hwmon: Remove unnecessary semicolons
Subsystems (2)
Guenter Roeck
maintainerPATCH 1/12 hwmon: Remove unnecessary semicolons
Semicolons after closing } of conditional blocks are not needed and can be removed.
Signed-off-by Guenter Roeck <[email protected]>
--- drivers/hwmon/adm1026.c | 6 +++--- drivers/hwmon/asc7621.c | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-)
drivers/hwmon/adm1026.c +3 -3
@@ -616,7 +616,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev) data->gpio = gpio; data->last_reading = jiffies; - };/* last_reading */ + }/* last_reading */ if (!data->valid ||time_after (jiffies, data->last_config +ADM1026_CONFIG_INTERVAL )) {
@@ -700,7 +700,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev) } data->last_config = jiffies; - };/* last_config */ + }/* last_config */ data->valid =1 ;mutex_unlock (&data->update_lock);
@@ -1791,7 +1791,7 @@ static int adm1026_detect(struct i2c_client *client,if (!i2c_check_functionality (adapter,I2C_FUNC_SMBUS_BYTE_DATA )) {/* We need to be able to do byte I/O */ return -ENODEV ; - }; + }/* Now, we do the remaining detection. */
drivers/hwmon/asc7621.c +6 -6
@@ -138,7 +138,7 @@ static inline u8 read_byte(struct i2c_client *client, u8 reg)dev_err (&client->dev,"Unable to read from register 0x%02x.\n" , reg);return 0 ; - }; + }return res &0xff ; }
@@ -149,7 +149,7 @@ static inline int write_byte(struct i2c_client *client, u8 reg, u8 data)dev_err (&client->dev,"Unable to write value 0x%02x to register 0x%02x.\n" , data, reg); - }; + }return res; }
@@ -1030,7 +1030,7 @@ static struct asc7621_data *asc7621_update_device(struct device *dev) } } data->last_high_reading = jiffies; - };/* last_reading */ + }/* last_reading */ /* Read all the low priority registers. */
@@ -1044,7 +1044,7 @@ static struct asc7621_data *asc7621_update_device(struct device *dev) } } data->last_low_reading = jiffies; - };/* last_reading */ + }/* last_reading */ data->valid =1 ;
@@ -1084,11 +1084,11 @@ static void asc7621_init_client(struct i2c_client *client)dev_err (&client->dev,"Client (%d,0x%02x) config is locked.\n" ,i2c_adapter_id (client->adapter), client->addr); - }; + }if (!(value &0x04 )) {dev_err (&client->dev,"Client (%d,0x%02x) is not ready.\n" ,i2c_adapter_id (client->adapter), client->addr); - }; + }/* * Start monitoring
Signature · 7 lines
1.7.9.7 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 9 lines · Guenter Roeck
Semicolons after closing } of conditional blocks are not needed and can be removed.
Signed-off-by Guenter Roeck <[email protected]>--- drivers/hwmon/adm1026.c | 6 +++--- drivers/hwmon/asc7621.c | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-)(...)
Reviewed-by Jean Delvare <[email protected]>
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors