Skip to contentSkip to conversation

ALSA : hda - not use assigned converters for all unused pins

PATCH Applied [email protected] 3 participants 3 messages Sep 22, 2013 – Sep 26, 2013 Sound

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ALSA : hda - not use assigned converters for all unused pins

From: Mengdong Lin <[email protected]>

BIOS can mark a pin as "no physical connection" if the port is used by an integrated display which is not audio capable. And audio driver will overlook such pins.

On Haswell, such a disconneted pin will keep muted and connected to the 1st converter by default. But if the 1st convertor is assigned to a connected pin for audio streaming. The muted disconnected pin can make the connected pin no sound output.

So this patch avoids using assigned converters for all unused pins for Haswell, including the disconected pins.

sound/pci/hda/patch_hdmi.c +29 -18
index 3d8cd044..7ea0245 100644
@@ -1149,32 +1149,43 @@ static int hdmi_choose_cvt(struct hda_codec *codec,
 }
 
 static void haswell_config_cvts(struct hda_codec *codec,
-			int pin_id, int mux_id)
+			hda_nid_t pin_nid, int mux_idx)
 {
 	struct hdmi_spec *spec = codec->spec;
-	struct hdmi_spec_per_pin *per_pin;
-	int pin_idx, mux_idx;
-	int curr;
-	int err;
+	hda_nid_t nid, end_nid;
+	int cvt_idx, curr;
+	struct hdmi_spec_per_cvt *per_cvt;
 
-	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
-		per_pin = get_pin(spec, pin_idx);
+	/* configure all pins, including "no physical connection" ones */
+	end_nid = codec->start_nid + codec->num_nodes;
+	for (nid = codec->start_nid; nid < end_nid; nid++) {
+		unsigned int wid_caps = get_wcaps(codec, nid);
+		unsigned int wid_type = get_wcaps_type(wid_caps);
 
-		if (pin_idx == pin_id)
+		if (wid_type != AC_WID_PIN)
 			continue;
 
-		curr = snd_hda_codec_read(codec, per_pin->pin_nid, 0,
+		if (nid == pin_nid)
+			continue;
+
+		curr = snd_hda_codec_read(codec, nid, 0,
 					  AC_VERB_GET_CONNECT_SEL, 0);
+		if (curr != mux_idx)
+			continue;
 
-		/* Choose another unused converter */
-		if (curr == mux_id) {
-			err = hdmi_choose_cvt(codec, pin_idx, NULL, &mux_idx);
-			if (err < 0)
-				return;
-			snd_printdd("HDMI: choose converter %d for pin %d\n", mux_idx, pin_idx);
-			snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
+		/* choose an unassigned converter. The conveters in the
+		 * connection list are in the same order as in the codec.
+		 */
+		for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
+			per_cvt = get_cvt(spec, cvt_idx);
+			if (!per_cvt->assigned) {
+				snd_printdd("choose cvt %d for pin nid %d\n",
+					cvt_idx, nid);
+				snd_hda_codec_write_cache(codec, nid, 0,
 					    AC_VERB_SET_CONNECT_SEL,
-					    mux_idx);
+					    cvt_idx);
+				break;
+			}
 		}
 	}
 }
@@ -1216,7 +1227,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 
 	/* configure unused pins to choose other converters */
 	if (is_haswell(codec))
-		haswell_config_cvts(codec, pin_idx, mux_idx);
+		haswell_config_cvts(codec, per_pin->pin_nid, mux_idx);
 
 	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
 
Signature · 1 line
1.8.1.2
Reviewed-by on v2 1/1
#1 lore raw
Quoted 11 lines · On 09/22/2013 02:34 AM, [email protected] wrote:

From: Mengdong Lin <[email protected]>

BIOS can mark a pin as "no physical connection" if the port is used by an integrated display which is not audio capable. And audio driver will overlook such pins.

On Haswell, such a disconneted pin will keep muted and connected to the 1st converter by default. But if the 1st convertor is assigned to a connected pin for audio streaming. The muted disconnected pin can make the connected pin no sound output.

Quoted 4 lines

So this patch avoids using assigned converters for all unused pins for Haswell, including the disconected pins.

For the record, we have tested the previous version of this patch and confirmed it was working, and the changes here look good, so I'm all for applying it.

Quoted 76 lines
sound/pci/hda/patch_hdmi.c +29 -18
index 3d8cd044..7ea0245 100644
@@ -1149,32 +1149,43 @@ static int hdmi_choose_cvt(struct hda_codec *codec,
 }
 
 static void haswell_config_cvts(struct hda_codec *codec,
-			int pin_id, int mux_id)
+			hda_nid_t pin_nid, int mux_idx)
 {
 	struct hdmi_spec *spec = codec->spec;
-	struct hdmi_spec_per_pin *per_pin;
-	int pin_idx, mux_idx;
-	int curr;
-	int err;
+	hda_nid_t nid, end_nid;
+	int cvt_idx, curr;
+	struct hdmi_spec_per_cvt *per_cvt;
 
-	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
-		per_pin = get_pin(spec, pin_idx);
+	/* configure all pins, including "no physical connection" ones */
+	end_nid = codec->start_nid + codec->num_nodes;
+	for (nid = codec->start_nid; nid < end_nid; nid++) {
+		unsigned int wid_caps = get_wcaps(codec, nid);
+		unsigned int wid_type = get_wcaps_type(wid_caps);
 
