Basic scheduler support for automatic NUMA balancing V9
Subsystems (15)
Mel Gorman
reviewerPATCH 43/63 sched: numa: Use {cpu, pid} to create task groups for shared faults
In reply to Mel GormanFrom: Peter Zijlstra <[email protected]>
While parallel applications tend to align their data on the cache boundary, they tend not to align on the page or THP boundary. Consequently tasks that partition their data can still "false-share" pages presenting a problem for optimal NUMA placement.
This patch uses NUMA hinting faults to chain tasks together into numa_groups. As well as storing the NID a task was running on when accessing a page a truncated representation of the faulting PID is stored. If subsequent faults are from different PIDs it is reasonable to assume that those two tasks share a page and are candidates for being grouped together. Note that this patch makes no scheduling decisions based on the grouping information.
--- include/linux/mm.h | 11 ++++ include/linux/sched.h | 3 + kernel/sched/core.c | 3 + kernel/sched/fair.c | 165 +++++++++++++++++++++++++++++++++++++++++++++++--- kernel/sched/sched.h | 5 +- mm/memory.c | 8 +++ 6 files changed, 182 insertions(+), 13 deletions(-)
include/linux/mm.h +11 -0
@@ -691,6 +691,12 @@ static inline bool cpupid_cpu_unset(int cpupid)return cpupid_to_cpu (cpupid) == (-1 &LAST__CPU_MASK ); } +static inline bool __cpupid_match_pid (pid_t task_pid,int cpupid) +{ +return (task_pid &LAST__PID_MASK ) ==cpupid_to_pid (cpupid); +} + +#define cpupid_match_pid (task, cpupid) __cpupid_match_pid(task->pid, cpupid)#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS static inline int page_cpupid_xchg_last (struct page *page,int cpupid) {
@@ -760,6 +766,11 @@ static inline bool cpupid_pid_unset(int cpupid)static inline void page_cpupid_reset_last (struct page *page) { } + +static inline bool cpupid_match_pid (struct task_struct *task,int cpupid) +{ +return false; +}#endif /* CONFIG_NUMA_BALANCING */ static inline struct zone *page_zone (const struct page *page)
include/linux/sched.h +3 -0
@@ -1337,6 +1337,9 @@ struct task_struct {u64 node_stamp;/* migration stamp */ struct callback_head numa_work; +struct list_head numa_entry; +struct numa_group *numa_group; +/* * Exponential decaying average of faults on a per-node basis. * Scheduling placement decisions are made based on the these counts.
kernel/sched/core.c +3 -0
@@ -1728,6 +1728,9 @@ static void __sched_fork(struct task_struct *p) p->numa_work.next = &p->numa_work; p->numa_faults =NULL ; p->numa_faults_buffer =NULL ; + +INIT_LIST_HEAD (&p->numa_entry); + p->numa_group =NULL ;#endif /* CONFIG_NUMA_BALANCING */ cpu_hotplug_init_task (p);
kernel/sched/fair.c +156 -9
202 lines not on this page · raw message
kernel/sched/sched.h +1 -4
@@ -556,10 +556,7 @@ static inline u64 rq_clock_task(struct rq *rq)#ifdef CONFIG_NUMA_BALANCING extern int migrate_task_to (struct task_struct *p,int cpu);extern int migrate_swap (struct task_struct *,struct task_struct *); -static inline void task_numa_free (struct task_struct *p) -{ -kfree (p->numa_faults); -} +extern void task_numa_free (struct task_struct *p);#else /* CONFIG_NUMA_BALANCING */ static inline void task_numa_free (struct task_struct *p) {
mm/memory.c +8 -0
@@ -2719,6 +2719,14 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,get_page (dirty_page); reuse: +/* +* Clear the pages cpupid information as the existing +* information potentially belongs to a now completely +* unrelated process. +*/ +if (old_page) +page_cpupid_xchg_last (old_page, (1 <<LAST_CPUPID_SHIFT ) -1 ); +flush_cache_page (vma, address,pte_pfn (orig_pte)); entry =pte_mkyoung (orig_pte); entry =maybe_mkwrite (pte_mkdirty (entry), vma);
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 43/63] sched: numa: Use {cpu, pid} to create task groups for shared faults
Quoted 15 lines · Mel Gorman
From: Peter Zijlstra <[email protected]>
While parallel applications tend to align their data on the cache boundary, they tend not to align on the page or THP boundary. Consequently tasks that partition their data can still "false-share" pages presenting a problem for optimal NUMA placement.
This patch uses NUMA hinting faults to chain tasks together into
numa_groups. As well as storing the NID a task was running on when accessing a page a truncated representation of the faulting PID is stored. If subsequent faults are from different PIDs it is reasonable to assume that those two tasks share a page and are candidates for being grouped together. Note that this patch makes no scheduling decisions based on the grouping information.
Quoted 2 lines
Signed-off-by Peter Zijlstra <[email protected]>Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Peter Zijlstra
merge bot[tip:sched/core] sched/numa: Use {cpu, pid} to create task groups for shared faults
In reply to Mel Gormansched/numa: Use {cpu, pid} to create task groups for shared faults
Commit-ID: 8c8a743c5087bac9caac8155b8f3b367e75cdd0b Gitweb: http://git.kernel.org/tip/8c8a743c5087bac9caac8155b8f3b367e75cdd0b Author: Peter Zijlstra <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:21 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:47 +0200
sched/numa: Use {cpu, pid} to create task groups for shared faults
While parallel applications tend to align their data on the cache boundary, they tend not to align on the page or THP boundary. Consequently tasks that partition their data can still "false-share" pages presenting a problem for optimal NUMA placement.
This patch uses NUMA hinting faults to chain tasks together into numa_groups. As well as storing the NID a task was running on when accessing a page a truncated representation of the faulting PID is stored. If subsequent faults are from different PIDs it is reasonable to assume that those two tasks share a page and are candidates for being grouped together. Note that this patch makes no scheduling decisions based on the grouping information.
--- include/linux/mm.h | 11 ++++ include/linux/sched.h | 3 + kernel/sched/core.c | 3 + kernel/sched/fair.c | 165 +++++++++++++++++++++++++++++++++++++++++++++++--- kernel/sched/sched.h | 5 +- mm/memory.c | 8 +++ 6 files changed, 182 insertions(+), 13 deletions(-)
include/linux/mm.h +11 -0
@@ -691,6 +691,12 @@ static inline bool cpupid_cpu_unset(int cpupid)return cpupid_to_cpu (cpupid) == (-1 &LAST__CPU_MASK ); } +static inline bool __cpupid_match_pid (pid_t task_pid,int cpupid) +{ +return (task_pid &LAST__PID_MASK ) ==cpupid_to_pid (cpupid); +} + +#define cpupid_match_pid (task, cpupid) __cpupid_match_pid(task->pid, cpupid)#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS static inline int page_cpupid_xchg_last (struct page *page,int cpupid) {
@@ -760,6 +766,11 @@ static inline bool cpupid_pid_unset(int cpupid)static inline void page_cpupid_reset_last (struct page *page) { } + +static inline bool cpupid_match_pid (struct task_struct *task,int cpupid) +{ +return false; +}#endif /* CONFIG_NUMA_BALANCING */ static inline struct zone *page_zone (const struct page *page)
include/linux/sched.h +3 -0
@@ -1347,6 +1347,9 @@ struct task_struct {u64 node_stamp;/* migration stamp */ struct callback_head numa_work; +struct list_head numa_entry; +struct numa_group *numa_group; +/* * Exponential decaying average of faults on a per-node basis. * Scheduling placement decisions are made based on the these counts.
kernel/sched/core.c +3 -0
@@ -1733,6 +1733,9 @@ static void __sched_fork(struct task_struct *p) p->numa_work.next = &p->numa_work; p->numa_faults =NULL ; p->numa_faults_buffer =NULL ; + +INIT_LIST_HEAD (&p->numa_entry); + p->numa_group =NULL ;#endif /* CONFIG_NUMA_BALANCING */ }
kernel/sched/fair.c +156 -9
202 lines not on this page · raw message
kernel/sched/sched.h +1 -4
@@ -559,10 +559,7 @@ static inline u64 rq_clock_task(struct rq *rq)#ifdef CONFIG_NUMA_BALANCING extern int migrate_task_to (struct task_struct *p,int cpu);extern int migrate_swap (struct task_struct *,struct task_struct *); -static inline void task_numa_free (struct task_struct *p) -{ -kfree (p->numa_faults); -} +extern void task_numa_free (struct task_struct *p);#else /* CONFIG_NUMA_BALANCING */ static inline void task_numa_free (struct task_struct *p) {
mm/memory.c +8 -0
@@ -2719,6 +2719,14 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,get_page (dirty_page); reuse: +/* +* Clear the pages cpupid information as the existing +* information potentially belongs to a now completely +* unrelated process. +*/ +if (old_page) +page_cpupid_xchg_last (old_page, (1 <<LAST_CPUPID_SHIFT ) -1 ); +flush_cache_page (vma, address,pte_pfn (orig_pte)); entry =pte_mkyoung (orig_pte); entry =maybe_mkwrite (pte_mkdirty (entry), vma);
Mel Gorman
reviewerPATCH 44/63 sched: numa: Report a NUMA task group ID
In reply to Mel GormanIt is desirable to model from userspace how the scheduler groups tasks over time. This patch adds an ID to the numa_group and reports it via /proc/PID/status.
--- fs/proc/array.c | 2 ++ include/linux/sched.h | 5 +++++ kernel/sched/fair.c | 7 +++++++ 3 files changed, 14 insertions(+)
fs/proc/array.c +2 -0
@@ -183,6 +183,7 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,seq_printf (m,"State:\t%s\n" "Tgid:\t%d\n" +"Ngid:\t%d\n" "Pid:\t%d\n" "PPid:\t%d\n" "TracerPid:\t%d\n"
@@ -190,6 +191,7 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,"Gid:\t%d\t%d\t%d\t%d\n" ,get_task_state (p),task_tgid_nr_ns (p, ns), +task_numa_group_id (p),pid_nr_ns (pid, ns), ppid, tpid, from_kuid_munged(user_ns, cred->uid),
include/linux/sched.h +5 -0
@@ -1442,12 +1442,17 @@ struct task_struct {#ifdef CONFIG_NUMA_BALANCING extern void task_numa_fault (int last_node,int node,int pages,bool migrated); +extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled);#else static inline void task_numa_fault (int last_node,int node,int pages,bool migrated) { } +static inline pid_t task_numa_group_id (struct task_struct *p) +{ +return 0 ; +}static inline void set_numabalancing_state (bool enabled) { }
kernel/sched/fair.c +7 -0
@@ -893,12 +893,18 @@ struct numa_group {spinlock_t lock;/* nr_tasks, tasks */ int nr_tasks; +pid_t gid;struct list_head task_list;struct rcu_head rcu;atomic_long_t faults[0 ]; }; +pid_t task_numa_group_id (struct task_struct *p) +{ +return p->numa_group ? p->numa_group->gid :0 ; +} +static inline int task_faults_idx (int nid,int priv) {return 2 * nid + priv;
@@ -1265,6 +1271,7 @@ static void task_numa_group(struct task_struct *p, int cpupid)atomic_set (&grp->refcount,1 );spin_lock_init (&grp->lock);INIT_LIST_HEAD (&grp->task_list); + grp->gid = p->pid;for (i =0 ; i <2 *nr_node_ids; i++)atomic_long_set (&grp->faults[i], p->numa_faults[i]);
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 44/63] sched: numa: Report a NUMA task group ID
Quoted 5 lines · Mel Gorman
It is desirable to model from userspace how the scheduler groups tasks over time. This patch adds an ID to the
numa_groupand reports it via/proc/PID/status.Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] sched/numa: Report a NUMA task group ID
In reply to Mel Gormansched/numa: Report a NUMA task group ID
Commit-ID: e29cf08b05dc0b8151d65704d96d525a9e179a6b Gitweb: http://git.kernel.org/tip/e29cf08b05dc0b8151d65704d96d525a9e179a6b Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:22 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:49 +0200
sched/numa: Report a NUMA task group ID
It is desirable to model from userspace how the scheduler groups tasks over time. This patch adds an ID to the numa_group and reports it via /proc/PID/status.
--- fs/proc/array.c | 2 ++ include/linux/sched.h | 5 +++++ kernel/sched/fair.c | 7 +++++++ 3 files changed, 14 insertions(+)
fs/proc/array.c +2 -0
@@ -183,6 +183,7 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,seq_printf (m,"State:\t%s\n" "Tgid:\t%d\n" +"Ngid:\t%d\n" "Pid:\t%d\n" "PPid:\t%d\n" "TracerPid:\t%d\n"
@@ -190,6 +191,7 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,"Gid:\t%d\t%d\t%d\t%d\n" ,get_task_state (p),task_tgid_nr_ns (p, ns), +task_numa_group_id (p),pid_nr_ns (pid, ns), ppid, tpid, from_kuid_munged(user_ns, cred->uid),
include/linux/sched.h +5 -0
@@ -1452,12 +1452,17 @@ struct task_struct {#ifdef CONFIG_NUMA_BALANCING extern void task_numa_fault (int last_node,int node,int pages,bool migrated); +extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled);#else static inline void task_numa_fault (int last_node,int node,int pages,bool migrated) { } +static inline pid_t task_numa_group_id (struct task_struct *p) +{ +return 0 ; +}static inline void set_numabalancing_state (bool enabled) { }
kernel/sched/fair.c +7 -0
@@ -893,12 +893,18 @@ struct numa_group {spinlock_t lock;/* nr_tasks, tasks */ int nr_tasks; +pid_t gid;struct list_head task_list;struct rcu_head rcu;atomic_long_t faults[0 ]; }; +pid_t task_numa_group_id (struct task_struct *p) +{ +return p->numa_group ? p->numa_group->gid :0 ; +} +static inline int task_faults_idx (int nid,int priv) {return 2 * nid + priv;
@@ -1265,6 +1271,7 @@ static void task_numa_group(struct task_struct *p, int cpupid)atomic_set (&grp->refcount,1 );spin_lock_init (&grp->lock);INIT_LIST_HEAD (&grp->task_list); + grp->gid = p->pid;for (i =0 ; i <2 *nr_node_ids; i++)atomic_long_set (&grp->faults[i], p->numa_faults[i]);
Mel Gorman
reviewerPATCH 45/63 mm: numa: copy cpupid on page migration
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
After page migration, the new page has the nidpid unset. This makes every fault on a recently migrated page look like a first numa fault, leading to another page migration.
Copying over the nidpid at page migration time should prevent erroneous migrations of recently migrated pages.
--- mm/migrate.c | 9 +++++++++ 1 file changed, 9 insertions(+)
mm/migrate.c +9 -0
@@ -443,6 +443,8 @@ int migrate_huge_page_move_mapping(struct address_space *mapping,*/ void migrate_page_copy (struct page *newpage,struct page *page) { +int cpupid; +if (PageHuge (page) ||PageTransHuge (page))copy_huge_page (newpage, page);else
@@ -479,6 +481,13 @@ void migrate_page_copy(struct page *newpage, struct page *page)__set_page_dirty_nobuffers (newpage); } +/* +* Copy NUMA information to the new page, to prevent over-eager +* future migrations of this same page. +*/ + cpupid =page_cpupid_xchg_last (page,-1 ); +page_cpupid_xchg_last (newpage, cpupid); +mlock_migrate_page (newpage, page);ksm_migrate_page (newpage, page);/*
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] mm: numa: Copy cpupid on page migration
mm: numa: Copy cpupid on page migration
Commit-ID: 7851a45cd3f6198bf542c30e27b330e8eeb3736c Gitweb: http://git.kernel.org/tip/7851a45cd3f6198bf542c30e27b330e8eeb3736c Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:23 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:51 +0200
mm: numa: Copy cpupid on page migration
After page migration, the new page has the nidpid unset. This makes every fault on a recently migrated page look like a first numa fault, leading to another page migration.
Copying over the nidpid at page migration time should prevent erroneous migrations of recently migrated pages.
--- mm/migrate.c | 9 +++++++++ 1 file changed, 9 insertions(+)
mm/migrate.c +9 -0
@@ -443,6 +443,8 @@ int migrate_huge_page_move_mapping(struct address_space *mapping,*/ void migrate_page_copy (struct page *newpage,struct page *page) { +int cpupid; +if (PageHuge (page) ||PageTransHuge (page))copy_huge_page (newpage, page);else
@@ -479,6 +481,13 @@ void migrate_page_copy(struct page *newpage, struct page *page)__set_page_dirty_nobuffers (newpage); } +/* +* Copy NUMA information to the new page, to prevent over-eager +* future migrations of this same page. +*/ + cpupid =page_cpupid_xchg_last (page,-1 ); +page_cpupid_xchg_last (newpage, cpupid); +mlock_migrate_page (newpage, page);ksm_migrate_page (newpage, page);/*
Mel Gorman
reviewerPATCH 46/63 mm: numa: Do not group on RO pages
In reply to Mel GormanFrom: Peter Zijlstra <[email protected]>
And here's a little something to make sure not the whole world ends up in a single group.
As while we don't migrate shared executable pages, we do scan/fault on them. And since everybody links to libc, everybody ends up in the same group.
--- include/linux/sched.h | 7 +++++-- kernel/sched/fair.c | 5 +++-- mm/huge_memory.c | 15 +++++++++++++-- mm/memory.c | 30 ++++++++++++++++++++++++++---- 4 files changed, 47 insertions(+), 10 deletions(-)
include/linux/sched.h +5 -2
@@ -1440,13 +1440,16 @@ struct task_struct {/* Future-safe accessor for struct task_struct's cpus_allowed. */ #define tsk_cpus_allowed (tsk) (&(tsk)->cpus_allowed) +#define TNF_MIGRATED 0x01 +#define TNF_NO_GROUP 0x02 +#ifdef CONFIG_NUMA_BALANCING -extern void task_numa_fault (int last_node,int node,int pages,bool migrated); +extern void task_numa_fault (int last_node,int node,int pages,int flags);extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled);#else static inline void task_numa_fault (int last_node,int node,int pages, -bool migrated) +int flags) { }static inline pid_t task_numa_group_id (struct task_struct *p)
kernel/sched/fair.c +3 -2
@@ -1361,9 +1361,10 @@ void task_numa_free(struct task_struct *p)/* * Got a PROT_NONE fault for a page on @node. */ -void task_numa_fault (int last_cpupid,int node,int pages,bool migrated) +void task_numa_fault (int last_cpupid,int node,int pages,int flags) {struct task_struct *p = current; +bool migrated = flags &TNF_MIGRATED ;int priv;if (!numabalancing_enabled)
@@ -1394,7 +1395,7 @@ void task_numa_fault(int last_cpupid, int node, int pages, bool migrated) priv =1 ; }else { priv =cpupid_match_pid (p, last_cpupid); -if (!priv) +if (!priv && !(flags &TNF_NO_GROUP ))task_numa_group (p, last_cpupid); }
mm/huge_memory.c +13 -2
@@ -1285,6 +1285,7 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,int target_nid, last_cpupid =-1 ;bool page_locked;bool migrated = false; +int flags =0 ;spin_lock (&mm->page_table_lock);if (unlikely (!pmd_same (pmd, *pmdp)))
@@ -1299,6 +1300,14 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL );/* +* Avoid grouping on DSO/COW pages in specific and RO pages +* in general, RO pages shouldn't hurt as much anyway since +* they can be in shared cache state. +*/ +if (!pmd_write (pmd)) + flags |=TNF_NO_GROUP ; + +/* * Acquire the page lock to serialise THP migrations but avoid dropping * page_table_lock if at all possible */
@@ -1343,8 +1352,10 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,spin_unlock (&mm->page_table_lock); migrated =migrate_misplaced_transhuge_page (mm, vma, pmdp, pmd, addr, page, target_nid); -if (migrated) +if (migrated) { + flags |=TNF_MIGRATED ; page_nid = target_nid; + } goto out; clear_pmdnuma:
@@ -1362,7 +1373,7 @@ out:page_unlock_anon_vma_read (anon_vma);if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,HPAGE_PMD_NR , migrated); +task_numa_fault (last_cpupid, page_nid,HPAGE_PMD_NR , flags);return 0 ; }
mm/memory.c +26 -4
@@ -3547,6 +3547,7 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,int last_cpupid;int target_nid;bool migrated = false; +int flags =0 ;/* * The "pte" at this point cannot be used safely without
@@ -3575,6 +3576,14 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, }BUG_ON (is_zero_pfn (page_to_pfn (page))); +/* +* Avoid grouping on DSO/COW pages in specific and RO pages +* in general, RO pages shouldn't hurt as much anyway since +* they can be in shared cache state. +*/ +if (!pte_write (pte)) + flags |=TNF_NO_GROUP ; + last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); target_nid =numa_migrate_prep (page, vma, addr, page_nid);
@@ -3586,12 +3595,14 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,/* Migrate to the requested node */ migrated =migrate_misplaced_page (page, vma, target_nid); -if (migrated) +if (migrated) { page_nid = target_nid; + flags |=TNF_MIGRATED ; + } out:if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,1 , migrated); +task_numa_fault (last_cpupid, page_nid,1 , flags);return 0 ; }
@@ -3632,6 +3643,7 @@ static int do_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,int page_nid =-1 ;int target_nid;bool migrated = false; +int flags =0 ;if (!pte_present (pteval))continue ;
@@ -3651,20 +3663,30 @@ static int do_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,if (unlikely (!page))continue ; +/* +* Avoid grouping on DSO/COW pages in specific and RO pages +* in general, RO pages shouldn't hurt as much anyway since +* they can be in shared cache state. +*/ +if (!pte_write (pteval)) + flags |=TNF_NO_GROUP ; + last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); target_nid =numa_migrate_prep (page, vma, addr, page_nid);pte_unmap_unlock (pte, ptl);if (target_nid !=-1 ) { migrated =migrate_misplaced_page (page, vma, target_nid); -if (migrated) +if (migrated) { page_nid = target_nid; + flags |=TNF_MIGRATED ; + } }else {put_page (page); }if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,1 , migrated); +task_numa_fault (last_cpupid, page_nid,1 , flags); pte =pte_offset_map_lock (mm, pmdp, addr, &ptl); }
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 46/63] mm: numa: Do not group on RO pages
Quoted 5 lines · Mel Gorman
From: Peter Zijlstra <[email protected]>
And here's a little something to make sure not the whole world ends up in a single group.
Quoted 8 lines
As while we don't migrate shared executable pages, we do scan/fault on them. And since everybody links to libc, everybody ends up in the same group.
[[email protected]: mapcount 1]Suggested-by Rik van Riel <[email protected]>Signed-off-by Peter Zijlstra <[email protected]>Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Peter Zijlstra
merge bot[tip:sched/core] mm: numa: Do not group on RO pages
In reply to Mel Gormanmm: numa: Do not group on RO pages
Commit-ID: 6688cc05473b36a0a3d3971e1adf1712919b32eb Gitweb: http://git.kernel.org/tip/6688cc05473b36a0a3d3971e1adf1712919b32eb Author: Peter Zijlstra <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:24 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:53 +0200
mm: numa: Do not group on RO pages
And here's a little something to make sure not the whole world ends up in a single group.
As while we don't migrate shared executable pages, we do scan/fault on them. And since everybody links to libc, everybody ends up in the same group.
--- include/linux/sched.h | 7 +++++-- kernel/sched/fair.c | 5 +++-- mm/huge_memory.c | 15 +++++++++++++-- mm/memory.c | 30 ++++++++++++++++++++++++++---- 4 files changed, 47 insertions(+), 10 deletions(-)
include/linux/sched.h +5 -2
@@ -1450,13 +1450,16 @@ struct task_struct {/* Future-safe accessor for struct task_struct's cpus_allowed. */ #define tsk_cpus_allowed (tsk) (&(tsk)->cpus_allowed) +#define TNF_MIGRATED 0x01 +#define TNF_NO_GROUP 0x02 +#ifdef CONFIG_NUMA_BALANCING -extern void task_numa_fault (int last_node,int node,int pages,bool migrated); +extern void task_numa_fault (int last_node,int node,int pages,int flags);extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled);#else static inline void task_numa_fault (int last_node,int node,int pages, -bool migrated) +int flags) { }static inline pid_t task_numa_group_id (struct task_struct *p)
kernel/sched/fair.c +3 -2
@@ -1361,9 +1361,10 @@ void task_numa_free(struct task_struct *p)/* * Got a PROT_NONE fault for a page on @node. */ -void task_numa_fault (int last_cpupid,int node,int pages,bool migrated) +void task_numa_fault (int last_cpupid,int node,int pages,int flags) {struct task_struct *p = current; +bool migrated = flags &TNF_MIGRATED ;int priv;if (!numabalancing_enabled)
@@ -1394,7 +1395,7 @@ void task_numa_fault(int last_cpupid, int node, int pages, bool migrated) priv =1 ; }else { priv =cpupid_match_pid (p, last_cpupid); -if (!priv) +if (!priv && !(flags &TNF_NO_GROUP ))task_numa_group (p, last_cpupid); }
mm/huge_memory.c +13 -2
@@ -1285,6 +1285,7 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,int target_nid, last_cpupid =-1 ;bool page_locked;bool migrated = false; +int flags =0 ;spin_lock (&mm->page_table_lock);if (unlikely (!pmd_same (pmd, *pmdp)))
@@ -1299,6 +1300,14 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL );/* +* Avoid grouping on DSO/COW pages in specific and RO pages +* in general, RO pages shouldn't hurt as much anyway since +* they can be in shared cache state. +*/ +if (!pmd_write (pmd)) + flags |=TNF_NO_GROUP ; + +/* * Acquire the page lock to serialise THP migrations but avoid dropping * page_table_lock if at all possible */
@@ -1343,8 +1352,10 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,spin_unlock (&mm->page_table_lock); migrated =migrate_misplaced_transhuge_page (mm, vma, pmdp, pmd, addr, page, target_nid); -if (migrated) +if (migrated) { + flags |=TNF_MIGRATED ; page_nid = target_nid; + } goto out; clear_pmdnuma:
@@ -1362,7 +1373,7 @@ out:page_unlock_anon_vma_read (anon_vma);if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,HPAGE_PMD_NR , migrated); +task_numa_fault (last_cpupid, page_nid,HPAGE_PMD_NR , flags);return 0 ; }
mm/memory.c +26 -4
@@ -3547,6 +3547,7 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,int last_cpupid;int target_nid;bool migrated = false; +int flags =0 ;/* * The "pte" at this point cannot be used safely without
@@ -3575,6 +3576,14 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, }BUG_ON (is_zero_pfn (page_to_pfn (page))); +/* +* Avoid grouping on DSO/COW pages in specific and RO pages +* in general, RO pages shouldn't hurt as much anyway since +* they can be in shared cache state. +*/ +if (!pte_write (pte)) + flags |=TNF_NO_GROUP ; + last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); target_nid =numa_migrate_prep (page, vma, addr, page_nid);
@@ -3586,12 +3595,14 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,/* Migrate to the requested node */ migrated =migrate_misplaced_page (page, vma, target_nid); -if (migrated) +if (migrated) { page_nid = target_nid; + flags |=TNF_MIGRATED ; + } out:if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,1 , migrated); +task_numa_fault (last_cpupid, page_nid,1 , flags);return 0 ; }
@@ -3632,6 +3643,7 @@ static int do_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,int page_nid =-1 ;int target_nid;bool migrated = false; +int flags =0 ;if (!pte_present (pteval))continue ;
@@ -3651,20 +3663,30 @@ static int do_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,if (unlikely (!page))continue ; +/* +* Avoid grouping on DSO/COW pages in specific and RO pages +* in general, RO pages shouldn't hurt as much anyway since +* they can be in shared cache state. +*/ +if (!pte_write (pteval)) + flags |=TNF_NO_GROUP ; + last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); target_nid =numa_migrate_prep (page, vma, addr, page_nid);pte_unmap_unlock (pte, ptl);if (target_nid !=-1 ) { migrated =migrate_misplaced_page (page, vma, target_nid); -if (migrated) +if (migrated) { page_nid = target_nid; + flags |=TNF_MIGRATED ; + } }else {put_page (page); }if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,1 , migrated); +task_numa_fault (last_cpupid, page_nid,1 , flags); pte =pte_offset_map_lock (mm, pmdp, addr, &ptl); }
Mel Gorman
reviewerPATCH 47/63 mm: numa: Do not batch handle PMD pages
In reply to Mel GormanWith the THP migration races closed it is still possible to occasionally see corruption. The problem is related to handling PMD pages in batch. When a page fault is handled it can be assumed that the page being faulted will also be flushed from the TLB. The same flushing does not happen when handling PMD pages in batch. Fixing is straight forward but there are a number of reasons not to
1. Multiple TLB flushes may have to be sent depending on what pages get migrated
2. The handling of PMDs in batch means that faults get accounted to the task that is handling the fault. While care is taken to only mark PMDs where the last CPU and PID match it can still have problems due to PID truncation when matching PIDs.
3. Batching on the PMD level may reduce faults but setting pmd_numa requires taking a heavy lock that can contend with THP migration and handling the fault requires the release/acquisition of the PTL for every page migrated. It's still pretty heavy.
PMD batch handling is not something that people ever have been happy with. This patch removes it and later patches will deal with the additional fault overhead using more installigent migrate rate adaption.
--- mm/memory.c | 101 ++-------------------------------------------------------- mm/mprotect.c | 47 ++------------------------- 2 files changed, 4 insertions(+), 144 deletions(-)
mm/memory.c +2 -99
@@ -3606,103 +3606,6 @@ out:return 0 ; } -/* NUMA hinting page fault entry point for regular pmds */ -#ifdef CONFIG_NUMA_BALANCING -static int do_pmd_numa_page (struct mm_struct *mm,struct vm_area_struct *vma, -unsigned long addr,pmd_t *pmdp) -{ -pmd_t pmd; -pte_t *pte, *orig_pte; -unsigned long _addr = addr &PMD_MASK ; -unsigned long offset; -spinlock_t *ptl; -bool numa = false; -int last_cpupid; - -spin_lock (&mm->page_table_lock); - pmd = *pmdp; -if (pmd_numa (pmd)) { -set_pmd_at (mm, _addr, pmdp,pmd_mknonnuma (pmd)); - numa = true; - } -spin_unlock (&mm->page_table_lock); - -if (!numa) -return 0 ; - -/* we're in a page fault so some vma must be in the range */ -BUG_ON (!vma); -BUG_ON (vma->vm_start >= _addr +PMD_SIZE ); - offset =max (_addr, vma->vm_start) & ~PMD_MASK ; -VM_BUG_ON (offset >=PMD_SIZE ); - orig_pte = pte =pte_offset_map_lock (mm, pmdp, _addr, &ptl); - pte += offset >>PAGE_SHIFT ; -for (addr = _addr + offset; addr < _addr +PMD_SIZE ; pte++, addr +=PAGE_SIZE ) { -pte_t pteval = *pte; -struct page *page; -int page_nid =-1 ; -int target_nid; -bool migrated = false; -int flags =0 ; - -if (!pte_present (pteval)) -continue ; -if (!pte_numa (pteval)) -continue ; -if (addr >= vma->vm_end) { - vma =find_vma (mm, addr); -/* there's a pte present so there must be a vma */ -BUG_ON (!vma); -BUG_ON (addr < vma->vm_start); - } -if (pte_numa (pteval)) { - pteval =pte_mknonnuma (pteval); -set_pte_at (mm, addr, pte, pteval); - } - page =vm_normal_page (vma, addr, pteval); -if (unlikely (!page)) -continue ; - -/* -* Avoid grouping on DSO/COW pages in specific and RO pages -* in general, RO pages shouldn't hurt as much anyway since -* they can be in shared cache state. -*/ -if (!pte_write (pteval)) - flags |=TNF_NO_GROUP ; - - last_cpupid =page_cpupid_last (page); - page_nid =page_to_nid (page); - target_nid =numa_migrate_prep (page, vma, addr, page_nid); -pte_unmap_unlock (pte, ptl); -if (target_nid !=-1 ) { - migrated =migrate_misplaced_page (page, vma, target_nid); -if (migrated) { - page_nid = target_nid; - flags |=TNF_MIGRATED ; - } - }else { -put_page (page); - } - -if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,1 , flags); - - pte =pte_offset_map_lock (mm, pmdp, addr, &ptl); - } -pte_unmap_unlock (orig_pte, ptl); - -return 0 ; -} -#else -static int do_pmd_numa_page (struct mm_struct *mm,struct vm_area_struct *vma, -unsigned long addr,pmd_t *pmdp) -{ -BUG (); -return 0 ; -} -#endif /* CONFIG_NUMA_BALANCING */ -/* * These routines also need to handle stuff like marking pages dirty * and/or accessed for architectures that don't do it in hardware (most
@@ -3841,8 +3744,8 @@ retry: } } -if (pmd_numa (*pmd)) -return do_pmd_numa_page (mm, vma, address, pmd); +/* THP should already have been handled */ +BUG_ON (pmd_numa (*pmd));/* * Use __pte_alloc instead of pte_alloc_map, because we can't
mm/mprotect.c +2 -45
86 lines not on this page · raw message
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 47/63] mm: numa: Do not batch handle PMD pages
Quoted 18 lines · Mel Gorman
With the THP migration races closed it is still possible to occasionally see corruption. The problem is related to handling PMD pages in batch. When a page fault is handled it can be assumed that the page being faulted will also be flushed from the TLB. The same flushing does not happen when handling PMD pages in batch. Fixing is straight forward but there are a number of reasons not to
1. Multiple TLB flushes may have to be sent depending on what pages get migrated
2. The handling of PMDs in batch means that faults get accounted to the task that is handling the fault. While care is taken to only mark PMDs where the last CPU and PID match it can still have problems due to PID truncation when matching PIDs.
3. Batching on the PMD level may reduce faults but settingpmd_numarequires taking a heavy lock that can contend with THP migration and handling the fault requires the release/acquisition of the PTL for every page migrated. It's still pretty heavy.
Quoted 5 lines
PMD batch handling is not something that people ever have been happy with. This patch removes it and later patches will deal with the additional fault overhead using more installigent migrate rate adaption.
Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] mm: numa: Do not batch handle PMD pages
In reply to Mel Gormanmm: numa: Do not batch handle PMD pages
Commit-ID: 0f19c17929c952c6f0966d93ab05558e7bf814cc Gitweb: http://git.kernel.org/tip/0f19c17929c952c6f0966d93ab05558e7bf814cc Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:25 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:55 +0200
mm: numa: Do not batch handle PMD pages
With the THP migration races closed it is still possible to occasionally see corruption. The problem is related to handling PMD pages in batch. When a page fault is handled it can be assumed that the page being faulted will also be flushed from the TLB. The same flushing does not happen when handling PMD pages in batch. Fixing is straight forward but there are a number of reasons not to
1. Multiple TLB flushes may have to be sent depending on what pages get migrated
2. The handling of PMDs in batch means that faults get accounted to the task that is handling the fault. While care is taken to only mark PMDs where the last CPU and PID match it can still have problems due to PID truncation when matching PIDs.
3. Batching on the PMD level may reduce faults but setting pmd_numa requires taking a heavy lock that can contend with THP migration and handling the fault requires the release/acquisition of the PTL for every page migrated. It's still pretty heavy.
PMD batch handling is not something that people ever have been happy with. This patch removes it and later patches will deal with the additional fault overhead using more installigent migrate rate adaption.
--- mm/memory.c | 101 ++-------------------------------------------------------- mm/mprotect.c | 47 ++------------------------- 2 files changed, 4 insertions(+), 144 deletions(-)
mm/memory.c +2 -99
@@ -3606,103 +3606,6 @@ out:return 0 ; } -/* NUMA hinting page fault entry point for regular pmds */ -#ifdef CONFIG_NUMA_BALANCING -static int do_pmd_numa_page (struct mm_struct *mm,struct vm_area_struct *vma, -unsigned long addr,pmd_t *pmdp) -{ -pmd_t pmd; -pte_t *pte, *orig_pte; -unsigned long _addr = addr &PMD_MASK ; -unsigned long offset; -spinlock_t *ptl; -bool numa = false; -int last_cpupid; - -spin_lock (&mm->page_table_lock); - pmd = *pmdp; -if (pmd_numa (pmd)) { -set_pmd_at (mm, _addr, pmdp,pmd_mknonnuma (pmd)); - numa = true; - } -spin_unlock (&mm->page_table_lock); - -if (!numa) -return 0 ; - -/* we're in a page fault so some vma must be in the range */ -BUG_ON (!vma); -BUG_ON (vma->vm_start >= _addr +PMD_SIZE ); - offset =max (_addr, vma->vm_start) & ~PMD_MASK ; -VM_BUG_ON (offset >=PMD_SIZE ); - orig_pte = pte =pte_offset_map_lock (mm, pmdp, _addr, &ptl); - pte += offset >>PAGE_SHIFT ; -for (addr = _addr + offset; addr < _addr +PMD_SIZE ; pte++, addr +=PAGE_SIZE ) { -pte_t pteval = *pte; -struct page *page; -int page_nid =-1 ; -int target_nid; -bool migrated = false; -int flags =0 ; - -if (!pte_present (pteval)) -continue ; -if (!pte_numa (pteval)) -continue ; -if (addr >= vma->vm_end) { - vma =find_vma (mm, addr); -/* there's a pte present so there must be a vma */ -BUG_ON (!vma); -BUG_ON (addr < vma->vm_start); - } -if (pte_numa (pteval)) { - pteval =pte_mknonnuma (pteval); -set_pte_at (mm, addr, pte, pteval); - } - page =vm_normal_page (vma, addr, pteval); -if (unlikely (!page)) -continue ; - -/* -* Avoid grouping on DSO/COW pages in specific and RO pages -* in general, RO pages shouldn't hurt as much anyway since -* they can be in shared cache state. -*/ -if (!pte_write (pteval)) - flags |=TNF_NO_GROUP ; - - last_cpupid =page_cpupid_last (page); - page_nid =page_to_nid (page); - target_nid =numa_migrate_prep (page, vma, addr, page_nid); -pte_unmap_unlock (pte, ptl); -if (target_nid !=-1 ) { - migrated =migrate_misplaced_page (page, vma, target_nid); -if (migrated) { - page_nid = target_nid; - flags |=TNF_MIGRATED ; - } - }else { -put_page (page); - } - -if (page_nid !=-1 ) -task_numa_fault (last_cpupid, page_nid,1 , flags); - - pte =pte_offset_map_lock (mm, pmdp, addr, &ptl); - } -pte_unmap_unlock (orig_pte, ptl); - -return 0 ; -} -#else -static int do_pmd_numa_page (struct mm_struct *mm,struct vm_area_struct *vma, -unsigned long addr,pmd_t *pmdp) -{ -BUG (); -return 0 ; -} -#endif /* CONFIG_NUMA_BALANCING */ -/* * These routines also need to handle stuff like marking pages dirty * and/or accessed for architectures that don't do it in hardware (most
@@ -3841,8 +3744,8 @@ retry: } } -if (pmd_numa (*pmd)) -return do_pmd_numa_page (mm, vma, address, pmd); +/* THP should already have been handled */ +BUG_ON (pmd_numa (*pmd));/* * Use __pte_alloc instead of pte_alloc_map, because we can't
mm/mprotect.c +2 -45
86 lines not on this page · raw message
Mel Gorman
reviewerPATCH 48/63 sched: numa: stay on the same node if CLONE_VM
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
A newly spawned thread inside a process should stay on the same NUMA node as its parent. This prevents processes from being "torn" across multiple NUMA nodes every time they spawn a new thread.
--- include/linux/sched.h | 2 +- kernel/fork.c | 2 +- kernel/sched/core.c | 14 +++++++++----- 3 files changed, 11 insertions(+), 7 deletions(-)
include/linux/sched.h +1 -1
@@ -2011,7 +2011,7 @@ extern void wake_up_new_task(struct task_struct *tsk);#else static inline void kick_process (struct task_struct *tsk) { }#endif -extern void sched_fork (struct task_struct *p); +extern void sched_fork (unsigned long clone_flags,struct task_struct *p);extern void sched_dead (struct task_struct *p);extern void proc_caches_init (void );
kernel/fork.c +1 -1
@@ -1310,7 +1310,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,#endif /* Perform scheduler related setup. Assign this task to a CPU. */ -sched_fork (p); +sched_fork (clone_flags, p); retval =perf_event_init_task (p);if (retval)
kernel/sched/core.c +9 -5
@@ -1691,7 +1691,7 @@ int wake_up_state(struct task_struct *p, unsigned int state)* * __sched_fork() is basic setup used by init_idle() too: */ -static void __sched_fork (struct task_struct *p) +static void __sched_fork (unsigned long clone_flags,struct task_struct *p) { p->on_rq =0 ;
@@ -1720,11 +1720,15 @@ static void __sched_fork(struct task_struct *p) p->mm->numa_scan_seq =0 ; } +if (clone_flags &CLONE_VM ) + p->numa_preferred_nid = current->numa_preferred_nid; +else + p->numa_preferred_nid =-1 ; + p->node_stamp =0ULL ; p->numa_scan_seq = p->mm ? p->mm->numa_scan_seq :0 ; p->numa_migrate_seq =1 ; p->numa_scan_period = sysctl_numa_balancing_scan_delay; - p->numa_preferred_nid =-1 ; p->numa_work.next = &p->numa_work; p->numa_faults =NULL ; p->numa_faults_buffer =NULL ;
@@ -1758,12 +1762,12 @@ void set_numabalancing_state(bool enabled)/* * fork()/clone()-time setup: */ -void sched_fork (struct task_struct *p) +void sched_fork (unsigned long clone_flags,struct task_struct *p) {unsigned long flags;int cpu =get_cpu (); -__sched_fork (p); +__sched_fork (clone_flags, p);/* * We mark the process as running here. This guarantees that * nobody will actually run it, and a signal or other external
@@ -4292,7 +4296,7 @@ void init_idle(struct task_struct *idle, int cpu)raw_spin_lock_irqsave (&rq->lock, flags); -__sched_fork (idle); +__sched_fork (0 , idle); idle->state =TASK_RUNNING ; idle->se.exec_start =sched_clock ();
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Stay on the same node if CLONE_VM
sched/numa: Stay on the same node if CLONE_VM
Commit-ID: 5e1576ed0e54d419286a8096133029062b6ad456 Gitweb: http://git.kernel.org/tip/5e1576ed0e54d419286a8096133029062b6ad456 Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:26 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:57 +0200
sched/numa: Stay on the same node if CLONE_VM
A newly spawned thread inside a process should stay on the same NUMA node as its parent. This prevents processes from being "torn" across multiple NUMA nodes every time they spawn a new thread.
--- include/linux/sched.h | 2 +- kernel/fork.c | 2 +- kernel/sched/core.c | 14 +++++++++----- 3 files changed, 11 insertions(+), 7 deletions(-)
include/linux/sched.h +1 -1
@@ -2021,7 +2021,7 @@ extern void wake_up_new_task(struct task_struct *tsk);#else static inline void kick_process (struct task_struct *tsk) { }#endif -extern void sched_fork (struct task_struct *p); +extern void sched_fork (unsigned long clone_flags,struct task_struct *p);extern void sched_dead (struct task_struct *p);extern void proc_caches_init (void );
kernel/fork.c +1 -1
@@ -1310,7 +1310,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,#endif /* Perform scheduler related setup. Assign this task to a CPU. */ -sched_fork (p); +sched_fork (clone_flags, p); retval =perf_event_init_task (p);if (retval)
kernel/sched/core.c +9 -5
@@ -1696,7 +1696,7 @@ int wake_up_state(struct task_struct *p, unsigned int state)* * __sched_fork() is basic setup used by init_idle() too: */ -static void __sched_fork (struct task_struct *p) +static void __sched_fork (unsigned long clone_flags,struct task_struct *p) { p->on_rq =0 ;
@@ -1725,11 +1725,15 @@ static void __sched_fork(struct task_struct *p) p->mm->numa_scan_seq =0 ; } +if (clone_flags &CLONE_VM ) + p->numa_preferred_nid = current->numa_preferred_nid; +else + p->numa_preferred_nid =-1 ; + p->node_stamp =0ULL ; p->numa_scan_seq = p->mm ? p->mm->numa_scan_seq :0 ; p->numa_migrate_seq =1 ; p->numa_scan_period = sysctl_numa_balancing_scan_delay; - p->numa_preferred_nid =-1 ; p->numa_work.next = &p->numa_work; p->numa_faults =NULL ; p->numa_faults_buffer =NULL ;
@@ -1761,12 +1765,12 @@ void set_numabalancing_state(bool enabled)/* * fork()/clone()-time setup: */ -void sched_fork (struct task_struct *p) +void sched_fork (unsigned long clone_flags,struct task_struct *p) {unsigned long flags;int cpu =get_cpu (); -__sched_fork (p); +__sched_fork (clone_flags, p);/* * We mark the process as running here. This guarantees that * nobody will actually run it, and a signal or other external
@@ -4287,7 +4291,7 @@ void init_idle(struct task_struct *idle, int cpu)raw_spin_lock_irqsave (&rq->lock, flags); -__sched_fork (idle); +__sched_fork (0 , idle); idle->state =TASK_RUNNING ; idle->se.exec_start =sched_clock ();
Mel Gorman
reviewerPATCH 49/63 sched: numa: use group fault statistics in numa placement
In reply to Mel GormanThis patch uses the fraction of faults on a particular node for both task and group, to figure out the best node to place a task. If the task and group statistics disagree on what the preferred node should be then a full rescan will select the node with the best combined weight.
--- include/linux/sched.h | 1 + kernel/sched/fair.c | 124 +++++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 108 insertions(+), 17 deletions(-)
include/linux/sched.h +1 -0
@@ -1346,6 +1346,7 @@ struct task_struct {* The values remain static for the duration of a PTE scan */ unsigned long *numa_faults; +unsigned long total_numa_faults;/* * numa_faults_buffer records faults per node during the current
kernel/sched/fair.c +107 -17
229 lines not on this page · raw message
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] sched/numa: Use group fault statistics in numa placement
sched/numa: Use group fault statistics in numa placement
Commit-ID: 83e1d2cd9eabec5164afea295ff06b941ae8e4a9 Gitweb: http://git.kernel.org/tip/83e1d2cd9eabec5164afea295ff06b941ae8e4a9 Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:27 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:47:58 +0200
sched/numa: Use group fault statistics in numa placement
This patch uses the fraction of faults on a particular node for both task and group, to figure out the best node to place a task. If the task and group statistics disagree on what the preferred node should be then a full rescan will select the node with the best combined weight.
--- include/linux/sched.h | 1 + kernel/sched/fair.c | 124 +++++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 108 insertions(+), 17 deletions(-)
include/linux/sched.h +1 -0
@@ -1356,6 +1356,7 @@ struct task_struct {* The values remain static for the duration of a PTE scan */ unsigned long *numa_faults; +unsigned long total_numa_faults;/* * numa_faults_buffer records faults per node during the current
kernel/sched/fair.c +107 -17
229 lines not on this page · raw message
Mel Gorman
reviewerPATCH 50/63 sched: numa: call task_numa_free from do_execve
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
It is possible for a task in a numa group to call exec, and have the new (unrelated) executable inherit the numa group association from its former self.
This has the potential to break numa grouping, and is trivial to fix.
--- fs/exec.c | 1 + include/linux/sched.h | 4 ++++ kernel/sched/fair.c | 9 ++++++++- kernel/sched/sched.h | 5 ----- 4 files changed, 13 insertions(+), 6 deletions(-)
fs/exec.c +1 -0
@@ -1547,6 +1547,7 @@ static int do_execve_common(const char *filename, current->fs->in_exec =0 ; current->in_execve =0 ;acct_update_integrals (current); +task_numa_free (current);free_bprm (bprm);if (displaced)put_files_struct (displaced);
include/linux/sched.h +4 -0
@@ -1448,6 +1448,7 @@ struct task_struct {extern void task_numa_fault (int last_node,int node,int pages,int flags);extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled); +extern void task_numa_free (struct task_struct *p);#else static inline void task_numa_fault (int last_node,int node,int pages,int flags)
@@ -1460,6 +1461,9 @@ static inline pid_t task_numa_group_id(struct task_struct *p)static inline void set_numabalancing_state (bool enabled) { } +static inline void task_numa_free (struct task_struct *p) +{ +}#endif static inline struct pid *task_pid (struct task_struct *task)
kernel/sched/fair.c +8 -1
@@ -1418,6 +1418,7 @@ void task_numa_free(struct task_struct *p) {struct numa_group *grp = p->numa_group;int i; +void *numa_faults = p->numa_faults;if (grp) {for (i =0 ; i <2 *nr_node_ids; i++)
@@ -1433,7 +1434,9 @@ void task_numa_free(struct task_struct *p)put_numa_group (grp); } -kfree (p->numa_faults); + p->numa_faults =NULL ; + p->numa_faults_buffer =NULL ; +kfree (numa_faults); }/*
@@ -1452,6 +1455,10 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags)if (!p->mm)return ; +/* Do not worry about placement if exiting */ +if (p->state ==TASK_DEAD ) +return ; +/* Allocate buffer to track faults on a per-node basis */ if (unlikely (!p->numa_faults)) {int size =sizeof (*p->numa_faults) *2 * nr_node_ids;
kernel/sched/sched.h +0 -5
@@ -556,11 +556,6 @@ static inline u64 rq_clock_task(struct rq *rq)#ifdef CONFIG_NUMA_BALANCING extern int migrate_task_to (struct task_struct *p,int cpu);extern int migrate_swap (struct task_struct *,struct task_struct *); -extern void task_numa_free (struct task_struct *p); -#else /* CONFIG_NUMA_BALANCING */ -static inline void task_numa_free (struct task_struct *p) -{ -}#endif /* CONFIG_NUMA_BALANCING */ #ifdef CONFIG_SMP
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Call task_numa_free() from do_execve ()
sched/numa: Call task_numa_free() from do_execve()
Commit-ID: 82727018b0d33d188e9916bcf76f18387484cb04 Gitweb: http://git.kernel.org/tip/82727018b0d33d188e9916bcf76f18387484cb04 Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:28 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:00 +0200
sched/numa: Call task_numa_free() from do_execve()
It is possible for a task in a numa group to call exec, and have the new (unrelated) executable inherit the numa group association from its former self.
This has the potential to break numa grouping, and is trivial to fix.
--- fs/exec.c | 1 + include/linux/sched.h | 4 ++++ kernel/sched/fair.c | 9 ++++++++- kernel/sched/sched.h | 5 ----- 4 files changed, 13 insertions(+), 6 deletions(-)
fs/exec.c +1 -0
@@ -1547,6 +1547,7 @@ static int do_execve_common(const char *filename, current->fs->in_exec =0 ; current->in_execve =0 ;acct_update_integrals (current); +task_numa_free (current);free_bprm (bprm);if (displaced)put_files_struct (displaced);
include/linux/sched.h +4 -0
@@ -1458,6 +1458,7 @@ struct task_struct {extern void task_numa_fault (int last_node,int node,int pages,int flags);extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled); +extern void task_numa_free (struct task_struct *p);#else static inline void task_numa_fault (int last_node,int node,int pages,int flags)
@@ -1470,6 +1471,9 @@ static inline pid_t task_numa_group_id(struct task_struct *p)static inline void set_numabalancing_state (bool enabled) { } +static inline void task_numa_free (struct task_struct *p) +{ +}#endif static inline struct pid *task_pid (struct task_struct *task)
kernel/sched/fair.c +8 -1
@@ -1418,6 +1418,7 @@ void task_numa_free(struct task_struct *p) {struct numa_group *grp = p->numa_group;int i; +void *numa_faults = p->numa_faults;if (grp) {for (i =0 ; i <2 *nr_node_ids; i++)
@@ -1433,7 +1434,9 @@ void task_numa_free(struct task_struct *p)put_numa_group (grp); } -kfree (p->numa_faults); + p->numa_faults =NULL ; + p->numa_faults_buffer =NULL ; +kfree (numa_faults); }/*
@@ -1452,6 +1455,10 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags)if (!p->mm)return ; +/* Do not worry about placement if exiting */ +if (p->state ==TASK_DEAD ) +return ; +/* Allocate buffer to track faults on a per-node basis */ if (unlikely (!p->numa_faults)) {int size =sizeof (*p->numa_faults) *2 * nr_node_ids;
kernel/sched/sched.h +0 -5
@@ -559,11 +559,6 @@ static inline u64 rq_clock_task(struct rq *rq)#ifdef CONFIG_NUMA_BALANCING extern int migrate_task_to (struct task_struct *p,int cpu);extern int migrate_swap (struct task_struct *,struct task_struct *); -extern void task_numa_free (struct task_struct *p); -#else /* CONFIG_NUMA_BALANCING */ -static inline void task_numa_free (struct task_struct *p) -{ -}#endif /* CONFIG_NUMA_BALANCING */ #ifdef CONFIG_SMP
Mel Gorman
reviewerPATCH 51/63 sched: numa: Prevent parallel updates to group stats during placement
In reply to Mel GormanHaving multiple tasks in a group go through task_numa_placement simultaneously can lead to a task picking a wrong node to run on, because the group stats may be in the middle of an update. This patch avoids parallel updates by holding the numa_group lock during placement decisions.
--- kernel/sched/fair.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-)
kernel/sched/fair.c +23 -12
@@ -1233,6 +1233,7 @@ static void task_numa_placement(struct task_struct *p) {int seq, nid, max_nid =-1 , max_group_nid =-1 ;unsigned long max_faults =0 , max_group_faults =0 ; +spinlock_t *group_lock =NULL ; seq =ACCESS_ONCE (p->mm->numa_scan_seq);if (p->numa_scan_seq == seq)
@@ -1241,6 +1242,12 @@ static void task_numa_placement(struct task_struct *p) p->numa_migrate_seq++; p->numa_scan_period_max =task_scan_max (p); +/* If the task is part of a group prevent parallel updates to group stats */ +if (p->numa_group) { + group_lock = &p->numa_group->lock; +spin_lock (group_lock); + } +/* Find the node with the highest number of faults */ for_each_online_node (nid) {unsigned long faults =0 , group_faults =0 ;
@@ -1279,20 +1286,24 @@ static void task_numa_placement(struct task_struct *p) } } -/* -* If the preferred task and group nids are different, -* iterate over the nodes again to find the best place. -*/ -if (p->numa_group && max_nid != max_group_nid) { -unsigned long weight, max_weight =0 ; - -for_each_online_node (nid) { - weight =task_weight (p, nid) +group_weight (p, nid); -if (weight > max_weight) { - max_weight = weight; - max_nid = nid; +if (p->numa_group) { +/* +* If the preferred task and group nids are different, +* iterate over the nodes again to find the best place. +*/ +if (max_nid != max_group_nid) { +unsigned long weight, max_weight =0 ; + +for_each_online_node (nid) { + weight =task_weight (p, nid) +group_weight (p, nid); +if (weight > max_weight) { + max_weight = weight; + max_nid = nid; + } } } + +spin_unlock (group_lock); }/* Preferred node as the node with the most faults */
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 51/63] sched: numa: Prevent parallel updates to group stats during placement
Quoted 7 lines · Mel Gorman
Having multiple tasks in a group go through
task_numa_placementsimultaneously can lead to a task picking a wrong node to run on, because the group stats may be in the middle of an update. This patch avoids parallel updates by holding thenuma_grouplock during placement decisions.Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] sched/numa: Prevent parallel updates to group stats during placement
In reply to Mel Gormansched/numa: Prevent parallel updates to group stats during placement
Commit-ID: 7dbd13ed06513b047216a7ffc718bad9df0660f1 Gitweb: http://git.kernel.org/tip/7dbd13ed06513b047216a7ffc718bad9df0660f1 Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:29 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:02 +0200
sched/numa: Prevent parallel updates to group stats during placement
Having multiple tasks in a group go through task_numa_placement simultaneously can lead to a task picking a wrong node to run on, because the group stats may be in the middle of an update. This patch avoids parallel updates by holding the numa_group lock during placement decisions.
--- kernel/sched/fair.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-)
kernel/sched/fair.c +23 -12
@@ -1233,6 +1233,7 @@ static void task_numa_placement(struct task_struct *p) {int seq, nid, max_nid =-1 , max_group_nid =-1 ;unsigned long max_faults =0 , max_group_faults =0 ; +spinlock_t *group_lock =NULL ; seq =ACCESS_ONCE (p->mm->numa_scan_seq);if (p->numa_scan_seq == seq)
@@ -1241,6 +1242,12 @@ static void task_numa_placement(struct task_struct *p) p->numa_migrate_seq++; p->numa_scan_period_max =task_scan_max (p); +/* If the task is part of a group prevent parallel updates to group stats */ +if (p->numa_group) { + group_lock = &p->numa_group->lock; +spin_lock (group_lock); + } +/* Find the node with the highest number of faults */ for_each_online_node (nid) {unsigned long faults =0 , group_faults =0 ;
@@ -1279,20 +1286,24 @@ static void task_numa_placement(struct task_struct *p) } } -/* -* If the preferred task and group nids are different, -* iterate over the nodes again to find the best place. -*/ -if (p->numa_group && max_nid != max_group_nid) { -unsigned long weight, max_weight =0 ; - -for_each_online_node (nid) { - weight =task_weight (p, nid) +group_weight (p, nid); -if (weight > max_weight) { - max_weight = weight; - max_nid = nid; +if (p->numa_group) { +/* +* If the preferred task and group nids are different, +* iterate over the nodes again to find the best place. +*/ +if (max_nid != max_group_nid) { +unsigned long weight, max_weight =0 ; + +for_each_online_node (nid) { + weight =task_weight (p, nid) +group_weight (p, nid); +if (weight > max_weight) { + max_weight = weight; + max_nid = nid; + } } } + +spin_unlock (group_lock); }/* Preferred node as the node with the most faults */
Mel Gorman
reviewerPATCH 52/63 sched: numa: add debugging
In reply to Mel GormanFrom: Ingo Molnar <[email protected]>
--- include/linux/sched.h | 6 ++++++ kernel/sched/debug.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++-- kernel/sched/fair.c | 5 ++++- 3 files changed, 68 insertions(+), 3 deletions(-)
include/linux/sched.h +6 -0
@@ -1356,6 +1356,7 @@ struct task_struct {unsigned long *numa_faults_buffer;int numa_preferred_nid; +unsigned long numa_pages_migrated;#endif /* CONFIG_NUMA_BALANCING */ struct rcu_head rcu;
@@ -2587,6 +2588,11 @@ static inline unsigned int task_cpu(const struct task_struct *p) return task_thread_info(p)->cpu; } +static inline int task_node (const struct task_struct *p) +{ +return cpu_to_node (task_cpu (p)); +} +extern void set_task_cpu (struct task_struct *p,unsigned int cpu);#else
kernel/sched/debug.c +58 -2
96 lines not on this page · raw message
kernel/sched/fair.c +4 -1
@@ -1137,7 +1137,7 @@ static int task_numa_migrate(struct task_struct *p) .p = p, .src_cpu = task_cpu(p), - .src_nid = cpu_to_node(task_cpu(p)), + .src_nid = task_node(p), .imbalance_pct = 112,
@@ -1515,6 +1515,9 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags)if (p->numa_migrate_retry &&time_after (jiffies, p->numa_migrate_retry))numa_migrate_preferred (p); +if (migrated) + p->numa_pages_migrated += pages; + p->numa_faults_buffer[task_faults_idx (node, priv)] += pages; }
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 52/63] sched: numa: add debugging
Quoted 5 lines · Mel Gorman
From: Ingo Molnar <[email protected]>
Signed-off-by Ingo Molnar <[email protected]>Signed-off-by Peter Zijlstra <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Ingo Molnar
merge bot[tip:sched/core] sched/numa: Add debugging
In reply to Mel Gormansched/numa: Add debugging
Commit-ID: b32e86b4301e345611f0446265f782a229faadf6 Gitweb: http://git.kernel.org/tip/b32e86b4301e345611f0446265f782a229faadf6 Author: Ingo Molnar <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:30 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:04 +0200
sched/numa: Add debugging
--- include/linux/sched.h | 6 ++++++ kernel/sched/debug.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++-- kernel/sched/fair.c | 5 ++++- 3 files changed, 68 insertions(+), 3 deletions(-)
include/linux/sched.h +6 -0
@@ -1366,6 +1366,7 @@ struct task_struct {unsigned long *numa_faults_buffer;int numa_preferred_nid; +unsigned long numa_pages_migrated;#endif /* CONFIG_NUMA_BALANCING */ struct rcu_head rcu;
@@ -2661,6 +2662,11 @@ static inline unsigned int task_cpu(const struct task_struct *p) return task_thread_info(p)->cpu; } +static inline int task_node (const struct task_struct *p) +{ +return cpu_to_node (task_cpu (p)); +} +extern void set_task_cpu (struct task_struct *p,unsigned int cpu);#else
kernel/sched/debug.c +58 -2
96 lines not on this page · raw message
kernel/sched/fair.c +4 -1
@@ -1137,7 +1137,7 @@ static int task_numa_migrate(struct task_struct *p) .p = p, .src_cpu = task_cpu(p), - .src_nid = cpu_to_node(task_cpu(p)), + .src_nid = task_node(p), .imbalance_pct = 112,
@@ -1515,6 +1515,9 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags)if (p->numa_migrate_retry &&time_after (jiffies, p->numa_migrate_retry))numa_migrate_preferred (p); +if (migrated) + p->numa_pages_migrated += pages; + p->numa_faults_buffer[task_faults_idx (node, priv)] += pages; }
Mel Gorman
reviewerPATCH 53/63 sched: numa: Decide whether to favour task or group weights based on swap candidate relationships
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
This patch separately considers task and group affinities when searching for swap candidates during task NUMA placement. If tasks are not part of a group or the same group then the task weights are considered. Otherwise the group weights are compared.
--- kernel/sched/fair.c | 59 ++++++++++++++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 23 deletions(-)
kernel/sched/fair.c +36 -23
@@ -1039,13 +1039,15 @@ static void task_numa_assign(struct task_numa_env *env,* into account that it might be best if task running on the dst_cpu should * be exchanged with the source task */ -static void task_numa_compare (struct task_numa_env *env,long imp) +static void task_numa_compare (struct task_numa_env *env, +long taskimp,long groupimp) {struct rq *src_rq =cpu_rq (env->src_cpu);struct rq *dst_rq =cpu_rq (env->dst_cpu);struct task_struct *cur;long dst_load, src_load;long load; +long imp = (groupimp >0 ) ? groupimp : taskimp;rcu_read_lock (); cur =ACCESS_ONCE (dst_rq->curr);
@@ -1064,10 +1066,19 @@ static void task_numa_compare(struct task_numa_env *env, long imp)if (!cpumask_test_cpu (env->src_cpu,tsk_cpus_allowed (cur))) goto unlock; - imp +=task_weight (cur, env->src_nid) + -group_weight (cur, env->src_nid) - -task_weight (cur, env->dst_nid) - -group_weight (cur, env->dst_nid); +/* +* If dst and source tasks are in the same NUMA group, or not +* in any group then look only at task weights otherwise give +* priority to the group weights. +*/ +if (!cur->numa_group || !env->p->numa_group || + cur->numa_group == env->p->numa_group) { + imp = taskimp +task_weight (cur, env->src_nid) - +task_weight (cur, env->dst_nid); + }else { + imp = groupimp +group_weight (cur, env->src_nid) - +group_weight (cur, env->dst_nid); + } }if (imp < env->best_imp)
@@ -1117,7 +1128,8 @@ unlock:rcu_read_unlock (); } -static void task_numa_find_cpu (struct task_numa_env *env,long imp) +static void task_numa_find_cpu (struct task_numa_env *env, +long taskimp,long groupimp) {int cpu;
@@ -1127,7 +1139,7 @@ static void task_numa_find_cpu(struct task_numa_env *env, long imp)continue ; env->dst_cpu = cpu; -task_numa_compare (env, imp); +task_numa_compare (env, taskimp, groupimp); } }
@@ -1146,9 +1158,9 @@ static int task_numa_migrate(struct task_struct *p) .best_cpu = -1 };struct sched_domain *sd; -unsigned long weight; +unsigned long taskweight, groupweight;int nid, ret; -long imp; +long taskimp, groupimp;/* * Pick the lowest SD_NUMA domain, as that would have the smallest
@@ -1163,15 +1175,17 @@ static int task_numa_migrate(struct task_struct *p) env.imbalance_pct =100 + (sd->imbalance_pct -100 ) /2 ;rcu_read_unlock (); - weight =task_weight (p, env.src_nid) +group_weight (p, env.src_nid); + taskweight =task_weight (p, env.src_nid); + groupweight =group_weight (p, env.src_nid);update_numa_stats (&env.src_stats, env.src_nid); env.dst_nid = p->numa_preferred_nid; - imp =task_weight (p, env.dst_nid) +group_weight (p, env.dst_nid) - weight; + taskimp =task_weight (p, env.dst_nid) - taskweight; + groupimp =group_weight (p, env.dst_nid) - groupweight;update_numa_stats (&env.dst_stats, env.dst_nid);/* If the preferred nid has capacity, try to use it. */ if (env.dst_stats.has_capacity) -task_numa_find_cpu (&env, imp); +task_numa_find_cpu (&env, taskimp, groupimp);/* No space available on the preferred nid. Look elsewhere. */ if (env.best_cpu ==-1 ) {
@@ -1180,13 +1194,14 @@ static int task_numa_migrate(struct task_struct *p)continue ;/* Only consider nodes where both task and groups benefit */ - imp =task_weight (p, nid) +group_weight (p, nid) - weight; -if (imp <0 ) + taskimp =task_weight (p, nid) - taskweight; + groupimp =group_weight (p, nid) - groupweight; +if (taskimp <0 && groupimp <0 )continue ; env.dst_nid = nid;update_numa_stats (&env.dst_stats, env.dst_nid); -task_numa_find_cpu (&env, imp); +task_numa_find_cpu (&env, taskimp, groupimp); } }
@@ -4678,10 +4693,9 @@ static bool migrate_improves_locality(struct task_struct *p, struct lb_env *env)if (dst_nid == p->numa_preferred_nid)return true; -/* After the task has settled, check if the new node is better. */ -if (p->numa_migrate_seq >= sysctl_numa_balancing_settle_count && -task_weight (p, dst_nid) +group_weight (p, dst_nid) > -task_weight (p, src_nid) +group_weight (p, src_nid)) +/* If both task and group weight improve, this move is a winner. */ +if (task_weight (p, dst_nid) >task_weight (p, src_nid) && +group_weight (p, dst_nid) >group_weight (p, src_nid))return true;return false;
@@ -4708,10 +4722,9 @@ static bool migrate_degrades_locality(struct task_struct *p, struct lb_env *env)if (src_nid == p->numa_preferred_nid)return true; -/* After the task has settled, check if the new node is worse. */ -if (p->numa_migrate_seq >= sysctl_numa_balancing_settle_count && -task_weight (p, dst_nid) +group_weight (p, dst_nid) < -task_weight (p, src_nid) +group_weight (p, src_nid)) +/* If either task or group weight get worse, don't do it. */ +if (task_weight (p, dst_nid) <task_weight (p, src_nid) || +group_weight (p, dst_nid) <group_weight (p, src_nid))return true;return false;
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Decide whether to favour task or group weights based on swap candidate relationships
sched/numa: Decide whether to favour task or group weights based on swap candidate relationships
Commit-ID: 887c290e82e8950d854730c084904c115fc367ac Gitweb: http://git.kernel.org/tip/887c290e82e8950d854730c084904c115fc367ac Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:31 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:06 +0200
sched/numa: Decide whether to favour task or group weights based on swap candidate relationships
This patch separately considers task and group affinities when searching for swap candidates during task NUMA placement. If tasks are not part of a group or the same group then the task weights are considered. Otherwise the group weights are compared.
