Skip to contentSkip to conversation

Staging: winbond: Fixed some coding style issues

PATCH In review Iker Pedrosa 5 participants 32 messages Sep 16, 2013 – Sep 26, 2013 1 message not in the archive Staging

lore
Share & tools
lore
#0 lore raw

v2 cover Staging: winbond: Fixed some coding style issues

Fixes some coding style issues from drivers/staging/winbond

Iker Pedrosa (24):
Staging: winbond: mto: removed function declaration
Staging: winbond: mto: avoided use of extern functions
Staging: winbond: mto: deleted extern functions
Staging: winbond: phy_calibration: first of the patches that fixes
lines over 80 characters
Staging: winbond: phy_calibration: second of the patches that fixes
lines over 80 characters
Staging: winbond: reg: erased trailing whitespace
Staging: winbond: reg: white space deleted
Staging: winbond: reg: changed sleep function from msleep to usleep
Staging: winbond: reg: first of the patches that fixes lines over 80
characters
Staging: winbond: reg: second of the patches that fixes lines over 80
characters
Staging: winbond: reg: third of the patches that fixes lines over 80
characters
Staging: winbond: reg: fourth of the patches that fixes lines over 80
characters
Staging: winbond: reg: fifth of the patches that fixes lines over 80
characters
Staging: winbond: reg: sixth of the patches that fixes lines over 80
characters
Staging: winbond: reg: seventh of the patches that fixes lines over 80
characters
Staging: winbond: wb35reg_f: fixed lines over 80 characters
Staging: winbond: wb35reg_s: deleted space before tabulation
Staging: winbond: wb35rx: changed sleep function from msleep to usleep
Staging: winbond: wb35rx: fixed some lines over 80 characters
Staging: winbond: wb35tx: changed sleep function from msleep to usleep
Staging: winbond: wb35tx: Replace printk with netdev_err
Staging: winbond: wb35tx_s: erased the spaces after opening a '['
Staging: winbond: wbusb: fixed some lines over 80 characters
Staging: winbond: wbusb: changed sleep function from msleep to usleep

 drivers/staging/winbond/mto.c             |   7 +-
 drivers/staging/winbond/mto.h             |   8 +-
 drivers/staging/winbond/phy_calibration.c |  58 ++++---
 drivers/staging/winbond/reg.c             | 272 ++++++++++++++++++------------
 drivers/staging/winbond/wb35reg_f.h       |  18 +-
 drivers/staging/winbond/wb35reg_s.h       |   2 +-
 drivers/staging/winbond/wb35rx.c          |  11 +-
 drivers/staging/winbond/wb35tx.c          |  12 +-
 drivers/staging/winbond/wb35tx_s.h        |   2 +-
 drivers/staging/winbond/wbusb.c           |  18 +-
 10 files changed, 239 insertions(+), 169 deletions(-)
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH v2 1/24 Staging: winbond: mto: removed function declaration

The following function declarations have been removed because they aren't implemented.

---
 drivers/staging/winbond/mto.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/staging/winbond/mto.c +0 -3
index 560c0ab..0d0f9fb 100644
@@ -46,10 +46,7 @@ static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS];
 static u8 boSparseTxTraffic;
 
 void MTO_Init(struct wbsoft_priv *adapter);
-void TxRateReductionCtrl(struct wbsoft_priv *adapter);
 void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
-void MTO_TxFailed(struct wbsoft_priv *adapter);
-void hal_get_dto_para(struct wbsoft_priv *adapter, char *buffer);
 
 /*
  * ===========================================================================
Signature · 1 line
1.8.1.2
#2 lore raw

PATCH v2 2/24 Staging: winbond: mto: avoided use of extern functions

In reply to Iker Pedrosa

Prototype of two functions added to the header to avoid the use of extern.

---
 drivers/staging/winbond/mto.c | 4 +---
 drivers/staging/winbond/mto.h | 4 ++--
 2 files changed, 3 insertions(+), 5 deletions(-)
drivers/staging/winbond/mto.c +1 -3
index 0d0f9fb..b031ecd 100644
@@ -21,6 +21,7 @@
 #include "wbhal.h"
 #include "wb35reg_f.h"
 #include "core.h"
+#include "mto.h"
 
 /* Declare SQ3 to rate and fragmentation threshold table */
 /* Declare fragmentation threshold table */
@@ -45,9 +46,6 @@ static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS];
 
 static u8 boSparseTxTraffic;
 
-void MTO_Init(struct wbsoft_priv *adapter);
-void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
-
 /*
  * ===========================================================================
  * MTO_Init --
drivers/staging/winbond/mto.h +2 -2
index a0f659c..22bb264 100644
@@ -127,12 +127,12 @@ extern u16 MTO_Frag_Th_Tbl[];
 #define MTO_DATA_RATE()			MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()]
 #define MTO_FRAG_TH()			MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()]
 
-extern void MTO_Init(struct wbsoft_priv *);
+void MTO_Init(struct wbsoft_priv *);
+void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
 extern void MTO_PeriodicTimerExpired(struct wbsoft_priv *);
 extern void MTO_SetDTORateRange(struct wbsoft_priv *, u8 *, u8);
 extern u8 MTO_GetTxRate(struct wbsoft_priv *adapter, u32 fpdu_len);
 extern u8 MTO_GetTxFallbackRate(struct wbsoft_priv *adapter);
-extern void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
 
 #endif /* __MTO_H__ */
 
Signature · 1 line
1.8.1.2
#3 lore raw

PATCH v2 3/24 Staging: winbond: mto: deleted extern functions

In reply to Iker Pedrosa

Deleted declaration of external functions that weren't used on this driver.

---
 drivers/staging/winbond/mto.h | 4 ----
 1 file changed, 4 deletions(-)
drivers/staging/winbond/mto.h +0 -4
index 22bb264..8d41eed 100644
@@ -129,10 +129,6 @@ extern u16 MTO_Frag_Th_Tbl[];
 
 void MTO_Init(struct wbsoft_priv *);
 void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
-extern void MTO_PeriodicTimerExpired(struct wbsoft_priv *);
-extern void MTO_SetDTORateRange(struct wbsoft_priv *, u8 *, u8);
-extern u8 MTO_GetTxRate(struct wbsoft_priv *adapter, u32 fpdu_len);
-extern u8 MTO_GetTxFallbackRate(struct wbsoft_priv *adapter);
 
 #endif /* __MTO_H__ */
 
Signature · 1 line
1.8.1.2
#4 lore raw

PATCH v2 4/24 Staging: winbond: phy_calibration: first of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

First of the patches that fixes the lines over 80 characters in phy_calibration.c

---
 drivers/staging/winbond/phy_calibration.c | 46 ++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 19 deletions(-)
drivers/staging/winbond/phy_calibration.c +27 -19
index cfbfbbb..6635c85 100644
@@ -27,10 +27,12 @@
 #define DEG2RAD(X)      (0.017453 * (X))
 
 static const s32 Angles[] = {
-	FIXED(DEG2RAD(45.0)),     FIXED(DEG2RAD(26.565)),   FIXED(DEG2RAD(14.0362)),
-	FIXED(DEG2RAD(7.12502)),  FIXED(DEG2RAD(3.57633)),  FIXED(DEG2RAD(1.78991)),
-	FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)), FIXED(DEG2RAD(0.223811)),
-	FIXED(DEG2RAD(0.111906)), FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
+	FIXED(DEG2RAD(45.0)),     FIXED(DEG2RAD(26.565)),
+	FIXED(DEG2RAD(14.0362)),  FIXED(DEG2RAD(7.12502)),
+	FIXED(DEG2RAD(3.57633)),  FIXED(DEG2RAD(1.78991)),
+	FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)),
+	FIXED(DEG2RAD(0.223811)), FIXED(DEG2RAD(0.111906)),
+	FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
 };
 
