Refactor kernel recipes
cover Refactor kernel recipes
From: Philipp Wagner <[email protected]>
Hi,
as follow-up to the discussion in
[yocto] [meta-raspberrypi][PATCH] linux-raspberrypi: Add version 3.8.13 I've refactored the kernel recipes a bit and included all discussed kernel versions. The default is now 3.6.
I've left linux.inc as-is, as this seems to be copied from meta-oe. Should we include this directly instead of copying it here?
Philipp
Philipp Wagner (4):
Refactor kernel recipes to reduce code duplication Remove tabs from recipe
Make Linux 3.6 the default for Raspberry Pi Add kernel 3.8 and 3.11 for Raspberry Pi
conf/machine/include/rpi-default-providers.inc | 3 + recipes-kernel/linux/linux-raspberrypi.inc | 34 +++++ recipes-kernel/linux/linux-raspberrypi_3.11.0.bb | 6 + recipes-kernel/linux/linux-raspberrypi_3.2.27.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.6.11.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.8.13.bb | 6 + recipes-kernel/linux/linux.inc | 174 +++++++++++------------ 7 files changed, 140 insertions(+), 149 deletions(-) create mode 100644 recipes-kernel/linux/linux-raspberrypi.inc create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.11.0.bb create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.8.13.bb
Signature · 1 line
1.8.1.4
PATCH 1/4 Refactor kernel recipes to reduce code duplication
From: Philipp Wagner <[email protected]>
--- recipes-kernel/linux/linux-raspberrypi.inc | 34 ++++++++++++++++++++++++ recipes-kernel/linux/linux-raspberrypi_3.2.27.bb | 33 ++--------------------- recipes-kernel/linux/linux-raspberrypi_3.6.11.bb | 33 ++--------------------- 3 files changed, 38 insertions(+), 62 deletions(-) create mode 100644 recipes-kernel/linux/linux-raspberrypi.inc
recipes-kernel/linux/linux-raspberrypi.inc new file +34 -0
@@ -0,0 +1,34 @@ +require linux.inc + +DESCRIPTION = "Linux Kernel for Raspberry Pi" +SECTION = "kernel" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" + +COMPATIBLE_MACHINE = "raspberrypi" + +PV_append = "+git${SRCREV}" + +S = "${WORKDIR}/git" + +# NOTE: For now we pull in the default config from the RPi kernel GIT tree. +KERNEL_DEFCONFIG = "bcmrpi_defconfig" + +# CMDLINE for raspberrypi +CMDLINE_raspberrypi = "dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" + +UDEV_GE_141 ?= "1" + +do_configure_prepend() { + install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." +} + +do_install_prepend() { + install -d ${D}/lib/firmware +} + +do_deploy_append() { + # Deploy cmdline.txt + install -d ${DEPLOYDIR}/bcm2835-bootfiles + echo "${CMDLINE}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt +}
recipes-kernel/linux/linux-raspberrypi_3.2.27.bb +2 -31
@@ -1,35 +1,6 @@ -require linux.inc - -DESCRIPTION = "Linux kernel for the RaspberryPi board" -COMPATIBLE_MACHINE = "raspberrypi" - -PR = "r7" -PV_append = "+git${SRCREV}" - SRCREV = "ada8b4415ff44d535d63e4291a0eca733bc2ad0f" SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27 \ - file://sl030raspberrypii2ckernel.patch \ + file://sl030raspberrypii2ckernel.patch \ " -S = "${WORKDIR}/git" - -# NOTE: For now we pull in the default config from the RPi kernel GIT tree. -KERNEL_DEFCONFIG = "bcmrpi_defconfig" - -# CMDLINE for raspberrypi -CMDLINE_raspberrypi = "dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" - -UDEV_GE_141 ?= "1" - -do_configure_prepend() { - install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." -} - -do_install_prepend() { - install -d ${D}/lib/firmware -} -do_deploy_append() { - # Deploy cmdline.txt - install -d ${DEPLOYDIR}/bcm2835-bootfiles - echo "${CMDLINE}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt -} +require linux-raspberrypi.inc
recipes-kernel/linux/linux-raspberrypi_3.6.11.bb +2 -31
@@ -1,35 +1,6 @@ -require linux.inc - -DESCRIPTION = "Linux kernel for the RaspberryPi board" -COMPATIBLE_MACHINE = "raspberrypi" - -PR = "r7" -PV_append = "+git${SRCREV}" - -SRCREV = "63b69a8806ce1890711ff55280c90673ea415933" +SRCREV = "cbd6672e7e1b2dc5026f5dc7929a13a9a68f2a62" SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.6.y \ file://sl030raspberrypii2ckernel.patch \ " -S = "${WORKDIR}/git" - -# NOTE: For now we pull in the default config from the RPi kernel GIT tree. -KERNEL_DEFCONFIG = "bcmrpi_defconfig" - -# CMDLINE for raspberrypi -CMDLINE_raspberrypi = "dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" - -UDEV_GE_141 ?= "1" - -do_configure_prepend() { - install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." -} - -do_install_prepend() { - install -d ${D}/lib/firmware -} -do_deploy_append() { - # Deploy cmdline.txt - install -d ${DEPLOYDIR}/bcm2835-bootfiles - echo "${CMDLINE}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt -} +require linux-raspberrypi.inc
Signature · 1 line
1.8.1.4
PATCH 2/4 Remove tabs from recipe
In reply to [email protected]From: Philipp Wagner <[email protected]>
--- recipes-kernel/linux/linux.inc | 174 ++++++++++++++++++++--------------------- 1 file changed, 87 insertions(+), 87 deletions(-)
recipes-kernel/linux/linux.inc +87 -87
@@ -21,96 +21,96 @@ CMDLINE_append = " ${CMDLINE_DEBUG}" # $1 - Configure variable to be set # $2 - value [n/y/value] kernel_configure_variable() { - # Remove the config - CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;" - if test "$2" = "n" - then - echo "# CONFIG_$1 is not set" >> ${S}/.config - else - echo "CONFIG_$1=$2" >> ${S}/.config - fi + # Remove the config + CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;" + if test "$2" = "n" + then + echo "# CONFIG_$1 is not set" >> ${S}/.config + else + echo "CONFIG_$1=$2" >> ${S}/.config + fi } do_configure_prepend() { - # Clean .config - echo "" > ${S}/.config - CONF_SED_SCRIPT="" - - # oabi / eabi support - if [ "${TARGET_OS}" = "linux-gnueabi" -o "${TARGET_OS}" = "linux-uclibceabi" ]; then - kernel_configure_variable AEABI y - if [ "${ARM_KEEP_OABI}" = "1" ] ; then - kernel_configure_variable OABI_COMPAT y - else - kernel_configure_variable OABI_COMPAT n - fi - else - kernel_configure_variable AEABI n - kernel_configure_variable OABI_COMPAT n - fi - - # Set cmdline - kernel_configure_variable CMDLINE "\"${CMDLINE}\"" - - # Localversion - kernel_configure_variable LOCALVERSION "\"\"" - kernel_configure_variable LOCALVERSION_AUTO n - - # Udev quirks - # Newer versions of udev mandate that sysfs doesn't have deprecated entries - if [ "${UDEV_GE_141}" = "1" ] ; then - kernel_configure_variable SYSFS_DEPRECATED n - kernel_configure_variable SYSFS_DEPRECATED_V2 n - kernel_configure_variable HOTPLUG y - kernel_configure_variable UEVENT_HELPER_PATH "\"\"" - kernel_configure_variable UNIX y - kernel_configure_variable SYSFS y - kernel_configure_variable PROC_FS y - kernel_configure_variable TMPFS y - kernel_configure_variable INOTIFY_USER y - kernel_configure_variable SIGNALFD y - kernel_configure_variable TMPFS_POSIX_ACL y - kernel_configure_variable BLK_DEV_BSG y - kernel_configure_variable DEVTMPFS y - kernel_configure_variable DEVTMPFS_MOUNT y - fi - - # Newer inits like systemd need cgroup support - if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then - kernel_configure_variable CGROUP_SCHED y - kernel_configure_variable CGROUPS y - kernel_configure_variable CGROUP_NS y - kernel_configure_variable CGROUP_FREEZER y - kernel_configure_variable CGROUP_DEVICE y - kernel_configure_variable CPUSETS y - kernel_configure_variable PROC_PID_CPUSET y - kernel_configure_variable CGROUP_CPUACCT y - kernel_configure_variable RESOURCE_COUNTERS y - fi - - # root-over-nfs-over-usb-eth support. Limited, but should cover some cases - # Enable this by setting a proper