Add test_sec_options.sh
Subsystems (2)
PATCH 1/1 Add test_sec_options.sh
This script tests the nfs 'sec=' mount option against a server with (possibly) many different exports with different security flavors.
I originally wrote this to test the patch to test my multiple sec= options patch, so set TEST_MULTIPLE_SEC_OPTIONS to something other than "true" to test older kernels.
Most of the config can be passed through as environment variables, but the paths on the remote server and the function to map these paths to the allowed security flavors is not and must be set to what exports the server has defined.
This should be useful as a stand-alone script and as well as a Jenkins test.
--- helper/test_sec_options.sh | 289 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+) create mode 100755 helper/test_sec_options.sh
helper/test_sec_options.sh new file +289 -0
@@ -0,0 +1,289 @@ +#!/bin/sh +# Copyright (c) 2013 Netapp, Inc. All rights reserved +# +# test_sec_options.sh - test NFS mount security options +# by: Weston Andros Adamson <[email protected]> +# + +# +# The example config is for a server (zero) with this /etc/exports: +# +# /export/sys *(sec=sys,rw,no_root_squash) +# /export/krb5a *(sec=krb5,rw,no_root_squash) +# /export/krb5i *(sec=krb5i,rw,no_root_squash) +# /export/krb5p *(sec=krb5p,rw,no_root_squash) +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash) +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash) +# + +# the server to mount +[ -z "$SERVER" ] && SERVER=zero.apikia.fake + +# local mountpoint +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt + +# exports on the server to test - if you add something here, you MUST +# add an entry to path_to_sec_flavors +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip" + +# mapping of path -> space separated list of sec= options +path_to_sec_flavors() { + case $1 in + /export/sys) echo "sys" + ;; + /export/krb5a) echo "krb5" + ;; + /export/krb5i) echo "krb5i" + ;; + /export/krb5p) echo "krb5p" + ;; + /export/krb5ip) echo "krb5i krb5p" + ;; + /export/krb5aip) echo "krb5 krb5i krb5p" + ;; + esac +} + +# test multiple sec= options too? +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true + +# if defined will pause for $RUN_PAUSE seconds between each run +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25 + +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10 + +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1" + +##### END CONFIG #### + +# no v2 or v3 +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g') + +echo "SERVER = $SERVER" +echo "PATHS = $PATHS" +echo "LOCALDIR = $LOCALDIR" +echo "VERSIONS = $VERSIONS" +echo "VERSIONS_V4 = $VERSIONS_V4" +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS" +echo "RUN_PAUSE = $RUN_PAUSE" +echo "GROUP_PAUSE = $GROUP_PAUSE" + +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p" +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p" + +FAILURES=0 +SUCCESSES=0 + +group_pause() { + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then + echo sleeping for $GROUP_PAUSE seconds... + sleep $GROUP_PAUSE + fi +} + +has_mount() { + _res=$(mount | grep $LOCALDIR | grep nfs) + + if [ -n "$_res" ] ; then + return 0 + fi + + return 1 +} + +if has_mount ; then + echo "something else mounted on $LOCALDIR" + exit 1 +fi + +_cancel() { + echo + echo "exiting on SIGINT" + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + done + exit 1 +} + +splitsec() { + echo $* | tr -s ':' ' ' +} + +trap '_cancel' INT + +run() { + _opts="$1" + _server="$2" + _path="$3" + _local="$4" + _expected_result="$5" + _cd="$6" + + if has_mount ; then + echo + echo "something mounted on $LOCALDIR" + exit 1 + fi + + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local" + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1 + _status=$? + + if [ "$_status" = "0" -a -n "$_cd" ]; then + echo -n " && ls $_cd" + sudo ls $_cd > /dev/null 2>&1 + _status=$? + fi + + + echo -n " -> $_status" + + if [ "$_expected_result" = "$_status" ] ; then + echo " [OK]" + SUCCESSES=$(expr $SUCCESSES + 1) + else + echo -n " [FAIL!!]" + echo " --> expected $_expected_result, but got $_status" + FAILURES=$(expr $FAILURES + 1) + fi + + sudo umount $LOCALDIR > /dev/null 2>&1 + + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + sleep 0.1 + done + + # sigh, gssd gets angry + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then + sleep $RUN_PAUSE + fi + + return $_status +} + +echo +echo "single sec= tests" +for vers in $VERSIONS ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done +done + +echo + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "multiple sec= tests" + for vers in $VERSIONS ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done + done +fi + +group_pause + +echo +echo "no sec= tests" +for vers in $VERSIONS ; do + for path in $PATHS; do + run "$vers" $SERVER $path $LOCALDIR 0 + _status=$? + done +done + +group_pause + +echo +echo "v4 secinfo tests" +for vers in $VERSIONS_V4 ; do + for path in $PATHS; do + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path + _status=$? + done +done + +group_pause + +echo +echo "v4.x secinfo with single sec= tests" +for vers in $VERSIONS_V4 ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done +done + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "v4.x secinfo with multiple sec= tests" + for vers in $VERSIONS_V4 ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done + done +fi + +echo +echo "Successfully ran $SUCCESSES tests" +if [ "$FAILURES" != "0" ] ; then + echo + echo "$FAILURES failures!" +fi +exit $FAILURES
Signature · 1 line
1.7.12.4 (Apple Git-37)
For others on the list, this is for the nfs-ordeal repo at:
git://git.linux-nfs.org/~bjschuma/nfs-ordeal.git
http://git.linux-nfs.org/?p=bjschuma/nfs-ordeal.git;a=summary
-dros
Quoted 317 lines · Weston Andros Adamson
This script tests the nfs 'sec=' mount option against a server with (possibly) many different exports with different security flavors.
I originally wrote this to test the patch to test my multiple sec= options patch, so set
TEST_MULTIPLE_SEC_OPTIONSto something other than "true" to test older kernels.Most of the config can be passed through as environment variables, but the paths on the remote server and the function to map these paths to the allowed security flavors is not and must be set to what exports the server has defined.
This should be useful as a stand-alone script and as well as a Jenkins test.
Signed-off-by Weston Andros Adamson <[email protected]>---
helper/test_sec_options.sh| 289 +++++++++++++++++++++++++++++++++++++++++++++1 file changed, 289 insertions(+)create mode 100755
helper/test_sec_options.shhelper/test_sec_options.sh new file +289
-0@@ -0,0 +1,289 @@ +#!/bin/sh +# Copyright (c) 2013 Netapp, Inc. All rights reserved +# +# test_sec_options.sh - test NFS mount security options +# by: Weston Andros Adamson <[email protected]> +# + +# +# The example config is for a server (zero) with this /etc/exports: +# +# /export/sys *(sec=sys,rw,no_root_squash) +# /export/krb5a *(sec=krb5,rw,no_root_squash) +# /export/krb5i *(sec=krb5i,rw,no_root_squash) +# /export/krb5p *(sec=krb5p,rw,no_root_squash) +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash) +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash) +# + +# the server to mount +[ -z "$SERVER" ] && SERVER=zero.apikia.fake + +# local mountpoint +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt + +# exports on the server to test - if you add something here, you MUST +# add an entry to path_to_sec_flavors +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip" + +# mapping of path -> space separated list of sec= options +path_to_sec_flavors() { + case $1 in + /export/sys) echo "sys" + ;; + /export/krb5a) echo "krb5" + ;; + /export/krb5i) echo "krb5i" + ;; + /export/krb5p) echo "krb5p" + ;; + /export/krb5ip) echo "krb5i krb5p" + ;; + /export/krb5aip) echo "krb5 krb5i krb5p" + ;; + esac +} + +# test multiple sec= options too? +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true + +# if defined will pause for $RUN_PAUSE seconds between each run +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25 + +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10 + +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1" + +##### END CONFIG #### + +# no v2 or v3 +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g') + +echo "SERVER = $SERVER" +echo "PATHS = $PATHS" +echo "LOCALDIR = $LOCALDIR" +echo "VERSIONS = $VERSIONS" +echo "VERSIONS_V4 = $VERSIONS_V4" +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS" +echo "RUN_PAUSE = $RUN_PAUSE" +echo "GROUP_PAUSE = $GROUP_PAUSE" + +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p" +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p" + +FAILURES=0 +SUCCESSES=0 + +group_pause() { + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then + echo sleeping for $GROUP_PAUSE seconds... + sleep $GROUP_PAUSE + fi +} + +has_mount() { + _res=$(mount | grep $LOCALDIR | grep nfs) + + if [ -n "$_res" ] ; then + return 0 + fi + + return 1 +} + +if has_mount ; then + echo "something else mounted on $LOCALDIR" + exit 1 +fi + +_cancel() { + echo + echo "exiting on SIGINT" + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + done + exit 1 +} + +splitsec() { + echo $* | tr -s ':' ' ' +} + +trap '_cancel' INT + +run() { + _opts="$1" + _server="$2" + _path="$3" + _local="$4" + _expected_result="$5" + _cd="$6" + + if has_mount ; then + echo + echo "something mounted on $LOCALDIR" + exit 1 + fi + + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local" + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1 + _status=$? + + if [ "$_status" = "0" -a -n "$_cd" ]; then + echo -n " && ls $_cd" + sudo ls $_cd > /dev/null 2>&1 + _status=$? + fi + + + echo -n " -> $_status" + + if [ "$_expected_result" = "$_status" ] ; then + echo " [OK]" + SUCCESSES=$(expr $SUCCESSES + 1) + else + echo -n " [FAIL!!]" + echo " --> expected $_expected_result, but got $_status" + FAILURES=$(expr $FAILURES + 1) + fi + + sudo umount $LOCALDIR > /dev/null 2>&1 + + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + sleep 0.1 + done + + # sigh, gssd gets angry + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then + sleep $RUN_PAUSE + fi + + return $_status +} + +echo +echo "single sec= tests" +for vers in $VERSIONS ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done +done + +echo + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "multiple sec= tests" + for vers in $VERSIONS ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done + done +fi + +group_pause + +echo +echo "no sec= tests" +for vers in $VERSIONS ; do + for path in $PATHS; do + run "$vers" $SERVER $path $LOCALDIR 0 + _status=$? + done +done + +group_pause + +echo +echo "v4 secinfo tests" +for vers in $VERSIONS_V4 ; do + for path in $PATHS; do + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path + _status=$? + done +done + +group_pause + +echo +echo "v4.x secinfo with single sec= tests" +for vers in $VERSIONS_V4 ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done +done + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "v4.x secinfo with multiple sec= tests" + for vers in $VERSIONS_V4 ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done + done +fi + +echo +echo "Successfully ran $SUCCESSES tests" +if [ "$FAILURES" != "0" ] ; then + echo + echo "$FAILURES failures!" +fi +exit $FAILURESSignature · 1 line
1.7.12.4 (Apple Git-37)
Quoted 10 lines · Weston Andros Adamson
This script tests the nfs 'sec=' mount option against a server with (possibly) many different exports with different security flavors.
I originally wrote this to test the patch to test my multiple sec= options patch, so set
TEST_MULTIPLE_SEC_OPTIONSto something other than "true" to test older kernels.Most of the config can be passed through as environment variables, but the paths on the remote server and the function to map these paths to the allowed security flavors is not and must be set to what exports the server has defined.
What are the benefits to passing the config through environment variables instead of using command line parameters (getopt or similar)?
Anna
Quoted 304 lines
This should be useful as a stand-alone script and as well as a Jenkins test.
Signed-off-by Weston Andros Adamson <[email protected]>--- helper/test_sec_options.sh | 289 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+) create mode 100755 helper/test_sec_options.shhelper/test_sec_options.sh new file +289
-0@@ -0,0 +1,289 @@ +#!/bin/sh +# Copyright (c) 2013 Netapp, Inc. All rights reserved +# +# test_sec_options.sh - test NFS mount security options +# by: Weston Andros Adamson <[email protected]> +# + +# +# The example config is for a server (zero) with this /etc/exports: +# +# /export/sys *(sec=sys,rw,no_root_squash) +# /export/krb5a *(sec=krb5,rw,no_root_squash) +# /export/krb5i *(sec=krb5i,rw,no_root_squash) +# /export/krb5p *(sec=krb5p,rw,no_root_squash) +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash) +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash) +# + +# the server to mount +[ -z "$SERVER" ] && SERVER=zero.apikia.fake + +# local mountpoint +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt + +# exports on the server to test - if you add something here, you MUST +# add an entry to path_to_sec_flavors +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip" + +# mapping of path -> space separated list of sec= options +path_to_sec_flavors() { + case $1 in + /export/sys) echo "sys" + ;; + /export/krb5a) echo "krb5" + ;; + /export/krb5i) echo "krb5i" + ;; + /export/krb5p) echo "krb5p" + ;; + /export/krb5ip) echo "krb5i krb5p" + ;; + /export/krb5aip) echo "krb5 krb5i krb5p" + ;; + esac +} + +# test multiple sec= options too? +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true + +# if defined will pause for $RUN_PAUSE seconds between each run +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25 + +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10 + +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1" + +##### END CONFIG #### + +# no v2 or v3 +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g') + +echo "SERVER = $SERVER" +echo "PATHS = $PATHS" +echo "LOCALDIR = $LOCALDIR" +echo "VERSIONS = $VERSIONS" +echo "VERSIONS_V4 = $VERSIONS_V4" +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS" +echo "RUN_PAUSE = $RUN_PAUSE" +echo "GROUP_PAUSE = $GROUP_PAUSE" + +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p" +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p" + +FAILURES=0 +SUCCESSES=0 + +group_pause() { + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then + echo sleeping for $GROUP_PAUSE seconds... + sleep $GROUP_PAUSE + fi +} + +has_mount() { + _res=$(mount | grep $LOCALDIR | grep nfs) + + if [ -n "$_res" ] ; then + return 0 + fi + + return 1 +} + +if has_mount ; then + echo "something else mounted on $LOCALDIR" + exit 1 +fi + +_cancel() { + echo + echo "exiting on SIGINT" + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + done + exit 1 +} + +splitsec() { + echo $* | tr -s ':' ' ' +} + +trap '_cancel' INT + +run() { + _opts="$1" + _server="$2" + _path="$3" + _local="$4" + _expected_result="$5" + _cd="$6" + + if has_mount ; then + echo + echo "something mounted on $LOCALDIR" + exit 1 + fi + + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local" + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1 + _status=$? + + if [ "$_status" = "0" -a -n "$_cd" ]; then + echo -n " && ls $_cd" + sudo ls $_cd > /dev/null 2>&1 + _status=$? + fi + + + echo -n " -> $_status" + + if [ "$_expected_result" = "$_status" ] ; then + echo " [OK]" + SUCCESSES=$(expr $SUCCESSES + 1) + else + echo -n " [FAIL!!]" + echo " --> expected $_expected_result, but got $_status" + FAILURES=$(expr $FAILURES + 1) + fi + + sudo umount $LOCALDIR > /dev/null 2>&1 + + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + sleep 0.1 + done + + # sigh, gssd gets angry + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then + sleep $RUN_PAUSE + fi + + return $_status +} + +echo +echo "single sec= tests" +for vers in $VERSIONS ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done +done + +echo + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "multiple sec= tests" + for vers in $VERSIONS ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done + done +fi + +group_pause + +echo +echo "no sec= tests" +for vers in $VERSIONS ; do + for path in $PATHS; do + run "$vers" $SERVER $path $LOCALDIR 0 + _status=$? + done +done + +group_pause + +echo +echo "v4 secinfo tests" +for vers in $VERSIONS_V4 ; do + for path in $PATHS; do + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path + _status=$? + done +done + +group_pause + +echo +echo "v4.x secinfo with single sec= tests" +for vers in $VERSIONS_V4 ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done +done + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "v4.x secinfo with multiple sec= tests" + for vers in $VERSIONS_V4 ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done + done +fi + +echo +echo "Successfully ran $SUCCESSES tests" +if [ "$FAILURES" != "0" ] ; then + echo + echo "$FAILURES failures!" +fi +exit $FAILURES
Quoted 8 lines · Anna Schumaker
Quoted 7 lines · Weston Andros Adamson
This script tests the nfs 'sec=' mount option against a server with (possibly) many different exports with different security flavors.
I originally wrote this to test the patch to test my multiple sec= options patch, so set
TEST_MULTIPLE_SEC_OPTIONSto something other than "true" to test older kernels.
Quoted 8 lines
Quoted 3 lines
Most of the config can be passed through as environment variables, but the paths on the remote server and the function to map these paths to the allowed security flavors is not and must be set to what exports the server has defined.
What are the benefits to passing the config through environment variables instead of using command line parameters (getopt or similar)?
Anna
Well, the main benefit is that it's already written and both solutions are functionally equivalent.
The reason I went with environment variables over using command line arguments is that some of the config cannot be passed easily as either - the server's export list and mapping to security flavors must be specified by editing the script (I *guess* you could pass a function/script that maps these but… ewww). The jenkins use of the script can just assume a standard export mapping, but when run by hand the user will probably need to update these. If there are command line arguments and a usage() error path it would lead users to believe that's how the script is intended to run, but it is not.