 /****************** LOCAL FUNCTION DECLARATION SECTION **********************/
@@ -296,7 +298,8 @@ void _sin_cos(s32 angle, s32 *sin, s32 *cos)
 	}
 }
 
-static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 *pValue)
+static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number,
+				     u32 *pValue)
 {
 	if (number < 0x1000)
 		number += 0x1000;
@@ -304,7 +307,8 @@ static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 *p
 }
 #define hw_get_dxx_reg(_A, _B, _C) hal_get_dxx_reg(_A, _B, (u32 *)_C)
 
-static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, u32 value)
+static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number,
+				     u32 value)
 {
 	unsigned char ret;
 
@@ -407,7 +411,8 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
 	PHY_DEBUG(("[CAL]    ** adc_dc_cal_i = %d (0x%04X)\n",
 			   _s9_to_s32(val&0x000001FF), val&0x000001FF));
 	PHY_DEBUG(("[CAL]    ** adc_dc_cal_q = %d (0x%04X)\n",
-			   _s9_to_s32((val&0x0003FE00)>>9), (val&0x0003FE00)>>9));
+			   _s9_to_s32((val&0x0003FE00)>>9),
+			   (val&0x0003FE00)>>9));
 #endif
 
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
@@ -535,7 +540,8 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 		}
 
 		PHY_DEBUG(("[CAL]    ** fix_cancel_dc_i = %d (0x%04X)\n",
-				   fix_cancel_dc_i, _s32_to_s5(fix_cancel_dc_i)));
+				   fix_cancel_dc_i,
+				   _s32_to_s5(fix_cancel_dc_i)));
 
 		if ((abs(mag_1-mag_0)*6) > mag_0)
 			break;
@@ -711,7 +717,8 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 	loop = LOOP_TIMES;
 
 	while (loop > 0) {
-		PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
+		PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n",
+				   (LOOP_TIMES-loop+1)));
 
 		iqcal_tone_i_avg = 0;
 		iqcal_tone_q_avg = 0;
@@ -719,8 +726,8 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			return 0;
 		for (capture_time = 0; capture_time < 10; capture_time++) {
 			/*
-			 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
-			 *    enable "IQ calibration Mode II"
+			 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start"
+			 *    to 0x1 to enable "IQ calibration Mode II"
 			 */
 			reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
 			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
@@ -749,8 +756,8 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
 			/*
-			 * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
-			 *    enable "IQ calibration Mode II"
+			 * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start"
+			 *    to 0x1 to enable "IQ calibration Mode II"
 			 */
 			/* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */
 			hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
@@ -766,7 +773,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
 			iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
 			PHY_DEBUG(("[CAL]    ** iqcal_tone_i = %d, iqcal_tone_q = %d\n",
-			iqcal_tone_i, iqcal_tone_q));
+					   iqcal_tone_i, iqcal_tone_q));
 			if (capture_time == 0)
 				continue;
 			else {
@@ -1146,7 +1153,8 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 	/* for (loop = 0; loop < LOOP_TIMES; loop++) */
 	loop = LOOP_TIMES;
 	while (loop > 0) {
-		PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
+		PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n",
+				   (LOOP_TIMES-loop+1)));
 		iqcal_tone_i_avg = 0;
 		iqcal_tone_q_avg = 0;
 		iqcal_image_i_avg = 0;
@@ -1199,13 +1207,13 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 
 		/* d. */
 		rot_tone_i_b = (iqcal_tone_i * iqcal_tone_i +
-						iqcal_tone_q * iqcal_tone_q) / 1024;
+					iqcal_tone_q * iqcal_tone_q) / 1024;
 		rot_tone_q_b = (iqcal_tone_i * iqcal_tone_q * (-1) +
-						iqcal_tone_q * iqcal_tone_i) / 1024;
+					iqcal_tone_q * iqcal_tone_i) / 1024;
 		rot_image_i_b = (iqcal_image_i * iqcal_tone_i -
-						 iqcal_image_q * iqcal_tone_q) / 1024;
+					iqcal_image_q * iqcal_tone_q) / 1024;
 		rot_image_q_b = (iqcal_image_i * iqcal_tone_q +
-						 iqcal_image_q * iqcal_tone_i) / 1024;
+					iqcal_image_q * iqcal_tone_i) / 1024;
 
 		PHY_DEBUG(("[CAL]    ** rot_tone_i_b  = %d\n", rot_tone_i_b));
 		PHY_DEBUG(("[CAL]    ** rot_tone_q_b  = %d\n", rot_tone_q_b));
Signature · 1 line
1.8.1.2
#5 lore raw

PATCH v2 5/24 Staging: winbond: phy_calibration: second of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Second of the patches that fixes the lines over 80 characters in phy_calibration.c

---
 drivers/staging/winbond/phy_calibration.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/staging/winbond/phy_calibration.c +8 -4
index 6635c85..7fc95ee 100644
@@ -1233,8 +1233,10 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		b_2 = (rot_image_q_b * 32768) / rot_tone_i_b -
 			phw_data->iq_rsdl_phase_tx_d2;
 
-		PHY_DEBUG(("[CAL]    ** iq_rsdl_gain_tx_d2 = %d\n", phw_data->iq_rsdl_gain_tx_d2));
-		PHY_DEBUG(("[CAL]    ** iq_rsdl_phase_tx_d2= %d\n", phw_data->iq_rsdl_phase_tx_d2));
+		PHY_DEBUG(("[CAL]    ** iq_rsdl_gain_tx_d2 = %d\n",
+			   phw_data->iq_rsdl_gain_tx_d2));
+		PHY_DEBUG(("[CAL]    ** iq_rsdl_phase_tx_d2= %d\n",
+			   phw_data->iq_rsdl_phase_tx_d2));
 		PHY_DEBUG(("[CAL]    ***** EPSILON/2 = %d\n", a_2));
 		PHY_DEBUG(("[CAL]    ***** THETA/2   = %d\n", b_2));
 
@@ -1280,7 +1282,8 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 
 		/* e. */
 		pwr_tone = (iqcal_tone_i*iqcal_tone_i + iqcal_tone_q*iqcal_tone_q);
-		pwr_image = (iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q)*factor;
+		pwr_image = (iqcal_image_i*iqcal_image_i +
+			     iqcal_image_q*iqcal_image_q)*factor;
 
 		PHY_DEBUG(("[CAL]    ** pwr_tone  = %d\n", pwr_tone));
 		PHY_DEBUG(("[CAL]    ** pwr_image  = %d\n", pwr_image));
@@ -1577,7 +1580,8 @@ unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data)
 
 		sqsum = iqcal_tone_i0*iqcal_tone_i0 + iqcal_tone_q0*iqcal_tone_q0;
 		iq_mag_0_tx = (s32) _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n", iq_mag_0_tx));
+		PHY_DEBUG(("[CAL]    ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n",
+			   iq_mag_0_tx));
 
 		if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750)
 			break;
Signature · 1 line
1.8.1.2
#6 lore raw

PATCH v2 6/24 Staging: winbond: reg: erased trailing whitespace

In reply to Iker Pedrosa

Erased all the errors given by checkpatch stating trailing whitespace.

