Allow 4 MB of video RAM for Cirrus graphics on traditional QEMU
PATCH 1/1 Allow 4 MB of video RAM for Cirrus graphics on traditional QEMU
Signed-off-by Rob Hoes <[email protected]>
--- docs/man/xl.cfg.pod.5 | 18 +++++++------- tools/libxl/libxl_create.c | 57 ++++++++++++++++++++++++++++++++++---------- 2 files changed, 55 insertions(+), 20 deletions(-)
docs/man/xl.cfg.pod.5 +10 -8
@@ -1009,14 +1009,16 @@ in the B<VFB_SPEC_STRING> for configuring virtual frame buffer devices Sets the amount of RAM which the emulated video card will contain, which in turn limits the resolutions and bit depths which will be available. -The default amount of video ram for stdvga is 8MB which is sufficient -for e.g. 1600x1200 at 32bpp and videoram option is currently working -only when using the qemu-xen-traditional device-model. - -When using the emulated Cirrus graphics card (B<vga="cirrus">) -the amount of video ram is fixed at 4MB which is sufficient -for 1024x768 at 32 bpp and videoram option is currently working -only when using the upstream qemu-xen device-model. + +When using the qemu-xen-traditional device-model, the default as well as +minimum amount of video RAM for stdvga is 8 MB, which is sufficient for e.g. +1600x1200 at 32bpp. For the upstream qemu-xen device-model, the default and +minimum is 16 MB. + +When using the emulated Cirrus graphics card (B<vga="cirrus">) and the +qemu-xen-traditional device-model, the amount of video RAM is fixed at 4 MB, +which is sufficient for 1024x768 at 32 bpp. For the upstream qemu-xen +device-model, the default and minimum is 8 MB. =item B<stdvga=BOOLEAN>
tools/libxl/libxl_create.c +45 -12
73 lines not on this page · raw message
Signature · 1 line
1.7.10.4
Il 18/09/2013 18:44, Rob Hoes ha scritto:
Quoted 106 lines
Signed-off-by Rob Hoes <[email protected]>--- docs/man/xl.cfg.pod.5 | 18 +++++++------- tools/libxl/libxl_create.c | 57 ++++++++++++++++++++++++++++++++++---------- 2 files changed, 55 insertions(+), 20 deletions(-)docs/man/xl.cfg.pod.5 +10
-8@@ -1009,14 +1009,16 @@ in the B<VFB_SPEC_STRING> for configuring virtual frame buffer devices Sets the amount of RAM which the emulated video card will contain, which in turn limits the resolutions and bit depths which will be available. -The default amount of video ram for stdvga is 8MB which is sufficient -for e.g. 1600x1200 at 32bpp and videoram option is currently working -only when using the qemu-xen-traditional device-model. - -When using the emulated Cirrus graphics card (B<vga="cirrus">) -the amount of video ram is fixed at 4MB which is sufficient -for 1024x768 at 32 bpp and videoram option is currently working -only when using the upstream qemu-xen device-model. + +When using the qemu-xen-traditional device-model, the default as well as +minimum amount of video RAM for stdvga is 8 MB, which is sufficient for e.g. +1600x1200 at 32bpp. For the upstream qemu-xen device-model, the default and +minimum is 16 MB. + +When using the emulated Cirrus graphics card (B<vga="cirrus">) and the +qemu-xen-traditional device-model, the amount of video RAM is fixed at 4 MB, +which is sufficient for 1024x768 at 32 bpp. For the upstream qemu-xen +device-model, the default and minimum is 8 MB. =item B<stdvga=BOOLEAN>tools/libxl/libxl_create.c +45
-10@@ -213,20 +213,55 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,if (b_info->shadow_memkb ==LIBXL_MEMKB_DEFAULT ) b_info->shadow_memkb =0 ; -if (b_info->u.hvm.vga.kind ==LIBXL_VGA_INTERFACE_TYPE_STD && - b_info->device_model_version == -LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN ) { +if (!b_info->u.hvm.vga.kind) + b_info->u.hvm.vga.kind =LIBXL_VGA_INTERFACE_TYPE_CIRRUS ; + +switch (b_info->device_model_version) { +case LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL : +switch (b_info->u.hvm.vga.kind) { +case LIBXL_VGA_INTERFACE_TYPE_STD : +if (b_info->video_memkb ==LIBXL_MEMKB_DEFAULT ) + b_info->video_memkb =8 *1024 ; +if (b_info->video_memkb < (8 *1024 ) ){ +LOG (ERROR ,"videoram must be at least 8 MB for STDVGA " +"on QEMU_XEN_TRADITIONAL" ); +return ERROR_INVAL ; + } +break ; +case LIBXL_VGA_INTERFACE_TYPE_CIRRUS : +default : +if (b_info->video_memkb ==LIBXL_MEMKB_DEFAULT ) + b_info->video_memkb =4 *1024 ; +if (b_info->video_memkb != (4 *1024 ) ){ +LOG (WARN ,"videoram other than 4 MB for CIRRUS on " +"QEMU_XEN_TRADITIONAL will be ignored" ); } +break ; + } +break ; +case LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN : +default : +switch (b_info->u.hvm.vga.kind) { +case LIBXL_VGA_INTERFACE_TYPE_STD :if (b_info->video_memkb ==LIBXL_MEMKB_DEFAULT ) b_info->video_memkb =16 *1024 ; -else if (b_info->video_memkb < (16 *1024 ) ){ -LOG (ERROR ,"videoram must be at least 16 mb with stdvga" ); +if (b_info->video_memkb < (16 *1024 ) ){ +LOG (ERROR ,"videoram must be at least 16 MB for STDVGA " +"on QEMU_XEN" ); +return ERROR_INVAL ; + } +break ; +case LIBXL_VGA_INTERFACE_TYPE_CIRRUS : +default : +if (b_info->video_memkb ==LIBXL_MEMKB_DEFAULT ) + b_info->video_memkb =8 *1024 ; +if (b_info->video_memkb < (8 *1024 ) ){ +LOG (ERROR ,"videoram must be at least 8 MB for CIRRUS " +"on QEMU_XEN" );return ERROR_INVAL ; } - }else if (b_info->video_memkb ==LIBXL_MEMKB_DEFAULT ) - b_info->video_memkb =8 *1024 ; -else if (b_info->video_memkb < (8 *1024 ) ){ -LOG (ERROR ,"videoram must be at least 8 mb" ); -return ERROR_INVAL ; +break ; + } +break ; }if (b_info->u.hvm.timer_mode ==LIBXL_TIMER_MODE_DEFAULT )
tools/libxl/libxl_create.c int libxl__domain_build_info_setdefault(libxl__gc *gc, · line 291
Quoted 8 lines
tools/libxl/libxl_create.c +0
-2@@ -251,8 +286,6 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,if (!b_info->u.hvm.boot)return ERROR_NOMEM ; } -if (!b_info->u.hvm.vga.kind) - b_info->u.hvm.vga.kind =LIBXL_VGA_INTERFACE_TYPE_CIRRUS ;libxl_defbool_setdefault (&b_info->u.hvm.vnc.enable, true);if (libxl_defbool_val (b_info->u.hvm.vnc.enable)) {libxl_defbool_setdefault (&b_info->u.hvm.vnc.findunused, true);
I not tested it for now but seems good, I cc'ed the maintainers.