--- kernel/sched/fair.c | 59 ++++++++++++++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 23 deletions(-)
kernel/sched/fair.c +36 -23
@@ -1039,13 +1039,15 @@ static void task_numa_assign(struct task_numa_env *env,* into account that it might be best if task running on the dst_cpu should * be exchanged with the source task */ -static void task_numa_compare (struct task_numa_env *env,long imp) +static void task_numa_compare (struct task_numa_env *env, +long taskimp,long groupimp) {struct rq *src_rq =cpu_rq (env->src_cpu);struct rq *dst_rq =cpu_rq (env->dst_cpu);struct task_struct *cur;long dst_load, src_load;long load; +long imp = (groupimp >0 ) ? groupimp : taskimp;rcu_read_lock (); cur =ACCESS_ONCE (dst_rq->curr);
@@ -1064,10 +1066,19 @@ static void task_numa_compare(struct task_numa_env *env, long imp)if (!cpumask_test_cpu (env->src_cpu,tsk_cpus_allowed (cur))) goto unlock; - imp +=task_weight (cur, env->src_nid) + -group_weight (cur, env->src_nid) - -task_weight (cur, env->dst_nid) - -group_weight (cur, env->dst_nid); +/* +* If dst and source tasks are in the same NUMA group, or not +* in any group then look only at task weights otherwise give +* priority to the group weights. +*/ +if (!cur->numa_group || !env->p->numa_group || + cur->numa_group == env->p->numa_group) { + imp = taskimp +task_weight (cur, env->src_nid) - +task_weight (cur, env->dst_nid); + }else { + imp = groupimp +group_weight (cur, env->src_nid) - +group_weight (cur, env->dst_nid); + } }if (imp < env->best_imp)
@@ -1117,7 +1128,8 @@ unlock:rcu_read_unlock (); } -static void task_numa_find_cpu (struct task_numa_env *env,long imp) +static void task_numa_find_cpu (struct task_numa_env *env, +long taskimp,long groupimp) {int cpu;
@@ -1127,7 +1139,7 @@ static void task_numa_find_cpu(struct task_numa_env *env, long imp)continue ; env->dst_cpu = cpu; -task_numa_compare (env, imp); +task_numa_compare (env, taskimp, groupimp); } }
@@ -1146,9 +1158,9 @@ static int task_numa_migrate(struct task_struct *p) .best_cpu = -1 };struct sched_domain *sd; -unsigned long weight; +unsigned long taskweight, groupweight;int nid, ret; -long imp; +long taskimp, groupimp;/* * Pick the lowest SD_NUMA domain, as that would have the smallest
@@ -1163,15 +1175,17 @@ static int task_numa_migrate(struct task_struct *p) env.imbalance_pct =100 + (sd->imbalance_pct -100 ) /2 ;rcu_read_unlock (); - weight =task_weight (p, env.src_nid) +group_weight (p, env.src_nid); + taskweight =task_weight (p, env.src_nid); + groupweight =group_weight (p, env.src_nid);update_numa_stats (&env.src_stats, env.src_nid); env.dst_nid = p->numa_preferred_nid; - imp =task_weight (p, env.dst_nid) +group_weight (p, env.dst_nid) - weight; + taskimp =task_weight (p, env.dst_nid) - taskweight; + groupimp =group_weight (p, env.dst_nid) - groupweight;update_numa_stats (&env.dst_stats, env.dst_nid);/* If the preferred nid has capacity, try to use it. */ if (env.dst_stats.has_capacity) -task_numa_find_cpu (&env, imp); +task_numa_find_cpu (&env, taskimp, groupimp);/* No space available on the preferred nid. Look elsewhere. */ if (env.best_cpu ==-1 ) {
@@ -1180,13 +1194,14 @@ static int task_numa_migrate(struct task_struct *p)continue ;/* Only consider nodes where both task and groups benefit */ - imp =task_weight (p, nid) +group_weight (p, nid) - weight; -if (imp <0 ) + taskimp =task_weight (p, nid) - taskweight; + groupimp =group_weight (p, nid) - groupweight; +if (taskimp <0 && groupimp <0 )continue ; env.dst_nid = nid;update_numa_stats (&env.dst_stats, env.dst_nid); -task_numa_find_cpu (&env, imp); +task_numa_find_cpu (&env, taskimp, groupimp); } }
@@ -4679,10 +4694,9 @@ static bool migrate_improves_locality(struct task_struct *p, struct lb_env *env)if (dst_nid == p->numa_preferred_nid)return true; -/* After the task has settled, check if the new node is better. */ -if (p->numa_migrate_seq >= sysctl_numa_balancing_settle_count && -task_weight (p, dst_nid) +group_weight (p, dst_nid) > -task_weight (p, src_nid) +group_weight (p, src_nid)) +/* If both task and group weight improve, this move is a winner. */ +if (task_weight (p, dst_nid) >task_weight (p, src_nid) && +group_weight (p, dst_nid) >group_weight (p, src_nid))return true;return false;
@@ -4709,10 +4723,9 @@ static bool migrate_degrades_locality(struct task_struct *p, struct lb_env *env)if (src_nid == p->numa_preferred_nid)return true; -/* After the task has settled, check if the new node is worse. */ -if (p->numa_migrate_seq >= sysctl_numa_balancing_settle_count && -task_weight (p, dst_nid) +group_weight (p, dst_nid) < -task_weight (p, src_nid) +group_weight (p, src_nid)) +/* If either task or group weight get worse, don't do it. */ +if (task_weight (p, dst_nid) <task_weight (p, src_nid) || +group_weight (p, dst_nid) <group_weight (p, src_nid))return true;return false;
Mel Gorman
reviewerPATCH 54/63 sched: numa: fix task or group comparison
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
This patch separately considers task and group affinities when searching for swap candidates during NUMA placement. If tasks are part of the same group, or no group at all, the task weights are considered.
Some hysteresis is added to prevent tasks within one group from getting bounced between NUMA nodes due to tiny differences.
If tasks are part of different groups, the code compares group weights, in order to favor grouping task groups together.
The patch also changes the group weight multiplier to be the same as the task weight multiplier, since the two are no longer added up like before.
--- kernel/sched/fair.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)
kernel/sched/fair.c +25 -7
@@ -962,7 +962,7 @@ static inline unsigned long group_weight(struct task_struct *p, int nid)if (!total_faults)return 0 ; -return 1200 *group_faults (p, nid) / total_faults; +return 1000 *group_faults (p, nid) / total_faults; }static unsigned long weighted_cpuload (const int cpu);
@@ -1068,16 +1068,34 @@ static void task_numa_compare(struct task_numa_env *env,/* * If dst and source tasks are in the same NUMA group, or not -* in any group then look only at task weights otherwise give -* priority to the group weights. +* in any group then look only at task weights. */ -if (!cur->numa_group || !env->p->numa_group || - cur->numa_group == env->p->numa_group) { +if (cur->numa_group == env->p->numa_group) { imp = taskimp +task_weight (cur, env->src_nid) -task_weight (cur, env->dst_nid); +/* +* Add some hysteresis to prevent swapping the +* tasks within a group over tiny differences. +*/ +if (cur->numa_group) + imp -= imp/16 ; }else { - imp = groupimp +group_weight (cur, env->src_nid) - -group_weight (cur, env->dst_nid); +/* +* Compare the group weights. If a task is all by +* itself (not part of a group), use the task weight +* instead. +*/ +if (env->p->numa_group) + imp = groupimp; +else + imp = taskimp; + +if (cur->numa_group) + imp +=group_weight (cur, env->src_nid) - +group_weight (cur, env->dst_nid); +else + imp +=task_weight (cur, env->src_nid) - +task_weight (cur, env->dst_nid); } }
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Fix task or group comparison
sched/numa: Fix task or group comparison
Commit-ID: ca28aa53dd95868c9e38917b9881c09dacfacf1a Gitweb: http://git.kernel.org/tip/ca28aa53dd95868c9e38917b9881c09dacfacf1a Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:32 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:08 +0200
sched/numa: Fix task or group comparison
This patch separately considers task and group affinities when searching for swap candidates during NUMA placement. If tasks are part of the same group, or no group at all, the task weights are considered.
Some hysteresis is added to prevent tasks within one group from getting bounced between NUMA nodes due to tiny differences.
If tasks are part of different groups, the code compares group weights, in order to favor grouping task groups together.
The patch also changes the group weight multiplier to be the same as the task weight multiplier, since the two are no longer added up like before.
--- kernel/sched/fair.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)
kernel/sched/fair.c +25 -7
@@ -962,7 +962,7 @@ static inline unsigned long group_weight(struct task_struct *p, int nid)if (!total_faults)return 0 ; -return 1200 *group_faults (p, nid) / total_faults; +return 1000 *group_faults (p, nid) / total_faults; }static unsigned long weighted_cpuload (const int cpu);
@@ -1068,16 +1068,34 @@ static void task_numa_compare(struct task_numa_env *env,/* * If dst and source tasks are in the same NUMA group, or not -* in any group then look only at task weights otherwise give -* priority to the group weights. +* in any group then look only at task weights. */ -if (!cur->numa_group || !env->p->numa_group || - cur->numa_group == env->p->numa_group) { +if (cur->numa_group == env->p->numa_group) { imp = taskimp +task_weight (cur, env->src_nid) -task_weight (cur, env->dst_nid); +/* +* Add some hysteresis to prevent swapping the +* tasks within a group over tiny differences. +*/ +if (cur->numa_group) + imp -= imp/16 ; }else { - imp = groupimp +group_weight (cur, env->src_nid) - -group_weight (cur, env->dst_nid); +/* +* Compare the group weights. If a task is all by +* itself (not part of a group), use the task weight +* instead. +*/ +if (env->p->numa_group) + imp = groupimp; +else + imp = taskimp; + +if (cur->numa_group) + imp +=group_weight (cur, env->src_nid) - +group_weight (cur, env->dst_nid); +else + imp +=task_weight (cur, env->src_nid) - +task_weight (cur, env->dst_nid); } }
Mel Gorman
reviewerPATCH 55/63 sched: numa: Avoid migrating tasks that are placed on their preferred node
In reply to Mel GormanFrom: Peter Zijlstra <[email protected]>
This patch classifies scheduler domains and runqueues into types depending the number of tasks that are about their NUMA placement and the number that are currently running on their preferred node. The types are
regular: There are tasks running that do not care about their NUMA
placement.
remote: There are tasks running that care about their placement but are
currently running on a node remote to their ideal placement
all: No distinction
To implement this the patch tracks the number of tasks that are optimally NUMA placed (rq->nr_preferred_running) and the number of tasks running that care about their placement (nr_numa_running). The load balancer uses this information to avoid migrating idea placed NUMA tasks as long as better options for load balancing exists. For example, it will not consider balancing between a group whose tasks are all perfectly placed and a group with remote tasks.
--- kernel/sched/core.c | 29 +++++++++++++ kernel/sched/fair.c | 120 +++++++++++++++++++++++++++++++++++++++++++++------ kernel/sched/sched.h | 5 +++ 3 files changed, 142 insertions(+), 12 deletions(-)
kernel/sched/core.c +29 -0
@@ -4473,6 +4473,35 @@ int migrate_task_to(struct task_struct *p, int target_cpu) return stop_one_cpu(curr_cpu, migration_cpu_stop, &arg); } + +/* +* Requeue a task on a given node and accurately track the number of NUMA +* tasks on the runqueues +*/ +void sched_setnuma (struct task_struct *p,int nid) +{ +struct rq *rq; +unsigned long flags; +bool on_rq, running; + + rq =task_rq_lock (p, &flags); + on_rq = p->on_rq; + running =task_current (rq, p); + +if (on_rq) +dequeue_task (rq, p,0 ); +if (running) + p->sched_class->put_prev_task (rq, p); + + p->numa_preferred_nid = nid; + p->numa_migrate_seq =1 ; + +if (running) + p->sched_class->set_curr_task (rq); +if (on_rq) +enqueue_task (rq, p,0 ); +task_rq_unlock (rq, p, &flags); +}#endif /*
kernel/sched/fair.c +108 -12
215 lines not on this page · raw message
kernel/sched/sched.h +5 -0
@@ -409,6 +409,10 @@ struct rq {* remote CPUs use both these fields when doing load calculation. */ unsigned int nr_running; +#ifdef CONFIG_NUMA_BALANCING +unsigned int nr_numa_running; +unsigned int nr_preferred_running; +#endif #define CPU_LOAD_IDX_MAX 5unsigned long cpu_load[CPU_LOAD_IDX_MAX ];unsigned long last_load_update_tick;
@@ -554,6 +558,7 @@ static inline u64 rq_clock_task(struct rq *rq) }#ifdef CONFIG_NUMA_BALANCING +extern void sched_setnuma (struct task_struct *p,int node);extern int migrate_task_to (struct task_struct *p,int cpu);extern int migrate_swap (struct task_struct *,struct task_struct *);#endif /* CONFIG_NUMA_BALANCING */
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 55/63] sched: numa: Avoid migrating tasks that are placed on their preferred node
Quoted 22 lines · Mel Gorman
From: Peter Zijlstra <[email protected]>
This patch classifies scheduler domains and runqueues into types depending the number of tasks that are about their NUMA placement and the number that are currently running on their preferred node. The types are
regular: There are tasks running that do not care about their NUMA
placement.remote: There are tasks running that care about their placement but are
currently running on a node remote to their ideal placementall: No distinction
To implement this the patch tracks the number of tasks that are optimally NUMA placed (
rq->nr_preferred_running) and the number of tasks running that care about their placement (nr_numa_running). The load balancer uses this information to avoid migrating idea placed NUMA tasks as long as better options for load balancing exists. For example, it will not consider balancing between a group whose tasks are all perfectly placed and a group with remote tasks.
Quoted 2 lines
Signed-off-by Peter Zijlstra <[email protected]>Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Peter Zijlstra
merge bot[tip:sched/core] sched/numa: Avoid migrating tasks that are placed on their preferred node
In reply to Mel Gormansched/numa: Avoid migrating tasks that are placed on their preferred node
Commit-ID: 0ec8aa00f2b4dc457836ef4e2662b02483e94fb7 Gitweb: http://git.kernel.org/tip/0ec8aa00f2b4dc457836ef4e2662b02483e94fb7 Author: Peter Zijlstra <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:33 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:10 +0200
sched/numa: Avoid migrating tasks that are placed on their preferred node
This patch classifies scheduler domains and runqueues into types depending the number of tasks that are about their NUMA placement and the number that are currently running on their preferred node. The types are
regular: There are tasks running that do not care about their NUMA
placement.
remote: There are tasks running that care about their placement but are
currently running on a node remote to their ideal placement
all: No distinction
To implement this the patch tracks the number of tasks that are optimally NUMA placed (rq->nr_preferred_running) and the number of tasks running that care about their placement (nr_numa_running). The load balancer uses this information to avoid migrating idea placed NUMA tasks as long as better options for load balancing exists. For example, it will not consider balancing between a group whose tasks are all perfectly placed and a group with remote tasks.
--- kernel/sched/core.c | 29 +++++++++++++ kernel/sched/fair.c | 120 +++++++++++++++++++++++++++++++++++++++++++++------ kernel/sched/sched.h | 5 +++ 3 files changed, 142 insertions(+), 12 deletions(-)
kernel/sched/core.c +29 -0
@@ -4468,6 +4468,35 @@ int migrate_task_to(struct task_struct *p, int target_cpu) return stop_one_cpu(curr_cpu, migration_cpu_stop, &arg); } + +/* +* Requeue a task on a given node and accurately track the number of NUMA +* tasks on the runqueues +*/ +void sched_setnuma (struct task_struct *p,int nid) +{ +struct rq *rq; +unsigned long flags; +bool on_rq, running; + + rq =task_rq_lock (p, &flags); + on_rq = p->on_rq; + running =task_current (rq, p); + +if (on_rq) +dequeue_task (rq, p,0 ); +if (running) + p->sched_class->put_prev_task (rq, p); + + p->numa_preferred_nid = nid; + p->numa_migrate_seq =1 ; + +if (running) + p->sched_class->set_curr_task (rq); +if (on_rq) +enqueue_task (rq, p,0 ); +task_rq_unlock (rq, p, &flags); +}#endif /*
kernel/sched/fair.c +108 -12
215 lines not on this page · raw message
kernel/sched/sched.h +5 -0
@@ -409,6 +409,10 @@ struct rq {* remote CPUs use both these fields when doing load calculation. */ unsigned int nr_running; +#ifdef CONFIG_NUMA_BALANCING +unsigned int nr_numa_running; +unsigned int nr_preferred_running; +#endif #define CPU_LOAD_IDX_MAX 5unsigned long cpu_load[CPU_LOAD_IDX_MAX ];unsigned long last_load_update_tick;
@@ -557,6 +561,7 @@ static inline u64 rq_clock_task(struct rq *rq) }#ifdef CONFIG_NUMA_BALANCING +extern void sched_setnuma (struct task_struct *p,int node);extern int migrate_task_to (struct task_struct *p,int cpu);extern int migrate_swap (struct task_struct *,struct task_struct *);#endif /* CONFIG_NUMA_BALANCING */
Mel Gorman
reviewerPATCH 56/63 sched: numa: be more careful about joining numa groups
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
Due to the way the pid is truncated, and tasks are moved between CPUs by the scheduler, it is possible for the current task_numa_fault to group together tasks that do not actually share memory together.
This patch adds a few easy sanity checks to task_numa_fault, joining tasks together if they share the same tsk->mm, or if the fault was on a page with an elevated mapcount, in a shared VMA.
--- include/linux/sched.h | 1 + kernel/sched/fair.c | 16 +++++++++++----- mm/memory.c | 7 +++++++ 3 files changed, 19 insertions(+), 5 deletions(-)
include/linux/sched.h +1 -0
@@ -1444,6 +1444,7 @@ struct task_struct {#define TNF_MIGRATED 0x01#define TNF_NO_GROUP 0x02 +#define TNF_SHARED 0x04#ifdef CONFIG_NUMA_BALANCING extern void task_numa_fault (int last_node,int node,int pages,int flags);
kernel/sched/fair.c +11 -5
@@ -1381,7 +1381,7 @@ static void double_lock(spinlock_t *l1, spinlock_t *l2)spin_lock_nested (l2,SINGLE_DEPTH_NESTING ); } -static void task_numa_group (struct task_struct *p,int cpupid) +static void task_numa_group (struct task_struct *p,int cpupid,int flags) {struct numa_group *grp, *my_grp;struct task_struct *tsk;
@@ -1439,10 +1439,16 @@ static void task_numa_group(struct task_struct *p, int cpupid)if (my_grp->nr_tasks == grp->nr_tasks && my_grp > grp) goto unlock; -if (!get_numa_group (grp)) - goto unlock; +/* Always join threads in the same process. */ +if (tsk->mm == current->mm) + join = true; + +/* Simple filter to avoid false positives due to PID collisions */ +if (flags &TNF_SHARED ) + join = true; - join = true; +if (join && !get_numa_group (grp)) + join = false; unlock:rcu_read_unlock ();
@@ -1539,7 +1545,7 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags) }else { priv =cpupid_match_pid (p, last_cpupid);if (!priv && !(flags &TNF_NO_GROUP )) -task_numa_group (p, last_cpupid); +task_numa_group (p, last_cpupid, flags); }/*
mm/memory.c +7 -0
@@ -3584,6 +3584,13 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,if (!pte_write (pte)) flags |=TNF_NO_GROUP ; +/* +* Flag if the page is shared between multiple address spaces. This +* is later used when determining whether to group tasks together +*/ +if (page_mapcount (page) >1 && (vma->vm_flags &VM_SHARED )) + flags |=TNF_SHARED ; + last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); target_nid =numa_migrate_prep (page, vma, addr, page_nid);
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Be more careful about joining numa groups
sched/numa: Be more careful about joining numa groups
Commit-ID: dabe1d992414a6456e60e41f1d1ad8affc6d444d Gitweb: http://git.kernel.org/tip/dabe1d992414a6456e60e41f1d1ad8affc6d444d Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:34 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:12 +0200
sched/numa: Be more careful about joining numa groups
Due to the way the pid is truncated, and tasks are moved between CPUs by the scheduler, it is possible for the current task_numa_fault to group together tasks that do not actually share memory together.
This patch adds a few easy sanity checks to task_numa_fault, joining tasks together if they share the same tsk->mm, or if the fault was on a page with an elevated mapcount, in a shared VMA.
--- include/linux/sched.h | 1 + kernel/sched/fair.c | 16 +++++++++++----- mm/memory.c | 7 +++++++ 3 files changed, 19 insertions(+), 5 deletions(-)
include/linux/sched.h +1 -0
@@ -1454,6 +1454,7 @@ struct task_struct {#define TNF_MIGRATED 0x01#define TNF_NO_GROUP 0x02 +#define TNF_SHARED 0x04#ifdef CONFIG_NUMA_BALANCING extern void task_numa_fault (int last_node,int node,int pages,int flags);
kernel/sched/fair.c +11 -5
@@ -1381,7 +1381,7 @@ static void double_lock(spinlock_t *l1, spinlock_t *l2)spin_lock_nested (l2,SINGLE_DEPTH_NESTING ); } -static void task_numa_group (struct task_struct *p,int cpupid) +static void task_numa_group (struct task_struct *p,int cpupid,int flags) {struct numa_group *grp, *my_grp;struct task_struct *tsk;
@@ -1439,10 +1439,16 @@ static void task_numa_group(struct task_struct *p, int cpupid)if (my_grp->nr_tasks == grp->nr_tasks && my_grp > grp) goto unlock; -if (!get_numa_group (grp)) - goto unlock; +/* Always join threads in the same process. */ +if (tsk->mm == current->mm) + join = true; + +/* Simple filter to avoid false positives due to PID collisions */ +if (flags &TNF_SHARED ) + join = true; - join = true; +if (join && !get_numa_group (grp)) + join = false; unlock:rcu_read_unlock ();
@@ -1539,7 +1545,7 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags) }else { priv =cpupid_match_pid (p, last_cpupid);if (!priv && !(flags &TNF_NO_GROUP )) -task_numa_group (p, last_cpupid); +task_numa_group (p, last_cpupid, flags); }/*
mm/memory.c +7 -0
@@ -3584,6 +3584,13 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma,if (!pte_write (pte)) flags |=TNF_NO_GROUP ; +/* +* Flag if the page is shared between multiple address spaces. This +* is later used when determining whether to group tasks together +*/ +if (page_mapcount (page) >1 && (vma->vm_flags &VM_SHARED )) + flags |=TNF_SHARED ; + last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); target_nid =numa_migrate_prep (page, vma, addr, page_nid);
Mel Gorman
reviewerPATCH 57/63 sched: numa: Take false sharing into account when adapting scan rate
In reply to Mel GormanScan rate is altered based on whether shared/private faults dominated. task_numa_group() may detect false sharing but that information is not taken into account when adapting the scan rate. Take it into account.
--- kernel/sched/fair.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
kernel/sched/fair.c +6 -2
@@ -1381,7 +1381,8 @@ static void double_lock(spinlock_t *l1, spinlock_t *l2)spin_lock_nested (l2,SINGLE_DEPTH_NESTING ); } -static void task_numa_group (struct task_struct *p,int cpupid,int flags) +static void task_numa_group (struct task_struct *p,int cpupid,int flags, +int *priv) {struct numa_group *grp, *my_grp;struct task_struct *tsk;
@@ -1447,6 +1448,9 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags)if (flags &TNF_SHARED ) join = true; +/* Update priv based on whether false sharing was detected */ + *priv = !join; +if (join && !get_numa_group (grp)) join = false;
@@ -1545,7 +1549,7 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags) }else { priv =cpupid_match_pid (p, last_cpupid);if (!priv && !(flags &TNF_NO_GROUP )) -task_numa_group (p, last_cpupid, flags); +task_numa_group (p, last_cpupid, flags, &priv); }/*
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 57/63] sched: numa: Take false sharing into account when adapting scan rate
Quoted 5 lines · Mel Gorman
Scan rate is altered based on whether shared/private faults dominated.
task_numa_group()may detect false sharing but that information is not taken into account when adapting the scan rate. Take it into account.Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] sched/numa: Take false sharing into account when adapting scan rate
In reply to Mel Gormansched/numa: Take false sharing into account when adapting scan rate
Commit-ID: 3e6a9418cf05638b103e34f5d13be0321872e623 Gitweb: http://git.kernel.org/tip/3e6a9418cf05638b103e34f5d13be0321872e623 Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:35 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:14 +0200
sched/numa: Take false sharing into account when adapting scan rate
Scan rate is altered based on whether shared/private faults dominated. task_numa_group() may detect false sharing but that information is not taken into account when adapting the scan rate. Take it into account.
--- kernel/sched/fair.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
kernel/sched/fair.c +6 -2
@@ -1381,7 +1381,8 @@ static void double_lock(spinlock_t *l1, spinlock_t *l2)spin_lock_nested (l2,SINGLE_DEPTH_NESTING ); } -static void task_numa_group (struct task_struct *p,int cpupid,int flags) +static void task_numa_group (struct task_struct *p,int cpupid,int flags, +int *priv) {struct numa_group *grp, *my_grp;struct task_struct *tsk;
@@ -1447,6 +1448,9 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags)if (flags &TNF_SHARED ) join = true; +/* Update priv based on whether false sharing was detected */ + *priv = !join; +if (join && !get_numa_group (grp)) join = false;
@@ -1545,7 +1549,7 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags) }else { priv =cpupid_match_pid (p, last_cpupid);if (!priv && !(flags &TNF_NO_GROUP )) -task_numa_group (p, last_cpupid, flags); +task_numa_group (p, last_cpupid, flags, &priv); }/*
Mel Gorman
reviewerPATCH 58/63 sched: numa: adjust scan rate in task_numa_placement
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
Adjust numa_scan_period in task_numa_placement, depending on how much useful work the numa code can do. The more local faults there are in a given scan window the longer the period (and hence the slower the scan rate) during the next window. If there are excessive shared faults then the scan period will decrease with the amount of scaling depending on whether the ratio of shared/private faults. If the preferred node changes then the scan rate is reset to recheck if the task is properly placed.
--- include/linux/sched.h | 9 ++++ kernel/sched/fair.c | 112 +++++++++++++++++++++++++++++++++++++++----------- mm/huge_memory.c | 4 +- mm/memory.c | 9 ++-- 4 files changed, 105 insertions(+), 29 deletions(-)
include/linux/sched.h +9 -0
@@ -1355,6 +1355,14 @@ struct task_struct {*/ unsigned long *numa_faults_buffer; +/* +* numa_faults_locality tracks if faults recorded during the last +* scan window were remote/local. The task scan period is adapted +* based on the locality of the faults with different weights +* depending on whether they were shared or private faults +*/ +unsigned long numa_faults_locality[2 ]; +int numa_preferred_nid;unsigned long numa_pages_migrated;#endif /* CONFIG_NUMA_BALANCING */
@@ -1445,6 +1453,7 @@ struct task_struct {#define TNF_MIGRATED 0x01#define TNF_NO_GROUP 0x02#define TNF_SHARED 0x04 +#define TNF_FAULT_LOCAL 0x08#ifdef CONFIG_NUMA_BALANCING extern void task_numa_fault (int last_node,int node,int pages,int flags);
kernel/sched/fair.c +87 -25
164 lines not on this page · raw message
mm/huge_memory.c +3 -1
@@ -1296,8 +1296,10 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, page_nid =page_to_nid (page); last_cpupid =page_cpupid_last (page);count_vm_numa_event (NUMA_HINT_FAULTS ); -if (page_nid == this_nid) +if (page_nid == this_nid) {count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL ); + flags |=TNF_FAULT_LOCAL ; + }/* * Avoid grouping on DSO/COW pages in specific and RO pages
mm/memory.c +6 -3
@@ -3527,13 +3527,16 @@ static int do_nonlinear_fault(struct mm_struct *mm, struct vm_area_struct *vma, }int numa_migrate_prep (struct page *page,struct vm_area_struct *vma, -unsigned long addr,int page_nid) +unsigned long addr,int page_nid, +int *flags) {get_page (page);count_vm_numa_event (NUMA_HINT_FAULTS ); -if (page_nid ==numa_node_id ()) +if (page_nid ==numa_node_id ()) {count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL ); + *flags |=TNF_FAULT_LOCAL ; + }return mpol_misplaced (page, vma, addr); }
@@ -3593,7 +3596,7 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); - target_nid =numa_migrate_prep (page, vma, addr, page_nid); + target_nid =numa_migrate_prep (page, vma, addr, page_nid, &flags);pte_unmap_unlock (ptep, ptl);if (target_nid ==-1 ) {put_page (page);
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Adjust scan rate in task_numa_placement
sched/numa: Adjust scan rate in task_numa_placement
Commit-ID: 04bb2f9475054298f0c67a89ca92cade42d3fe5e Gitweb: http://git.kernel.org/tip/04bb2f9475054298f0c67a89ca92cade42d3fe5e Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:36 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:16 +0200
sched/numa: Adjust scan rate in task_numa_placement
Adjust numa_scan_period in task_numa_placement, depending on how much useful work the numa code can do. The more local faults there are in a given scan window the longer the period (and hence the slower the scan rate) during the next window. If there are excessive shared faults then the scan period will decrease with the amount of scaling depending on whether the ratio of shared/private faults. If the preferred node changes then the scan rate is reset to recheck if the task is properly placed.
--- include/linux/sched.h | 9 ++++ kernel/sched/fair.c | 112 +++++++++++++++++++++++++++++++++++++++----------- mm/huge_memory.c | 4 +- mm/memory.c | 9 ++-- 4 files changed, 105 insertions(+), 29 deletions(-)
include/linux/sched.h +9 -0
@@ -1365,6 +1365,14 @@ struct task_struct {*/ unsigned long *numa_faults_buffer; +/* +* numa_faults_locality tracks if faults recorded during the last +* scan window were remote/local. The task scan period is adapted +* based on the locality of the faults with different weights +* depending on whether they were shared or private faults +*/ +unsigned long numa_faults_locality[2 ]; +int numa_preferred_nid;unsigned long numa_pages_migrated;#endif /* CONFIG_NUMA_BALANCING */
@@ -1455,6 +1463,7 @@ struct task_struct {#define TNF_MIGRATED 0x01#define TNF_NO_GROUP 0x02#define TNF_SHARED 0x04 +#define TNF_FAULT_LOCAL 0x08#ifdef CONFIG_NUMA_BALANCING extern void task_numa_fault (int last_node,int node,int pages,int flags);
kernel/sched/fair.c +87 -25
164 lines not on this page · raw message
mm/huge_memory.c +3 -1
@@ -1296,8 +1296,10 @@ int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, page_nid =page_to_nid (page); last_cpupid =page_cpupid_last (page);count_vm_numa_event (NUMA_HINT_FAULTS ); -if (page_nid == this_nid) +if (page_nid == this_nid) {count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL ); + flags |=TNF_FAULT_LOCAL ; + }/* * Avoid grouping on DSO/COW pages in specific and RO pages
mm/memory.c +6 -3
@@ -3527,13 +3527,16 @@ static int do_nonlinear_fault(struct mm_struct *mm, struct vm_area_struct *vma, }int numa_migrate_prep (struct page *page,struct vm_area_struct *vma, -unsigned long addr,int page_nid) +unsigned long addr,int page_nid, +int *flags) {get_page (page);count_vm_numa_event (NUMA_HINT_FAULTS ); -if (page_nid ==numa_node_id ()) +if (page_nid ==numa_node_id ()) {count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL ); + *flags |=TNF_FAULT_LOCAL ; + }return mpol_misplaced (page, vma, addr); }
@@ -3593,7 +3596,7 @@ int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, last_cpupid =page_cpupid_last (page); page_nid =page_to_nid (page); - target_nid =numa_migrate_prep (page, vma, addr, page_nid); + target_nid =numa_migrate_prep (page, vma, addr, page_nid, &flags);pte_unmap_unlock (ptep, ptl);if (target_nid ==-1 ) {put_page (page);
Mel Gorman
reviewerPATCH 59/63 sched: numa: Remove the numa_balancing_scan_period_reset sysctl
In reply to Mel GormanWith scan rate adaptions based on whether the workload has properly converged or not there should be no need for the scan period reset hammer. Get rid of it.
--- Documentation/sysctl/kernel.txt | 11 +++-------- include/linux/mm_types.h | 3 --- include/linux/sched/sysctl.h | 1 - kernel/sched/core.c | 1 - kernel/sched/fair.c | 18 +----------------- kernel/sysctl.c | 7 ------- 6 files changed, 4 insertions(+), 37 deletions(-)
Documentation/sysctl/kernel.txt +3 -8
@@ -374,15 +374,13 @@ guarantee. If the target workload is already bound to NUMA nodes then this feature should be disabled. Otherwise, if the system overhead from the feature is too high then the rate the kernel samples for NUMA hinting faults may be controlled by the numa_balancing_scan_period_min_ms, -numa_balancing_scan_delay_ms, numa_balancing_scan_period_reset, -numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb and -numa_balancing_settle_count sysctls. +numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, +numa_balancing_scan_size_mb and numa_balancing_settle_count sysctls. ============================================================== numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, -numa_balancing_scan_period_max_ms, numa_balancing_scan_period_reset, -numa_balancing_scan_size_mb +numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb Automatic NUMA balancing scans tasks address space and unmaps pages to detect if pages are properly placed or if the data should be migrated to a
@@ -418,9 +416,6 @@ rate for each task. numa_balancing_scan_size_mb is how many megabytes worth of pages are scanned for a given scan. -numa_balancing_scan_period_reset is a blunt instrument that controls how -often a tasks scan delay is reset to detect sudden changes in task behaviour. - numa_balancing_settle_count is how many scan periods must complete before the schedule balancer stops pushing the task towards a preferred node. This gives the scheduler a chance to place the task on an alternative node if the
include/linux/mm_types.h +0 -3
@@ -420,9 +420,6 @@ struct mm_struct {*/ unsigned long numa_next_scan; -/* numa_next_reset is when the PTE scanner period will be reset */ -unsigned long numa_next_reset; -/* Restart point for scanning and setting pte_numa */ unsigned long numa_scan_offset;
include/linux/sched/sysctl.h +0 -1
@@ -47,7 +47,6 @@ extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;extern unsigned int sysctl_numa_balancing_scan_delay;extern unsigned int sysctl_numa_balancing_scan_period_min;extern unsigned int sysctl_numa_balancing_scan_period_max; -extern unsigned int sysctl_numa_balancing_scan_period_reset;extern unsigned int sysctl_numa_balancing_scan_size;extern unsigned int sysctl_numa_balancing_settle_count;
kernel/sched/core.c +0 -1
@@ -1716,7 +1716,6 @@ static void __sched_fork(unsigned long clone_flags, struct task_struct *p)#ifdef CONFIG_NUMA_BALANCING if (p->mm &&atomic_read (&p->mm->mm_users) ==1 ) { p->mm->numa_next_scan = jiffies +msecs_to_jiffies (sysctl_numa_balancing_scan_delay); - p->mm->numa_next_reset = jiffies +msecs_to_jiffies (sysctl_numa_balancing_scan_period_reset); p->mm->numa_scan_seq =0 ; }
kernel/sched/fair.c +1 -17
@@ -826,7 +826,6 @@ static unsigned long task_h_load(struct task_struct *p);*/ unsigned int sysctl_numa_balancing_scan_period_min =1000 ;unsigned int sysctl_numa_balancing_scan_period_max =60000 ; -unsigned int sysctl_numa_balancing_scan_period_reset =60000 ;/* Portion of address space to scan in MB */ unsigned int sysctl_numa_balancing_scan_size =256 ;
@@ -1685,24 +1684,9 @@ void task_numa_work(struct callback_head *work)if (p->flags &PF_EXITING )return ; -if (!mm->numa_next_reset || !mm->numa_next_scan) { +if (!mm->numa_next_scan) { mm->numa_next_scan = now +msecs_to_jiffies (sysctl_numa_balancing_scan_delay); - mm->numa_next_reset = now + -msecs_to_jiffies (sysctl_numa_balancing_scan_period_reset); - } - -/* -* Reset the scan period if enough time has gone by. Objective is that -* scanning will be reduced if pages are properly placed. As tasks -* can enter different phases this needs to be re-examined. Lacking -* proper tracking of reference behaviour, this blunt hammer is used. -*/ - migrate = mm->numa_next_reset; -if (time_after (now, migrate)) { - p->numa_scan_period =task_scan_min (p); - next_scan = now +msecs_to_jiffies (sysctl_numa_balancing_scan_period_reset); -xchg (&mm->numa_next_reset, next_scan); }/*
kernel/sysctl.c +0 -7
@@ -371,13 +371,6 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, { - .procname = "numa_balancing_scan_period_reset", - .data = &sysctl_numa_balancing_scan_period_reset, - .maxlen = sizeof(unsigned int), - .mode = 0644, - .proc_handler = proc_dointvec, - }, - { .procname = "numa_balancing_scan_period_max_ms", .data = &sysctl_numa_balancing_scan_period_max, .maxlen = sizeof(unsigned int),
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 59/63] sched: numa: Remove the numa_balancing_scan_period_reset sysctl
Quoted 5 lines · Mel Gorman
With scan rate adaptions based on whether the workload has properly converged or not there should be no need for the scan period reset hammer. Get rid of it.
Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] sched/numa: Remove the numa_balancing_scan_period_reset sysctl
In reply to Mel Gormansched/numa: Remove the numa_balancing_scan_period_reset sysctl
Commit-ID: 930aa174fcc8b0efaad102fd80f677b92f35eaa2 Gitweb: http://git.kernel.org/tip/930aa174fcc8b0efaad102fd80f677b92f35eaa2 Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:37 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:18 +0200
sched/numa: Remove the numa_balancing_scan_period_reset sysctl
With scan rate adaptions based on whether the workload has properly converged or not there should be no need for the scan period reset hammer. Get rid of it.
--- Documentation/sysctl/kernel.txt | 11 +++-------- include/linux/mm_types.h | 3 --- include/linux/sched/sysctl.h | 1 - kernel/sched/core.c | 1 - kernel/sched/fair.c | 18 +----------------- kernel/sysctl.c | 7 ------- 6 files changed, 4 insertions(+), 37 deletions(-)
Documentation/sysctl/kernel.txt +3 -8
@@ -374,15 +374,13 @@ guarantee. If the target workload is already bound to NUMA nodes then this feature should be disabled. Otherwise, if the system overhead from the feature is too high then the rate the kernel samples for NUMA hinting faults may be controlled by the numa_balancing_scan_period_min_ms, -numa_balancing_scan_delay_ms, numa_balancing_scan_period_reset, -numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb and -numa_balancing_settle_count sysctls. +numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, +numa_balancing_scan_size_mb and numa_balancing_settle_count sysctls. ============================================================== numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, -numa_balancing_scan_period_max_ms, numa_balancing_scan_period_reset, -numa_balancing_scan_size_mb +numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb Automatic NUMA balancing scans tasks address space and unmaps pages to detect if pages are properly placed or if the data should be migrated to a
@@ -418,9 +416,6 @@ rate for each task. numa_balancing_scan_size_mb is how many megabytes worth of pages are scanned for a given scan. -numa_balancing_scan_period_reset is a blunt instrument that controls how -often a tasks scan delay is reset to detect sudden changes in task behaviour. - numa_balancing_settle_count is how many scan periods must complete before the schedule balancer stops pushing the task towards a preferred node. This gives the scheduler a chance to place the task on an alternative node if the
include/linux/mm_types.h +0 -3
@@ -420,9 +420,6 @@ struct mm_struct {*/ unsigned long numa_next_scan; -/* numa_next_reset is when the PTE scanner period will be reset */ -unsigned long numa_next_reset; -/* Restart point for scanning and setting pte_numa */ unsigned long numa_scan_offset;
include/linux/sched/sysctl.h +0 -1
@@ -47,7 +47,6 @@ extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;extern unsigned int sysctl_numa_balancing_scan_delay;extern unsigned int sysctl_numa_balancing_scan_period_min;extern unsigned int sysctl_numa_balancing_scan_period_max; -extern unsigned int sysctl_numa_balancing_scan_period_reset;extern unsigned int sysctl_numa_balancing_scan_size;extern unsigned int sysctl_numa_balancing_settle_count;
kernel/sched/core.c +0 -1
@@ -1721,7 +1721,6 @@ static void __sched_fork(unsigned long clone_flags, struct task_struct *p)#ifdef CONFIG_NUMA_BALANCING if (p->mm &&atomic_read (&p->mm->mm_users) ==1 ) { p->mm->numa_next_scan = jiffies +msecs_to_jiffies (sysctl_numa_balancing_scan_delay); - p->mm->numa_next_reset = jiffies +msecs_to_jiffies (sysctl_numa_balancing_scan_period_reset); p->mm->numa_scan_seq =0 ; }
kernel/sched/fair.c +1 -17
@@ -826,7 +826,6 @@ update_stats_curr_start(struct cfs_rq *cfs_rq, struct sched_entity *se)*/ unsigned int sysctl_numa_balancing_scan_period_min =1000 ;unsigned int sysctl_numa_balancing_scan_period_max =60000 ; -unsigned int sysctl_numa_balancing_scan_period_reset =60000 ;/* Portion of address space to scan in MB */ unsigned int sysctl_numa_balancing_scan_size =256 ;
@@ -1685,24 +1684,9 @@ void task_numa_work(struct callback_head *work)if (p->flags &PF_EXITING )return ; -if (!mm->numa_next_reset || !mm->numa_next_scan) { +if (!mm->numa_next_scan) { mm->numa_next_scan = now +msecs_to_jiffies (sysctl_numa_balancing_scan_delay); - mm->numa_next_reset = now + -msecs_to_jiffies (sysctl_numa_balancing_scan_period_reset); - } - -/* -* Reset the scan period if enough time has gone by. Objective is that -* scanning will be reduced if pages are properly placed. As tasks -* can enter different phases this needs to be re-examined. Lacking -* proper tracking of reference behaviour, this blunt hammer is used. -*/ - migrate = mm->numa_next_reset; -if (time_after (now, migrate)) { - p->numa_scan_period =task_scan_min (p); - next_scan = now +msecs_to_jiffies (sysctl_numa_balancing_scan_period_reset); -xchg (&mm->numa_next_reset, next_scan); }/*
kernel/sysctl.c +0 -7
@@ -371,13 +371,6 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, { - .procname = "numa_balancing_scan_period_reset", - .data = &sysctl_numa_balancing_scan_period_reset, - .maxlen = sizeof(unsigned int), - .mode = 0644, - .proc_handler = proc_dointvec, - }, - { .procname = "numa_balancing_scan_period_max_ms", .data = &sysctl_numa_balancing_scan_period_max, .maxlen = sizeof(unsigned int),
Mel Gorman
reviewerPATCH 60/63 mm: numa: revert temporarily disabling of NUMA migration
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
With the scan rate code working (at least for multi-instance specjbb), the large hammer that is "sched: Do not migrate memory immediately after switching node" can be replaced with something smarter. Revert temporarily migration disabling and all traces of numa_migrate_seq.
--- include/linux/sched.h | 1 - kernel/sched/core.c | 2 -- kernel/sched/fair.c | 25 +------------------------ mm/mempolicy.c | 12 ------------ 4 files changed, 1 insertion(+), 39 deletions(-)
include/linux/sched.h +0 -1
@@ -1330,7 +1330,6 @@ struct task_struct {#endif #ifdef CONFIG_NUMA_BALANCING int numa_scan_seq; -int numa_migrate_seq;unsigned int numa_scan_period;unsigned int numa_scan_period_max;unsigned long numa_migrate_retry;
kernel/sched/core.c +0 -2
@@ -1726,7 +1726,6 @@ static void __sched_fork(unsigned long clone_flags, struct task_struct *p) p->node_stamp =0ULL ; p->numa_scan_seq = p->mm ? p->mm->numa_scan_seq :0 ; - p->numa_migrate_seq =1 ; p->numa_scan_period = sysctl_numa_balancing_scan_delay; p->numa_work.next = &p->numa_work; p->numa_faults =NULL ;
@@ -4493,7 +4492,6 @@ void sched_setnuma(struct task_struct *p, int nid) p->sched_class->put_prev_task (rq, p); p->numa_preferred_nid = nid; - p->numa_migrate_seq =1 ;if (running) p->sched_class->set_curr_task (rq);
kernel/sched/fair.c +1 -24
@@ -1261,16 +1261,8 @@ static void numa_migrate_preferred(struct task_struct *p) {/* Success if task is already running on preferred CPU */ p->numa_migrate_retry =0 ; -if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid) { -/* -* If migration is temporarily disabled due to a task migration -* then re-enable it now as the task is running on its -* preferred node and memory should migrate locally -*/ -if (!p->numa_migrate_seq) - p->numa_migrate_seq++; +if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid)return ; - }/* This task has no NUMA fault statistics yet */ if (unlikely (p->numa_preferred_nid ==-1 ))
@@ -1367,7 +1359,6 @@ static void task_numa_placement(struct task_struct *p)if (p->numa_scan_seq == seq)return ; p->numa_scan_seq = seq; - p->numa_migrate_seq++; p->numa_scan_period_max =task_scan_max (p);/* If the task is part of a group prevent parallel updates to group stats */
@@ -4729,20 +4720,6 @@ static void move_task(struct task_struct *p, struct lb_env *env)set_task_cpu (p, env->dst_cpu);activate_task (env->dst_rq, p,0 );check_preempt_curr (env->dst_rq, p,0 ); -#ifdef CONFIG_NUMA_BALANCING -if (p->numa_preferred_nid !=-1 ) { -int src_nid =cpu_to_node (env->src_cpu); -int dst_nid =cpu_to_node (env->dst_cpu); - -/* -* If the load balancer has moved the task then limit -* migrations from taking place in the short term in -* case this is a short-lived migration. -*/ -if (src_nid != dst_nid && dst_nid != p->numa_preferred_nid) - p->numa_migrate_seq =0 ; - } -#endif }/*
mm/mempolicy.c +0 -12
@@ -2404,18 +2404,6 @@ int mpol_misplaced(struct page *page, struct vm_area_struct *vma, unsigned long last_cpupid =page_cpupid_xchg_last (page, this_cpupid);if (!cpupid_pid_unset (last_cpupid) &&cpupid_to_nid (last_cpupid) != thisnid) goto out; - -#ifdef CONFIG_NUMA_BALANCING -/* -* If the scheduler has just moved us away from our -* preferred node, do not bother migrating pages yet. -* This way a short and temporary process migration will -* not cause excessive memory migration. -*/ -if (thisnid != current->numa_preferred_nid && - !current->numa_migrate_seq) - goto out; -#endif }if (curnid != polnid)
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] mm: numa: Revert temporarily disabling of NUMA migration
mm: numa: Revert temporarily disabling of NUMA migration
Commit-ID: 1e3646ffc64b232cb14a5ef01d7b98997c1b73f9 Gitweb: http://git.kernel.org/tip/1e3646ffc64b232cb14a5ef01d7b98997c1b73f9 Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:38 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:20 +0200
mm: numa: Revert temporarily disabling of NUMA migration
With the scan rate code working (at least for multi-instance specjbb), the large hammer that is "sched: Do not migrate memory immediately after switching node" can be replaced with something smarter. Revert temporarily migration disabling and all traces of numa_migrate_seq.
--- include/linux/sched.h | 1 - kernel/sched/core.c | 2 -- kernel/sched/fair.c | 25 +------------------------ mm/mempolicy.c | 12 ------------ 4 files changed, 1 insertion(+), 39 deletions(-)
include/linux/sched.h +0 -1
@@ -1340,7 +1340,6 @@ struct task_struct {#endif #ifdef CONFIG_NUMA_BALANCING int numa_scan_seq; -int numa_migrate_seq;unsigned int numa_scan_period;unsigned int numa_scan_period_max;unsigned long numa_migrate_retry;
kernel/sched/core.c +0 -2
@@ -1731,7 +1731,6 @@ static void __sched_fork(unsigned long clone_flags, struct task_struct *p) p->node_stamp =0ULL ; p->numa_scan_seq = p->mm ? p->mm->numa_scan_seq :0 ; - p->numa_migrate_seq =1 ; p->numa_scan_period = sysctl_numa_balancing_scan_delay; p->numa_work.next = &p->numa_work; p->numa_faults =NULL ;
@@ -4488,7 +4487,6 @@ void sched_setnuma(struct task_struct *p, int nid) p->sched_class->put_prev_task (rq, p); p->numa_preferred_nid = nid; - p->numa_migrate_seq =1 ;if (running) p->sched_class->set_curr_task (rq);
kernel/sched/fair.c +1 -24
@@ -1261,16 +1261,8 @@ static void numa_migrate_preferred(struct task_struct *p) {/* Success if task is already running on preferred CPU */ p->numa_migrate_retry =0 ; -if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid) { -/* -* If migration is temporarily disabled due to a task migration -* then re-enable it now as the task is running on its -* preferred node and memory should migrate locally -*/ -if (!p->numa_migrate_seq) - p->numa_migrate_seq++; +if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid)return ; - }/* This task has no NUMA fault statistics yet */ if (unlikely (p->numa_preferred_nid ==-1 ))
@@ -1367,7 +1359,6 @@ static void task_numa_placement(struct task_struct *p)if (p->numa_scan_seq == seq)return ; p->numa_scan_seq = seq; - p->numa_migrate_seq++; p->numa_scan_period_max =task_scan_max (p);/* If the task is part of a group prevent parallel updates to group stats */
@@ -4730,20 +4721,6 @@ static void move_task(struct task_struct *p, struct lb_env *env)set_task_cpu (p, env->dst_cpu);activate_task (env->dst_rq, p,0 );check_preempt_curr (env->dst_rq, p,0 ); -#ifdef CONFIG_NUMA_BALANCING -if (p->numa_preferred_nid !=-1 ) { -int src_nid =cpu_to_node (env->src_cpu); -int dst_nid =cpu_to_node (env->dst_cpu); - -/* -* If the load balancer has moved the task then limit -* migrations from taking place in the short term in -* case this is a short-lived migration. -*/ -if (src_nid != dst_nid && dst_nid != p->numa_preferred_nid) - p->numa_migrate_seq =0 ; - } -#endif }/*
mm/mempolicy.c +0 -12
@@ -2404,18 +2404,6 @@ int mpol_misplaced(struct page *page, struct vm_area_struct *vma, unsigned long last_cpupid =page_cpupid_xchg_last (page, this_cpupid);if (!cpupid_pid_unset (last_cpupid) &&cpupid_to_nid (last_cpupid) != thisnid) goto out; - -#ifdef CONFIG_NUMA_BALANCING -/* -* If the scheduler has just moved us away from our -* preferred node, do not bother migrating pages yet. -* This way a short and temporary process migration will -* not cause excessive memory migration. -*/ -if (thisnid != current->numa_preferred_nid && - !current->numa_migrate_seq) - goto out; -#endif }if (curnid != polnid)
Mel Gorman
reviewerPATCH 61/63 sched: numa: skip some page migrations after a shared fault
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
Shared faults can lead to lots of unnecessary page migrations, slowing down the system, and causing private faults to hit the per-pgdat migration ratelimit.
This patch adds sysctl numa_balancing_migrate_deferred, which specifies how many shared page migrations to skip unconditionally, after each page migration that is skipped because it is a shared fault.
This reduces the number of page migrations back and forth in shared fault situations. It also gives a strong preference to the tasks that are already running where most of the memory is, and to moving the other tasks to near the memory.
Testing this with a much higher scan rate than the default still seems to result in fewer page migrations than before.
Memory seems to be somewhat better consolidated than previously, with multi-instance specjbb runs on a 4 node system.
--- Documentation/sysctl/kernel.txt | 10 ++++++++- include/linux/sched.h | 5 ++++- kernel/sched/fair.c | 8 +++++++ kernel/sysctl.c | 7 ++++++ mm/mempolicy.c | 48 ++++++++++++++++++++++++++++++++++++++++- 5 files changed, 75 insertions(+), 3 deletions(-)
Documentation/sysctl/kernel.txt +9 -1
@@ -375,7 +375,8 @@ feature should be disabled. Otherwise, if the system overhead from the feature is too high then the rate the kernel samples for NUMA hinting faults may be controlled by the numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, -numa_balancing_scan_size_mb and numa_balancing_settle_count sysctls. +numa_balancing_scan_size_mb, numa_balancing_settle_count sysctls and +numa_balancing_migrate_deferred. ==============================================================
@@ -421,6 +422,13 @@ the schedule balancer stops pushing the task towards a preferred node. This gives the scheduler a chance to place the task on an alternative node if the preferred node is overloaded. +numa_balancing_migrate_deferred is how many page migrations get skipped +unconditionally, after a page migration is skipped because a page is shared +with other tasks. This reduces page migration overhead, and determines +how much stronger the "move task near its memory" policy scheduler becomes, +versus the "move memory near its task" memory management policy, for workloads +with shared memory. + ============================================================== osrelease, ostype & version:
include/linux/sched.h +4 -1
@@ -1332,6 +1332,8 @@ struct task_struct {int numa_scan_seq;unsigned int numa_scan_period;unsigned int numa_scan_period_max; +int numa_preferred_nid; +int numa_migrate_deferred;unsigned long numa_migrate_retry;u64 node_stamp;/* migration stamp */ struct callback_head numa_work;
@@ -1362,7 +1364,6 @@ struct task_struct {*/ unsigned long numa_faults_locality[2 ]; -int numa_preferred_nid;unsigned long numa_pages_migrated;#endif /* CONFIG_NUMA_BALANCING */
@@ -1459,6 +1460,8 @@ extern void task_numa_fault(int last_node, int node, int pages, int flags);extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled);extern void task_numa_free (struct task_struct *p); + +extern unsigned int sysctl_numa_balancing_migrate_deferred;#else static inline void task_numa_fault (int last_node,int node,int pages,int flags)
kernel/sched/fair.c +8 -0
@@ -833,6 +833,14 @@ unsigned int sysctl_numa_balancing_scan_size = 256;/* Scan @scan_size MB every @scan_period after an initial @scan_delay in ms */ unsigned int sysctl_numa_balancing_scan_delay =1000 ; +/* +* After skipping a page migration on a shared page, skip N more numa page +* migrations unconditionally. This reduces the number of NUMA migrations +* in shared memory workloads, and has the effect of pulling tasks towards +* where their memory lives, over pulling the memory towards the task. +*/ +unsigned int sysctl_numa_balancing_migrate_deferred =16 ; +static unsigned int task_nr_scan_windows (struct task_struct *p) {unsigned long rss =0 ;
kernel/sysctl.c +7 -0
@@ -391,6 +391,13 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, + { + .procname = "numa_balancing_migrate_deferred", + .data = &sysctl_numa_balancing_migrate_deferred, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = proc_dointvec, + },#endif /* CONFIG_NUMA_BALANCING */ #endif /* CONFIG_SCHED_DEBUG */ {
mm/mempolicy.c +47 -1
60 lines not on this page · raw message
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Skip some page migrations after a shared fault
sched/numa: Skip some page migrations after a shared fault
Commit-ID: de1c9ce6f07fec0381a39a9d0b379ea35aa1167f Gitweb: http://git.kernel.org/tip/de1c9ce6f07fec0381a39a9d0b379ea35aa1167f Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:39 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:21 +0200
sched/numa: Skip some page migrations after a shared fault
Shared faults can lead to lots of unnecessary page migrations, slowing down the system, and causing private faults to hit the per-pgdat migration ratelimit.
This patch adds sysctl numa_balancing_migrate_deferred, which specifies how many shared page migrations to skip unconditionally, after each page migration that is skipped because it is a shared fault.
This reduces the number of page migrations back and forth in shared fault situations. It also gives a strong preference to the tasks that are already running where most of the memory is, and to moving the other tasks to near the memory.
Testing this with a much higher scan rate than the default still seems to result in fewer page migrations than before.
Memory seems to be somewhat better consolidated than previously, with multi-instance specjbb runs on a 4 node system.
--- Documentation/sysctl/kernel.txt | 10 ++++++++- include/linux/sched.h | 5 ++++- kernel/sched/fair.c | 8 +++++++ kernel/sysctl.c | 7 ++++++ mm/mempolicy.c | 48 ++++++++++++++++++++++++++++++++++++++++- 5 files changed, 75 insertions(+), 3 deletions(-)
Documentation/sysctl/kernel.txt +9 -1
@@ -375,7 +375,8 @@ feature should be disabled. Otherwise, if the system overhead from the feature is too high then the rate the kernel samples for NUMA hinting faults may be controlled by the numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, -numa_balancing_scan_size_mb and numa_balancing_settle_count sysctls. +numa_balancing_scan_size_mb, numa_balancing_settle_count sysctls and +numa_balancing_migrate_deferred. ==============================================================
@@ -421,6 +422,13 @@ the schedule balancer stops pushing the task towards a preferred node. This gives the scheduler a chance to place the task on an alternative node if the preferred node is overloaded. +numa_balancing_migrate_deferred is how many page migrations get skipped +unconditionally, after a page migration is skipped because a page is shared +with other tasks. This reduces page migration overhead, and determines +how much stronger the "move task near its memory" policy scheduler becomes, +versus the "move memory near its task" memory management policy, for workloads +with shared memory. + ============================================================== osrelease, ostype & version:
include/linux/sched.h +4 -1
@@ -1342,6 +1342,8 @@ struct task_struct {int numa_scan_seq;unsigned int numa_scan_period;unsigned int numa_scan_period_max; +int numa_preferred_nid; +int numa_migrate_deferred;unsigned long numa_migrate_retry;u64 node_stamp;/* migration stamp */ struct callback_head numa_work;
@@ -1372,7 +1374,6 @@ struct task_struct {*/ unsigned long numa_faults_locality[2 ]; -int numa_preferred_nid;unsigned long numa_pages_migrated;#endif /* CONFIG_NUMA_BALANCING */
@@ -1469,6 +1470,8 @@ extern void task_numa_fault(int last_node, int node, int pages, int flags);extern pid_t task_numa_group_id (struct task_struct *p);extern void set_numabalancing_state (bool enabled);extern void task_numa_free (struct task_struct *p); + +extern unsigned int sysctl_numa_balancing_migrate_deferred;#else static inline void task_numa_fault (int last_node,int node,int pages,int flags)
kernel/sched/fair.c +8 -0
@@ -833,6 +833,14 @@ unsigned int sysctl_numa_balancing_scan_size = 256;/* Scan @scan_size MB every @scan_period after an initial @scan_delay in ms */ unsigned int sysctl_numa_balancing_scan_delay =1000 ; +/* +* After skipping a page migration on a shared page, skip N more numa page +* migrations unconditionally. This reduces the number of NUMA migrations +* in shared memory workloads, and has the effect of pulling tasks towards +* where their memory lives, over pulling the memory towards the task. +*/ +unsigned int sysctl_numa_balancing_migrate_deferred =16 ; +static unsigned int task_nr_scan_windows (struct task_struct *p) {unsigned long rss =0 ;
kernel/sysctl.c +7 -0
@@ -391,6 +391,13 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, + { + .procname = "numa_balancing_migrate_deferred", + .data = &sysctl_numa_balancing_migrate_deferred, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = proc_dointvec, + },#endif /* CONFIG_NUMA_BALANCING */ #endif /* CONFIG_SCHED_DEBUG */ {
mm/mempolicy.c +47 -1
60 lines not on this page · raw message
Mel Gorman
reviewerPATCH 62/63 sched: numa: use unsigned longs for numa group fault stats
In reply to Mel GormanAs Peter says "If you're going to hold locks you can also do away with all that atomic_long_*() nonsense". Lock aquisition moved slightly to protect the updates.
--- kernel/sched/fair.c | 49 ++++++++++++++++++++----------------------------- 1 file changed, 20 insertions(+), 29 deletions(-)
kernel/sched/fair.c +20 -29
@@ -916,8 +916,8 @@ struct numa_group {struct list_head task_list;struct rcu_head rcu; -atomic_long_t total_faults; -atomic_long_t faults[0 ]; +unsigned long total_faults; +unsigned long faults[0 ]; };pid_t task_numa_group_id (struct task_struct *p)
@@ -944,8 +944,7 @@ static inline unsigned long group_faults(struct task_struct *p, int nid)if (!p->numa_group)return 0 ; -return atomic_long_read (&p->numa_group->faults[2 *nid]) + -atomic_long_read (&p->numa_group->faults[2 *nid+1 ]); +return p->numa_group->faults[2 *nid] + p->numa_group->faults[2 *nid+1 ]; }/*
@@ -971,17 +970,10 @@ static inline unsigned long task_weight(struct task_struct *p, int nid)static inline unsigned long group_weight (struct task_struct *p,int nid) { -unsigned long total_faults; - -if (!p->numa_group) -return 0 ; - - total_faults =atomic_long_read (&p->numa_group->total_faults); - -if (!total_faults) +if (!p->numa_group || !p->numa_group->total_faults)return 0 ; -return 1000 *group_faults (p, nid) / total_faults; +return 1000 *group_faults (p, nid) / p->numa_group->total_faults; }static unsigned long weighted_cpuload (const int cpu);
@@ -1397,9 +1389,9 @@ static void task_numa_placement(struct task_struct *p) p->total_numa_faults += diff;if (p->numa_group) {/* safe because we can only change our own group */ -atomic_long_add (diff, &p->numa_group->faults[i]); -atomic_long_add (diff, &p->numa_group->total_faults); - group_faults +=atomic_long_read (&p->numa_group->faults[i]); + p->numa_group->faults[i] += diff; + p->numa_group->total_faults += diff; + group_faults += p->numa_group->faults[i]; } }
@@ -1475,7 +1467,7 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags,if (unlikely (!p->numa_group)) {unsigned int size =sizeof (struct numa_group ) + -2 *nr_node_ids*sizeof (atomic_long_t); +2 *nr_node_ids*sizeof (unsigned long ); grp =kzalloc (size,GFP_KERNEL | __GFP_NOWARN);if (!grp)
@@ -1487,9 +1479,9 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags, grp->gid = p->pid;for (i =0 ; i <2 *nr_node_ids; i++) -atomic_long_set (&grp->faults[i], p->numa_faults[i]); + grp->faults[i] = p->numa_faults[i]; -atomic_long_set (&grp->total_faults, p->total_numa_faults); + grp->total_faults = p->total_numa_faults;list_add (&p->numa_entry, &grp->task_list); grp->nr_tasks++;
@@ -1543,14 +1535,14 @@ unlock:if (!join)return ; +double_lock (&my_grp->lock, &grp->lock); +for (i =0 ; i <2 *nr_node_ids; i++) { -atomic_long_sub (p->numa_faults[i], &my_grp->faults[i]); -atomic_long_add (p->numa_faults[i], &grp->faults[i]); + my_grp->faults[i] -= p->numa_faults[i]; + grp->faults[i] += p->numa_faults[i]; } -atomic_long_sub (p->total_numa_faults, &my_grp->total_faults); -atomic_long_add (p->total_numa_faults, &grp->total_faults); - -double_lock (&my_grp->lock, &grp->lock); + my_grp->total_faults -= p->total_numa_faults; + grp->total_faults += p->total_numa_faults;list_move (&p->numa_entry, &grp->task_list); my_grp->nr_tasks--;
@@ -1571,12 +1563,11 @@ void task_numa_free(struct task_struct *p)void *numa_faults = p->numa_faults;if (grp) { +spin_lock (&grp->lock);for (i =0 ; i <2 *nr_node_ids; i++) -atomic_long_sub (p->numa_faults[i], &grp->faults[i]); - -atomic_long_sub (p->total_numa_faults, &grp->total_faults); + grp->faults[i] -= p->numa_faults[i]; + grp->total_faults -= p->total_numa_faults; -spin_lock (&grp->lock);list_del (&p->numa_entry); grp->nr_tasks--;spin_unlock (&grp->lock);
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 62/63] sched: numa: use unsigned longs for numa group fault stats
Quoted 5 lines · Mel Gorman
As Peter says "If you're going to hold locks you can also do away with all that atomic_long_*() nonsense". Lock aquisition moved slightly to protect the updates.