---
 drivers/staging/winbond/reg.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/staging/winbond/reg.c +6 -6
index 75b7752..5883d23 100644
@@ -920,7 +920,7 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
 	Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff);
 }
 
-static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp, 
+static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp,
 					char number)
 {
 	u8	i;
@@ -930,7 +930,7 @@ static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp,
 	}
 }
 
-static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp, 
+static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp,
 					char number)
 {
 	u8	i;
@@ -1620,13 +1620,13 @@ void BBProcessor_initial(struct hw_data *pHwData)
 		reg->SQ3_filter[i] = 0x2f; /* half of Bit 0 ~ 6 */
 }
 
-static inline void set_tx_power_per_channel_max2829(struct hw_data *pHwData,  
+static inline void set_tx_power_per_channel_max2829(struct hw_data *pHwData,
 						struct chan_info Channel)
 {
 	RFSynthesizer_SetPowerIndex(pHwData, 100);
 }
 
-static void set_tx_power_per_channel_al2230(struct hw_data *pHwData,  
+static void set_tx_power_per_channel_al2230(struct hw_data *pHwData,
 					struct chan_info Channel)
 {
 	u8	index = 100;
@@ -1636,7 +1636,7 @@ static void set_tx_power_per_channel_al2230(struct hw_data *pHwData,
 	RFSynthesizer_SetPowerIndex(pHwData, index);
 }
 
-static void set_tx_power_per_channel_al7230(struct hw_data *pHwData,  
+static void set_tx_power_per_channel_al7230(struct hw_data *pHwData,
 					struct chan_info Channel)
 {
 	u8	i, index = 100;
@@ -1660,7 +1660,7 @@ static void set_tx_power_per_channel_al7230(struct hw_data *pHwData,
 	RFSynthesizer_SetPowerIndex(pHwData, index);
 }
 
-static void set_tx_power_per_channel_wb242(struct hw_data *pHwData,  
+static void set_tx_power_per_channel_wb242(struct hw_data *pHwData,
 					struct chan_info Channel)
 {
 	u8	index = 100;
Signature · 1 line
1.8.1.2
#7 lore raw

PATCH v2 7/24 Staging: winbond: reg: white space deleted

In reply to Iker Pedrosa

White space deleted before semicolons.

---
 drivers/staging/winbond/reg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/winbond/reg.c +2 -2
index 5883d23..80b4b34 100644
@@ -1088,7 +1088,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		msleep(5);
 
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp) ;
+		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
 		pHwData->reg.BB50 &= ~0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
@@ -2096,7 +2096,7 @@ void Mxx_initial(struct hw_data *pHwData)
 	pltmp[5] = reg->M38_MacControl;
 
 	/* M3C */
-	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST ;
+	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST;
 	reg->M3C_MacControl = tmp;
 	pltmp[6] = tmp;
 
Signature · 1 line
1.8.1.2
#8 lore raw

PATCH v2 8/24 Staging: winbond: reg: changed sleep function from msleep to usleep

In reply to Iker Pedrosa

According to the documentation it is not recommended to use msleep for 1ms - 20ms because it may sleep longer than 20ms. So, it is recommended to use usleep instead.

In the first revision Greg KH pointed out that this change broke the build. In my computer it builds properly so if someone has the same problem please copy the output so that I can figure out what is the problem.

---
 drivers/staging/winbond/reg.c | 54 +++++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/staging/winbond/reg.c +27 -27
index 80b4b34..c023fda 100644
@@ -890,9 +890,9 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
 	else {
 		Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
 		Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
-		msleep(10);
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
-		msleep(10);
+		usleep(10000);
+		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on */
+		usleep(10000);
 		ltmp = 0x4968;
 		if ((pHwData->phy_type == RF_WB_242) ||
 			(RF_WB_242_1 == pHwData->phy_type))
@@ -905,7 +905,7 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
 		Wb35Reg_ReadSync(pHwData, 0x03d0, &ltmp);
 		loop = 500; /* Wait for 5 second */
 		while (!(ltmp & 0x20) && loop--) {
-			msleep(10);
+			usleep(10000);
 			if (!Wb35Reg_ReadSync(pHwData, 0x03d0, &ltmp))
 				break;
 		}
@@ -914,7 +914,7 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
 	}
 
 	Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
-	msleep(10);
+	usleep(10000);
 
 	/* Set burst write delay */
 	Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff);
@@ -1055,18 +1055,18 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 	case RF_AIROHA_2230:
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x07 << 20) | 0xE168E, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(10);
+		usleep(10000);
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[7], 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(10);
+		usleep(10000);
 	case RF_AIROHA_2230S:
 		Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
-		msleep(10);
+		usleep(10000);
 		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
-		msleep(10);
+		usleep(10000);
 		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
 		Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
-		msleep(10);
+		usleep(10000);
 		/* ========================================================= */
 
 		/* The follow code doesn't use the burst-write mode */
@@ -1077,15 +1077,15 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
 		pHwData->reg.BB50 |= 0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START) */
 		Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-		msleep(5);
+		usleep(5000);
 
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01B0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01E0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 
 		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
@@ -1102,13 +1102,13 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* 2.4GHz */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 
 		/* 5GHz */
 		Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
@@ -1119,20 +1119,20 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* Write to register. number must less and equal than 16 */
 		for (i = 0; i < number; i++)
 			Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
-		msleep(5);
+		usleep(5000);
 
 		Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
 		pr_debug("* PLL_ON    high\n");
 
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		break;
 	case RF_WB_242:
 	case RF_WB_242_1:
@@ -1147,11 +1147,11 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* Calibration (1a.0). Synthesizer reset */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00101E, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		/* Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFE69c0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
+		usleep(2000);
 
 		/* ----- Calibration (2). TX baseband Gm-C filter auto-tuning */
 		/* Calibration (2a). turn off ENCAL signal */
@@ -1210,7 +1210,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
+		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
@@ -1222,7 +1222,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
+		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
@@ -1234,7 +1234,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
+		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
@@ -1246,7 +1246,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
+		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
@@ -1258,7 +1258,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* 0x00 0xF86100 ; 3E184   ; Switch RF chip to normal mode */
 		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
+		usleep(5000);
 		break;
 	}
 }
Signature · 1 line
1.8.1.2
maintainer
#9 lore raw

Re: [PATCH v2 08/24] Staging: winbond: reg: changed sleep function from msleep to usleep

Quoted 3 lines · Iker Pedrosa

According to the documentation it is not recommended to use msleep for 1ms - 20ms because it may sleep longer than 20ms. So, it is recommended to use usleep instead.

In the first revision Greg KH pointed out that this change broke the build. In my computer it builds properly so if someone has the same problem please copy the output so that I can figure out what is the problem.

Please wrap your changelog comments.

The error is:
drivers/staging/winbond/reg.c: In function ‘Uxx_power_on_procedure’:
drivers/staging/winbond/reg.c:887:3: error: implicit declaration of function ‘usleep’ [-Werror=implicit-function-declaration]

And I'm still getting it on this patch, so please fix it up, it should be pretty obvious how to do it...

