripping them. This means bugs in maybe change patterns involving types which affect debug printfs can be caught in developer compile testing.
Yes, barebox project have same the same tendency.
Quoted 7 lines
Something like this would work, although Andreas played with this recently and may have more convincing ideas.
#ifndef
XILINX_SPIPS_ERR_DEBUG
#defineXILINX_SPIPS_ERR_DEBUG0
#endif
Quoted 6 lines
#define DB_PRINT_L(level, ...) do { \
if (XILINX_SPIPS_ERR_DEBUG > (level)) { \
fprintf(stderr, ": %s: ", __func__); \
fprintf(stderr, ## __VA_ARGS__); \
} \
} while (0); Do we really need a preprocessor macro here?
IMHO we can use a static inline function.
Quoted 154 lines
Quoted 7 lines
hw/timer/digic-timer.c new file +7
-0+ +# define DIGIC_TIMER_CONTROL 0x00 +# define DIGIC_TIMER_VALUE 0x0c + +static uint64_t digic_timer_read (void *opaque,hwaddr offset, +unsigned size) +{hw/timer/digic-timer.c line 59
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+DigicTimerState *s = opaque; +uint32_t ret =0 ; + +switch (offset) { +case DIGIC_TIMER_VALUE : + ret = (uint32_t )ptimer_get_count (s->ptimer); + ret = ret &0xffff ; +break ; +default : +DPRINTF ("Bad offset %x\n" , (int )offset);Guest error or Unimp?
Quoted 32 lines
hw/timer/digic-timer.c new file +32
-0+ } + +DPRINTF ("offset 0x%x, value 0x%x\n" , offset, ret); +return ret; +} + +static void digic_timer_write (void *opaque,hwaddr offset, +uint64_t value,unsigned size) +{ +DigicTimerState *s = opaque; + +/* FIXME: just now we ignore timer enable bit */ +ptimer_set_limit (s->ptimer,0x0000ffff ,1 ); +ptimer_run (s->ptimer,1 ); +} + +static const MemoryRegionOps digic_timer_ops = { + .read = digic_timer_read, + .write = digic_timer_write, + .impl = { + .min_access_size =4 , + .max_access_size =4 , + }, + .endianness =DEVICE_NATIVE_ENDIAN , +}; + +static void digic_timer_tick (void *opaque) +{ +DigicTimerState *s = opaque; + +ptimer_run (s->ptimer,1 ); +}hw/timer/digic-timer.c line 101
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+ +static void digic_timer_init (Object *obj) +{ +DigicTimerState *s =DIGIC_TIMER (obj); + + s->bh =qemu_bh_new (digic_timer_tick, s); + s->ptimer =ptimer_init (s->bh); + +/* FIXME: there is no documentation on Digic timer +* frequency setup so let's it always run on 1 MHz "let" (no "'s"). s/on/at
hw/timer/digic-timer.c line 102
Quoted 1 line
hw/timer/digic-timer.c new file +1
-0+* */ Extra * unneeded.
hw/timer/digic-timer.c line 106
Quoted 4 lines
hw/timer/digic-timer.c new file +4
-0+ptimer_set_freq (s->ptimer,1 *1000 *1000 ); + +memory_region_init_io (&s->iomem,OBJECT (s), &digic_timer_ops, s, +TYPE_DIGIC_TIMER ,0x100 );Line continued function patameters should line up just past the opening ( on the next line:
function(foo,
barQuoted 46 lines
hw/timer/digic-timer.c new file +16
-0+sysbus_init_mmio (SYS_BUS_DEVICE (obj), &s->iomem); +} + +static const TypeInfo digic_timer_info = { + .name =TYPE_DIGIC_TIMER , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (DigicTimerState), + .instance_init = digic_timer_init, +}; + +static void digic_timer_register_type (void ) +{ +type_register_static (&digic_timer_info); +} + +type_init (digic_timer_register_type)hw/timer/digic-timer.h new file +19
-0@@ -0,0 +1,19 @@ +#ifndef HW_TIMER_DIGIC_TIMER_H +#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +QEMUBH *bh; +ptimer_state *ptimer; +}DigicTimerState ; + +#endif /* HW_TIMER_DIGIC_TIMER_H */ include/hw/arm/digic.h +0
-0include/hw/arm/digic.h line 16
Quoted 7 lines
include/hw/arm/digic.h +4
-0@@ -10,6 +10,11 @@#include "cpu-qom.h" +#include "hw/timer/digic-timer.h" + +#define DIGIC4_NB_TIMERS 3 +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + n * 0x100)(n) in its usage to guard against order of operations confusion incase macro is ever used with an arithmetic expression.
Quoted 17 lines
include/hw/arm/digic.h +3
-1+#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)@@ -18,6 +23,8 @@ typedef struct DigicState {Object parent_obj;ARMCPU cpu; + + DigicTimerState timer[DIGIC4_NB_TIMERS]; } DigicState;#endif /* __DIGIC_H__ */ --1.8.4.rc3
Signature · 3 lines
-- Best regards, Antony Pavlov
Re: [Qemu-devel] [RFC v3 3/5] hw/arm/digic: add timer support
In reply to Antony PavlovQuoted 22 lines · Antony Pavlov
Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/digic.c | 25 ++++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 19 ++++++++ include/hw/arm/digic.h | 7 +++ 5 files changed, 174 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.hhw/arm/digic.c +2
-0@@ -30,21 +30,46 @@static void digic_init (Object *obj) {DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;
hw/arm/digic.c line 45
Quoted 10 lines
hw/arm/digic.c +8
-0object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +char name[9 ]; + +object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,9 ,"timer[%d]" , i);
Just use g_strdup_printf() and g_free() it afterwards; that avoids having to care about array sizes at all, and this is runs-once code so performance isn't critical.
Quoted 127 lines
hw/arm/digic.c +15
-0+object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err);if (err !=NULL ) {error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)hw/timer/Makefile.objs +1
-0@@ -25,5 +25,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.ohw/timer/digic-timer.c new file +80
-0@@ -0,0 +1,122 @@ +/* +* QEMU model of the Canon Digic timer block. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* See "Timer/Clock Module" docs here: +* http://magiclantern.wikia.com/wiki/Register_Map +* +* The QEMU model of the OSTimer in PKUnity SoC by Guan Xuetao +* is used as a template. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#include "hw/sysbus.h" +#include "hw/ptimer.h" +#include "qemu/main-loop.h" + +#include "hw/timer/digic-timer.h" + +#ifdef DEBUG_DIGIC_TIMER +#define DPRINTF (fmt, ...) printf("%s: " fmt , __func__, ## __VA_ARGS__) +#else +#define DPRINTF (fmt, ...) do {} while (0) +#endif + +# define DIGIC_TIMER_CONTROL 0x00 +# define DIGIC_TIMER_VALUE 0x0c + +static uint64_t digic_timer_read (void *opaque,hwaddr offset, +unsigned size) +{ +DigicTimerState *s = opaque; +uint32_t ret =0 ; + +switch (offset) { +case DIGIC_TIMER_VALUE : + ret = (uint32_t )ptimer_get_count (s->ptimer); + ret = ret &0xffff ; +break ; +default : +DPRINTF ("Bad offset %x\n" , (int )offset); + } + +DPRINTF ("offset 0x%x, value 0x%x\n" , offset, ret); +return ret; +} + +static void digic_timer_write (void *opaque,hwaddr offset, +uint64_t value,unsigned size) +{ +DigicTimerState *s = opaque; + +/* FIXME: just now we ignore timer enable bit */ +ptimer_set_limit (s->ptimer,0x0000ffff ,1 ); +ptimer_run (s->ptimer,1 ); +} + +static const MemoryRegionOps digic_timer_ops = { + .read = digic_timer_read, + .write = digic_timer_write, + .impl = { + .min_access_size =4 ,
hw/timer/digic-timer.c line 90
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+ .max_access_size = 4, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void digic_timer_tick (void *opaque) +{ +DigicTimerState *s = opaque; + +ptimer_run (s->ptimer,1 );
This isn't doing anything interesting. Surely it should trigger an interrupt or something?
hw/timer/digic-timer.c line 102
Quoted 12 lines
hw/timer/digic-timer.c new file +12
-0+} + +static void digic_timer_init (Object *obj) +{ +DigicTimerState *s =DIGIC_TIMER (obj); + + s->bh =qemu_bh_new (digic_timer_tick, s); + s->ptimer =ptimer_init (s->bh); + +/* FIXME: there is no documentation on Digic timer +* frequency setup so let's it always run on 1 MHz +* */
this line should be "*/", not "* */".
hw/timer/digic-timer.c line 115
Quoted 13 lines
hw/timer/digic-timer.c new file +13
-0+ptimer_set_freq (s->ptimer,1 *1000 *1000 ); + +memory_region_init_io (&s->iomem,OBJECT (s), &digic_timer_ops, s, +TYPE_DIGIC_TIMER ,0x100 ); +sysbus_init_mmio (SYS_BUS_DEVICE (obj), &s->iomem); +} + +static const TypeInfo digic_timer_info = { + .name =TYPE_DIGIC_TIMER , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (DigicTimerState), + .instance_init = digic_timer_init, +};
You need a DeviceClass::reset function (which among other things should reset the ptimer you're using); this will require a class init function so you have somewhere to set it up.
You also need a VMStateDescription so migration works.
Quoted 37 lines
hw/timer/digic-timer.c new file +7
-0+ +static void digic_timer_register_type (void ) +{ +type_register_static (&digic_timer_info); +} + +type_init (digic_timer_register_type)hw/timer/digic-timer.h new file +19
-0@@ -0,0 +1,19 @@ +#ifndef HW_TIMER_DIGIC_TIMER_H +#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +QEMUBH *bh; +ptimer_state *ptimer; +}DigicTimerState ; + +#endif /* HW_TIMER_DIGIC_TIMER_H */ include/hw/arm/digic.h +0
-0
include/hw/arm/digic.h line 16
Quoted 7 lines
include/hw/arm/digic.h +4
-0@@ -10,6 +10,11 @@#include "cpu-qom.h" +#include "hw/timer/digic-timer.h" + +#define DIGIC4_NB_TIMERS 3 +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + n * 0x100)
Brackets round the (n) on right hand side of a macro definition, please.
Quoted 14 lines
include/hw/arm/digic.h +3
-1+#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)@@ -18,6 +23,8 @@ typedef struct DigicState {Object parent_obj;ARMCPU cpu; + + DigicTimerState timer[DIGIC4_NB_TIMERS]; } DigicState;#endif /* __DIGIC_H__ */ --
Quoted 1 line
1.8.4.rc3
thanks
-- PMM
RFC v3 4/5 hw/arm/digic: add UART support
In reply to Antony Pavlov--- hw/arm/digic.c | 14 ++++ hw/char/Makefile.objs | 1 + hw/char/digic-uart.c | 197 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/char/digic-uart.h | 27 +++++++ include/hw/arm/digic.h | 4 + 5 files changed, 243 insertions(+) create mode 100644 hw/char/digic-uart.c create mode 100644 hw/char/digic-uart.h
hw/arm/digic.c +14 -0
@@ -45,6 +45,11 @@ static void digic_init(Object *obj)snprintf (name,9 ,"timer[%d]" , i);object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); } + +object_initialize (&s->uart,sizeof (s->uart),TYPE_DIGIC_UART ); + dev =DEVICE (&s->uart); +qdev_set_parent_bus (dev,sysbus_get_default ()); +object_property_add_child (obj,"uart" ,OBJECT (&s->uart),NULL ); }static void digic_realize (DeviceState *dev,Error **errp)
@@ -70,6 +75,15 @@ static void digic_realize(DeviceState *dev, Error **errp) sbd =SYS_BUS_DEVICE (&s->timer[i]);sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); } + +object_property_set_bool (OBJECT (&s->uart), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->uart); +sysbus_mmio_map (sbd,0 ,DIGIC_UART_BASE ); }static void digic_class_init (ObjectClass *oc,void *data)
hw/char/Makefile.objs +1 -0
@@ -14,6 +14,7 @@ obj-$(CONFIG_COLDFIRE) += mcf_uart.o obj-$(CONFIG_OMAP) += omap_uart.o obj-$(CONFIG_SH4) += sh_serial.o obj-$(CONFIG_PSERIES) += spapr_vty.o +obj-$(CONFIG_DIGIC) += digic-uart.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
hw/char/digic-uart.c new file +197 -0
197 lines not on this page · raw message
hw/char/digic-uart.h new file +27 -0
@@ -0,0 +1,27 @@ +#ifndef HW_CHAR_DIGIC_UART_H +#define HW_CHAR_DIGIC_UART_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" + +#define TYPE_DIGIC_UART "digic-uart" +#define DIGIC_UART (obj) \ + OBJECT_CHECK(DigicUartState, (obj), TYPE_DIGIC_UART) + +enum { +R_TX =0x00 , +R_RX , +R_ST = (0x14 >>2 ), +R_MAX +}; + +typedef struct DigicUartState { +SysBusDevice parent_obj; + +MemoryRegion regs_region; +CharDriverState *chr; + +uint32_t regs[R_MAX ]; +}DigicUartState ; + +#endif /* HW_CHAR_DIGIC_UART_H */
include/hw/arm/digic.h +4 -0