Signed-off-by Mel Gorman <[email protected]>
Signature · 7 lines
All rights reversed -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Mel Gorman
merge bot[tip:sched/core] sched/numa: Use unsigned longs for numa group fault stats
In reply to Mel Gormansched/numa: Use unsigned longs for numa group fault stats
Commit-ID: 989348b5fc2367d6880d23a1c779a90bbb6f9baf Gitweb: http://git.kernel.org/tip/989348b5fc2367d6880d23a1c779a90bbb6f9baf Author: Mel Gorman <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:40 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:23 +0200
sched/numa: Use unsigned longs for numa group fault stats
As Peter says "If you're going to hold locks you can also do away with all that atomic_long_*() nonsense". Lock aquisition moved slightly to protect the updates.
--- kernel/sched/fair.c | 49 ++++++++++++++++++++----------------------------- 1 file changed, 20 insertions(+), 29 deletions(-)
kernel/sched/fair.c +20 -29
@@ -916,8 +916,8 @@ struct numa_group {struct list_head task_list;struct rcu_head rcu; -atomic_long_t total_faults; -atomic_long_t faults[0 ]; +unsigned long total_faults; +unsigned long faults[0 ]; };pid_t task_numa_group_id (struct task_struct *p)
@@ -944,8 +944,7 @@ static inline unsigned long group_faults(struct task_struct *p, int nid)if (!p->numa_group)return 0 ; -return atomic_long_read (&p->numa_group->faults[2 *nid]) + -atomic_long_read (&p->numa_group->faults[2 *nid+1 ]); +return p->numa_group->faults[2 *nid] + p->numa_group->faults[2 *nid+1 ]; }/*
@@ -971,17 +970,10 @@ static inline unsigned long task_weight(struct task_struct *p, int nid)static inline unsigned long group_weight (struct task_struct *p,int nid) { -unsigned long total_faults; - -if (!p->numa_group) -return 0 ; - - total_faults =atomic_long_read (&p->numa_group->total_faults); - -if (!total_faults) +if (!p->numa_group || !p->numa_group->total_faults)return 0 ; -return 1000 *group_faults (p, nid) / total_faults; +return 1000 *group_faults (p, nid) / p->numa_group->total_faults; }static unsigned long weighted_cpuload (const int cpu);
@@ -1397,9 +1389,9 @@ static void task_numa_placement(struct task_struct *p) p->total_numa_faults += diff;if (p->numa_group) {/* safe because we can only change our own group */ -atomic_long_add (diff, &p->numa_group->faults[i]); -atomic_long_add (diff, &p->numa_group->total_faults); - group_faults +=atomic_long_read (&p->numa_group->faults[i]); + p->numa_group->faults[i] += diff; + p->numa_group->total_faults += diff; + group_faults += p->numa_group->faults[i]; } }
@@ -1475,7 +1467,7 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags,if (unlikely (!p->numa_group)) {unsigned int size =sizeof (struct numa_group ) + -2 *nr_node_ids*sizeof (atomic_long_t); +2 *nr_node_ids*sizeof (unsigned long ); grp =kzalloc (size,GFP_KERNEL | __GFP_NOWARN);if (!grp)
@@ -1487,9 +1479,9 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags, grp->gid = p->pid;for (i =0 ; i <2 *nr_node_ids; i++) -atomic_long_set (&grp->faults[i], p->numa_faults[i]); + grp->faults[i] = p->numa_faults[i]; -atomic_long_set (&grp->total_faults, p->total_numa_faults); + grp->total_faults = p->total_numa_faults;list_add (&p->numa_entry, &grp->task_list); grp->nr_tasks++;
@@ -1543,14 +1535,14 @@ unlock:if (!join)return ; +double_lock (&my_grp->lock, &grp->lock); +for (i =0 ; i <2 *nr_node_ids; i++) { -atomic_long_sub (p->numa_faults[i], &my_grp->faults[i]); -atomic_long_add (p->numa_faults[i], &grp->faults[i]); + my_grp->faults[i] -= p->numa_faults[i]; + grp->faults[i] += p->numa_faults[i]; } -atomic_long_sub (p->total_numa_faults, &my_grp->total_faults); -atomic_long_add (p->total_numa_faults, &grp->total_faults); - -double_lock (&my_grp->lock, &grp->lock); + my_grp->total_faults -= p->total_numa_faults; + grp->total_faults += p->total_numa_faults;list_move (&p->numa_entry, &grp->task_list); my_grp->nr_tasks--;
@@ -1571,12 +1563,11 @@ void task_numa_free(struct task_struct *p)void *numa_faults = p->numa_faults;if (grp) { +spin_lock (&grp->lock);for (i =0 ; i <2 *nr_node_ids; i++) -atomic_long_sub (p->numa_faults[i], &grp->faults[i]); - -atomic_long_sub (p->total_numa_faults, &grp->total_faults); + grp->faults[i] -= p->numa_faults[i]; + grp->total_faults -= p->total_numa_faults; -spin_lock (&grp->lock);list_del (&p->numa_entry); grp->nr_tasks--;spin_unlock (&grp->lock);
Mel Gorman
reviewerPATCH 63/63 sched: numa: periodically retry task_numa_migrate
In reply to Mel GormanFrom: Rik van Riel <[email protected]>
Short spikes of CPU load can lead to a task being migrated away from its preferred node for temporary reasons.
It is important that the task is migrated back to where it belongs, in order to avoid migrating too much memory to its new location, and generally disturbing a task's NUMA location.
This patch fixes NUMA placement for 4 specjbb instances on a 4 node system. Without this patch, things take longer to converge, and processes are not always completely on their own node.
--- kernel/sched/fair.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
kernel/sched/fair.c +13 -9
@@ -1259,18 +1259,19 @@ static int task_numa_migrate(struct task_struct *p)/* Attempt to migrate a task to a CPU on the preferred node. */ static void numa_migrate_preferred (struct task_struct *p) { -/* Success if task is already running on preferred CPU */ - p->numa_migrate_retry =0 ; -if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid) +/* This task has no NUMA fault statistics yet */ +if (unlikely (p->numa_preferred_nid ==-1 || !p->numa_faults))return ; -/* This task has no NUMA fault statistics yet */ -if (unlikely (p->numa_preferred_nid ==-1 )) +/* Periodically retry migrating the task to the preferred node */ + p->numa_migrate_retry = jiffies +HZ ; + +/* Success if task is already running on preferred CPU */ +if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid)return ;/* Otherwise, try migrate to a CPU on the preferred node */ -if (task_numa_migrate (p) !=0 ) - p->numa_migrate_retry = jiffies +HZ *5 ; +task_numa_migrate (p); }/*
@@ -1629,8 +1630,11 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags)task_numa_placement (p); -/* Retry task to preferred node migration if it previously failed */ -if (p->numa_migrate_retry &&time_after (jiffies, p->numa_migrate_retry)) +/* +* Retry task to preferred node migration periodically, in case it +* case it previously failed, or the scheduler moved us. +*/ +if (time_after (jiffies, p->numa_migrate_retry))numa_migrate_preferred (p);if (migrated)
Signature · 7 lines
1.8.4 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
tip-bot for Rik van Riel
merge bot[tip:sched/core] sched/numa: Retry task_numa_migrate() periodically
sched/numa: Retry task_numa_migrate() periodically
Commit-ID: 2739d3eef3a93a92c366a3a0bb85a0afe09e8b8c Gitweb: http://git.kernel.org/tip/2739d3eef3a93a92c366a3a0bb85a0afe09e8b8c Author: Rik van Riel <[email protected]> AuthorDate: Mon, 7 Oct 2013 11:29:41 +0100 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 9 Oct 2013 14:48:25 +0200
sched/numa: Retry task_numa_migrate() periodically
Short spikes of CPU load can lead to a task being migrated away from its preferred node for temporary reasons.
It is important that the task is migrated back to where it belongs, in order to avoid migrating too much memory to its new location, and generally disturbing a task's NUMA location.
This patch fixes NUMA placement for 4 specjbb instances on a 4 node system. Without this patch, things take longer to converge, and processes are not always completely on their own node.
--- kernel/sched/fair.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
kernel/sched/fair.c +13 -9
@@ -1259,18 +1259,19 @@ static int task_numa_migrate(struct task_struct *p)/* Attempt to migrate a task to a CPU on the preferred node. */ static void numa_migrate_preferred (struct task_struct *p) { -/* Success if task is already running on preferred CPU */ - p->numa_migrate_retry =0 ; -if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid) +/* This task has no NUMA fault statistics yet */ +if (unlikely (p->numa_preferred_nid ==-1 || !p->numa_faults))return ; -/* This task has no NUMA fault statistics yet */ -if (unlikely (p->numa_preferred_nid ==-1 )) +/* Periodically retry migrating the task to the preferred node */ + p->numa_migrate_retry = jiffies +HZ ; + +/* Success if task is already running on preferred CPU */ +if (cpu_to_node (task_cpu (p)) == p->numa_preferred_nid)return ;/* Otherwise, try migrate to a CPU on the preferred node */ -if (task_numa_migrate (p) !=0 ) - p->numa_migrate_retry = jiffies +HZ *5 ; +task_numa_migrate (p); }/*
@@ -1629,8 +1630,11 @@ void task_numa_fault(int last_cpupid, int node, int pages, int flags)task_numa_placement (p); -/* Retry task to preferred node migration if it previously failed */ -if (p->numa_migrate_retry &&time_after (jiffies, p->numa_migrate_retry)) +/* +* Retry task to preferred node migration periodically, in case it +* case it previously failed, or the scheduler moved us. +*/ +if (time_after (jiffies, p->numa_migrate_retry))numa_migrate_preferred (p);if (migrated)
Quoted 8 lines · Mel Gorman
This series has roughly the same goals as previous versions despite the size. It reduces overhead of automatic balancing through scan rate reduction and the avoidance of TLB flushes. It selects a preferred node and moves tasks towards their memory as well as moving memory toward their task. It handles shared pages and groups related tasks together. Some problems such as shared page interleaving and properly dealing with processes that are larger than a node are being deferred. This version should be ready for wider testing in -tip.
Thanks Mel - the series looks really nice. I've applied the patches to tip:sched/core and will push them out later today if they pass testing here.
Quoted 3 lines
Note that with kernel 3.12-rc3 that numa balancing will fail to boot if
CONFIG_JUMP_LABELis configured. This is a separate bug that is currently being dealt with.
Okay, this is about:
https://lkml.org/lkml/2013/9/30/308
Note that Peter and me saw no crashes so far, and we boot with CONFIG_JUMP_LABEL=y and CONFIG_NUMA_BALANCING=y. It seems like an unrelated bug in any case, perhaps related to specific details in your kernel image?
2)
I also noticed a small Kconfig annoyance:
config NUMA_BALANCING_DEFAULT_ENABLED
bool "Automatically enable NUMA aware memory/task placement" default y
depends on NUMA_BALANCING
help
If set, autonumic NUMA balancing will be enabled if running on a NUMA machine.
config NUMA_BALANCING
bool "Memory placement aware NUMA scheduler" depends on ARCH_SUPPORTS_NUMA_BALANCING depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY depends on SMP && NUMA && MIGRATION help
This option adds support for automatic NUM
the NUMA_BALANCING_DEFAULT_ENABLED option should come after the NUMA_BALANCING entries - things like 'make oldconfig' produce weird output otherwise.
3)
Plus in addition to PeterZ's build fix I noticed this new build warning on i386 UP kernels:
kernel/sched/fair.c:819:22: warning: 'task_h_load' declared 'static' but never defined [-Wunused-function]
Introduced here I think:
sched/numa: Use a system-wide search to find swap/migration candidates
Thanks,
Ingo
Quoted 10 lines · Ingo Molnar
3)
Plus in addition to PeterZ's build fix I noticed this new build warning on i386 UP kernels:
kernel/sched/fair.c:819:22: warning: 'task_h_load' declared 'static' but never defined [-Wunused-function]Introduced here I think:
sched/numa: Use a system-wide search to find swap/migration candidates
4)
allyes builds fail on x86 32-bit:
mm/mmzone.c:101:5: error: redefinition of ‘page_cpupid_xchg_last’
The reason is the mismatch in definitions:
mm.h:
#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS
mmzone.c:
#if defined(CONFIG_NUMA_BALANCING) && !defined(LAST_CPUPID_IN_PAGE_FLAGS)
Note the missing 'NOT_' in the latter line. I've changed it to:
#if defined(CONFIG_NUMA_BALANCING) && defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS)
Thanks,
Ingo
Quoted 7 lines · Ingo Molnar
mmzone.c:#if defined(CONFIG_NUMA_BALANCING) && !defined(LAST_CPUPID_IN_PAGE_FLAGS)Note the missing '
NOT_' in the latter line. I've changed it to:#if defined(CONFIG_NUMA_BALANCING) && defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS)
Actually, I think it should be:
#if defined(CONFIG_NUMA_BALANCING) && !defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS)
I'll fold back this fix to keep it bisectable on 32-bit platforms.
Thanks,
Ingo
Peter Zijlstra
maintainerQuoted 1 line · Ingo Molnar
kernel/sched/fair.c:819:22: warning: 'task_h_load' declared 'static' but never defined [-Wunused-function]
Not too pretty, but it avoids the warning:
---
kernel/sched/fair.c +2 -2
@@ -681,6 +681,8 @@ static u64 sched_vslice(struct cfs_rq *c }#ifdef CONFIG_SMP +static unsigned long task_h_load (struct task_struct *p); +static inline void __update_task_entity_contrib (struct sched_entity *se);/* Give new task start runnable values to heavy its load in infant time */
@@ -816,8 +818,6 @@ update_stats_curr_start(struct cfs_rq *c* Scheduling class queueing methods: */ -static unsigned long task_h_load (struct task_struct *p); -#ifdef CONFIG_NUMA_BALANCING /* * Approximate time to scan a full NUMA task in ms. The task scan period is
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 18 lines · Peter Zijlstra
Quoted 1 line · Ingo Molnar
kernel/sched/fair.c:819:22: warning: 'task_h_load' declared 'static' but never defined [-Wunused-function]Not too pretty, but it avoids the warning:
---
kernel/sched/fair.c +2
-0@@ -681,6 +681,8 @@ static u64 sched_vslice(struct cfs_rq *c }#ifdef CONFIG_SMP +static unsigned long task_h_load (struct task_struct *p); +static inline void __update_task_entity_contrib (struct sched_entity *se);/* Give new task start runnable values to heavy its load in infant time */
kernel/sched/fair.c update_stats_curr_start(struct cfs_rq *c · line 821
Quoted 6 lines
kernel/sched/fair.c +0
-2@@ -816,8 +818,6 @@ update_stats_curr_start(struct cfs_rq *c* Scheduling class queueing methods: */ -static unsigned long task_h_load (struct task_struct *p); -#ifdef CONFIG_NUMA_BALANCING
Hm, so we really want to do a split-up of this file once things have calmed down - that will address such dependency issues.
Until then this fix will do, I've backmerged it to the originating patch.
Thanks,
Ingo
Mel Gorman
reviewerQuoted 12 lines · Ingo Molnar
Quoted 8 lines · Mel Gorman
This series has roughly the same goals as previous versions despite the size. It reduces overhead of automatic balancing through scan rate reduction and the avoidance of TLB flushes. It selects a preferred node and moves tasks towards their memory as well as moving memory toward their task. It handles shared pages and groups related tasks together. Some problems such as shared page interleaving and properly dealing with processes that are larger than a node are being deferred. This version should be ready for wider testing in -tip.
Quoted 4 lines
Thanks Mel - the series looks really nice. I've applied the patches to tip:sched/core and will push them out later today if they pass testing here.
Thanks very much!
Quoted 4 lines
Quoted 3 lines
Note that with kernel 3.12-rc3 that numa balancing will fail to boot if
CONFIG_JUMP_LABELis configured. This is a separate bug that is currently being dealt with.
Quoted 9 lines
Okay, this is about:
https://lkml.org/lkml/2013/9/30/308
Note that Peter and me saw no crashes so far, and we boot with
CONFIG_JUMP_LABEL=yandCONFIG_NUMA_BALANCING=y. It seems like an unrelated bug in any case, perhaps related to specific details in your kernel image?
Possibly or it has been fixed since and I missed it. I'll test latest tip and see what falls out.
Quoted 20 lines
2)
I also noticed a small
Kconfigannoyance:config
NUMA_BALANCING_DEFAULT_ENABLED
bool "Automatically enable NUMA aware memory/task placement" default y
depends onNUMA_BALANCING
help
If set, autonumic NUMA balancing will be enabled if running on a NUMA machine.config
NUMA_BALANCING
bool "Memory placement aware NUMA scheduler" depends onARCH_SUPPORTS_NUMA_BALANCINGdepends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY depends on SMP && NUMA && MIGRATION help
This option adds support for automatic NUM
Quoted 4 lines
the
NUMA_BALANCING_DEFAULT_ENABLEDoption should come after theNUMA_BALANCINGentries - things like 'make oldconfig' produce weird output otherwise.
Ok, I did not realise that would be a problem. Thanks for fixing it up as well as the build errors on UP.
Signature · 2 lines
Mel Gorman SUSE Labs
Hm, so I'm seeing boot crashes with the config attached:
INIT: version 2.86 booting
BUG: unable to handle kernel BUG: unable to handle kernel paging requestpaging request at eaf10f40 at eaf10f40 IP:IP: [<b103e0ef>] task_work_run+0x52/0x87 [<b103e0ef>] task_work_run+0x52/0x87 *pde = 3fbf9067 *pde = 3fbf9067 *pte = 3af10060 *pte = 3af10060 Oops: 0000 [#1] Oops: 0000 [#1] DEBUG_PAGEALLOCDEBUG_PAGEALLOC CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 task: eaf157a0 ti: eacf2000 task.ti: eacf2000
Note that the config does not have NUMA_BALANCING enabled. With another config I also had a failed bootup due to the OOM killer kicking in. That didn't have NUMA_BALANCING enabled either.
Yet this all started today, after merging the NUMA patches.
Any ideas?
Thanks,
Ingo
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.12.0-rc4 Kernel Configuration
#
# CONFIG_64BIT is not setCONFIG_X86_32=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_DEBUG=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_KTIME_SCALAR=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not setCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not setCONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not setCONFIG_RD_LZMA=yCONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=yCONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not setCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=yCONFIG_JUMP_LABEL=yCONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_KPROBES_ON_FTRACE=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_CONTIGUOUS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_ARCH_WANT_IPC_PARSE_VERSION=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=yCONFIG_HAVE_ARCH_SOFT_DIRTY=yCONFIG_MODULES_USE_ELF_REL=yCONFIG_CLONE_BACKWARDS=yCONFIG_OLD_SIGSUSPEND3=yCONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_BLOCK=y
# CONFIG_LBDAF is not setCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_CMDLINE_PARSER=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=yCONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not setCONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not setCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_CMDLINE_PARTITION=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not setCONFIG_DEFAULT_NOOP=yCONFIG_DEFAULT_IOSCHED="noop"CONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP is not set
# CONFIG_X86_MPPARSE is not set CONFIG_GOLDFISH=y CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_GOLDFISH=y
# CONFIG_X86_INTEL_CE is not set CONFIG_X86_WANT_INTEL_MID=y
# CONFIG_X86_RDC321X is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_X86_32_IRIS=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_KVMTOOL_TEST_ENABLE=y CONFIG_HYPERVISOR_GUEST=y
# CONFIG_PARAVIRT is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set CONFIG_MGEODE_LX=y
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set CONFIG_X86_INTERNODE_CACHE_SHIFT=5 CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_CYRIX_32 is not set
# CONFIG_CPU_SUP_AMD is not set CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_DMI is not setCONFIG_NR_CPUS=1CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set CONFIG_X86_ANCIENT_MCE=y CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=yCONFIG_VM86=y
# CONFIG_TOSHIBA is not setCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
# CONFIG_X86_MSR is not set CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set CONFIG_VMSPLIT_3G_OPT=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xB0000000 CONFIG_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=yCONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0
# CONFIG_BOUNCE is not set CONFIG_NEED_BOUNCE_POOL=y CONFIG_VIRT_TO_BUS=yCONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_HWPOISON_INJECT=y CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not set
# CONFIG_ZBUD is not setCONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW=64 CONFIG_MATH_EMULATION=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
# CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set CONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#CONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_PM_SLEEP=yCONFIG_PM_AUTOSLEEP=yCONFIG_PM_WAKELOCKS=yCONFIG_PM_WAKELOCKS_LIMIT=100CONFIG_PM_WAKELOCKS_GC=yCONFIG_PM_RUNTIME=yCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=yCONFIG_PM_TRACE=yCONFIG_PM_TRACE_RTC=yCONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ACPI is not setCONFIG_SFI=y
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not setCONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not setCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not setCONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not setCONFIG_PCI_ATS=yCONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not setCONFIG_PCI_PASID=y
#
# PCI host controller drivers
#CONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not setCONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
# CONFIG_ALIX is not setCONFIG_NET5501=yCONFIG_PCCARD=yCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not setCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=yCONFIG_I82092=yCONFIG_I82365=yCONFIG_TCIC=yCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not setCONFIG_HOTPLUG_PCI_CPCI_GENERIC=yCONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_RAPIDIO is not setCONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_BINFMT_SCRIPT is not setCONFIG_HAVE_AOUT=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=yCONFIG_COREDUMP=yCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_DIAG=yCONFIG_UNIX=yCONFIG_UNIX_DIAG=yCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not setCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE_DEMUX=yCONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not setCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not setCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=yCONFIG_INET_AH=yCONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not setCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not setCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not setCONFIG_INET6_AH=yCONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not setCONFIG_INET6_TUNNEL=yCONFIG_INET6_XFRM_MODE_TRANSPORT=yCONFIG_INET6_XFRM_MODE_TUNNEL=yCONFIG_INET6_XFRM_MODE_BEET=yCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=yCONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not setCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=yCONFIG_IPV6_GRE=y
# CONFIG_IPV6_MULTIPLE_TABLES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not setCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=yCONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_NETLINK_ACCT=yCONFIG_NETFILTER_NETLINK_QUEUE=yCONFIG_NETFILTER_NETLINK_LOG=yCONFIG_NF_CONNTRACK=yCONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not setCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CONNTRACK_TIMEOUT=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not setCONFIG_NF_CONNTRACK_LABELS=y
# CONFIG_NF_CT_PROTO_DCCP is not setCONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CT_PROTO_UDPLITE is not setCONFIG_NF_CONNTRACK_AMANDA=yCONFIG_NF_CONNTRACK_FTP=yCONFIG_NF_CONNTRACK_H323=yCONFIG_NF_CONNTRACK_IRC=yCONFIG_NF_CONNTRACK_BROADCAST=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not setCONFIG_NF_CONNTRACK_SNMP=y
# CONFIG_NF_CONNTRACK_PPTP is not setCONFIG_NF_CONNTRACK_SANE=yCONFIG_NF_CONNTRACK_SIP=y
# CONFIG_NF_CONNTRACK_TFTP is not setCONFIG_NF_CT_NETLINK=y
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not setCONFIG_NETFILTER_SYNPROXY=yCONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=yCONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=yCONFIG_NETFILTER_XT_TARGET_CHECKSUM=yCONFIG_NETFILTER_XT_TARGET_CLASSIFY=yCONFIG_NETFILTER_XT_TARGET_CONNMARK=yCONFIG_NETFILTER_XT_TARGET_CT=yCONFIG_NETFILTER_XT_TARGET_DSCP=yCONFIG_NETFILTER_XT_TARGET_HL=yCONFIG_NETFILTER_XT_TARGET_HMARK=yCONFIG_NETFILTER_XT_TARGET_IDLETIMER=yCONFIG_NETFILTER_XT_TARGET_LED=yCONFIG_NETFILTER_XT_TARGET_LOG=yCONFIG_NETFILTER_XT_TARGET_MARK=yCONFIG_NETFILTER_XT_TARGET_NFLOG=yCONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not setCONFIG_NETFILTER_XT_TARGET_RATEEST=yCONFIG_NETFILTER_XT_TARGET_TEE=yCONFIG_NETFILTER_XT_TARGET_TPROXY=yCONFIG_NETFILTER_XT_TARGET_TRACE=yCONFIG_NETFILTER_XT_TARGET_SECMARK=yCONFIG_NETFILTER_XT_TARGET_TCPMSS=yCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not setCONFIG_NETFILTER_XT_MATCH_CLUSTER=y
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not setCONFIG_NETFILTER_XT_MATCH_CONNBYTES=yCONFIG_NETFILTER_XT_MATCH_CONNLABEL=yCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not setCONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not setCONFIG_NETFILTER_XT_MATCH_ECN=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not setCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=yCONFIG_NETFILTER_XT_MATCH_HELPER=yCONFIG_NETFILTER_XT_MATCH_HL=yCONFIG_NETFILTER_XT_MATCH_IPRANGE=yCONFIG_NETFILTER_XT_MATCH_IPVS=y
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not setCONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not setCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_MULTIPORT=yCONFIG_NETFILTER_XT_MATCH_NFACCT=y
# CONFIG_NETFILTER_XT_MATCH_OSF is not setCONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not setCONFIG_NETFILTER_XT_MATCH_PKTTYPE=yCONFIG_NETFILTER_XT_MATCH_QUOTA=yCONFIG_NETFILTER_XT_MATCH_RATEEST=yCONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not setCONFIG_NETFILTER_XT_MATCH_STRING=yCONFIG_NETFILTER_XT_MATCH_TCPMSS=yCONFIG_NETFILTER_XT_MATCH_TIME=yCONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_SET is not setCONFIG_IP_VS=yCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_AH_ESP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not setCONFIG_IP_VS_WRR=yCONFIG_IP_VS_LC=y
# CONFIG_IP_VS_WLC is not setCONFIG_IP_VS_LBLC=yCONFIG_IP_VS_LBLCR=yCONFIG_IP_VS_DH=yCONFIG_IP_VS_SH=yCONFIG_IP_VS_SED=yCONFIG_IP_VS_NQ=y
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
# CONFIG_IP_VS_NFCT is not set
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_CONNTRACK_IPV4 is not setCONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not setCONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_RPFILTER is not setCONFIG_IP_NF_MATCH_TTL=yCONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not setCONFIG_IP_NF_TARGET_SYNPROXY=yCONFIG_IP_NF_TARGET_ULOG=yCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_ECN=y
# CONFIG_IP_NF_TARGET_TTL is not setCONFIG_IP_NF_RAW=yCONFIG_IP_NF_SECURITY=y
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_CONNTRACK_IPV6 is not setCONFIG_IP6_NF_IPTABLES=yCONFIG_IP6_NF_MATCH_AH=yCONFIG_IP6_NF_MATCH_EUI64=yCONFIG_IP6_NF_MATCH_FRAG=y
# CONFIG_IP6_NF_MATCH_OPTS is not setCONFIG_IP6_NF_MATCH_HL=yCONFIG_IP6_NF_MATCH_IPV6HEADER=yCONFIG_IP6_NF_MATCH_MH=yCONFIG_IP6_NF_MATCH_RPFILTER=y
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_HL is not setCONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_TARGET_REJECT is not setCONFIG_IP6_NF_TARGET_SYNPROXY=yCONFIG_IP6_NF_MANGLE=yCONFIG_IP6_NF_RAW=y
# CONFIG_IP6_NF_SECURITY is not set
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=yCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=yCONFIG_IP_DCCP_CCID3_DEBUG=yCONFIG_IP_DCCP_TFRC_LIB=yCONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not setCONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not setCONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not setCONFIG_TIPC=yCONFIG_TIPC_PORTS=8191
# CONFIG_TIPC_MEDIA_IB is not setCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=yCONFIG_ATM_MPOA=yCONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not setCONFIG_STP=yCONFIG_GARP=y
# CONFIG_BRIDGE is not setCONFIG_HAVE_NET_DSA=yCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not setCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=yCONFIG_IPX=yCONFIG_IPX_INTERN=yCONFIG_ATALK=yCONFIG_DEV_APPLETALK=yCONFIG_LTPC=y
# CONFIG_COPS is not setCONFIG_IPDDP=yCONFIG_IPDDP_ENCAP=yCONFIG_X25=yCONFIG_LAPB=yCONFIG_PHONET=yCONFIG_IEEE802154=yCONFIG_IEEE802154_6LOWPAN=yCONFIG_MAC802154=y
# CONFIG_NET_SCHED is not setCONFIG_DCB=yCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not setCONFIG_VSOCKETS=yCONFIG_VMWARE_VMCI_VSOCKETS=yCONFIG_NETLINK_MMAP=yCONFIG_NETLINK_DIAG=yCONFIG_NET_MPLS_GSO=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=yCONFIG_ROSE=y
#
# AX.25 network device drivers
#CONFIG_MKISS=yCONFIG_6PACK=yCONFIG_BPQETHER=yCONFIG_DMASCC=yCONFIG_SCC=yCONFIG_SCC_DELAY=yCONFIG_SCC_TRXECHO=yCONFIG_BAYCOM_SER_FDX=yCONFIG_BAYCOM_SER_HDX=yCONFIG_BAYCOM_PAR=yCONFIG_BAYCOM_EPP=yCONFIG_YAM=yCONFIG_CAN=y
# CONFIG_CAN_RAW is not setCONFIG_CAN_BCM=yCONFIG_CAN_GW=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not setCONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not setCONFIG_CAN_LEDS=y
# CONFIG_CAN_JANZ_ICAN3 is not setCONFIG_PCH_CAN=yCONFIG_CAN_GRCAN=yCONFIG_CAN_SJA1000=yCONFIG_CAN_SJA1000_ISA=yCONFIG_CAN_SJA1000_PLATFORM=y
# CONFIG_CAN_SJA1000_OF_PLATFORM is not setCONFIG_CAN_EMS_PCMCIA=yCONFIG_CAN_EMS_PCI=yCONFIG_CAN_PEAK_PCMCIA=yCONFIG_CAN_PEAK_PCI=y
# CONFIG_CAN_PEAK_PCIEC is not set
# CONFIG_CAN_KVASER_PCI is not setCONFIG_CAN_PLX_PCI=yCONFIG_CAN_TSCAN1=y
# CONFIG_CAN_C_CAN is not setCONFIG_CAN_CC770=yCONFIG_CAN_CC770_ISA=yCONFIG_CAN_CC770_PLATFORM=y
#
# CAN USB interfaces
#
# CONFIG_CAN_EMS_USB is not setCONFIG_CAN_ESD_USB2=yCONFIG_CAN_KVASER_USB=y
# CONFIG_CAN_PEAK_USB is not setCONFIG_CAN_8DEV_USB=yCONFIG_CAN_SOFTING=y
# CONFIG_CAN_SOFTING_CS is not setCONFIG_CAN_DEBUG_DEVICES=yCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=y
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not setCONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#
# CONFIG_DONGLE is not setCONFIG_KINGSUN_DONGLE=y
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not setCONFIG_NSC_FIR=y
# CONFIG_WINBOND_FIR is not setCONFIG_TOSHIBA_FIR=yCONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not setCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_MCS_FIR=yCONFIG_BT=yCONFIG_BT_RFCOMM=yCONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not setCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not setCONFIG_BT_HCIBTSDIO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not setCONFIG_BT_HCIBFUSB=yCONFIG_BT_HCIDTL1=yCONFIG_BT_HCIBT3C=y
# CONFIG_BT_HCIBLUECARD is not setCONFIG_BT_HCIBTUART=yCONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not setCONFIG_BT_WILINK=yCONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not setCONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not setCONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not setCONFIG_CFG80211_WEXT=yCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=yCONFIG_LIB80211_DEBUG=yCONFIG_MAC80211=y
# CONFIG_MAC80211_RC_PID is not set
# CONFIG_MAC80211_RC_MINSTREL is not setCONFIG_MAC80211_RC_DEFAULT=""
#
# Some wireless drivers require a rate control algorithm #
# CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set CONFIG_MAC80211_DEBUG_MENU=y CONFIG_MAC80211_NOINLINE=y
# CONFIG_MAC80211_VERBOSE_DEBUG is not set CONFIG_MAC80211_MLME_DEBUG=y
# CONFIG_MAC80211_STA_DEBUG is not set CONFIG_MAC80211_HT_DEBUG=y CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_PS_DEBUG is not set CONFIG_MAC80211_TDLS_DEBUG=y CONFIG_MAC80211_DEBUG_COUNTERS=yCONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set CONFIG_NET_9P=yCONFIG_NET_9P_VIRTIO=yCONFIG_NET_9P_RDMA=yCONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not setCONFIG_CEPH_LIB=yCONFIG_CEPH_LIB_PRETTYDEBUG=y CONFIG_CEPH_LIB_USE_DNS_RESOLVER=yCONFIG_NFC=yCONFIG_NFC_NCI=yCONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_PN533 is not setCONFIG_NFC_WILINK=y
# CONFIG_NFC_SIM is not setCONFIG_NFC_PN544=yCONFIG_NFC_MICROREAD=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not setCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not setCONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_OF_SELFTEST is not setCONFIG_OF_PROMTREE=yCONFIG_OF_ADDRESS=yCONFIG_OF_IRQ=yCONFIG_OF_NET=yCONFIG_OF_MDIO=yCONFIG_OF_PCI=yCONFIG_OF_PCI_IRQ=yCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_PC_FIFO is not setCONFIG_PARPORT_PC_SUPERIO=yCONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=yCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_ISAPNP=yCONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
# CONFIG_PNPACPI is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not setCONFIG_BLK_DEV_PCIESSD_MTIP32XX=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_NVME is not setCONFIG_BLK_DEV_OSD=yCONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_RAM is not setCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not setCONFIG_DUMMY_IRQ=yCONFIG_IBM_ASM=yCONFIG_PHANTOM=yCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=yCONFIG_TIFM_7XX1=yCONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not setCONFIG_ENCLOSURE_SERVICES=yCONFIG_CS5535_MFGPT=yCONFIG_CS5535_MFGPT_DEFAULT_IRQ=7CONFIG_CS5535_CLOCK_EVENT_SRC=yCONFIG_HP_ILO=y
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not setCONFIG_ISL29020=yCONFIG_SENSORS_TSL2550=yCONFIG_SENSORS_BH1780=y
# CONFIG_SENSORS_BH1770 is not setCONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not setCONFIG_DS1682=y
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not setCONFIG_USB_SWITCH_FSA9480=y
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not setCONFIG_EEPROM_93CX6=yCONFIG_CB710_CORE=yCONFIG_CB710_DEBUG=yCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #CONFIG_TI_ST=y
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not setCONFIG_VMWARE_VMCI=yCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not setCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not setCONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_SRP_TGT_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=yCONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not setCONFIG_SCSI_CXGB4_ISCSI=y
# CONFIG_SCSI_BNX2_ISCSI is not setCONFIG_SCSI_BNX2X_FCOE=yCONFIG_BE2ISCSI=yCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_HPSA=yCONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not setCONFIG_SCSI_7000FASST=y
# CONFIG_SCSI_ACARD is not setCONFIG_SCSI_AHA152X=y
# CONFIG_SCSI_AHA1542 is not setCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not setCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not setCONFIG_SCSI_IN2000=yCONFIG_SCSI_ARCMSR=yCONFIG_SCSI_ESAS2R=y
# CONFIG_MEGARAID_NEWGEN is not setCONFIG_MEGARAID_LEGACY=yCONFIG_MEGARAID_SAS=yCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not setCONFIG_SCSI_MPT3SAS=yCONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT3SAS_LOGGING is not setCONFIG_SCSI_UFSHCD=yCONFIG_SCSI_UFSHCD_PCI=yCONFIG_SCSI_UFSHCD_PLATFORM=yCONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not setCONFIG_VMWARE_PVSCSI=yCONFIG_LIBFC=yCONFIG_LIBFCOE=y
# CONFIG_FCOE is not setCONFIG_FCOE_FNIC=yCONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_DTC3280 is not setCONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not setCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=yCONFIG_SCSI_GDTH=y
# CONFIG_SCSI_ISCI is not setCONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_GENERIC_NCR53C400 is not setCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=yCONFIG_SCSI_INIA100=y
# CONFIG_SCSI_PPA is not setCONFIG_SCSI_IMM=y
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_NCR53C406A=yCONFIG_SCSI_STEX=yCONFIG_SCSI_SYM53C8XX_2=yCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not setCONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not setCONFIG_SCSI_QLOGIC_1280=yCONFIG_SCSI_QLA_FC=yCONFIG_TCM_QLA2XXX=yCONFIG_SCSI_QLA_ISCSI=yCONFIG_SCSI_LPFC=yCONFIG_SCSI_LPFC_DEBUG_FS=yCONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=yCONFIG_SCSI_T128=y
# CONFIG_SCSI_U14_34F is not setCONFIG_SCSI_ULTRASTOR=yCONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not setCONFIG_SCSI_PMCRAID=yCONFIG_SCSI_PM8001=y
# CONFIG_SCSI_SRP is not setCONFIG_SCSI_BFA_FC=yCONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=yCONFIG_SCSI_OSD_INITIATOR=yCONFIG_SCSI_OSD_ULD=yCONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=yCONFIG_SATA_AHCI_PLATFORM=yCONFIG_AHCI_IMX=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not setCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not setCONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not setCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=yCONFIG_SATA_HIGHBANK=yCONFIG_SATA_MV=yCONFIG_SATA_NV=yCONFIG_SATA_PROMISE=y
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not setCONFIG_SATA_SIS=yCONFIG_SATA_SVW=yCONFIG_SATA_ULI=yCONFIG_SATA_VIA=yCONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#CONFIG_PATA_ALI=yCONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not setCONFIG_PATA_ATP867X=yCONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not setCONFIG_PATA_CS5535=yCONFIG_PATA_CS5536=y
# CONFIG_PATA_CYPRESS is not setCONFIG_PATA_EFAR=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not setCONFIG_PATA_IT821X=yCONFIG_PATA_JMICRON=yCONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not setCONFIG_PATA_NINJA32=y
# CONFIG_PATA_NS87415 is not setCONFIG_PATA_OLDPIIX=yCONFIG_PATA_OPTIDMA=yCONFIG_PATA_PDC2027X=yCONFIG_PATA_PDC_OLD=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RDC=yCONFIG_PATA_SC1200=yCONFIG_PATA_SCH=yCONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=yCONFIG_PATA_TOSHIBA=yCONFIG_PATA_TRIFLEX=yCONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#CONFIG_PATA_CMD640_PCI=yCONFIG_PATA_ISAPNP=yCONFIG_PATA_MPIIX=yCONFIG_PATA_NS87410=yCONFIG_PATA_OPTI=y
# CONFIG_PATA_PCMCIA is not setCONFIG_PATA_PLATFORM=yCONFIG_PATA_OF_PLATFORM=y
# CONFIG_PATA_QDI is not setCONFIG_PATA_RZ1000=yCONFIG_PATA_WINBOND_VLB=y
#
# Generic fallback / legacy drivers
#CONFIG_ATA_GENERIC=yCONFIG_PATA_LEGACY=y
# CONFIG_MD is not setCONFIG_TARGET_CORE=yCONFIG_TCM_IBLOCK=yCONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not setCONFIG_LOOPBACK_TARGET=y
# CONFIG_TCM_FC is not setCONFIG_ISCSI_TARGET=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not setCONFIG_FIREWIRE_NOSY=yCONFIG_I2O=yCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not setCONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not setCONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not setCONFIG_I2O_SCSI=yCONFIG_I2O_PROC=y
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=yCONFIG_BONDING=y
# CONFIG_DUMMY is not setCONFIG_EQUALIZER=yCONFIG_NET_FC=yCONFIG_NET_TEAM=yCONFIG_NET_TEAM_MODE_BROADCAST=yCONFIG_NET_TEAM_MODE_ROUNDROBIN=yCONFIG_NET_TEAM_MODE_RANDOM=yCONFIG_NET_TEAM_MODE_ACTIVEBACKUP=yCONFIG_NET_TEAM_MODE_LOADBALANCE=yCONFIG_MACVLAN=yCONFIG_MACVTAP=yCONFIG_VXLAN=yCONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not setCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not setCONFIG_VIRTIO_NET=yCONFIG_NLMON=yCONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=y
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not setCONFIG_ATM_ENI=y
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not setCONFIG_ATM_ZATM=yCONFIG_ATM_ZATM_DEBUG=yCONFIG_ATM_NICSTAR=yCONFIG_ATM_NICSTAR_USE_SUNI=yCONFIG_ATM_NICSTAR_USE_IDT77105=yCONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not setCONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not setCONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=y
# CONFIG_ATM_HE_USE_SUNI is not setCONFIG_ATM_SOLOS=y
#
# CAIF transport drivers
#CONFIG_VHOST_NET=yCONFIG_VHOST_RING=yCONFIG_VHOST=y
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not setCONFIG_ETHERNET=yCONFIG_MDIO=yCONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_PCMCIA_3C574 is not setCONFIG_PCMCIA_3C589=yCONFIG_VORTEX=yCONFIG_TYPHOON=yCONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_NET_VENDOR_ALTEON is not setCONFIG_NET_VENDOR_AMD=yCONFIG_AMD8111_ETH=y
# CONFIG_LANCE is not setCONFIG_PCNET32=yCONFIG_PCMCIA_NMCLAN=y
# CONFIG_NI65 is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_CADENCE is not setCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_BNX2=yCONFIG_CNIC=yCONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not setCONFIG_NET_VENDOR_CHELSIO=yCONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
# CONFIG_CHELSIO_T3 is not setCONFIG_CHELSIO_T4=y
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not setCONFIG_DNET=yCONFIG_NET_VENDOR_DEC=yCONFIG_NET_TULIP=yCONFIG_DE2104X=yCONFIG_DE2104X_DSL=0CONFIG_TULIP=yCONFIG_TULIP_MWI=yCONFIG_TULIP_MMIO=yCONFIG_TULIP_NAPI=y
# CONFIG_TULIP_NAPI_HW_MITIGATION is not setCONFIG_DE4X5=yCONFIG_WINBOND_840=yCONFIG_DM9102=yCONFIG_ULI526X=y
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not setCONFIG_NET_VENDOR_EXAR=yCONFIG_S2IO=y
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_FUJITSU is not setCONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not setCONFIG_JME=y
# CONFIG_NET_VENDOR_MARVELL is not setCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=y
# CONFIG_MLX4_EN_DCB is not setCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=yCONFIG_MLX5_CORE=yCONFIG_NET_VENDOR_MICREL=yCONFIG_KS8851_MLL=yCONFIG_KSZ884X_PCI=y
# CONFIG_NET_VENDOR_MYRI is not setCONFIG_FEALNX=yCONFIG_NET_VENDOR_NATSEMI=yCONFIG_NATSEMI=y
# CONFIG_NS83820 is not setCONFIG_NET_VENDOR_8390=yCONFIG_PCMCIA_AXNET=yCONFIG_NE2000=yCONFIG_NE2K_PCI=yCONFIG_PCMCIA_PCNET=y
# CONFIG_ULTRA is not set
CONFIG_WD80x3=yCONFIG_NET_VENDOR_NVIDIA=yCONFIG_FORCEDETH=y
# CONFIG_NET_VENDOR_OKI is not setCONFIG_ETHOC=yCONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not setCONFIG_YELLOWFIN=y
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not setCONFIG_SH_ETH=y
# CONFIG_NET_VENDOR_RDC is not setCONFIG_NET_VENDOR_SEEQ=y
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not setCONFIG_NET_VENDOR_SMSC=yCONFIG_SMC9194=y
# CONFIG_PCMCIA_SMC91C92 is not setCONFIG_EPIC100=y
# CONFIG_SMSC911X is not setCONFIG_SMSC9420=yCONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not setCONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not setCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NIU=yCONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not setCONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not setCONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not setCONFIG_NET_VENDOR_XIRCOM=yCONFIG_PCMCIA_XIRC2PS=yCONFIG_FDDI=y
# CONFIG_DEFXX is not setCONFIG_SKFP=yCONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not set
# CONFIG_NET_SB1000 is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_AT803X_PHY=y
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not setCONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not setCONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not setCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=yCONFIG_BCM87XX_PHY=yCONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not setCONFIG_NATIONAL_PHY=yCONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=yCONFIG_MICREL_PHY=y
# CONFIG_FIXED_PHY is not setCONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not setCONFIG_MDIO_BUS_MUX=yCONFIG_MDIO_BUS_MUX_GPIO=yCONFIG_MDIO_BUS_MUX_MMIOREG=y
# CONFIG_PLIP is not set
# CONFIG_PPP is not setCONFIG_SLIP=yCONFIG_SLHC=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=yCONFIG_USB_RTL8152=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_AX88179_178A=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_CDC_NCM=yCONFIG_USB_NET_CDC_MBIM=yCONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not setCONFIG_USB_NET_SMSC75XX=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=yCONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not setCONFIG_USB_NET_RNDIS_HOST=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not setCONFIG_USB_NET_ZAURUS=yCONFIG_USB_NET_CX82310_ETH=yCONFIG_USB_NET_KALMIA=yCONFIG_USB_NET_QMI_WWAN=yCONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not setCONFIG_USB_IPHETH=y
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not setCONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not setCONFIG_LIBERTAS_THINFIRM=yCONFIG_LIBERTAS_THINFIRM_DEBUG=y
# CONFIG_LIBERTAS_THINFIRM_USB is not set
# CONFIG_AIRO is not setCONFIG_ATMEL=y
# CONFIG_PCI_ATMEL is not set
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_AT76C50X_USB is not setCONFIG_AIRO_CS=yCONFIG_PCMCIA_WL3501=yCONFIG_PRISM54=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not setCONFIG_RTL8180=y
# CONFIG_RTL8187 is not setCONFIG_ADM8211=y
# CONFIG_MAC80211_HWSIM is not setCONFIG_MWL8K=yCONFIG_ATH_COMMON=yCONFIG_ATH_CARDS=y
# CONFIG_ATH_DEBUG is not setCONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not setCONFIG_ATH5K_PCI=yCONFIG_ATH9K_HW=yCONFIG_ATH9K_COMMON=y
# CONFIG_ATH9K_BTCOEX_SUPPORT is not setCONFIG_ATH9K=yCONFIG_ATH9K_PCI=yCONFIG_ATH9K_AHB=yCONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not setCONFIG_ATH9K_HTC=yCONFIG_ATH9K_HTC_DEBUGFS=yCONFIG_CARL9170=y
# CONFIG_CARL9170_LEDS is not setCONFIG_CARL9170_DEBUGFS=yCONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not setCONFIG_ATH6KL=yCONFIG_ATH6KL_SDIO=yCONFIG_ATH6KL_USB=yCONFIG_ATH6KL_DEBUG=y
# CONFIG_ATH6KL_TRACING is not set
# CONFIG_AR5523 is not setCONFIG_WIL6210=yCONFIG_WIL6210_ISR_COR=yCONFIG_WIL6210_TRACING=yCONFIG_ATH10K=y
# CONFIG_ATH10K_PCI is not set
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not setCONFIG_BRCMUTIL=yCONFIG_BRCMFMAC=yCONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_USB is not setCONFIG_BRCM_TRACING=y
# CONFIG_BRCMDBG is not setCONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not setCONFIG_HOSTAP_PCI=yCONFIG_HOSTAP_CS=yCONFIG_IPW2100=y
# CONFIG_IPW2100_MONITOR is not setCONFIG_IPW2100_DEBUG=yCONFIG_IPW2200=yCONFIG_IPW2200_MONITOR=y
# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPW2200_PROMISCUOUS is not setCONFIG_IPW2200_QOS=yCONFIG_IPW2200_DEBUG=yCONFIG_LIBIPW=y
# CONFIG_LIBIPW_DEBUG is not setCONFIG_IWLWIFI=yCONFIG_IWLDVM=yCONFIG_IWLMVM=y
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not setCONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not setCONFIG_IWLEGACY=yCONFIG_IWL4965=yCONFIG_IWL3945=y
#
# iwl3945 / iwl4965 Debugging Options # # CONFIG_IWLEGACY_DEBUG is not set # CONFIG_IWLEGACY_DEBUGFS is not set # CONFIG_LIBERTAS is not set CONFIG_HERMES=y CONFIG_HERMES_PRISM=y # CONFIG_HERMES_CACHE_FW_ON_INIT is not set CONFIG_PLX_HERMES=y # CONFIG_TMD_HERMES is not set # CONFIG_NORTEL_HERMES is not set # CONFIG_PCI_HERMES is not set CONFIG_PCMCIA_HERMES=y CONFIG_PCMCIA_SPECTRUM=y # CONFIG_ORINOCO_USB is not set CONFIG_P54_COMMON=y # CONFIG_P54_USB is not set # CONFIG_P54_PCI is not set CONFIG_P54_LEDS=y CONFIG_RT2X00=y # CONFIG_RT2400PCI is not set CONFIG_RT2500PCI=y CONFIG_RT61PCI=y CONFIG_RT2800PCI=y CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y # CONFIG_RT2800PCI_RT3290 is not set # CONFIG_RT2500USB is not set # CONFIG_RT73USB is not set CONFIG_RT2800USB=y # CONFIG_RT2800USB_RT33XX is not set # CONFIG_RT2800USB_RT35XX is not set # CONFIG_RT2800USB_RT3573 is not set CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_RT55XX=y # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=y CONFIG_RT2X00_LIB_MMIO=y CONFIG_RT2X00_LIB_PCI=y CONFIG_RT2X00_LIB_USB=y CONFIG_RT2X00_LIB=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_LIB_DEBUGFS is not set CONFIG_RT2X00_DEBUG=y CONFIG_RTL_CARDS=y # CONFIG_RTL8192CE is not set CONFIG_RTL8192SE=y # CONFIG_RTL8192DE is not set CONFIG_RTL8723AE=y CONFIG_RTL8188EE=y CONFIG_RTL8192CU=y CONFIG_RTLWIFI=y CONFIG_RTLWIFI_PCI=y CONFIG_RTLWIFI_USB=y CONFIG_RTLWIFI_DEBUG=y CONFIG_RTL8192C_COMMON=y CONFIG_WL_TI=y CONFIG_WL1251=y # CONFIG_WL1251_SDIO is not set CONFIG_WL12XX=y # CONFIG_WL18XX is not set CONFIG_WLCORE=y # CONFIG_WLCORE_SDIO is not set CONFIG_ZD1211RW=y CONFIG_ZD1211RW_DEBUG=y # CONFIG_MWIFIEX is not set CONFIG_CW1200=y CONFIG_CW1200_WLAN_SDIO=y
#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not setCONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not setCONFIG_LAPBETHER=yCONFIG_X25_ASY=y
# CONFIG_SBNI is not set
# CONFIG_IEEE802154_DRIVERS is not setCONFIG_VMXNET3=y
# CONFIG_ISDN is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=yCONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5588=yCONFIG_KEYBOARD_ADP5589=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not setCONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_GPIO=yCONFIG_KEYBOARD_GPIO_POLLED=yCONFIG_KEYBOARD_TCA6416=yCONFIG_KEYBOARD_TCA8418=yCONFIG_KEYBOARD_MATRIX=yCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_LM8333=yCONFIG_KEYBOARD_MAX7359=yCONFIG_KEYBOARD_MCS=yCONFIG_KEYBOARD_MPR121=yCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_OPENCORES=yCONFIG_KEYBOARD_GOLDFISH_EVENTS=yCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_SUNKBD=yCONFIG_KEYBOARD_TC3589X=yCONFIG_KEYBOARD_TWL4030=yCONFIG_KEYBOARD_XTKBD=yCONFIG_KEYBOARD_CROS_EC=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not setCONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not setCONFIG_TOUCHSCREEN_CY8CTMG110=yCONFIG_TOUCHSCREEN_CYTTSP_CORE=yCONFIG_TOUCHSCREEN_CYTTSP_I2C=y
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not setCONFIG_TOUCHSCREEN_DA9034=yCONFIG_TOUCHSCREEN_DYNAPRO=yCONFIG_TOUCHSCREEN_HAMPSHIRE=yCONFIG_TOUCHSCREEN_EETI=yCONFIG_TOUCHSCREEN_EGALAX=yCONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_ILI210X is not setCONFIG_TOUCHSCREEN_GUNZE=yCONFIG_TOUCHSCREEN_ELO=yCONFIG_TOUCHSCREEN_WACOM_W8001=yCONFIG_TOUCHSCREEN_WACOM_I2C=yCONFIG_TOUCHSCREEN_MAX11801=yCONFIG_TOUCHSCREEN_MCS5000=yCONFIG_TOUCHSCREEN_MMS114=yCONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_INEXIO is not setCONFIG_TOUCHSCREEN_MK712=yCONFIG_TOUCHSCREEN_HTCPEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not setCONFIG_TOUCHSCREEN_TOUCHRIGHT=yCONFIG_TOUCHSCREEN_TOUCHWIN=yCONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_PIXCIR is not setCONFIG_TOUCHSCREEN_WM831X=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_USB_EGALAX is not setCONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not setCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not setCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
# CONFIG_TOUCHSCREEN_USB_ELO is not set
# CONFIG_TOUCHSCREEN_USB_E2I is not set
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
# CONFIG_TOUCHSCREEN_USB_NEXIO is not setCONFIG_TOUCHSCREEN_USB_EASYTOUCH=yCONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not setCONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_ST1232 is not setCONFIG_TOUCHSCREEN_TPS6507X=yCONFIG_INPUT_MISC=yCONFIG_INPUT_88PM860X_ONKEY=y
# CONFIG_INPUT_88PM80X_ONKEY is not setCONFIG_INPUT_AD714X=y
# CONFIG_INPUT_AD714X_I2C is not setCONFIG_INPUT_BMA150=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not setCONFIG_INPUT_MPU3050=y
# CONFIG_INPUT_APANEL is not setCONFIG_INPUT_GP2A=yCONFIG_INPUT_GPIO_TILT_POLLED=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not setCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not setCONFIG_INPUT_POWERMATE=y
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not setCONFIG_INPUT_TWL4030_PWRBUTTON=yCONFIG_INPUT_TWL4030_VIBRA=yCONFIG_INPUT_TWL6040_VIBRA=yCONFIG_INPUT_UINPUT=yCONFIG_INPUT_PCF50633_PMU=yCONFIG_INPUT_PCF8574=y
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not setCONFIG_INPUT_WM831X_ON=yCONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not setCONFIG_INPUT_IDEAPAD_SLIDEBAR=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_SERIO_ALTERA_PS2=yCONFIG_SERIO_PS2MULT=yCONFIG_SERIO_ARC_PS2=yCONFIG_SERIO_APBPS2=yCONFIG_SERIO_OLPC_APSP=yCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not setCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_NOZOMI=yCONFIG_N_GSM=y
# CONFIG_TRACE_SINK is not set
# CONFIG_GOLDFISH_TTY is not setCONFIG_DEVKMEM=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_PNP is not setCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not setCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=yCONFIG_SERIAL_8250_DW=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_KGDB_NMI=yCONFIG_SERIAL_MFD_HSU=yCONFIG_SERIAL_MFD_HSU_CONSOLE=yCONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_SCCNXP is not setCONFIG_SERIAL_TIMBERDALE=yCONFIG_SERIAL_ALTERA_JTAGUART=yCONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=yCONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=yCONFIG_SERIAL_ALTERA_UART=yCONFIG_SERIAL_ALTERA_UART_MAXPORTS=4CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not setCONFIG_SERIAL_PCH_UART=yCONFIG_SERIAL_PCH_UART_CONSOLE=yCONFIG_SERIAL_XILINX_PS_UART=yCONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not setCONFIG_SERIAL_RP2=yCONFIG_SERIAL_RP2_NR_UARTS=32CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not setCONFIG_SERIAL_ST_ASC=y
# CONFIG_SERIAL_ST_ASC_CONSOLE is not set
# CONFIG_TTY_PRINTK is not setCONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=yCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=yCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=yCONFIG_IPMI_DEVICE_INTERFACE=yCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=yCONFIG_HW_RANDOM_VIA=yCONFIG_HW_RANDOM_VIRTIO=yCONFIG_HW_RANDOM_TPM=y
# CONFIG_NVRAM is not setCONFIG_DTLK=y
# CONFIG_R3964 is not setCONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=yCONFIG_CARDMAN_4000=yCONFIG_CARDMAN_4040=y
# CONFIG_IPWIRELESS is not setCONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=yCONFIG_TCG_TIS=yCONFIG_TCG_TIS_I2C_INFINEON=yCONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not setCONFIG_TCG_INFINEON=y
# CONFIG_TCG_ST33_I2C is not setCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not setCONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=yCONFIG_I2C_AMD756_S4882=y
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_ISMT=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=yCONFIG_I2C_NFORCE2_S4985=yCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not setCONFIG_I2C_VIA=yCONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PCI=yCONFIG_I2C_EG20T=yCONFIG_I2C_GPIO=yCONFIG_I2C_KEMPLD=y
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=yCONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_DIOLAN_U2C=yCONFIG_I2C_PARPORT=yCONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y
# CONFIG_I2C_VIPERBOARD is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_SCx200_ACB=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not setCONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not setCONFIG_HSI=yCONFIG_HSI_BOARDINFO=y
#
# HSI clients
#CONFIG_HSI_CHAR=y
#
# PPS support
#CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#CONFIG_PPS_CLIENT_KTIMER=yCONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_PARPORT is not setCONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_PCH is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIO_DEVRES=yCONFIG_GPIOLIB=yCONFIG_OF_GPIO=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=yCONFIG_GPIO_GENERIC=yCONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#CONFIG_GPIO_GENERIC_PLATFORM=yCONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_F7188X is not setCONFIG_GPIO_TS5500=yCONFIG_GPIO_SCH=yCONFIG_GPIO_ICH=yCONFIG_GPIO_VX855=yCONFIG_GPIO_GRGPIO=y
#
# I2C GPIO expanders:
#CONFIG_GPIO_MAX7300=yCONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not setCONFIG_GPIO_PCA953X=yCONFIG_GPIO_PCA953X_IRQ=yCONFIG_GPIO_PCF857X=yCONFIG_GPIO_SX150X=yCONFIG_GPIO_TC3589X=yCONFIG_GPIO_TWL4030=yCONFIG_GPIO_TWL6040=y
# CONFIG_GPIO_WM831X is not setCONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not setCONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not setCONFIG_GPIO_ADNP=y
#
# PCI GPIO expanders:
#CONFIG_GPIO_CS5535=yCONFIG_GPIO_BT8XX=yCONFIG_GPIO_AMD8111=yCONFIG_GPIO_LANGWELL=yCONFIG_GPIO_PCH=yCONFIG_GPIO_ML_IOH=yCONFIG_GPIO_SODAVILLE=yCONFIG_GPIO_TIMBERDALE=y
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#CONFIG_GPIO_MCP23S08=y
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#CONFIG_GPIO_KEMPLD=y
#
# MODULbus GPIO expanders:
#CONFIG_GPIO_JANZ_TTL=y
# CONFIG_GPIO_TPS65910 is not set
#
# USB GPIO expanders:
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not setCONFIG_WM8350_POWER=y
# CONFIG_TEST_POWER is not setCONFIG_BATTERY_88PM860X=y
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_OLPC is not setCONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27x00=y
# CONFIG_BATTERY_BQ27X00_I2C is not set
# CONFIG_BATTERY_BQ27X00_PLATFORM is not setCONFIG_BATTERY_DA9030=yCONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not setCONFIG_BATTERY_TWL4030_MADC=yCONFIG_CHARGER_88PM860X=yCONFIG_CHARGER_PCF50633=yCONFIG_BATTERY_RX51=y
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not setCONFIG_CHARGER_TWL4030=yCONFIG_CHARGER_LP8727=yCONFIG_CHARGER_LP8788=yCONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_MAX8998 is not setCONFIG_CHARGER_BQ2415X=yCONFIG_CHARGER_BQ24190=yCONFIG_CHARGER_SMB347=yCONFIG_CHARGER_TPS65090=yCONFIG_BATTERY_GOLDFISH=y
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set CONFIG_SENSORS_AD7418=y CONFIG_SENSORS_ADM1021=y CONFIG_SENSORS_ADM1025=y CONFIG_SENSORS_ADM1026=y CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set CONFIG_SENSORS_ADM9240=y CONFIG_SENSORS_ADT7X10=y CONFIG_SENSORS_ADT7410=y CONFIG_SENSORS_ADT7411=y CONFIG_SENSORS_ADT7462=y CONFIG_SENSORS_ADT7470=y CONFIG_SENSORS_ADT7475=y CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set CONFIG_SENSORS_K10TEMP=y CONFIG_SENSORS_FAM15H_POWER=y CONFIG_SENSORS_ASB100=y CONFIG_SENSORS_ATXP1=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_DS1621=y CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set CONFIG_SENSORS_F71882FG=y CONFIG_SENSORS_F75375S=y CONFIG_SENSORS_FSCHMD=y CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=y CONFIG_SENSORS_HTU21=y CONFIG_SENSORS_CORETEMP=y CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set CONFIG_SENSORS_LINEAGE=y CONFIG_SENSORS_LM63=y CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set CONFIG_SENSORS_LM77=y CONFIG_SENSORS_LM78=y CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4261 is not set CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set CONFIG_SENSORS_MAX16065=y CONFIG_SENSORS_MAX1619=y CONFIG_SENSORS_MAX1668=y CONFIG_SENSORS_MAX197=y CONFIG_SENSORS_MAX6639=y CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set CONFIG_SENSORS_NCT6775=y CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set CONFIG_SENSORS_PCF8591=yCONFIG_PMBUS=yCONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_LM25066 is not set CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_MAX16064=y CONFIG_SENSORS_MAX34440=y CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_UCD9000 is not set CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_ZL6100=y CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set CONFIG_SENSORS_SIS5595=y CONFIG_SENSORS_SMM665=y CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not set CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set CONFIG_SENSORS_ADS1015=y CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set CONFIG_SENSORS_INA2XX=y CONFIG_SENSORS_THMC50=y CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TWL4030_MADC is not set CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set CONFIG_SENSORS_W83793=y CONFIG_SENSORS_W83795=y CONFIG_SENSORS_W83795_FANCTRL=y CONFIG_SENSORS_W83L785TS=y CONFIG_SENSORS_W83L786NG=y CONFIG_SENSORS_W83627HF=y CONFIG_SENSORS_W83627EHF=y CONFIG_SENSORS_WM831X=y CONFIG_SENSORS_WM8350=y CONFIG_SENSORS_APPLESMC=yCONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_THERMAL_EMULATION=y CONFIG_X86_PKG_TEMP_THERMAL=y
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not setCONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not setCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=yCONFIG_SSB_DRIVER_GPIO=yCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_CS5535=yCONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not setCONFIG_MFD_CROS_EC=yCONFIG_MFD_CROS_EC_I2C=yCONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_I2C is not setCONFIG_HTC_PASIC3=yCONFIG_HTC_I2CPLD=yCONFIG_LPC_ICH=yCONFIG_LPC_SCH=yCONFIG_MFD_JANZ_CMODIO=yCONFIG_MFD_KEMPLD=yCONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not setCONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX77686 is not setCONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not setCONFIG_MFD_MAX8998=yCONFIG_MFD_VIPERBOARD=y
# CONFIG_MFD_RETU is not setCONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not setCONFIG_PCF50633_GPIO=yCONFIG_MFD_RDC321X=yCONFIG_MFD_RTSX_PCI=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not setCONFIG_MFD_SI476X_CORE=yCONFIG_MFD_SM501=yCONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SMSC is not setCONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_STMPE is not setCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=yCONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not setCONFIG_TPS6105X=y
# CONFIG_TPS65010 is not setCONFIG_TPS6507X=yCONFIG_MFD_TPS65090=yCONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS6586X is not setCONFIG_MFD_TPS65910=yCONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not setCONFIG_TWL4030_CORE=yCONFIG_TWL4030_MADC=yCONFIG_MFD_TWL4030_AUDIO=yCONFIG_TWL6040_CORE=yCONFIG_MFD_WL1273_CORE=yCONFIG_MFD_LM3533=yCONFIG_MFD_TIMBERDALE=yCONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not setCONFIG_MFD_VX855=y
# CONFIG_MFD_ARIZONA_I2C is not setCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=yCONFIG_MFD_WM831X_I2C=yCONFIG_MFD_WM8350=yCONFIG_MFD_WM8350_I2C=yCONFIG_MFD_WM8994=yCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not setCONFIG_REGULATOR_FIXED_VOLTAGE=yCONFIG_REGULATOR_VIRTUAL_CONSUMER=yCONFIG_REGULATOR_USERSPACE_CONSUMER=yCONFIG_REGULATOR_88PM800=yCONFIG_REGULATOR_88PM8607=yCONFIG_REGULATOR_AD5398=yCONFIG_REGULATOR_ANATOP=yCONFIG_REGULATOR_AS3711=yCONFIG_REGULATOR_DA903X=yCONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_FAN53555 is not setCONFIG_REGULATOR_GPIO=yCONFIG_REGULATOR_ISL6271A=yCONFIG_REGULATOR_LP3971=yCONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not setCONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP8788 is not setCONFIG_REGULATOR_MAX1586=yCONFIG_REGULATOR_MAX8649=yCONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not setCONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX77693 is not setCONFIG_REGULATOR_PCF50633=yCONFIG_REGULATOR_PFUZE100=yCONFIG_REGULATOR_TPS51632=yCONFIG_REGULATOR_TPS6105X=yCONFIG_REGULATOR_TPS62360=yCONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not setCONFIG_REGULATOR_TPS65090=yCONFIG_REGULATOR_TPS65217=yCONFIG_REGULATOR_TPS65910=yCONFIG_REGULATOR_TWL4030=yCONFIG_REGULATOR_WM831X=yCONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8400 is not setCONFIG_REGULATOR_WM8994=yCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not setCONFIG_MEDIA_DIGITAL_TV_SUPPORT=yCONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not setCONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2=yCONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEOBUF_GEN=yCONFIG_VIDEOBUF_DMA_SG=yCONFIG_VIDEOBUF_VMALLOC=y
# CONFIG_VIDEO_V4L2_INT_DEVICE is not setCONFIG_DVB_CORE=y
# CONFIG_DVB_NET is not setCONFIG_TTPCI_EEPROM=yCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#CONFIG_MEDIA_USB_SUPPORT=y
#
# Analog/digital TV USB devices
#CONFIG_VIDEO_AU0828=yCONFIG_VIDEO_AU0828_V4L2=y
#
# Digital TV USB devices
#
# CONFIG_DVB_USB_V2 is not setCONFIG_DVB_TTUSB_BUDGET=yCONFIG_DVB_TTUSB_DEC=y
# CONFIG_SMS_USB_DRV is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not setCONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture/analog/hybrid TV support
#CONFIG_VIDEO_CX25821=y
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set
#
# Media digital TV PCI Adapters
#CONFIG_DVB_AV7110=yCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=yCONFIG_DVB_BUDGET=yCONFIG_DVB_BUDGET_AV=y
# CONFIG_DVB_BUDGET_PATCH is not setCONFIG_DVB_B2C2_FLEXCOP_PCI=y
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not setCONFIG_DVB_PLUTO2=yCONFIG_DVB_PT1=yCONFIG_DVB_NGENE=yCONFIG_DVB_DDBRIDGE=y
#
# Supported MMC/SDIO adapters
#CONFIG_SMS_SDIO_DRV=y
# CONFIG_RADIO_ADAPTERS is not setCONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options # CONFIG_VIDEO_BTCX=y CONFIG_VIDEO_TVEEPROM=y CONFIG_CYPRESS_FIRMWARE=y CONFIG_DVB_B2C2_FLEXCOP=y CONFIG_VIDEO_SAA7146=y CONFIG_VIDEO_SAA7146_VV=y CONFIG_SMS_SIANO_MDTV=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends) #
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Encoders, decoders, sensors and other helper chips #
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not setCONFIG_VIDEO_TDA7432=yCONFIG_VIDEO_TDA9840=yCONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not setCONFIG_VIDEO_MSP3400=y
# CONFIG_VIDEO_CS5345 is not setCONFIG_VIDEO_CS53L32A=yCONFIG_VIDEO_TLV320AIC23B=yCONFIG_VIDEO_UDA1342=yCONFIG_VIDEO_WM8775=yCONFIG_VIDEO_WM8739=yCONFIG_VIDEO_VP27SMPX=y
# CONFIG_VIDEO_SONY_BTF_MPX is not set
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not setCONFIG_VIDEO_BT819=y
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not setCONFIG_VIDEO_KS0127=yCONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not setCONFIG_VIDEO_SAA711X=yCONFIG_VIDEO_SAA7191=y
# CONFIG_VIDEO_TVP514X is not setCONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not setCONFIG_VIDEO_TW2804=yCONFIG_VIDEO_TW9903=yCONFIG_VIDEO_TW9906=yCONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#CONFIG_VIDEO_SAA717X=y
# CONFIG_VIDEO_CX25840 is not set
#
# Video encoders
#CONFIG_VIDEO_SAA7127=yCONFIG_VIDEO_SAA7185=y
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not setCONFIG_VIDEO_ADV7343=yCONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_AK881X is not setCONFIG_VIDEO_THS8200=y
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#CONFIG_VIDEO_UPD64031A=yCONFIG_VIDEO_UPD64083=y
#
# Miscelaneous helper chips
#CONFIG_VIDEO_THS7303=yCONFIG_VIDEO_M52790=y
#
# Sensors used on soc_camera driver
#CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not setCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not setCONFIG_MEDIA_TUNER_MT2060=yCONFIG_MEDIA_TUNER_MT2063=yCONFIG_MEDIA_TUNER_MT2266=yCONFIG_MEDIA_TUNER_MT2131=yCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_XC4000=yCONFIG_MEDIA_TUNER_MXL5005S=yCONFIG_MEDIA_TUNER_MXL5007T=y
# CONFIG_MEDIA_TUNER_MC44S803 is not setCONFIG_MEDIA_TUNER_MAX2165=yCONFIG_MEDIA_TUNER_TDA18218=yCONFIG_MEDIA_TUNER_FC0011=yCONFIG_MEDIA_TUNER_FC0012=yCONFIG_MEDIA_TUNER_FC0013=yCONFIG_MEDIA_TUNER_TDA18212=yCONFIG_MEDIA_TUNER_E4000=yCONFIG_MEDIA_TUNER_FC2580=yCONFIG_MEDIA_TUNER_TUA9001=y
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_R820T is not set
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=yCONFIG_DVB_STB6100=y
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV6110x=y
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=yCONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=yCONFIG_DVB_CX24123=y
# CONFIG_DVB_MT312 is not setCONFIG_DVB_ZL10036=yCONFIG_DVB_ZL10039=yCONFIG_DVB_S5H1420=yCONFIG_DVB_STV0288=yCONFIG_DVB_STB6000=yCONFIG_DVB_STV0299=y
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not setCONFIG_DVB_TDA8083=y
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not setCONFIG_DVB_VES1X93=yCONFIG_DVB_TUNER_ITD1000=yCONFIG_DVB_TUNER_CX24113=yCONFIG_DVB_TDA826X=yCONFIG_DVB_TUA6100=yCONFIG_DVB_CX24116=yCONFIG_DVB_SI21XX=yCONFIG_DVB_TS2020=yCONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_TDA10071 is not set
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=yCONFIG_DVB_SP887X=yCONFIG_DVB_CX22700=y
# CONFIG_DVB_CX22702 is not setCONFIG_DVB_S5H1432=yCONFIG_DVB_DRXD=yCONFIG_DVB_L64781=yCONFIG_DVB_TDA1004X=yCONFIG_DVB_NXT6000=y
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not setCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=y
# CONFIG_DVB_DIB9000 is not setCONFIG_DVB_TDA10048=yCONFIG_DVB_AF9013=yCONFIG_DVB_EC100=yCONFIG_DVB_HD29L2=yCONFIG_DVB_STV0367=y
# CONFIG_DVB_CXD2820R is not setCONFIG_DVB_RTL2830=y
# CONFIG_DVB_RTL2832 is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=y
# CONFIG_DVB_TDA10021 is not setCONFIG_DVB_TDA10023=yCONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=y
# CONFIG_DVB_OR51211 is not setCONFIG_DVB_OR51132=yCONFIG_DVB_BCM3510=y
# CONFIG_DVB_LGDT330X is not set CONFIG_DVB_LGDT3305=yCONFIG_DVB_LG2160=yCONFIG_DVB_S5H1409=yCONFIG_DVB_AU8522=yCONFIG_DVB_AU8522_DTV=yCONFIG_DVB_AU8522_V4L=yCONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=y
# CONFIG_DVB_DIB8000 is not setCONFIG_DVB_MB86A20S=y
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not setCONFIG_DVB_TUNER_DIB0070=yCONFIG_DVB_TUNER_DIB0090=y
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not setCONFIG_DVB_LNBP22=y
# CONFIG_DVB_ISL6405 is not setCONFIG_DVB_ISL6421=y
# CONFIG_DVB_ISL6423 is not setCONFIG_DVB_A8293=yCONFIG_DVB_LGS8GL5=y
# CONFIG_DVB_LGS8GXX is not setCONFIG_DVB_ATBM8830=y
# CONFIG_DVB_TDA665x is not setCONFIG_DVB_IX2505V=y
# CONFIG_DVB_IT913X_FE is not setCONFIG_DVB_M88RS2000=yCONFIG_DVB_AF9033=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not setCONFIG_AGP_INTEL=yCONFIG_AGP_NVIDIA=yCONFIG_AGP_SIS=yCONFIG_AGP_SWORKS=yCONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not setCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not setCONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not setCONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not setCONFIG_FB_N411=yCONFIG_FB_HGA=yCONFIG_FB_S1D13XXX=yCONFIG_FB_NVIDIA=yCONFIG_FB_NVIDIA_I2C=yCONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not setCONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not setCONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not setCONFIG_FB_I740=yCONFIG_FB_I810=yCONFIG_FB_I810_GTF=yCONFIG_FB_I810_I2C=yCONFIG_FB_LE80578=yCONFIG_FB_CARILLO_RANCH=y
# CONFIG_FB_INTEL is not setCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not setCONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not setCONFIG_FB_MATROX_I2C=y
# CONFIG_FB_RADEON is not setCONFIG_FB_ATY128=yCONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not setCONFIG_FB_S3=yCONFIG_FB_S3_DDC=yCONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not setCONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not setCONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not setCONFIG_FB_3DFX=yCONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not setCONFIG_FB_VOODOO1=yCONFIG_FB_VT8623=yCONFIG_FB_TRIDENT=yCONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not setCONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not setCONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not setCONFIG_FB_SM501=yCONFIG_FB_SMSCUFX=y
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not setCONFIG_EXYNOS_VIDEO=yCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not setCONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_PWM is not setCONFIG_BACKLIGHT_DA903X=yCONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not setCONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not setCONFIG_BACKLIGHT_LM3630=y
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not setCONFIG_BACKLIGHT_LP8788=yCONFIG_BACKLIGHT_OT200=yCONFIG_BACKLIGHT_PANDORA=yCONFIG_BACKLIGHT_TPS65217=y
# CONFIG_BACKLIGHT_AS3711 is not setCONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not setCONFIG_BACKLIGHT_BD6107=y
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not setCONFIG_FB_SSD1307=y
# CONFIG_SOUND is not set
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not setCONFIG_HID_APPLE=yCONFIG_HID_APPLEIR=yCONFIG_HID_AUREAL=yCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=yCONFIG_HID_DRAGONRISE=yCONFIG_DRAGONRISE_FF=yCONFIG_HID_EMS_FF=yCONFIG_HID_ELECOM=yCONFIG_HID_ELO=yCONFIG_HID_EZKEY=yCONFIG_HID_HOLTEK=y
# CONFIG_HOLTEK_FF is not setCONFIG_HID_HUION=yCONFIG_HID_KEYTOUCH=yCONFIG_HID_KYE=yCONFIG_HID_UCLOGIC=yCONFIG_HID_WALTOP=yCONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not setCONFIG_HID_TWINHAN=yCONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not setCONFIG_HID_MAGICMOUSE=yCONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not setCONFIG_HID_NTRIG=yCONFIG_HID_ORTEK=yCONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=yCONFIG_HID_PICOLCD=yCONFIG_HID_PICOLCD_FB=yCONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LEDS is not setCONFIG_HID_PRIMAX=yCONFIG_HID_ROCCAT=yCONFIG_HID_SAITEK=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SPEEDLINK=yCONFIG_HID_STEELSERIES=yCONFIG_HID_SUNPLUS=yCONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not setCONFIG_HID_TIVO=y
# CONFIG_HID_TOPSEED is not setCONFIG_HID_THINGM=yCONFIG_HID_THRUSTMASTER=yCONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_WACOM is not setCONFIG_HID_WIIMOTE=yCONFIG_HID_XINMO=yCONFIG_HID_ZEROPLUS=yCONFIG_ZEROPLUS_FF=yCONFIG_HID_ZYDACRON=yCONFIG_HID_SENSOR_HUB=y
#
# USB HID support
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not setCONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_EHCI_PCI=yCONFIG_USB_EHCI_HCD_PLATFORM=yCONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1362_HCD is not setCONFIG_USB_FUSBH200_HCD=yCONFIG_USB_FOTG210_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PCI is not setCONFIG_USB_OHCI_HCD_SSB=yCONFIG_USB_OHCI_HCD_PLATFORM=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_U132_HCD=yCONFIG_USB_SL811_HCD=yCONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not setCONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_RENESAS_USBHS_HCD is not setCONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not setCONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not setCONFIG_USB_MUSB_DUAL_ROLE=yCONFIG_USB_MUSB_TUSB6010=y
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not setCONFIG_MUSB_PIO_ONLY=yCONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_REALTEK=y CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_STORAGE_ENE_UB6250=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not setCONFIG_USB_CHIPIDEA=yCONFIG_USB_CHIPIDEA_UDC=y
# CONFIG_USB_CHIPIDEA_HOST is not setCONFIG_USB_CHIPIDEA_DEBUG=y
#
# USB port drivers
#CONFIG_USB_USS720=yCONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not setCONFIG_USB_SERIAL_SIMPLE=y
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=yCONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_SERIAL_CYPRESS_M8 is not setCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=yCONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not setCONFIG_USB_SERIAL_F81232=yCONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not setCONFIG_USB_SERIAL_IUU=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=y
# CONFIG_USB_SERIAL_KOBIL_SCT is not setCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_METRO=yCONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not setCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_NAVMAN=yCONFIG_USB_SERIAL_PL2303=yCONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not setCONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_SYMBOL is not setCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=yCONFIG_USB_SERIAL_XIRCOM=y
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not setCONFIG_USB_SERIAL_OPTICON=yCONFIG_USB_SERIAL_XSENS_MT=yCONFIG_USB_SERIAL_WISHBONE=y
# CONFIG_USB_SERIAL_ZTE is not set
# CONFIG_USB_SERIAL_SSU100 is not setCONFIG_USB_SERIAL_QT2=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=yCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=yCONFIG_USB_LED=yCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=yCONFIG_USB_IDMOUSE=yCONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=yCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=yCONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not setCONFIG_USB_EZUSB_FX2=yCONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#CONFIG_USB_PHY=yCONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not setCONFIG_SAMSUNG_USBPHY=yCONFIG_SAMSUNG_USB2PHY=yCONFIG_SAMSUNG_USB3PHY=yCONFIG_USB_GPIO_VBUS=y
# CONFIG_USB_ISP1301 is not setCONFIG_USB_RCAR_PHY=yCONFIG_USB_GADGET=yCONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_DEBUG_FILES is not setCONFIG_USB_GADGET_DEBUG_FS=yCONFIG_USB_GADGET_VBUS_DRAW=2CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not setCONFIG_USB_R8A66597=y
# CONFIG_USB_RENESAS_USBHS_UDC is not setCONFIG_USB_PXA27X=y
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not setCONFIG_USB_AMD5536UDC=yCONFIG_USB_NET2272=yCONFIG_USB_NET2272_DMA=y
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not setCONFIG_USB_DUMMY_HCD=yCONFIG_USB_LIBCOMPOSITE=yCONFIG_USB_U_ETHER=yCONFIG_USB_F_NCM=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not setCONFIG_USB_G_NCM=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_UWB is not setCONFIG_MMC=yCONFIG_MMC_DEBUG=yCONFIG_MMC_UNSAFE_RESUME=yCONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=yCONFIG_MMC_BLOCK_MINORS=8CONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=yCONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PCI=yCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not setCONFIG_MMC_GOLDFISH=yCONFIG_MMC_SDRICOH_CS=y
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not setCONFIG_MMC_USHC=yCONFIG_MMC_REALTEK_PCI=yCONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not setCONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=yCONFIG_MEMSTICK_JMICRON_38X=yCONFIG_MEMSTICK_R592=yCONFIG_MEMSTICK_REALTEK_PCI=yCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_LM3530 is not setCONFIG_LEDS_LM3533=yCONFIG_LEDS_LM3642=yCONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not setCONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not setCONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not setCONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not setCONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_PCA955X is not setCONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not setCONFIG_LEDS_WM8350=yCONFIG_LEDS_DA903X=yCONFIG_LEDS_PWM=yCONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_LT3593=yCONFIG_LEDS_TCA6507=y
CONFIG_LEDS_LM355x=yCONFIG_LEDS_OT200=yCONFIG_LEDS_BLINKM=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=yCONFIG_LEDS_TRIGGER_CPU=yCONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=y # CONFIG_INFINIBAND_USER_MAD is not set # CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=y CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_AMSO1100=y CONFIG_INFINIBAND_AMSO1100_DEBUG=y # CONFIG_INFINIBAND_CXGB4 is not set CONFIG_MLX4_INFINIBAND=y CONFIG_MLX5_INFINIBAND=y CONFIG_INFINIBAND_NES=y # CONFIG_INFINIBAND_NES_DEBUG is not set # CONFIG_INFINIBAND_OCRDMA is not set CONFIG_INFINIBAND_IPOIB=y CONFIG_INFINIBAND_IPOIB_CM=y # CONFIG_INFINIBAND_IPOIB_DEBUG is not set CONFIG_INFINIBAND_SRP=y # CONFIG_INFINIBAND_SRPT is not set # CONFIG_INFINIBAND_ISER is not set CONFIG_INFINIBAND_ISERT=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_SYSTOHC is not set # CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not setCONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not setCONFIG_RTC_DRV_88PM80X=yCONFIG_RTC_DRV_DS1307=yCONFIG_RTC_DRV_DS1374=yCONFIG_RTC_DRV_DS1672=yCONFIG_RTC_DRV_DS3232=yCONFIG_RTC_DRV_LP8788=yCONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_MAX8998 is not setCONFIG_RTC_DRV_RS5C372=yCONFIG_RTC_DRV_ISL1208=yCONFIG_RTC_DRV_ISL12022=yCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF2127=yCONFIG_RTC_DRV_PCF8523=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_BQ32K=yCONFIG_RTC_DRV_TWL4030=yCONFIG_RTC_DRV_TPS65910=y
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=yCONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not setCONFIG_RTC_DRV_EM3027=yCONFIG_RTC_DRV_RV3029C2=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=yCONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not setCONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not setCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not setCONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not setCONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_DS2404 is not setCONFIG_RTC_DRV_WM831X=y
# CONFIG_RTC_DRV_WM8350 is not setCONFIG_RTC_DRV_PCF50633=y
#
# on-CPU RTC drivers
#CONFIG_RTC_DRV_SNVS=yCONFIG_RTC_DRV_MOXART=y
#
# HID Sensor RTC drivers
#CONFIG_RTC_DRV_HID_SENSOR_TIME=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not setCONFIG_UIO=y
# CONFIG_UIO_CIF is not setCONFIG_UIO_PDRV_GENIRQ=yCONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not setCONFIG_UIO_SERCOS3=yCONFIG_UIO_PCI_GENERIC=y
# CONFIG_UIO_NETX is not setCONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not setCONFIG_VIRTIO=y
#
# Virtio drivers
#CONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_BALLOON=yCONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_DELL_LAPTOP is not setCONFIG_SENSORS_HDAPS=y
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_GOLDFISH_PIPE is not set
#
# Hardware Spinlock drivers
#CONFIG_CLKSRC_I8253=yCONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=y
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not setCONFIG_MAILBOX=yCONFIG_IOMMU_SUPPORT=yCONFIG_OF_IOMMU=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not setCONFIG_MEMORY=yCONFIG_IIO=yCONFIG_IIO_BUFFER=yCONFIG_IIO_BUFFER_CB=yCONFIG_IIO_KFIFO_BUF=yCONFIG_IIO_TRIGGERED_BUFFER=yCONFIG_IIO_TRIGGER=yCONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
# CONFIG_BMA180 is not setCONFIG_HID_SENSOR_ACCEL_3D=yCONFIG_IIO_ST_ACCEL_3AXIS=yCONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
#
# Analog to digital converters
#CONFIG_EXYNOS_ADC=yCONFIG_LP8788_ADC=yCONFIG_MAX1363=y
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not setCONFIG_TI_AM335X_ADC=yCONFIG_TWL6030_GPADC=yCONFIG_VIPERBOARD_ADC=y
#
# Amplifiers
#
#
# Hid Sensor IIO Common
#CONFIG_HID_SENSOR_IIO_COMMON=yCONFIG_HID_SENSOR_IIO_TRIGGER=y
# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not setCONFIG_IIO_ST_SENSORS_I2C=yCONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
# CONFIG_AD5064 is not setCONFIG_AD5380=yCONFIG_AD5446=y
# CONFIG_MAX517 is not setCONFIG_MCP4725=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#CONFIG_HID_SENSOR_GYRO_3D=yCONFIG_IIO_ST_GYRO_3AXIS=yCONFIG_IIO_ST_GYRO_I2C_3AXIS=yCONFIG_ITG3200=y
#
# Inertial measurement units
#CONFIG_INV_MPU6050_IIO=y
#
# Light sensors
#CONFIG_ADJD_S311=yCONFIG_APDS9300=yCONFIG_HID_SENSOR_ALS=y
# CONFIG_SENSORS_LM3533 is not set
# CONFIG_SENSORS_TSL2563 is not setCONFIG_VCNL4000=y
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not setCONFIG_HID_SENSOR_MAGNETOMETER_3D=yCONFIG_IIO_ST_MAGN_3AXIS=yCONFIG_IIO_ST_MAGN_I2C_3AXIS=y
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not setCONFIG_IIO_SYSFS_TRIGGER=y
#
# Pressure sensors
#CONFIG_IIO_ST_PRESS=yCONFIG_IIO_ST_PRESS_I2C=y
#
# Temperature sensors
#
# CONFIG_TMP006 is not set
# CONFIG_NTB is not setCONFIG_VME_BUS=y
#
# VME Bridge Drivers
#CONFIG_VME_CA91CX42=yCONFIG_VME_TSI148=y
#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
#
# VME Device Drivers
#CONFIG_PWM=yCONFIG_PWM_SYSFS=yCONFIG_PWM_PCA9685=y
# CONFIG_PWM_TWL is not setCONFIG_PWM_TWL_LED=yCONFIG_IRQCHIP=yCONFIG_IPACK_BUS=yCONFIG_BOARD_TPCI200=y
# CONFIG_SERIAL_IPOCTAL is not setCONFIG_RESET_CONTROLLER=yCONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not setCONFIG_FMC_TRIVIAL=yCONFIG_FMC_WRITE_EEPROM=yCONFIG_FMC_CHARDEV=y
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not setCONFIG_DCDBAS=yCONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not setCONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=yCONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not setCONFIG_EXT4_FS_SECURITY=yCONFIG_EXT4_DEBUG=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=yCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not setCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not setCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not setCONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
# CONFIG_BTRFS_DEBUG is not setCONFIG_BTRFS_ASSERT=y
# CONFIG_NILFS2_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=yCONFIG_FANOTIFY_ACCESS_PERMISSIONS=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_DEBUG=yCONFIG_QUOTA_TREE=yCONFIG_QFMT_V1=yCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=yCONFIG_FSCACHE_STATS=yCONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not setCONFIG_CACHEFILES=yCONFIG_CACHEFILES_DEBUG=yCONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=y
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V2=y
# CONFIG_NFS_V3 is not setCONFIG_NFS_V4=yCONFIG_NFS_SWAP=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not setCONFIG_NFS_USE_LEGACY_DNS=yCONFIG_NFS_DEBUG=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_NFSD_V4_SECURITY_LABEL=yCONFIG_NFSD_FAULT_INJECTION=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_SUNRPC_XPRT_RDMA=yCONFIG_SUNRPC_SWAP=yCONFIG_SUNRPC_DEBUG=yCONFIG_CEPH_FS=yCONFIG_CEPH_FSCACHE=yCONFIG_CIFS=yCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=yCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not setCONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_DFS_UPCALL=yCONFIG_CIFS_SMB2=yCONFIG_CIFS_FSCACHE=yCONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not setCONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not setCONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not setCONFIG_9P_FS=yCONFIG_9P_FSCACHE=yCONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not setCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not setCONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not setCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not setCONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not setCONFIG_NLS_MAC_CROATIAN=yCONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not setCONFIG_NLS_MAC_GREEK=yCONFIG_NLS_MAC_ICELAND=yCONFIG_NLS_MAC_INUIT=yCONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not setCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options # # CONFIG_PRINTK_TIME is not set CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#CONFIG_DEBUG_INFO=yCONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not setCONFIG_READABLE_ASM=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_MAGIC_SYSRQ=yCONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#CONFIG_DEBUG_PAGEALLOC=yCONFIG_WANT_PAGE_DEBUG_FLAGS=yCONFIG_PAGE_GUARD=y
# CONFIG_DEBUG_OBJECTS is not setCONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not setCONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_DEBUG_VM=yCONFIG_DEBUG_VM_RB=yCONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_HAVE_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#CONFIG_LOCKUP_DETECTOR=yCONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not setCONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1CONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not setCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_WW_MUTEX_SLOWPATH=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_DEBUG_ATOMIC_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not setCONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not setCONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_MMC_REQUEST is not setCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not setCONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=yCONFIG_DEBUG_STRICT_USER_COPY_CHECKS=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_HAVE_C_RECORDMCOUNT=yCONFIG_TRACER_MAX_TRACE=yCONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_TRACER_SNAPSHOT=yCONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_UPROBE_EVENT=yCONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not setCONFIG_MMIOTRACE=y
# CONFIG_RING_BUFFER_BENCHMARK is not setCONFIG_RING_BUFFER_STARTUP_TEST=y
#
# Runtime Testing
#CONFIG_LKDTM=y
# CONFIG_TEST_LIST_SORT is not setCONFIG_BACKTRACE_SELF_TEST=yCONFIG_RBTREE_TEST=yCONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_STRING_HELPERS is not setCONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=yCONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=yCONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=yCONFIG_CPA_DEBUG=yCONFIG_OPTIMIZE_INLINING=yCONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_TRUSTED_KEYS=yCONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_APPARMOR_HASH is not set
# CONFIG_SECURITY_YAMA is not set CONFIG_INTEGRITY=yCONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_AUDIT=y
# CONFIG_INTEGRITY_ASYMMETRIC_KEYS is not set CONFIG_IMA=yCONFIG_IMA_MEASURE_PCR_IDX=10 CONFIG_IMA_APPRAISE=y
# CONFIG_EVM is not set CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="tomoyo" CONFIG_XOR_BLOCKS=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_PCOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not setCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_ABLK_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_CMAC=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=yCONFIG_CRYPTO_VMAC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=yCONFIG_CRYPTO_CRC32=yCONFIG_CRYPTO_CRC32_PCLMUL=yCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=yCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_AES_NI_INTEL=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST_COMMON=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not setCONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not setCONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=yCONFIG_CRYPTO_LZO=yCONFIG_CRYPTO_LZ4=yCONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_USER_API=yCONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not setCONFIG_ASYMMETRIC_KEY_TYPE=yCONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=yCONFIG_PUBLIC_KEY_ALGO_RSA=y
# CONFIG_X509_CERTIFICATE_PARSER is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_LGUEST is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_RAID6_PQ=yCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_IO=yCONFIG_PERCPU_RWSEM=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not setCONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not setCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_CRC8=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4_COMPRESS=yCONFIG_LZ4HC_COMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=yCONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not setCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_LZMA=yCONFIG_DECOMPRESS_XZ=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_BTREE=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_DQL=yCONFIG_NLATTR=yCONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=yCONFIG_AVERAGE=yCONFIG_CLZ_TAB=yCONFIG_CORDIC=y
# CONFIG_DDR is not setCONFIG_MPILIB=yCONFIG_SIGNATURE=yCONFIG_OID_REGISTRY=yCONFIG_FONT_SUPPORT=yCONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
full crashlog attached.
Ingo
Linux version 3.12.0-rc4-01668-gfd71a04-dirty (mingo@earth5) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #229484 Wed Oct 9 16:59:58 CEST 2013 KERNEL supported cpus:
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
CPU: Your system may be unstable.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
console [earlyser0] enabled
debug: ignoring loglevel setting.
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x037fffff]
Base memory trampoline at [b009b000] 9b000 size 16384init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4kinit_memory_mapping: [mem 0x3f800000-0x3fbfffff]
[mem 0x3f800000-0x3fbfffff] page 4k
BRK [0x0335b000, 0x0335bfff] PGTABLEinit_memory_mapping: [mem 0x38000000-0x3f7fffff]
[mem 0x38000000-0x3f7fffff] page 4k
BRK [0x0335c000, 0x0335cfff] PGTABLE
BRK [0x0335d000, 0x0335dfff] PGTABLE
BRK [0x0335e000, 0x0335efff] PGTABLE
BRK [0x0335f000, 0x0335ffff] PGTABLE
BRK [0x03360000, 0x03360fff] PGTABLEinit_memory_mapping: [mem 0x00100000-0x37ffffff]
[mem 0x00100000-0x37ffffff] page 4kinit_memory_mapping: [mem 0x3fc00000-0x3ffeffff]
[mem 0x3fc00000-0x3ffeffff] page 4k
0MB HIGHMEM available.
1023MB LOWMEM available.
mapped low ram: 0 - 3fff0000
low ram: 0 - 3fff0000
Zone ranges:
Normal [mem 0x00001000-0x3ffeffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262030free_area_init_node: node 0, pgdat b2cac760, node_mem_map ef214024
Normal zone: 2304 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 262030 pages, LIFO batch:31
Using APIC driver default
SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
No local APIC present or hardware disabled
APIC: disable apic facility
APIC: switched to apic NOOP
------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic_noop.c:113 noop_apic_read+0x29/0x3f() CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0-rc4-01668-gfd71a04-dirty #229484 b286bb7c b2b4def8 b235a604 b2b4df28 b1028784 b286ec98 00000000 00000000 b286bb7c 00000071 b1015bba b1015bba 00000071 00000000 b2dc0000 b2b4df38 b102882f 00000009 00000000 b2b4df40 b1015bba b2b4df48 b10142e8 b2b4df58 Call Trace: [<b235a604>] dump_stack+0x16/0x18 [<b1028784>] warn_slowpath_common+0x73/0x89 [<b1015bba>] ? noop_apic_read+0x29/0x3f [<b102882f>] warn_slowpath_null+0x1d/0x1f [<b1015bba>] noop_apic_read+0x29/0x3f [<b10142e8>] read_apic_id+0x14/0x1f [<b2d0ed8d>] init_apic_mappings+0xea/0x140 [<b2d080f3>] setup_arch+0xa45/0xab3 [<b23557b4>] ? printk+0x38/0x3a [<b2d057e7>] start_kernel+0xb9/0x354 [<b2d05384>] i386_start_kernel+0x12e/0x131 ---[ end trace a7919e7f17c0a725 ]---
nr_irqs_gsi: 16
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259726
Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200,keep console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
sysrq: sysrq always enabled.
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 1000788K/1048120K available (19921K kernel code, 1764K rwdata, 8020K rodata, 732K init, 5700K bss, 47332K reserved, 0K highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB)
lowmem : 0xb0000000 - 0xefff0000 (1023 MB)
.init : 0xb2d05000 - 0xb2dbc000 ( 732 kB)
.data : 0xb237475f - 0xb2d040e0 (9790 kB)
.text : 0xb1000000 - 0xb237475f (19921 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:2304 nr_irqs:256 16
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic_noop.c:119 noop_apic_write+0x26/0x3b()
CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484
b286bb7c b2b4df4c b235a604 b2b4df7c b1028784 b286ec98 00000000 00000000
b286bb7c 00000077 b1015b7c b1015b7c 00000077 b2d91900 b2b54460 b2b4df8c
b102882f 00000009 00000000 b2b4df94 b1015b7c b2b4df9c b2d0eb47 b2b4dfb4
Call Trace:
[<b235a604>] dump_stack+0x16/0x18
[<b1028784>] warn_slowpath_common+0x73/0x89
[<b1015b7c>] ? noop_apic_write+0x26/0x3b
[<b102882f>] warn_slowpath_null+0x1d/0x1f
[<b1015b7c>] noop_apic_write+0x26/0x3b
[<b2d0eb47>] init_bsp_APIC+0x64/0xb4
[<b2d081bc>] init_ISA_irqs+0x16/0x46
[<b2d0821c>] native_init_IRQ+0xa/0x1ae
[<b2d08210>] init_IRQ+0x24/0x26
[<b2d0591f>] start_kernel+0x1f1/0x354
[<b2d054d3>] ? repair_env_string+0x5e/0x5e
[<b2d05384>] i386_start_kernel+0x12e/0x131
---[ end trace a7919e7f17c0a726 ]---CPU 0 irqstacks, hard=b008c000 soft=b008e000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 3551 kB
per task-struct memory footprint: 1152 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: A-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-B-A deadlock: A-B-B-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-B-C-C-A deadlock: A-B-B-C-C-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-C-A-B-C deadlock: A-B-C-A-B-C deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-B-C-C-D-D-A deadlock: A-B-B-C-C-D-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-C-D-B-D-D-A deadlock: A-B-C-D-B-D-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-C-D-B-C-D-A deadlock: A-B-C-D-B-C-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
double unlock: double unlock: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
initialize held: initialize held: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
bad unlock order: bad unlock order: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: recursive read-lock: | | ok | ok | | |failed|failed|
recursive read-lock #2: recursive read-lock #2: | | ok | ok | | |failed|failed|
mixed read-write-lock: mixed read-write-lock: | |failed|failed| | |failed|failed|
mixed write-read-lock: mixed write-read-lock: | |failed|failed| | |failed|failed|
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: hard-irqs-on + irq-safe-A/12:failed|failed|failed|failed| ok | ok |
soft-irqs-on + irq-safe-A/12: soft-irqs-on + irq-safe-A/12:failed|failed|failed|failed| ok | ok |
hard-irqs-on + irq-safe-A/21: hard-irqs-on + irq-safe-A/21:failed|failed|failed|failed| ok | ok |
soft-irqs-on + irq-safe-A/21: soft-irqs-on + irq-safe-A/21:failed|failed|failed|failed| ok | ok |
sirq-safe-A => hirqs-on/12: sirq-safe-A => hirqs-on/12:failed|failed|failed|failed| ok | ok |
sirq-safe-A => hirqs-on/21: sirq-safe-A => hirqs-on/21:failed|failed|failed|failed| ok | ok |
hard-safe-A + irqs-on/12: hard-safe-A + irqs-on/12:failed|failed|failed|failed| ok | ok |
soft-safe-A + irqs-on/12: soft-safe-A + irqs-on/12:failed|failed|failed|failed| ok | ok |
hard-safe-A + irqs-on/21: hard-safe-A + irqs-on/21:failed|failed|failed|failed| ok | ok |
soft-safe-A + irqs-on/21: soft-safe-A + irqs-on/21:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/123: hard-safe-A + unsafe-B #1/123:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/123: soft-safe-A + unsafe-B #1/123:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/132: hard-safe-A + unsafe-B #1/132:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/132: soft-safe-A + unsafe-B #1/132:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/213: hard-safe-A + unsafe-B #1/213:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/213: soft-safe-A + unsafe-B #1/213:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/231: hard-safe-A + unsafe-B #1/231:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/231: soft-safe-A + unsafe-B #1/231:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/312: hard-safe-A + unsafe-B #1/312:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/312: soft-safe-A + unsafe-B #1/312:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/321: hard-safe-A + unsafe-B #1/321:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/321: soft-safe-A + unsafe-B #1/321:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/123: hard-safe-A + unsafe-B #2/123:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/123: soft-safe-A + unsafe-B #2/123:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/132: hard-safe-A + unsafe-B #2/132:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/132: soft-safe-A + unsafe-B #2/132:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/213: hard-safe-A + unsafe-B #2/213:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/213: soft-safe-A + unsafe-B #2/213:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/231: hard-safe-A + unsafe-B #2/231:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/231: soft-safe-A + unsafe-B #2/231:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/312: hard-safe-A + unsafe-B #2/312:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/312: soft-safe-A + unsafe-B #2/312:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/321: hard-safe-A + unsafe-B #2/321:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/321: soft-safe-A + unsafe-B #2/321:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/123: hard-irq lock-inversion/123:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/123: soft-irq lock-inversion/123:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/132: hard-irq lock-inversion/132:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/132: soft-irq lock-inversion/132:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/213: hard-irq lock-inversion/213:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/213: soft-irq lock-inversion/213:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/231: hard-irq lock-inversion/231:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/231: soft-irq lock-inversion/231:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/312: hard-irq lock-inversion/312:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/312: soft-irq lock-inversion/312:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/321: hard-irq lock-inversion/321:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/321: soft-irq lock-inversion/321:failed|failed|failed|failed| ok | ok |
hard-irq read-recursion/123: hard-irq read-recursion/123: ok | ok |
soft-irq read-recursion/123: soft-irq read-recursion/123: ok | ok |
hard-irq read-recursion/132: hard-irq read-recursion/132: ok | ok |
soft-irq read-recursion/132: soft-irq read-recursion/132: ok | ok |
hard-irq read-recursion/213: hard-irq read-recursion/213: ok | ok |
soft-irq read-recursion/213: soft-irq read-recursion/213: ok | ok |
hard-irq read-recursion/231: hard-irq read-recursion/231: ok | ok |
soft-irq read-recursion/231: soft-irq read-recursion/231: ok | ok |
hard-irq read-recursion/312: hard-irq read-recursion/312: ok | ok |
soft-irq read-recursion/312: soft-irq read-recursion/312: ok | ok |
hard-irq read-recursion/321: hard-irq read-recursion/321: ok | ok |
soft-irq read-recursion/321: soft-irq read-recursion/321: ok | ok |
--------------------------------------------------------------------------
| Wound/wait tests |
---------------------
ww api failures: ww api failures: ok | ok | ok | ok | ok | ok |
ww contexts mixing: ww contexts mixing:failed|failed| ok | ok |
finishing ww context: finishing ww context: ok | ok | ok | ok | ok | ok | ok | ok |
locking mismatches: locking mismatches: ok | ok | ok | ok | ok | ok |
EDEADLK handling: EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
spinlock nest unlocked: spinlock nest unlocked: ok | ok |
-----------------------------------------------------
|block | try |context|
-----------------------------------------------------
context: context:failed|failed| ok | ok | ok | ok |
try: try:failed|failed| ok | ok |failed|failed|
block: block:failed|failed| ok | ok |failed|failed|
spinlock: spinlock:failed|failed| ok | ok |failed|failed|
--------------------------------------------------------
141 out of 253 testcases failed, as expected. |
----------------------------------------------------
tsc: Fast TSC calibration using PIT
tsc: Detected 2010.210 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.42 BogoMIPS (lpj=2010210) 4020.42 BogoMIPS (lpj=2010210)pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
mce: unknown CPU type - not enabling MCE support
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0tlb_flushall_shift: -1
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0tlb_flushall_shift: -1
CPU: CPU: AuthenticAMD AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (fam: 0f, model: 23 (fam: 0f, model: 23, stepping: 02) , stepping: 02)
calling set_real_mode_permissions+0x0/0x7c @ 1
initcall set_real_mode_permissions+0x0/0x7c returned 0 after 0 usecs
calling trace_init_flags_sys_exit+0x0/0x11 @ 1
initcall trace_init_flags_sys_exit+0x0/0x11 returned 0 after 0 usecs
calling trace_init_flags_sys_enter+0x0/0x11 @ 1
initcall trace_init_flags_sys_enter+0x0/0x11 returned 0 after 0 usecs
calling init_hw_perf_events+0x0/0x4bb @ 1
Performance Events: Performance Events: no PMU driver, software events only.
no PMU driver, software events only.
initcall init_hw_perf_events+0x0/0x4bb returned 0 after 1953 usecs
calling register_trigger_all_cpu_backtrace+0x0/0x13 @ 1
initcall register_trigger_all_cpu_backtrace+0x0/0x13 returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x17 @ 1
initcall spawn_ksoftirqd+0x0/0x17 returned 0 after 0 usecs
calling init_workqueues+0x0/0x2cf @ 1
initcall init_workqueues+0x0/0x2cf returned 0 after 0 usecs
calling relay_init+0x0/0x7 @ 1
initcall relay_init+0x0/0x7 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x18c @ 1
initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 976 usecs
calling init_events+0x0/0x5d @ 1
initcall init_events+0x0/0x5d returned 0 after 0 usecs
calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
calling event_trace_memsetup+0x0/0x5a @ 1
initcall event_trace_memsetup+0x0/0x5a returned 0 after 0 usecs
calling init_ftrace_syscalls+0x0/0x5e @ 1
initcall init_ftrace_syscalls+0x0/0x5e returned 0 after 976 usecs
calling dynamic_debug_init+0x0/0x22c @ 1
initcall dynamic_debug_init+0x0/0x22c returned 0 after 2929 usecs
enabled ExtINT on CPU#0
No ESR for 82489DX.
Using local APIC timer interrupts.
calibrating APIC timer ...
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 0
------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/time/clockevents.c:49 clockevent_delta2ns+0x53/0xb7() CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 b2879283 b2879283 b010dedc b010dedc b235a604 b235a604 b010df0c b010df0c b1028784 b1028784 b286ec98 b286ec98 00000000 00000000 00000001 00000001
b2879283 b2879283 00000031 00000031 b10613a9 b10613a9 b10613a9 b10613a9 00000031 00000031 00000000 00000000 b2b5a120 b2b5a120 b010df1c b010df1c
b102882f b102882f 00000009 00000009 00000000 00000000 b010df34 b010df34 b10613a9 b10613a9 00000000 00000000 00000000 00000000 7fffffff 7fffffff
Call Trace: [<b235a604>] dump_stack+0x16/0x18 [<b1028784>] warn_slowpath_common+0x73/0x89 [<b10613a9>] ? clockevent_delta2ns+0x53/0xb7 [<b102882f>] warn_slowpath_null+0x1d/0x1f [<b10613a9>] clockevent_delta2ns+0x53/0xb7 [<b2d0e6fe>] setup_boot_APIC_clock+0x1e4/0x3d1 [<b2d0ef11>] APIC_init_uniprocessor+0xef/0xfb [<b2d05c2a>] kernel_init_freeable+0x5a/0x178 [<b1047d39>] ? finish_task_switch.constprop.64+0x28/0x9d [<b2350e9e>] kernel_init+0xb/0xc3 [<b23735d7>] ret_from_kernel_thread+0x1b/0x28 [<b2350e93>] ? rest_init+0xb7/0xb7 ---[ end trace a7919e7f17c0a727 ]---
..... delta 0
..... mult: 1
..... calibration result: 0
..... CPU clock speed is 2009.0995 MHz.
..... host bus clock speed is 0.0000 MHz.
APIC frequency too slow, disabling apic timer
devtmpfs: initialized
calling init_mmap_min_addr+0x0/0x11 @ 1
initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
calling net_ns_init+0x0/0x142 @ 1
initcall net_ns_init+0x0/0x142 returned 0 after 0 usecs
calling reboot_init+0x0/0x7 @ 1
initcall reboot_init+0x0/0x7 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x1e @ 1
initcall init_lapic_sysfs+0x0/0x1e returned 0 after 0 usecs
calling wq_sysfs_init+0x0/0x11 @ 1
initcall wq_sysfs_init+0x0/0x11 returned 0 after 0 usecs
calling ksysfs_init+0x0/0x7a @ 1
initcall ksysfs_init+0x0/0x7a returned 0 after 0 usecs
calling pm_init+0x0/0x7a @ 1
initcall pm_init+0x0/0x7a returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xf @ 1
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
calling init_wakeup_tracer+0x0/0x1d @ 1
initcall init_wakeup_tracer+0x0/0x1d returned 0 after 0 usecs
calling event_trace_enable+0x0/0xf1 @ 1
initcall event_trace_enable+0x0/0xf1 returned 0 after 2929 usecs
calling init_zero_pfn+0x0/0x25 @ 1
initcall init_zero_pfn+0x0/0x25 returned 0 after 0 usecs
calling memory_failure_init+0x0/0x91 @ 1
initcall memory_failure_init+0x0/0x91 returned 0 after 0 usecs
calling fsnotify_init+0x0/0x2c @ 1
initcall fsnotify_init+0x0/0x2c returned 0 after 0 usecs
calling filelock_init+0x0/0x48 @ 1
initcall filelock_init+0x0/0x48 returned 0 after 0 usecs
calling init_aout_binfmt+0x0/0x13 @ 1
initcall init_aout_binfmt+0x0/0x13 returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x28 @ 1
initcall init_misc_binfmt+0x0/0x28 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x13 @ 1
initcall init_elf_binfmt+0x0/0x13 returned 0 after 0 usecs
calling debugfs_init+0x0/0x4c @ 1
initcall debugfs_init+0x0/0x4c returned 0 after 0 usecs
calling securityfs_init+0x0/0x43 @ 1
initcall securityfs_init+0x0/0x43 returned 0 after 0 usecs
calling calibrate_xor_blocks+0x0/0x189 @ 1
xor: measuring software checksum speed
pIII_sse : 3716.000 MB/sec
prefetch64-sse: 4840.000 MB/sec
xor: using function: prefetch64-sse (4840.000 MB/sec)
initcall calibrate_xor_blocks+0x0/0x189 returned 0 after 23437 usecs calling prandom_init+0x0/0x85 @ 1
initcall prandom_init+0x0/0x85 returned 0 after 0 usecs
calling test_atomic64+0x0/0x629 @ 1
atomic64 test passed for i386+ platform with CX8 and with SSE
initcall test_atomic64+0x0/0x629 returned 0 after 976 usecs
calling sfi_sysfs_init+0x0/0xc3 @ 1
initcall sfi_sysfs_init+0x0/0xc3 returned 0 after 0 usecs
calling virtio_init+0x0/0x22 @ 1
initcall virtio_init+0x0/0x22 returned 0 after 0 usecs
calling regulator_init+0x0/0x69 @ 1
regulator-dummy: no parameters
initcall regulator_init+0x0/0x69 returned 0 after 976 usecs
calling early_resume_init+0x0/0x1c3 @ 1
RTC time: 20:27:31, date: 10/05/13
initcall early_resume_init+0x0/0x1c3 returned 0 after 976 usecs
calling bsp_pm_check_init+0x0/0x11 @ 1
initcall bsp_pm_check_init+0x0/0x11 returned 0 after 0 usecs
calling sock_init+0x0/0x89 @ 1
initcall sock_init+0x0/0x89 returned 0 after 0 usecs
calling netpoll_init+0x0/0x39 @ 1
initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x197 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x197 returned 0 after 976 usecs
calling olpc_init+0x0/0xfc @ 1
initcall olpc_init+0x0/0xfc returned 0 after 0 usecs
calling bdi_class_init+0x0/0x3c @ 1
initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0xf @ 1
initcall kobject_uevent_init+0x0/0xf returned 0 after 976 usecs
calling gpiolib_sysfs_init+0x0/0x78 @ 1
initcall gpiolib_sysfs_init+0x0/0x78 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x14 @ 1
initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
calling pci_driver_init+0x0/0xf @ 1
initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
calling backlight_class_init+0x0/0x4c @ 1
initcall backlight_class_init+0x0/0x4c returned 0 after 0 usecs
calling video_output_class_init+0x0/0x14 @ 1
initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
calling anatop_regulator_init+0x0/0x11 @ 1
initcall anatop_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tty_class_init+0x0/0x2b @ 1
initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc9 @ 1
initcall vtconsole_class_init+0x0/0xc9 returned 0 after 976 usecs
calling wakeup_sources_debugfs_init+0x0/0x2f @ 1
initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs calling regmap_initcall+0x0/0xc @ 1
initcall regmap_initcall+0x0/0xc returned 0 after 0 usecs
calling syscon_init+0x0/0x11 @ 1
initcall syscon_init+0x0/0x11 returned 0 after 0 usecs
calling hsi_init+0x0/0xf @ 1
initcall hsi_init+0x0/0xf returned 0 after 976 usecs
calling i2c_init+0x0/0x35 @ 1
initcall i2c_init+0x0/0x35 returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x2b4 @ 1
initcall arch_kdebugfs_init+0x0/0x2b4 returned 0 after 0 usecs
calling init_pit_clocksource+0x0/0x15 @ 1
initcall init_pit_clocksource+0x0/0x15 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x56 @ 1
initcall mtrr_if_init+0x0/0x56 returned 0 after 0 usecs
calling kdump_buf_page_init+0x0/0x38 @ 1
initcall kdump_buf_page_init+0x0/0x38 returned 0 after 0 usecs
calling olpc_ec_init_module+0x0/0x11 @ 1
initcall olpc_ec_init_module+0x0/0x11 returned 0 after 0 usecs
calling pci_arch_init+0x0/0x55 @ 1
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x55 returned 0 after 1953 usecs
calling topology_init+0x0/0x13 @ 1
Missing cpus node, bailing out
initcall topology_init+0x0/0x13 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x30 @ 1
initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x2be @ 1
initcall param_sysfs_init+0x0/0x2be returned 0 after 37109 usecs
calling pm_sysrq_init+0x0/0x16 @ 1
initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
calling default_bdi_init+0x0/0x78 @ 1
initcall default_bdi_init+0x0/0x78 returned 0 after 0 usecs
calling init_bio+0x0/0xee @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xee returned 0 after 976 usecs
calling fsnotify_notification_init+0x0/0x9c @ 1
initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs calling cryptomgr_init+0x0/0xf @ 1
initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
calling cryptd_init+0x0/0x80 @ 1
initcall cryptd_init+0x0/0x80 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x1d @ 1
initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2f @ 1
initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x2a @ 1
initcall blk_softirq_init+0x0/0x2a returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x2a @ 1
initcall blk_iopoll_setup+0x0/0x2a returned 0 after 0 usecs
calling genhd_device_init+0x0/0x6a @ 1
initcall genhd_device_init+0x0/0x6a returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2f @ 1
initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 usecs
calling raid6_select_algo+0x0/0x1e9 @ 1
raid6: mmxx1 1648 MB/s
raid6: mmxx2 2992 MB/s
raid6: sse1x1 464 MB/s
raid6: sse1x2 757 MB/s
raid6: sse2x1 777 MB/s
raid6: sse2x2 1312 MB/s
raid6: int32x1 347 MB/s
raid6: int32x2 546 MB/s
raid6: int32x4 718 MB/s
raid6: int32x8 714 MB/s
raid6: using algorithm mmxx2 (2992 MB/s)
raid6: using intx1 recovery algorithm
initcall raid6_select_algo+0x0/0x1e9 returned 0 after 177734 usecs
calling gpiolib_debugfs_init+0x0/0x2a @ 1
initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling max7300_init+0x0/0x11 @ 1
initcall max7300_init+0x0/0x11 returned 0 after 0 usecs
calling max732x_init+0x0/0x11 @ 1
initcall max732x_init+0x0/0x11 returned 0 after 0 usecs
calling mcp23s08_init+0x0/0x11 @ 1
initcall mcp23s08_init+0x0/0x11 returned 0 after 0 usecs
calling pca953x_init+0x0/0x11 @ 1
initcall pca953x_init+0x0/0x11 returned 0 after 0 usecs
calling pcf857x_init+0x0/0x11 @ 1
initcall pcf857x_init+0x0/0x11 returned 0 after 0 usecs
calling sx150x_init+0x0/0x11 @ 1
initcall sx150x_init+0x0/0x11 returned 0 after 0 usecs
calling tc3589x_gpio_init+0x0/0x11 @ 1
initcall tc3589x_gpio_init+0x0/0x11 returned 0 after 0 usecs
calling gpio_twl4030_init+0x0/0x11 @ 1
initcall gpio_twl4030_init+0x0/0x11 returned 0 after 0 usecs
calling wm8350_gpio_init+0x0/0x11 @ 1
initcall wm8350_gpio_init+0x0/0x11 returned 0 after 0 usecs
calling pwm_debugfs_init+0x0/0x2a @ 1
initcall pwm_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling pwm_sysfs_init+0x0/0x14 @ 1
initcall pwm_sysfs_init+0x0/0x14 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x3d @ 1
initcall pci_slot_init+0x0/0x3d returned 0 after 0 usecs
calling fbmem_init+0x0/0x96 @ 1
initcall fbmem_init+0x0/0x96 returned 0 after 0 usecs
calling pnp_init+0x0/0xf @ 1
initcall pnp_init+0x0/0xf returned 0 after 0 usecs
calling regulator_fixed_voltage_init+0x0/0x11 @ 1
initcall regulator_fixed_voltage_init+0x0/0x11 returned 0 after 0 usecs calling pm8607_regulator_init+0x0/0x11 @ 1
initcall pm8607_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling ad5398_init+0x0/0x11 @ 1
initcall ad5398_init+0x0/0x11 returned 0 after 0 usecs
calling as3711_regulator_init+0x0/0x11 @ 1
initcall as3711_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling da903x_regulator_init+0x0/0x11 @ 1
initcall da903x_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling gpio_regulator_init+0x0/0x11 @ 1
initcall gpio_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling isl6271a_init+0x0/0x11 @ 1
initcall isl6271a_init+0x0/0x11 returned 0 after 0 usecs
calling lp3972_module_init+0x0/0x11 @ 1
initcall lp3972_module_init+0x0/0x11 returned 0 after 0 usecs
calling lp8755_init+0x0/0x11 @ 1
initcall lp8755_init+0x0/0x11 returned 0 after 0 usecs
calling max1586_pmic_init+0x0/0x11 @ 1
initcall max1586_pmic_init+0x0/0x11 returned 0 after 0 usecs
calling max8649_init+0x0/0x11 @ 1
initcall max8649_init+0x0/0x11 returned 0 after 0 usecs
calling max8660_init+0x0/0x11 @ 1
initcall max8660_init+0x0/0x11 returned 0 after 0 usecs
calling max8998_pmic_init+0x0/0x11 @ 1
initcall max8998_pmic_init+0x0/0x11 returned 0 after 0 usecs
calling tps51632_init+0x0/0x11 @ 1
initcall tps51632_init+0x0/0x11 returned 0 after 0 usecs
calling pcf50633_regulator_init+0x0/0x11 @ 1
initcall pcf50633_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps6105x_regulator_init+0x0/0x11 @ 1
initcall tps6105x_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps62360_init+0x0/0x11 @ 1
initcall tps62360_init+0x0/0x11 returned 0 after 0 usecs
calling tps_65023_init+0x0/0x11 @ 1
initcall tps_65023_init+0x0/0x11 returned 0 after 0 usecs
calling tps65090_regulator_init+0x0/0x11 @ 1
initcall tps65090_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps65217_regulator_init+0x0/0x11 @ 1
initcall tps65217_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps65910_init+0x0/0x11 @ 1
initcall tps65910_init+0x0/0x11 returned 0 after 0 usecs
calling twlreg_init+0x0/0x11 @ 1
initcall twlreg_init+0x0/0x11 returned 0 after 0 usecs
calling wm831x_dcdc_init+0x0/0x8a @ 1
initcall wm831x_dcdc_init+0x0/0x8a returned 0 after 0 usecs
calling wm831x_isink_init+0x0/0x30 @ 1
initcall wm831x_isink_init+0x0/0x30 returned 0 after 0 usecs
calling wm831x_ldo_init+0x0/0x6a @ 1
initcall wm831x_ldo_init+0x0/0x6a returned 0 after 0 usecs
calling wm8350_regulator_init+0x0/0x11 @ 1
initcall wm8350_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling misc_init+0x0/0xad @ 1
initcall misc_init+0x0/0xad returned 0 after 0 usecs
calling tifm_init+0x0/0x8c @ 1
initcall tifm_init+0x0/0x8c returned 0 after 0 usecs
calling pm860x_i2c_init+0x0/0x30 @ 1
initcall pm860x_i2c_init+0x0/0x30 returned 0 after 0 usecs
calling pm800_i2c_init+0x0/0x11 @ 1
initcall pm800_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling tc3589x_init+0x0/0x11 @ 1
initcall tc3589x_init+0x0/0x11 returned 0 after 0 usecs
calling wm8400_module_init+0x0/0x30 @ 1
initcall wm8400_module_init+0x0/0x30 returned 0 after 0 usecs
calling wm831x_i2c_init+0x0/0x30 @ 1
initcall wm831x_i2c_init+0x0/0x30 returned 0 after 0 usecs
calling wm8350_i2c_init+0x0/0x11 @ 1
initcall wm8350_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling tps6105x_init+0x0/0x11 @ 1
initcall tps6105x_init+0x0/0x11 returned 0 after 0 usecs
calling tps6507x_i2c_init+0x0/0x11 @ 1
initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling tps65217_init+0x0/0x11 @ 1
initcall tps65217_init+0x0/0x11 returned 0 after 0 usecs
calling tps65910_i2c_init+0x0/0x11 @ 1
initcall tps65910_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling da903x_init+0x0/0x11 @ 1
initcall da903x_init+0x0/0x11 returned 0 after 0 usecs
calling lp8788_init+0x0/0x11 @ 1
initcall lp8788_init+0x0/0x11 returned 0 after 0 usecs
calling max77693_i2c_init+0x0/0x11 @ 1
initcall max77693_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling max8998_i2c_init+0x0/0x11 @ 1
initcall max8998_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling pcf50633_init+0x0/0x11 @ 1
initcall pcf50633_init+0x0/0x11 returned 0 after 0 usecs
calling tps65090_init+0x0/0x11 @ 1
initcall tps65090_init+0x0/0x11 returned 0 after 0 usecs
calling lm3533_i2c_init+0x0/0x11 @ 1
initcall lm3533_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling as3711_i2c_init+0x0/0x11 @ 1
initcall as3711_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling init_scsi+0x0/0x80 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x80 returned 0 after 976 usecs
calling ata_init+0x0/0x2a1 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x2a1 returned 0 after 976 usecs
calling phy_init+0x0/0x28 @ 1
initcall phy_init+0x0/0x28 returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x32 @ 1
initcall init_pcmcia_cs+0x0/0x32 returned 0 after 0 usecs
calling usb_init+0x0/0x146 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x146 returned 0 after 3906 usecs
calling usb_phy_gen_xceiv_init+0x0/0x11 @ 1
initcall usb_phy_gen_xceiv_init+0x0/0x11 returned 0 after 0 usecs
calling usb_udc_init+0x0/0x45 @ 1
initcall usb_udc_init+0x0/0x45 returned 0 after 0 usecs
calling serio_init+0x0/0x2e @ 1
initcall serio_init+0x0/0x2e returned 0 after 0 usecs
calling gameport_init+0x0/0x2e @ 1
initcall gameport_init+0x0/0x2e returned 0 after 0 usecs
calling input_init+0x0/0xf9 @ 1
initcall input_init+0x0/0xf9 returned 0 after 0 usecs
calling tca6416_keypad_init+0x0/0x11 @ 1
initcall tca6416_keypad_init+0x0/0x11 returned 0 after 0 usecs
calling tca8418_keypad_init+0x0/0x11 @ 1
initcall tca8418_keypad_init+0x0/0x11 returned 0 after 0 usecs
calling rtc_init+0x0/0x44 @ 1
initcall rtc_init+0x0/0x44 returned 0 after 0 usecs
calling i2c_gpio_init+0x0/0x30 @ 1
initcall i2c_gpio_init+0x0/0x30 returned 0 after 0 usecs
calling videodev_init+0x0/0x7f @ 1
Linux video capture interface: v2.00
initcall videodev_init+0x0/0x7f returned 0 after 976 usecs
calling init_dvbdev+0x0/0xc2 @ 1
initcall init_dvbdev+0x0/0xc2 returned 0 after 0 usecs
calling pps_init+0x0/0xa6 @ 1pps_core: LinuxPPS API ver. 1 registeredpps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> initcall pps_init+0x0/0xa6 returned 0 after 1953 usecs
calling ptp_init+0x0/0x8c @ 1
PTP clock support registered
initcall ptp_init+0x0/0x8c returned 0 after 976 usecs
calling power_supply_class_init+0x0/0x35 @ 1
initcall power_supply_class_init+0x0/0x35 returned 0 after 0 usecs
calling hwmon_init+0x0/0xea @ 1
initcall hwmon_init+0x0/0xea returned 0 after 976 usecs
calling mmc_init+0x0/0x80 @ 1
initcall mmc_init+0x0/0x80 returned 0 after 0 usecs
calling leds_init+0x0/0x32 @ 1
initcall leds_init+0x0/0x32 returned 0 after 0 usecs
calling iio_init+0x0/0x85 @ 1
initcall iio_init+0x0/0x85 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x44 @ 1
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00pci_bus 0000:00: root bus resource [io 0x0000-0xffff]pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f] pci 0000:00:01.1: reg 0x20: [io 0x4c00-0x4c3f] pci 0000:00:01.1: reg 0x24: [io 0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 pci 0000:00:02.0: reg 0x10: [mem 0xda004000-0xda004fff] pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff] pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: [10de:0059] type 00 class 0x040100 pci 0000:00:04.0: reg 0x10: [io 0xdc00-0xdcff] pci 0000:00:04.0: reg 0x14: [io 0xe000-0xe0ff] pci 0000:00:04.0: reg 0x18: [mem 0xda003000-0xda003fff] pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7] pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3] pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977] pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73] pci 0000:00:07.0: reg 0x20: [io 0xd800-0xd80f] pci 0000:00:07.0: reg 0x24: [mem 0xda002000-0xda002fff] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7] pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3] pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967] pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63] pci 0000:00:08.0: reg 0x20: [io 0xc400-0xc40f]
pci 0000:00:08.0: reg 0x24: [mem 0xda001000-0xda001fff] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 pci 0000:00:0a.0: reg 0x10: [mem 0xda000000-0xda000fff] pci 0000:00:0a.0: reg 0x14: [io 0xb000-0xb007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:00:09.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 04]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 02]
pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000 pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:01:00.0: reg 0x14: [io 0xa000-0xa0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xd9000000-0xd900ffff] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000 pci 0000:01:00.1: reg 0x10: [mem 0xd9010000-0xd901ffff] pci 0000:01:00.1: supports D1 D2
pci 0000:00:0e.0: PCI bridge to [bus 01]
pci 0000:00:0e.0: bridge window [io 0xa000-0xafff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 05 pci 0000:00:00.0: default IRQ router [10de:005e]
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff] initcall pci_subsys_init+0x0/0x44 returned 0 after 85937 usecs calling proto_init+0x0/0xf @ 1
initcall proto_init+0x0/0xf returned 0 after 0 usecs calling net_dev_init+0x0/0x197 @ 1
initcall net_dev_init+0x0/0x197 returned 0 after 0 usecs calling neigh_init+0x0/0xa4 @ 1
initcall neigh_init+0x0/0xa4 returned 0 after 0 usecs calling fib_rules_init+0x0/0xbd @ 1
initcall fib_rules_init+0x0/0xbd returned 0 after 0 usecs calling genl_init+0x0/0x76 @ 1
initcall genl_init+0x0/0x76 returned 0 after 0 usecs calling cipso_v4_init+0x0/0x76 @ 1
initcall cipso_v4_init+0x0/0x76 returned 0 after 0 usecs calling irda_init+0x0/0x88 @ 1
NET: Registered protocol family 23
initcall irda_init+0x0/0x88 returned 0 after 976 usecs calling bt_init+0x0/0x89 @ 1
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
initcall bt_init+0x0/0x89 returned 0 after 5859 usecs calling atm_init+0x0/0xd0 @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0xd0 returned 0 after 1953 usecs calling cfg80211_init+0x0/0xd7 @ 1
cfg80211: Calling CRDA to update world regulatory domain initcall cfg80211_init+0x0/0xd7 returned 0 after 1953 usecs calling wireless_nlevent_init+0x0/0xf @ 1
initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs calling ieee80211_init+0x0/0xa @ 1
initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs calling netlbl_init+0x0/0x7d @ 1
NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x7d returned 0 after 3906 usecs
calling wpan_phy_class_init+0x0/0x33 @ 1
initcall wpan_phy_class_init+0x0/0x33 returned 0 after 0 usecs calling nfc_init+0x0/0x8f @ 1
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
initcall nfc_init+0x0/0x8f returned 0 after 1953 usecs
calling nfc_hci_init+0x0/0xa @ 1
initcall nfc_hci_init+0x0/0xa returned 0 after 0 usecs
calling nmi_warning_debugfs+0x0/0x24 @ 1
initcall nmi_warning_debugfs+0x0/0x24 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x3b @ 1
Switched to clocksource pit
initcall clocksource_done_booting+0x0/0x3b returned 0 after 1025 usecs calling tracer_init_debugfs+0x0/0x158 @ 1
initcall tracer_init_debugfs+0x0/0x158 returned 0 after 608 usecs calling init_trace_printk_function_export+0x0/0x33 @ 1
initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 14 usecs calling event_trace_init+0x0/0x1bb @ 1
initcall event_trace_init+0x0/0x1bb returned 0 after 98030 usecs calling init_uprobe_trace+0x0/0x59 @ 1
initcall init_uprobe_trace+0x0/0x59 returned 0 after 28 usecs calling init_pipe_fs+0x0/0x3d @ 1
initcall init_pipe_fs+0x0/0x3d returned 0 after 103 usecs
calling eventpoll_init+0x0/0x10d @ 1
initcall eventpoll_init+0x0/0x10d returned 0 after 42 usecs calling anon_inode_init+0x0/0x52 @ 1
initcall anon_inode_init+0x0/0x52 returned 0 after 62 usecs calling fscache_init+0x0/0x193 @ 1
FS-Cache: Loaded
initcall fscache_init+0x0/0x193 returned 0 after 1112 usecs calling cachefiles_init+0x0/0x99 @ 1
CacheFiles: Loaded
initcall cachefiles_init+0x0/0x99 returned 0 after 1510 usecs calling tomoyo_initerface_init+0x0/0x17c @ 1
initcall tomoyo_initerface_init+0x0/0x17c returned 0 after 200 usecs calling aa_create_aafs+0x0/0xa7 @ 1
initcall aa_create_aafs+0x0/0xa7 returned 0 after 4 usecs
calling blk_scsi_ioctl_init+0x0/0x288 @ 1
initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 4 usecs calling dynamic_debug_init_debugfs+0x0/0x6a @ 1
initcall dynamic_debug_init_debugfs+0x0/0x6a returned 0 after 26 usecs calling pnp_system_init+0x0/0xf @ 1
initcall pnp_system_init+0x0/0xf returned 0 after 39 usecs calling pnpbios_init+0x0/0x337 @ 1
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xb00fc550
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc580, dseg 0xf0000 pnp 00:00: [irq 2]
pnp 00:00: [io 0x0020-0x0021]
pnp 00:00: [io 0x00a0-0x00a1]
pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f-0x0091] pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active) pnp 00:02: [irq 0]
pnp 00:02: [io 0x0040-0x0043]
pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active) pnp 00:03: [irq 8]
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active) pnp 00:04: [irq 1]
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active) pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active) pnp 00:06: [irq 13]
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active) pnp 00:07: [mem 0x00000000-0x0009ffff]
pnp 00:07: [mem 0xfffe0000-0xffffffff]
pnp 00:07: [mem 0xfec00000-0xfec0ffff]
pnp 00:07: [mem 0xfee00000-0xfeefffff]
pnp 00:07: [mem 0xfefffc00-0xfeffffff]
pnp 00:07: [mem 0x00100000-0x00ffffff]
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved system 00:07: [mem 0xfffe0000-0xffffffff] has been reserved system 00:07: [mem 0xfec00000-0xfec0ffff] has been reserved system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved system 00:07: [mem 0xfefffc00-0xfeffffff] has been reserved system 00:07: [mem 0x00100000-0x00ffffff] could not be reserved system 00:07: Plug and Play BIOS device, IDs PNP0c01 (active) pnp 00:08: [mem 0x000f0000-0x000f3fff]
pnp 00:08: [mem 0x000f4000-0x000f7fff]
pnp 00:08: [mem 0x000f8000-0x000fbfff]
pnp 00:08: [mem 0x000fc000-0x000fffff]
system 00:08: [mem 0x000f0000-0x000f3fff] could not be reserved system 00:08: [mem 0x000f4000-0x000f7fff] could not be reserved system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved system 00:08: Plug and Play BIOS device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0290-0x029f] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x0cf8-0x0cff]
pnp 00:09: Plug and Play BIOS device, IDs PNP0a03 (active) pnp 00:0b: [irq 4]
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: Plug and Play BIOS device, IDs PNP0501 (active) pnp 00:0c: [dma 2]
pnp 00:0c: [io 0x03f0-0x03f5]
pnp 00:0c: [io 0x03f7]
pnp 00:0c: [irq 6]
pnp 00:0c: Plug and Play BIOS device, IDs PNP0700 (active) pnp 00:0e: [dma 3]
pnp 00:0e: [irq 7]
pnp 00:0e: [io 0x0378-0x037f]
pnp 00:0e: [io 0x0778-0x077f]
pnp 00:0e: Plug and Play BIOS device, IDs PNP0401 (active) pnp 00:0f: [irq 10]
pnp 00:0f: [io 0x0330-0x0333]
pnp 00:0f: Plug and Play BIOS device, IDs PNPb006 (active) pnp 00:10: [io 0x0201]
pnp 00:10: Plug and Play BIOS device, IDs PNPb02f (active)
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver initcall pnpbios_init+0x0/0x337 returned 0 after 76635 usecs calling chr_dev_init+0x0/0xc3 @ 1
initcall chr_dev_init+0x0/0xc3 returned 0 after 5687 usecs calling firmware_class_init+0x0/0x109 @ 1
initcall firmware_class_init+0x0/0x109 returned 0 after 29 usecs calling init_pcmcia_bus+0x0/0x5e @ 1
initcall init_pcmcia_bus+0x0/0x5e returned 0 after 55 usecs calling thermal_init+0x0/0xb5 @ 1
initcall thermal_init+0x0/0xb5 returned 0 after 85 usecs calling ssb_modinit+0x0/0x3f @ 1
initcall ssb_modinit+0x0/0x3f returned 0 after 39 usecs calling pcibios_assign_resources+0x0/0x8f @ 1
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: PCI bridge to [bus 04]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 02]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref] pci 0000:00:0e.0: PCI bridge to [bus 01]
pci 0000:00:0e.0: bridge window [io 0xa000-0xafff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]pci_bus 0000:05: resource 4 [io 0x0000-0xffff]pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]pci_bus 0000:01: resource 0 [io 0xa000-0xafff]pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
initcall pcibios_assign_resources+0x0/0x8f returned 0 after 16287 usecs calling sysctl_core_init+0x0/0x23 @ 1
initcall sysctl_core_init+0x0/0x23 returned 0 after 36 usecs
calling inet_init+0x0/0x26f @ 1
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 3, 40960 bytes)
UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
initcall inet_init+0x0/0x26f returned 0 after 8885 usecs
calling ipv4_offload_init+0x0/0x4e @ 1
initcall ipv4_offload_init+0x0/0x4e returned 0 after 11 usecs
calling af_unix_init+0x0/0x4d @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4d returned 0 after 1086 usecs
calling ipv6_offload_init+0x0/0x6b @ 1
initcall ipv6_offload_init+0x0/0x6b returned 0 after 4 usecs
calling init_sunrpc+0x0/0x64 @ 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x64 returned 0 after 4243 usecs
calling pci_apply_final_quirks+0x0/0x10f @ 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x10f returned 0 after 74263 usecs calling populate_rootfs+0x0/0x93 @ 1
initcall populate_rootfs+0x0/0x93 returned 0 after 307 usecs
calling pci_iommu_init+0x0/0x34 @ 1
initcall pci_iommu_init+0x0/0x34 returned 0 after 4 usecs
calling i8259A_init_ops+0x0/0x20 @ 1
initcall i8259A_init_ops+0x0/0x20 returned 0 after 4 usecs
calling sbf_init+0x0/0xc9 @ 1
initcall sbf_init+0x0/0xc9 returned 0 after 4 usecs
calling init_tsc_clocksource+0x0/0xac @ 1
initcall init_tsc_clocksource+0x0/0xac returned 0 after 24 usecs
calling add_rtc_cmos+0x0/0x84 @ 1
initcall add_rtc_cmos+0x0/0x84 returned 0 after 5 usecs
calling i8237A_init_ops+0x0/0x11 @ 1
initcall i8237A_init_ops+0x0/0x11 returned 0 after 4 usecs
calling cache_sysfs_init+0x0/0x1c4 @ 1
initcall cache_sysfs_init+0x0/0x1c4 returned 0 after 4 usecs
calling thermal_throttle_init_device+0x0/0xb8 @ 1
initcall thermal_throttle_init_device+0x0/0xb8 returned 0 after 4 usecs calling amd_ibs_init+0x0/0x1ce @ 1
initcall amd_ibs_init+0x0/0x1ce returned -19 after 4 usecs
calling cpuid_init+0x0/0xe7 @ 1
initcall cpuid_init+0x0/0xe7 returned 0 after 188 usecs
calling ioapic_init_ops+0x0/0x11 @ 1
initcall ioapic_init_ops+0x0/0x11 returned 0 after 4 usecs
calling add_pcspkr+0x0/0x3c @ 1
initcall add_pcspkr+0x0/0x3c returned 0 after 67 usecs
calling start_periodic_check_for_corruption+0x0/0x54 @ 1
Scanning for low memory corruption every 60 seconds
initcall start_periodic_check_for_corruption+0x0/0x54 returned 0 after 1177 usecs calling add_bus_probe+0x0/0x21 @ 1
initcall add_bus_probe+0x0/0x21 returned 0 after 4 usecs
calling sysfb_init+0x0/0x80 @ 1
initcall sysfb_init+0x0/0x80 returned 0 after 57 usecs
calling start_pageattr_test+0x0/0x4b @ 1
initcall start_pageattr_test+0x0/0x4b returned 0 after 104 usecs
calling pt_dump_init+0x0/0x6d @ 1
initcall pt_dump_init+0x0/0x6d returned 0 after 19 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 196 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 178 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 55 usecs
calling aesni_init+0x0/0x32 @ 1
initcall aesni_init+0x0/0x32 returned -19 after 4 usecs
calling crc32c_intel_mod_init+0x0/0x24 @ 1
initcall crc32c_intel_mod_init+0x0/0x24 returned -19 after 4 usecs
calling crc32_pclmul_mod_init+0x0/0x31 @ 1
PCLMULQDQ-NI instructions are not detected.
initcall crc32_pclmul_mod_init+0x0/0x31 returned -19 after 798 usecs
calling net5501_init+0x0/0x104 @ 1
initcall net5501_init+0x0/0x104 returned 0 after 4 usecs
calling goldfish_init+0x0/0x3f @ 1
initcall goldfish_init+0x0/0x3f returned 0 after 65 usecs
calling iris_init+0x0/0xb1 @ 1
The force parameter has not been set to 1. The Iris poweroff handler will not be installed. initcall iris_init+0x0/0xb1 returned -19 after 1113 usecs
calling olpc_create_platform_devices+0x0/0x1c @ 1
initcall olpc_create_platform_devices+0x0/0x1c returned 0 after 4 usecs calling scx200_init+0x0/0x23 @ 1
NatSemi SCx200 Driver
initcall scx200_init+0x0/0x23 returned 0 after 1028 usecs
calling proc_execdomains_init+0x0/0x27 @ 1
initcall proc_execdomains_init+0x0/0x27 returned 0 after 14 usecs
calling ioresources_init+0x0/0x44 @ 1
initcall ioresources_init+0x0/0x44 returned 0 after 19 usecs
calling uid_cache_init+0x0/0x81 @ 1
initcall uid_cache_init+0x0/0x81 returned 0 after 27 usecs
calling init_posix_timers+0x0/0x1dd @ 1
initcall init_posix_timers+0x0/0x1dd returned 0 after 16 usecs
calling init_posix_cpu_timers+0x0/0x9b @ 1
initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 4 usecs
calling init_sched_debug_procfs+0x0/0x30 @ 1
initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 12 usecs
calling irq_gc_init_ops+0x0/0x11 @ 1
initcall irq_gc_init_ops+0x0/0x11 returned 0 after 4 usecs
calling irq_debugfs_init+0x0/0x30 @ 1
initcall irq_debugfs_init+0x0/0x30 returned 0 after 16 usecs
calling irq_pm_init_ops+0x0/0x11 @ 1
initcall irq_pm_init_ops+0x0/0x11 returned 0 after 17 usecs
calling timekeeping_init_ops+0x0/0x11 @ 1
initcall timekeeping_init_ops+0x0/0x11 returned 0 after 4 usecs
calling init_clocksource_sysfs+0x0/0x58 @ 1
initcall init_clocksource_sysfs+0x0/0x58 returned 0 after 108 usecs
calling init_timer_list_procfs+0x0/0x30 @ 1
initcall init_timer_list_procfs+0x0/0x30 returned 0 after 12 usecs
calling alarmtimer_init+0x0/0x168 @ 1
initcall alarmtimer_init+0x0/0x168 returned 0 after 109 usecs
calling clockevents_init_sysfs+0x0/0x7a @ 1
initcall clockevents_init_sysfs+0x0/0x7a returned 0 after 150 usecs
calling lockdep_proc_init+0x0/0x4a @ 1
initcall lockdep_proc_init+0x0/0x4a returned 0 after 19 usecs
calling futex_init+0x0/0x61 @ 1
initcall futex_init+0x0/0x61 returned 0 after 17 usecs
calling init_rttest+0x0/0x139 @ 1
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x139 returned 0 after 1478 usecs
calling proc_dma_init+0x0/0x27 @ 1
initcall proc_dma_init+0x0/0x27 returned 0 after 12 usecs
calling kallsyms_init+0x0/0x2a @ 1
initcall kallsyms_init+0x0/0x2a returned 0 after 18 usecs
calling backtrace_regression_test+0x0/0xdb @ 1
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 b1069b79 b1069b79 b010debc b010debc b235a604 b235a604 b010def8 b010def8 b1069ba8 b1069ba8 b2871e98 b2871e98 00000282 00000282 00d17a94 00d17a94
00000976 00000976 b2c82480 b2c82480 000006aa 000006aa b010def8 b010def8 b105c5f4 b105c5f4 00000001 00000001 00000000 00000000 00000000 00000000
b1069b79 b1069b79 000006aa 000006aa b010df78 b010df78 b2d05af4 b2d05af4 b2cc09a0 b2cc09a0 b2864daa b2864daa b1069b79 b1069b79 00000001 00000001
Call Trace: [<b1069b79>] ? backtrace_test_irq_callback+0x14/0x14 [<b235a604>] dump_stack+0x16/0x18 [<b1069ba8>] backtrace_regression_test+0x2f/0xdb [<b105c5f4>] ? ktime_get+0x58/0xc6 [<b1069b79>] ? backtrace_test_irq_callback+0x14/0x14 [<b2d05af4>] do_one_initcall+0x72/0x14e [<b1069b79>] ? backtrace_test_irq_callback+0x14/0x14 [<b103eedc>] ? parse_args+0x243/0x384 [<b1038bed>] ? __usermodehelper_set_disable_depth+0x3c/0x42 [<b2d05ca6>] kernel_init_freeable+0xd6/0x178 [<b2d05475>] ? loglevel+0x2b/0x2b [<b2350e9e>] kernel_init+0xb/0xc3 [<b23735d7>] ret_from_kernel_thread+0x1b/0x28 [<b2350e93>] ? rest_init+0xb7/0xb7 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 00000006 00000006 b012feb8 b012feb8 b235a604 b235a604 b012fec0 b012fec0 b1069b6d b1069b6d b012fecc b012fecc b102be74 b102be74 00000040 00000040
b012ff0c b012ff0c b102ba58 b102ba58 b012fedc b012fedc 00000046 00000046 b1049660 b1049660 b012ff58 b012ff58 00000286 00000286 b012ff48 b012ff48
04208040 04208040 fffb712d fffb712d 0000000a 0000000a 00000100 00000100 00000001 00000001 b0055a20 b0055a20 b2b5db40 b2b5db40 b01137a0 b01137a0
Call Trace: [<b235a604>] dump_stack+0x16/0x18 [<b1069b6d>] backtrace_test_irq_callback+0x8/0x14 [<b102be74>] tasklet_action+0x65/0x6a [<b102ba58>] __do_softirq+0xa9/0x1e8 [<b1049660>] ? complete+0x42/0x4a [<b102bbae>] run_ksoftirqd+0x17/0x3a [<b1046629>] smpboot_thread_fn+0x101/0x117 [<b1046528>] ? lg_global_unlock+0x29/0x29 [<b1040519>] kthread+0x8e/0x9a [<b23735d7>] ret_from_kernel_thread+0x1b/0x28 [<b104048b>] ? __kthread_unpark+0x29/0x29 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [<b100a677>] save_stack_trace+0x2a/0x44 [<b100a677>] save_stack_trace+0x2a/0x44 [<b1069c37>] backtrace_regression_test+0xbe/0xdb [<b1069c37>] backtrace_regression_test+0xbe/0xdb [<b2d05af4>] do_one_initcall+0x72/0x14e [<b2d05af4>] do_one_initcall+0x72/0x14e [<b2d05ca6>] kernel_init_freeable+0xd6/0x178 [<b2d05ca6>] kernel_init_freeable+0xd6/0x178 [<b2350e9e>] kernel_init+0xb/0xc3 [<b2350e9e>] kernel_init+0xb/0xc3 [<b23735d7>] ret_from_kernel_thread+0x1b/0x28 [<b23735d7>] ret_from_kernel_thread+0x1b/0x28 [<ffffffff>] 0xffffffff
[<ffffffff>] 0xffffffff
====[ end of backtrace testing ]====
initcall backtrace_regression_test+0x0/0xdb returned 0 after 95106 usecs
calling audit_init+0x0/0x14c @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1381004849.342:1): initialized
initcall audit_init+0x0/0x14c returned 0 after 2452 usecs
calling audit_watch_init+0x0/0x31 @ 1
initcall audit_watch_init+0x0/0x31 returned 0 after 13 usecs
calling audit_tree_init+0x0/0x42 @ 1
initcall audit_tree_init+0x0/0x42 returned 0 after 10 usecs
calling hung_task_init+0x0/0x56 @ 1
initcall hung_task_init+0x0/0x56 returned 0 after 44 usecs
calling utsname_sysctl_init+0x0/0x11 @ 1
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 19 usecs
calling init_mmio_trace+0x0/0xf @ 1
initcall init_mmio_trace+0x0/0xf returned 0 after 5 usecs
calling init_blk_tracer+0x0/0x54 @ 1
initcall init_blk_tracer+0x0/0x54 returned 0 after 6 usecs
calling perf_event_sysfs_init+0x0/0x91 @ 1
initcall perf_event_sysfs_init+0x0/0x91 returned 0 after 184 usecs
calling init_uprobes+0x0/0x4f @ 1
initcall init_uprobes+0x0/0x4f returned 0 after 18 usecs
calling init_per_zone_wmark_min+0x0/0x9a @ 1
initcall init_per_zone_wmark_min+0x0/0x9a returned 0 after 68 usecs
calling kswapd_init+0x0/0x13 @ 1
initcall kswapd_init+0x0/0x13 returned 0 after 46 usecs
calling extfrag_debug_init+0x0/0x7d @ 1
initcall extfrag_debug_init+0x0/0x7d returned 0 after 40 usecs
calling setup_vmstat+0x0/0x8a @ 1
initcall setup_vmstat+0x0/0x8a returned 0 after 35 usecs
calling mm_sysfs_init+0x0/0x22 @ 1
initcall mm_sysfs_init+0x0/0x22 returned 0 after 8 usecs
calling slab_proc_init+0x0/0x2a @ 1
initcall slab_proc_init+0x0/0x2a returned 0 after 11 usecs
calling init_reserve_notifier+0x0/0x7 @ 1
initcall init_reserve_notifier+0x0/0x7 returned 0 after 4 usecs
calling init_admin_reserve+0x0/0x25 @ 1
initcall init_admin_reserve+0x0/0x25 returned 0 after 4 usecs
calling init_user_reserve+0x0/0x25 @ 1
initcall init_user_reserve+0x0/0x25 returned 0 after 4 usecs
calling proc_vmalloc_init+0x0/0x2a @ 1
initcall proc_vmalloc_init+0x0/0x2a returned 0 after 12 usecs
calling ksm_init+0x0/0x15b @ 1
initcall ksm_init+0x0/0x15b returned 0 after 114 usecs
calling slab_proc_init+0x0/0x7 @ 1
initcall slab_proc_init+0x0/0x7 returned 0 after 3 usecs
calling cpucache_init+0x0/0xcc @ 1
initcall cpucache_init+0x0/0xcc returned 0 after 4 usecs
calling hugepage_init+0x0/0x125 @ 1
initcall hugepage_init+0x0/0x125 returned 0 after 146 usecs
calling pfn_inject_init+0x0/0x131 @ 1
initcall pfn_inject_init+0x0/0x131 returned 0 after 95 usecs
calling fcntl_init+0x0/0x2f @ 1
initcall fcntl_init+0x0/0x2f returned 0 after 15 usecs
calling proc_filesystems_init+0x0/0x27 @ 1
initcall proc_filesystems_init+0x0/0x27 returned 0 after 12 usecs
calling dio_init+0x0/0x32 @ 1
initcall dio_init+0x0/0x32 returned 0 after 14 usecs
calling fsnotify_mark_init+0x0/0x46 @ 1
initcall fsnotify_mark_init+0x0/0x46 returned 0 after 253 usecs
calling inotify_user_setup+0x0/0x78 @ 1
initcall inotify_user_setup+0x0/0x78 returned 0 after 25 usecs
calling fanotify_user_setup+0x0/0x5a @ 1
initcall fanotify_user_setup+0x0/0x5a returned 0 after 24 usecs
calling aio_setup+0x0/0x8a @ 1
initcall aio_setup+0x0/0x8a returned 0 after 30 usecs
calling proc_locks_init+0x0/0x27 @ 1
initcall proc_locks_init+0x0/0x27 returned 0 after 12 usecs
calling init_mbcache+0x0/0x11 @ 1
initcall init_mbcache+0x0/0x11 returned 0 after 4 usecs
calling dquot_init+0x0/0xfb @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xfb returned 0 after 1600 usecs
calling init_v1_quota_format+0x0/0xf @ 1
initcall init_v1_quota_format+0x0/0xf returned 0 after 12 usecs
calling init_v2_quota_format+0x0/0x1d @ 1
initcall init_v2_quota_format+0x0/0x1d returned 0 after 4 usecs
calling proc_cmdline_init+0x0/0x27 @ 1
initcall proc_cmdline_init+0x0/0x27 returned 0 after 12 usecs
calling proc_consoles_init+0x0/0x27 @ 1
initcall proc_consoles_init+0x0/0x27 returned 0 after 11 usecs
calling proc_cpuinfo_init+0x0/0x27 @ 1
initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 12 usecs
calling proc_devices_init+0x0/0x27 @ 1
initcall proc_devices_init+0x0/0x27 returned 0 after 13 usecs
calling proc_interrupts_init+0x0/0x27 @ 1
initcall proc_interrupts_init+0x0/0x27 returned 0 after 11 usecs
calling proc_loadavg_init+0x0/0x27 @ 1
initcall proc_loadavg_init+0x0/0x27 returned 0 after 12 usecs
calling proc_meminfo_init+0x0/0x27 @ 1
initcall proc_meminfo_init+0x0/0x27 returned 0 after 11 usecs
calling proc_stat_init+0x0/0x27 @ 1
initcall proc_stat_init+0x0/0x27 returned 0 after 12 usecs
calling proc_uptime_init+0x0/0x27 @ 1
initcall proc_uptime_init+0x0/0x27 returned 0 after 11 usecs
calling proc_version_init+0x0/0x27 @ 1
initcall proc_version_init+0x0/0x27 returned 0 after 11 usecs
calling proc_softirqs_init+0x0/0x27 @ 1
initcall proc_softirqs_init+0x0/0x27 returned 0 after 11 usecs
calling proc_kcore_init+0x0/0x7e @ 1
initcall proc_kcore_init+0x0/0x7e returned 0 after 20 usecs
calling proc_kmsg_init+0x0/0x2a @ 1
initcall proc_kmsg_init+0x0/0x2a returned 0 after 12 usecs
calling proc_page_init+0x0/0x4a @ 1
initcall proc_page_init+0x0/0x4a returned 0 after 19 usecs
calling configfs_init+0x0/0xa8 @ 1
initcall configfs_init+0x0/0xa8 returned 0 after 23 usecs
calling init_devpts_fs+0x0/0x52 @ 1
initcall init_devpts_fs+0x0/0x52 returned 0 after 82 usecs
calling init_reiserfs_fs+0x0/0x70 @ 1
initcall init_reiserfs_fs+0x0/0x70 returned 0 after 27 usecs
calling init_ext3_fs+0x0/0x76 @ 1
initcall init_ext3_fs+0x0/0x76 returned 0 after 48 usecs
calling init_ext2_fs+0x0/0x76 @ 1
initcall init_ext2_fs+0x0/0x76 returned 0 after 38 usecs
calling ext4_init_fs+0x0/0x1e6 @ 1
initcall ext4_init_fs+0x0/0x1e6 returned 0 after 161 usecs
calling journal_init+0x0/0xeb @ 1
initcall journal_init+0x0/0xeb returned 0 after 67 usecs
calling journal_init+0x0/0x120 @ 1
initcall journal_init+0x0/0x120 returned 0 after 87 usecs
calling init_ramfs_fs+0x0/0x45 @ 1
initcall init_ramfs_fs+0x0/0x45 returned 0 after 4 usecs
calling init_fat_fs+0x0/0x4c @ 1
initcall init_fat_fs+0x0/0x4c returned 0 after 26 usecs
calling init_vfat_fs+0x0/0xf @ 1
initcall init_vfat_fs+0x0/0xf returned 0 after 4 usecs
calling init_msdos_fs+0x0/0xf @ 1
initcall init_msdos_fs+0x0/0xf returned 0 after 4 usecs
calling init_iso9660_fs+0x0/0x66 @ 1
initcall init_iso9660_fs+0x0/0x66 returned 0 after 16 usecs
calling init_nfs_fs+0x0/0x159 @ 1
initcall init_nfs_fs+0x0/0x159 returned 0 after 432 usecs
calling init_nfs_v2+0x0/0x11 @ 1
initcall init_nfs_v2+0x0/0x11 returned 0 after 13 usecs
calling init_nfs_v4+0x0/0x40 @ 1
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
initcall init_nfs_v4+0x0/0x40 returned 0 after 3527 usecs
calling init_nfsd+0x0/0x113 @ 1
Installing knfsd (copyright (C) 1996 [email protected]).
initcall init_nfsd+0x0/0x113 returned 0 after 1421 usecs
calling init_nlm+0x0/0x3d @ 1
initcall init_nlm+0x0/0x3d returned 0 after 30 usecs
calling init_nls_cp437+0x0/0xf @ 1
initcall init_nls_cp437+0x0/0xf returned 0 after 13 usecs
calling init_nls_cp737+0x0/0xf @ 1
initcall init_nls_cp737+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp775+0x0/0xf @ 1
initcall init_nls_cp775+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp850+0x0/0xf @ 1
initcall init_nls_cp850+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp852+0x0/0xf @ 1
initcall init_nls_cp852+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp855+0x0/0xf @ 1
initcall init_nls_cp855+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp857+0x0/0xf @ 1
initcall init_nls_cp857+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp863+0x0/0xf @ 1
initcall init_nls_cp863+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp865+0x0/0xf @ 1
initcall init_nls_cp865+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp866+0x0/0xf @ 1
initcall init_nls_cp866+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp869+0x0/0xf @ 1
initcall init_nls_cp869+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp936+0x0/0xf @ 1
initcall init_nls_cp936+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp949+0x0/0xf @ 1
initcall init_nls_cp949+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp950+0x0/0xf @ 1
initcall init_nls_cp950+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp1250+0x0/0xf @ 1
initcall init_nls_cp1250+0x0/0xf returned 0 after 17 usecs
calling init_nls_ascii+0x0/0xf @ 1
initcall init_nls_ascii+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_1+0x0/0xf @ 1
initcall init_nls_iso8859_1+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_2+0x0/0xf @ 1
initcall init_nls_iso8859_2+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_4+0x0/0xf @ 1
initcall init_nls_iso8859_4+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_6+0x0/0xf @ 1
initcall init_nls_iso8859_6+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_7+0x0/0xf @ 1
initcall init_nls_iso8859_7+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp1255+0x0/0xf @ 1
initcall init_nls_cp1255+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_9+0x0/0xf @ 1
initcall init_nls_iso8859_9+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_13+0x0/0xf @ 1
initcall init_nls_iso8859_13+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_15+0x0/0xf @ 1
initcall init_nls_iso8859_15+0x0/0xf returned 0 after 4 usecs
calling init_nls_utf8+0x0/0x1f @ 1
initcall init_nls_utf8+0x0/0x1f returned 0 after 4 usecs
calling init_nls_macceltic+0x0/0xf @ 1
initcall init_nls_macceltic+0x0/0xf returned 0 after 4 usecs
calling init_nls_maccroatian+0x0/0xf @ 1
initcall init_nls_maccroatian+0x0/0xf returned 0 after 4 usecs
calling init_nls_maccyrillic+0x0/0xf @ 1
initcall init_nls_maccyrillic+0x0/0xf returned 0 after 4 usecs
calling init_nls_macgreek+0x0/0xf @ 1
initcall init_nls_macgreek+0x0/0xf returned 0 after 4 usecs
calling init_nls_maciceland+0x0/0xf @ 1
initcall init_nls_maciceland+0x0/0xf returned 0 after 17 usecs
calling init_nls_macinuit+0x0/0xf @ 1
initcall init_nls_macinuit+0x0/0xf returned 0 after 4 usecs
calling init_nls_macromanian+0x0/0xf @ 1
initcall init_nls_macromanian+0x0/0xf returned 0 after 4 usecs
calling init_cifs+0x0/0x45a @ 1
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
initcall init_cifs+0x0/0x45a returned 0 after 2218 usecs
calling init_ncp_fs+0x0/0x66 @ 1
initcall init_ncp_fs+0x0/0x66 returned 0 after 23 usecs
calling init_ntfs_fs+0x0/0x23c @ 1
NTFS driver 2.1.30 [Flags: R/W DEBUG].
initcall init_ntfs_fs+0x0/0x23c returned 0 after 998 usecs
calling init_autofs4_fs+0x0/0x24 @ 1
initcall init_autofs4_fs+0x0/0x24 returned 0 after 102 usecs
calling fuse_init+0x0/0x19d @ 1
fuse init (API version 7.22)
initcall fuse_init+0x0/0x19d returned 0 after 1317 usecs
calling cuse_init+0x0/0x93 @ 1
initcall cuse_init+0x0/0x93 returned 0 after 90 usecs
calling init_udf_fs+0x0/0x66 @ 1
initcall init_udf_fs+0x0/0x66 returned 0 after 18 usecs
calling init_xfs_fs+0x0/0xcf @ 1
SGI XFS with security attributes, realtime, debug enabled
initcall init_xfs_fs+0x0/0xcf returned 0 after 1705 usecs
calling init_v9fs+0x0/0xf3 @ 1
9p: Installing v9fs 9p2000 file system support
FS-Cache: Netfs '9p' registered for caching
initcall init_v9fs+0x0/0xf3 returned 0 after 1137 usecs
calling init_btrfs_fs+0x0/0x11f @ 1
bio: create slab <bio-1> at 1
Btrfs loaded, assert=on
btrfs: selftest: Running btrfs free space cache tests
btrfs: selftest: Running extent only tests
btrfs: selftest: Running bitmap only tests
btrfs: selftest: Running bitmap and extent tests
btrfs: selftest: Free space cache tests finished
initcall init_btrfs_fs+0x0/0x11f returned 0 after 6991 usecs
calling init_ceph+0x0/0x146 @ 1
FS-Cache: Netfs 'ceph' registered for caching
ceph: loaded (mds proto 32)
initcall init_ceph+0x0/0x146 returned 0 after 2158 usecs
calling init_mqueue_fs+0x0/0x9e @ 1
initcall init_mqueue_fs+0x0/0x9e returned 0 after 115 usecs
calling key_proc_init+0x0/0x37 @ 1
initcall key_proc_init+0x0/0x37 returned 0 after 13 usecs
calling crypto_wq_init+0x0/0x41 @ 1
initcall crypto_wq_init+0x0/0x41 returned 0 after 50 usecs
calling crypto_algapi_init+0x0/0xc @ 1
initcall crypto_algapi_init+0x0/0xc returned 0 after 27 usecs
calling skcipher_module_init+0x0/0x11 @ 1
initcall skcipher_module_init+0x0/0x11 returned 0 after 3 usecs
calling chainiv_module_init+0x0/0xf @ 1
initcall chainiv_module_init+0x0/0xf returned 0 after 5 usecs
calling eseqiv_module_init+0x0/0xf @ 1
initcall eseqiv_module_init+0x0/0xf returned 0 after 4 usecs
calling seqiv_module_init+0x0/0xf @ 1
initcall seqiv_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_user_init+0x0/0x42 @ 1
initcall crypto_user_init+0x0/0x42 returned 0 after 26 usecs
calling crypto_cmac_module_init+0x0/0xf @ 1
initcall crypto_cmac_module_init+0x0/0xf returned 0 after 4 usecs
calling hmac_module_init+0x0/0xf @ 1
initcall hmac_module_init+0x0/0xf returned 0 after 4 usecs
calling vmac_module_init+0x0/0xf @ 1
initcall vmac_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_xcbc_module_init+0x0/0xf @ 1
initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_null_mod_init+0x0/0x41 @ 1
initcall crypto_null_mod_init+0x0/0x41 returned 0 after 289 usecs
calling md4_mod_init+0x0/0xf @ 1
initcall md4_mod_init+0x0/0xf returned 0 after 184 usecs
calling md5_mod_init+0x0/0xf @ 1
initcall md5_mod_init+0x0/0xf returned 0 after 176 usecs
calling rmd128_mod_init+0x0/0xf @ 1
initcall rmd128_mod_init+0x0/0xf returned 0 after 210 usecs
calling rmd160_mod_init+0x0/0xf @ 1
initcall rmd160_mod_init+0x0/0xf returned 0 after 229 usecs
calling rmd256_mod_init+0x0/0xf @ 1
initcall rmd256_mod_init+0x0/0xf returned 0 after 198 usecs
calling rmd320_mod_init+0x0/0xf @ 1
initcall rmd320_mod_init+0x0/0xf returned 0 after 214 usecs
calling sha1_generic_mod_init+0x0/0xf @ 1
initcall sha1_generic_mod_init+0x0/0xf returned 0 after 175 usecs
calling sha256_generic_mod_init+0x0/0x14 @ 1
initcall sha256_generic_mod_init+0x0/0x14 returned 0 after 351 usecs
calling sha512_generic_mod_init+0x0/0x14 @ 1
initcall sha512_generic_mod_init+0x0/0x14 returned 0 after 545 usecs
calling wp512_mod_init+0x0/0x14 @ 1
initcall wp512_mod_init+0x0/0x14 returned 0 after 1128 usecs
calling crypto_ecb_module_init+0x0/0xf @ 1
initcall crypto_ecb_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_cbc_module_init+0x0/0xf @ 1
initcall crypto_cbc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_pcbc_module_init+0x0/0xf @ 1
initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_module_init+0x0/0xf @ 1
initcall crypto_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_module_init+0x0/0xf @ 1
initcall crypto_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_ctr_module_init+0x0/0x33 @ 1
initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 4 usecs
calling crypto_gcm_module_init+0x0/0x95 @ 1
initcall crypto_gcm_module_init+0x0/0x95 returned 0 after 5 usecs
calling crypto_ccm_module_init+0x0/0x4d @ 1
initcall crypto_ccm_module_init+0x0/0x4d returned 0 after 4 usecs
calling des_generic_mod_init+0x0/0x14 @ 1
initcall des_generic_mod_init+0x0/0x14 returned 0 after 249 usecs
calling fcrypt_mod_init+0x0/0xf @ 1
initcall fcrypt_mod_init+0x0/0xf returned 0 after 111 usecs
calling serpent_mod_init+0x0/0x14 @ 1
initcall serpent_mod_init+0x0/0x14 returned 0 after 250 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 133 usecs
calling camellia_init+0x0/0xf @ 1
initcall camellia_init+0x0/0xf returned 0 after 126 usecs
calling cast5_mod_init+0x0/0xf @ 1
initcall cast5_mod_init+0x0/0xf returned 0 after 137 usecs
calling cast6_mod_init+0x0/0xf @ 1
initcall cast6_mod_init+0x0/0xf returned 0 after 139 usecs
calling arc4_init+0x0/0x14 @ 1
initcall arc4_init+0x0/0x14 returned 0 after 605 usecs
calling tea_mod_init+0x0/0x14 @ 1
initcall tea_mod_init+0x0/0x14 returned 0 after 329 usecs
calling anubis_mod_init+0x0/0xf @ 1
initcall anubis_mod_init+0x0/0xf returned 0 after 168 usecs
calling deflate_mod_init+0x0/0xf @ 1
initcall deflate_mod_init+0x0/0xf returned 0 after 527 usecs
calling zlib_mod_init+0x0/0xf @ 1
initcall zlib_mod_init+0x0/0xf returned 0 after 727 usecs
calling michael_mic_init+0x0/0xf @ 1
initcall michael_mic_init+0x0/0xf returned 0 after 234 usecs
calling crc32c_mod_init+0x0/0xf @ 1
initcall crc32c_mod_init+0x0/0xf returned 0 after 306 usecs
calling crc32_mod_init+0x0/0xf @ 1
alg: No test for crc32 (crc32-table)
initcall crc32_mod_init+0x0/0xf returned 0 after 609 usecs
calling crct10dif_mod_init+0x0/0xf @ 1
initcall crct10dif_mod_init+0x0/0xf returned 0 after 142 usecs
calling crypto_authenc_module_init+0x0/0xf @ 1
initcall crypto_authenc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_authenc_esn_module_init+0x0/0xf @ 1
initcall crypto_authenc_esn_module_init+0x0/0xf returned 0 after 4 usecs
calling lzo_mod_init+0x0/0xf @ 1
initcall lzo_mod_init+0x0/0xf returned 0 after 107 usecs
calling lz4_mod_init+0x0/0xf @ 1
alg: No test for lz4 (lz4-generic)
initcall lz4_mod_init+0x0/0xf returned 0 after 271 usecs
calling lz4hc_mod_init+0x0/0xf @ 1
alg: No test for lz4hc (lz4hc-generic)
initcall lz4hc_mod_init+0x0/0xf returned 0 after 946 usecs
calling krng_mod_init+0x0/0xf @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0xf returned 0 after 1546 usecs
calling prng_mod_init+0x0/0x14 @ 1
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
initcall prng_mod_init+0x0/0x14 returned 0 after 8854 usecs
calling ghash_mod_init+0x0/0xf @ 1
initcall ghash_mod_init+0x0/0xf returned 0 after 198 usecs
calling af_alg_init+0x0/0x35 @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x35 returned 0 after 1229 usecs
calling algif_hash_init+0x0/0xf @ 1
initcall algif_hash_init+0x0/0xf returned 0 after 13 usecs
calling asymmetric_key_init+0x0/0xf @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0xf returned 0 after 1527 usecs
calling proc_genhd_init+0x0/0x44 @ 1
initcall proc_genhd_init+0x0/0x44 returned 0 after 27 usecs
calling bsg_init+0x0/0x154 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
initcall bsg_init+0x0/0x154 returned 0 after 1127 usecs
calling noop_init+0x0/0xf @ 1
io scheduler noop registered (default)
initcall noop_init+0x0/0xf returned 0 after 928 usecs
calling deadline_init+0x0/0xf @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0xf returned 0 after 889 usecs
calling cfq_init+0x0/0x8b @ 1
io scheduler cfq registered
initcall cfq_init+0x0/0x8b returned 0 after 1019 usecs
calling test_kstrtox_init+0x0/0xb32 @ 1
initcall test_kstrtox_init+0x0/0xb32 returned -22 after 63 usecs
calling btree_module_init+0x0/0x2f @ 1
initcall btree_module_init+0x0/0x2f returned 0 after 18 usecs
calling crc_t10dif_mod_init+0x0/0x35 @ 1
initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 5 usecs
calling crc32test_init+0x0/0x339 @ 1
crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
crc32: self tests passed, processed 225944 bytes in 0 nsec
crc32c: CRC_LE_BITS = 8
crc32c: self tests passed, processed 225944 bytes in 0 nsec
initcall crc32test_init+0x0/0x339 returned 0 after 6803 usecs
calling libcrc32c_mod_init+0x0/0x24 @ 1
initcall libcrc32c_mod_init+0x0/0x24 returned 0 after 5 usecs
calling init_kmp+0x0/0xf @ 1
initcall init_kmp+0x0/0xf returned 0 after 13 usecs
calling init_bm+0x0/0xf @ 1
initcall init_bm+0x0/0xf returned 0 after 4 usecs
calling init_fsm+0x0/0xf @ 1
initcall init_fsm+0x0/0xf returned 0 after 4 usecs
calling audit_classes_init+0x0/0x4f @ 1
initcall audit_classes_init+0x0/0x4f returned 0 after 28 usecs
calling err_inject_init+0x0/0x1e @ 1
initcall err_inject_init+0x0/0x1e returned 0 after 25 usecs
calling digsig_init+0x0/0x36 @ 1
initcall digsig_init+0x0/0x36 returned 0 after 5 usecs
calling rbtree_test_init+0x0/0x208 @ 1
rbtree testingrbtree testing -> 20477 cycles
-> 20477 cycles
augmented rbtree testingaugmented rbtree testing -> 28701 cycles
-> 28701 cycles
initcall rbtree_test_init+0x0/0x208 returned -11 after 2519126 usecs
calling bgpio_driver_init+0x0/0x11 @ 1
initcall bgpio_driver_init+0x0/0x11 returned 0 after 40 usecs
calling adnp_i2c_driver_init+0x0/0x11 @ 1
initcall adnp_i2c_driver_init+0x0/0x11 returned 0 after 52 usecs
calling adp5588_gpio_driver_init+0x0/0x11 @ 1
initcall adp5588_gpio_driver_init+0x0/0x11 returned 0 after 25 usecs
calling amd_gpio_init+0x0/0x155 @ 1
initcall amd_gpio_init+0x0/0x155 returned -19 after 19 usecs
calling bt8xxgpio_pci_driver_init+0x0/0x16 @ 1
initcall bt8xxgpio_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling cs5535_gpio_driver_init+0x0/0x11 @ 1
initcall cs5535_gpio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling grgpio_driver_init+0x0/0x11 @ 1
initcall grgpio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling ichx_gpio_driver_init+0x0/0x11 @ 1
initcall ichx_gpio_driver_init+0x0/0x11 returned 0 after 26 usecs
calling it8761e_gpio_init+0x0/0x180 @ 1
initcall it8761e_gpio_init+0x0/0x180 returned -19 after 46 usecs
calling ttl_driver_init+0x0/0x11 @ 1
initcall ttl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling kempld_gpio_driver_init+0x0/0x11 @ 1
initcall kempld_gpio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling lnw_gpio_init+0x0/0x16 @ 1
initcall lnw_gpio_init+0x0/0x16 returned 0 after 40 usecs
calling ioh_gpio_driver_init+0x0/0x16 @ 1
initcall ioh_gpio_driver_init+0x0/0x16 returned 0 after 32 usecs
calling pch_gpio_driver_init+0x0/0x16 @ 1
initcall pch_gpio_driver_init+0x0/0x16 returned 0 after 33 usecs
calling sch_gpio_driver_init+0x0/0x11 @ 1
initcall sch_gpio_driver_init+0x0/0x11 returned 0 after 33 usecs
calling sdv_gpio_driver_init+0x0/0x16 @ 1
initcall sdv_gpio_driver_init+0x0/0x16 returned 0 after 33 usecs
calling timbgpio_platform_driver_init+0x0/0x11 @ 1
initcall timbgpio_platform_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ts5500_dio_driver_init+0x0/0x11 @ 1
initcall ts5500_dio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling gpo_twl6040_driver_init+0x0/0x11 @ 1
initcall gpo_twl6040_driver_init+0x0/0x11 returned 0 after 27 usecs
calling vx855gpio_driver_init+0x0/0x11 @ 1
initcall vx855gpio_driver_init+0x0/0x11 returned 0 after 33 usecs
calling pca9685_i2c_driver_init+0x0/0x11 @ 1
initcall pca9685_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs
calling twl_pwmled_driver_init+0x0/0x11 @ 1
initcall twl_pwmled_driver_init+0x0/0x11 returned 0 after 27 usecs
calling pci_proc_init+0x0/0x64 @ 1
initcall pci_proc_init+0x0/0x64 returned 0 after 222 usecs
calling pci_hotplug_init+0x0/0x4f @ 1pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x4f returned 0 after 500 usecs
calling cpcihp_generic_init+0x0/0x428 @ 1cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1cpcihp_generic: not configured, disabling.
initcall cpcihp_generic_init+0x0/0x428 returned -22 after 2431 usecs
calling shpcd_init+0x0/0x5f @ 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x5f returned 0 after 750 usecs
calling fb_console_init+0x0/0x108 @ 1
initcall fb_console_init+0x0/0x108 returned 0 after 66 usecs
calling pm860x_backlight_driver_init+0x0/0x11 @ 1
initcall pm860x_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs
calling bd6107_driver_init+0x0/0x11 @ 1
initcall bd6107_driver_init+0x0/0x11 returned 0 after 31 usecs
calling da903x_backlight_driver_init+0x0/0x11 @ 1
initcall da903x_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs
calling gpio_backlight_driver_init+0x0/0x11 @ 1
initcall gpio_backlight_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lm3533_bl_driver_init+0x0/0x11 @ 1
initcall lm3533_bl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling lm3630_i2c_driver_init+0x0/0x11 @ 1
initcall lm3630_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lp8788_bl_driver_init+0x0/0x11 @ 1
initcall lp8788_bl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling ot200_backlight_driver_init+0x0/0x11 @ 1
initcall ot200_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs
calling pandora_backlight_driver_init+0x0/0x11 @ 1
initcall pandora_backlight_driver_init+0x0/0x11 returned 0 after 26 usecs
calling kb3886_init+0x0/0xa @ 1
initcall kb3886_init+0x0/0xa returned -19 after 4 usecs
calling tps65217_bl_driver_init+0x0/0x11 @ 1
initcall tps65217_bl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling arcfb_init+0x0/0x66 @ 1
initcall arcfb_init+0x0/0x66 returned -6 after 4 usecs
calling pm2fb_init+0x0/0x120 @ 1
initcall pm2fb_init+0x0/0x120 returned 0 after 40 usecs
calling i740fb_init+0x0/0x99 @ 1
initcall i740fb_init+0x0/0x99 returned 0 after 34 usecs
calling matroxfb_init+0x0/0x24b @ 1
initcall matroxfb_init+0x0/0x24b returned 0 after 49 usecs
calling i2c_matroxfb_init+0x0/0x29 @ 1
initcall i2c_matroxfb_init+0x0/0x29 returned 0 after 4 usecs
calling rivafb_init+0x0/0x18e @ 1rivafb_setup START
initcall rivafb_init+0x0/0x18e returned 0 after 516 usecs
calling nvidiafb_init+0x0/0x288 @ 1nvidiafb_setup START
initcall nvidiafb_init+0x0/0x288 returned 0 after 842 usecs
calling aty128fb_init+0x0/0x111 @ 1
initcall aty128fb_init+0x0/0x111 returned 0 after 38 usecs
calling savagefb_init+0x0/0x5e @ 1
initcall savagefb_init+0x0/0x5e returned 0 after 41 usecs
calling neofb_init+0x0/0x11d @ 1
initcall neofb_init+0x0/0x11d returned 0 after 34 usecs
calling tdfxfb_init+0x0/0x105 @ 1
initcall tdfxfb_init+0x0/0x105 returned 0 after 33 usecs
calling imsttfb_init+0x0/0xdd @ 1
initcall imsttfb_init+0x0/0xdd returned 0 after 34 usecs
calling vt8623fb_init+0x0/0x6c @ 1
initcall vt8623fb_init+0x0/0x6c returned 0 after 33 usecs
calling tridentfb_init+0x0/0x1db @ 1
initcall tridentfb_init+0x0/0x1db returned 0 after 36 usecs
calling vmlfb_init+0x0/0x82 @ 1
vmlfb: initializing
initcall vmlfb_init+0x0/0x82 returned 0 after 679 usecs
calling cr_pll_init+0x0/0xd3 @ 1
Could not find Carillo Ranch MCH device.
initcall cr_pll_init+0x0/0xd3 returned -19 after 1266 usecs
calling s3fb_init+0x0/0xf1 @ 1
initcall s3fb_init+0x0/0xf1 returned 0 after 34 usecs
calling arkfb_init+0x0/0x6c @ 1
initcall arkfb_init+0x0/0x6c returned 0 after 33 usecs
calling hecubafb_init+0x0/0x11 @ 1
initcall hecubafb_init+0x0/0x11 returned 0 after 33 usecs
calling n411_init+0x0/0x7f @ 1
no IO addresses supplied
initcall n411_init+0x0/0x7f returned -22 after 1501 usecs
calling hgafb_init+0x0/0x6f @ 1
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
initcall hgafb_init+0x0/0x6f returned 0 after 2499 usecs
calling sstfb_init+0x0/0x176 @ 1
initcall sstfb_init+0x0/0x176 returned 0 after 40 usecs
calling s1d13xxxfb_init+0x0/0x28 @ 1
initcall s1d13xxxfb_init+0x0/0x28 returned 0 after 27 usecs
calling sm501fb_driver_init+0x0/0x11 @ 1
initcall sm501fb_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ufx_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver smscufx
initcall ufx_driver_init+0x0/0x16 returned 0 after 670 usecs
calling carminefb_init+0x0/0x33 @ 1
initcall carminefb_init+0x0/0x33 returned 0 after 33 usecs
calling ssd1307fb_driver_init+0x0/0x11 @ 1
initcall ssd1307fb_driver_init+0x0/0x11 returned 0 after 40 usecs
calling ipmi_init_msghandler_mod+0x0/0xc @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 1071 usecs
calling init_ipmi_devintf+0x0/0xf3 @ 1
ipmi device interface
initcall init_ipmi_devintf+0x0/0xf3 returned 0 after 1022 usecs
calling init_ipmi_si+0x0/0x4e6 @ 1
IPMI System Interface driver.ipmi_si: Adding default-specified kcs state machineipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0ipmi_si: Interface detection failed
Switched to clocksource tscipmi_si: Adding default-specified smic state machineipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0ipmi_si: Interface detection failedipmi_si: Adding default-specified bt state machineipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0ipmi_si: Interface detection failedipmi_si: Unable to find any System Interface(s)
initcall init_ipmi_si+0x0/0x4e6 returned -19 after 82793 usecs
calling ipmi_wdog_init+0x0/0x117 @ 1
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0x117 returned 0 after 5941 usecs
calling ipmi_poweroff_init+0x0/0x7f @ 1
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
initcall ipmi_poweroff_init+0x0/0x7f returned 0 after 12394 usecs
calling pnpbios_thread_init+0x0/0x6c @ 1
initcall pnpbios_thread_init+0x0/0x6c returned 0 after 31 usecs
calling isapnp_init+0x0/0x5de @ 1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
initcall isapnp_init+0x0/0x5de returned 0 after 359039 usecs
calling virtio_mmio_init+0x0/0x11 @ 1
initcall virtio_mmio_init+0x0/0x11 returned 0 after 23 usecs
calling virtio_pci_driver_init+0x0/0x16 @ 1
initcall virtio_pci_driver_init+0x0/0x16 returned 0 after 30 usecs
calling virtio_balloon_driver_init+0x0/0xf @ 1
initcall virtio_balloon_driver_init+0x0/0xf returned 0 after 21 usecs
calling regulator_virtual_consumer_driver_init+0x0/0x11 @ 1
initcall regulator_virtual_consumer_driver_init+0x0/0x11 returned 0 after 24 usecs
calling regulator_userspace_consumer_driver_init+0x0/0x11 @ 1
initcall regulator_userspace_consumer_driver_init+0x0/0x11 returned 0 after 23 usecs
calling pm800_regulator_driver_init+0x0/0x11 @ 1
initcall pm800_regulator_driver_init+0x0/0x11 returned 0 after 23 usecs
calling da9210_regulator_driver_init+0x0/0x11 @ 1
initcall da9210_regulator_driver_init+0x0/0x11 returned 0 after 22 usecs
calling lp3971_i2c_driver_init+0x0/0x11 @ 1
initcall lp3971_i2c_driver_init+0x0/0x11 returned 0 after 21 usecs
calling pfuze_driver_init+0x0/0x11 @ 1
initcall pfuze_driver_init+0x0/0x11 returned 0 after 29 usecs
calling wm8994_ldo_driver_init+0x0/0x11 @ 1
initcall wm8994_ldo_driver_init+0x0/0x11 returned 0 after 23 usecs
calling pty_init+0x0/0x357 @ 1
initcall pty_init+0x0/0x357 returned 0 after 34834 usecs
calling sysrq_init+0x0/0xb6 @ 1
initcall sysrq_init+0x0/0xb6 returned 0 after 20 usecs
calling gsm_init+0x0/0x141 @ 1
initcall gsm_init+0x0/0x141 returned 0 after 44 usecs
calling serial8250_init+0x0/0x15a @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
initcall serial8250_init+0x0/0x15a returned 0 after 42661 usecs
calling serial_pci_driver_init+0x0/0x16 @ 1
initcall serial_pci_driver_init+0x0/0x16 returned 0 after 77 usecs
calling dw8250_platform_driver_init+0x0/0x11 @ 1
initcall dw8250_platform_driver_init+0x0/0x11 returned 0 after 25 usecs
calling ulite_init+0x0/0x87 @ 1
initcall ulite_init+0x0/0x87 returned 0 after 53 usecs
calling altera_uart_init+0x0/0x35 @ 1
initcall altera_uart_init+0x0/0x35 returned 0 after 52 usecs
calling asc_init+0x0/0x43 @ 1
STMicroelectronics ASC driver initialized
initcall asc_init+0x0/0x43 returned 0 after 7345 usecs
calling init_kgdboc+0x0/0x15 @ 1
initcall init_kgdboc+0x0/0x15 returned 0 after 1 usecs
calling timbuart_platform_driver_init+0x0/0x11 @ 1
initcall timbuart_platform_driver_init+0x0/0x11 returned 0 after 24 usecs
calling altera_jtaguart_init+0x0/0x35 @ 1
initcall altera_jtaguart_init+0x0/0x35 returned 0 after 43 usecs
calling hsu_pci_init+0x0/0x2b1 @ 1
initcall hsu_pci_init+0x0/0x2b1 returned 0 after 210 usecs
calling pch_uart_module_init+0x0/0x3a @ 1
initcall pch_uart_module_init+0x0/0x3a returned 0 after 68 usecs
calling xuartps_init+0x0/0x35 @ 1
initcall xuartps_init+0x0/0x35 returned 0 after 45 usecs
calling rp2_uart_init+0x0/0x3a @ 1
initcall rp2_uart_init+0x0/0x3a returned 0 after 106 usecs
calling lpuart_serial_init+0x0/0x43 @ 1
serial: Freescale lpuart driver
initcall lpuart_serial_init+0x0/0x43 returned 0 after 5667 usecs
calling nozomi_init+0x0/0x100 @ 1
Initializing Nozomi driver 2.1d
initcall nozomi_init+0x0/0x100 returned 0 after 5696 usecs
calling rand_initialize+0x0/0x25 @ 1
initcall rand_initialize+0x0/0x25 returned 0 after 43 usecs
calling init+0x0/0xf3 @ 1
initcall init+0x0/0xf3 returned 0 after 77 usecs
calling raw_init+0x0/0x135 @ 1
initcall raw_init+0x0/0x135 returned 0 after 160 usecs
calling lp_init_module+0x0/0x210 @ 1
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x210 returned 0 after 6790 usecs
calling dtlk_init+0x0/0x1d1 @ 1
DoubleTalk PC - not found
initcall dtlk_init+0x0/0x1d1 returned -19 after 4597 usecs
calling applicom_init+0x0/0x484 @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x484 returned -6 after 27475 usecs
calling i8k_init+0x0/0x30d @ 1
initcall i8k_init+0x0/0x30d returned -19 after 0 usecs
calling timeriomem_rng_driver_init+0x0/0x11 @ 1
initcall timeriomem_rng_driver_init+0x0/0x11 returned 0 after 24 usecs
calling mod_init+0x0/0x1dc @ 1
initcall mod_init+0x0/0x1dc returned -19 after 111 usecs
calling mod_init+0x0/0x11a @ 1
initcall mod_init+0x0/0x11a returned -19 after 11 usecs
calling mod_init+0x0/0x9a @ 1
initcall mod_init+0x0/0x9a returned -19 after 8 usecs
calling mod_init+0x0/0x48 @ 1
initcall mod_init+0x0/0x48 returned -19 after 0 usecs
calling virtio_rng_driver_init+0x0/0xf @ 1
initcall virtio_rng_driver_init+0x0/0xf returned 0 after 21 usecs
calling rng_init+0x0/0xf @ 1
initcall rng_init+0x0/0xf returned 0 after 136 usecs
calling ppdev_init+0x0/0xba @ 1
ppdev: user-space parallel port driver
initcall ppdev_init+0x0/0xba returned 0 after 6789 usecs
calling pc8736x_gpio_init+0x0/0x2dd @ 1
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: no device found
initcall pc8736x_gpio_init+0x0/0x2dd returned -19 after 18607 usecs
calling nsc_gpio_init+0x0/0x14 @ 1nsc_gpio initializing
initcall nsc_gpio_init+0x0/0x14 returned 0 after 3910 usecs
calling tlclk_init+0x0/0x1d9 @ 1telclk_interrupt = 0xf non-mcpbl0010 hw.
initcall tlclk_init+0x0/0x1d9 returned -6 after 7128 usecs
calling mwave_init+0x0/0x1e5 @ 1smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
initcall mwave_init+0x0/0x1e5 returned -5 after 44250 usecs
calling agp_init+0x0/0x32 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x32 returned 0 after 5434 usecs
calling agp_ali_init+0x0/0x27 @ 1
initcall agp_ali_init+0x0/0x27 returned 0 after 37 usecs
calling agp_intel_init+0x0/0x27 @ 1
initcall agp_intel_init+0x0/0x27 returned 0 after 34 usecs
calling agp_nvidia_init+0x0/0x27 @ 1
initcall agp_nvidia_init+0x0/0x27 returned 0 after 36 usecs
calling agp_sis_init+0x0/0x27 @ 1
initcall agp_sis_init+0x0/0x27 returned 0 after 31 usecs
calling agp_serverworks_init+0x0/0x27 @ 1
initcall agp_serverworks_init+0x0/0x27 returned 0 after 29 usecs
calling agp_via_init+0x0/0x27 @ 1
initcall agp_via_init+0x0/0x27 returned 0 after 33 usecs
calling synclink_cs_init+0x0/0x103 @ 1
SyncLink PC Card driver $Revision: 4.34 $, tty major#242
initcall synclink_cs_init+0x0/0x103 returned 0 after 9837 usecs
calling cmm_init+0x0/0xa7 @ 1
initcall cmm_init+0x0/0xa7 returned 0 after 53 usecs
calling cm4040_init+0x0/0xa7 @ 1
initcall cm4040_init+0x0/0xa7 returned 0 after 55 usecs
calling hangcheck_init+0x0/0xab @ 1
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
initcall hangcheck_init+0x0/0xab returned 0 after 21193 usecs
calling init_tis+0x0/0x9d @ 1
initcall init_tis+0x0/0x9d returned 0 after 32 usecs
calling tpm_tis_i2c_driver_init+0x0/0x11 @ 1
initcall tpm_tis_i2c_driver_init+0x0/0x11 returned 0 after 35 usecs
calling init_nsc+0x0/0x570 @ 1
initcall init_nsc+0x0/0x570 returned -19 after 10 usecs
calling init_inf+0x0/0xf @ 1
initcall init_inf+0x0/0xf returned 0 after 23 usecs
calling i810fb_init+0x0/0x33e @ 1
initcall i810fb_init+0x0/0x33e returned 0 after 31 usecs
calling parport_default_proc_register+0x0/0x16 @ 1
initcall parport_default_proc_register+0x0/0x16 returned 0 after 24 usecs
calling parport_pc_init+0x0/0x336 @ 1
IT8712 SuperIO detected.parport_pc 00:0e: reported by Plug and Play BIOS
parport0: PC-style at 0x378parport0: PC-style at 0x378 (0x778) (0x778), irq 7, irq 7 [ [PCSPPPCSPP,TRISTATE,TRISTATE] ]
lp0: using parport0 (interrupt-driven).
initcall parport_pc_init+0x0/0x336 returned 0 after 110351 usecs
calling parport_serial_init+0x0/0x16 @ 1
initcall parport_serial_init+0x0/0x16 returned 0 after 35 usecs
calling parport_cs_driver_init+0x0/0xf @ 1
initcall parport_cs_driver_init+0x0/0xf returned 0 after 24 usecs
calling axdrv_init+0x0/0x11 @ 1
initcall axdrv_init+0x0/0x11 returned 0 after 25 usecs
calling topology_sysfs_init+0x0/0x19 @ 1
initcall topology_sysfs_init+0x0/0x19 returned 0 after 10 usecs
calling isa_bus_init+0x0/0x33 @ 1
initcall isa_bus_init+0x0/0x33 returned 0 after 43 usecs
calling floppy_init+0x0/0x13 @ 1
initcall floppy_init+0x0/0x13 returned 0 after 15 usecs
calling loop_init+0x0/0x129 @ 1
loop: module loaded
initcall loop_init+0x0/0x129 returned 0 after 5479 usecs
calling cpqarray_init+0x0/0x26d @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x26d returned -19 after 5496 usecs
calling cciss_init+0x0/0x9b @ 1
HP CISS Driver (v 3.6.26)
calling 1_floppy_async_init+0x0/0xa @ 6
Floppy drive(s):Floppy drive(s): fd0 is 1.44M fd0 is 1.44M
initcall cciss_init+0x0/0x9b returned 0 after 18234 usecs
calling pkt_init+0x0/0x169 @ 1
initcall pkt_init+0x0/0x169 returned 0 after 181 usecs
calling osdblk_init+0x0/0x7a @ 1
initcall osdblk_init+0x0/0x7a returned 0 after 27 usecs
calling mm_init+0x0/0x168 @ 1
MM: desc_per_page = 128
initcall mm_init+0x0/0x168 returned 0 after 4250 usecs
calling nbd_init+0x0/0x323 @ 1
nbd: registered device at major 43
initcall nbd_init+0x0/0x323 returned 0 after 10245 usecs
calling init+0x0/0x8b @ 1
initcall init+0x0/0x8b returned 0 after 39 usecs
calling carm_init+0x0/0x16 @ 1
initcall carm_init+0x0/0x16 returned 0 after 37 usecs
calling mtip_init+0x0/0x13e @ 1
mtip32xx Version 1.2.6os3
initcall mtip_init+0x0/0x13e returned 0 after 4670 usecs
calling ibmasm_init+0x0/0x69 @ 1
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0x69 returned 0 after 10344 usecs calling dummy_irq_init+0x0/0x75 @ 1
dummy-irq: no IRQ given. Use irq=N
initcall dummy_irq_init+0x0/0x75 returned -5 after 6280 usecs calling ics932s401_driver_init+0x0/0x11 @ 1
initcall ics932s401_driver_init+0x0/0x11 returned 0 after 28 usecs calling lkdtm_module_init+0x0/0x1b4 @ 1
lkdtm: No crash points registered, enable through debugfs initcall lkdtm_module_init+0x0/0x1b4 returned 0 after 10005 usecs calling tifm_7xx1_driver_init+0x0/0x16 @ 1
initcall tifm_7xx1_driver_init+0x0/0x16 returned 0 after 39 usecs calling phantom_init+0x0/0xed @ 1
Phantom Linux Driver, version n0.9.8, init OK
initcall phantom_init+0x0/0xed returned 0 after 7975 usecs calling bh1780_driver_init+0x0/0x11 @ 1
initcall bh1780_driver_init+0x0/0x11 returned 0 after 30 usecs calling apds990x_driver_init+0x0/0x11 @ 1
initcall apds990x_driver_init+0x0/0x11 returned 0 after 29 usecs calling ioc4_init+0x0/0x16 @ 1
initcall ioc4_init+0x0/0x16 returned 0 after 30 usecs
calling enclosure_init+0x0/0x14 @ 1
initcall enclosure_init+0x0/0x14 returned 0 after 22 usecs calling init_kgdbts+0x0/0x15 @ 1
initcall init_kgdbts+0x0/0x15 returned 0 after 0 usecs
calling cs5535_mfgpt_init+0x0/0x11 @ 1
initcall cs5535_mfgpt_init+0x0/0x11 returned 0 after 32 usecs calling ilo_init+0x0/0x82 @ 1
initcall ilo_init+0x0/0x82 returned 0 after 78 usecs
calling isl29020_driver_init+0x0/0x11 @ 1
initcall isl29020_driver_init+0x0/0x11 returned 0 after 30 usecs calling tsl2550_driver_init+0x0/0x11 @ 1
initcall tsl2550_driver_init+0x0/0x11 returned 0 after 22 usecs calling ds1682_driver_init+0x0/0x11 @ 1
initcall ds1682_driver_init+0x0/0x11 returned 0 after 21 usecs calling at24_init+0x0/0x43 @ 1
initcall at24_init+0x0/0x43 returned 0 after 22 usecs
calling eeprom_driver_init+0x0/0x11 @ 1
initcall eeprom_driver_init+0x0/0x11 returned 0 after 21 usecs calling cb710_init_module+0x0/0x16 @ 1
initcall cb710_init_module+0x0/0x16 returned 0 after 32 usecs calling kim_platform_driver_init+0x0/0x11 @ 1
initcall kim_platform_driver_init+0x0/0x11 returned 0 after 24 usecs calling fsa9480_i2c_driver_init+0x0/0x11 @ 1
initcall fsa9480_i2c_driver_init+0x0/0x11 returned 0 after 22 usecs calling vmci_drv_init+0x0/0xcf @ 1
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=60) Initialized host personality
initcall vmci_drv_init+0x0/0xcf returned 0 after 24080 usecs calling sm501_base_init+0x0/0x22 @ 1
initcall sm501_base_init+0x0/0x22 returned 0 after 58 usecs calling cros_ec_driver_init+0x0/0x11 @ 1
initcall cros_ec_driver_init+0x0/0x11 returned 0 after 23 usecs calling rtsx_pci_driver_init+0x0/0x16 @ 1
initcall rtsx_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling pasic3_driver_init+0x0/0x14 @ 1
initcall pasic3_driver_init+0x0/0x14 returned -19 after 44 usecs calling htcpld_core_init+0x0/0x24 @ 1
initcall htcpld_core_init+0x0/0x24 returned -19 after 63 usecs calling ti_tscadc_driver_init+0x0/0x11 @ 1
initcall ti_tscadc_driver_init+0x0/0x11 returned 0 after 24 usecs calling wm8994_i2c_driver_init+0x0/0x11 @ 1
initcall wm8994_i2c_driver_init+0x0/0x11 returned 0 after 57 usecs calling twl_driver_init+0x0/0x11 @ 1
initcall twl_driver_init+0x0/0x11 returned 0 after 41 usecs calling twl4030_madc_driver_init+0x0/0x11 @ 1
initcall twl4030_madc_driver_init+0x0/0x11 returned 0 after 34 usecs calling twl4030_audio_driver_init+0x0/0x11 @ 1
initcall twl4030_audio_driver_init+0x0/0x11 returned 0 after 24 usecs calling twl6040_driver_init+0x0/0x11 @ 1
initcall twl6040_driver_init+0x0/0x11 returned 0 after 22 usecs calling timberdale_pci_driver_init+0x0/0x16 @ 1
initcall timberdale_pci_driver_init+0x0/0x16 returned 0 after 30 usecs calling kempld_init+0x0/0x5f @ 1
initcall kempld_init+0x0/0x5f returned -19 after 0 usecs
calling lpc_sch_driver_init+0x0/0x16 @ 1
initcall lpc_sch_driver_init+0x0/0x16 returned 0 after 36 usecs calling lpc_ich_driver_init+0x0/0x16 @ 1
initcall lpc_ich_driver_init+0x0/0x16 returned 0 after 49 usecs calling rdc321x_sb_driver_init+0x0/0x16 @ 1
initcall rdc321x_sb_driver_init+0x0/0x16 returned 0 after 30 usecs calling cmodio_pci_driver_init+0x0/0x16 @ 1
initcall cmodio_pci_driver_init+0x0/0x16 returned 0 after 37 usecs calling vx855_pci_driver_init+0x0/0x16 @ 1
initcall vx855_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling si476x_core_driver_init+0x0/0x11 @ 1
initcall si476x_core_driver_init+0x0/0x11 returned 0 after 22 usecs calling cs5535_mfd_driver_init+0x0/0x16 @ 1
initcall cs5535_mfd_driver_init+0x0/0x16 returned 0 after 37 usecs calling vprbrd_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver viperboard
initcall vprbrd_driver_init+0x0/0x16 returned 0 after 8989 usecs calling nfcwilink_driver_init+0x0/0x11 @ 1
initcall nfcwilink_driver_init+0x0/0x11 returned 0 after 23 usecs calling scsi_tgt_init+0x0/0x9d @ 1
FDC 0 is a post-1991 82077
initcall scsi_tgt_init+0x0/0x9d returned 0 after 5476 usecs calling raid_init+0x0/0xf @ 1
initcall raid_init+0x0/0xf returned 0 after 23 usecs
calling spi_transport_init+0x0/0x79 @ 1
initcall spi_transport_init+0x0/0x79 returned 0 after 46 usecs calling fc_transport_init+0x0/0x71 @ 1
initcall fc_transport_init+0x0/0x71 returned 0 after 93 usecs calling iscsi_transport_init+0x0/0x199 @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x199 returned 0 after 7239 usecs calling sas_transport_init+0x0/0x9f @ 1
initcall sas_transport_init+0x0/0x9f returned 0 after 127 usecs calling sas_class_init+0x0/0x38 @ 1
initcall sas_class_init+0x0/0x38 returned 0 after 14 usecs calling srp_transport_init+0x0/0x33 @ 1
initcall srp_transport_init+0x0/0x33 returned 0 after 43 usecs calling scsi_dh_init+0x0/0x35 @ 1
initcall scsi_dh_init+0x0/0x35 returned 0 after 1 usecs
calling rdac_init+0x0/0x85 @ 1
rdac: device handler registered
initcall rdac_init+0x0/0x85 returned 0 after 5661 usecs
calling hp_sw_init+0x0/0xf @ 1hp_sw: device handler registered
initcall hp_sw_init+0x0/0xf returned 0 after 5773 usecs
calling clariion_init+0x0/0x32 @ 1
emc: device handler registered
initcall clariion_init+0x0/0x32 returned 0 after 5434 usecs calling alua_init+0x0/0x32 @ 1
alua: device handler registered
initcall alua_init+0x0/0x32 returned 0 after 5603 usecs
calling libfc_init+0x0/0x37 @ 1
initcall libfc_init+0x0/0x37 returned 0 after 152 usecs
calling libfcoe_init+0x0/0x23 @ 1
initcall libfcoe_init+0x0/0x23 returned 0 after 37 usecs
calling fnic_init_module+0x0/0x25d @ 1
fnic: Cisco FCoE HBA Driver, ver 1.5.0.23
fnic: Successfully Initialized Trace Buffer
initcall fnic_init_module+0x0/0x25d returned 0 after 15159 usecs calling bnx2fc_mod_init+0x0/0x255 @ 1
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.14 (Mar 08, 2013) initcall 1_floppy_async_init+0x0/0xa returned 0 after 1339307 usecs initcall bnx2fc_mod_init+0x0/0x255 returned 0 after 24511 usecs calling iscsi_sw_tcp_init+0x0/0x43 @ 1
iscsi: registered transport (tcp)
initcall iscsi_sw_tcp_init+0x0/0x43 returned 0 after 5942 usecs calling arcmsr_module_init+0x0/0x16 @ 1
initcall arcmsr_module_init+0x0/0x16 returned 0 after 35 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 389 usecs calling aha152x_init+0x0/0x615 @ 1
initcall aha152x_init+0x0/0x615 returned -19 after 67 usecs calling ahc_linux_init+0x0/0x5a @ 1
initcall ahc_linux_init+0x0/0x5a returned 0 after 52 usecs calling ahd_linux_init+0x0/0x6c @ 1
initcall ahd_linux_init+0x0/0x6c returned 0 after 55 usecs calling aac_init+0x0/0x76 @ 1
Adaptec aacraid driver 1.2-0[30200]-ms
initcall aac_init+0x0/0x76 returned 0 after 6836 usecs
calling aic94xx_init+0x0/0x12d @ 1
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded initcall aic94xx_init+0x0/0x12d returned 0 after 10762 usecs calling pm8001_init+0x0/0x9a @ 1
initcall pm8001_init+0x0/0x9a returned 0 after 58 usecs
calling ips_module_init+0x0/0x2f3 @ 1
initcall ips_module_init+0x0/0x2f3 returned -19 after 65 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1
scsi: <fdomain> Detection failed (no card)
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 7465 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 3 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 1 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1
NCR53c406a: no available ports found
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 6450 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1sym53c416.c: Version 1.0.0-ac
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 5277 usecs calling qla1280_init+0x0/0x16 @ 1
initcall qla1280_init+0x0/0x16 returned 0 after 30 usecs
calling qla2x00_module_init+0x0/0x242 @ 1
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k. initcall qla2x00_module_init+0x0/0x242 returned 0 after 13430 usecs calling tcm_qla2xxx_init+0x0/0x29d @ 1
initcall tcm_qla2xxx_init+0x0/0x29d returned 0 after 94 usecs calling qla4xxx_module_init+0x0/0xcc @ 1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
initcall qla4xxx_module_init+0x0/0xcc returned 0 after 10868 usecs calling lpfc_init+0x0/0xf0 @ 1
Emulex LightPulse Fibre Channel SCSI driver 8.3.42
Copyright(c) 2004-2013 Emulex. All rights reserved.
initcall lpfc_init+0x0/0xf0 returned 0 after 18119 usecs
calling bfad_init+0x0/0xab @ 1
Brocade BFA FC/FCOE SCSI driver - version: 3.2.21.1
initcall bfad_init+0x0/0xab returned 0 after 9048 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 2 usecs calling dmx3191d_init+0x0/0x16 @ 1
initcall dmx3191d_init+0x0/0x16 returned 0 after 38 usecs
calling hpsa_init+0x0/0x16 @ 1
initcall hpsa_init+0x0/0x16 returned 0 after 43 usecs
calling sym2_init+0x0/0xe0 @ 1
initcall sym2_init+0x0/0xe0 returned 0 after 39 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
Failed initialization of WD-7000 SCSI card!
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 28676 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 30939 usecs calling dc395x_module_init+0x0/0x16 @ 1
initcall dc395x_module_init+0x0/0x16 returned 0 after 31 usecs calling dc390_module_init+0x0/0x8f @ 1
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
initcall dc390_module_init+0x0/0x8f returned 0 after 22071 usecs calling megaraid_init+0x0/0xae @ 1
initcall megaraid_init+0x0/0xae returned 0 after 57 usecs
calling megasas_init+0x0/0x18e @ 1
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
initcall megasas_init+0x0/0x18e returned 0 after 9887 usecs calling _scsih_init+0x0/0x154 @ 1
mpt2sas version 16.100.00.00 loaded
initcall _scsih_init+0x0/0x154 returned 0 after 6401 usecs calling _scsih_init+0x0/0x154 @ 1
mpt3sas version 02.100.00.00 loaded
initcall _scsih_init+0x0/0x154 returned 0 after 6407 usecs calling ufshcd_pci_driver_init+0x0/0x16 @ 1
initcall ufshcd_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling ufshcd_pltfrm_driver_init+0x0/0x11 @ 1
initcall ufshcd_pltfrm_driver_init+0x0/0x11 returned 0 after 34 usecs calling gdth_init+0x0/0x7a5 @ 1
GDT-HA: Storage RAID Controller Driver. Version: 3.05
initcall gdth_init+0x0/0x7a5 returned 0 after 9365 usecs
calling initio_init_driver+0x0/0x16 @ 1
initcall initio_init_driver+0x0/0x16 returned 0 after 31 usecs calling inia100_init+0x0/0x16 @ 1
initcall inia100_init+0x0/0x16 returned 0 after 30 usecs
calling tw_init+0x0/0x2d @ 1
3ware Storage Controller device driver for Linux v1.26.02.003. initcall tw_init+0x0/0x2d returned 0 after 10888 usecs
calling twa_init+0x0/0x2d @ 1
3ware 9000 Storage Controller device driver for Linux v2.26.02.014. initcall twa_init+0x0/0x2d returned 0 after 11728 usecs
calling imm_driver_init+0x0/0x26 @ 1
imm: Version 2.05 (for Linux 2.4.0)
initcall imm_driver_init+0x0/0x26 returned 0 after 6646 usecs calling init_nsp32+0x0/0x3d @ 1
nsp32: loading...
initcall init_nsp32+0x0/0x3d returned 0 after 3265 usecs
calling ipr_init+0x0/0x3f @ 1
ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012) initcall ipr_init+0x0/0x3f returned 0 after 12748 usecs
calling hptiop_module_init+0x0/0x35 @ 1
RocketRAID 3xxx/4xxx Controller driver v1.8
initcall hptiop_module_init+0x0/0x35 returned 0 after 7669 usecs calling stex_init+0x0/0x2d @ 1
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
initcall stex_init+0x0/0x2d returned 0 after 9360 usecs
calling libcxgbi_init_module+0x0/0x17a @ 1
Clocksource tsc unstable (delta = 2830721179 ns) libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. initcall libcxgbi_init_module+0x0/0x17a returned 0 after 23559 usecs calling cxgb4i_init_module+0x0/0x40 @ 1
Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
iscsi: registered transport (cxgb4i)
initcall cxgb4i_init_module+0x0/0x40 returned 0 after 13588 usecs calling beiscsi_module_init+0x0/0x75 @ 1
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=b2bf7600
initcall beiscsi_module_init+0x0/0x75 returned 0 after 13100 usecs calling esas2r_init+0x0/0x287 @ 1
esas2r: driver will not be loaded because no ATTO esas2r devices were found initcall esas2r_init+0x0/0x287 returned -1 after 13052 usecs calling pmcraid_init+0x0/0x126 @ 1
initcall pmcraid_init+0x0/0x126 returned 0 after 87 usecs
calling init+0x0/0xc4 @ 1
initcall init+0x0/0xc4 returned 0 after 411 usecs
calling pvscsi_init+0x0/0x35 @ 1
VMware PVSCSI driver - version 1.0.2.0-k
initcall pvscsi_init+0x0/0x35 returned 0 after 7164 usecs
calling init_sd+0x0/0x14b @ 1
initcall init_sd+0x0/0x14b returned 0 after 83 usecs
calling init_sg+0x0/0xaf @ 1
initcall init_sg+0x0/0xaf returned 0 after 40 usecs
calling init_ch_module+0x0/0xab @ 1
SCSI Media Changer driver v0.25
initcall init_ch_module+0x0/0xab returned 0 after 5817 usecs calling osd_uld_init+0x0/0xbe @ 1
osd: LOADED open-osd 0.2.1
initcall osd_uld_init+0x0/0xbe returned 0 after 4758 usecs calling ahci_pci_driver_init+0x0/0x16 @ 1
initcall ahci_pci_driver_init+0x0/0x16 returned 0 after 54 usecs calling ahci_driver_init+0x0/0x11 @ 1
initcall ahci_driver_init+0x0/0x11 returned 0 after 27 usecs calling sil24_pci_driver_init+0x0/0x16 @ 1
initcall sil24_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling ahci_highbank_driver_init+0x0/0x11 @ 1
initcall ahci_highbank_driver_init+0x0/0x11 returned 0 after 39 usecs calling imx_ahci_driver_init+0x0/0x11 @ 1
initcall imx_ahci_driver_init+0x0/0x11 returned 0 after 24 usecs calling qs_ata_pci_driver_init+0x0/0x16 @ 1
initcall qs_ata_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling piix_init+0x0/0x24 @ 1
initcall piix_init+0x0/0x24 returned 0 after 40 usecs
calling mv_init+0x0/0x3c @ 1
initcall mv_init+0x0/0x3c returned 0 after 66 usecs
calling nv_pci_driver_init+0x0/0x16 @ 1sata_nv 0000:00:07.0: version 3.5sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 11 sata_nv 0000:00:08.0: setting latency timer to 64
calling 2_async_port_probe+0x0/0x49 @ 6
calling 3_async_port_probe+0x0/0x49 @ 91async_waiting @ 91
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 5
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 5 initcall nv_pci_driver_init+0x0/0x16 returned 0 after 97585 usecs calling pdc_ata_pci_driver_init+0x0/0x16 @ 1
initcall pdc_ata_pci_driver_init+0x0/0x16 returned 0 after 41 usecs calling sis_pci_driver_init+0x0/0x16 @ 1
initcall sis_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling k2_sata_pci_driver_init+0x0/0x16 @ 1
initcall k2_sata_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling uli_pci_driver_init+0x0/0x16 @ 1
initcall uli_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling svia_pci_driver_init+0x0/0x16 @ 1
initcall svia_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling vsc_sata_pci_driver_init+0x0/0x16 @ 1
initcall vsc_sata_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling ali_init+0x0/0x40 @ 1
initcall ali_init+0x0/0x40 returned 0 after 36 usecs
calling amd_pci_driver_init+0x0/0x16 @ 1pata_amd 0000:00:06.0: version 0.4.1pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 initcall amd_pci_driver_init+0x0/0x16 returned 0 after 44162 usecs calling atp867x_driver_init+0x0/0x16 @ 1
initcall atp867x_driver_init+0x0/0x16 returned 0 after 40 usecs calling cmd64x_pci_driver_init+0x0/0x16 @ 1
initcall cmd64x_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling cs5535_pci_driver_init+0x0/0x16 @ 1
initcall cs5535_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling cs5536_pci_driver_init+0x0/0x16 @ 1
initcall cs5536_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling efar_pci_driver_init+0x0/0x16 @ 1
initcall efar_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling hpt36x_pci_driver_init+0x0/0x16 @ 1
initcall hpt36x_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling hpt37x_pci_driver_init+0x0/0x16 @ 1
initcall hpt37x_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling hpt3x2n_pci_driver_init+0x0/0x16 @ 1
initcall hpt3x2n_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling it821x_pci_driver_init+0x0/0x16 @ 1
initcall it821x_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling jmicron_pci_driver_init+0x0/0x16 @ 1
initcall jmicron_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling marvell_pci_driver_init+0x0/0x16 @ 1
initcall marvell_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling ninja32_pci_driver_init+0x0/0x16 @ 1
initcall ninja32_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling oldpiix_pci_driver_init+0x0/0x16 @ 1
initcall oldpiix_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling optidma_pci_driver_init+0x0/0x16 @ 1
initcall optidma_pci_driver_init+0x0/0x16 returned 0 after 40 usecs calling pdc2027x_pci_driver_init+0x0/0x16 @ 1
initcall pdc2027x_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling pdc202xx_pci_driver_init+0x0/0x16 @ 1
initcall pdc202xx_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling radisys_pci_driver_init+0x0/0x16 @ 1
initcall radisys_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling rdc_pci_driver_init+0x0/0x16 @ 1
initcall rdc_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling sc1200_pci_driver_init+0x0/0x16 @ 1
initcall sc1200_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling sch_pci_driver_init+0x0/0x16 @ 1
initcall sch_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling serverworks_pci_driver_init+0x0/0x16 @ 1
initcall serverworks_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling sis_pci_driver_init+0x0/0x16 @ 1
initcall sis_pci_driver_init+0x0/0x16 returned 0 after 40 usecs calling ata_tosh_pci_driver_init+0x0/0x16 @ 1
initcall ata_tosh_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling triflex_pci_driver_init+0x0/0x16 @ 1
initcall triflex_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling via_pci_driver_init+0x0/0x16 @ 1
initcall via_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling cmd640_pci_driver_init+0x0/0x16 @ 1
initcall cmd640_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling isapnp_init+0x0/0xf @ 1
initcall isapnp_init+0x0/0xf returned 0 after 29 usecs
calling mpiix_pci_driver_init+0x0/0x16 @ 1
initcall mpiix_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling ns87410_pci_driver_init+0x0/0x16 @ 1
initcall ns87410_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling opti_pci_driver_init+0x0/0x16 @ 1
initcall opti_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling pata_platform_driver_init+0x0/0x11 @ 1
initcall pata_platform_driver_init+0x0/0x11 returned 0 after 34 usecs calling pata_of_platform_driver_init+0x0/0x11 @ 1
initcall pata_of_platform_driver_init+0x0/0x11 returned 0 after 25 usecs calling rz1000_pci_driver_init+0x0/0x16 @ 1
initcall rz1000_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling ata_generic_pci_driver_init+0x0/0x16 @ 1
initcall ata_generic_pci_driver_init+0x0/0x16 returned 0 after 34 usecs calling legacy_init+0x0/0x874 @ 1
initcall legacy_init+0x0/0x874 returned -19 after 14 usecs
calling target_core_init_configfs+0x0/0x394 @ 1 calling 4_async_port_probe+0x0/0x49 @ 93 calling 5_async_port_probe+0x0/0x49 @ 109
async_waiting @ 109
calling 6_async_port_probe+0x0/0x49 @ 112
calling 7_async_port_probe+0x0/0x49 @ 113async_waiting @ 113
Switched to clocksource pit
Rounding down aligned max_sectors from 4294967295 to 4294967288
initcall target_core_init_configfs+0x0/0x394 returned 0 after 39537 usecs
calling iblock_module_init+0x0/0xf @ 1
initcall iblock_module_init+0x0/0xf returned 0 after 4 usecs
calling fileio_module_init+0x0/0xf @ 1
initcall fileio_module_init+0x0/0xf returned 0 after 4 usecs
calling tcm_loop_fabric_init+0x0/0x38f @ 1
initcall tcm_loop_fabric_init+0x0/0x38f returned 0 after 132 usecs
calling iscsi_target_init_module+0x0/0x21e @ 1
initcall iscsi_target_init_module+0x0/0x21e returned 0 after 2380 usecs
calling hsc_init+0x0/0x66 @ 1
HSI/SSI char device loaded
initcall hsc_init+0x0/0x66 returned 0 after 1828 usecs
calling bonding_init+0x0/0x97 @ 1
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
initcall bonding_init+0x0/0x97 returned 0 after 1577 usecs
calling eql_init_module+0x0/0x6a @ 1
eql: Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected])
initcall eql_init_module+0x0/0x6a returned 0 after 1500 usecs
calling macvlan_init_module+0x0/0x31 @ 1
initcall macvlan_init_module+0x0/0x31 returned 0 after 4 usecs
calling macvtap_init+0x0/0xc7 @ 1
initcall macvtap_init+0x0/0xc7 returned 0 after 33 usecs
calling net_olddevs_init+0x0/0x50 @ 1
LocalTalk card not found; 220 = ff, 240 = ff.
initcall net_olddevs_init+0x0/0x50 returned 0 after 1451 usecs
calling cicada_init+0x0/0x14 @ 1
initcall cicada_init+0x0/0x14 returned 0 after 49 usecs
calling qs6612_init+0x0/0xf @ 1
initcall qs6612_init+0x0/0xf returned 0 after 24 usecs
calling smsc_init+0x0/0x14 @ 1
initcall smsc_init+0x0/0x14 returned 0 after 119 usecs
calling broadcom_init+0x0/0x14 @ 1
initcall broadcom_init+0x0/0x14 returned 0 after 253 usecs
calling bcm87xx_init+0x0/0x14 @ 1
initcall bcm87xx_init+0x0/0x14 returned 0 after 46 usecs
calling icplus_init+0x0/0x14 @ 1
initcall icplus_init+0x0/0x14 returned 0 after 152 usecs
calling et1011c_init+0x0/0xf @ 1
initcall et1011c_init+0x0/0xf returned 0 after 23 usecs
calling ns_init+0x0/0xf @ 1
initcall ns_init+0x0/0xf returned 0 after 24 usecs
calling ste10Xp_init+0x0/0x14 @ 1
initcall ste10Xp_init+0x0/0x14 returned 0 after 53 usecs
calling ksphy_init+0x0/0x14 @ 1
initcall ksphy_init+0x0/0x14 returned 0 after 261 usecs
calling atheros_init+0x0/0x14 @ 1
initcall atheros_init+0x0/0x14 returned 0 after 72 usecs
calling mdio_mux_gpio_driver_init+0x0/0x11 @ 1
initcall mdio_mux_gpio_driver_init+0x0/0x11 returned 0 after 40 usecs
calling mdio_mux_mmioreg_driver_init+0x0/0x11 @ 1
initcall mdio_mux_mmioreg_driver_init+0x0/0x11 returned 0 after 29 usecs
calling team_module_init+0x0/0x80 @ 1
initcall team_module_init+0x0/0x80 returned 0 after 54 usecs
calling bc_init_module+0x0/0xf @ 1
initcall bc_init_module+0x0/0xf returned 0 after 22 usecs
calling rr_init_module+0x0/0xf @ 1
initcall rr_init_module+0x0/0xf returned 0 after 4 usecs
calling rnd_init_module+0x0/0xf @ 1
initcall rnd_init_module+0x0/0xf returned 0 after 4 usecs
calling ab_init_module+0x0/0xf @ 1
initcall ab_init_module+0x0/0xf returned 0 after 4 usecs
calling lb_init_module+0x0/0xf @ 1
initcall lb_init_module+0x0/0xf returned 0 after 4 usecs
calling virtio_net_driver_init+0x0/0xf @ 1
initcall virtio_net_driver_init+0x0/0xf returned 0 after 27 usecs
calling nlmon_register+0x0/0xf @ 1
initcall nlmon_register+0x0/0xf returned 0 after 4 usecs
calling ipddp_init_module+0x0/0xed @ 1
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <[email protected]>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <[email protected]>
initcall ipddp_init_module+0x0/0xed returned 0 after 3465 usecs
calling can_dev_init+0x0/0x2c @ 1
CAN device driver interface
initcall can_dev_init+0x0/0x2c returned 0 after 1019 usecs
calling esd_usb2_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver esd_usb2
initcall esd_usb2_driver_init+0x0/0x16 returned 0 after 839 usecs
calling kvaser_usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver kvaser_usb
initcall kvaser_usb_driver_init+0x0/0x16 returned 0 after 1178 usecs
calling usb_8dev_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usb_8dev
initcall usb_8dev_driver_init+0x0/0x16 returned 0 after 1813 usecs
calling softing_driver_init+0x0/0x11 @ 1
initcall softing_driver_init+0x0/0x11 returned 0 after 29 usecs
calling sja1000_init+0x0/0x1e @ 1
sja1000 CAN netdevice driver
initcall sja1000_init+0x0/0x1e returned 0 after 1189 usecs
calling sja1000_isa_init+0x0/0x14f @ 1sja1000_isa: insufficient parameters supplied
initcall sja1000_isa_init+0x0/0x14f returned -22 after 1137 usecs
calling sp_driver_init+0x0/0x11 @ 1
initcall sp_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ems_pcmcia_driver_init+0x0/0xf @ 1
initcall ems_pcmcia_driver_init+0x0/0xf returned 0 after 36 usecs
calling ems_pci_driver_init+0x0/0x16 @ 1
initcall ems_pci_driver_init+0x0/0x16 returned 0 after 53 usecs
calling pcan_driver_init+0x0/0xf @ 1
initcall pcan_driver_init+0x0/0xf returned 0 after 26 usecs
calling peak_pci_driver_init+0x0/0x16 @ 1
initcall peak_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling plx_pci_driver_init+0x0/0x16 @ 1
initcall plx_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling tscan1_init+0x0/0x14 @ 1
initcall tscan1_init+0x0/0x14 returned 0 after 263 usecs
calling cc770_init+0x0/0x2b @ 1
cc770: CAN netdevice driver
initcall cc770_init+0x0/0x2b returned 0 after 1033 usecs
calling cc770_isa_init+0x0/0x130 @ 1cc770_isa: insufficient parameters supplied
initcall cc770_isa_init+0x0/0x130 returned -22 after 798 usecs
calling cc770_platform_driver_init+0x0/0x11 @ 1
initcall cc770_platform_driver_init+0x0/0x11 returned 0 after 45 usecs
calling pch_can_pci_driver_init+0x0/0x16 @ 1
initcall pch_can_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling grcan_driver_init+0x0/0x11 @ 1
initcall grcan_driver_init+0x0/0x11 returned 0 after 29 usecs
calling tc589_driver_init+0x0/0xf @ 1
initcall tc589_driver_init+0x0/0xf returned 0 after 27 usecs
calling vortex_init+0x0/0x9f @ 1
initcall vortex_init+0x0/0x9f returned 0 after 54 usecs
calling typhoon_init+0x0/0x16 @ 1
initcall typhoon_init+0x0/0x16 returned 0 after 36 usecs
calling ne_init+0x0/0x21 @ 1
initcall ne_init+0x0/0x21 returned -19 after 361 usecs
calling NS8390p_init_module+0x0/0x7 @ 1
initcall NS8390p_init_module+0x0/0x7 returned 0 after 4 usecs
calling ne2k_pci_init+0x0/0x16 @ 1
initcall ne2k_pci_init+0x0/0x16 returned 0 after 37 usecs
calling axnet_cs_driver_init+0x0/0xf @ 1
initcall axnet_cs_driver_init+0x0/0xf returned 0 after 31 usecs
calling pcnet_driver_init+0x0/0xf @ 1
initcall pcnet_driver_init+0x0/0xf returned 0 after 61 usecs
calling amd8111e_driver_init+0x0/0x16 @ 1
initcall amd8111e_driver_init+0x0/0x16 returned 0 after 36 usecs
calling nmclan_cs_driver_init+0x0/0xf @ 1
initcall nmclan_cs_driver_init+0x0/0xf returned 0 after 27 usecs
calling pcnet32_init_module+0x0/0x114 @ 1
pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
initcall pcnet32_init_module+0x0/0x114 returned 0 after 1118 usecs
calling b44_init+0x0/0x3f @ 1
initcall b44_init+0x0/0x3f returned 0 after 57 usecs
calling bnx2_pci_driver_init+0x0/0x16 @ 1
initcall bnx2_pci_driver_init+0x0/0x16 returned 0 after 37 usecs
calling cnic_init+0x0/0x8b @ 1
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
initcall cnic_init+0x0/0x8b returned 0 after 1371 usecs
calling tg3_driver_init+0x0/0x16 @ 1
initcall tg3_driver_init+0x0/0x16 returned 0 after 54 usecs
calling cxgb_pci_driver_init+0x0/0x16 @ 1
initcall cxgb_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling cxgb4_init_module+0x0/0xa9 @ 1
initcall cxgb4_init_module+0x0/0xa9 returned 0 after 136 usecs
calling dnet_driver_init+0x0/0x11 @ 1
initcall dnet_driver_init+0x0/0x11 returned 0 after 31 usecs
calling dmfe_init_module+0x0/0xea @ 1
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
initcall dmfe_init_module+0x0/0xea returned 0 after 1758 usecs
calling w840_init+0x0/0x23 @ 1
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
initcall w840_init+0x0/0x23 returned 0 after 1263 usecs
calling de_init+0x0/0x16 @ 1
initcall de_init+0x0/0x16 returned 0 after 36 usecs
calling tulip_init+0x0/0x2a @ 1
initcall tulip_init+0x0/0x2a returned 0 after 45 usecs
calling de4x5_module_init+0x0/0x16 @ 1
initcall de4x5_module_init+0x0/0x16 returned 0 after 36 usecs
calling uli526x_init_module+0x0/0x9e @ 1
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
initcall uli526x_init_module+0x0/0x9e returned 0 after 1119 usecs
calling s2io_starter+0x0/0x16 @ 1
initcall s2io_starter+0x0/0x16 returned 0 after 36 usecs
calling jme_init_module+0x0/0x2d @ 1
jme: JMicron JMC2XX ethernet driver version 1.0.8
initcall jme_init_module+0x0/0x2d returned 0 after 870 usecs
calling mlx4_init+0x0/0x12e @ 1
initcall mlx4_init+0x0/0x12e returned 0 after 99 usecs
calling mlx4_en_init+0x0/0xf @ 1
initcall mlx4_en_init+0x0/0xf returned 0 after 16 usecs
calling init+0x0/0x5d @ 1
initcall init+0x0/0x5d returned 0 after 83 usecs
calling ks8851_platform_driver_init+0x0/0x11 @ 1
initcall ks8851_platform_driver_init+0x0/0x11 returned 0 after 36 usecs
calling pci_device_driver_init+0x0/0x16 @ 1
initcall pci_device_driver_init+0x0/0x16 returned 0 after 38 usecs
calling fealnx_init+0x0/0x16 @ 1
initcall fealnx_init+0x0/0x16 returned 0 after 36 usecs
calling natsemi_init_mod+0x0/0x16 @ 1
initcall natsemi_init_mod+0x0/0x16 returned 0 after 36 usecs
calling forcedeth_pci_driver_init+0x0/0x16 @ 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
forcedeth 0000:00:0a.0: setting latency timer to 64
ata5.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata5.00: 488397168 sectors, multi 1: LBA48
ata5: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
ata5.00: configured for UDMA/100async_waiting @ 112
ata1: SATA link down (SStatus 0 SControl 300)async_waiting @ 6async_continuing @ 6 after 4 usec
initcall 2_async_port_probe+0x0/0x49 returned 0 after 1220598 usecsasync_continuing @ 91 after 1210867 usec
ata3: SATA link down (SStatus 0 SControl 300)async_waiting @ 93
ata2: SATA link down (SStatus 0 SControl 300)async_waiting @ 91async_continuing @ 91 after 4 usec
initcall 3_async_port_probe+0x0/0x49 returned 0 after 1514369 usecsasync_continuing @ 93 after 268746 usec
initcall 4_async_port_probe+0x0/0x49 returned 0 after 591892 usecsasync_continuing @ 109 after 581639 usec
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
initcall forcedeth_pci_driver_init+0x0/0x16 returned 0 after 514388 usecs
calling ethoc_driver_init+0x0/0x11 @ 1
initcall ethoc_driver_init+0x0/0x11 returned 0 after 42 usecs
calling yellowfin_init+0x0/0x16 @ 1
initcall yellowfin_init+0x0/0x16 returned 0 after 45 usecs
calling sh_eth_driver_init+0x0/0x11 @ 1
initcall sh_eth_driver_init+0x0/0x11 returned 0 after 30 usecs
calling epic_init+0x0/0x16 @ 1
initcall epic_init+0x0/0x16 returned 0 after 44 usecs
calling smsc9420_init_module+0x0/0x36 @ 1
initcall smsc9420_init_module+0x0/0x36 returned 0 after 36 usecs
calling gem_driver_init+0x0/0x16 @ 1
initcall gem_driver_init+0x0/0x16 returned 0 after 36 usecs
calling cas_init+0x0/0x36 @ 1
initcall cas_init+0x0/0x36 returned 0 after 37 usecs
calling niu_init+0x0/0x36 @ 1
initcall niu_init+0x0/0x36 returned 0 after 45 usecs
calling velocity_init_module+0x0/0x48 @ 1
initcall velocity_init_module+0x0/0x48 returned 0 after 62 usecs
calling xirc2ps_cs_driver_init+0x0/0xf @ 1
initcall xirc2ps_cs_driver_init+0x0/0xf returned 0 after 39 usecs
calling skfddi_pci_driver_init+0x0/0x16 @ 1
initcall skfddi_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling dmascc_init+0x0/0x89c @ 1
dmascc: autoprobing (dangerous)
dmascc: no adapters found
initcall dmascc_init+0x0/0x89c returned -5 after 52931 usecs
calling scc_init_driver+0x0/0xa5 @ 1
AX.25: Z8530 SCC driver version 3.0.dl1bke
initcall scc_init_driver+0x0/0xa5 returned 0 after 1870 usecs
calling mkiss_init_driver+0x0/0x3f @ 1
mkiss: AX.25 Multikiss, Hans Albas PE1AYX
initcall mkiss_init_driver+0x0/0x3f returned 0 after 461 usecs
calling sixpack_init_driver+0x0/0x3f @ 1
AX.25: 6pack driver, Revision: 0.3.0
initcall sixpack_init_driver+0x0/0x3f returned 0 after 1567 usecs
calling yam_init_driver+0x0/0x120 @ 1
YAM driver version 0.8 by F1OAT/F6FBB
initcall yam_init_driver+0x0/0x120 returned 0 after 1737 usecs
calling bpq_init_driver+0x0/0x65 @ 1
AX.25: bpqether driver version 004
initcall bpq_init_driver+0x0/0x65 returned 0 after 252 usecs
calling init_baycomserfdx+0x0/0x100 @ 1baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_ser_fdx: version 0.10baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_ser_fdx: version 0.10
initcall init_baycomserfdx+0x0/0x100 returned 0 after 2460 usecs
calling hdlcdrv_init_driver+0x0/0x20 @ 1
hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
hdlcdrv: version 0.8
initcall hdlcdrv_init_driver+0x0/0x20 returned 0 after 1618 usecs
calling init_baycomserhdx+0x0/0xf3 @ 1baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_ser_hdx: version 0.10baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_ser_hdx: version 0.10
initcall init_baycomserhdx+0x0/0xf3 returned 0 after 1408 usecs
calling init_baycompar+0x0/0xe5 @ 1baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_par: version 0.9baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_par: version 0.9
initcall init_baycompar+0x0/0xe5 returned 0 after 2824 usecs
calling init_baycomepp+0x0/0x111 @ 1baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_epp: version 0.7baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WAbaycom_epp: version 0.7
initcall init_baycomepp+0x0/0x111 returned 0 after 1838 usecs
calling nsc_ircc_init+0x0/0x1d8 @ 1
initcall nsc_ircc_init+0x0/0x1d8 returned -19 after 135 usecs
calling donauboe_init+0x0/0x16 @ 1
initcall donauboe_init+0x0/0x16 returned 0 after 52 usecs
calling smsc_ircc_init+0x0/0x4f9 @ 1
initcall smsc_ircc_init+0x0/0x4f9 returned -19 after 162 usecs
calling vlsi_mod_init+0x0/0x110 @ 1
initcall vlsi_mod_init+0x0/0x110 returned 0 after 53 usecs
calling via_ircc_init+0x0/0x1c @ 1
initcall via_ircc_init+0x0/0x1c returned 0 after 37 usecs
calling mcs_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver mcs7780
initcall mcs_driver_init+0x0/0x16 returned 0 after 671 usecs
calling irtty_sir_init+0x0/0x3c @ 1
initcall irtty_sir_init+0x0/0x3c returned 0 after 4 usecs
calling sir_wq_init+0x0/0x49 @ 1
initcall sir_wq_init+0x0/0x49 returned 0 after 94 usecs
calling irda_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver kingsun-sir
initcall irda_driver_init+0x0/0x16 returned 0 after 371 usecs
calling slip_init+0x0/0xa8 @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
initcall slip_init+0x0/0xa8 returned 0 after 2324 usecs
calling init_x25_asy+0x0/0x6c @ 1x25_asy: X.25 async: version 0.00 ALPHA (dynamic channels, max=256)
initcall init_x25_asy+0x0/0x6c returned 0 after 964 usecs
calling lapbeth_init_driver+0x0/0x28 @ 1
LAPB Ethernet driver version 0.02
initcall lapbeth_init_driver+0x0/0x28 returned 0 after 1059 usecs
calling ipw2100_init+0x0/0x78 @ 1
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
initcall ipw2100_init+0x0/0x78 returned 0 after 2832 usecs
calling ipw_init+0x0/0x73 @ 1
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
initcall ipw_init+0x0/0x73 returned 0 after 1661 usecs
calling libipw_init+0x0/0x20 @ 1
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
initcall libipw_init+0x0/0x20 returned 0 after 1573 usecs
calling init_orinoco+0x0/0x1e @ 1
orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
initcall init_orinoco+0x0/0x1e returned 0 after 981 usecs
calling orinoco_driver_init+0x0/0xf @ 1
initcall orinoco_driver_init+0x0/0xf returned 0 after 41 usecs
calling orinoco_plx_init+0x0/0x2d @ 1orinoco_plx 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]>, Daniel Barlow <[email protected]>) initcall orinoco_plx_init+0x0/0x2d returned 0 after 1052 usecs
calling orinoco_driver_init+0x0/0xf @ 1
initcall orinoco_driver_init+0x0/0xf returned 0 after 27 usecs
calling airo_driver_init+0x0/0xf @ 1
initcall airo_driver_init+0x0/0xf returned 0 after 26 usecs
calling airo_init_module+0x0/0x113 @ 1airo(): Probing for PCI adaptersairo(): Finished probing for PCI adapters
initcall airo_init_module+0x0/0x113 returned 0 after 2328 usecs
calling prism54_module_init+0x0/0x35 @ 1
Loaded prism54 driver, version 1.2
initcall prism54_module_init+0x0/0x35 returned 0 after 1268 usecs
calling hostap_init+0x0/0x40 @ 1
initcall hostap_init+0x0/0x40 returned 0 after 15 usecs
calling hostap_driver_init+0x0/0xf @ 1
initcall hostap_driver_init+0x0/0xf returned 0 after 32 usecs
calling prism2_pci_driver_init+0x0/0x16 @ 1
initcall prism2_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling usb_init+0x0/0xf3 @ 1
zd1211rw usb_init()
usbcore: registered new interface driver zd1211rw
zd1211rw initialized
initcall usb_init+0x0/0xf3 returned 0 after 2291 usecs
calling rtl8180_driver_init+0x0/0x16 @ 1
initcall rtl8180_driver_init+0x0/0x16 returned 0 after 37 usecs
calling rtl_core_module_init+0x0/0x45 @ 1
initcall rtl_core_module_init+0x0/0x45 returned 0 after 18 usecs
calling rtl8192cu_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rtl8192cu
initcall rtl8192cu_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling rtl92se_driver_init+0x0/0x16 @ 1
initcall rtl92se_driver_init+0x0/0x16 returned 0 after 45 usecs
calling rtl8723ae_driver_init+0x0/0x16 @ 1
initcall rtl8723ae_driver_init+0x0/0x16 returned 0 after 36 usecs
calling rtl88ee_driver_init+0x0/0x16 @ 1
initcall rtl88ee_driver_init+0x0/0x16 returned 0 after 43 usecs
calling wl3501_driver_init+0x0/0xf @ 1
initcall wl3501_driver_init+0x0/0xf returned 0 after 28 usecs
calling lbtf_init_module+0x0/0xde @ 1
initcall lbtf_init_module+0x0/0xde returned 0 after 58 usecs
calling adm8211_driver_init+0x0/0x16 @ 1
initcall adm8211_driver_init+0x0/0x16 returned 0 after 84 usecs
calling mwl8k_driver_init+0x0/0x16 @ 1
initcall mwl8k_driver_init+0x0/0x16 returned 0 after 51 usecs
calling iwl_drv_init+0x0/0x7b @ 1
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
initcall iwl_drv_init+0x0/0x7b returned 0 after 2177 usecs
calling iwl_init+0x0/0x55 @ 1
initcall iwl_init+0x0/0x55 returned 0 after 20 usecs
calling iwl_mvm_init+0x0/0x55 @ 1
initcall iwl_mvm_init+0x0/0x55 returned 0 after 4 usecs
calling il4965_init+0x0/0x6b @ 1
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
initcall il4965_init+0x0/0x6b returned 0 after 2136 usecs
calling il3945_init+0x0/0x6b @ 1
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
initcall il3945_init+0x0/0x6b returned 0 after 2468 usecs
calling rt2500pci_driver_init+0x0/0x16 @ 1
initcall rt2500pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling rt61pci_driver_init+0x0/0x16 @ 1
initcall rt61pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling rt2800pci_init+0x0/0x16 @ 1
initcall rt2800pci_init+0x0/0x16 returned 0 after 39 usecs
calling rt2800usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rt2800usb
initcall rt2800usb_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling ath5k_pci_driver_init+0x0/0x16 @ 1
initcall ath5k_pci_driver_init+0x0/0x16 returned 0 after 44 usecs
calling ath9k_init+0x0/0x39 @ 1
initcall ath9k_init+0x0/0x39 returned 0 after 72 usecs
calling ath9k_init+0x0/0x7 @ 1
initcall ath9k_init+0x0/0x7 returned 0 after 4 usecs
calling ath9k_cmn_init+0x0/0x7 @ 1
initcall ath9k_cmn_init+0x0/0x7 returned 0 after 4 usecs
calling ath9k_htc_init+0x0/0x24 @ 1
usbcore: registered new interface driver ath9k_htc
initcall ath9k_htc_init+0x0/0x24 returned 0 after 1009 usecs
calling carl9170_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver carl9170
initcall carl9170_driver_init+0x0/0x16 returned 0 after 1816 usecs
calling ath6kl_sdio_init+0x0/0x2e @ 1
initcall ath6kl_sdio_init+0x0/0x2e returned 0 after 24 usecs
calling ath6kl_usb_init+0x0/0x36 @ 1
usbcore: registered new interface driver ath6kl_usb
initcall ath6kl_usb_init+0x0/0x36 returned 0 after 1178 usecs
calling wil6210_driver_init+0x0/0x16 @ 1
initcall wil6210_driver_init+0x0/0x16 returned 0 after 43 usecs
calling wl12xx_driver_init+0x0/0x11 @ 1
initcall wl12xx_driver_init+0x0/0x11 returned 0 after 29 usecs
calling brcmfmac_module_init+0x0/0x26 @ 1
initcall brcmfmac_module_init+0x0/0x26 returned 0 after 49 usecs
calling cw1200_sdio_init+0x0/0x105 @ 1
initcall cw1200_sdio_init+0x0/0x105 returned 0 after 23 usecs
calling vmxnet3_init_module+0x0/0x35 @ 1
VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI
initcall vmxnet3_init_module+0x0/0x35 returned 0 after 1420 usecs
calling catc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver catc
initcall catc_driver_init+0x0/0x16 returned 0 after 1138 usecs
calling pegasus_init+0x0/0x13e @ 1
pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x13e returned 0 after 1795 usecs
calling rtl8150_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rtl8150
initcall rtl8150_driver_init+0x0/0x16 returned 0 after 670 usecs
calling rtl8152_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver r8152
initcall rtl8152_driver_init+0x0/0x16 returned 0 after 1307 usecs
calling asix_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver asix
initcall asix_driver_init+0x0/0x16 returned 0 after 1139 usecs
calling ax88179_178a_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ax88179_178a
initcall ax88179_178a_driver_init+0x0/0x16 returned 0 after 540 usecs
calling cdc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling r815x_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver r815x
initcall r815x_driver_init+0x0/0x16 returned 0 after 330 usecs
calling eem_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_eem
initcall eem_driver_init+0x0/0x16 returned 0 after 671 usecs
calling dm9601_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver dm9601
initcall dm9601_driver_init+0x0/0x16 returned 0 after 501 usecs
calling smsc75xx_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver smsc75xx
initcall smsc75xx_driver_init+0x0/0x16 returned 0 after 1816 usecs
calling smsc95xx_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver smsc95xx
initcall smsc95xx_driver_init+0x0/0x16 returned 0 after 839 usecs
calling gl620a_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver gl620a
initcall gl620a_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling net1080_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver net1080
initcall net1080_driver_init+0x0/0x16 returned 0 after 671 usecs
calling rndis_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rndis_host
initcall rndis_driver_init+0x0/0x16 returned 0 after 201 usecs
calling cdc_subset_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_subset
initcall cdc_subset_driver_init+0x0/0x16 returned 0 after 1178 usecs
calling zaurus_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver zaurus
initcall zaurus_driver_init+0x0/0x16 returned 0 after 500 usecs
calling usbnet_init+0x0/0x26 @ 1
initcall usbnet_init+0x0/0x26 returned 0 after 11 usecs
calling int51x1_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver int51x1
initcall int51x1_driver_init+0x0/0x16 returned 0 after 1646 usecs
calling kalmia_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver kalmia
initcall kalmia_driver_init+0x0/0x16 returned 0 after 500 usecs
calling ipheth_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ipheth
initcall ipheth_driver_init+0x0/0x16 returned 0 after 500 usecs
calling cx82310_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cx82310_eth
initcall cx82310_driver_init+0x0/0x16 returned 0 after 1347 usecs
calling cdc_ncm_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_ncm
initcall cdc_ncm_driver_init+0x0/0x16 returned 0 after 670 usecs
calling qmi_wwan_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver qmi_wwan
initcall qmi_wwan_driver_init+0x0/0x16 returned 0 after 840 usecs
calling cdc_mbim_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_mbim
initcall cdc_mbim_driver_init+0x0/0x16 returned 0 after 838 usecs
calling zatm_init_module+0x0/0x16 @ 1
initcall zatm_init_module+0x0/0x16 returned 0 after 51 usecs
calling uPD98402_module_init+0x0/0x7 @ 1
initcall uPD98402_module_init+0x0/0x7 returned 0 after 4 usecs
calling nicstar_init+0x0/0x67 @ 1
initcall nicstar_init+0x0/0x67 returned 0 after 36 usecs
calling hrz_module_init+0x0/0xc6 @ 1
Madge ATM Horizon [Ultra] driver version 1.2.1
initcall hrz_module_init+0x0/0xc6 returned 0 after 1338 usecs
calling fore200e_module_init+0x0/0x23 @ 1
fore200e: FORE Systems 200E-series ATM driver - version 0.3e
initcall fore200e_module_init+0x0/0x23 returned 0 after 788 usecs
calling eni_init+0x0/0x16 @ 1
initcall eni_init+0x0/0x16 returned 0 after 36 usecs
calling idt77252_init+0x0/0x35 @ 1idt77252_init: at b2d5a532
initcall idt77252_init+0x0/0x35 returned 0 after 1873 usecs
calling solos_pci_init+0x0/0x2d @ 1
Solos PCI Driver Version 1.04
initcall solos_pci_init+0x0/0x2d returned 0 after 1393 usecs
calling adummy_init+0x0/0xe6 @ 1
adummy: version 1.0
initcall adummy_init+0x0/0xe6 returned 0 after 749 usecs
calling he_driver_init+0x0/0x16 @ 1
initcall he_driver_init+0x0/0x16 returned 0 after 37 usecs
calling lynx_pci_driver_init+0x0/0x16 @ 1
initcall lynx_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling uio_init+0x0/0xd6 @ 1
initcall uio_init+0x0/0xd6 returned 0 after 32 usecs
calling uio_pdrv_genirq_init+0x0/0x11 @ 1
initcall uio_pdrv_genirq_init+0x0/0x11 returned 0 after 31 usecs
calling uio_dmem_genirq_init+0x0/0x11 @ 1
initcall uio_dmem_genirq_init+0x0/0x11 returned 0 after 42 usecs
calling sercos3_pci_driver_init+0x0/0x16 @ 1
initcall sercos3_pci_driver_init+0x0/0x16 returned 0 after 43 usecs
calling uio_pci_driver_init+0x0/0x16 @ 1
initcall uio_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling mf624_pci_driver_init+0x0/0x16 @ 1
initcall mf624_pci_driver_init+0x0/0x16 returned 0 after 43 usecs
calling cdrom_init+0x0/0xc @ 1
initcall cdrom_init+0x0/0xc returned 0 after 27 usecs
calling nonstatic_sysfs_init+0x0/0xf @ 1
initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 4 usecs
calling yenta_socket_init+0x0/0x16 @ 1
initcall yenta_socket_init+0x0/0x16 returned 0 after 39 usecs
calling pd6729_module_init+0x0/0x16 @ 1
initcall pd6729_module_init+0x0/0x16 returned 0 after 36 usecs
calling init_i82365+0x0/0x497 @ 1
Intel ISA PCIC probe: Intel ISA PCIC probe: not found.
not found.
initcall init_i82365+0x0/0x497 returned -19 after 1954 usecs
calling i82092aa_module_init+0x0/0x16 @ 1
initcall i82092aa_module_init+0x0/0x16 returned 0 after 37 usecs
calling init_tcic+0x0/0x6b1 @ 1
Databook TCIC-2 PCMCIA probe: Databook TCIC-2 PCMCIA probe: not found.
not found.