I've applied the first 7 patches here, but stopped now. Please fix this up and resend the remaining patches.

thanks,

greg k-h

#10 lore raw

PATCH v2 9/24 Staging: winbond: reg: first of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

First of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)
drivers/staging/winbond/reg.c +10 -16
index c023fda..429c28e 100644
@@ -809,12 +809,7 @@ u32 w89rf242_txvga_data[][5] = {
 	{(0x05 << 24) | 0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242}
 };
 
-/* ================================================================================================== */
-
-
-
 /*
- * =============================================================================================================
  *  Uxx_ReadEthernetAddress --
  *
  *  Routine Description:
@@ -826,15 +821,15 @@ u32 w89rf242_txvga_data[][5] = {
  *  Return Value:
  *
  *    The address is stored in EthernetIDAddr.
- * =============================================================================================================
  */
 void Uxx_ReadEthernetAddress(struct hw_data *pHwData)
 {
 	u32	ltmp;
 
 	/*
-	 * Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
-	 * Only unplug and plug again can make hardware read EEPROM again.
+	 * Reading Ethernet address from EEPROM and set into hardware due to
+	 * MAC address maybe change. Only unplug and plug again can make
+	 * hardware read EEPROM again.
 	 */
 	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08000000); /* Start EEPROM access + Read + address(0x0d) */
 	Wb35Reg_ReadSync(pHwData, 0x03b4, &ltmp);
@@ -852,18 +847,17 @@ void Uxx_ReadEthernetAddress(struct hw_data *pHwData)
 
 
 /*
- * ===============================================================================================================
  *  CardGetMulticastBit --
  *  Description:
- *    For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
- *    Calls CardComputeCrc() to determine the CRC value.
+ *    For a given multicast address, returns the byte and bit in the card
+ *    multicast registers that it hashes to. Calls CardComputeCrc() to
+ *    determine the CRC value.
  *  Arguments:
  *    Address - the address
  *    Byte - the byte that it hashes to
  *    Value - will have a 1 in the relevant bit
  *  Return Value:
  *    None.
- * ==============================================================================================================
  */
 void CardGetMulticastBit(u8 Address[ETH_ALEN], u8 *Byte, u8 *Value)
 {
@@ -926,7 +920,8 @@ static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp,
 	u8	i;
 	for (i = 0; i < number; i++) {
 		pHwData->phy_para[i] = al7230_rf_data_24[i];
-		pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i] & 0xffffff);
+		pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) |
+			   (al7230_rf_data_24[i] & 0xffffff);
 	}
 }
 
@@ -936,15 +931,14 @@ static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp,
 	u8	i;
 	for (i = 0; i < number; i++) {
 		pHwData->phy_para[i] = al7230_rf_data_50[i];
-		pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i] & 0xffffff);
+		pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24)
+				   | (al7230_rf_data_50[i] & 0xffffff);
 	}
 }
 
 
 /*
- * =============================================================================================================
  * RFSynthesizer_initial --
- * =============================================================================================================
  */
 void RFSynthesizer_initial(struct hw_data *pHwData)
 {
Signature · 1 line
1.8.1.2
#11 lore raw

PATCH v2 10/24 Staging: winbond: reg: second of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Second of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)
drivers/staging/winbond/reg.c +20 -10
index 429c28e..a65e8ce 100644
@@ -964,42 +964,48 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		number = ARRAY_SIZE(max2825_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18);
+			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24)
+					   | BitReverse(max2825_rf_data[i], 18);
 		}
 		break;
 	case RF_MAXIM_2827:
 		number = ARRAY_SIZE(max2827_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2827_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18);
+			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24)
+					   | BitReverse(max2827_rf_data[i], 18);
 		}
 		break;
 	case RF_MAXIM_2828:
 		number = ARRAY_SIZE(max2828_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2828_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18);
+			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24)
+					   | BitReverse(max2828_rf_data[i], 18);
 		}
 		break;
 	case RF_MAXIM_2829:
 		number = ARRAY_SIZE(max2829_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2829_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18);
+			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24)
+					   | BitReverse(max2829_rf_data[i], 18);
 		}
 		break;
 	case RF_AIROHA_2230:
 		number = ARRAY_SIZE(al2230_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = al2230_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20);
+			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24)
+					   | BitReverse(al2230_rf_data[i], 20);
 		}
 		break;
 	case RF_AIROHA_2230S:
 		number = ARRAY_SIZE(al2230s_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = al2230s_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20);
+			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24)
+					   | BitReverse(al2230s_rf_data[i], 20);
 		}
 		break;
 	case RF_AIROHA_7230:
@@ -1020,7 +1026,8 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 			}
 
 			pHwData->phy_para[i] = ltmp;
-			pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(ltmp, 24);
+			pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24)
+					   | BitReverse(ltmp, 24);
 		}
 		break;
 	}
@@ -1047,10 +1054,12 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 
 	switch (pHwData->phy_type) {
 	case RF_AIROHA_2230:
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x07 << 20) | 0xE168E, 20);
+		ltmp = (1 << 31) | (0 << 30) | (20 << 24)
+			       | BitReverse((0x07 << 20) | 0xE168E, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(10000);
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[7], 20);
+		ltmp = (1 << 31) | (0 << 30) | (20 << 24)
+			       | BitReverse(al2230_rf_data[7], 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(10000);
 	case RF_AIROHA_2230S:
@@ -1064,7 +1073,8 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		/* ========================================================= */
 
 		/* The follow code doesn't use the burst-write mode */
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F<<20) | 0xF01A0, 20);
+		ltmp = (1 << 31) | (0 << 30) | (20 << 24)
+			       | BitReverse((0x0F<<20) | 0xF01A0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		ltmp = pHwData->reg.BB5C & 0xfffff000;
Signature · 1 line
1.8.1.2
#12 lore raw

PATCH v2 11/24 Staging: winbond: reg: third of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Third of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)
drivers/staging/winbond/reg.c +20 -10
index a65e8ce..6aae4da 100644
@@ -1083,15 +1083,18 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
 		usleep(5000);
 
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01B0, 20);
+		ltmp = (1 << 31) | (0 << 30) | (20 << 24)
+			       | BitReverse((0x0F << 20) | 0xF01B0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(5000);
 
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01E0, 20);
+		ltmp = (1 << 31) | (0 << 30) | (20 << 24)
+			       | BitReverse((0x0F << 20) | 0xF01E0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(5000);
 
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
+		ltmp = (1 << 31) | (0 << 30) | (20 << 24)
+			       | BitReverse((0x0F << 20) | 0xF01A0, 20);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
@@ -1149,30 +1152,37 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 
 		/* ----- Calibration (1). VCO frequency calibration */
 		/* Calibration (1a.0). Synthesizer reset */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00101E, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x0F<<24) | 0x00101E, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(5000);
 		/* Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFE69c0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFE69c0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 
 		/* ----- Calibration (2). TX baseband Gm-C filter auto-tuning */
 		/* Calibration (2a). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xF8EBC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default) */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x07<<24) | 0x0C68CE, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (2b). send TX reset signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00201E, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x0F<<24) | 0x00201E, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (2c). turn-on TX Gm-C filter auto-tuning */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFCEBC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFCEBC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		udelay(150); /* Sleep 150 us */
 		/* turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xF8EBC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
Signature · 1 line
1.8.1.2
#13 lore raw

