imx_watchdog: do not soft-reset while watchdog init
Subsystems (2)
PATCH 1/1 imx_watchdog: do not soft-reset while watchdog init
Currently the driver clears WCR_SRS bit when enabling the watchdog and this causes a software reset. Do not clear WCR_SRS.
Signed-off-by Anatolij Gustschin <[email protected]>
--- drivers/watchdog/imx_watchdog.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/watchdog/imx_watchdog.c +2 -1
@@ -19,6 +19,7 @@ struct watchdog_regs {#define WCR_WDBG 0x02#define WCR_WDE 0x04/* WDOG enable */ #define WCR_WDT 0x08 +#define WCR_SRS 0x10#define WCR_WDW 0x80#define SET_WCR_WT (x) (x << 8)
@@ -45,7 +46,7 @@ void hw_watchdog_init(void)#define CONFIG_WATCHDOG_TIMEOUT_MSECS 128000#endif timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS /500 ) -1 ; -writew (WCR_WDZST |WCR_WDBG |WCR_WDE |WCR_WDT | +writew (WCR_WDZST |WCR_WDBG |WCR_WDE |WCR_WDT |WCR_SRS |WCR_WDW |SET_WCR_WT (timeout), &wdog->wcr);hw_watchdog_reset (); }
Signature · 1 line
1.7.9.5
PATCH 1/1 imx_watchdog: do not soft-reset while watchdog init
Quoted 6 lines · Anatolij Gustschin
Currently the driver clears
WCR_SRSbit when enabling the watchdog and this causes a software reset. Do not clearWCR_SRS.Signed-off-by Anatolij Gustschin <[email protected]>---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================