So, passing any arguments to this script is a hack for jenkins. It's ok since you control the exports on the server(s) for the jenkins setup, but for stand-alone use (one of the goals in sharing this script) it makes little sense.
Why does this matter to you? FYI, you don't need getopt with shell scripts, you can instead use $[0-9] (see also "shift" and $#). If you must pass as command line arguments, just write a little wrapper.
-dros
Quoted 307 lines
Quoted 305 lines
This should be useful as a stand-alone script and as well as a Jenkins test.
Signed-off-by Weston Andros Adamson <[email protected]>---
helper/test_sec_options.sh| 289 +++++++++++++++++++++++++++++++++++++++++++++1 file changed, 289 insertions(+)create mode 100755
helper/test_sec_options.shhelper/test_sec_options.sh new file +289
-0@@ -0,0 +1,289 @@ +#!/bin/sh +# Copyright (c) 2013 Netapp, Inc. All rights reserved +# +# test_sec_options.sh - test NFS mount security options +# by: Weston Andros Adamson <[email protected]> +# + +# +# The example config is for a server (zero) with this /etc/exports: +# +# /export/sys *(sec=sys,rw,no_root_squash) +# /export/krb5a *(sec=krb5,rw,no_root_squash) +# /export/krb5i *(sec=krb5i,rw,no_root_squash) +# /export/krb5p *(sec=krb5p,rw,no_root_squash) +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash) +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash) +# + +# the server to mount +[ -z "$SERVER" ] && SERVER=zero.apikia.fake + +# local mountpoint +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt + +# exports on the server to test - if you add something here, you MUST +# add an entry to path_to_sec_flavors +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip" + +# mapping of path -> space separated list of sec= options +path_to_sec_flavors() { + case $1 in + /export/sys) echo "sys" + ;; + /export/krb5a) echo "krb5" + ;; + /export/krb5i) echo "krb5i" + ;; + /export/krb5p) echo "krb5p" + ;; + /export/krb5ip) echo "krb5i krb5p" + ;; + /export/krb5aip) echo "krb5 krb5i krb5p" + ;; + esac +} + +# test multiple sec= options too? +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true + +# if defined will pause for $RUN_PAUSE seconds between each run +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25 + +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10 + +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1" + +##### END CONFIG #### + +# no v2 or v3 +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g') + +echo "SERVER = $SERVER" +echo "PATHS = $PATHS" +echo "LOCALDIR = $LOCALDIR" +echo "VERSIONS = $VERSIONS" +echo "VERSIONS_V4 = $VERSIONS_V4" +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS" +echo "RUN_PAUSE = $RUN_PAUSE" +echo "GROUP_PAUSE = $GROUP_PAUSE" + +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p" +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p" + +FAILURES=0 +SUCCESSES=0 + +group_pause() { + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then + echo sleeping for $GROUP_PAUSE seconds... + sleep $GROUP_PAUSE + fi +} + +has_mount() { + _res=$(mount | grep $LOCALDIR | grep nfs) + + if [ -n "$_res" ] ; then + return 0 + fi + + return 1 +} + +if has_mount ; then + echo "something else mounted on $LOCALDIR" + exit 1 +fi + +_cancel() { + echo + echo "exiting on SIGINT" + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + done + exit 1 +} + +splitsec() { + echo $* | tr -s ':' ' ' +} + +trap '_cancel' INT + +run() { + _opts="$1" + _server="$2" + _path="$3" + _local="$4" + _expected_result="$5" + _cd="$6" + + if has_mount ; then + echo + echo "something mounted on $LOCALDIR" + exit 1 + fi + + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local" + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1 + _status=$? + + if [ "$_status" = "0" -a -n "$_cd" ]; then + echo -n " && ls $_cd" + sudo ls $_cd > /dev/null 2>&1 + _status=$? + fi + + + echo -n " -> $_status" + + if [ "$_expected_result" = "$_status" ] ; then + echo " [OK]" + SUCCESSES=$(expr $SUCCESSES + 1) + else + echo -n " [FAIL!!]" + echo " --> expected $_expected_result, but got $_status" + FAILURES=$(expr $FAILURES + 1) + fi + + sudo umount $LOCALDIR > /dev/null 2>&1 + + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + sleep 0.1 + done + + # sigh, gssd gets angry + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then + sleep $RUN_PAUSE + fi + + return $_status +} + +echo +echo "single sec= tests" +for vers in $VERSIONS ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done +done + +echo + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "multiple sec= tests" + for vers in $VERSIONS ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done + done +fi + +group_pause + +echo +echo "no sec= tests" +for vers in $VERSIONS ; do + for path in $PATHS; do + run "$vers" $SERVER $path $LOCALDIR 0 + _status=$? + done +done + +group_pause + +echo +echo "v4 secinfo tests" +for vers in $VERSIONS_V4 ; do + for path in $PATHS; do + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path + _status=$? + done +done + +group_pause + +echo +echo "v4.x secinfo with single sec= tests" +for vers in $VERSIONS_V4 ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done +done + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "v4.x secinfo with multiple sec= tests" + for vers in $VERSIONS_V4 ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done + done +fi + +echo +echo "Successfully ran $SUCCESSES tests" +if [ "$FAILURES" != "0" ] ; then + echo + echo "$FAILURES failures!" +fi +exit $FAILURES
Quoted 17 lines · Weston Andros Adamson
Quoted 15 lines · Anna Schumaker
Quoted 10 lines · Weston Andros Adamson
This script tests the nfs 'sec=' mount option against a server with (possibly) many different exports with different security flavors.