@@ -11,10 +11,13 @@#include "cpu-qom.h" #include "hw/timer/digic-timer.h" +#include "hw/char/digic-uart.h" #define DIGIC4_NB_TIMERS 3#define DIGIC4_TIMER_BASE (n) (0xc0210000 + n * 0x100) +#define DIGIC_UART_BASE 0xc0800000 +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)
@@ -25,6 +28,7 @@ typedef struct DigicState {ARMCPU cpu;DigicTimerState timer[DIGIC4_NB_TIMERS ]; + DigicUartState uart; } DigicState;#endif /* __DIGIC_H__ */
Signature · 1 line
1.8.4.rc3
RFC v3 5/5 hw/arm/digic: add NOR ROM support
In reply to Antony Pavlov--- hw/arm/digic_boards.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+)
hw/arm/digic_boards.c +74 -0
@@ -1,6 +1,13 @@#include "hw/boards.h" #include "exec/address-spaces.h" #include "hw/arm/digic.h" +#include "hw/block/flash.h" +#include "hw/loader.h" +#include "sysemu/sysemu.h" + +#define DIGIC4_ROM0_BASE 0xf0000000 +#define DIGIC4_ROM1_BASE 0xf8000000 +# define DIGIC4_ROM_MAX_SIZE 0x08000000 typedef struct DigicBoardState { DigicState *digic;
@@ -9,6 +16,10 @@ typedef struct DigicBoardState {typedef struct DigicBoard {hwaddr ram_size; +void (*add_rom0)(DigicBoardState *,hwaddr ,const char *); +const char *rom0_def_filename; +void (*add_rom1)(DigicBoardState *,hwaddr ,const char *); +const char *rom1_def_filename;hwaddr start_addr; }DigicBoard ;
@@ -35,11 +46,74 @@ static void digic4_board_init(DigicBoard *board)digic4_board_setup_ram (s, board->ram_size); +if (board->add_rom0) { + board->add_rom0 (s,DIGIC4_ROM0_BASE , board->rom0_def_filename); + } + +if (board->add_rom1) { + board->add_rom1 (s,DIGIC4_ROM1_BASE , board->rom1_def_filename); + } + s->digic->cpu.env.regs[15 ] = board->start_addr; } +static void digic_load_rom (DigicBoardState *s,hwaddr addr, +hwaddr max_size,const char *def_filename) +{ + +target_long rom_size; +const char *filename; + +if (bios_name) { + filename = bios_name; + }else { + filename = def_filename; + } + +if (filename) { +char *fn =qemu_find_file (QEMU_FILE_TYPE_BIOS , filename); + +if (!fn) { +fprintf (stderr,"Couldn't find rom image '%s'.\n" , filename); +exit (1 ); + } + + rom_size =load_image_targphys (fn, addr, max_size); +if (rom_size <0 || rom_size > max_size) { +fprintf (stderr,"Couldn't load rom image '%s'\n" , filename); +exit (1 ); + } + } +} + +static void digic4_add_k8p3215uqb_rom (DigicBoardState *s,hwaddr addr, +const char *def_filename) +{ +#define FLASH_K8P3215UQB_SIZE (4 * 1024 * 1024) +#define FLASH_K8P3215UQB_SECTOR_SIZE (64 * 1024) + +/* +* Samsung K8P3215UQB: +* * AMD command set; +* * multiple sector size: some sectors are 8K the other ones are 64K. +* Alas! The pflash_cfi02_register() function creates a flash +* device with unified sector size. +*/ +pflash_cfi02_register (addr,NULL ,"pflash" ,FLASH_K8P3215UQB_SIZE , +NULL ,FLASH_K8P3215UQB_SECTOR_SIZE , +FLASH_K8P3215UQB_SIZE /FLASH_K8P3215UQB_SECTOR_SIZE , +DIGIC4_ROM_MAX_SIZE /FLASH_K8P3215UQB_SIZE , +4 , +0x00EC ,0x007E ,0x0003 ,0x0001 , +0x0555 ,0x2aa ,0 ); + +digic_load_rom (s, addr,FLASH_K8P3215UQB_SIZE , def_filename); +} +static DigicBoard digic4_board_canon_a1100 = { .ram_size =64 *1024 *1024 , + .add_rom1 = digic4_add_k8p3215uqb_rom, + .rom1_def_filename ="canon-a1100-rom1.bin" ,/* CHDK recommends this address for ROM disassembly */ .start_addr =0xffc00000 , };
Signature · 1 line
1.8.4.rc3