Skip to contentSkip to conversation

vgacon: prevent vgacon from reloading

PATCH In review David Herrmann 1 participant 2 messages Oct 2, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 vgacon: prevent vgacon from reloading

If vgacon got unloaded for any reason, we can never be sure that vga registers are still accessible. fbdev/DRM/xycon might reconfigure graphics devices in a way that prevents vgacon from working again. Therefore, inhibit rebinding vgacon.

Note that this _might_ break use-cases where users unbind vgacon and then rebind it without breaking VGA mode. However, this seems to be rarely useful and given that several GPUs cannot even restore VGA mode it seems safer to prevent it entirely.

This also adds a dependency to dummy_con as the VT layer does not allow failure during console-rebinding. Hence, we need a guarantee that dummy_con is available.
To avoid recursive Kconfig dependencies, we move the vga-con/sgi-con conflict directly into VGA_CONSOLE and make DUMMY_CONSOLE always active.

---
 drivers/video/console/Kconfig  |  2 +-
 drivers/video/console/vgacon.c | 10 ++++++----
 2 files changed, 7 insertions(+), 5 deletions(-)
drivers/video/console/Kconfig +1 -1
index 846caab..173f1e7 100644
@@ -8,6 +8,7 @@ config VGA_CONSOLE
 	bool "VGA text console" if EXPERT || !X86
 	depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && \
 		!SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \
+		SGI_NEWPORT_CONSOLE!=y && DUMMY_CONSOLE && \
 		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
 	default y
 	help
@@ -71,7 +72,6 @@ config SGI_NEWPORT_CONSOLE
 
 config DUMMY_CONSOLE
 	bool
-	depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
 	default y
 
 config DUMMY_CONSOLE_COLUMNS
drivers/video/console/vgacon.c +6 -4
index 9d8feac..d598af6 100644
@@ -368,6 +368,7 @@ static int vgacon_scrolldelta(struct vc_data *c, int lines)
 
 static const char *vgacon_startup(void)
 {
+	static bool vgacon_inhibit;
 	const char *display_desc = NULL;
 	u16 saved1, saved2;
 	volatile u16 *p;
@@ -375,14 +376,15 @@ static const char *vgacon_startup(void)
 	if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB ||
 	    screen_info.orig_video_isVGA == VIDEO_TYPE_EFI) {
 	      no_vga:
-#ifdef CONFIG_DUMMY_CONSOLE
 		conswitchp = &dummy_con;
 		return conswitchp->con_startup();
-#else
-		return NULL;
-#endif
 	}
 
+	/* fbdev/DRM can disable VGA-mode so prevent reloading */
+	if (vgacon_inhibit)
+		goto no_vga;
+	vgacon_inhibit = true;
+
 	/* boot_params.screen_info initialized? */
 	if ((screen_info.orig_video_mode  == 0) &&
 	    (screen_info.orig_video_lines == 0) &&
Signature · 1 line
1.8.4
#1 lore raw

Hi

Quoted 55 lines · David Herrmann

If vgacon got unloaded for any reason, we can never be sure that vga registers are still accessible. fbdev/DRM/xycon might reconfigure graphics devices in a way that prevents vgacon from working again. Therefore, inhibit rebinding vgacon.

Note that this _might_ break use-cases where users unbind vgacon and then rebind it without breaking VGA mode. However, this seems to be rarely useful and given that several GPUs cannot even restore VGA mode it seems safer to prevent it entirely.

This also adds a dependency to dummy_con as the VT layer does not allow failure during console-rebinding. Hence, we need a guarantee that dummy_con is available.
To avoid recursive Kconfig dependencies, we move the vga-con/sgi-con conflict directly into VGA_CONSOLE and make DUMMY_CONSOLE always active.

---
 drivers/video/console/Kconfig  |  2 +-
 drivers/video/console/vgacon.c | 10 ++++++----
 2 files changed, 7 insertions(+), 5 deletions(-)
drivers/video/console/Kconfig +1 -1
index 846caab..173f1e7 100644
@@ -8,6 +8,7 @@ config VGA_CONSOLE
        bool "VGA text console" if EXPERT || !X86
        depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && \
                !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \
+               SGI_NEWPORT_CONSOLE!=y && DUMMY_CONSOLE && \
                (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
        default y
        help
@@ -71,7 +72,6 @@ config SGI_NEWPORT_CONSOLE
 
 config DUMMY_CONSOLE
        bool
-       depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
        default y
 
 config DUMMY_CONSOLE_COLUMNS
drivers/video/console/vgacon.c +1 -0
index 9d8feac..d598af6 100644
@@ -368,6 +368,7 @@ static int vgacon_scrolldelta(struct vc_data *c, int lines)
 
 static const char *vgacon_startup(void)
 {
+       static bool vgacon_inhibit;
        const char *display_desc = NULL;
        u16 saved1, saved2;
        volatile u16 *p;

drivers/video/console/vgacon.c static const char *vgacon_startup(void) · line 379

Quoted 5 lines
drivers/video/console/vgacon.c +0 -1
@@ -375,14 +376,15 @@ static const char *vgacon_startup(void)
        if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB ||
            screen_info.orig_video_isVGA == VIDEO_TYPE_EFI) {
              no_vga:
-#ifdef CONFIG_DUMMY_CONSOLE
                conswitchp = &dummy_con;

Ok this one doesn't really work on reloading but only on con_init().. We might have to manually register dummy_con first. Ugh, man, I don't see the point of fixing that, let's just drop vgacon and use efifb/vesafb.

David

Quoted 17 lines
drivers/video/console/vgacon.c +5 -4
                return conswitchp->con_startup();
-#else
-               return NULL;
-#endif
        }
 
+       /* fbdev/DRM can disable VGA-mode so prevent reloading */
+       if (vgacon_inhibit)
+               goto no_vga;
+       vgacon_inhibit = true;
+
        /* boot_params.screen_info initialized? */
        if ((screen_info.orig_video_mode  == 0) &&
            (screen_info.orig_video_lines == 0) &&
--

1.8.4