PATCH v2 12/24 Staging: winbond: reg: fourth of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Fourth of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)
drivers/staging/winbond/reg.c +22 -11
index 6aae4da..6d2ab1e 100644
@@ -1187,46 +1187,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 
 		/* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
 		/* Calibration (3a). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x07<<24) | 0x0C68CE, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (3b). send RX reset signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x0F<<24) | 0x00401E, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (3c). turn-on RX Gm-C filter auto-tuning */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFEEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		udelay(150); /* Sleep 150 us */
 		/* Calibration (3e). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* ----- Calibration (4). TX LO leakage calibration */
 		/* Calibration (4a). TX LO leakage calibration */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFD6BC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		udelay(150); /* Sleep 150 us */
 
 		/* ----- Calibration (5). RX DC offset calibration */
 		/* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5b). turn off AGC servo-loop & RSSI */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x01<<24) | 0xEBFFC2, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=11 -------- */
 		/* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x343FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=10 -------- */
Signature · 1 line
1.8.1.2
#14 lore raw

PATCH v2 13/24 Staging: winbond: reg: fifth of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Fifth of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)
drivers/staging/winbond/reg.c +22 -11
index 6d2ab1e..11b155f 100644
@@ -1242,46 +1242,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 
 		/* for LNA=10 -------- */
 		/* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x342FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=01 -------- */
 		/* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x341FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=00 -------- */
 		/* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x340FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5g). turn on AGC servo-loop */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x01<<24) | 0xEFFFC2, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* ----- Calibration (7). Switch RF chip to normal mode */
 		/* 0x00 0xF86100 ; 3E184   ; Switch RF chip to normal mode */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xF86100, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(5000);
 		break;
Signature · 1 line
1.8.1.2
#15 lore raw

PATCH v2 14/24 Staging: winbond: reg: sixth of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Sixth of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)
drivers/staging/winbond/reg.c +18 -10
index 11b155f..e51530e 100644
@@ -1728,7 +1728,8 @@ static void set_tx_power_per_channel_wb242(struct hw_data *pHwData,
  *   None.
  * ===========================================================================
  */
-void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,  struct chan_info Channel)
+void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,
+					   struct chan_info Channel)
 {
 	struct wb35_reg *reg = &pHwData->reg;
 	u32	pltmp[16]; /* The 16 is the maximum capability of hardware */
@@ -1881,9 +1882,9 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,  struct chan_info C
 		/* BB: select 5 GHz */
 		reg->BB50 &= ~(BIT(11) | BIT(12));
 		if (Channel.ChanNo <= 64)
-			reg->BB50 |= BIT(12);				/* 10-5.25GHz */
+			reg->BB50 |= BIT(12);			/* 10-5.25GHz */
 		else if ((Channel.ChanNo >= 100) && (Channel.ChanNo <= 124))
-			reg->BB50 |= BIT(11);				/* 01-5.48GHz */
+			reg->BB50 |= BIT(11);			/* 01-5.48GHz */
 		else if ((Channel.ChanNo >= 128) && (Channel.ChanNo <= 161))
 			reg->BB50 |= (BIT(12) | BIT(11));	/* 11-5.775GHz */
 		else	/* Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25 */
@@ -1958,7 +1959,8 @@ u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	if (index > 1)
 		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_24[index], 18);
+	PowerData = (1 << 31) | (0 << 30) | (18 << 24)
+			    | BitReverse(max2828_power_data_24[index], 18);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return index;
 }
@@ -1968,7 +1970,8 @@ u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	if (index > 1)
 		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_50[index], 18);
+	PowerData = (1 << 31) | (0 << 30) | (18 << 24)
+			    | BitReverse(max2828_power_data_50[index], 18);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return index;
 }
@@ -1978,7 +1981,8 @@ u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	if (index > 1)
 		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_24[index], 18);
+	PowerData = (1 << 31) | (0 << 30) | (18 << 24)
+			    | BitReverse(max2827_power_data_24[index], 18);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return index;
 }
@@ -1988,7 +1992,8 @@ u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	if (index > 1)
 		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_50[index], 18);
+	PowerData = (1 << 31) | (0 << 30) | (18 << 24)
+			    | BitReverse(max2827_power_data_50[index], 18);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return index;
 }
@@ -1998,7 +2003,8 @@ u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	if (index > 1)
 		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_power_data_24[index], 18);
+	PowerData = (1 << 31) | (0 << 30) | (18 << 24)
+			    | BitReverse(max2825_power_data_24[index], 18);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return index;
 }
@@ -2016,7 +2022,8 @@ u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index)
 	if (i == count)
 		i--;
 
-	PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_txvga_data[i][0], 20);
+	PowerData = (1 << 31) | (0 << 30) | (20 << 24)
+			    | BitReverse(al2230_txvga_data[i][0], 20);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return i;
 }
@@ -2033,7 +2040,8 @@ u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index)
 	}
 	if (i == count)
 		i--;
-	PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0] & 0xffffff);
+	PowerData = (1 << 31) | (0 << 30) | (24 << 24)
+			    | (al7230_txvga_data[i][0] & 0xffffff);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 	return i;
 }
Signature · 1 line
1.8.1.2
#16 lore raw

PATCH v2 15/24 Staging: winbond: reg: seventh of the patches that fixes lines over 80 characters

In reply to Iker Pedrosa

Seventh of the patches that fixes the lines over 80 characters in reg.c

---
 drivers/staging/winbond/reg.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
drivers/staging/winbond/reg.c +16 -8
index e51530e..3b19da8 100644
@@ -2060,7 +2060,8 @@ u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index)
 		i--;
 
 	/* Set TxVga into RF */
-	PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_txvga_data[i][0], 24);
+	PowerData = (1 << 31) | (0 << 30) | (24 << 24)
+			    | BitReverse(w89rf242_txvga_data[i][0], 24);
 	Wb35Reg_Write(pHwData, 0x0864, PowerData);
 
 	/* Update BB48 BB4C BB58 for high precision txvga */
@@ -2136,11 +2137,15 @@ void Mxx_initial(struct hw_data *pHwData)
 	pltmp[4] = tmp;
 
 	/* M38 */
-	reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
+	reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |
+				       (DEFAULT_LONG_RETRY_LIMIT << 4) |
+				       DEFAULT_SHORT_RETRY_LIMIT;
 	pltmp[5] = reg->M38_MacControl;
 
 	/* M3C */
-	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST;
+	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) |
+		       (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) |
+		       DEFAULT_OSIFST;
 	reg->M3C_MacControl = tmp;
 	pltmp[6] = tmp;
 
@@ -2163,7 +2168,9 @@ void Mxx_initial(struct hw_data *pHwData)
 	pltmp[9] = tmp;
 
 	/* M4C */
-	reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) | (DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24);
+	reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) |
+				      (DEFAULT_MAC_POWER_STATE << 28) |
+				      (DEFAULT_DTIM_ALERT_TIME << 24);
 	pltmp[10] = reg->M4C_MacStatus;
 
 	for (i = 0; i < 11; i++)
@@ -2235,10 +2242,11 @@ void GetTxVgaFromEEPROM(struct hw_data *pHwData)
 }
 
 /*
- * This function will affect the TxVga parameter in HAL. If hal_set_current_channel
- * or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
- * TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
- * This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
+ * This function will affect the TxVga parameter in HAL. If
+ * hal_set_current_channel or RFSynthesizer_SetPowerIndex be called, new TxVga
+ * will take effect. TxVgaSettingInEEPROM of sHwData is an u8 array point to
+ * EEPROM contain for IS89C35. This function will use default
+ * TxVgaSettingInEEPROM data to calculate new TxVga.
  */
 void EEPROMTxVgaAdjust(struct hw_data *pHwData)
 {
Signature · 1 line
1.8.1.2

A message that is not in the archive (sent off-list or not yet received): CANBXnMm7QCab3cU4NMzmA3OjXckcUx5dakyD_TRwfj3j2_02MA@mail.gmail.com

#18 lore raw

Re: [PATCH v2 15/24] Staging: winbond: reg: seventh of the patches that fixes lines over 80 characters

Quoted 12 lines · Adil Mujeeb

Hi,

Quoted 1 line

- PowerData = (1 << 31) | (0 << 30) | (24 << 24) |

BitReverse(w89rf242_txvga_data[i][0], 24);

Quoted 2 lines
drivers/staging/winbond/reg.c +2 -0
+       PowerData = (1 << 31) | (0 << 30) | (24 << 24)
+                           | BitReverse(w89rf242_txvga_data[i][0], 24);

.....
.....

