ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
From: Fabio Estevam <[email protected]>
Having CONFIG_DEBUG_GPIO=y leads to several debug messages polluting kernel log:
[ 0.580325] of_get_named_gpio_flags: can't parse gpios property of node '/regulators/3p3v[0]' [ 0.581185] 3P3V: 3300 mV [ 0.584827] of_get_named_gpio_flags exited with status 124 [ 0.585852] vddio-sd0: 3300 mV [ 0.590023] of_get_named_gpio_flags exited with status 79 [ 0.590770] fec-3v3: 3300 mV [ 0.594805] of_get_named_gpio_flags exited with status 105 [ 0.595491] usb0_vbus: 5000 mV [ 0.599687] of_get_named_gpio_flags exited with status 104 [ 0.600380] usb1_vbus: 5000 mV [ 0.604463] of_get_named_gpio_flags exited with status 126 [ 0.605153] lcd-3v3: 3300 mV [ 0.608970] of_get_named_gpio_flags exited with status 77
Turn this option off, as these messages are not really useful for normal usage.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/configs/mxs_defconfig | 1 - 1 file changed, 1 deletion(-)
arch/arm/configs/mxs_defconfig +0 -1
@@ -90,7 +90,6 @@ CONFIG_I2C_MXS=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_MXS=y -CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y
Signature · 1 line
1.8.1.2
Shawn Guo
AppliedPATCH 1/1 ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
Quoted 18 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Having
CONFIG_DEBUG_GPIO=yleads to several debug messages polluting kernel log:[ 0.580325] of_get_named_gpio_flags: can't parse gpios property of node '/regulators/3p3v[0]' [ 0.581185] 3P3V: 3300 mV [ 0.584827] of_get_named_gpio_flags exited with status 124 [ 0.585852] vddio-sd0: 3300 mV [ 0.590023] of_get_named_gpio_flags exited with status 79 [ 0.590770] fec-3v3: 3300 mV [ 0.594805] of_get_named_gpio_flags exited with status 105 [ 0.595491] usb0_vbus: 5000 mV [ 0.599687] of_get_named_gpio_flags exited with status 104 [ 0.600380] usb1_vbus: 5000 mV [ 0.604463] of_get_named_gpio_flags exited with status 126 [ 0.605153] lcd-3v3: 3300 mV [ 0.608970] of_get_named_gpio_flags exited with status 77
Quoted 3 lines
Turn this option off, as these messages are not really useful for normal usage.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.