mkefidisk.sh: Allow using a loopback mounted file
PATCH v2 1/1 mkefidisk.sh: Allow using a loopback mounted file
It should be possible to generate a disk to a file using a loopback device with mkefidisk.sh, which is useful for booting simulators. To make this possible the partitions for the loop back need to work similarly to the mmc devices. The mkfs.vfat also requires and additional argument to force it to write to something other then a real disk.
Example:
qemu-img create -f raw bigdisk 4G
dev=sudo losetup -f
sudo losetup $dev bigdisk
mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda sudo losetup -d $dev
Note:
Also a bug was fixed in the mkefidisk.sh where if the disk you are writing to initially has an invalid label the size of the first partition will be computed incorrectly. For the simulator disk creation this is generally always the case, but this can happen with real hardware as well.
--- scripts/contrib/mkefidisk.sh | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
scripts/contrib/mkefidisk.sh +12 -2
@@ -134,6 +134,11 @@ fi # Partition $DEVICE # DEVICE_SIZE=$(parted $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//") +# If the device size is not reported there may not be a valid label +if [ "$DEVICE_SIZE" = "" ] ; then + parted $DEVICE mklabel msdos + DEVICE_SIZE=$(parted $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//") +fi SWAP_SIZE=$((DEVICE_SIZE*SWAP_RATIO/100)) ROOTFS_SIZE=$((DEVICE_SIZE-BOOT_SIZE-SWAP_SIZE)) ROOTFS_START=$((BOOT_SIZE))
@@ -142,7 +147,7 @@ SWAP_START=$((ROOTFS_END)) # MMC devices use a partition prefix character 'p' PART_PREFIX="" -if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ]; then +if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then PART_PREFIX="p" fi BOOTFS=$DEVICE${PART_PREFIX}1
@@ -197,7 +202,12 @@ unmount_device # echo "" echo "Formatting $BOOTFS as vfat..." -mkfs.vfat $BOOTFS -n "efi" +if [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then + mkfs.vfat -I $BOOTFS -n "efi" +else + mkfs.vfat $BOOTFS -n "efi" + +fi echo "Formatting $ROOTFS as ext3..." mkfs.ext3 $ROOTFS -L "root"
Signature · 1 line
1.7.9.5