CMDLINE_NFSROOT_USB. - if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then - oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}" - kernel_configure_variable INET y - kernel_configure_variable IP_PNP y - kernel_configure_variable USB_GADGET y - kernel_configure_variable USB_GADGET_SELECTED y - kernel_configure_variable USB_ETH y - kernel_configure_variable NFS_FS y - kernel_configure_variable ROOT_NFS y - kernel_configure_variable ROOT_NFS y - kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\"" - fi - - # Activate CONFIG_LEGACY_PTYS - kernel_configure_variable LEGACY_PTYS y - - # Keep this the last line - # Remove all modified configs and add the rest to .config - sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${S}/.config' - - yes '' | oe_runmake oldconfig + # Clean .config + echo "" > ${S}/.config + CONF_SED_SCRIPT="" + + # oabi / eabi support + if [ "${TARGET_OS}" = "linux-gnueabi" -o "${TARGET_OS}" = "linux-uclibceabi" ]; then + kernel_configure_variable AEABI y + if [ "${ARM_KEEP_OABI}" = "1" ] ; then + kernel_configure_variable OABI_COMPAT y + else + kernel_configure_variable OABI_COMPAT n + fi + else + kernel_configure_variable AEABI n + kernel_configure_variable OABI_COMPAT n + fi + + # Set cmdline + kernel_configure_variable CMDLINE "\"${CMDLINE}\"" + + # Localversion + kernel_configure_variable LOCALVERSION "\"\"" + kernel_configure_variable LOCALVERSION_AUTO n + + # Udev quirks + # Newer versions of udev mandate that sysfs doesn't have deprecated entries + if [ "${UDEV_GE_141}" = "1" ] ; then + kernel_configure_variable SYSFS_DEPRECATED n + kernel_configure_variable SYSFS_DEPRECATED_V2 n + kernel_configure_variable HOTPLUG y + kernel_configure_variable UEVENT_HELPER_PATH "\"\"" + kernel_configure_variable UNIX y + kernel_configure_variable SYSFS y + kernel_configure_variable PROC_FS y + kernel_configure_variable TMPFS y + kernel_configure_variable INOTIFY_USER y + kernel_configure_variable SIGNALFD y + kernel_configure_variable TMPFS_POSIX_ACL y + kernel_configure_variable BLK_DEV_BSG y + kernel_configure_variable DEVTMPFS y + kernel_configure_variable DEVTMPFS_MOUNT y + fi + + # Newer inits like systemd need cgroup support + if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then + kernel_configure_variable CGROUP_SCHED y + kernel_configure_variable CGROUPS y + kernel_configure_variable CGROUP_NS y + kernel_configure_variable CGROUP_FREEZER y + kernel_configure_variable CGROUP_DEVICE y + kernel_configure_variable CPUSETS y + kernel_configure_variable PROC_PID_CPUSET y + kernel_configure_variable CGROUP_CPUACCT y + kernel_configure_variable RESOURCE_COUNTERS y + fi + + # root-over-nfs-over-usb-eth support. Limited, but should cover some cases + # Enable this by setting a proper CMDLINE_NFSROOT_USB. + if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then + oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}" + kernel_configure_variable INET y + kernel_configure_variable IP_PNP y + kernel_configure_variable USB_GADGET y + kernel_configure_variable USB_GADGET_SELECTED y + kernel_configure_variable USB_ETH y + kernel_configure_variable NFS_FS y + kernel_configure_variable ROOT_NFS y + kernel_configure_variable ROOT_NFS y + kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\"" + fi + + # Activate CONFIG_LEGACY_PTYS + kernel_configure_variable LEGACY_PTYS y + + # Keep this the last line + # Remove all modified configs and add the rest to .config + sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${S}/.config' + + yes '' | oe_runmake oldconfig } # Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
Signature · 1 line
1.8.1.4
PATCH 3/4 Make Linux 3.6 the default for Raspberry Pi
In reply to [email protected]From: Philipp Wagner <[email protected]>
Kernel 3.6 is also the default for Raspbian and thus should be the most tested version right now.