Quoted 1 line

- reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |

(DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;

Quoted 9 lines

drivers/staging/winbond/reg.c void Mxx_initial(struct hw_data *pHwData) · line 2142

Quoted 3 lines
drivers/staging/winbond/reg.c +3 -0
+       reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |
+                                      (DEFAULT_LONG_RETRY_LIMIT << 4) |
+                                      DEFAULT_SHORT_RETRY_LIMIT;

I think consistency is needed. Either break the lines putting the OR operator ( | ) at the start of new line or at the end of each line. People has its own preference but here you have used both style in single file. Just a suggestion.

Put the '|' character at the end of the line. That's the New Unwritten Style Guidelines. Most of the kernel does it this way and it's easier to read.

But this could be fixed in a later patch instead of redoing the whole series.

regards,
dan carpenter

#19 lore raw

Re: [PATCH v2 15/24] Staging: winbond: reg: seventh of the patches that fixes lines over 80 characters

Quoted 27 lines · On Tue, 17 Sep 2013 12:43:26 +0300 Dan Carpenter <[email protected]>…
Quoted 12 lines · Adil Mujeeb

Hi,

Quoted 1 line

- PowerData = (1 << 31) | (0 << 30) | (24 << 24) |

BitReverse(w89rf242_txvga_data[i][0], 24);

Quoted 2 lines
drivers/staging/winbond/reg.c +2 -0
+       PowerData = (1 << 31) | (0 << 30) | (24 << 24)
+                           | BitReverse(w89rf242_txvga_data[i][0], 24);

.....
.....

Quoted 1 line

- reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |

(DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;

Quoted 9 lines

drivers/staging/winbond/reg.c void Mxx_initial(struct hw_data *pHwData) · line 2142

Quoted 3 lines
drivers/staging/winbond/reg.c +3 -0
+       reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |
+                                      (DEFAULT_LONG_RETRY_LIMIT << 4) |
+                                      DEFAULT_SHORT_RETRY_LIMIT;

I think consistency is needed. Either break the lines putting the OR operator ( | ) at the start of new line or at the end of each line. People has its own preference but here you have used both style in single file. Just a suggestion.

Put the '|' character at the end of the line. That's the New Unwritten Style Guidelines. Most of the kernel does it this way and it's easier to read.

Quoted 6 lines

But this could be fixed in a later patch instead of redoing the whole series.

regards,
dan carpenter

I will change it for the new version of this patch but I want to wait some days until everybody looks the patches that I've sent.

Signature · 3 lines
Regards,

Iker Pedrosa <[email protected]>
#20 lore raw

Re: [PATCH v2 15/24] Staging: winbond: reg: seventh of the patches that fixes lines over 80 characters

Quoted 33 lines · Iker Pedrosa
Quoted 30 lines · On Tue, 17 Sep 2013 12:43:26 +0300 Dan Carpenter <[email protected]>…
Quoted 12 lines · Adil Mujeeb

Hi,

Quoted 1 line

- PowerData = (1 << 31) | (0 << 30) | (24 << 24) |

BitReverse(w89rf242_txvga_data[i][0], 24);

Quoted 2 lines
drivers/staging/winbond/reg.c +2 -0
+       PowerData = (1 << 31) | (0 << 30) | (24 << 24)
+                           | BitReverse(w89rf242_txvga_data[i][0], 24);

.....
.....

Quoted 1 line

- reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |

(DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;

Quoted 9 lines

drivers/staging/winbond/reg.c void Mxx_initial(struct hw_data *pHwData) · line 2142

Quoted 3 lines
drivers/staging/winbond/reg.c +3 -0
+       reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |
+                                      (DEFAULT_LONG_RETRY_LIMIT << 4) |
+                                      DEFAULT_SHORT_RETRY_LIMIT;

I think consistency is needed. Either break the lines putting the OR operator ( | ) at the start of new line or at the end of each line. People has its own preference but here you have used both style in single file. Just a suggestion.

Put the '|' character at the end of the line. That's the New Unwritten Style Guidelines. Most of the kernel does it this way and it's easier to read.

But this could be fixed in a later patch instead of redoing the whole series.

Quoted 6 lines
Quoted 3 lines

regards,
dan carpenter

I will change it for the new version of this patch but I want to wait some days until everybody looks the patches that I've sent.

If they haven't looked after three days then they won't look. Greg will look over the patches but everyone else is done.

If you can redo this patch without changing any of the others then just redo it. But otherwise I would prefer if you do it in a follow on patch. It gets tiresome to review patchsets over and over.

Joe's comment on [PATCH v2 21/24] is correct. Technically the original code was buggy as well, but using dev_err() means it will generate a popup notification in Gnome so the new code is worse. Redo that one. Hopefully, you can just redo the one patch without redoing the following 3 patches.

So either send a single patch to Joe's comment, or send an email in reply to Joe's comment, "Ok. I will redo the last 4 patches". Use the --in-reply-to option of git to send email in reply to a thread. Pratice in an email to yourself before sending it to the list.

regards,
dan carpenter

#21 lore raw

PATCH v2 16/24 Staging: winbond: wb35reg_f: fixed lines over 80 characters

In reply to Iker Pedrosa

Fixed lines over 80 characters.

---
 drivers/staging/winbond/wb35reg_f.h | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/staging/winbond/wb35reg_f.h +12 -6
index 95dc980..cd6710c 100644
@@ -15,7 +15,8 @@ void Uxx_ReadEthernetAddress(struct hw_data *hw_data);
 void Dxx_initial(struct hw_data *hw_data);
 void Mxx_initial(struct hw_data *hw_data);
 void RFSynthesizer_initial(struct hw_data *hw_data);
-void RFSynthesizer_SwitchingChannel(struct hw_data *hw_data, struct chan_info channel);
+void RFSynthesizer_SwitchingChannel(struct hw_data *hw_data,
+					   struct chan_info channel);
 void BBProcessor_initial(struct hw_data *hw_data);
 void BBProcessor_RateChanging(struct hw_data *hw_data, u8 rate);
 u8 RFSynthesizer_SetPowerIndex(struct hw_data *hw_data, u8 power_index);
@@ -34,10 +35,14 @@ void EEPROMTxVgaAdjust(struct hw_data *hw_data);
 
 void Wb35Reg_destroy(struct hw_data *hw_data);
 
