Skip to contentSkip to conversation

i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt

PATCH New Eric Nelson 3 participants 4 messages Oct 9, 2013 – Oct 31, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt

The 6x_upgrade script is used to upgrade U-Boot in SPI-NOR on Nitrogen6x/SABRE Lite boards using U-Boot's 'sf' command.

U-Boot is placed at offset 0x400 in flash, and the script currently only erases 0x50000 bytes. Since the current head is 319k, any additional features enabled in the configuration will exceed the space erased and cause errors re-programming the device.

This patch increases the erase size to the full size of the region allocated for the U-Boot binary.

---
 board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/6x_upgrade.txt +1 -1
index 0d8e8e5..ad3d0b6 100644
@@ -17,7 +17,7 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
                         sleep 1 ;
                    done
 		   echo "erasing" ;
-                   sf erase 0 0x50000 ;
+                   sf erase 0 0xC0000 ;
 		   # two steps to prevent bricking
 		   echo "programming" ;
                    sf write 0x12000000 $offset $filesize ;
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/1 i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt

Quoted 23 lines · Eric Nelson

The 6x_upgrade script is used to upgrade U-Boot in SPI-NOR on Nitrogen6x/SABRE Lite boards using U-Boot's 'sf' command.

U-Boot is placed at offset 0x400 in flash, and the script currently only erases 0x50000 bytes. Since the current head is 319k, any additional features enabled in the configuration will exceed the space erased and cause errors re-programming the device.

This patch increases the erase size to the full size of the region allocated for the U-Boot binary.

---
 board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/6x_upgrade.txt +0 -0
index 0d8e8e5..ad3d0b6 100644

board/boundary/nitrogen6x/6x_upgrade.txt if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk · line 23

Quoted 8 lines
board/boundary/nitrogen6x/6x_upgrade.txt +1 -1
@@ -17,7 +17,7 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
                         sleep 1 ;
                    done
 		   echo "erasing" ;
-                   sf erase 0 0x50000 ;
+                   sf erase 0 0xC0000 ;
 		   # two steps to prevent bricking
 		   echo "programming" ;
                    sf write 0x12000000 $offset $filesize ;

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#2 lore raw

PATCH 1/1 i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt

Quoted 18 lines · Stefano Babic
Quoted 17 lines · Eric Nelson

The 6x_upgrade script is used to upgrade U-Boot in SPI-NOR on Nitrogen6x/SABRE Lite boards using U-Boot's 'sf' command.

U-Boot is placed at offset 0x400 in flash, and the script currently only erases 0x50000 bytes. Since the current head is 319k, any additional features enabled in the configuration will exceed the space erased and cause errors re-programming the device.

This patch increases the erase size to the full size of the region allocated for the U-Boot binary.

---
 board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 16 lines
Quoted 6 lines
board/boundary/nitrogen6x/6x_upgrade.txt +0 -0
index 0d8e8e5..ad3d0b6 100644

board/boundary/nitrogen6x/6x_upgrade.txt if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk · line 23

Quoted 8 lines
board/boundary/nitrogen6x/6x_upgrade.txt +1 -1
@@ -17,7 +17,7 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
                         sleep 1 ;
                    done
                 echo "erasing" ;
-                   sf erase 0 0x50000 ;
+                   sf erase 0 0xC0000 ;
                 # two steps to prevent bricking
                 echo "programming" ;
                    sf write 0x12000000 $offset $filesize ;

This would be good to have into 2013.10 release. Is it still possible?

Signature · 3 lines
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
#3 lore raw

PATCH 1/1 i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt

In reply to Eric Nelson
Quoted 9 lines · Eric Nelson

The 6x_upgrade script is used to upgrade U-Boot in SPI-NOR on Nitrogen6x/SABRE Lite boards using U-Boot's 'sf' command.

U-Boot is placed at offset 0x400 in flash, and the script currently only erases 0x50000 bytes. Since the current head is 319k, any additional features enabled in the configuration will exceed the space erased and cause errors re-programming the device.

Quoted 5 lines

This patch increases the erase size to the full size of the region allocated for the U-Boot binary.

---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================