--- conf/machine/include/rpi-default-providers.inc | 3 +++ 1 file changed, 3 insertions(+)
conf/machine/include/rpi-default-providers.inc +3 -0
@@ -1,6 +1,9 @@ # RaspberryPi BSP default providers PREFERRED_PROVIDER_virtual/kernel = "linux-raspberrypi" +# The default kernel version is the same as used by Raspbian +PREFERRED_VERSION_linux-raspberrypi ?= "3.6.%" + PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg" PREFERRED_PROVIDER_virtual/egl ?= "userland" PREFERRED_PROVIDER_virtual/libgles2 ?= "userland"
Signature · 1 line
1.8.1.4
PATCH 4/4 Add kernel 3.8 and 3.11 for Raspberry Pi
In reply to [email protected]From: Philipp Wagner <[email protected]>
--- recipes-kernel/linux/linux-raspberrypi_3.11.0.bb | 6 ++++++ recipes-kernel/linux/linux-raspberrypi_3.8.13.bb | 6 ++++++ 2 files changed, 12 insertions(+) create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.11.0.bb create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.8.13.bb
recipes-kernel/linux/linux-raspberrypi_3.11.0.bb new file +6 -0
@@ -0,0 +1,6 @@ +SRCREV = "d7474694bdc9836af17f4b4d839509f9aad7ffa7" +SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.11.y \ + file://sl030raspberrypii2ckernel.patch \ + " + +require linux-raspberrypi.inc
recipes-kernel/linux/linux-raspberrypi_3.8.13.bb new file +6 -0
@@ -0,0 +1,6 @@ +SRCREV = "d996a1b91b2bf3dc06f4f4f822a56f4496457aa1" +SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.8.y \ + file://sl030raspberrypii2ckernel.patch \ + " + +require linux-raspberrypi.inc
Signature · 1 line
1.8.1.4
Quoted 32 lines · On 10 September 2013 23:36, <[email protected]> wrote:
From: Philipp Wagner <[email protected]>
Hi,
as follow-up to the discussion in
[yocto] [meta-raspberrypi][PATCH] linux-raspberrypi: Add version 3.8.13 I've refactored the kernel recipes a bit and included all discussed kernel versions. The default is now 3.6.I've left linux.inc as-is, as this seems to be copied from meta-oe. Should we include this directly instead of copying it here?
Philipp
Philipp Wagner (4):
Refactor kernel recipes to reduce code duplication Remove tabs from recipe
Make Linux 3.6 the default for Raspberry Pi Add kernel 3.8 and 3.11 for Raspberry Piconf/machine/include/rpi-default-providers.inc | 3 + recipes-kernel/linux/linux-raspberrypi.inc | 34 +++++ recipes-kernel/linux/linux-raspberrypi_3.11.0.bb | 6 + recipes-kernel/linux/linux-raspberrypi_3.2.27.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.6.11.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.8.13.bb | 6 + recipes-kernel/linux/linux.inc | 174 +++++++++++------------ 7 files changed, 140 insertions(+), 149 deletions(-) create mode 100644 recipes-kernel/linux/linux-raspberrypi.inc create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.11.0.bb create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.8.13.bb
Quoted 2 lines
--
1.8.1.4
Testing this now with PREFERRED_VERSION_linux-raspberrypi = "3.8%".
Signature · 4 lines
Paul Barker Email: [email protected] http://www.paulbarker.me.uk
Paul Barker
Tested-byQuoted 33 lines · Paul Barker
Quoted 32 lines · On 10 September 2013 23:36, <[email protected]> wrote:
From: Philipp Wagner <[email protected]>
Hi,
as follow-up to the discussion in
[yocto] [meta-raspberrypi][PATCH] linux-raspberrypi: Add version 3.8.13 I've refactored the kernel recipes a bit and included all discussed kernel versions. The default is now 3.6.I've left linux.inc as-is, as this seems to be copied from meta-oe. Should we include this directly instead of copying it here?
Philipp
Philipp Wagner (4):
Refactor kernel recipes to reduce code duplication Remove tabs from recipe
Make Linux 3.6 the default for Raspberry Pi Add kernel 3.8 and 3.11 for Raspberry Piconf/machine/include/rpi-default-providers.inc | 3 + recipes-kernel/linux/linux-raspberrypi.inc | 34 +++++ recipes-kernel/linux/linux-raspberrypi_3.11.0.bb | 6 + recipes-kernel/linux/linux-raspberrypi_3.2.27.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.6.11.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.8.13.bb | 6 + recipes-kernel/linux/linux.inc | 174 +++++++++++------------ 7 files changed, 140 insertions(+), 149 deletions(-) create mode 100644 recipes-kernel/linux/linux-raspberrypi.inc create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.11.0.bb create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.8.13.bb
Quoted 5 lines
Quoted 2 lines
--
1.8.1.4Testing this now with PREFERRED_VERSION_linux-raspberrypi = "3.8%".