-		if (pin_idx == pin_id)
+		if (wid_type != AC_WID_PIN)
 			continue;
 
-		curr = snd_hda_codec_read(codec, per_pin->pin_nid, 0,
+		if (nid == pin_nid)
+			continue;
+
+		curr = snd_hda_codec_read(codec, nid, 0,
 					  AC_VERB_GET_CONNECT_SEL, 0);
+		if (curr != mux_idx)
+			continue;
 
-		/* Choose another unused converter */
-		if (curr == mux_id) {
-			err = hdmi_choose_cvt(codec, pin_idx, NULL, &mux_idx);
-			if (err < 0)
-				return;
-			snd_printdd("HDMI: choose converter %d for pin %d\n", mux_idx, pin_idx);
-			snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
+		/* choose an unassigned converter. The conveters in the
+		 * connection list are in the same order as in the codec.
+		 */
+		for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
+			per_cvt = get_cvt(spec, cvt_idx);
+			if (!per_cvt->assigned) {
+				snd_printdd("choose cvt %d for pin nid %d\n",
+					cvt_idx, nid);
+				snd_hda_codec_write_cache(codec, nid, 0,
 					    AC_VERB_SET_CONNECT_SEL,
-					    mux_idx);
+					    cvt_idx);
+				break;
+			}
 		}
 	}
 }
@@ -1216,7 +1227,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 
 	/* configure unused pins to choose other converters */
 	if (is_haswell(codec))
-		haswell_config_cvts(codec, pin_idx, mux_idx);
+		haswell_config_cvts(codec, per_pin->pin_nid, mux_idx);
 
 	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
 
Signature · 2 lines
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
Applied
#2 lore raw
In reply to [email protected]

At Sat, 21 Sep 2013 20:34:45 -0400,

Quoted 12 lines · [email protected] wrote:

From: Mengdong Lin <[email protected]>

BIOS can mark a pin as "no physical connection" if the port is used by an integrated display which is not audio capable. And audio driver will overlook such pins.

On Haswell, such a disconneted pin will keep muted and connected to the 1st converter by default. But if the 1st convertor is assigned to a connected pin for audio streaming. The muted disconnected pin can make the connected pin no sound output.

Quoted 4 lines

So this patch avoids using assigned converters for all unused pins for Haswell, including the disconected pins.

Thanks, applied with David's review tag.

Takashi

Quoted 78 lines
sound/pci/hda/patch_hdmi.c +29 -18
index 3d8cd044..7ea0245 100644
@@ -1149,32 +1149,43 @@ static int hdmi_choose_cvt(struct hda_codec *codec,
 }
 
 static void haswell_config_cvts(struct hda_codec *codec,
-			int pin_id, int mux_id)
+			hda_nid_t pin_nid, int mux_idx)
 {
 	struct hdmi_spec *spec = codec->spec;
-	struct hdmi_spec_per_pin *per_pin;
-	int pin_idx, mux_idx;
-	int curr;
-	int err;
+	hda_nid_t nid, end_nid;
+	int cvt_idx, curr;
+	struct hdmi_spec_per_cvt *per_cvt;
 
-	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
-		per_pin = get_pin(spec, pin_idx);
+	/* configure all pins, including "no physical connection" ones */
+	end_nid = codec->start_nid + codec->num_nodes;
+	for (nid = codec->start_nid; nid < end_nid; nid++) {
+		unsigned int wid_caps = get_wcaps(codec, nid);
+		unsigned int wid_type = get_wcaps_type(wid_caps);
 
-		if (pin_idx == pin_id)
+		if (wid_type != AC_WID_PIN)
 			continue;
 
-		curr = snd_hda_codec_read(codec, per_pin->pin_nid, 0,
+		if (nid == pin_nid)
+			continue;
+
+		curr = snd_hda_codec_read(codec, nid, 0,
 					  AC_VERB_GET_CONNECT_SEL, 0);
+		if (curr != mux_idx)
+			continue;
 
-		/* Choose another unused converter */
-		if (curr == mux_id) {
-			err = hdmi_choose_cvt(codec, pin_idx, NULL, &mux_idx);
-			if (err < 0)
-				return;
-			snd_printdd("HDMI: choose converter %d for pin %d\n", mux_idx, pin_idx);
-			snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
+		/* choose an unassigned converter. The conveters in the
+		 * connection list are in the same order as in the codec.
+		 */
+		for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
+			per_cvt = get_cvt(spec, cvt_idx);
+			if (!per_cvt->assigned) {
+				snd_printdd("choose cvt %d for pin nid %d\n",
+					cvt_idx, nid);
+				snd_hda_codec_write_cache(codec, nid, 0,
 					    AC_VERB_SET_CONNECT_SEL,
-					    mux_idx);
+					    cvt_idx);
+				break;
+			}
 		}
 	}
 }
@@ -1216,7 +1227,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 
 	/* configure unused pins to choose other converters */
 	if (is_haswell(codec))
-		haswell_config_cvts(codec, pin_idx, mux_idx);
+		haswell_config_cvts(codec, per_pin->pin_nid, mux_idx);
 
 	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
 
Signature · 1 line
1.8.1.2