-unsigned char Wb35Reg_Read(struct hw_data *hw_data, u16 register_no, u32 *register_value);
-unsigned char Wb35Reg_ReadSync(struct hw_data *hw_data, u16 register_no, u32 *register_value);
-unsigned char Wb35Reg_Write(struct hw_data *hw_data, u16 register_no, u32 register_value);
-unsigned char Wb35Reg_WriteSync(struct hw_data *hw_data, u16 register_no, u32 register_value);
+unsigned char Wb35Reg_Read(struct hw_data *hw_data, u16 register_no,
+				   u32 *register_value);
+unsigned char Wb35Reg_ReadSync(struct hw_data *hw_data, u16 register_no,
+				   u32 *register_value);
+unsigned char Wb35Reg_Write(struct hw_data *hw_data, u16 register_no,
+				   u32 register_value);
+unsigned char Wb35Reg_WriteSync(struct hw_data *hw_data, u16 register_no,
+				   u32 register_value);
 unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *hw_data,
 							 u16 register_no,
 							 u32 register_value,
@@ -59,7 +64,8 @@ void CardGetMulticastBit(u8 address[MAC_ADDR_LENGTH], u8 *byte, u8 *value);
 u32 CardComputeCrc(u8 *buffer, u32 length);
 
 void Wb35Reg_phy_calibration(struct hw_data *hw_data);
-void Wb35Reg_Update(struct hw_data *hw_data, u16 register_no, u32 register_value);
+void Wb35Reg_Update(struct hw_data *hw_data, u16 register_no,
+			   u32 register_value);
 unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *hw_data);
 
 #endif
Signature · 1 line
1.8.1.2
#22 lore raw

PATCH v2 17/24 Staging: winbond: wb35reg_s: deleted space before tabulation

In reply to Iker Pedrosa

Deleted an space before a tabulation.

---
 drivers/staging/winbond/wb35reg_s.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/winbond/wb35reg_s.h +1 -1
index dc79faa..cdbbf35 100644
@@ -12,7 +12,7 @@ struct hw_data;
  *			HAL setting function
  *
  *		========================================
- *		|Uxx| 	|Dxx|	|Mxx|	|BB|	|RF|
+ *		|Uxx|	|Dxx|	|Mxx|	|BB|	|RF|
  *		========================================
  *			|					|
  *		Wb35Reg_Read		Wb35Reg_Write
Signature · 1 line
1.8.1.2
#23 lore raw

PATCH v2 18/24 Staging: winbond: wb35rx: changed sleep function from msleep to usleep

In reply to Iker Pedrosa

According to the documentation it is not recommended to use msleep for 1ms - 20ms because it may sleep longer than 20ms. So, it is recommended to use usleep instead.

---
 drivers/staging/winbond/wb35rx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/winbond/wb35rx.c +2 -2
index 8d71bc2..48ed95c 100644
@@ -339,9 +339,9 @@ void Wb35Rx_destroy(struct hw_data *pHwData)
 	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 
 	do {
-		msleep(10); /* Delay for waiting function enter */
+		usleep(10000); /* Delay for waiting function enter */
 	} while (pWb35Rx->EP3vm_state != VM_STOP);
-	msleep(10); /* Delay for waiting function exit */
+	usleep(10000); /* Delay for waiting function exit */
 
 	usb_free_urb(pWb35Rx->RxUrb);
 	pr_debug("Wb35Rx_destroy OK\n");
Signature · 1 line
1.8.1.2
#24 lore raw

PATCH v2 19/24 Staging: winbond: wb35rx: fixed some lines over 80 characters

In reply to Iker Pedrosa

Fixed some lines over 80 characters.

---
 drivers/staging/winbond/wb35rx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/staging/winbond/wb35rx.c +5 -2
index 48ed95c..999b7046 100644
@@ -16,7 +16,8 @@
 #include "core.h"
 #include "wb35rx_f.h"
 
-static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress, int PacketSize)
+static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress,
+				int PacketSize)
 {
 	struct wbsoft_priv *priv = hw->priv;
 	struct sk_buff *skb;
@@ -306,7 +307,9 @@ static void Wb35Rx_reset_descriptor(struct hw_data *pHwData)
 	pWb35Rx->EP3vm_state = VM_STOP;
 	pWb35Rx->rx_halt = 0;
 
-	/* Initial the Queue. The last buffer is reserved for used if the Rx resource is unavailable. */
+	/* Initial the Queue. The last buffer is reserved for used if the Rx
+	 * resource is unavailable.
+	*/
 	for (i = 0; i < MAX_USB_RX_BUFFER_NUMBER; i++)
 		pWb35Rx->RxOwner[i] = 1;
 }
Signature · 1 line
1.8.1.2
#25 lore raw

PATCH v2 20/24 Staging: winbond: wb35tx: changed sleep function from msleep to usleep

In reply to Iker Pedrosa

According to the documentation it is not recommended to use msleep for 1ms - 20ms because it may sleep longer than 20ms. So, it is recommended to use usleep instead.

In the first revision Greg KH pointed out that this change broke the build. In my computer it builds properly so if someone has the same problem please copy the output so that I can figure out what is the problem.

---
 drivers/staging/winbond/wb35tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/winbond/wb35tx.c +2 -2
index 30a77cc..8c25cbd 100644
@@ -166,9 +166,9 @@ void Wb35Tx_destroy(struct hw_data *pHwData)
 
 	/* Wait for VM stop */
 	do {
-		msleep(10); /* Delay for waiting function enter 940623.1.a */
+		usleep(10000); /* Delay for waiting function enter 940623.1.a */
 	} while ((pWb35Tx->EP2vm_state != VM_STOP) && (pWb35Tx->EP4vm_state != VM_STOP));
-	msleep(10); /* Delay for waiting function enter 940623.1.b */
+	usleep(10000); /* Delay for waiting function enter 940623.1.b */
 
 	usb_free_urb(pWb35Tx->Tx4Urb);
 	usb_free_urb(pWb35Tx->Tx2Urb);
Signature · 1 line
1.8.1.2
#26 lore raw

PATCH v2 21/24 Staging: winbond: wb35tx: Replace printk with netdev_err

In reply to Iker Pedrosa

The previously used printk lacked the warning level, now we've got a more accurate way to know the error.

---
 drivers/staging/winbond/wb35tx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/winbond/wb35tx.c +4 -4
index 8c25cbd..18b28f2 100644
@@ -32,7 +32,7 @@ static void Wb35Tx_complete(struct urb *pUrb)
 	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
 	struct wb35_mds *pMds = &adapter->Mds;
 
-	printk("wb35: tx complete\n");
+	netdev_err(pUrb->dev, "wb35: tx complete\n");
 	/* Variable setting */
 	pWb35Tx->EP4vm_state = VM_COMPLETED;
 	pWb35Tx->EP4VM_status = pUrb->status; /* Store the last result of Irp */
@@ -49,7 +49,7 @@ static void Wb35Tx_complete(struct urb *pUrb)
 
 	/* The URB is completed, check the result */
 	if (pWb35Tx->EP4VM_status != 0) {
-		printk("URB submission failed\n");
+		netdev_err(pUrb->dev, "URB submission failed\n");
 		pWb35Tx->EP4vm_state = VM_STOP;
 		goto error;
 	}
@@ -96,7 +96,7 @@ static void Wb35Tx(struct wbsoft_priv *adapter)
 	pWb35Tx->EP4vm_state = VM_RUNNING;
 	retv = usb_submit_urb(pUrb, GFP_ATOMIC);
 	if (retv < 0) {
-		printk("EP4 Tx Irp sending error\n");
+		netdev_err(pUrb->dev, "EP4 Tx Irp sending error\n");
 		goto cleanup;
 	}
 
@@ -218,7 +218,7 @@ static void Wb35Tx_EP2VM_complete(struct urb *pUrb)
 
 	/* The Urb is completed, check the result */
 	if (pWb35Tx->EP2VM_status != 0) {
-		printk("EP2 IoCompleteRoutine return error\n");
+		netdev_err(pUrb->dev, "EP2 IoCompleteRoutine return error\n");
 		pWb35Tx->EP2vm_state = VM_STOP;
 		goto error;
 	}
Signature · 1 line
1.8.1.2
#27 lore raw

Re: [PATCH v2 21/24] Staging: winbond: wb35tx: Replace printk with netdev_err

Quoted 1 line · Iker Pedrosa

The previously used printk lacked the warning level, now we've got a more accurate way to know the error.

