Skip to contentSkip to conversation

arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

PATCH New Jens Scharsig (BuS Elektronik) 2 participants 2 messages Sep 19, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

From: "Jens Scharsig (BuS Elektronik)" <[email protected]>

Since UBIFS is enabled for cpux9k2, more malloc space is needed. For the current uboot 2013.10-rcX the size is to small, this will fix the startup problems by increasing the mallog space to 4MiB.

---
 include/configs/eb_cpux9k2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/eb_cpux9k2.h +1 -1
index ccc7bd0..b8e672f 100644
@@ -83,7 +83,7 @@
  * Size of malloc() pool
  */
 
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 520*1024)
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /*
  * sdram
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH v2 1/1 arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

Dear Esw at Bus-Elektronik.De,

Quoted 6 lines · Esw at Bus-Elektronik.De

From: "Jens Scharsig (BuS Elektronik)" <[email protected]>

Since UBIFS is enabled for cpux9k2, more malloc space is needed. For the current uboot 2013.10-rcX the size is to small, this will fix the startup problems by increasing the malloc space to 4MiB.

Quoted 6 lines

---
include/configs/eb_cpux9k2.h | 2 +-

1 file changed, 1 insertion(+), 1 deletion(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann