bnx2x: Fix configuration of doorbell block
PATCH 1/1 bnx2x: Fix configuration of doorbell block
As part of VF RSS feature doorbell block was configured not to use dpm, but a small part of configuration was left out, preventing the driver from sending tx messages to the device. This patch adds the missing configuration.
--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 3 --- 2 files changed, 1 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +1 -0
@@ -7645,6 +7645,7 @@ static int bnx2x_init_hw_func(struct bnx2x *bp)bnx2x_init_block (bp,BLOCK_TM , init_phase);bnx2x_init_block (bp,BLOCK_DORQ , init_phase); +REG_WR (bp,DORQ_REG_MODE_ACT ,1 );/* no dpm */ bnx2x_iov_init_dq (bp);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +0 -3
@@ -1756,9 +1756,6 @@ void bnx2x_iov_init_dq(struct bnx2x *bp)REG_WR (bp,DORQ_REG_VF_TYPE_MIN_MCID_0 ,0 );REG_WR (bp,DORQ_REG_VF_TYPE_MAX_MCID_0 ,0x1ffff ); -/* set the number of VF allowed doorbells to the full DQ range */ -REG_WR (bp,DORQ_REG_VF_NORM_MAX_CID_COUNT ,0x20000 ); -/* set the VF doorbell threshold */ REG_WR (bp,DORQ_REG_VF_USAGE_CT_LIMIT ,4 ); }
Signature · 1 line
1.7.1
Quoted 11 lines · Ariel Elior
As part of VF RSS feature doorbell block was configured not to use dpm, but a small part of configuration was left out, preventing the driver from sending tx messages to the device. This patch adds the missing configuration.
Reported-by Eric Dumazet <[email protected]>Signed-off-by Ariel Elior <[email protected]>Signed-off-by Eilon Greenstein <[email protected]>--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 3 --- 2 files changed, 1 insertions(+), 3 deletions(-)
Thanks for fixing this.
From: Eric Dumazet <[email protected]>
Date: Mon, 09 Sep 2013 07:17:16 -0700
Quoted 13 lines · Ariel Elior
Quoted 11 lines
As part of VF RSS feature doorbell block was configured not to use dpm, but a small part of configuration was left out, preventing the driver from sending tx messages to the device. This patch adds the missing configuration.
Reported-by Eric Dumazet <[email protected]>Signed-off-by Ariel Elior <[email protected]>Signed-off-by Eilon Greenstein <[email protected]>--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 3 --- 2 files changed, 1 insertions(+), 3 deletions(-)
Quoted 3 lines
Thanks for fixing this.
Tested-by Eric Dumazet <[email protected]>
Applied, thanks.