Skip to contentSkip to conversation

ARM: dts: omap3-beagle-xm: enable pullup for dvi on twl_gpio

PATCH New robertcnelson 1 participant 1 message Sep 20, 2013 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: omap3-beagle-xm: enable pullup for dvi on twl_gpio

From: Robert Nelson <[email protected]>

This fixes some video sync issues seen with KVM equipment on bootup, with omapdrm/kms by making sure the TFP410 is powered up, via pulling up GPIO2 on the twl4030.

https://groups.google.com/d/msg/beagleboard/Wk9SLuw-EvY/oCxJcAHufAMJ

---
 arch/arm/boot/dts/omap3-beagle-xm.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/omap3-beagle-xm.dts +4 -4
index 0c514dc..c48778f 100644
@@ -131,14 +131,14 @@
 
 &twl_gpio {
 	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
+	/* pullups: BIT(1), BIT(2) */
+	ti,pullups = <0x000006>;
 	/*
 	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(6), BIT(7), BIT(8), BIT(13)
 	 * BIT(15), BIT(16), BIT(17)
 	 */
-	ti,pulldowns = <0x03a1c4>;
+	ti,pulldowns = <0x03a1c0>;
 };
 
 &usb_otg_hs {
Signature · 1 line
1.8.4.rc3