Skip to contentSkip to conversation

ARM: tegra: enable Tegra RTC as default for Tegra124

PATCH New Joseph Lo 2 participants 2 messages Oct 11, 2013

Subsystems (2)
lore
Share & tools
lore

Joseph Lo

author
#0 lore raw

PATCH 1/1 ARM: tegra: enable Tegra RTC as default for Tegra124

This patch makes the Tegra RTC enabled as default for Tegra124 platform.

---
Note:
This patch was based on the patch "ARM: tegra: add clock properties for devices of Tegra124" that already queued in linux-tegra.

---
 arch/arm/boot/dts/tegra124.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/tegra124.dtsi +0 -1
index 7862024..2207555 100644
@@ -94,7 +94,6 @@
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
Signature · 1 line
1.8.4
#1 lore raw

PATCH 1/1 ARM: tegra: enable Tegra RTC as default for Tegra124

Quoted 1 line · Joseph Lo

This patch makes the Tegra RTC enabled as default for Tegra124 platform.

I've applied this to Tegra's for-3.13/dt branch.

Quoted 3 lines

Note:
This patch was based on the patch "ARM: tegra: add clock properties for devices of Tegra124" that already queued in linux-tegra.

That patch has been posted, but not queued. I can't queue it until Peter's clock series is finalized, since it depends on that.