ARM: mxs: Add PPC-AG BG0900 board
PATCH 1/1 ARM: mxs: Add PPC-AG BG0900 board
This board supports FEC Ethernet, SPI NOR and NAND flash.
Signed-off-by Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Christoph Baumann <[email protected]>
--- board/ppcag/bg0900/Makefile | 31 ++++++++++ board/ppcag/bg0900/bg0900.c | 86 ++++++++++++++++++++++++++ board/ppcag/bg0900/spl_boot.c | 140 ++++++++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/bg0900.h | 97 +++++++++++++++++++++++++++++ 5 files changed, 355 insertions(+) create mode 100644 board/ppcag/bg0900/Makefile create mode 100644 board/ppcag/bg0900/bg0900.c create mode 100644 board/ppcag/bg0900/spl_boot.c create mode 100644 include/configs/bg0900.h
board/ppcag/bg0900/Makefile new file +31 -0
@@ -0,0 +1,31 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifndef CONFIG_SPL_BUILD +COBJS := bg0900.o +else +COBJS := spl_boot.o +endif + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/ppcag/bg0900/bg0900.c new file +86 -0
86 lines not on this page · raw message
board/ppcag/bg0900/spl_boot.c new file +140 -0
140 lines not on this page · raw message
boards.cfg +1 -0
@@ -207,6 +207,7 @@ Active arm arm926ejs mxs freescale mx28evk Active arm arm926ejs mxs freescale mx28evk mx28evk_auart_console mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC Fabio Estevam <[email protected]> Active arm arm926ejs mxs freescale mx28evk mx28evk_nand mx28evk:ENV_IS_IN_NAND Fabio Estevam <[email protected]> Active arm arm926ejs mxs olimex mx23_olinuxino mx23_olinuxino mx23_olinuxino Marek Vasut <[email protected]> +Active arm arm926ejs mxs ppcag bg0900 bg0900 bg0900 Marek Vasut <[email protected]> Active arm arm926ejs mxs sandisk sansa_fuze_plus sansa_fuze_plus - Marek Vasut <[email protected]> Active arm arm926ejs mxs schulercontrol sc_sps_1 sc_sps_1 - Marek Vasut <[email protected]> Active arm arm926ejs nomadik st nhk8815 nhk8815 - Nomadik Linux Team <[email protected]>:Alessandro Rubini <[email protected]>
include/configs/bg0900.h new file +97 -0
97 lines not on this page · raw message
Signature · 1 line
1.8.4.rc3
PATCH 1/1 ARM: mxs: Add PPC-AG BG0900 board
Quoted 6 lines · Marek Vasut
This board supports FEC Ethernet, SPI NOR and NAND flash.
Signed-off-by Marek Vasut <[email protected]>Cc Stefano Babic <[email protected]>Cc Christoph Baumann <[email protected]>---
Applied to u-boot-imx, -next branch, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================