Skip to contentSkip to conversation

ARM: mach-imx: clk-imx51-imx53: Retrieve base address and irq from dt

PATCH New Fabio Estevam 2 participants 4 messages Oct 1, 2013 – Oct 5, 2013

Subsystems (3)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/3 ARM: mach-imx: clk-imx51-imx53: Retrieve base address and irq from dt

From: Fabio Estevam <[email protected]>

As mx53 is a dt-only SoC, we should retrieve the gpt base address and irq from the device tree, instead of using the old MX53_IO_ADDRESS method.

---
 arch/arm/mach-imx/clk-imx51-imx53.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
arch/arm/mach-imx/clk-imx51-imx53.c +11 -4
index 7c0dc45..03ca2e3 100644
@@ -13,6 +13,9 @@
 #include <linux/clkdev.h>
 #include <linux/of.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include "crm-regs-imx5.h"
 #include "clk.h"
@@ -468,9 +471,10 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			unsigned long rate_ckih1, unsigned long rate_ckih2)
 {
-	int i;
+	int i, irq;
 	unsigned long r;
 	struct device_node *np;
+	void __iomem *base;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -557,9 +561,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
 	clk_set_rate(clk[esdhc_b_podf], 200000000);
 
-	/* System timer */
-	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
-
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable_unprepare(clk[iim_gate]);
@@ -567,6 +568,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
 	clk_set_rate(clk[usboh3_per_gate], r);
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(base, irq);
+
 	return 0;
 }
 
Signature · 1 line
1.8.1.2
author reviewer
#1 lore raw

PATCH 2/3 ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt

From: Fabio Estevam <[email protected]>

As mx53 is a dt-only SoC, we should retrieve the tzic base address from the device tree, instead of using the old MX53_IO_ADDRESS method.

---
 arch/arm/mach-imx/mm-imx5.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
arch/arm/mach-imx/mm-imx5.c +9 -1
index eb3cce3..2cafcf0 100644
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/of_address.h>
 
 #include <asm/mach/map.h>
 
@@ -100,7 +101,14 @@ void __init mx51_init_irq(void)
 
 void __init mx53_init_irq(void)
 {
-	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
+	struct device_node *np;
+	void __iomem *base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	tzic_init_irq(base);
 }
 
 static struct sdma_platform_data imx51_sdma_pdata __initdata = {
Signature · 1 line
1.8.1.2
author reviewer
#2 lore raw

PATCH 3/3 ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt

In reply to Fabio Estevam

From: Fabio Estevam <[email protected]>

As mx53 is a dt-only SoC, we should retrieve the iomuxc base address from the device tree, instead of using the old MX53_IO_ADDRESS method.

---
 arch/arm/mach-imx/mm-imx5.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-imx/mm-imx5.c +8 -1
index 2cafcf0..d1d5260 100644
@@ -89,8 +89,15 @@ void __init imx51_init_early(void)
 
 void __init imx53_init_early(void)
 {
+	struct device_node *np;
+	void __iomem *base;
+
 	mxc_set_cpu_type(MXC_CPU_MX53);
-	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	mxc_iomux_v3_init(base);
 	imx_src_init();
 }
 
Signature · 1 line
1.8.1.2