[]

drivers/staging/winbond/wb35tx.c

Quoted 1 line
drivers/staging/winbond/wb35tx.c +0 -0

[]

drivers/staging/winbond/wb35tx.c static void Wb35Tx_complete(struct urb *pUrb) · line 35

Quoted 6 lines
drivers/staging/winbond/wb35tx.c +1 -1
@@ -32,7 +32,7 @@ static void Wb35Tx_complete(struct urb *pUrb)
 	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
 	struct wb35_mds *pMds = &adapter->Mds;
 
-	printk("wb35: tx complete\n");
+	netdev_err(pUrb->dev, "wb35: tx complete\n");

This one should either be removed or changed to netdev_dbg with the "wb35: " prefix removed.

#28 lore raw

PATCH v3 21/24 Staging: winbond: wb35tx: Replace printk with netdev

In reply to Iker Pedrosa

The previously used printk lacked the warning level, now we've got a more accurate way to know the error.

---
 drivers/staging/winbond/wb35tx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/winbond/wb35tx.c +4 -4
index 8c25cbd..02e77de 100644
@@ -32,7 +32,7 @@ static void Wb35Tx_complete(struct urb *pUrb)
 	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
 	struct wb35_mds *pMds = &adapter->Mds;
 
-	printk("wb35: tx complete\n");
+	netdev_dbg(pUrb->dev, "tx complete\n");
 	/* Variable setting */
 	pWb35Tx->EP4vm_state = VM_COMPLETED;
 	pWb35Tx->EP4VM_status = pUrb->status; /* Store the last result of Irp */
@@ -49,7 +49,7 @@ static void Wb35Tx_complete(struct urb *pUrb)
 
 	/* The URB is completed, check the result */
 	if (pWb35Tx->EP4VM_status != 0) {
-		printk("URB submission failed\n");
+		netdev_err(pUrb->dev, "URB submission failed\n");
 		pWb35Tx->EP4vm_state = VM_STOP;
 		goto error;
 	}
@@ -96,7 +96,7 @@ static void Wb35Tx(struct wbsoft_priv *adapter)
 	pWb35Tx->EP4vm_state = VM_RUNNING;
 	retv = usb_submit_urb(pUrb, GFP_ATOMIC);
 	if (retv < 0) {
-		printk("EP4 Tx Irp sending error\n");
+		netdev_err(pUrb->dev, "EP4 Tx Irp sending error\n");
 		goto cleanup;
 	}
 
@@ -218,7 +218,7 @@ static void Wb35Tx_EP2VM_complete(struct urb *pUrb)
 
 	/* The Urb is completed, check the result */
 	if (pWb35Tx->EP2VM_status != 0) {
-		printk("EP2 IoCompleteRoutine return error\n");
+		netdev_err(pUrb->dev, "EP2 IoCompleteRoutine return error\n");
 		pWb35Tx->EP2vm_state = VM_STOP;
 		goto error;
 	}
Signature · 1 line
1.8.1.2
Acked-by on v3 21/24
#29 lore raw

Re: [PATCH v3 21/24] Staging: winbond: wb35tx: Replace printk with netdev

Quoted 3 lines · Iker Pedrosa

The previously used printk lacked the warning level, now we've got a more accurate way to know the error.

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#30 lore raw

PATCH v2 22/24 Staging: winbond: wb35tx_s: erased the spaces after opening a '['

In reply to Iker Pedrosa

Erased the spaces that existed after opening some square brackets '['.

---
 drivers/staging/winbond/wb35tx_s.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/winbond/wb35tx_s.h +1 -1
index 715f87d..dc12008 100644
@@ -12,7 +12,7 @@
 /* Internal variable for module */
 struct wb35_tx {
 	/* For Tx buffer */
-	u8	TxBuffer[ MAX_USB_TX_BUFFER_NUMBER ][ MAX_USB_TX_BUFFER ];
+	u8	TxBuffer[MAX_USB_TX_BUFFER_NUMBER][MAX_USB_TX_BUFFER];
 
 	/* For Interrupt pipe */
 	u8	EP2_buf[MAX_INTERRUPT_LENGTH];
Signature · 1 line
1.8.1.2
#31 lore raw

PATCH v2 23/24 Staging: winbond: wbusb: fixed some lines over 80 characters

In reply to Iker Pedrosa

Fixed some lines over 80 characters.

---
 drivers/staging/winbond/wbusb.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/staging/winbond/wbusb.c +11 -5
index 3fa1ae4..a2868f2 100644
@@ -169,7 +169,8 @@ static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
 	Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
 }
 
-static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
+static void hal_set_current_channel_ex(struct hw_data *pHwData,
+				       struct chan_info channel)
 {
 	struct wb35_reg *reg = &pHwData->reg;
 
@@ -186,7 +187,8 @@ static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info
 				       sizeof(struct chan_info));
 }
 
-static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel)
+static void hal_set_current_channel(struct hw_data *pHwData,
+					    struct chan_info channel)
 {
 	hal_set_current_channel_ex(pHwData, channel);
 }
@@ -206,7 +208,9 @@ static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable)
 	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
 }
 
-/* For wep key error detection, we need to accept broadcast packets to be received temporary. */
+/* For wep key error detection, we need to accept broadcast packets to be
+ * received temporary.
+*/
 static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable)
 {
 	struct wb35_reg *reg = &pHwData->reg;
@@ -290,7 +294,8 @@ static const struct ieee80211_ops wbsoft_ops = {
 	.get_tsf		= wbsoft_get_tsf,
 };
 
-static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address)
+static void hal_set_ethernet_address(struct hw_data *pHwData,
+					     u8 *current_address)
 {
 	u32 ltmp[2];
 
@@ -305,7 +310,8 @@ static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_addres
 	Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT);
 }
 
-static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address)
+static void hal_get_permanent_address(struct hw_data *pHwData,
+					      u8 *pethernet_address)
 {
 	if (pHwData->SurpriseRemove)
 		return;
Signature · 1 line
1.8.1.2
#32 lore raw

PATCH v2 24/24 Staging: winbond: wbusb: changed sleep function from msleep to usleep

In reply to Iker Pedrosa

According to the documentation it is not recommended to use msleep for 1ms - 20ms because it may sleep longer than 20ms. So, it is recommended to use usleep instead.

---
 drivers/staging/winbond/wbusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/winbond/wbusb.c +1 -1
index a2868f2..f23bc1d 100644
@@ -717,7 +717,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
 
 	/* Waiting for HAL setting OK */
 	while (!hal_idle(pHwData))
-		msleep(10);
+		usleep(10000);
 
 	MTO_Init(priv);
 
Signature · 1 line
1.8.1.2