initcall init_tcic+0x0/0x6b1 returned -19 after 2282 usecs
calling mon_init+0x0/0xec @ 1
initcall mon_init+0x0/0xec returned 0 after 217 usecs
calling ehci_hcd_init+0x0/0xc4 @ 1ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc4 returned 0 after 1397 usecs
calling ehci_pci_init+0x0/0x62 @ 1
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: setting latency timer to 64
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 32 is not supported
ehci-pci 0000:00:02.1: irq 11, io mem 0xfeb00000
ata4: SATA link down (SStatus 0 SControl 300)async_waiting @ 109async_continuing @ 109 after 4 usec
initcall 5_async_port_probe+0x0/0x49 returned 0 after 1146508 usecsasync_continuing @ 112 after 904807 usec
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
scsi 4:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
calling 8_sd_probe_async+0x0/0x1ba @ 91
sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
hub 1-0:1.0: USB hub found
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: Attached scsi generic sg0 type 0
hub 1-0:1.0: 10 ports detected
initcall 6_async_port_probe+0x0/0x49 returned 0 after 1149272 usecsasync_continuing @ 113 after 1139128 usec
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
initcall ehci_pci_init+0x0/0x62 returned 0 after 26604 usecs
calling ehci_platform_init+0x0/0x49 @ 1
ehci-platform: EHCI generic platform driver
initcall ehci_platform_init+0x0/0x49 returned 0 after 1813 usecs
calling oxu_driver_init+0x0/0x11 @ 1
initcall oxu_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ohci_hcd_mod_init+0x0/0x84 @ 1ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
initcall ohci_hcd_mod_init+0x0/0x84 returned 0 after 734 usecs
calling ohci_platform_init+0x0/0x49 @ 1
ohci-platform: OHCI generic platform driver
initcall ohci_platform_init+0x0/0x49 returned 0 after 1807 usecs
calling uhci_hcd_init+0x0/0xbb @ 1uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0xbb returned 0 after 1132 usecs
calling sl811h_driver_init+0x0/0x11 @ 1
initcall sl811h_driver_init+0x0/0x11 returned 0 after 29 usecs
calling u132_hcd_init+0x0/0xaf @ 1
driver u132_hcd
initcall u132_hcd_init+0x0/0xaf returned 0 after 2012 usecs
calling r8a66597_driver_init+0x0/0x11 @ 1
initcall r8a66597_driver_init+0x0/0x11 returned 0 after 29 usecs
calling isp1760_init+0x0/0x5c @ 1
initcall isp1760_init+0x0/0x5c returned 0 after 162 usecs
calling ssb_hcd_init+0x0/0x11 @ 1
initcall ssb_hcd_init+0x0/0x11 returned 0 after 31 usecs
calling fusbh200_hcd_init+0x0/0xae @ 1fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
initcall fusbh200_hcd_init+0x0/0xae returned 0 after 1469 usecs
calling fotg210_hcd_init+0x0/0xae @ 1fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
initcall fotg210_hcd_init+0x0/0xae returned 0 after 2277 usecs
calling c67x00_driver_init+0x0/0x11 @ 1
initcall c67x00_driver_init+0x0/0x11 returned 0 after 29 usecs
calling acm_init+0x0/0xd8 @ 1
usbcore: registered new interface driver cdc_acmcdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
initcall acm_init+0x0/0xd8 returned 0 after 2002 usecs
calling usblp_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usblp
initcall usblp_driver_init+0x0/0x16 returned 0 after 333 usecs
calling wdm_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_wdm
initcall wdm_driver_init+0x0/0x16 returned 0 after 1646 usecs
calling usbtmc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbtmc
initcall usbtmc_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling usb_storage_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x16 returned 0 after 1346 usecs
calling alauda_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-alauda
initcall alauda_driver_init+0x0/0x16 returned 0 after 1178 usecs
calling datafab_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-datafab
initcall datafab_driver_init+0x0/0x16 returned 0 after 1348 usecs
calling ene_ub6250_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums_eneub6250
initcall ene_ub6250_driver_init+0x0/0x16 returned 0 after 709 usecs
calling freecom_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-freecom
initcall freecom_driver_init+0x0/0x16 returned 0 after 1347 usecs
calling isd200_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-isd200
initcall isd200_driver_init+0x0/0x16 returned 0 after 205 usecs
calling jumpshot_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-jumpshot
initcall jumpshot_driver_init+0x0/0x16 returned 0 after 539 usecs
calling realtek_cr_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-realtek
initcall realtek_cr_driver_init+0x0/0x16 returned 0 after 1348 usecs
calling usb_serial_init+0x0/0x17f @ 1
usbcore: registered new interface driver usbserial
initcall usb_serial_init+0x0/0x17f returned 0 after 1035 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ark3116
usbserial: USB Serial support registered for ark3116
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2019 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver belkin_sa
usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 3737 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1209 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1681 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver cyberjack
usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2382 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver digi_acceleport
usbserial: USB Serial support registered for Digi 2 port USB adapter
usbserial: USB Serial support registered for Digi 4 port USB adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 3299 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver empeg
usbserial: USB Serial support registered for empeg
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2316 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver f81232
usbserial: USB Serial support registered for f81232
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1679 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1807 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver garmin_gps
usbserial: USB Serial support registered for Garmin GPS usb/tty
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1457 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver iuu_phoenix
usbserial: USB Serial support registered for iuu_phoenix
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2395 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver kl5kusb105
usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1666 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver mct_u232
usbserial: USB Serial support registered for MCT U232
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1379 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver metro_usb
usbserial: USB Serial support registered for Metrologic USB to Serial
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2304 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver mos7720
usbserial: USB Serial support registered for Moschip 2 port adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1627 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver mos7840
usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1876 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver navman
usbserial: USB Serial support registered for navman
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1680 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver opticon
usbserial: USB Serial support registered for opticon
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2018 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver oti6858
usbserial: USB Serial support registered for oti6858
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2018 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1679 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver quatech2
usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1238 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver sierra
usbserial: USB Serial support registered for Sierra USB modem
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2397 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver usb_serial_simple
usbserial: USB Serial support registered for zio
usbserial: USB Serial support registered for funsoft
usbserial: USB Serial support registered for flashloader
usbserial: USB Serial support registered for vivopay
usbserial: USB Serial support registered for moto_modem
usbserial: USB Serial support registered for hp4x
usbserial: USB Serial support registered for suunto
usbserial: USB Serial support registered for siemens_mpi
initcall usb_serial_module_init+0x0/0x19 returned 0 after 8761 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ti_usb_3410_5052
usbserial: USB Serial support registered for TI USB 3410 1 port adapter
usbserial: USB Serial support registered for TI USB 5052 2 port adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2533 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver visor
usbserial: USB Serial support registered for Handspring Visor / Palm OS
usbserial: USB Serial support registered for Sony Clie 5.0
usbserial: USB Serial support registered for Sony Clie 3.5
initcall usb_serial_module_init+0x0/0x19 returned 0 after 4736 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver wishbone_serial
usbserial: USB Serial support registered for wishbone_serial
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1796 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver whiteheat
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
initcall usb_serial_module_init+0x0/0x19 returned 0 after 3078 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver keyspan_pda
usbserial: USB Serial support registered for Keyspan PDA
usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2662 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver xsens_mt
usbserial: USB Serial support registered for xsens_mt
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1380 usecs
calling adu_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver adutux
initcall adu_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling cypress_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cypress_cy7c63
initcall cypress_driver_init+0x0/0x16 returned 0 after 1856 usecs
calling cytherm_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cytherm
initcall cytherm_driver_init+0x0/0x16 returned 0 after 1646 usecs
calling emi26_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver emi26 - firmware loader
initcall emi26_driver_init+0x0/0x16 returned 0 after 1427 usecs
calling emi62_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver emi62 - firmware loader
initcall emi62_driver_init+0x0/0x16 returned 0 after 1425 usecs
calling ftdi_elan_init+0x0/0x180 @ 1
driver ftdi-elan
ata6.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata6: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
usbcore: registered new interface driver ftdi-elan
initcall ftdi_elan_init+0x0/0x180 returned 0 after 4651 usecs
calling idmouse_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver idmouse
initcall idmouse_driver_init+0x0/0x16 returned 0 after 1643 usecs
calling iowarrior_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver iowarrior
initcall iowarrior_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling lcd_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usblcd
initcall lcd_driver_init+0x0/0x16 returned 0 after 1477 usecs
calling ld_usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ldusb
initcall ld_usb_driver_init+0x0/0x16 returned 0 after 330 usecs
calling led_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbled
initcall led_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling tower_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver legousbtower
initcall tower_driver_init+0x0/0x16 returned 0 after 539 usecs
calling rio_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rio500
initcall rio_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling usbtest_init+0x0/0x54 @ 1
usbcore: registered new interface driver usbtest
initcall usbtest_init+0x0/0x54 returned 0 after 670 usecs
calling ehset_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usb_ehset_test
initcall ehset_driver_init+0x0/0x16 returned 0 after 879 usecs
calling tv_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver trancevibrator
initcall tv_driver_init+0x0/0x16 returned 0 after 878 usecs
calling uss720_init+0x0/0x52 @ 1
usbcore: registered new interface driver uss720
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
uss720: NOTE: this is a special purpose driver to allow nonstandard
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
uss720: If you just want to connect to a printer, use usblp instead
initcall uss720_init+0x0/0x52 returned 0 after 5118 usecs
calling sevseg_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbsevseg
initcall sevseg_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling usb3503_init+0x0/0x4a @ 1
initcall usb3503_init+0x0/0x4a returned 0 after 76 usecs
calling usb_sisusb_init+0x0/0x1b @ 1
usbcore: registered new interface driver sisusb
initcall usb_sisusb_init+0x0/0x1b returned 0 after 501 usecs
calling samsung_usb2phy_driver_init+0x0/0x11 @ 1
initcall samsung_usb2phy_driver_init+0x0/0x11 returned 0 after 29 usecs
calling samsung_usb3phy_driver_init+0x0/0x11 @ 1
initcall samsung_usb3phy_driver_init+0x0/0x11 returned 0 after 28 usecs
calling gpio_vbus_driver_init+0x0/0x11 @ 1
initcall gpio_vbus_driver_init+0x0/0x11 returned 0 after 27 usecs
calling rcar_usb_phy_driver_init+0x0/0x11 @ 1
initcall rcar_usb_phy_driver_init+0x0/0x11 returned 0 after 29 usecs
calling musb_init+0x0/0x1e @ 1
initcall musb_init+0x0/0x1e returned 0 after 27 usecs
calling tusb_driver_init+0x0/0x11 @ 1
initcall tusb_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ci_hdrc_driver_init+0x0/0x11 @ 1
initcall ci_hdrc_driver_init+0x0/0x11 returned 0 after 35 usecs
calling ci_hdrc_msm_driver_init+0x0/0x11 @ 1
initcall ci_hdrc_msm_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ci_hdrc_pci_driver_init+0x0/0x16 @ 1
initcall ci_hdrc_pci_driver_init+0x0/0x16 returned 0 after 58 usecs
calling ci_hdrc_imx_driver_init+0x0/0x11 @ 1
initcall ci_hdrc_imx_driver_init+0x0/0x11 returned 0 after 28 usecs
calling usbmisc_imx_driver_init+0x0/0x11 @ 1
initcall usbmisc_imx_driver_init+0x0/0x11 returned 0 after 28 usecs
calling renesas_usbhs_driver_init+0x0/0x11 @ 1
initcall renesas_usbhs_driver_init+0x0/0x11 returned 0 after 28 usecs
calling gadget_cfs_init+0x0/0x19 @ 1
initcall gadget_cfs_init+0x0/0x19 returned 0 after 25 usecs
calling init+0x0/0x2e8 @ 1dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005dummy_hcd dummy_hcd.0: Dummy host controller
ata6.01: configured for UDMA/33dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 2async_waiting @ 113async_continuing @ 113 after 4 usec
hub 2-0:1.0: USB hub found
scsi 5:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
scsi 5:0:1:0: Attached scsi generic sg1 type 5
hub 2-0:1.0: 1 port detected
initcall 7_async_port_probe+0x0/0x49 returned 0 after 1455987 usecs
initcall init+0x0/0x2e8 returned 0 after 12075 usecs
calling net2272_init+0x0/0x3c @ 1
initcall net2272_init+0x0/0x3c returned 0 after 94 usecs
calling udc_pci_driver_init+0x0/0x16 @ 1
initcall udc_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling udc_driver_init+0x0/0x11 @ 1
initcall udc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling r8a66597_driver_init+0x0/0x14 @ 1
initcall r8a66597_driver_init+0x0/0x14 returned -19 after 49 usecs
calling ncmmod_init+0x0/0xf @ 1
initcall ncmmod_init+0x0/0xf returned 0 after 18 usecs
calling init+0x0/0xf @ 1
udc dummy_udc.0: registering UDC driver [g_ncm]
using random self ethernet address
using random host ethernet address
g_ncm gadget: adding config #1 'CDC Ethernet (NCM)'/b2c40ce0 g_ncm gadget: adding 'cdc_network'/eb816f00 to config 'CDC Ethernet (NCM)'/b2c40ce0 usb0: HOST MAC aa:99:de:d4:76:38 usb0: MAC 2a:0a:99:90:0a:c2 g_ncm gadget: CDC Network: dual speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int g_ncm gadget: cfg 1/b2c40ce0 speeds: high full g_ncm gadget: interface 0 = cdc_network/eb816f00 g_ncm gadget: interface 1 = cdc_network/eb816f00 g_ncm gadget: NCM Gadget g_ncm gadget: g_ncm ready dummy_udc dummy_udc.0: binding gadget driver 'g_ncm' dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
initcall init+0x0/0xf returned 0 after 15500 usecs
calling i8042_init+0x0/0x33e @ 1
i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
initcall i8042_init+0x0/0x33e returned 0 after 4027 usecs
calling parkbd_init+0x0/0x177 @ 1
parport0: cannot grant exclusive access for device parkbd
initcall parkbd_init+0x0/0x177 returned -19 after 241 usecs
calling serport_init+0x0/0x2c @ 1
initcall serport_init+0x0/0x2c returned 0 after 4 usecs
calling ct82c710_init+0x0/0x137 @ 1
initcall ct82c710_init+0x0/0x137 returned -19 after 13 usecs
calling pcips2_driver_init+0x0/0x16 @ 1
initcall pcips2_driver_init+0x0/0x16 returned 0 after 47 usecs
calling ps2mult_drv_init+0x0/0x16 @ 1
initcall ps2mult_drv_init+0x0/0x16 returned 0 after 29 usecs
calling altera_ps2_driver_init+0x0/0x11 @ 1
initcall altera_ps2_driver_init+0x0/0x11 returned 0 after 31 usecs
calling arc_ps2_driver_init+0x0/0x11 @ 1
initcall arc_ps2_driver_init+0x0/0x11 returned 0 after 31 usecs
calling apbps2_of_driver_init+0x0/0x11 @ 1
initcall apbps2_of_driver_init+0x0/0x11 returned 0 after 30 usecs
calling olpc_apsp_driver_init+0x0/0x11 @ 1
initcall olpc_apsp_driver_init+0x0/0x11 returned 0 after 44 usecs
calling fm801_gp_driver_init+0x0/0x16 @ 1
initcall fm801_gp_driver_init+0x0/0x16 returned 0 after 38 usecs
calling l4_init+0x0/0x27e @ 1
initcall l4_init+0x0/0x27e returned -19 after 15 usecs
calling ns558_init+0x0/0x2fe @ 1
initcall ns558_init+0x0/0x2fe returned 0 after 7856 usecs
calling mousedev_init+0x0/0x7c @ 1
mousedev: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x7c returned 0 after 1749 usecs
calling joydev_init+0x0/0xf @ 1
initcall joydev_init+0x0/0xf returned 0 after 4 usecs
calling evdev_init+0x0/0xf @ 1
initcall evdev_init+0x0/0xf returned 0 after 4 usecs
calling adp5588_driver_init+0x0/0x11 @ 1
initcall adp5588_driver_init+0x0/0x11 returned 0 after 32 usecs
calling adp5589_driver_init+0x0/0x11 @ 1
initcall adp5589_driver_init+0x0/0x11 returned 0 after 26 usecs
calling atkbd_init+0x0/0x16 @ 1
initcall atkbd_init+0x0/0x16 returned 0 after 29 usecs
calling cros_ec_keyb_driver_init+0x0/0x11 @ 1
initcall cros_ec_keyb_driver_init+0x0/0x11 returned 0 after 40 usecs
calling events_driver_init+0x0/0x11 @ 1
initcall events_driver_init+0x0/0x11 returned 0 after 29 usecs
calling gpio_keys_polled_driver_init+0x0/0x11 @ 1
initcall gpio_keys_polled_driver_init+0x0/0x11 returned 0 after 31 usecs
calling lm8323_i2c_driver_init+0x0/0x11 @ 1
initcall lm8323_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lm8333_driver_init+0x0/0x11 @ 1
initcall lm8333_driver_init+0x0/0x11 returned 0 after 26 usecs
calling matrix_keypad_driver_init+0x0/0x11 @ 1
initcall matrix_keypad_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max7359_i2c_driver_init+0x0/0x11 @ 1
initcall max7359_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs
calling mcs_touchkey_driver_init+0x0/0x11 @ 1
initcall mcs_touchkey_driver_init+0x0/0x11 returned 0 after 26 usecs
calling mpr_touchkey_driver_init+0x0/0x11 @ 1
initcall mpr_touchkey_driver_init+0x0/0x11 returned 0 after 26 usecs
calling nkbd_drv_init+0x0/0x16 @ 1
initcall nkbd_drv_init+0x0/0x16 returned 0 after 36 usecs
calling opencores_kbd_device_driver_init+0x0/0x11 @ 1
initcall opencores_kbd_device_driver_init+0x0/0x11 returned 0 after 31 usecs
calling qt2160_driver_init+0x0/0x11 @ 1
initcall qt2160_driver_init+0x0/0x11 returned 0 after 26 usecs
calling skbd_drv_init+0x0/0x16 @ 1
initcall skbd_drv_init+0x0/0x16 returned 0 after 28 usecs
calling sunkbd_drv_init+0x0/0x16 @ 1
initcall sunkbd_drv_init+0x0/0x16 returned 0 after 27 usecs
calling tc3589x_keypad_driver_init+0x0/0x11 @ 1
initcall tc3589x_keypad_driver_init+0x0/0x11 returned 0 after 45 usecs
calling twl4030_kp_driver_init+0x0/0x11 @ 1
initcall twl4030_kp_driver_init+0x0/0x11 returned 0 after 31 usecs
calling xtkbd_drv_init+0x0/0x16 @ 1
initcall xtkbd_drv_init+0x0/0x16 returned 0 after 36 usecs
calling auo_pixcir_driver_init+0x0/0x11 @ 1
initcall auo_pixcir_driver_init+0x0/0x11 returned 0 after 27 usecs
calling cy8ctmg110_driver_init+0x0/0x11 @ 1
initcall cy8ctmg110_driver_init+0x0/0x11 returned 0 after 94 usecs
calling cyttsp_i2c_driver_init+0x0/0x11 @ 1
initcall cyttsp_i2c_driver_init+0x0/0x11 returned 0 after 49 usecs
calling da9034_touch_driver_init+0x0/0x11 @ 1
initcall da9034_touch_driver_init+0x0/0x11 returned 0 after 31 usecs
calling dynapro_drv_init+0x0/0x16 @ 1
initcall dynapro_drv_init+0x0/0x16 returned 0 after 27 usecs
calling hampshire_drv_init+0x0/0x16 @ 1
initcall hampshire_drv_init+0x0/0x16 returned 0 after 27 usecs
calling gunze_drv_init+0x0/0x16 @ 1
initcall gunze_drv_init+0x0/0x16 returned 0 after 27 usecs
calling eeti_ts_driver_init+0x0/0x11 @ 1
initcall eeti_ts_driver_init+0x0/0x11 returned 0 after 32 usecs
calling elo_drv_init+0x0/0x16 @ 1
initcall elo_drv_init+0x0/0x16 returned 0 after 27 usecs
calling egalax_ts_driver_init+0x0/0x11 @ 1
initcall egalax_ts_driver_init+0x0/0x11 returned 0 after 26 usecs
calling fujitsu_drv_init+0x0/0x16 @ 1
initcall fujitsu_drv_init+0x0/0x16 returned 0 after 27 usecs
calling max11801_ts_driver_init+0x0/0x11 @ 1
initcall max11801_ts_driver_init+0x0/0x11 returned 0 after 25 usecs
calling mcs5000_ts_driver_init+0x0/0x11 @ 1
initcall mcs5000_ts_driver_init+0x0/0x11 returned 0 after 25 usecs
calling mms114_driver_init+0x0/0x11 @ 1
initcall mms114_driver_init+0x0/0x11 returned 0 after 25 usecs
calling mtouch_drv_init+0x0/0x16 @ 1
initcall mtouch_drv_init+0x0/0x16 returned 0 after 27 usecs
calling mk712_init+0x0/0x1c1 @ 1
mk712: device not present
initcall mk712_init+0x0/0x1c1 returned -19 after 683 usecs
calling htcpen_isa_init+0x0/0xa @ 1
initcall htcpen_isa_init+0x0/0xa returned -19 after 4 usecs
calling usbtouch_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbtouchscreen
initcall usbtouch_driver_init+0x0/0x16 returned 0 after 879 usecs
calling ti_tsc_driver_init+0x0/0x11 @ 1
initcall ti_tsc_driver_init+0x0/0x11 returned 0 after 29 usecs
calling touchit213_drv_init+0x0/0x16 @ 1
initcall touchit213_drv_init+0x0/0x16 returned 0 after 39 usecs
calling tr_drv_init+0x0/0x16 @ 1
initcall tr_drv_init+0x0/0x16 returned 0 after 28 usecs
calling tw_drv_init+0x0/0x16 @ 1
initcall tw_drv_init+0x0/0x16 returned 0 after 27 usecs
calling tsc2007_driver_init+0x0/0x11 @ 1
initcall tsc2007_driver_init+0x0/0x11 returned 0 after 26 usecs
calling w8001_drv_init+0x0/0x16 @ 1
initcall w8001_drv_init+0x0/0x16 returned 0 after 34 usecs
calling wacom_i2c_driver_init+0x0/0x11 @ 1
initcall wacom_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs
calling wm831x_ts_driver_init+0x0/0x11 @ 1
initcall wm831x_ts_driver_init+0x0/0x11 returned 0 after 31 usecs
calling tps6507x_ts_driver_init+0x0/0x11 @ 1
initcall tps6507x_ts_driver_init+0x0/0x11 returned 0 after 30 usecs
calling pm860x_onkey_driver_init+0x0/0x11 @ 1
initcall pm860x_onkey_driver_init+0x0/0x11 returned 0 after 31 usecs
calling bma150_driver_init+0x0/0x11 @ 1
initcall bma150_driver_init+0x0/0x11 returned 0 after 26 usecs
calling gp2a_i2c_driver_init+0x0/0x11 @ 1
initcall gp2a_i2c_driver_init+0x0/0x11 returned 0 after 25 usecs
calling gpio_tilt_polled_driver_init+0x0/0x11 @ 1
initcall gpio_tilt_polled_driver_init+0x0/0x11 returned 0 after 31 usecs
calling keyspan_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver keyspan_remote
initcall keyspan_driver_init+0x0/0x16 returned 0 after 879 usecs
calling mpu3050_i2c_driver_init+0x0/0x11 @ 1
initcall mpu3050_i2c_driver_init+0x0/0x11 returned 0 after 33 usecs
calling pcf50633_input_driver_init+0x0/0x11 @ 1
initcall pcf50633_input_driver_init+0x0/0x11 returned 0 after 30 usecs
calling pcf8574_kp_driver_init+0x0/0x11 @ 1
initcall pcf8574_kp_driver_init+0x0/0x11 returned 0 after 32 usecs
calling powermate_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver powermate
initcall powermate_driver_init+0x0/0x16 returned 0 after 1008 usecs
calling twl4030_pwrbutton_driver_init+0x0/0x14 @ 1
initcall twl4030_pwrbutton_driver_init+0x0/0x14 returned -19 after 49 usecs
calling twl4030_vibra_driver_init+0x0/0x11 @ 1
initcall twl4030_vibra_driver_init+0x0/0x11 returned 0 after 30 usecs
calling twl6040_vibra_driver_init+0x0/0x11 @ 1
initcall twl6040_vibra_driver_init+0x0/0x11 returned 0 after 31 usecs
calling uinput_init+0x0/0xf @ 1
gameport gameport0: NS558 PnP Gameport is pnp00:10/gameport0, io 0x201, speed 903kHz dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
initcall uinput_init+0x0/0xf returned 0 after 17685 usecs
calling wm831x_on_driver_init+0x0/0x11 @ 1
initcall wm831x_on_driver_init+0x0/0x11 returned 0 after 36 usecs
calling slidebar_init+0x0/0xab @ 1ideapad_slidebar: DMI does not match
initcall slidebar_init+0x0/0xab returned -19 after 591 usecs
calling i2o_iop_init+0x0/0x45 @ 1
I2O subsystem v1.325
i2o: max drivers = 8
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
initcall i2o_iop_init+0x0/0x45 returned 0 after 3704 usecs
calling i2o_config_init+0x0/0x3f @ 1
I2O Configuration OSM v1.323
initcall i2o_config_init+0x0/0x3f returned 0 after 1217 usecs
calling i2o_bus_init+0x0/0x3e @ 1
I2O Bus Adapter OSM v1.317
initcall i2o_bus_init+0x0/0x3e returned 0 after 858 usecs
calling i2o_scsi_init+0x0/0x3e @ 1
I2O SCSI Peripheral OSM v1.316
initcall i2o_scsi_init+0x0/0x3e returned 0 after 1550 usecs
calling i2o_proc_init+0x0/0x169 @ 1
I2O ProcFS OSM v1.316
initcall i2o_proc_init+0x0/0x169 returned 0 after 1018 usecs
calling pm80x_rtc_driver_init+0x0/0x11 @ 1
initcall pm80x_rtc_driver_init+0x0/0x11 returned 0 after 35 usecs
calling bq32k_driver_init+0x0/0x11 @ 1
initcall bq32k_driver_init+0x0/0x11 returned 0 after 31 usecs
calling cmos_init+0x0/0x5e @ 1rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0rtc_cmos 00:03: alarms up to one day, 114 bytes nvram
initcall cmos_init+0x0/0x5e returned 0 after 2174 usecs
calling ds1286_platform_driver_init+0x0/0x11 @ 1
initcall ds1286_platform_driver_init+0x0/0x11 returned 0 after 31 usecs
calling ds1307_driver_init+0x0/0x11 @ 1
initcall ds1307_driver_init+0x0/0x11 returned 0 after 52 usecs
calling ds1374_driver_init+0x0/0x11 @ 1
initcall ds1374_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ds1511_rtc_driver_init+0x0/0x11 @ 1
initcall ds1511_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ds1672_driver_init+0x0/0x11 @ 1
initcall ds1672_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ds1742_rtc_driver_init+0x0/0x11 @ 1
initcall ds1742_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ds3232_driver_init+0x0/0x11 @ 1
initcall ds3232_driver_init+0x0/0x11 returned 0 after 33 usecs
calling em3027_driver_init+0x0/0x11 @ 1
initcall em3027_driver_init+0x0/0x11 returned 0 after 32 usecs
calling fm3130_driver_init+0x0/0x11 @ 1
initcall fm3130_driver_init+0x0/0x11 returned 0 after 25 usecs
calling hid_time_platform_driver_init+0x0/0x11 @ 1
initcall hid_time_platform_driver_init+0x0/0x11 returned 0 after 31 usecs
calling isl1208_driver_init+0x0/0x11 @ 1
initcall isl1208_driver_init+0x0/0x11 returned 0 after 27 usecs
calling isl12022_driver_init+0x0/0x11 @ 1
initcall isl12022_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lp8788_rtc_driver_init+0x0/0x11 @ 1
initcall lp8788_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs
calling m48t35_platform_driver_init+0x0/0x11 @ 1
initcall m48t35_platform_driver_init+0x0/0x11 returned 0 after 30 usecs
calling m48t86_rtc_platform_driver_init+0x0/0x11 @ 1
initcall m48t86_rtc_platform_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max6900_driver_init+0x0/0x11 @ 1
initcall max6900_driver_init+0x0/0x11 returned 0 after 34 usecs
calling msm6242_rtc_driver_init+0x0/0x14 @ 1
initcall msm6242_rtc_driver_init+0x0/0x14 returned -19 after 62 usecs
calling pcf2127_driver_init+0x0/0x11 @ 1
initcall pcf2127_driver_init+0x0/0x11 returned 0 after 26 usecs
calling pcf8523_driver_init+0x0/0x11 @ 1
initcall pcf8523_driver_init+0x0/0x11 returned 0 after 27 usecs
calling pcf50633_rtc_driver_init+0x0/0x11 @ 1
initcall pcf50633_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling rs5c372_driver_init+0x0/0x11 @ 1
initcall rs5c372_driver_init+0x0/0x11 returned 0 after 27 usecs
calling rv3029c2_driver_init+0x0/0x11 @ 1
initcall rv3029c2_driver_init+0x0/0x11 returned 0 after 26 usecs
calling rx8581_driver_init+0x0/0x11 @ 1
initcall rx8581_driver_init+0x0/0x11 returned 0 after 26 usecs
calling snvs_rtc_driver_init+0x0/0x11 @ 1
initcall snvs_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling test_init+0x0/0xa2 @ 1
rtc-test rtc-test.0: rtc core: registered test as rtc1
rtc-test rtc-test.1: rtc core: registered test as rtc2
initcall test_init+0x0/0xa2 returned 0 after 1551 usecs
calling twl4030rtc_driver_init+0x0/0x11 @ 1
initcall twl4030rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling tps65910_rtc_driver_init+0x0/0x11 @ 1
initcall tps65910_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling rtc_device_driver_init+0x0/0x11 @ 1
initcall rtc_device_driver_init+0x0/0x11 returned 0 after 31 usecs
calling wm831x_rtc_driver_init+0x0/0x11 @ 1
initcall wm831x_rtc_driver_init+0x0/0x11 returned 0 after 37 usecs
calling x1205_driver_init+0x0/0x11 @ 1
initcall x1205_driver_init+0x0/0x11 returned 0 after 27 usecs
calling moxart_rtc_driver_init+0x0/0x11 @ 1
initcall moxart_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling smbalert_driver_init+0x0/0x11 @ 1
initcall smbalert_driver_init+0x0/0x11 returned 0 after 27 usecs
calling i2c_dev_init+0x0/0xb8 @ 1
i2c /dev entries driver
initcall i2c_dev_init+0x0/0xb8 returned 0 after 1356 usecs
calling ali1535_driver_init+0x0/0x16 @ 1
initcall ali1535_driver_init+0x0/0x16 returned 0 after 47 usecs
calling amd756_driver_init+0x0/0x16 @ 1
initcall amd756_driver_init+0x0/0x16 returned 0 after 45 usecs
calling amd756_s4882_init+0x0/0x261 @ 1
initcall amd756_s4882_init+0x0/0x261 returned -19 after 4 usecs
calling i2c_i801_init+0x0/0x16 @ 1
initcall i2c_i801_init+0x0/0x16 returned 0 after 55 usecs
calling smbus_sch_driver_init+0x0/0x11 @ 1
initcall smbus_sch_driver_init+0x0/0x11 returned 0 after 38 usecs
calling ismt_driver_init+0x0/0x16 @ 1
initcall ismt_driver_init+0x0/0x16 returned 0 after 38 usecs
calling nforce2_driver_init+0x0/0x16 @ 1
sd 4:0:0:0: [sda] Attached SCSI disk
initcall 8_sd_probe_async+0x0/0x1ba returned 0 after 655420 usecs
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: nForce2 SMBus adapter at 0x4c00
i2c i2c-1: Transaction failed (0x10)!g_ncm gadget: resumedummy_hcd dummy_hcd.0: port status 0x00100503 has changes
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: nForce2 SMBus adapter at 0x4c40
initcall nforce2_driver_init+0x0/0x16 returned 0 after 54017 usecs
calling nforce2_s4985_init+0x0/0x26d @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: PCA9556 configuration failed
initcall nforce2_s4985_init+0x0/0x26d returned -5 after 4239 usecs
calling piix4_driver_init+0x0/0x16 @ 1
initcall piix4_driver_init+0x0/0x16 returned 0 after 54 usecs
calling i2c_sis5595_init+0x0/0x16 @ 1
initcall i2c_sis5595_init+0x0/0x16 returned 0 after 46 usecs
calling sis630_driver_init+0x0/0x16 @ 1
initcall sis630_driver_init+0x0/0x16 returned 0 after 39 usecs
calling vt586b_driver_init+0x0/0x16 @ 1
initcall vt586b_driver_init+0x0/0x16 returned 0 after 45 usecs
calling i2c_vt596_init+0x0/0x16 @ 1
initcall i2c_vt596_init+0x0/0x16 returned 0 after 40 usecs
calling dw_i2c_driver_init+0x0/0x16 @ 1
initcall dw_i2c_driver_init+0x0/0x16 returned 0 after 39 usecs
calling pch_pcidriver_init+0x0/0x16 @ 1
initcall pch_pcidriver_init+0x0/0x16 returned 0 after 38 usecs
calling kempld_i2c_driver_init+0x0/0x11 @ 1
initcall kempld_i2c_driver_init+0x0/0x11 returned 0 after 52 usecs
calling i2c_pca_pf_driver_init+0x0/0x11 @ 1
initcall i2c_pca_pf_driver_init+0x0/0x11 returned 0 after 31 usecs
calling simtec_i2c_driver_init+0x0/0x11 @ 1
initcall simtec_i2c_driver_init+0x0/0x11 returned 0 after 31 usecs
calling xiic_i2c_driver_init+0x0/0x11 @ 1
initcall xiic_i2c_driver_init+0x0/0x11 returned 0 after 31 usecs
calling diolan_u2c_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver i2c-diolan-u2c
initcall diolan_u2c_driver_init+0x0/0x16 returned 0 after 877 usecs
calling i2c_parport_init+0x0/0x4a @ 1
i2c-parport: adapter type unspecified
initcall i2c_parport_init+0x0/0x4a returned -19 after 759 usecs
calling i2c_parport_init+0x0/0x15d @ 1
i2c-parport-light: adapter type unspecified
initcall i2c_parport_init+0x0/0x15d returned -19 after 800 usecs
calling taos_init+0x0/0x16 @ 1
initcall taos_init+0x0/0x16 returned 0 after 33 usecs
calling i2c_tiny_usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver i2c-tiny-usb
initcall i2c_tiny_usb_driver_init+0x0/0x16 returned 0 after 1529 usecs
calling scx200_acb_init+0x0/0x7b @ 1scx200_acb: NatSemi SCx200 ACCESS.bus Driver
initcall scx200_acb_init+0x0/0x7b returned 0 after 1005 usecs
calling msp_driver_init+0x0/0x11 @ 1
initcall msp_driver_init+0x0/0x11 returned 0 after 59 usecs
calling tda7432_driver_init+0x0/0x11 @ 1
initcall tda7432_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tda9840_driver_init+0x0/0x11 @ 1
initcall tda9840_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tea6415c_driver_init+0x0/0x11 @ 1
initcall tea6415c_driver_init+0x0/0x11 returned 0 after 28 usecs
calling saa711x_driver_init+0x0/0x11 @ 1
initcall saa711x_driver_init+0x0/0x11 returned 0 after 29 usecs
calling saa717x_driver_init+0x0/0x11 @ 1
initcall saa717x_driver_init+0x0/0x11 returned 0 after 27 usecs
calling saa7127_driver_init+0x0/0x11 @ 1
initcall saa7127_driver_init+0x0/0x11 returned 0 after 29 usecs
calling saa7185_driver_init+0x0/0x11 @ 1
initcall saa7185_driver_init+0x0/0x11 returned 0 after 27 usecs
calling saa7191_driver_init+0x0/0x11 @ 1
initcall saa7191_driver_init+0x0/0x11 returned 0 after 27 usecs
calling adv7343_driver_init+0x0/0x11 @ 1
initcall adv7343_driver_init+0x0/0x11 returned 0 after 36 usecs
calling adv7393_driver_init+0x0/0x11 @ 1
initcall adv7393_driver_init+0x0/0x11 returned 0 after 28 usecs
calling vpx3220_driver_init+0x0/0x11 @ 1
initcall vpx3220_driver_init+0x0/0x11 returned 0 after 43 usecs
calling bt819_driver_init+0x0/0x11 @ 1
initcall bt819_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ks0127_driver_init+0x0/0x11 @ 1
initcall ks0127_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ths7303_driver_init+0x0/0x11 @ 1
initcall ths7303_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ths8200_driver_init+0x0/0x11 @ 1
initcall ths8200_driver_init+0x0/0x11 returned 0 after 46 usecs
calling tvp5150_driver_init+0x0/0x11 @ 1
initcall tvp5150_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tw2804_driver_init+0x0/0x11 @ 1
initcall tw2804_driver_init+0x0/0x11 returned 0 after 29 usecs
calling tw9903_driver_init+0x0/0x11 @ 1
initcall tw9903_driver_init+0x0/0x11 returned 0 after 107 usecs
calling tw9906_driver_init+0x0/0x11 @ 1
initcall tw9906_driver_init+0x0/0x11 returned 0 after 45 usecs
calling cs53l32a_driver_init+0x0/0x11 @ 1
initcall cs53l32a_driver_init+0x0/0x11 returned 0 after 36 usecs
calling m52790_driver_init+0x0/0x11 @ 1
initcall m52790_driver_init+0x0/0x11 returned 0 after 27 usecs
calling tlv320aic23b_driver_init+0x0/0x11 @ 1
initcall tlv320aic23b_driver_init+0x0/0x11 returned 0 after 28 usecs
calling uda1342_driver_init+0x0/0x11 @ 1
initcall uda1342_driver_init+0x0/0x11 returned 0 after 27 usecs
calling wm8775_driver_init+0x0/0x11 @ 1
initcall wm8775_driver_init+0x0/0x11 returned 0 after 27 usecs
calling wm8739_driver_init+0x0/0x11 @ 1
initcall wm8739_driver_init+0x0/0x11 returned 0 after 27 usecs
calling vp27smpx_driver_init+0x0/0x11 @ 1
initcall vp27smpx_driver_init+0x0/0x11 returned 0 after 36 usecs
calling upd64031a_driver_init+0x0/0x11 @ 1
initcall upd64031a_driver_init+0x0/0x11 returned 0 after 27 usecs
calling upd64083_driver_init+0x0/0x11 @ 1
initcall upd64083_driver_init+0x0/0x11 returned 0 after 34 usecs
calling ml86v7667_i2c_driver_init+0x0/0x11 @ 1
initcall ml86v7667_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs
calling au8522_driver_init+0x0/0x11 @ 1
initcall au8522_driver_init+0x0/0x11 returned 0 after 27 usecs
calling flexcop_module_init+0x0/0x14 @ 1
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully initcall flexcop_module_init+0x0/0x14 returned 0 after 735 usecs
calling saa7146_vv_init_module+0x0/0x7 @ 1
initcall saa7146_vv_init_module+0x0/0x7 returned 0 after 4 usecs
calling smscore_module_init+0x0/0x6b @ 1
initcall smscore_module_init+0x0/0x6b returned 0 after 4 usecs
calling smsdvb_module_init+0x0/0x5f @ 1
initcall smsdvb_module_init+0x0/0x5f returned 0 after 47 usecs
calling budget_init+0x0/0xf @ 1
saa7146: register extension 'budget dvb'
initcall budget_init+0x0/0xf returned 0 after 329 usecs
calling budget_av_init+0x0/0xf @ 1
saa7146: register extension 'budget_av'
initcall budget_av_init+0x0/0xf returned 0 after 1134 usecs
calling av7110_init+0x0/0xf @ 1
saa7146: register extension 'av7110'
initcall av7110_init+0x0/0xf returned 0 after 1603 usecs
calling flexcop_pci_driver_init+0x0/0x16 @ 1
initcall flexcop_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling pluto2_driver_init+0x0/0x16 @ 1
initcall pluto2_driver_init+0x0/0x16 returned 0 after 43 usecs
calling pt1_driver_init+0x0/0x16 @ 1
initcall pt1_driver_init+0x0/0x16 returned 0 after 37 usecs
calling module_init_ngene+0x0/0x23 @ 1
nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
initcall module_init_ngene+0x0/0x23 returned 0 after 443 usecs
calling module_init_ddbridge+0x0/0xa1 @ 1
Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH initcall module_init_ddbridge+0x0/0xa1 returned 0 after 927 usecs
calling cx25821_init+0x0/0x3d @ 1
cx25821: driver version 0.0.106 loaded
initcall cx25821_init+0x0/0x3d returned 0 after 963 usecs
calling ttusb_dec_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ttusb-dec
initcall ttusb_dec_driver_init+0x0/0x16 returned 0 after 1010 usecs
calling ttusb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ttusb
initcall ttusb_driver_init+0x0/0x16 returned 0 after 331 usecs
calling au0828_init+0x0/0xb5 @ 1
au0828 driver loaded
usbcore: registered new interface driver au0828
initcall au0828_init+0x0/0xb5 returned 0 after 2289 usecs
calling smssdio_module_init+0x0/0x28 @ 1
smssdio: Siano SMS1xxx SDIO driver
smssdio: Copyright Pierre Ossman
initcall smssdio_module_init+0x0/0x28 returned 0 after 2140 usecs
calling pps_ktimer_init+0x0/0x92 @ 1
usb 2-1: new high-speed USB device number 2 using dummy_hcd
pps pps0: new PPS source ktimer
pps pps0: ktimer PPS source registered
initcall pps_ktimer_init+0x0/0x92 returned 0 after 3272 usecs
calling pps_tty_init+0x0/0x94 @ 1pps_ldisc: PPS line discipline registered
initcall pps_tty_init+0x0/0x94 returned 0 after 460 usecs
calling pps_gpio_driver_init+0x0/0x11 @ 1
initcall pps_gpio_driver_init+0x0/0x11 returned 0 after 63 usecs
calling pda_power_pdrv_init+0x0/0x11 @ 1
initcall pda_power_pdrv_init+0x0/0x11 returned 0 after 38 usecs
calling wm8350_power_driver_init+0x0/0x11 @ 1
initcall wm8350_power_driver_init+0x0/0x11 returned 0 after 31 usecs
calling pm860x_battery_driver_init+0x0/0x11 @ 1
initcall pm860x_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling goldfish_battery_device_init+0x0/0x11 @ 1
initcall goldfish_battery_device_init+0x0/0x11 returned 0 after 31 usecs
calling sbs_battery_driver_init+0x0/0x11 @ 1
initcall sbs_battery_driver_init+0x0/0x11 returned 0 after 34 usecs
calling bq27x00_battery_init+0x0/0x7 @ 1
initcall bq27x00_battery_init+0x0/0x7 returned 0 after 4 usecs
calling da903x_battery_driver_init+0x0/0x11 @ 1
initcall da903x_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling max17040_i2c_driver_init+0x0/0x11 @ 1
initcall max17040_i2c_driver_init+0x0/0x11 returned 0 after 45 usecs
calling twl4030_madc_battery_driver_init+0x0/0x11 @ 1
initcall twl4030_madc_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling pm860x_charger_driver_init+0x0/0x11 @ 1
initcall pm860x_charger_driver_init+0x0/0x11 returned 0 after 31 usecs
calling pcf50633_mbc_driver_init+0x0/0x11 @ 1
initcall pcf50633_mbc_driver_init+0x0/0x11 returned 0 after 38 usecs
calling rx51_battery_driver_init+0x0/0x11 @ 1
initcall rx51_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling twl4030_bci_driver_init+0x0/0x14 @ 1
initcall twl4030_bci_driver_init+0x0/0x14 returned -19 after 49 usecs
calling lp8727_driver_init+0x0/0x11 @ 1
initcall lp8727_driver_init+0x0/0x11 returned 0 after 29 usecs
calling lp8788_charger_driver_init+0x0/0x11 @ 1
initcall lp8788_charger_driver_init+0x0/0x11 returned 0 after 31 usecs
calling gpio_charger_driver_init+0x0/0x11 @ 1
initcall gpio_charger_driver_init+0x0/0x11 returned 0 after 46 usecs
calling bq2415x_driver_init+0x0/0x11 @ 1
initcall bq2415x_driver_init+0x0/0x11 returned 0 after 29 usecs
calling bq24190_driver_init+0x0/0x11 @ 1
initcall bq24190_driver_init+0x0/0x11 returned 0 after 28 usecs
calling smb347_driver_init+0x0/0x11 @ 1
initcall smb347_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tps65090_charger_driver_init+0x0/0x11 @ 1
initcall tps65090_charger_driver_init+0x0/0x11 returned 0 after 31 usecs
calling asb100_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall asb100_driver_init+0x0/0x11 returned 0 after 6270 usecs
calling sensors_w83627hf_init+0x0/0x12e @ 1
initcall sensors_w83627hf_init+0x0/0x12e returned -19 after 20 usecs
calling w83793_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83793_driver_init+0x0/0x11 returned 0 after 23535 usecs
calling w83795_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!g_ncm gadget: resumedummy_hcd dummy_hcd.0: port status 0x00100503 has changes
i2c i2c-1: Transaction failed (0x10)!
initcall w83795_driver_init+0x0/0x11 returned 0 after 23502 usecs
calling w83791d_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83791d_driver_init+0x0/0x11 returned 0 after 23331 usecs
calling ad7418_driver_init+0x0/0x11 @ 1
initcall ad7418_driver_init+0x0/0x11 returned 0 after 30 usecs
calling adm1021_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!dummy_udc dummy_udc.0: set_address = 2
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!g_ncm gadget: high-speed config #1: CDC Ethernet (NCM)g_ncm gadget: init ncm ctrl 0dummy_udc dummy_udc.0: enabled ep5in-int (ep5in-intr) maxpacket 16 stream disabled g_ncm gadget: notify speed 425984000g_ncm gadget: notify connect false
i2c i2c-1: Transaction failed (0x10)!g_ncm gadget: ncm reqa1.80 v0000 i0000 l28g_ncm gadget: non-CRC mode selectedg_ncm gadget: ncm req21.8a v0000 i0000 l0
i2c i2c-1: Transaction failed (0x10)!g_ncm gadget: NCM16 selectedg_ncm gadget: ncm req21.84 v0000 i0000 l0g_ncm gadget: init ncmg_ncm gadget: activate ncmdummy_udc dummy_udc.0: enabled ep1in-bulk (ep1in-bulk) maxpacket 512 stream disabled dummy_udc dummy_udc.0: enabled ep2out-bulk (ep2out-bulk) maxpacket 512 stream disabled
usb0: qlen 10g_ncm gadget: ncm_close
i2c i2c-1: Transaction failed (0x10)!
usb 2-1: MAC-Address: aa:99:de:d4:76:38cdc_ncm 2-1:1.0 usb1: register 'cdc_ncm' at usb-dummy_hcd.0-1, CDC NCM, aa:99:de:d4:76:38 i2c i2c-1: Transaction failed (0x10)!
initcall adm1021_driver_init+0x0/0x11 returned 0 after 58900 usecs
calling adm1025_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm1025_driver_init+0x0/0x11 returned 0 after 17304 usecs
calling adm1026_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm1026_driver_init+0x0/0x11 returned 0 after 17313 usecs
calling adm1029_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm1029_driver_init+0x0/0x11 returned 0 after 46601 usecs
calling adm9240_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm9240_driver_init+0x0/0x11 returned 0 after 23163 usecs
calling ads1015_driver_init+0x0/0x11 @ 1
initcall ads1015_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ads7828_driver_init+0x0/0x11 @ 1
initcall ads7828_driver_init+0x0/0x11 returned 0 after 28 usecs
calling adt7410_driver_init+0x0/0x11 @ 1
initcall adt7410_driver_init+0x0/0x11 returned 0 after 28 usecs
calling adt7411_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7411_driver_init+0x0/0x11 returned 0 after 18023 usecs
calling adt7462_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7462_driver_init+0x0/0x11 returned 0 after 11450 usecs
calling adt7470_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7470_driver_init+0x0/0x11 returned 0 after 17303 usecs
calling adt7475_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7475_driver_init+0x0/0x11 returned 0 after 17313 usecs
calling applesmc_init+0x0/0x2d @ 1
applesmc: supported laptop not found!
applesmc: driver init failed (ret=-19)!
initcall applesmc_init+0x0/0x2d returned -19 after 1859 usecs
calling sm_asc7621_init+0x0/0x73 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall sm_asc7621_init+0x0/0x73 returned 0 after 17720 usecs
calling atxp1_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall atxp1_driver_init+0x0/0x11 returned 0 after 11487 usecs
calling coretemp_init+0x0/0x183 @ 1
initcall coretemp_init+0x0/0x183 returned -19 after 4 usecs
calling dme1737_init+0x0/0x155 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall dme1737_init+0x0/0x155 returned 0 after 17503 usecs
calling ds620_driver_init+0x0/0x11 @ 1
initcall ds620_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ds1621_driver_init+0x0/0x11 @ 1
initcall ds1621_driver_init+0x0/0x11 returned 0 after 29 usecs
calling emc2103_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall emc2103_driver_init+0x0/0x11 returned 0 after 6152 usecs
calling f71882fg_init+0x0/0x114 @ 1
initcall f71882fg_init+0x0/0x114 returned -19 after 31 usecs
calling f75375_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall f75375_driver_init+0x0/0x11 returned 0 after 12401 usecs
calling fam15h_power_driver_init+0x0/0x16 @ 1
initcall fam15h_power_driver_init+0x0/0x16 returned 0 after 61 usecs
calling fschmd_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall fschmd_driver_init+0x0/0x11 returned 0 after 6430 usecs
calling g760a_driver_init+0x0/0x11 @ 1
initcall g760a_driver_init+0x0/0x11 returned 0 after 30 usecs
calling gl520_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall gl520_driver_init+0x0/0x11 returned 0 after 12063 usecs
calling hih6130_driver_init+0x0/0x11 @ 1
initcall hih6130_driver_init+0x0/0x11 returned 0 after 30 usecs
calling htu21_driver_init+0x0/0x11 @ 1
initcall htu21_driver_init+0x0/0x11 returned 0 after 28 usecs
calling i5k_amb_init+0x0/0x56 @ 1
initcall i5k_amb_init+0x0/0x56 returned 0 after 201 usecs
calling aem_init+0x0/0x43 @ 1
initcall aem_init+0x0/0x43 returned 0 after 32 usecs
calling iio_hwmon_driver_init+0x0/0x11 @ 1
initcall iio_hwmon_driver_init+0x0/0x11 returned 0 after 32 usecs
calling ina2xx_driver_init+0x0/0x11 @ 1
initcall ina2xx_driver_init+0x0/0x11 returned 0 after 37 usecs
calling sm_it87_init+0x0/0x5ab @ 1
it87: Found IT8712F chip at 0x290, revision 7
it87: VID is disabled (pins used for GPIO)
it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
initcall sm_it87_init+0x0/0x5ab returned 0 after 3399 usecs
calling k10temp_driver_init+0x0/0x16 @ 1
initcall k10temp_driver_init+0x0/0x16 returned 0 after 47 usecs
calling pem_driver_init+0x0/0x11 @ 1
initcall pem_driver_init+0x0/0x11 returned 0 after 31 usecs
calling lm63_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm63_driver_init+0x0/0x11 returned 0 after 17458 usecs
calling lm73_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm73_driver_init+0x0/0x11 returned 0 after 34924 usecs
calling lm77_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm77_driver_init+0x0/0x11 returned 0 after 23204 usecs
calling sm_lm78_init+0x0/0x393 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall sm_lm78_init+0x0/0x393 returned 0 after 47151 usecs
calling lm80_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm80_driver_init+0x0/0x11 returned 0 after 47142 usecs
calling lm95234_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm95234_driver_init+0x0/0x11 returned 0 after 17820 usecs
calling ltc4245_driver_init+0x0/0x11 @ 1
initcall ltc4245_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max16065_driver_init+0x0/0x11 @ 1
initcall max16065_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max1619_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max1619_driver_init+0x0/0x11 returned 0 after 52588 usecs
calling max1668_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max1668_driver_init+0x0/0x11 returned 0 after 52461 usecs
calling max197_driver_init+0x0/0x11 @ 1
initcall max197_driver_init+0x0/0x11 returned 0 after 36 usecs
calling max6639_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max6639_driver_init+0x0/0x11 returned 0 after 17888 usecs
calling max6642_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max6642_driver_init+0x0/0x11 returned 0 after 46603 usecs
calling sensors_nct6775_init+0x0/0x323 @ 1
initcall sensors_nct6775_init+0x0/0x323 returned -19 after 90 usecs
calling ntc_thermistor_driver_init+0x0/0x11 @ 1
initcall ntc_thermistor_driver_init+0x0/0x11 returned 0 after 32 usecs
calling pc87360_init+0x0/0x16f @ 1
pc87360: PC8736x not detected, module not inserted
initcall pc87360_init+0x0/0x16f returned -19 after 1006 usecs
calling pcf8591_init+0x0/0x38 @ 1
initcall pcf8591_init+0x0/0x38 returned 0 after 31 usecs
calling sht15_driver_init+0x0/0x11 @ 1
initcall sht15_driver_init+0x0/0x11 returned 0 after 34 usecs
calling sm_sis5595_init+0x0/0x16 @ 1
initcall sm_sis5595_init+0x0/0x16 returned 0 after 39 usecs
calling smm665_driver_init+0x0/0x11 @ 1
initcall smm665_driver_init+0x0/0x11 returned 0 after 31 usecs
calling smsc47b397_init+0x0/0x167 @ 1
initcall smsc47b397_init+0x0/0x167 returned -19 after 9 usecs
calling sm_smsc47m1_init+0x0/0x244 @ 1
initcall sm_smsc47m1_init+0x0/0x244 returned -19 after 9 usecs
calling thmc50_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall thmc50_driver_init+0x0/0x11 returned 0 after 17778 usecs
calling tmp102_driver_init+0x0/0x11 @ 1
initcall tmp102_driver_init+0x0/0x11 returned 0 after 37 usecs
calling via_cputemp_init+0x0/0x12d @ 1
initcall via_cputemp_init+0x0/0x12d returned -19 after 4 usecs
calling vt1211_init+0x0/0x155 @ 1
initcall vt1211_init+0x0/0x155 returned -19 after 20 usecs
calling sm_vt8231_init+0x0/0x16 @ 1
initcall sm_vt8231_init+0x0/0x16 returned 0 after 38 usecs
calling sensors_w83627ehf_init+0x0/0x130 @ 1
initcall sensors_w83627ehf_init+0x0/0x130 returned -19 after 34 usecs
calling w83l785ts_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83l785ts_driver_init+0x0/0x11 returned 0 after 5585 usecs
calling w83l786ng_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83l786ng_driver_init+0x0/0x11 returned 0 after 11919 usecs
calling wm831x_hwmon_driver_init+0x0/0x11 @ 1
initcall wm831x_hwmon_driver_init+0x0/0x11 returned 0 after 41 usecs
calling wm8350_hwmon_driver_init+0x0/0x11 @ 1
initcall wm8350_hwmon_driver_init+0x0/0x11 returned 0 after 32 usecs
calling pmbus_driver_init+0x0/0x11 @ 1
initcall pmbus_driver_init+0x0/0x11 returned 0 after 31 usecs
calling adm1275_driver_init+0x0/0x11 @ 1
initcall adm1275_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ltc2978_driver_init+0x0/0x11 @ 1
initcall ltc2978_driver_init+0x0/0x11 returned 0 after 31 usecs
calling max16064_driver_init+0x0/0x11 @ 1
initcall max16064_driver_init+0x0/0x11 returned 0 after 36 usecs
calling max34440_driver_init+0x0/0x11 @ 1
initcall max34440_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max8688_driver_init+0x0/0x11 @ 1
initcall max8688_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ucd9200_driver_init+0x0/0x11 @ 1
initcall ucd9200_driver_init+0x0/0x11 returned 0 after 29 usecs
calling zl6100_driver_init+0x0/0x11 @ 1
initcall zl6100_driver_init+0x0/0x11 returned 0 after 30 usecs
calling pkg_temp_thermal_init+0x0/0x4d6 @ 1
initcall pkg_temp_thermal_init+0x0/0x4d6 returned -19 after 4 usecs
calling vhci_init+0x0/0x26 @ 1
Bluetooth: Virtual HCI driver ver 1.3
initcall vhci_init+0x0/0x26 returned 0 after 1846 usecs
calling bfusb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver bfusb
initcall bfusb_driver_init+0x0/0x16 returned 0 after 1308 usecs
calling dtl1_driver_init+0x0/0xf @ 1
initcall dtl1_driver_init+0x0/0xf returned 0 after 38 usecs
calling bt3c_driver_init+0x0/0xf @ 1
initcall bt3c_driver_init+0x0/0xf returned 0 after 26 usecs
calling btuart_driver_init+0x0/0xf @ 1
initcall btuart_driver_init+0x0/0xf returned 0 after 26 usecs
calling btsdio_init+0x0/0x26 @ 1
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
initcall btsdio_init+0x0/0x26 returned 0 after 690 usecs
calling btwilink_driver_init+0x0/0x11 @ 1
initcall btwilink_driver_init+0x0/0x11 returned 0 after 35 usecs
calling mmc_blk_init+0x0/0x6d @ 1
initcall mmc_blk_init+0x0/0x6d returned 0 after 27 usecs
calling mmc_test_init+0x0/0xf @ 1
initcall mmc_test_init+0x0/0xf returned 0 after 40 usecs
calling sdio_uart_init+0x0/0xc9 @ 1
initcall sdio_uart_init+0x0/0xc9 returned 0 after 43 usecs
calling sdhci_drv_init+0x0/0x20 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x20 returned 0 after 1767 usecs
calling sdhci_driver_init+0x0/0x16 @ 1
initcall sdhci_driver_init+0x0/0x16 returned 0 after 55 usecs
calling goldfish_mmc_driver_init+0x0/0x11 @ 1
initcall goldfish_mmc_driver_init+0x0/0x11 returned 0 after 32 usecs
calling sdricoh_driver_init+0x0/0xf @ 1
initcall sdricoh_driver_init+0x0/0xf returned 0 after 27 usecs
calling ushc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ushc
initcall ushc_driver_init+0x0/0x16 returned 0 after 1138 usecs
calling rtsx_pci_sdmmc_driver_init+0x0/0x11 @ 1
initcall rtsx_pci_sdmmc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling sdhci_pltfm_drv_init+0x0/0x14 @ 1
sdhci-pltfm: SDHCI platform and OF driver helper
initcall sdhci_pltfm_drv_init+0x0/0x14 returned 0 after 1645 usecs
calling memstick_init+0x0/0x8c @ 1
initcall memstick_init+0x0/0x8c returned 0 after 141 usecs
calling msb_init+0x0/0x66 @ 1
initcall msb_init+0x0/0x66 returned 0 after 25 usecs
calling tifm_ms_init+0x0/0xf @ 1
initcall tifm_ms_init+0x0/0xf returned 0 after 25 usecs
calling jmb38x_ms_driver_init+0x0/0x16 @ 1
initcall jmb38x_ms_driver_init+0x0/0x16 returned 0 after 46 usecs
calling r852_pci_driver_init+0x0/0x16 @ 1
initcall r852_pci_driver_init+0x0/0x16 returned 0 after 45 usecs
calling rtsx_pci_ms_driver_init+0x0/0x11 @ 1
initcall rtsx_pci_ms_driver_init+0x0/0x11 returned 0 after 33 usecs
calling lm3533_led_driver_init+0x0/0x11 @ 1
initcall lm3533_led_driver_init+0x0/0x11 returned 0 after 31 usecs
calling lm3642_i2c_driver_init+0x0/0x11 @ 1
initcall lm3642_i2c_driver_init+0x0/0x11 returned 0 after 33 usecs
calling pca9532_driver_init+0x0/0x11 @ 1
initcall pca9532_driver_init+0x0/0x11 returned 0 after 31 usecs
calling gpio_led_driver_init+0x0/0x11 @ 1
initcall gpio_led_driver_init+0x0/0x11 returned 0 after 32 usecs
calling lp5523_driver_init+0x0/0x11 @ 1
initcall lp5523_driver_init+0x0/0x11 returned 0 after 30 usecs
calling lp8501_driver_init+0x0/0x11 @ 1
initcall lp8501_driver_init+0x0/0x11 returned 0 after 36 usecs
calling tca6507_driver_init+0x0/0x11 @ 1
initcall tca6507_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ot200_led_driver_init+0x0/0x11 @ 1
initcall ot200_led_driver_init+0x0/0x11 returned 0 after 32 usecs
calling pca963x_driver_init+0x0/0x11 @ 1
initcall pca963x_driver_init+0x0/0x11 returned 0 after 31 usecs
calling da903x_led_driver_init+0x0/0x11 @ 1
initcall da903x_led_driver_init+0x0/0x11 returned 0 after 33 usecs
calling wm8350_led_driver_init+0x0/0x11 @ 1
initcall wm8350_led_driver_init+0x0/0x11 returned 0 after 33 usecs
calling led_pwm_driver_init+0x0/0x11 @ 1
initcall led_pwm_driver_init+0x0/0x11 returned 0 after 31 usecs
calling regulator_led_driver_init+0x0/0x11 @ 1
initcall regulator_led_driver_init+0x0/0x11 returned 0 after 91 usecs
calling lt3593_led_driver_init+0x0/0x11 @ 1
initcall lt3593_led_driver_init+0x0/0x11 returned 0 after 50 usecs
calling lm355x_i2c_driver_init+0x0/0x11 @ 1
initcall lm355x_i2c_driver_init+0x0/0x11 returned 0 after 46 usecs
calling blinkm_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall blinkm_driver_init+0x0/0x11 returned 0 after 5914 usecs
calling timer_trig_init+0x0/0xf @ 1
initcall timer_trig_init+0x0/0xf returned 0 after 45 usecs
calling heartbeat_trig_init+0x0/0x32 @ 1
initcall heartbeat_trig_init+0x0/0x32 returned 0 after 6 usecs
calling bl_trig_init+0x0/0xf @ 1
initcall bl_trig_init+0x0/0xf returned 0 after 4 usecs
calling gpio_trig_init+0x0/0xf @ 1
initcall gpio_trig_init+0x0/0xf returned 0 after 4 usecs
calling ledtrig_cpu_init+0x0/0x53 @ 1
ledtrig-cpu: registered to indicate activity on CPUs
initcall ledtrig_cpu_init+0x0/0x53 returned 0 after 369 usecs
calling transient_trig_init+0x0/0xf @ 1
initcall transient_trig_init+0x0/0xf returned 0 after 4 usecs
calling ledtrig_camera_init+0x0/0x25 @ 1
initcall ledtrig_camera_init+0x0/0x25 returned 0 after 5 usecs
calling ib_core_init+0x0/0xa8 @ 1
initcall ib_core_init+0x0/0xa8 returned 0 after 71 usecs
calling ib_mad_init_module+0x0/0xca @ 1
initcall ib_mad_init_module+0x0/0xca returned 0 after 42 usecs
calling ib_sa_init+0x0/0x59 @ 1
initcall ib_sa_init+0x0/0x59 returned 0 after 80 usecs
calling ib_cm_init+0x0/0x152 @ 1
initcall ib_cm_init+0x0/0x152 returned 0 after 94 usecs
calling iw_cm_init+0x0/0x49 @ 1
initcall iw_cm_init+0x0/0x49 returned 0 after 58 usecs
calling addr_init+0x0/0x58 @ 1
initcall addr_init+0x0/0x58 returned 0 after 76 usecs
calling cma_init+0x0/0xcf @ 1
initcall cma_init+0x0/0xcf returned 0 after 98 usecs
calling mthca_init+0x0/0x15f @ 1
initcall mthca_init+0x0/0x15f returned 0 after 113 usecs
calling c2_pci_driver_init+0x0/0x16 @ 1
initcall c2_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling mlx4_ib_init+0x0/0x7d @ 1
initcall mlx4_ib_init+0x0/0x7d returned 0 after 116 usecs
calling mlx5_ib_init+0x0/0x16 @ 1
initcall mlx5_ib_init+0x0/0x16 returned 0 after 39 usecs
calling nes_init_module+0x0/0x100 @ 1
initcall nes_init_module+0x0/0x100 returned 0 after 172 usecs
calling ipoib_init_module+0x0/0x122 @ 1
initcall ipoib_init_module+0x0/0x122 returned 0 after 83 usecs
calling srp_init_module+0x0/0x12b @ 1
initcall srp_init_module+0x0/0x12b returned 0 after 33 usecs
calling isert_init+0x0/0xd4 @ 1
initcall isert_init+0x0/0xd4 returned 0 after 26 usecs
calling dcdbas_init+0x0/0x57 @ 1
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
initcall dcdbas_init+0x0/0x57 returned 0 after 562 usecs
calling cs5535_mfgpt_init+0x0/0x107 @ 1
cs5535-clockevt: Could not allocate MFGPT timer
initcall cs5535_mfgpt_init+0x0/0x107 returned -19 after 1488 usecs
calling hid_init+0x0/0x43 @ 1
initcall hid_init+0x0/0x43 returned 0 after 56 usecs
calling apple_driver_init+0x0/0x16 @ 1
initcall apple_driver_init+0x0/0x16 returned 0 after 32 usecs
calling appleir_driver_init+0x0/0x16 @ 1
initcall appleir_driver_init+0x0/0x16 returned 0 after 24 usecs
calling aureal_driver_init+0x0/0x16 @ 1
initcall aureal_driver_init+0x0/0x16 returned 0 after 24 usecs
calling belkin_driver_init+0x0/0x16 @ 1
initcall belkin_driver_init+0x0/0x16 returned 0 after 24 usecs
calling ch_driver_init+0x0/0x16 @ 1
initcall ch_driver_init+0x0/0x16 returned 0 after 37 usecs
calling ch_driver_init+0x0/0x16 @ 1
initcall ch_driver_init+0x0/0x16 returned 0 after 31 usecs
calling cp_driver_init+0x0/0x16 @ 1
initcall cp_driver_init+0x0/0x16 returned 0 after 24 usecs
calling dr_driver_init+0x0/0x16 @ 1
initcall dr_driver_init+0x0/0x16 returned 0 after 31 usecs
calling ems_driver_init+0x0/0x16 @ 1
initcall ems_driver_init+0x0/0x16 returned 0 after 24 usecs
calling elecom_driver_init+0x0/0x16 @ 1
initcall elecom_driver_init+0x0/0x16 returned 0 after 33 usecs
calling elo_driver_init+0x0/0x74 @ 1
initcall elo_driver_init+0x0/0x74 returned 0 after 85 usecs
calling ez_driver_init+0x0/0x16 @ 1
initcall ez_driver_init+0x0/0x16 returned 0 after 24 usecs
calling gyration_driver_init+0x0/0x16 @ 1
initcall gyration_driver_init+0x0/0x16 returned 0 after 24 usecs
calling holtek_kbd_driver_init+0x0/0x16 @ 1
initcall holtek_kbd_driver_init+0x0/0x16 returned 0 after 24 usecs
calling holtek_mouse_driver_init+0x0/0x16 @ 1
initcall holtek_mouse_driver_init+0x0/0x16 returned 0 after 26 usecs
calling holtek_driver_init+0x0/0x16 @ 1
initcall holtek_driver_init+0x0/0x16 returned 0 after 31 usecs
calling huion_driver_init+0x0/0x16 @ 1
initcall huion_driver_init+0x0/0x16 returned 0 after 24 usecs
calling ks_driver_init+0x0/0x16 @ 1
initcall ks_driver_init+0x0/0x16 returned 0 after 24 usecs
calling keytouch_driver_init+0x0/0x16 @ 1
initcall keytouch_driver_init+0x0/0x16 returned 0 after 25 usecs
calling kye_driver_init+0x0/0x16 @ 1
initcall kye_driver_init+0x0/0x16 returned 0 after 24 usecs
calling magicmouse_driver_init+0x0/0x16 @ 1
initcall magicmouse_driver_init+0x0/0x16 returned 0 after 24 usecs
calling ms_driver_init+0x0/0x16 @ 1
initcall ms_driver_init+0x0/0x16 returned 0 after 25 usecs
calling ntrig_driver_init+0x0/0x16 @ 1
initcall ntrig_driver_init+0x0/0x16 returned 0 after 48 usecs
calling ortek_driver_init+0x0/0x16 @ 1
initcall ortek_driver_init+0x0/0x16 returned 0 after 24 usecs
calling pl_driver_init+0x0/0x16 @ 1
initcall pl_driver_init+0x0/0x16 returned 0 after 24 usecs
calling pl_driver_init+0x0/0x16 @ 1
initcall pl_driver_init+0x0/0x16 returned 0 after 25 usecs
calling picolcd_driver_init+0x0/0x16 @ 1
initcall picolcd_driver_init+0x0/0x16 returned 0 after 25 usecs
calling px_driver_init+0x0/0x16 @ 1
initcall px_driver_init+0x0/0x16 returned 0 after 24 usecs
calling roccat_init+0x0/0x87 @ 1
initcall roccat_init+0x0/0x87 returned 0 after 7 usecs
calling arvo_init+0x0/0x50 @ 1
initcall arvo_init+0x0/0x50 returned 0 after 47 usecs
calling isku_init+0x0/0x50 @ 1
initcall isku_init+0x0/0x50 returned 0 after 53 usecs
calling kone_init+0x0/0x50 @ 1
initcall kone_init+0x0/0x50 returned 0 after 45 usecs
calling koneplus_init+0x0/0x50 @ 1
initcall koneplus_init+0x0/0x50 returned 0 after 53 usecs
calling konepure_init+0x0/0x50 @ 1
initcall konepure_init+0x0/0x50 returned 0 after 46 usecs
calling kovaplus_init+0x0/0x50 @ 1
initcall kovaplus_init+0x0/0x50 returned 0 after 46 usecs
calling lua_driver_init+0x0/0x16 @ 1
initcall lua_driver_init+0x0/0x16 returned 0 after 24 usecs
calling pyra_init+0x0/0x50 @ 1
initcall pyra_init+0x0/0x50 returned 0 after 59 usecs
calling savu_init+0x0/0x50 @ 1
initcall savu_init+0x0/0x50 returned 0 after 45 usecs
calling saitek_driver_init+0x0/0x16 @ 1
initcall saitek_driver_init+0x0/0x16 returned 0 after 24 usecs
calling samsung_driver_init+0x0/0x16 @ 1
initcall samsung_driver_init+0x0/0x16 returned 0 after 25 usecs
calling sony_driver_init+0x0/0x16 @ 1
initcall sony_driver_init+0x0/0x16 returned 0 after 24 usecs
calling speedlink_driver_init+0x0/0x16 @ 1
initcall speedlink_driver_init+0x0/0x16 returned 0 after 24 usecs
calling steelseries_srws1_driver_init+0x0/0x16 @ 1
initcall steelseries_srws1_driver_init+0x0/0x16 returned 0 after 25 usecs
calling sp_driver_init+0x0/0x16 @ 1
initcall sp_driver_init+0x0/0x16 returned 0 after 25 usecs
calling ga_driver_init+0x0/0x16 @ 1
initcall ga_driver_init+0x0/0x16 returned 0 after 31 usecs
calling thingm_driver_init+0x0/0x16 @ 1
initcall thingm_driver_init+0x0/0x16 returned 0 after 24 usecs
calling tm_driver_init+0x0/0x16 @ 1
initcall tm_driver_init+0x0/0x16 returned 0 after 25 usecs
calling tivo_driver_init+0x0/0x16 @ 1
initcall tivo_driver_init+0x0/0x16 returned 0 after 25 usecs
calling twinhan_driver_init+0x0/0x16 @ 1
initcall twinhan_driver_init+0x0/0x16 returned 0 after 24 usecs
calling uclogic_driver_init+0x0/0x16 @ 1
initcall uclogic_driver_init+0x0/0x16 returned 0 after 24 usecs
calling xinmo_driver_init+0x0/0x16 @ 1
initcall xinmo_driver_init+0x0/0x16 returned 0 after 25 usecs
calling zp_driver_init+0x0/0x16 @ 1
initcall zp_driver_init+0x0/0x16 returned 0 after 40 usecs
calling zc_driver_init+0x0/0x16 @ 1
initcall zc_driver_init+0x0/0x16 returned 0 after 26 usecs
calling waltop_driver_init+0x0/0x16 @ 1
initcall waltop_driver_init+0x0/0x16 returned 0 after 24 usecs
calling wiimote_hid_driver_init+0x0/0x16 @ 1
initcall wiimote_hid_driver_init+0x0/0x16 returned 0 after 25 usecs
calling sensor_hub_driver_init+0x0/0x16 @ 1
initcall sensor_hub_driver_init+0x0/0x16 returned 0 after 25 usecs
calling hid_init+0x0/0x45 @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x45 returned 0 after 1520 usecs
calling vhost_net_init+0x0/0x20 @ 1
initcall vhost_net_init+0x0/0x20 returned 0 after 99 usecs
calling vhost_init+0x0/0x7 @ 1
initcall vhost_init+0x0/0x7 returned 0 after 4 usecs
calling hdaps_init+0x0/0x2d @ 1
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
initcall hdaps_init+0x0/0x2d returned -19 after 2795 usecs
calling goldfish_pdev_bus_driver_init+0x0/0x11 @ 1goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
initcall goldfish_pdev_bus_driver_init+0x0/0x11 returned 0 after 2272 usecs
calling hid_accel_3d_platform_driver_init+0x0/0x11 @ 1
initcall hid_accel_3d_platform_driver_init+0x0/0x11 returned 0 after 32 usecs
calling st_accel_driver_init+0x0/0x11 @ 1
initcall st_accel_driver_init+0x0/0x11 returned 0 after 45 usecs
calling exynos_adc_driver_init+0x0/0x11 @ 1
initcall exynos_adc_driver_init+0x0/0x11 returned 0 after 48 usecs
calling lp8788_adc_driver_init+0x0/0x11 @ 1
initcall lp8788_adc_driver_init+0x0/0x11 returned 0 after 32 usecs
calling max1363_driver_init+0x0/0x11 @ 1
initcall max1363_driver_init+0x0/0x11 returned 0 after 32 usecs
calling tiadc_driver_init+0x0/0x11 @ 1
initcall tiadc_driver_init+0x0/0x11 returned 0 after 32 usecs
calling twl6030_gpadc_driver_init+0x0/0x11 @ 1
initcall twl6030_gpadc_driver_init+0x0/0x11 returned 0 after 33 usecs
calling vprbrd_adc_driver_init+0x0/0x11 @ 1
initcall vprbrd_adc_driver_init+0x0/0x11 returned 0 after 45 usecs
calling ad5380_spi_init+0x0/0x11 @ 1
initcall ad5380_spi_init+0x0/0x11 returned 0 after 31 usecs
calling ad5446_init+0x0/0x11 @ 1
initcall ad5446_init+0x0/0x11 returned 0 after 30 usecs
calling mcp4725_driver_init+0x0/0x11 @ 1
initcall mcp4725_driver_init+0x0/0x11 returned 0 after 29 usecs
calling hid_gyro_3d_platform_driver_init+0x0/0x11 @ 1
initcall hid_gyro_3d_platform_driver_init+0x0/0x11 returned 0 after 34 usecs
calling itg3200_driver_init+0x0/0x11 @ 1
initcall itg3200_driver_init+0x0/0x11 returned 0 after 31 usecs
calling st_gyro_driver_init+0x0/0x11 @ 1
initcall st_gyro_driver_init+0x0/0x11 returned 0 after 29 usecs
calling inv_mpu_driver_init+0x0/0x11 @ 1
initcall inv_mpu_driver_init+0x0/0x11 returned 0 after 29 usecs
calling adjd_s311_driver_init+0x0/0x11 @ 1
initcall adjd_s311_driver_init+0x0/0x11 returned 0 after 29 usecs
calling apds9300_driver_init+0x0/0x11 @ 1
initcall apds9300_driver_init+0x0/0x11 returned 0 after 36 usecs
calling hid_als_platform_driver_init+0x0/0x11 @ 1
initcall hid_als_platform_driver_init+0x0/0x11 returned 0 after 33 usecs
calling vcnl4000_driver_init+0x0/0x11 @ 1
initcall vcnl4000_driver_init+0x0/0x11 returned 0 after 30 usecs
calling hid_magn_3d_platform_driver_init+0x0/0x11 @ 1
initcall hid_magn_3d_platform_driver_init+0x0/0x11 returned 0 after 32 usecs
calling st_magn_driver_init+0x0/0x11 @ 1
initcall st_magn_driver_init+0x0/0x11 returned 0 after 50 usecs
calling st_press_driver_init+0x0/0x11 @ 1
initcall st_press_driver_init+0x0/0x11 returned 0 after 29 usecs
calling iio_sysfs_trig_init+0x0/0x30 @ 1
initcall iio_sysfs_trig_init+0x0/0x30 returned 0 after 92 usecs
calling vme_init+0x0/0xf @ 1
initcall vme_init+0x0/0xf returned 0 after 42 usecs
calling ca91cx42_driver_init+0x0/0x16 @ 1
initcall ca91cx42_driver_init+0x0/0x16 returned 0 after 61 usecs
calling tsi148_driver_init+0x0/0x16 @ 1
initcall tsi148_driver_init+0x0/0x16 returned 0 after 38 usecs
calling ipack_init+0x0/0x19 @ 1
initcall ipack_init+0x0/0x19 returned 0 after 35 usecs
calling tpci200_pci_drv_init+0x0/0x16 @ 1
initcall tpci200_pci_drv_init+0x0/0x16 returned 0 after 36 usecs
calling fmc_init+0x0/0xf @ 1
initcall fmc_init+0x0/0xf returned 0 after 35 usecs
calling t_init+0x0/0x12 @ 1
initcall t_init+0x0/0x12 returned 0 after 23 usecs
calling fwe_init+0x0/0xf @ 1
initcall fwe_init+0x0/0xf returned 0 after 31 usecs
calling fc_init+0x0/0xf @ 1
initcall fc_init+0x0/0xf returned 0 after 23 usecs
calling sock_diag_init+0x0/0xf @ 1
initcall sock_diag_init+0x0/0xf returned 0 after 27 usecs
calling flow_cache_init_global+0x0/0x10f @ 1
initcall flow_cache_init_global+0x0/0x10f returned 0 after 45 usecs
calling llc_init+0x0/0x1b @ 1
initcall llc_init+0x0/0x1b returned 0 after 4 usecs
calling llc2_init+0x0/0xbd @ 1
NET: Registered protocol family 26
initcall llc2_init+0x0/0xbd returned 0 after 1230 usecs
calling snap_init+0x0/0x33 @ 1
initcall snap_init+0x0/0x33 returned 0 after 28 usecs
calling netlink_diag_init+0x0/0xf @ 1
initcall netlink_diag_init+0x0/0xf returned 0 after 18 usecs
calling nfnetlink_init+0x0/0x49 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x49 returned 0 after 779 usecs
calling nfnl_acct_init+0x0/0x37 @ 1nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x37 returned 0 after 943 usecs
calling nfnetlink_queue_init+0x0/0x7b @ 1
initcall nfnetlink_queue_init+0x0/0x7b returned 0 after 27 usecs
calling nfnetlink_log_init+0x0/0x9c @ 1
initcall nfnetlink_log_init+0x0/0x9c returned 0 after 40 usecs
calling nf_conntrack_standalone_init+0x0/0x6e @ 1nf_conntrack version 0.5.0 (15637 buckets, 62548 max)
initcall nf_conntrack_standalone_init+0x0/0x6e returned 0 after 745 usecs
calling nf_conntrack_proto_sctp_init+0x0/0x51 @ 1
initcall nf_conntrack_proto_sctp_init+0x0/0x51 returned 0 after 57 usecs
calling ctnetlink_init+0x0/0x92 @ 1
ctnetlink v0.93: registering with nfnetlink.