Builds and boots happily.
Signature · 4 lines
Paul Barker Email: [email protected] http://www.paulbarker.me.uk
Quoted 37 lines · Paul Barker
Quoted 36 lines · Paul Barker
Quoted 34 lines · On 10 September 2013 23:36, <[email protected]> wrote:
From: Philipp Wagner <[email protected]>
Hi,
as follow-up to the discussion in
[yocto] [meta-raspberrypi][PATCH] linux-raspberrypi: Add version 3.8.13 I've refactored the kernel recipes a bit and included all discussed kernel versions. The default is now 3.6.I've left linux.inc as-is, as this seems to be copied from meta-oe. Should we include this directly instead of copying it here?
Philipp
Philipp Wagner (4):
Refactor kernel recipes to reduce code duplication Remove tabs from recipe
Make Linux 3.6 the default for Raspberry Pi Add kernel 3.8 and 3.11 for Raspberry Piconf/machine/include/rpi-default-providers.inc | 3 + recipes-kernel/linux/linux-raspberrypi.inc | 34 +++++ recipes-kernel/linux/linux-raspberrypi_3.11.0.bb | 6 + recipes-kernel/linux/linux-raspberrypi_3.2.27.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.6.11.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.8.13.bb | 6 + recipes-kernel/linux/linux.inc | 174 +++++++++++------------ 7 files changed, 140 insertions(+), 149 deletions(-) create mode 100644 recipes-kernel/linux/linux-raspberrypi.inc create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.11.0.bb create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.8.13.bb--
1.8.1.4
Quoted 7 lines
Quoted 2 lines
Testing this now with PREFERRED_VERSION_linux-raspberrypi = "3.8%".
Builds and boots happily.
Tested-by Paul Barker <[email protected]>
Ping on this series as well. Think it'd be really good to get the newer kernel recipes into the repository.
Signature · 4 lines
Paul Barker Email: [email protected] http://www.paulbarker.me.uk
Quoted 43 lines · Paul Barker
Quoted 4 lines · Paul Barker
Quoted 3 lines · Paul Barker
Quoted 2 lines · On 10 September 2013 23:36, <[email protected]> wrote:
From: Philipp Wagner <[email protected]>
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Hi,
as follow-up to the discussion in
[yocto] [meta-raspberrypi][PATCH] linux-raspberrypi: Add version 3.8.13 I've refactored the kernel recipes a bit and included all discussed kernel versions. The default is now 3.6.I've left linux.inc as-is, as this seems to be copied from meta-oe.
Should
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
we include this directly instead of copying it here?
Philipp
Philipp Wagner (4):
Refactor kernel recipes to reduce code duplication Remove tabs from recipe
Make Linux 3.6 the default for Raspberry Pi Add kernel 3.8 and 3.11 for Raspberry PiQuoted 7 lines
Quoted 7 lines
Quoted 7 lines
conf/machine/include/rpi-default-providers.inc | 3 + recipes-kernel/linux/linux-raspberrypi.inc | 34 +++++ recipes-kernel/linux/linux-raspberrypi_3.11.0.bb | 6 + recipes-kernel/linux/linux-raspberrypi_3.2.27.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.6.11.bb | 33 +---- recipes-kernel/linux/linux-raspberrypi_3.8.13.bb | 6 + recipes-kernel/linux/linux.inc | 174+++++++++++------------
Quoted 11 lines
Quoted 10 lines
Quoted 7 lines
7 files changed, 140 insertions(+), 149 deletions(-) create mode 100644 recipes-kernel/linux/linux-raspberrypi.inc create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.11.0.bb create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.8.13.bb--
1.8.1.4Testing this now with PREFERRED_VERSION_linux-raspberrypi = "3.8%".
Quoted 9 lines
Quoted 4 lines
Builds and boots happily.
Tested-by Paul Barker <[email protected]>Ping on this series as well. Think it'd be really good to get the newer kernel recipes into the repository.
Merged.
Thanks,
ag