bluetooth: btusb: Added support for Belkin F8065bf usb bluetooth device
PATCH 1/1 bluetooth: btusb: Added support for Belkin F8065bf usb bluetooth device
Belkin bluetooth device's usb device id added to generic usb bluetooth driver.
--- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/bluetooth/btusb.c +3 -0
@@ -111,6 +111,9 @@ static struct usb_device_id btusb_table[] = {/*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + +/* Belkin F8T065bf */ + { USB_DEVICE(0x050d, 0x065a) }, { } /* Terminating entry */ };
Signature · 1 line
1.8.1.4
Hi Ken,
2013-09-19 Ken O'Brien <[email protected]>:
Quoted 12 lines
Belkin bluetooth device's usb device id added to generic usb bluetooth driver.
Signed-off-by Ken O'Brien <[email protected]>--- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static struct usb_device_id btusb_table[] = { · line 116
Quoted 6 lines
drivers/bluetooth/btusb.c +3
-0@@ -111,6 +111,9 @@ static struct usb_device_id btusb_table[] = {/*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + +/* Belkin F8T065bf */ + { USB_DEVICE(0x050d, 0x065a) },
Could you please add the output of /sys/kernel/debug/usb/devices for this bluetooth controller to the commit messages, like we do for any new device id we add to btusb. Thanks.
Gustavo
Sure thing. Here's the output:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Quoted 33 lines · Gustavo Padovan
Hi Ken,
2013-09-19 Ken O'Brien <[email protected]>:
Quoted 12 lines
Belkin bluetooth device's usb device id added to generic usb bluetooth driver.
Signed-off-by Ken O'Brien <[email protected]>--- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)drivers/bluetooth/btusb.c +0
-0drivers/bluetooth/btusb.c static struct usb_device_id btusb_table[] = { · line 116
Quoted 6 lines
drivers/bluetooth/btusb.c +3
-0@@ -111,6 +111,9 @@ static struct usb_device_id btusb_table[] = {/*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + +/* Belkin F8T065bf */ + { USB_DEVICE(0x050d, 0x065a) },Could you please add the output of
/sys/kernel/debug/usb/devicesfor this bluetooth controller to the commit messages, like we do for any new device id we add to btusb. Thanks.Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Here is the output:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Quoted 33 lines · Gustavo Padovan
Hi Ken,
2013-09-19 Ken O'Brien <[email protected]>:
Quoted 12 lines
Belkin bluetooth device's usb device id added to generic usb bluetooth driver.
Signed-off-by Ken O'Brien <[email protected]>--- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)drivers/bluetooth/btusb.c +0
-0drivers/bluetooth/btusb.c static struct usb_device_id btusb_table[] = { · line 116
Quoted 6 lines
drivers/bluetooth/btusb.c +3
-0@@ -111,6 +111,9 @@ static struct usb_device_id btusb_table[] = {/*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + +/* Belkin F8T065bf */ + { USB_DEVICE(0x050d, 0x065a) },Could you please add the output of
/sys/kernel/debug/usb/devicesfor this bluetooth controller to the commit messages, like we do for any new device id we add to btusb. Thanks.Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Apologies. This was supposed to be in the commit log. I'll resubmit the patch and I notice it's another instance of an existing bcm device. I'll update the patch accordingly.
Ken
----- Original Message -----
From: "Ken O'Brien"
To:"Gustavo Padovan"
Cc:, , ,
Sent:Thu, 19 Sep 2013 23:07:37 +0100
Subject:Re: [PATCH] bluetooth: btusb: Added support for Belkin F8065bf usb bluetooth device
Here is the output:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=050d ProdID=065a Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=0002723E2D29
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Quoted 5 lines · Gustavo Padovan
Hi Ken,
2013-09-19 Ken O'Brien :
Quoted 1 line
Belkin bluetooth device's usb device id added to generic usb
bluetooth driver.
Quoted 7 lines
Review
Quoted 7 lines
Signed-off-by Ken O'Brien---
drivers/bluetooth/btusb.c| 3 +++1 file changed, 3 insertions(+)(quoted diff) +0
-0
b/drivers/bluetooth/btusb.c
Quoted 5 lines
Quoted 5 lines
index 8e16f0a..117b90c 100644
drivers/bluetooth/btusb.c +0
-0@@ -111,6 +111,9 @@ static struct usb_device_id btusb_table[] = {
Quoted 7 lines
drivers/bluetooth/btusb.c static struct usb_device_id btusb_table[] = { · line 116
Quoted 5 lines
drivers/bluetooth/btusb.c +3
-0/*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + +/* Belkin F8T065bf */ + { USB_DEVICE(0x050d, 0x065a) },Could you please add the output of
/sys/kernel/debug/usb/devices
for this
Quoted 1 line
bluetooth controller to the commit messages, like we do for any new
device id
Quoted 5 lines
we add to btusb. Thanks.
Gustavo
--
To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
Quoted 3 lines
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/