initcall ctnetlink_init+0x0/0x92 returned 0 after 984 usecs
calling nf_conntrack_amanda_init+0x0/0x90 @ 1
initcall nf_conntrack_amanda_init+0x0/0x90 returned 0 after 22 usecs
calling nf_conntrack_ftp_init+0x0/0x1bc @ 1
initcall nf_conntrack_ftp_init+0x0/0x1bc returned 0 after 87 usecs
calling nf_conntrack_h323_init+0x0/0xe0 @ 1
initcall nf_conntrack_h323_init+0x0/0xe0 returned 0 after 86 usecs
calling nf_conntrack_irc_init+0x0/0x155 @ 1
initcall nf_conntrack_irc_init+0x0/0x155 returned 0 after 86 usecs
calling nf_conntrack_snmp_init+0x0/0x19 @ 1
initcall nf_conntrack_snmp_init+0x0/0x19 returned 0 after 4 usecs
calling nf_conntrack_sane_init+0x0/0x1b6 @ 1
initcall nf_conntrack_sane_init+0x0/0x1b6 returned 0 after 85 usecs
calling nf_conntrack_sip_init+0x0/0x1e1 @ 1
initcall nf_conntrack_sip_init+0x0/0x1e1 returned 0 after 5 usecs
calling synproxy_core_init+0x0/0x37 @ 1
initcall synproxy_core_init+0x0/0x37 returned 0 after 31 usecs
calling xt_init+0x0/0x8d @ 1
initcall xt_init+0x0/0x8d returned 0 after 13 usecs
calling tcpudp_mt_init+0x0/0x14 @ 1
initcall tcpudp_mt_init+0x0/0x14 returned 0 after 28 usecs
calling mark_mt_init+0x0/0x37 @ 1
initcall mark_mt_init+0x0/0x37 returned 0 after 4 usecs
calling connmark_mt_init+0x0/0x37 @ 1
initcall connmark_mt_init+0x0/0x37 returned 0 after 4 usecs
calling audit_tg_init+0x0/0x14 @ 1
initcall audit_tg_init+0x0/0x14 returned 0 after 4 usecs
calling checksum_tg_init+0x0/0xf @ 1
initcall checksum_tg_init+0x0/0xf returned 0 after 4 usecs
calling classify_tg_init+0x0/0x14 @ 1
initcall classify_tg_init+0x0/0x14 returned 0 after 4 usecs
calling xt_ct_tg_init+0x0/0x3c @ 1
initcall xt_ct_tg_init+0x0/0x3c returned 0 after 4 usecs
calling dscp_tg_init+0x0/0x14 @ 1
initcall dscp_tg_init+0x0/0x14 returned 0 after 4 usecs
calling hl_tg_init+0x0/0x14 @ 1
initcall hl_tg_init+0x0/0x14 returned 0 after 4 usecs
calling hmark_tg_init+0x0/0x14 @ 1
initcall hmark_tg_init+0x0/0x14 returned 0 after 4 usecs
calling led_tg_init+0x0/0xf @ 1
initcall led_tg_init+0x0/0xf returned 0 after 4 usecs
calling log_tg_init+0x0/0x5a @ 1
initcall log_tg_init+0x0/0x5a returned 0 after 6 usecs
calling nflog_tg_init+0x0/0xf @ 1
initcall nflog_tg_init+0x0/0xf returned 0 after 4 usecs
calling nfqueue_tg_init+0x0/0x14 @ 1
initcall nfqueue_tg_init+0x0/0x14 returned 0 after 4 usecs
calling xt_rateest_tg_init+0x0/0x22 @ 1
initcall xt_rateest_tg_init+0x0/0x22 returned 0 after 4 usecs
calling secmark_tg_init+0x0/0xf @ 1
initcall secmark_tg_init+0x0/0xf returned 0 after 4 usecs
calling tproxy_tg_init+0x0/0x1e @ 1
initcall tproxy_tg_init+0x0/0x1e returned 0 after 4 usecs
calling tcpmss_tg_init+0x0/0x14 @ 1
initcall tcpmss_tg_init+0x0/0x14 returned 0 after 4 usecs
calling tcpoptstrip_tg_init+0x0/0x14 @ 1
initcall tcpoptstrip_tg_init+0x0/0x14 returned 0 after 4 usecs
calling tee_tg_init+0x0/0x14 @ 1
initcall tee_tg_init+0x0/0x14 returned 0 after 4 usecs
calling trace_tg_init+0x0/0xf @ 1
initcall trace_tg_init+0x0/0xf returned 0 after 4 usecs
calling idletimer_tg_init+0x0/0xfb @ 1
initcall idletimer_tg_init+0x0/0xfb returned 0 after 111 usecs
calling xt_cluster_mt_init+0x0/0xf @ 1
initcall xt_cluster_mt_init+0x0/0xf returned 0 after 4 usecs
calling connbytes_mt_init+0x0/0xf @ 1
initcall connbytes_mt_init+0x0/0xf returned 0 after 4 usecs
calling connlabel_mt_init+0x0/0xf @ 1
initcall connlabel_mt_init+0x0/0xf returned 0 after 4 usecs
calling connlimit_mt_init+0x0/0xf @ 1
initcall connlimit_mt_init+0x0/0xf returned 0 after 4 usecs
calling conntrack_mt_init+0x0/0x14 @ 1
initcall conntrack_mt_init+0x0/0x14 returned 0 after 4 usecs
calling ecn_mt_init+0x0/0x14 @ 1
initcall ecn_mt_init+0x0/0x14 returned 0 after 4 usecs
calling hashlimit_mt_init+0x0/0x88 @ 1
initcall hashlimit_mt_init+0x0/0x88 returned 0 after 76 usecs
calling helper_mt_init+0x0/0xf @ 1
initcall helper_mt_init+0x0/0xf returned 0 after 4 usecs
calling hl_mt_init+0x0/0x14 @ 1
initcall hl_mt_init+0x0/0x14 returned 0 after 4 usecs
calling iprange_mt_init+0x0/0x14 @ 1
initcall iprange_mt_init+0x0/0x14 returned 0 after 4 usecs
calling ipvs_mt_init+0x0/0xf @ 1
initcall ipvs_mt_init+0x0/0xf returned 0 after 4 usecs
calling limit_mt_init+0x0/0xf @ 1
initcall limit_mt_init+0x0/0xf returned 0 after 4 usecs
calling multiport_mt_init+0x0/0x14 @ 1
initcall multiport_mt_init+0x0/0x14 returned 0 after 4 usecs
calling nfacct_mt_init+0x0/0xf @ 1
initcall nfacct_mt_init+0x0/0xf returned 0 after 4 usecs
calling owner_mt_init+0x0/0xf @ 1
initcall owner_mt_init+0x0/0xf returned 0 after 4 usecs
calling pkttype_mt_init+0x0/0xf @ 1
initcall pkttype_mt_init+0x0/0xf returned 0 after 4 usecs
calling quota_mt_init+0x0/0xf @ 1
initcall quota_mt_init+0x0/0xf returned 0 after 4 usecs
calling xt_rateest_mt_init+0x0/0xf @ 1
initcall xt_rateest_mt_init+0x0/0xf returned 0 after 4 usecs
calling realm_mt_init+0x0/0xf @ 1
initcall realm_mt_init+0x0/0xf returned 0 after 4 usecs
calling string_mt_init+0x0/0xf @ 1
initcall string_mt_init+0x0/0xf returned 0 after 4 usecs
calling tcpmss_mt_init+0x0/0x14 @ 1
initcall tcpmss_mt_init+0x0/0x14 returned 0 after 4 usecs
calling time_mt_init+0x0/0x57 @ 1xt_time: kernel timezone is -0000
initcall time_mt_init+0x0/0x57 returned 0 after 1059 usecs
calling u32_mt_init+0x0/0xf @ 1
initcall u32_mt_init+0x0/0xf returned 0 after 4 usecs
calling ip_vs_init+0x0/0xe4 @ 1
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=1100 id=0
IPVS: ipvs loaded.
initcall ip_vs_init+0x0/0xe4 returned 0 after 5198 usecs
calling ip_vs_wrr_init+0x0/0xf @ 1
IPVS: [wrr] scheduler registered.
initcall ip_vs_wrr_init+0x0/0xf returned 0 after 83 usecs
calling ip_vs_lc_init+0x0/0xf @ 1
IPVS: [lc] scheduler registered.
initcall ip_vs_lc_init+0x0/0xf returned 0 after 889 usecs
calling ip_vs_lblc_init+0x0/0x33 @ 1
IPVS: [lblc] scheduler registered.
initcall ip_vs_lblc_init+0x0/0x33 returned 0 after 1230 usecs
calling ip_vs_lblcr_init+0x0/0x33 @ 1
IPVS: [lblcr] scheduler registered.
initcall ip_vs_lblcr_init+0x0/0x33 returned 0 after 421 usecs
calling ip_vs_dh_init+0x0/0xf @ 1
IPVS: [dh] scheduler registered.
initcall ip_vs_dh_init+0x0/0xf returned 0 after 889 usecs
calling ip_vs_sh_init+0x0/0xf @ 1
IPVS: [sh] scheduler registered.
initcall ip_vs_sh_init+0x0/0xf returned 0 after 891 usecs
calling ip_vs_sed_init+0x0/0xf @ 1
IPVS: [sed] scheduler registered.
initcall ip_vs_sed_init+0x0/0xf returned 0 after 1059 usecs
calling ip_vs_nq_init+0x0/0xf @ 1
IPVS: [nq] scheduler registered.
initcall ip_vs_nq_init+0x0/0xf returned 0 after 890 usecs
calling sysctl_ipv4_init+0x0/0x7a @ 1
initcall sysctl_ipv4_init+0x0/0x7a returned 0 after 64 usecs
calling ipip_init+0x0/0x7e @ 1
ipip: IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x7e returned 0 after 1085 usecs
calling gre_init+0x0/0x9b @ 1
gre: GRE over IPv4 demultiplexor driver
initcall gre_init+0x0/0x9b returned 0 after 1099 usecs
calling vti_init+0x0/0x6f @ 1
IPv4 over IPSec tunneling driver
initcall vti_init+0x0/0x6f returned 0 after 1163 usecs
calling init_syncookies+0x0/0x16 @ 1
initcall init_syncookies+0x0/0x16 returned 0 after 27 usecs
calling ah4_init+0x0/0x75 @ 1
initcall ah4_init+0x0/0x75 returned 0 after 17 usecs
calling esp4_init+0x0/0x75 @ 1
initcall esp4_init+0x0/0x75 returned 0 after 4 usecs
calling xfrm4_beet_init+0x0/0x14 @ 1
initcall xfrm4_beet_init+0x0/0x14 returned 0 after 16 usecs
calling tunnel4_init+0x0/0x6d @ 1
initcall tunnel4_init+0x0/0x6d returned 0 after 4 usecs
calling xfrm4_transport_init+0x0/0x14 @ 1
initcall xfrm4_transport_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1
initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 4 usecs
calling ipv4_netfilter_init+0x0/0xf @ 1
initcall ipv4_netfilter_init+0x0/0xf returned 0 after 16 usecs
calling nf_defrag_init+0x0/0x14 @ 1
initcall nf_defrag_init+0x0/0x14 returned 0 after 10 usecs
calling ip_tables_init+0x0/0x8d @ 1ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0x8d returned 0 after 969 usecs
calling iptable_filter_init+0x0/0x40 @ 1
initcall iptable_filter_init+0x0/0x40 returned 0 after 30 usecs
calling iptable_mangle_init+0x0/0x40 @ 1
initcall iptable_mangle_init+0x0/0x40 returned 0 after 48 usecs
calling iptable_raw_init+0x0/0x40 @ 1
initcall iptable_raw_init+0x0/0x40 returned 0 after 29 usecs
calling iptable_security_init+0x0/0x40 @ 1
initcall iptable_security_init+0x0/0x40 returned 0 after 25 usecs
calling ecn_tg_init+0x0/0xf @ 1
initcall ecn_tg_init+0x0/0xf returned 0 after 4 usecs
calling synproxy_tg4_init+0x0/0x41 @ 1
initcall synproxy_tg4_init+0x0/0x41 returned 0 after 4 usecs
calling ulog_tg_init+0x0/0x96 @ 1
initcall ulog_tg_init+0x0/0x96 returned 0 after 29 usecs
calling inet_diag_init+0x0/0x6d @ 1
initcall inet_diag_init+0x0/0x6d returned 0 after 12 usecs
calling tcp_diag_init+0x0/0xf @ 1
initcall tcp_diag_init+0x0/0xf returned 0 after 19 usecs
calling cubictcp_register+0x0/0x78 @ 1
TCP: cubic registered
initcall cubictcp_register+0x0/0x78 returned 0 after 982 usecs
calling xfrm_user_init+0x0/0x41 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x41 returned 0 after 932 usecs
calling unix_diag_init+0x0/0xf @ 1
initcall unix_diag_init+0x0/0xf returned 0 after 4 usecs
calling inet6_init+0x0/0x2f3 @ 1
NET: Registered protocol family 10
initcall inet6_init+0x0/0x2f3 returned 0 after 2596 usecs
calling ah6_init+0x0/0x75 @ 1
initcall ah6_init+0x0/0x75 returned 0 after 4 usecs
calling esp6_init+0x0/0x75 @ 1
initcall esp6_init+0x0/0x75 returned 0 after 4 usecs
calling tunnel6_init+0x0/0x75 @ 1
initcall tunnel6_init+0x0/0x75 returned 0 after 4 usecs
calling xfrm6_transport_init+0x0/0x14 @ 1
initcall xfrm6_transport_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1
initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm6_ro_init+0x0/0x14 @ 1
initcall xfrm6_ro_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm6_beet_init+0x0/0x14 @ 1
initcall xfrm6_beet_init+0x0/0x14 returned 0 after 4 usecs
calling ip6_tables_init+0x0/0x8d @ 1ip6_tables: (C) 2000-2006 Netfilter Core Team
initcall ip6_tables_init+0x0/0x8d returned 0 after 1139 usecs
calling ip6table_filter_init+0x0/0x40 @ 1
initcall ip6table_filter_init+0x0/0x40 returned 0 after 33 usecs
calling ip6table_mangle_init+0x0/0x40 @ 1
initcall ip6table_mangle_init+0x0/0x40 returned 0 after 68 usecs
calling ip6table_raw_init+0x0/0x40 @ 1
initcall ip6table_raw_init+0x0/0x40 returned 0 after 24 usecs
calling nf_defrag_init+0x0/0x4a @ 1
initcall nf_defrag_init+0x0/0x4a returned 0 after 50 usecs
calling ah_mt6_init+0x0/0xf @ 1
initcall ah_mt6_init+0x0/0xf returned 0 after 4 usecs
calling eui64_mt6_init+0x0/0xf @ 1
initcall eui64_mt6_init+0x0/0xf returned 0 after 4 usecs
calling frag_mt6_init+0x0/0xf @ 1
initcall frag_mt6_init+0x0/0xf returned 0 after 4 usecs
calling ipv6header_mt6_init+0x0/0xf @ 1
initcall ipv6header_mt6_init+0x0/0xf returned 0 after 4 usecs
calling mh_mt6_init+0x0/0xf @ 1
initcall mh_mt6_init+0x0/0xf returned 0 after 4 usecs
calling rpfilter_mt_init+0x0/0xf @ 1
initcall rpfilter_mt_init+0x0/0xf returned 0 after 4 usecs
calling synproxy_tg6_init+0x0/0x41 @ 1
initcall synproxy_tg6_init+0x0/0x41 returned 0 after 4 usecs
calling sit_init+0x0/0xbc @ 1
sit: IPv6 over IPv4 tunneling driver
initcall sit_init+0x0/0xbc returned 0 after 1970 usecs
calling ip6_tunnel_init+0x0/0xb4 @ 1
initcall ip6_tunnel_init+0x0/0xb4 returned 0 after 392 usecs
calling ip6gre_init+0x0/0x98 @ 1ip6_gre: GRE over IPv6 tunneling driver
initcall ip6gre_init+0x0/0x98 returned 0 after 1477 usecs
calling packet_init+0x0/0x39 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x39 returned 0 after 1248 usecs
calling packet_diag_init+0x0/0xf @ 1
initcall packet_diag_init+0x0/0xf returned 0 after 4 usecs
calling ipsec_pfkey_init+0x0/0x69 @ 1
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x69 returned 0 after 253 usecs
calling ipx_init+0x0/0xd6 @ 1
NET: Registered protocol family 4
initcall ipx_init+0x0/0xd6 returned 0 after 1149 usecs
calling atalk_init+0x0/0x78 @ 1
NET: Registered protocol family 5
initcall atalk_init+0x0/0x78 returned 0 after 1121 usecs
calling x25_init+0x0/0x81 @ 1
NET: Registered protocol family 9
X.25 for Linux Version 0.2
initcall x25_init+0x0/0x81 returned 0 after 1963 usecs
calling lapb_init+0x0/0x7 @ 1
initcall lapb_init+0x0/0x7 returned 0 after 4 usecs
calling nr_proto_init+0x0/0x261 @ 1
NET: Registered protocol family 6
initcall nr_proto_init+0x0/0x261 returned 0 after 2061 usecs
calling rose_proto_init+0x0/0x28f @ 1
NET: Registered protocol family 11
initcall rose_proto_init+0x0/0x28f returned 0 after 3669 usecs
calling ax25_init+0x0/0xae @ 1
NET: Registered protocol family 3
initcall ax25_init+0x0/0xae returned 0 after 1089 usecs
calling can_init+0x0/0xe5 @ 1
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
initcall can_init+0x0/0xe5 returned 0 after 1942 usecs
calling bcm_module_init+0x0/0x4c @ 1
can: broadcast manager protocol (rev 20120528 t)
initcall bcm_module_init+0x0/0x4c returned 0 after 697 usecs
calling cgw_module_init+0x0/0x107 @ 1
can: netlink gateway (rev 20130117) max_hops=1
initcall cgw_module_init+0x0/0x107 returned 0 after 350 usecs
calling irlan_init+0x0/0x255 @ 1
initcall irlan_init+0x0/0x255 returned 0 after 426 usecs
calling rfcomm_init+0x0/0xe3 @ 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
initcall rfcomm_init+0x0/0xe3 returned 0 after 2622 usecs
calling hidp_init+0x0/0x21 @ 1
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
initcall hidp_init+0x0/0x21 returned 0 after 2445 usecs
calling init_rpcsec_gss+0x0/0x54 @ 1
initcall init_rpcsec_gss+0x0/0x54 returned 0 after 123 usecs
calling xprt_rdma_init+0x0/0xbc @ 1
RPC: Registered rdma transport module.
initcall xprt_rdma_init+0x0/0xbc returned 0 after 954 usecs
calling svc_rdma_init+0x0/0x193 @ 1
initcall svc_rdma_init+0x0/0x193 returned 0 after 80 usecs
calling af_rxrpc_init+0x0/0x1a0 @ 1
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 2949 usecs
calling rxkad_init+0x0/0x2f @ 1
RxRPC: Registered security type 2 'rxkad'
initcall rxkad_init+0x0/0x2f returned 0 after 1650 usecs
calling atm_clip_init+0x0/0x9c @ 1
initcall atm_clip_init+0x0/0x9c returned 0 after 35 usecs
calling br2684_init+0x0/0x4a @ 1
initcall br2684_init+0x0/0x4a returned 0 after 27 usecs
calling lane_module_init+0x0/0x6b @ 1
lec:lane_module_init: lec.c: initialized
initcall lane_module_init+0x0/0x6b returned 0 after 1270 usecs
calling atm_mpoa_init+0x0/0x45 @ 1
mpoa:atm_mpoa_init: mpc.c: initialized
initcall atm_mpoa_init+0x0/0x45 returned 0 after 930 usecs
calling decnet_init+0x0/0x8a @ 1
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 36Kbytes
NET: Registered protocol family 12
initcall decnet_init+0x0/0x8a returned 0 after 2701 usecs
calling dn_rtmsg_init+0x0/0x74 @ 1
initcall dn_rtmsg_init+0x0/0x74 returned 0 after 25 usecs
calling phonet_init+0x0/0x71 @ 1
NET: Registered protocol family 35
initcall phonet_init+0x0/0x71 returned 0 after 1282 usecs
calling pep_register+0x0/0x14 @ 1
initcall pep_register+0x0/0x14 returned 0 after 18 usecs
calling vlan_proto_init+0x0/0x88 @ 1
8021q: 802.1Q VLAN Support v1.8
initcall vlan_proto_init+0x0/0x88 returned 0 after 788 usecs
calling dccp_init+0x0/0x2ec @ 1
DCCP: Activated CCID 2 (TCP-like)
DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
initcall dccp_init+0x0/0x2ec returned 0 after 5991 usecs
calling dccp_v4_init+0x0/0x70 @ 1
initcall dccp_v4_init+0x0/0x70 returned 0 after 87 usecs
calling dccp_v6_init+0x0/0x70 @ 1
initcall dccp_v6_init+0x0/0x70 returned 0 after 81 usecs
calling dccp_diag_init+0x0/0xf @ 1
initcall dccp_diag_init+0x0/0xf returned 0 after 4 usecs
calling sctp_init+0x0/0x495 @ 1
sctp: Hash tables configured (established 32768 bind 29127)
initcall sctp_init+0x0/0x495 returned 0 after 4239 usecs
calling lib80211_init+0x0/0x1c @ 1
lib80211: common routines for IEEE802.11 driverslib80211_crypt: registered algorithm 'NULL'
initcall lib80211_init+0x0/0x1c returned 0 after 2444 usecs
calling lib80211_crypto_wep_init+0x0/0xf @ 1lib80211_crypt: registered algorithm 'WEP'
initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 629 usecs
calling lib80211_crypto_ccmp_init+0x0/0xf @ 1lib80211_crypt: registered algorithm 'CCMP'
initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 799 usecs
calling lib80211_crypto_tkip_init+0x0/0xf @ 1lib80211_crypt: registered algorithm 'TKIP'
initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 1773 usecs
calling tipc_init+0x0/0xee @ 1
tipc: Activated (version 2.0.0)
NET: Registered protocol family 30
tipc: Started in single node mode
initcall tipc_init+0x0/0xee returned 0 after 4563 usecs
calling init_p9+0x0/0x1e @ 1
9pnet: Installing 9P2000 support
initcall init_p9+0x0/0x1e returned 0 after 1881 usecs
calling p9_virtio_init+0x0/0x2d @ 1
initcall p9_virtio_init+0x0/0x2d returned 0 after 38 usecs
calling p9_trans_rdma_init+0x0/0x11 @ 1
initcall p9_trans_rdma_init+0x0/0x11 returned 0 after 4 usecs
calling dcbnl_init+0x0/0x5e @ 1
initcall dcbnl_init+0x0/0x5e returned 0 after 4 usecs
calling af_ieee802154_init+0x0/0x63 @ 1
NET: Registered protocol family 36
initcall af_ieee802154_init+0x0/0x63 returned 0 after 1230 usecs
calling lowpan_init_module+0x0/0x47 @ 1
initcall lowpan_init_module+0x0/0x47 returned 0 after 18 usecs
calling wimax_subsys_init+0x0/0x231 @ 1
initcall wimax_subsys_init+0x0/0x231 returned 0 after 62 usecs
calling init_dns_resolver+0x0/0xce @ 1
Key type dns_resolver registered
initcall init_dns_resolver+0x0/0xce returned 0 after 891 usecs
calling init_ceph_lib+0x0/0x6d @ 1
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
initcall init_ceph_lib+0x0/0x6d returned 0 after 2249 usecs
calling vmci_transport_init+0x0/0x121 @ 1
NET: Registered protocol family 40
initcall vmci_transport_init+0x0/0x121 returned 0 after 1296 usecs
calling mpls_gso_init+0x0/0x28 @ 1mpls_gso: MPLS GSO support
initcall mpls_gso_init+0x0/0x28 returned 0 after 852 usecs
calling mcheck_init_device+0x0/0x20d @ 1
initcall mcheck_init_device+0x0/0x20d returned -5 after 4 usecs
calling mcheck_debugfs_init+0x0/0x3e @ 1
initcall mcheck_debugfs_init+0x0/0x3e returned 0 after 45 usecs
calling severities_debugfs_init+0x0/0x40 @ 1
initcall severities_debugfs_init+0x0/0x40 returned 0 after 23 usecs
calling lapic_insert_resource+0x0/0x34 @ 1
initcall lapic_insert_resource+0x0/0x34 returned -1 after 4 usecs
calling io_apic_bug_finalize+0x0/0x1a @ 1
initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 4 usecs
calling print_ICs+0x0/0x40d @ 1
printing PIC contents
printing PIC contents
... PIC IMR: 3618 ... PIC IRR: 0001 ... PIC ISR: 0000
... PIC ELCR: 0828
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 00000000
... APIC TASKPRI: 00000000 (00)
... APIC RRR: 00000000
... APIC LDR: 00000000
... APIC DFR: 00000000
... APIC SPIV: 00000000
... APIC ISR field:
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... APIC TMR field:
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... APIC IRR field:
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... APIC ICR: 00000000
... APIC ICR2: 00000000
... APIC LVTT: 00000000
... APIC LVT0: 00000000
... APIC LVT1: 00000000
... APIC TMICT: 00000000
... APIC TMCCT: 00000000
... APIC TDCR: 00000000
number of MP IRQ sources: 0.
testing the IO APIC.......................
IRQ to pin mappings:
.................................... done.
initcall print_ICs+0x0/0x40d returned 0 after 8887 usecs calling print_ipi_mode+0x0/0x2e @ 1
Using IPI Shortcut mode
initcall print_ipi_mode+0x0/0x2e returned 0 after 1320 usecs calling check_early_ioremap_leak+0x0/0x54 @ 1
initcall check_early_ioremap_leak+0x0/0x54 returned 0 after 4 usecs calling pat_memtype_list_init+0x0/0x3a @ 1
initcall pat_memtype_list_init+0x0/0x3a returned 0 after 16 usecs calling init_oops_id+0x0/0x3b @ 1
initcall init_oops_id+0x0/0x3b returned 0 after 4 usecs calling sched_init_debug+0x0/0x2a @ 1
initcall sched_init_debug+0x0/0x2a returned 0 after 14 usecs calling pm_qos_power_init+0x0/0x5b @ 1
initcall pm_qos_power_init+0x0/0x5b returned 0 after 216 usecs calling pm_debugfs_init+0x0/0x2a @ 1
initcall pm_debugfs_init+0x0/0x2a returned 0 after 15 usecs calling printk_late_init+0x0/0x4c @ 1
initcall printk_late_init+0x0/0x4c returned 0 after 4 usecs calling tk_debug_sleep_time_init+0x0/0x41 @ 1
initcall tk_debug_sleep_time_init+0x0/0x41 returned 0 after 14 usecs calling test_ringbuffer+0x0/0x448 @ 1
Running ring buffer tests...
finished
CPU 0:
events: 5000
dropped bytes: 0
alloced bytes: 389428
written bytes: 382036
biggest event: 23
smallest event: 0
read events: 5000
lost events: 0
total events: 5000
recorded len bytes: 389428
recorded size bytes: 382036Ring buffer PASSED!
initcall test_ringbuffer+0x0/0x448 returned 0 after 9780917 usecs calling clear_boot_tracer+0x0/0x30 @ 1
initcall clear_boot_tracer+0x0/0x30 returned 0 after 4 usecs calling set_recommended_min_free_kbytes+0x0/0x6d @ 1
initcall set_recommended_min_free_kbytes+0x0/0x6d returned 0 after 72 usecs calling afs_init+0x0/0x169 @ 1
kAFS: Red Hat AFS client v0.1 registering.
initcall afs_init+0x0/0x169 returned 0 after 2198 usecs
calling init_trusted+0x0/0xa8 @ 1
Key type trusted registered
initcall init_trusted+0x0/0xa8 returned 0 after 1302 usecs calling init_encrypted+0x0/0xfa @ 1
Key type encrypted registered
initcall init_encrypted+0x0/0xfa returned 0 after 1961 usecs calling init_ima+0x0/0x18 @ 1
IMA: No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x18 returned 0 after 1403 usecs
calling prandom_reseed+0x0/0x55 @ 1
initcall prandom_reseed+0x0/0x55 returned 0 after 9 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 17 usecs calling pci_sysfs_init+0x0/0x48 @ 1
initcall pci_sysfs_init+0x0/0x48 returned 0 after 237 usecs calling regulator_init_complete+0x0/0x14c @ 1
initcall regulator_init_complete+0x0/0x14c returned 0 after 4 usecs calling random_int_secret_init+0x0/0x16 @ 1
initcall random_int_secret_init+0x0/0x16 returned 0 after 16 usecs calling deferred_probe_initcall+0x0/0x73 @ 1
initcall deferred_probe_initcall+0x0/0x73 returned 0 after 99 usecs calling late_resume_init+0x0/0x1bb @ 1
Magic number: 1:448:497
initcall late_resume_init+0x0/0x1bb returned 0 after 1923 usecs calling wl1273_core_init+0x0/0x29 @ 1
initcall wl1273_core_init+0x0/0x29 returned 0 after 59 usecs calling init_netconsole+0x0/0x1a3 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1a3 returned 0 after 2078 usecs calling vxlan_init_module+0x0/0x8e @ 1
initcall vxlan_init_module+0x0/0x8e returned 0 after 38 usecs calling gpio_keys_init+0x0/0x11 @ 1
initcall gpio_keys_init+0x0/0x11 returned 0 after 77 usecs calling edd_init+0x0/0x2bd @ 1
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
initcall edd_init+0x0/0x2bd returned -19 after 1897 usecs
calling firmware_memmap_init+0x0/0x29 @ 1
initcall firmware_memmap_init+0x0/0x29 returned 0 after 56 usecs calling tcp_congestion_default+0x0/0xf @ 1
initcall tcp_congestion_default+0x0/0xf returned 0 after 4 usecs calling tcp_fastopen_init+0x0/0x40 @ 1
initcall tcp_fastopen_init+0x0/0x40 returned 0 after 37 usecs calling ip_auto_config+0x0/0xe11 @ 1
initcall ip_auto_config+0x0/0xe11 returned 0 after 24 usecs calling initialize_hashrnd+0x0/0x16 @ 1
initcall initialize_hashrnd+0x0/0x16 returned 0 after 6 usecs async_waiting @ 1async_continuing @ 1 after 4 usec
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1. async_waiting @ 1async_continuing @ 1 after 4 usec
debug: unmapping init [mem 0xb2d05000-0xb2dbbfff]
Write protecting the kernel text: 19924k
Testing CPA: Reverting b1000000-b2375000
Testing CPA: write protecting again
Write protecting the kernel read-only data: 8024k
Testing CPA: undo b2375000-b2b4b000
Testing CPA: write protecting again
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
INIT: version 2.86 booting
BUG: unable to handle kernel BUG: unable to handle kernel paging requestpaging request at eaf10f40 at eaf10f40 IP:IP: [<b103e0ef>] task_work_run+0x52/0x87 [<b103e0ef>] task_work_run+0x52/0x87
*pde = 3fbf9067 *pde = 3fbf9067 *pte = 3af10060 *pte = 3af10060
Oops: 0000 [#1] Oops: 0000 [#1] DEBUG_PAGEALLOCDEBUG_PAGEALLOC CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 task: eaf157a0 ti: eacf2000 task.ti: eacf2000 EIP: 0060:[<b103e0ef>] EFLAGS: 00010282 CPU: 0 EIP is at task_work_run+0x52/0x87 EAX: eaf10f40 EBX: eaf13f40 ECX: 00000000 EDX: eaf10f40 ESI: eaf15a38 EDI: eaf157a0 EBP: eacf3f3c ESP: eacf3f30 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 CR0: 8005003b CR2: eaf10f40 CR3: 3acf6000 CR4: 00000690 Stack: eaf15a50 eaf15a50 eacf5dc0 eacf5dc0 eaf157a0 eaf157a0 eacf3f8c eacf3f8c b1029d1d b1029d1d 00000000 00000000 b01137a0 b01137a0 eaf157a0 eaf157a0
eaf157a0 eaf157a0 eaf13f40 eaf13f40 00000001 00000001 00000007 00000007 eacf3f88 eacf3f88 b10cdebb b10cdebb 00000001 00000001 eacf5e10 eacf5e10
00000000 00000000 eaf13f48 eaf13f48 00000002 00000002 eaf13f40 eaf13f40 eace1d80 eace1d80 00000000 00000000 eaf157a0 eaf157a0 eacf3fa4 eacf3fa4
Call Trace: [<b1029d1d>] do_exit+0x291/0x753 [<b10cdebb>] ? vfs_write+0x11f/0x15a [<b102a262>] do_group_exit+0x59/0x86 [<b102a29f>] SyS_exit_group+0x10/0x10 [<b237365b>] sysenter_do_call+0x12/0x2d
Code:Code: ed ed dc dc b2 b2 0f 0f 45 45 c8 c8 eb eb 02 02 31 31 c9 c9 89 89 d0 d0 0f 0f b1 b1 0e 0e 39 39 c2 c2 75 75 d8 d8 85 85 d2 d2 74 74 41 41 f3 f3 90 90 8b 8b 87 87 d0 d0 02 02 00 00 00 00 85 85 c0 c0 74 74 f4 f4 31 31 db db eb eb 04 04 89 89 d3 d3 89 89 c2 c2 <8b> <8b> 02 02 85 85 c0 c0 89 89 1a 1a 75 75 f4 f4 89 89 d0 d0 ff ff 52 52 04 04 31 31 c9 c9 ba ba 7d 7d 00 00 00 00 00 00 b8 b8
EIP: [<b103e0ef>] EIP: [<b103e0ef>] task_work_run+0x52/0x87task_work_run+0x52/0x87 SS:ESP 0068:eacf3f30
SS:ESP 0068:eacf3f30
CR2: 00000000eaf10f40
---[ end trace a7919e7f17c0a729 ]---
Fixing recursive fault but reboot is needed!
CPA self-test:
4k 262128 large 0 gb 0 x 262128[b0000000-effef000] miss 0
ok.
an interesting aspect is that this is a 32-bit UP kernel.
Thanks,
Ingo
I started bisecting the crash, and the good news is that it's bisectable and it's not the NUMA bits that are causing the crash.
(the bad news is that I now face a boring, possibly very long bisection, but hey ;-)
Thanks,
Ingo
Peter Zijlstra
maintainerQuoted 6 lines · Ingo Molnar
I started bisecting the crash, and the good news is that it's bisectable and it's not the NUMA bits that are causing the crash.
(the bad news is that I now face a boring, possibly very long bisection, but hey ;-)
Its the RMW bits..
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Peter Zijlstra
maintainerQuoted 23 lines · Ingo Molnar
Hm, so I'm seeing boot crashes with the config attached:
INIT: version 2.86 booting
BUG: unable to handle kernel BUG: unable to handle kernel paging requestpaging request at eaf10f40 at eaf10f40 IP:IP: [<b103e0ef>] task_work_run+0x52/0x87 [<b103e0ef>] task_work_run+0x52/0x87 *pde = 3fbf9067 *pde = 3fbf9067 *pte = 3af10060 *pte = 3af10060 Oops: 0000 [#1] Oops: 0000 [#1] DEBUG_PAGEALLOCDEBUG_PAGEALLOC CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 task: eaf157a0 ti: eacf2000 task.ti: eacf2000Note that the config does not have
NUMA_BALANCINGenabled. With another config I also had a failed bootup due to the OOM killer kicking in. That didn't haveNUMA_BALANCINGenabled either.
Quoted 5 lines
Yet this all started today, after merging the NUMA patches.
Any ideas?
CONFIG_MGEODE_LX=y
It looks like -march=geode generates similar borkage to the -march=winchip2 like we found earlier today.
Must be randconfig luck to only hit it now.
Very easy to see if you build kernel/task_work.s, the bitops jc label path fails to initialize the return value.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 26 lines · Peter Zijlstra
Quoted 25 lines · Ingo Molnar
Hm, so I'm seeing boot crashes with the config attached:
INIT: version 2.86 booting
BUG: unable to handle kernel BUG: unable to handle kernel paging requestpaging request at eaf10f40 at eaf10f40 IP:IP: [<b103e0ef>] task_work_run+0x52/0x87 [<b103e0ef>] task_work_run+0x52/0x87 *pde = 3fbf9067 *pde = 3fbf9067 *pte = 3af10060 *pte = 3af10060 Oops: 0000 [#1] Oops: 0000 [#1] DEBUG_PAGEALLOCDEBUG_PAGEALLOC CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 task: eaf157a0 ti: eacf2000 task.ti: eacf2000Note that the config does not have
NUMA_BALANCINGenabled. With another config I also had a failed bootup due to the OOM killer kicking in. That didn't haveNUMA_BALANCINGenabled either.Yet this all started today, after merging the NUMA patches.
Quoted 8 lines
Quoted 3 lines
Any ideas?
CONFIG_MGEODE_LX=yIt looks like -march=geode generates similar borkage to the -march=winchip2 like we found earlier today.
Must be randconfig luck to only hit it now.
Yes, very weird but such is life :-)
Also note that this reproduces with GCC 4.7 ...
Thanks,
Ingo
Peter Zijlstra
maintainerQuoted 8 lines · Ingo Molnar
Quoted 4 lines
It looks like -march=geode generates similar borkage to the -march=winchip2 like we found earlier today.
Must be randconfig luck to only hit it now.
Yes, very weird but such is life :-)
Also note that this reproduces with GCC 4.7 ...
Yes, it does so too for me, I tried both 4.7 and 4.8; they generate different but similarly broken code.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Mel Gorman
reviewerAutomatic NUMA balancing patches for tip-urgent/stable
In reply to Mel GormanQuoted 9 lines · Mel Gorman
This series has roughly the same goals as previous versions despite the size. It reduces overhead of automatic balancing through scan rate reduction and the avoidance of TLB flushes. It selects a preferred node and moves tasks towards their memory as well as moving memory toward their task. It handles shared pages and groups related tasks together. Some problems such as shared page interleaving and properly dealing with processes that are larger than a node are being deferred. This version should be ready for wider testing in -tip.
Hi Ingo,
Off-list we talked with Peter about the fact that automatic NUMA balancing as merged in 3.10, 3.11 and 3.12 shortly may corrupt userspace memory. There is one LKML report on this that I'm aware of --
https://lkml.org/lkml/2013/7/31/647 which I prompt forgot to follow up properly on . The user-visible effect is that pages get filled with zeros with results such as null pointer exceptions in JVMs. It is fairly difficult to trigger but it became much easier to trigger during the development of the series "Basic scheduler support for automatic NUMA balancing" which is how it was discovered and finally fixed.
In that series I tagged patches 2-9 for -stable as these patches addressed the problem for me. I did not call it out as clearly as I should have and did not realise the cc: stable tags were stripped. Worse, as it was close to the release and the bug is relatively old I was ok with waiting until 3.12 came out and then treat it as a -stable backport. It has been highlighted that this is the wrong attitude and we should consider merging the fixes now and backporting to -stable sooner rather than later.
The most important patches are
mm: Wait for THP migrations to complete during NUMA hinting fault
mm: Prevent parallel splits during THP migration
mm: Close races between THP migration and PMD numa clearing
but on their own they will cause conflicts with tricky fixups and -stable would differ from mainline in annoying ways. Patches 2-9 have been heavily tested in isolation so I'm reasonably confident they fix the problem and are -stable material. While strictly speaking not all the patches are required for the fix, the -stable kernels would then be directly comparable with 3.13 when the full NUMA balancing series is applied. If I rework them at this point then I'll also have to retest delaying things until next week.
Please consider queueing patches 2-9 for 3.12 via -urgent if it is not too late and preserve the cc: stable tags so Greg will pick them up automatically.
Thanks
Signature · 2 lines
Mel Gorman SUSE Labs
Re: Automatic NUMA balancing patches for tip-urgent/stable
Quoted 45 lines · Mel Gorman
Quoted 9 lines · Mel Gorman
This series has roughly the same goals as previous versions despite the size. It reduces overhead of automatic balancing through scan rate reduction and the avoidance of TLB flushes. It selects a preferred node and moves tasks towards their memory as well as moving memory toward their task. It handles shared pages and groups related tasks together. Some problems such as shared page interleaving and properly dealing with processes that are larger than a node are being deferred. This version should be ready for wider testing in -tip.
Hi Ingo,
Off-list we talked with Peter about the fact that automatic NUMA balancing as merged in 3.10, 3.11 and 3.12 shortly may corrupt userspace memory. There is one LKML report on this that I'm aware of --
https://lkml.org/lkml/2013/7/31/647 which I prompt forgot to follow up properly on . The user-visible effect is that pages get filled with zeros with results such as null pointer exceptions in JVMs. It is fairly difficult to trigger but it became much easier to trigger during the development of the series "Basic scheduler support for automatic NUMA balancing" which is how it was discovered and finally fixed.In that series I tagged patches 2-9 for -stable as these patches addressed the problem for me. I did not call it out as clearly as I should have and did not realise the cc: stable tags were stripped. Worse, as it was close to the release and the bug is relatively old I was ok with waiting until 3.12 came out and then treat it as a -stable backport. It has been highlighted that this is the wrong attitude and we should consider merging the fixes now and backporting to -stable sooner rather than later.
The most important patches are
mm: Wait for THP migrations to complete during NUMA hinting fault
mm: Prevent parallel splits during THP migration
mm: Close races between THP migration and PMD numa clearingbut on their own they will cause conflicts with tricky fixups and -stable would differ from mainline in annoying ways. Patches 2-9 have been heavily tested in isolation so I'm reasonably confident they fix the problem and are -stable material. While strictly speaking not all the patches are required for the fix, the -stable kernels would then be directly comparable with 3.13 when the full NUMA balancing series is applied. If I rework them at this point then I'll also have to retest delaying things until next week.
Quoted 3 lines
Please consider queueing patches 2-9 for 3.12 via -urgent if it is not too late and preserve the cc: stable tags so Greg will pick them up automatically.
Would be nice if you gave me all the specific SHA1 tags of sched/core that are required for the fix. We can certainly use a range to make it all safer to apply.
Thanks,
Ingo
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Mel Gorman
reviewerRe: Automatic NUMA balancing patches for tip-urgent/stable
Quoted 48 lines · Ingo Molnar
Quoted 45 lines · Mel Gorman
Quoted 9 lines · Mel Gorman
This series has roughly the same goals as previous versions despite the size. It reduces overhead of automatic balancing through scan rate reduction and the avoidance of TLB flushes. It selects a preferred node and moves tasks towards their memory as well as moving memory toward their task. It handles shared pages and groups related tasks together. Some problems such as shared page interleaving and properly dealing with processes that are larger than a node are being deferred. This version should be ready for wider testing in -tip.
Hi Ingo,
Off-list we talked with Peter about the fact that automatic NUMA balancing as merged in 3.10, 3.11 and 3.12 shortly may corrupt userspace memory. There is one LKML report on this that I'm aware of --
https://lkml.org/lkml/2013/7/31/647 which I prompt forgot to follow up properly on . The user-visible effect is that pages get filled with zeros with results such as null pointer exceptions in JVMs. It is fairly difficult to trigger but it became much easier to trigger during the development of the series "Basic scheduler support for automatic NUMA balancing" which is how it was discovered and finally fixed.In that series I tagged patches 2-9 for -stable as these patches addressed the problem for me. I did not call it out as clearly as I should have and did not realise the cc: stable tags were stripped. Worse, as it was close to the release and the bug is relatively old I was ok with waiting until 3.12 came out and then treat it as a -stable backport. It has been highlighted that this is the wrong attitude and we should consider merging the fixes now and backporting to -stable sooner rather than later.
The most important patches are
mm: Wait for THP migrations to complete during NUMA hinting fault
mm: Prevent parallel splits during THP migration
mm: Close races between THP migration and PMD numa clearingbut on their own they will cause conflicts with tricky fixups and -stable would differ from mainline in annoying ways. Patches 2-9 have been heavily tested in isolation so I'm reasonably confident they fix the problem and are -stable material. While strictly speaking not all the patches are required for the fix, the -stable kernels would then be directly comparable with 3.13 when the full NUMA balancing series is applied. If I rework them at this point then I'll also have to retest delaying things until next week.
Quoted 8 lines
Quoted 3 lines
Please consider queueing patches 2-9 for 3.12 via -urgent if it is not too late and preserve the cc: stable tags so Greg will pick them up automatically.
Would be nice if you gave me all the specific SHA1 tags of sched/core that are required for the fix. We can certainly use a range to make it all safer to apply.
Of course. The range of the relevant commits in tip/sched/core is ca4be374c5c0ab3d8b84fb2861d663216281e6ac..778ec5247bb79815af12434980164334fb94cc9e
904f64a376e663cd459fb7aec4f12e14c39c24b6 mm: numa: Document automatic NUMA balancing sysctls 1d649bccc8c1370e402b85e1d345ad24f3f0d1b5 sched, numa: Comment fixlets f961cab8d55d55d6abc0df08ce2abec8ab56f2c8 mm: numa: Do not account for a hinting fault if we raced 6f2a15fc1df62af3ba3be327877b7e53cb16e878 mm: Wait for THP migrations to complete during NUMA hinting faults 4ee547f994c633f2607d222e2c6385b6fe5f07d8 mm: Prevent parallel splits during THP migration dd83227f0d93fb37d7621a24e8465b13b437faa6 mm: numa: Sanitize task_numa_fault() callsites efeeacf7b94babff85da7e468fc5450fdfab0900 mm: Close races between THP migration and PMD numa clearing 778ec5247bb79815af12434980164334fb94cc9e mm: Account for a THP NUMA hinting update as one PTE update
Thanks.
Signature · 2 lines
Mel Gorman SUSE Labs
Re: Automatic NUMA balancing patches for tip-urgent/stable
Quoted 7 lines · Mel Gorman
Quoted 3 lines
Would be nice if you gave me all the specific SHA1 tags of sched/core that are required for the fix. We can certainly use a range to make it all safer to apply.
Of course. The range of the relevant commits in tip/sched/core is
ca4be374c5c0ab3d8b84fb2861d663216281e6ac..778ec5247bb79815af12434980164334fb94cc9e
Quoted 8 lines
904f64a376e663cd459fb7aec4f12e14c39c24b6mm: numa: Document automatic NUMA balancing sysctls1d649bccc8c1370e402b85e1d345ad24f3f0d1b5sched, numa: Comment fixletsf961cab8d55d55d6abc0df08ce2abec8ab56f2c8mm: numa: Do not account for a hinting fault if we raced6f2a15fc1df62af3ba3be327877b7e53cb16e878mm: Wait for THP migrations to complete during NUMA hinting faults4ee547f994c633f2607d222e2c6385b6fe5f07d8mm: Prevent parallel splits during THP migrationdd83227f0d93fb37d7621a24e8465b13b437faa6mm: numa: Sanitizetask_numa_fault()callsitesefeeacf7b94babff85da7e468fc5450fdfab0900mm: Close races between THP migration and PMD numa clearing778ec5247bb79815af12434980164334fb94cc9emm: Account for a THP NUMA hinting update as one PTE update
These commits don't exist in -tip :-/
Some of these don't even exist as patch titles under different sha1's - such as "sched, numa: Comment fixlets".
So I'm really confused about what to pick up. What tree are you looking at?
-tip is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Thanks,
Ingo
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Mel Gorman
reviewerRe: Automatic NUMA balancing patches for tip-urgent/stable
Quoted 19 lines · Ingo Molnar
Quoted 7 lines · Mel Gorman
Quoted 3 lines
Would be nice if you gave me all the specific SHA1 tags of sched/core that are required for the fix. We can certainly use a range to make it all safer to apply.
Of course. The range of the relevant commits in tip/sched/core is
ca4be374c5c0ab3d8b84fb2861d663216281e6ac..778ec5247bb79815af12434980164334fb94cc9eQuoted 8 lines
904f64a376e663cd459fb7aec4f12e14c39c24b6mm: numa: Document automatic NUMA balancing sysctls1d649bccc8c1370e402b85e1d345ad24f3f0d1b5sched, numa: Comment fixletsf961cab8d55d55d6abc0df08ce2abec8ab56f2c8mm: numa: Do not account for a hinting fault if we raced6f2a15fc1df62af3ba3be327877b7e53cb16e878mm: Wait for THP migrations to complete during NUMA hinting faults4ee547f994c633f2607d222e2c6385b6fe5f07d8mm: Prevent parallel splits during THP migrationdd83227f0d93fb37d7621a24e8465b13b437faa6mm: numa: Sanitizetask_numa_fault()callsitesefeeacf7b94babff85da7e468fc5450fdfab0900mm: Close races between THP migration and PMD numa clearing778ec5247bb79815af12434980164334fb94cc9emm: Account for a THP NUMA hinting update as one PTE update
Quoted 2 lines
These commits don't exist in -tip :-/
Bah, I have tip as a remote tree but looked at my local copy of the commits in the incorrect branch. Lets try this again
37bf06375c90a42fe07b9bebdb07bc316ae5a0ce..afcae2655b0ab67e65f161b1bb214efcfa1db415
10fc05d0e551146ad6feb0ab8902d28a2d3c5624 mm: numa: Document automatic NUMA balancing sysctls c69307d533d7aa7cc8894dbbb8a274599f8630d7 sched/numa: Fix comments 0c3a775e1e0b069bf765f8355b723ce0d18dcc6c mm: numa: Do not account for a hinting fault if we raced ff9042b11a71c81238c70af168cd36b98a6d5a3c mm: Wait for THP migrations to complete during NUMA hinting faults b8916634b77bffb233d8f2f45703c80343457cc1 mm: Prevent parallel splits during THP migration 8191acbd30c73e45c24ad16c372e0b42cc7ac8f8 mm: numa: Sanitize task_numa_fault() callsites a54a407fbf7735fd8f7841375574f5d9b0375f93 mm: Close races between THP migration and PMD numa clearing afcae2655b0ab67e65f161b1bb214efcfa1db415 mm: Account for a THP NUMA hinting update as one PTE update
Signature · 2 lines
Mel Gorman SUSE Labs
Re: Automatic NUMA balancing patches for tip-urgent/stable
Quoted 4 lines · Mel Gorman
Bah, I have tip as a remote tree but looked at my local copy of the commits in the incorrect branch. Lets try this again
37bf06375c90a42fe07b9bebdb07bc316ae5a0ce..afcae2655b0ab67e65f161b1bb214efcfa1db415
Ok, these work a lot better and cherry-pick cleanly on top of -rc7.
Quoted 1 line
10fc05d0e551146ad6feb0ab8902d28a2d3c5624mm: numa: Document automatic NUMA balancing sysctls
We can certainly leave out this one - the rest still cherry-picks cleanly.
Quoted 1 line
c69307d533d7aa7cc8894dbbb8a274599f8630d7sched/numa: Fix comments
I was able to leave out this one as well.
Quoted 6 lines
0c3a775e1e0b069bf765f8355b723ce0d18dcc6cmm: numa: Do not account for a hinting fault if we racedff9042b11a71c81238c70af168cd36b98a6d5a3cmm: Wait for THP migrations to complete during NUMA hinting faultsb8916634b77bffb233d8f2f45703c80343457cc1mm: Prevent parallel splits during THP migration8191acbd30c73e45c24ad16c372e0b42cc7ac8f8mm: numa: Sanitizetask_numa_fault()callsitesa54a407fbf7735fd8f7841375574f5d9b0375f93mm: Close races between THP migration and PMD numa clearingafcae2655b0ab67e65f161b1bb214efcfa1db415mm: Account for a THP NUMA hinting update as one PTE update
Ok, these seem essential and cherry-pick cleanly.
Would be nice to avoid the 'Sanitize task_numa_fault() callsites' change, but the remaining fixes rely on it and are well tested together.
I've stuck these into tip:core/urgent with a -stable tag and will send them to Linus if he cuts an -rc8 (which seems unlikely at this point though).
If there's no -rc8 then please forward the above list of 6 commits to Greg so that it can be applied to -stable.
Thanks,
Ingo
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Mel Gorman
reviewerRe: Automatic NUMA balancing patches for tip-urgent/stable
Quoted 10 lines · Ingo Molnar
Quoted 4 lines · Mel Gorman
Bah, I have tip as a remote tree but looked at my local copy of the commits in the incorrect branch. Lets try this again
37bf06375c90a42fe07b9bebdb07bc316ae5a0ce..afcae2655b0ab67e65f161b1bb214efcfa1db415Ok, these work a lot better and cherry-pick cleanly on top of -rc7.
Quoted 9 lines
Quoted 1 line
10fc05d0e551146ad6feb0ab8902d28a2d3c5624mm: numa: Document automatic NUMA balancing sysctlsWe can certainly leave out this one - the rest still cherry-picks cleanly.
Quoted 1 line
c69307d533d7aa7cc8894dbbb8a274599f8630d7sched/numa: Fix commentsI was able to leave out this one as well.
Yes, both of those can be left out. They are outside the stable rules and including them to have comparable documentation in -stable is unnecessary.
Quoted 7 lines
Quoted 6 lines
0c3a775e1e0b069bf765f8355b723ce0d18dcc6cmm: numa: Do not account for a hinting fault if we racedff9042b11a71c81238c70af168cd36b98a6d5a3cmm: Wait for THP migrations to complete during NUMA hinting faultsb8916634b77bffb233d8f2f45703c80343457cc1mm: Prevent parallel splits during THP migration8191acbd30c73e45c24ad16c372e0b42cc7ac8f8mm: numa: Sanitizetask_numa_fault()callsitesa54a407fbf7735fd8f7841375574f5d9b0375f93mm: Close races between THP migration and PMD numa clearingafcae2655b0ab67e65f161b1bb214efcfa1db415mm: Account for a THP NUMA hinting update as one PTE update
Quoted 6 lines
Ok, these seem essential and cherry-pick cleanly.
Would be nice to avoid the 'Sanitize
task_numa_fault()callsites' change, but the remaining fixes rely on it and are well tested together.
It would have been nice but yes, the combination of patches would not have been well tested.
Quoted 7 lines
I've stuck these into tip:core/urgent with a -stable tag and will send them to Linus if he cuts an -rc8 (which seems unlikely at this point though).
If there's no -rc8 then please forward the above list of 6 commits to Greg so that it can be applied to -stable.
Thanks, I'll make sure they get sent to stable when the relevant patches show up in a mainline tree of some description.
Signature · 2 lines
Mel Gorman SUSE Labs
[RFC GIT PULL] NUMA-balancing memory corruption fixes
In reply to Mel GormanLinus,
Quoted 5 lines · Mel Gorman
Hi Ingo,
Off-list we talked with Peter about the fact that automatic NUMA balancing as merged in 3.10, 3.11 and 3.12 shortly may corrupt userspace memory. [...]
So these fixes are definitely not something I'd like to sit on, but as I said to you at the KS the timing is quite tight, with Linus planning v3.12-final within a week.
Fedora-19 is affected:
comet:~> grep NUMA_BALANCING /boot/config-3.11.3-201.fc19.x86_64
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_NUMA_BALANCING=y
AFAICS Ubuntu will be affected as well, once it updates the kernel:
hubble:~> grep NUMA_BALANCING /boot/config-3.8.0-32-generic
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_NUMA_BALANCING=y
Linus, please consider pulling the latest core-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core-urgent-for-linus
# HEAD: 0255d491848032f6c601b6410c3b8ebded3a37b1 mm: Account for a THP NUMA hinting update as one PTE update
These 6 commits are a minimalized set of cherry-picks needed to fix the memory corruption bugs. All commits are fixes, except "mm: numa:
Sanitize task_numa_fault() callsites" which is a cleanup that made two followup fixes simpler.
I've done targeted testing with just this SHA1 to try to make sure there are no cherry-picking artifacts. The original non-cherry-picked set of fixes were exposed to linux-next for a couple of weeks.
( If you think this is too dangerous for too little benefit then
I'll drop this separate tree and will send the original commits in the merge window. )
Thanks,
Ingo
------------------>
Mel Gorman (6):
mm: numa: Do not account for a hinting fault if we raced
mm: Wait for THP migrations to complete during NUMA hinting faults
mm: Prevent parallel splits during THP migration
mm: numa: Sanitize task_numa_fault() callsites
mm: Close races between THP migration and PMD numa clearing
mm: Account for a THP NUMA hinting update as one PTE update
mm/huge_memory.c | 70 ++++++++++++++++++++++++++++++++++++++------------------ mm/memory.c | 53 +++++++++++++++++------------------------- mm/migrate.c | 19 ++++++++------- mm/mprotect.c | 2 +- 4 files changed, 81 insertions(+), 63 deletions(-)
mm/huge_memory.c +48 -22
@@ -1278,64 +1278,90 @@ out:int do_huge_pmd_numa_page (struct mm_struct *mm,struct vm_area_struct *vma,unsigned long addr,pmd_t pmd,pmd_t *pmdp) { +struct anon_vma *anon_vma =NULL ;struct page *page;unsigned long haddr = addr &HPAGE_PMD_MASK ; +int page_nid =-1 , this_nid =numa_node_id ();int target_nid; -int current_nid =-1 ; -bool migrated; +bool page_locked; +bool migrated = false;spin_lock (&mm->page_table_lock);if (unlikely (!pmd_same (pmd, *pmdp))) goto out_unlock; page =pmd_page (pmd); -get_page (page); - current_nid =page_to_nid (page); + page_nid =page_to_nid (page);count_vm_numa_event (NUMA_HINT_FAULTS ); -if (current_nid ==numa_node_id ()) +if (page_nid == this_nid)count_vm_numa_event (NUMA_HINT_FAULTS_LOCAL ); +/* +* Acquire the page lock to serialise THP migrations but avoid dropping +* page_table_lock if at all possible +*/ + page_locked =trylock_page (page); target_nid =mpol_misplaced (page, vma, haddr);if (target_nid ==-1 ) { -put_page (page); - goto clear_pmdnuma; +/* If the page was locked, there are no parallel migrations */ +if (page_locked) + goto clear_pmdnuma; + +/* +* Otherwise wait for potential migrations and retry. We do +* relock and check_same as the page may no longer be mapped. +* As the fault is being retried, do not account for it. +*/ +spin_unlock (&mm->page_table_lock); +wait_on_page_locked (page); + page_nid =-1 ; + goto out; } -/* Acquire the page lock to serialise THP migrations */ +/* Page is misplaced, serialise migrations and parallel THP splits */ +get_page (page);spin_unlock (&mm->page_table_lock); -lock_page (page); +if (!page_locked) +lock_page (page); + anon_vma =page_lock_anon_vma_read (page);/* Confirm the PTE did not while locked */ spin_lock (&mm->page_table_lock);if (unlikely (!pmd_same (pmd, *pmdp))) {unlock_page (page);put_page (page); + page_nid =-1 ; goto out_unlock; } -spin_unlock (&mm->page_table_lock); -/* Migrate the THP to the requested node */ +/* +* Migrate the THP to the requested node, returns with page unlocked +* and pmd_numa cleared. +*/ +spin_unlock (&mm->page_table_lock); migrated =migrate_misplaced_transhuge_page (mm, vma, pmdp, pmd, addr, page, target_nid); -if (!migrated) - goto check_same; - -task_numa_fault (target_nid,HPAGE_PMD_NR , true); -return 0 ; +if (migrated) + page_nid = target_nid; -check_same: -spin_lock (&mm->page_table_lock); -if (unlikely (!pmd_same (pmd, *pmdp))) - goto out_unlock; + goto out; clear_pmdnuma: +BUG_ON (!PageLocked (page)); pmd =pmd_mknonnuma (pmd);set_pmd_at (mm, haddr, pmdp, pmd);VM_BUG_ON (pmd_numa (*pmdp));update_mmu_cache_pmd (vma, addr, pmdp); +unlock_page (page); out_unlock:spin_unlock (&mm->page_table_lock); -if (current_nid !=-1 ) -task_numa_fault (current_nid,HPAGE_PMD_NR , false); + +out: +if (anon_vma) +page_unlock_anon_vma_read (anon_vma); + +if (page_nid !=-1 ) +task_numa_fault (page_nid,HPAGE_PMD_NR , migrated); +return 0 ; }
mm/memory.c +21 -32
107 lines not on this page · raw message
mm/migrate.c +11 -8
@@ -1715,12 +1715,12 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,unlock_page (new_page);put_page (new_page);/* Free it */ -unlock_page (page); +/* Retake the callers reference and putback on LRU */ +get_page (page);putback_lru_page (page); - -count_vm_events (PGMIGRATE_FAIL ,HPAGE_PMD_NR ); - isolated =0 ; - goto out; +mod_zone_page_state (page_zone (page), +NR_ISOLATED_ANON + page_lru, -HPAGE_PMD_NR ); + goto out_fail; }/*
@@ -1737,9 +1737,9 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm, entry =maybe_pmd_mkwrite (pmd_mkdirty (entry), vma); entry =pmd_mkhuge (entry); -page_add_new_anon_rmap (new_page, vma, haddr); - +pmdp_clear_flush (vma, haddr, pmd);set_pmd_at (mm, haddr, pmd, entry); +page_add_new_anon_rmap (new_page, vma, haddr);update_mmu_cache_pmd (vma, address, &entry);page_remove_rmap (page);/*
@@ -1758,7 +1758,6 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,count_vm_events (PGMIGRATE_SUCCESS ,HPAGE_PMD_NR );count_vm_numa_events (NUMA_PAGE_MIGRATE ,HPAGE_PMD_NR ); -out:mod_zone_page_state (page_zone (page),NR_ISOLATED_ANON + page_lru, -HPAGE_PMD_NR );
@@ -1767,6 +1766,10 @@ out: out_fail:count_vm_events (PGMIGRATE_FAIL ,HPAGE_PMD_NR ); out_dropref: + entry =pmd_mknonnuma (entry); +set_pmd_at (mm, haddr, pmd, entry); +update_mmu_cache_pmd (vma, address, &entry); +unlock_page (page);put_page (page);return 0 ;
mm/mprotect.c +1 -1
@@ -148,7 +148,7 @@ static inline unsigned long change_pmd_range(struct vm_area_struct *vma,split_huge_page_pmd (vma, addr, pmd); else if (change_huge_pmd(vma, pmd, addr, newprot,prot_numa )) { - pages +=HPAGE_PMD_NR ; + pages++;continue ; }/* fall through */
Re: [RFC GIT PULL] NUMA-balancing memory corruption fixes
Quoted 5 lines · Ingo Molnar
( If you think this is too dangerous for too little benefit then
I'll drop this separate tree and will send the original commits in the merge window. )
Ugh. I hate hate hate the timing, and this is much larger and scarier than what I'd like at this point, but I don't see the point to delaying this either.
So I'm pulling them. And then I may end up doing an rc8 after all.
Linus
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC GIT PULL] NUMA-balancing memory corruption fixes
Quoted 10 lines · Linus Torvalds
Quoted 5 lines · Ingo Molnar
( If you think this is too dangerous for too little benefit then
I'll drop this separate tree and will send the original commits in the merge window. )Ugh. I hate hate hate the timing, and this is much larger and scarier than what I'd like at this point, but I don't see the point to delaying this either.
Yeah, it's pretty close to worst-case timing. I tried to accelerate the fixes as much as I dared, I wasn't even back from the KS yet but at another conference, doing all preparation and testing remotely :-/ Still the timing sucks.
Quoted 1 line
So I'm pulling them. And then I may end up doing an rc8 after all.
Thanks for pulling them!
Ingo