Skip to contentSkip to conversation

sh: Move fpu_counter into ARCH specific thread_struct

PATCH New Vineet Gupta 1 participant 3 messages Sep 9, 2013

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 sh: Move fpu_counter into ARCH specific thread_struct

Only a couple of arches (sh/x86) use fpu_counter in task_struct so it can be moved out into ARCH specific thread_struct, reducing the size of task_struct for other arches.

Compile tested sh defconfig + sh4-linux-gcc (4.6.3)

Cc Paul Mundt <[email protected]>
Cc Michel Lespinasse <[email protected]>
Cc Kuninori Morimoto <[email protected]>
Cc Al Viro <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Jesper Nilsson <[email protected]>
Cc Chris Metcalf <[email protected]>
Cc "David S. Miller" <[email protected]>
---
 arch/sh/include/asm/fpu.h          |  2 +-
 arch/sh/include/asm/processor_32.h | 10 ++++++++++
 arch/sh/include/asm/processor_64.h | 10 ++++++++++
 arch/sh/kernel/cpu/fpu.c           |  2 +-
 arch/sh/kernel/process_32.c        |  6 +++---
 5 files changed, 25 insertions(+), 5 deletions(-)
arch/sh/include/asm/fpu.h +1 -1
index 06c4281..09fc2bc 100644
@@ -46,7 +46,7 @@ static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
 		save_fpu(tsk);
 		release_fpu(regs);
 	} else
-		tsk->fpu_counter = 0;
+		tsk->thread.fpu_counter = 0;
 }
 
 static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
arch/sh/include/asm/processor_32.h +10 -0
index e699a12..18e0377 100644
@@ -111,6 +111,16 @@ struct thread_struct {
 
 	/* Extended processor state */
 	union thread_xstate *xstate;
+
+	/*
+	 * fpu_counter contains the number of consecutive context switches
+	 * that the FPU is used. If this is over a threshold, the lazy fpu
+	 * saving becomes unlazy to save the trap. This is an unsigned char
+	 * so that after 256 times the counter wraps and the behavior turns
+	 * lazy again; this to deal with bursty apps that only use FPU for
+	 * a short time
+	 */
+	unsigned char fpu_counter;
 };
 
 #define INIT_THREAD  {						\
arch/sh/include/asm/processor_64.h +10 -0
index 1cc7d31..eedd4f6 100644
@@ -126,6 +126,16 @@ struct thread_struct {
 
 	/* floating point info */
 	union thread_xstate *xstate;
+
+	/*
+	 * fpu_counter contains the number of consecutive context switches
+	 * that the FPU is used. If this is over a threshold, the lazy fpu
+	 * saving becomes unlazy to save the trap. This is an unsigned char
+	 * so that after 256 times the counter wraps and the behavior turns
+	 * lazy again; this to deal with bursty apps that only use FPU for
+	 * a short time
+	 */
+	unsigned char fpu_counter;
 };
 
 #define INIT_MMAP \
arch/sh/kernel/cpu/fpu.c +1 -1
index f8f7af5..4e33224 100644
@@ -44,7 +44,7 @@ void __fpu_state_restore(void)
 	restore_fpu(tsk);
 
 	task_thread_info(tsk)->status |= TS_USEDFPU;
-	tsk->fpu_counter++;
+	tsk->thread.fpu_counter++;
 }
 
 void fpu_state_restore(struct pt_regs *regs)
arch/sh/kernel/process_32.c +3 -3
index ebd3933..2885fc9 100644
@@ -156,7 +156,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #endif
 		ti->addr_limit = KERNEL_DS;
 		ti->status &= ~TS_USEDFPU;
-		p->fpu_counter = 0;
+		p->thread.fpu_counter = 0;
 		return 0;
 	}
 	*childregs = *current_pt_regs();
@@ -189,7 +189,7 @@ __switch_to(struct task_struct *prev, struct task_struct *next)
 	unlazy_fpu(prev, task_pt_regs(prev));
 
 	/* we're going to use this soon, after a few expensive things */
-	if (next->fpu_counter > 5)
+	if (next->thread.fpu_counter > 5)
 		prefetch(next_t->xstate);
 
 #ifdef CONFIG_MMU
@@ -207,7 +207,7 @@ __switch_to(struct task_struct *prev, struct task_struct *next)
 	 * restore of the math state immediately to avoid the trap; the
 	 * chances of needing FPU soon are obviously high now
 	 */
-	if (next->fpu_counter > 5)
+	if (next->thread.fpu_counter > 5)
 		__fpu_state_restore();
 
 	return prev;
Signature · 7 lines
1.8.1.2

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
#1 lore raw

PATCH 2/3 x86: Move fpu_counter into ARCH specific thread_struct

Only a couple of arches (sh/x86) use fpu_counter in task_struct so it can be moved out into ARCH specific thread_struct, reducing the size of task_struct for other arches.

Compile tested i386_defconfig + gcc 4.7.3

Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Suresh Siddha <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Vincent Palatin <[email protected]>
Cc Len Brown <[email protected]>
Cc Al Viro <[email protected]>
Cc Paul Gortmaker <[email protected]>
Cc Pekka Riikonen <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Dave Jones <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc "Paul E. McKenney" <[email protected]>
---
 arch/x86/include/asm/fpu-internal.h | 10 +++++-----
 arch/x86/include/asm/processor.h    |  9 +++++++++
 arch/x86/kernel/i387.c              |  2 +-
 arch/x86/kernel/process_32.c        |  4 ++--
 arch/x86/kernel/process_64.c        |  2 +-
 arch/x86/kernel/traps.c             |  2 +-
 6 files changed, 19 insertions(+), 10 deletions(-)
arch/x86/include/asm/fpu-internal.h +5 -5
index 4d0bda7..c49a613 100644
@@ -365,7 +365,7 @@ static inline void drop_fpu(struct task_struct *tsk)
 	 * Forget coprocessor state..
 	 */
 	preempt_disable();
-	tsk->fpu_counter = 0;
+	tsk->thread.fpu_counter = 0;
 	__drop_fpu(tsk);
 	clear_used_math();
 	preempt_enable();
@@ -424,7 +424,7 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 	 * or if the past 5 consecutive context-switches used math.
 	 */
 	fpu.preload = tsk_used_math(new) && (use_eager_fpu() ||
-					     new->fpu_counter > 5);
+					     new->thread.fpu_counter > 5);
 	if (__thread_has_fpu(old)) {
 		if (!__save_init_fpu(old))
 			cpu = ~0;
@@ -433,16 +433,16 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 
 		/* Don't change CR0.TS if we just switch! */
 		if (fpu.preload) {
-			new->fpu_counter++;
+			new->thread.fpu_counter++;
 			__thread_set_has_fpu(new);
 			prefetch(new->thread.fpu.state);
 		} else if (!use_eager_fpu())
 			stts();
 	} else {
-		old->fpu_counter = 0;
+		old->thread.fpu_counter = 0;
 		old->thread.fpu.last_cpu = ~0;
 		if (fpu.preload) {
-			new->fpu_counter++;
+			new->thread.fpu_counter++;
 			if (!use_eager_fpu() && fpu_lazy_restore(new, cpu))
 				fpu.preload = 0;
 			else
arch/x86/include/asm/processor.h +9 -0
index 24cf5ae..e331f3a 100644
@@ -488,6 +488,15 @@ struct thread_struct {
 	unsigned long		iopl;
 	/* Max allowed port in the bitmap, in bytes: */
 	unsigned		io_bitmap_max;
+	/*
+	 * fpu_counter contains the number of consecutive context switches
+	 * that the FPU is used. If this is over a threshold, the lazy fpu
+	 * saving becomes unlazy to save the trap. This is an unsigned char
+	 * so that after 256 times the counter wraps and the behavior turns
+	 * lazy again; this to deal with bursty apps that only use FPU for
+	 * a short time
+	 */
+	unsigned char fpu_counter;
 };
 
 /*
arch/x86/kernel/i387.c +1 -1
index 5d576ab..e8368c6 100644
@@ -100,7 +100,7 @@ void unlazy_fpu(struct task_struct *tsk)
 		__save_init_fpu(tsk);
 		__thread_fpu_end(tsk);
 	} else
-		tsk->fpu_counter = 0;
+		tsk->thread.fpu_counter = 0;
 	preempt_enable();
 }
 EXPORT_SYMBOL(unlazy_fpu);
arch/x86/kernel/process_32.c +2 -2
index f8adefc..4de6e36 100644
@@ -153,7 +153,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		childregs->orig_ax = -1;
 		childregs->cs = __KERNEL_CS | get_kernel_rpl();
 		childregs->flags = X86_EFLAGS_IF | X86_EFLAGS_FIXED;
-		p->fpu_counter = 0;
+		p->thread.fpu_counter = 0;
 		p->thread.io_bitmap_ptr = NULL;
 		memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
 		return 0;
@@ -166,7 +166,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	p->thread.ip = (unsigned long) ret_from_fork;
 	task_user_gs(p) = get_user_gs(current_pt_regs());
 
-	p->fpu_counter = 0;
+	p->thread.fpu_counter = 0;
 	p->thread.io_bitmap_ptr = NULL;
 	tsk = current;
 	err = -ENOMEM;
arch/x86/kernel/process_64.c +1 -1
index 05646ba..9b97949 100644
@@ -163,7 +163,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	p->thread.sp = (unsigned long) childregs;
 	p->thread.usersp = me->thread.usersp;
 	set_tsk_thread_flag(p, TIF_FORK);
-	p->fpu_counter = 0;
+	p->thread.fpu_counter = 0;
 	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
arch/x86/kernel/traps.c +1 -1
index 1b23a1c..f350d7e 100644
@@ -649,7 +649,7 @@ void math_state_restore(void)
 		return;
 	}
 
-	tsk->fpu_counter++;
+	tsk->thread.fpu_counter++;
 }
 EXPORT_SYMBOL_GPL(math_state_restore);
 
Signature · 7 lines
1.8.1.2

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
#2 lore raw

PATCH 3/3 sched: Remove ARCH specific fpu_counter from task_struct

In reply to Vineet Gupta

fpu_counter in task_struct was used only by sh/x86.
Both of these now carry it in ARCH specific thread_struct, hence this can now be removed from generic task_struct, shrinking it slightly for other arches.

Cc Ingo Molnar <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 include/linux/sched.h | 9 ---------
 1 file changed, 9 deletions(-)
include/linux/sched.h +0 -9
index 078066d..b560364 100644
@@ -1051,15 +1051,6 @@ struct task_struct {
 	struct hlist_head preempt_notifiers;
 #endif
 
-	/*
-	 * fpu_counter contains the number of consecutive context switches
-	 * that the FPU is used. If this is over a threshold, the lazy fpu
-	 * saving becomes unlazy to save the trap. This is an unsigned char
-	 * so that after 256 times the counter wraps and the behavior turns
-	 * lazy again; this to deal with bursty apps that only use FPU for
-	 * a short time
-	 */
-	unsigned char fpu_counter;
 #ifdef CONFIG_BLK_DEV_IO_TRACE
 	unsigned int btrace_seq;
 #endif
Signature · 7 lines
1.8.1.2

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>