I originally wrote this to test the patch to test my multiple sec= options patch, so set
TEST_MULTIPLE_SEC_OPTIONSto something other than "true" to test older kernels.Most of the config can be passed through as environment variables, but the paths on the remote server and the function to map these paths to the allowed security flavors is not and must be set to what exports the server has defined.
What are the benefits to passing the config through environment variables instead of using command line parameters (getopt or similar)?
Quoted 7 lines
Quoted 1 line
Anna
Well, the main benefit is that it's already written and both solutions are functionally equivalent.
The reason I went with environment variables over using command line arguments is that some of the config cannot be passed easily as either - the server's export list and mapping to security flavors must be specified by editing the script (I *guess* you could pass a function/script that maps these but… ewww). The jenkins use of the script can just assume a standard export mapping, but when run by hand the user will probably need to update these. If there are command line arguments and a
usage()error path it would lead users to believe that's how the script is intended to run, but it is not.So, passing any arguments to this script is a hack for jenkins. It's ok since you control the exports on the server(s) for the jenkins setup, but for stand-alone use (one of the goals in sharing this script) it makes little sense.
Fair enough.
Quoted 2 lines
Why does this matter to you? FYI, you don't need getopt with shell scripts, you can instead use $[0-9] (see also "shift" and $#). If you must pass as command line arguments, just write a little wrapper.
I was just curious. I've been using getopt since I think it makes running scripts over ssh a bit easier to debug, but we can keep it this way. Thanks for the patch!
Anna
Quoted 311 lines
-dros
Quoted 307 lines
Quoted 305 lines
This should be useful as a stand-alone script and as well as a Jenkins test.
Signed-off-by Weston Andros Adamson <[email protected]>---
helper/test_sec_options.sh| 289 +++++++++++++++++++++++++++++++++++++++++++++1 file changed, 289 insertions(+)create mode 100755
helper/test_sec_options.shhelper/test_sec_options.sh new file +289
-0@@ -0,0 +1,289 @@ +#!/bin/sh +# Copyright (c) 2013 Netapp, Inc. All rights reserved +# +# test_sec_options.sh - test NFS mount security options +# by: Weston Andros Adamson <[email protected]> +# + +# +# The example config is for a server (zero) with this /etc/exports: +# +# /export/sys *(sec=sys,rw,no_root_squash) +# /export/krb5a *(sec=krb5,rw,no_root_squash) +# /export/krb5i *(sec=krb5i,rw,no_root_squash) +# /export/krb5p *(sec=krb5p,rw,no_root_squash) +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash) +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash) +# + +# the server to mount +[ -z "$SERVER" ] && SERVER=zero.apikia.fake + +# local mountpoint +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt + +# exports on the server to test - if you add something here, you MUST +# add an entry to path_to_sec_flavors +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip" + +# mapping of path -> space separated list of sec= options +path_to_sec_flavors() { + case $1 in + /export/sys) echo "sys" + ;; + /export/krb5a) echo "krb5" + ;; + /export/krb5i) echo "krb5i" + ;; + /export/krb5p) echo "krb5p" + ;; + /export/krb5ip) echo "krb5i krb5p" + ;; + /export/krb5aip) echo "krb5 krb5i krb5p" + ;; + esac +} + +# test multiple sec= options too? +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true + +# if defined will pause for $RUN_PAUSE seconds between each run +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25 + +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10 + +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1" + +##### END CONFIG #### + +# no v2 or v3 +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g') + +echo "SERVER = $SERVER" +echo "PATHS = $PATHS" +echo "LOCALDIR = $LOCALDIR" +echo "VERSIONS = $VERSIONS" +echo "VERSIONS_V4 = $VERSIONS_V4" +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS" +echo "RUN_PAUSE = $RUN_PAUSE" +echo "GROUP_PAUSE = $GROUP_PAUSE" + +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p" +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p" + +FAILURES=0 +SUCCESSES=0 + +group_pause() { + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then + echo sleeping for $GROUP_PAUSE seconds... + sleep $GROUP_PAUSE + fi +} + +has_mount() { + _res=$(mount | grep $LOCALDIR | grep nfs) + + if [ -n "$_res" ] ; then + return 0 + fi + + return 1 +} + +if has_mount ; then + echo "something else mounted on $LOCALDIR" + exit 1 +fi + +_cancel() { + echo + echo "exiting on SIGINT" + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + done + exit 1 +} + +splitsec() { + echo $* | tr -s ':' ' ' +} + +trap '_cancel' INT + +run() { + _opts="$1" + _server="$2" + _path="$3" + _local="$4" + _expected_result="$5" + _cd="$6" + + if has_mount ; then + echo + echo "something mounted on $LOCALDIR" + exit 1 + fi + + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local" + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1 + _status=$? + + if [ "$_status" = "0" -a -n "$_cd" ]; then + echo -n " && ls $_cd" + sudo ls $_cd > /dev/null 2>&1 + _status=$? + fi + + + echo -n " -> $_status" + + if [ "$_expected_result" = "$_status" ] ; then + echo " [OK]" + SUCCESSES=$(expr $SUCCESSES + 1) + else + echo -n " [FAIL!!]" + echo " --> expected $_expected_result, but got $_status" + FAILURES=$(expr $FAILURES + 1) + fi + + sudo umount $LOCALDIR > /dev/null 2>&1 + + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + sleep 0.1 + done + + # sigh, gssd gets angry + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then + sleep $RUN_PAUSE + fi + + return $_status +} + +echo +echo "single sec= tests" +for vers in $VERSIONS ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done +done + +echo + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "multiple sec= tests" + for vers in $VERSIONS ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done + done +fi + +group_pause + +echo +echo "no sec= tests" +for vers in $VERSIONS ; do + for path in $PATHS; do + run "$vers" $SERVER $path $LOCALDIR 0 + _status=$? + done +done + +group_pause + +echo +echo "v4 secinfo tests" +for vers in $VERSIONS_V4 ; do + for path in $PATHS; do + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path + _status=$? + done +done + +group_pause + +echo +echo "v4.x secinfo with single sec= tests" +for vers in $VERSIONS_V4 ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done +done + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "v4.x secinfo with multiple sec= tests" + for vers in $VERSIONS_V4 ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done + done +fi + +echo +echo "Successfully ran $SUCCESSES tests" +if [ "$FAILURES" != "0" ] ; then + echo + echo "$FAILURES failures!" +fi +exit $FAILURES
Quoted 29 lines · Anna Schumaker
Quoted 17 lines · Weston Andros Adamson
Quoted 15 lines · Anna Schumaker
Quoted 10 lines · Weston Andros Adamson
This script tests the nfs 'sec=' mount option against a server with (possibly) many different exports with different security flavors.
I originally wrote this to test the patch to test my multiple sec= options patch, so set
TEST_MULTIPLE_SEC_OPTIONSto something other than "true" to test older kernels.Most of the config can be passed through as environment variables, but the paths on the remote server and the function to map these paths to the allowed security flavors is not and must be set to what exports the server has defined.
What are the benefits to passing the config through environment variables instead of using command line parameters (getopt or similar)?
Quoted 7 lines
Quoted 1 line
Anna
Well, the main benefit is that it's already written and both solutions are functionally equivalent.
The reason I went with environment variables over using command line arguments is that some of the config cannot be passed easily as either - the server's export list and mapping to security flavors must be specified by editing the script (I *guess* you could pass a function/script that maps these but… ewww). The jenkins use of the script can just assume a standard export mapping, but when run by hand the user will probably need to update these. If there are command line arguments and a
usage()error path it would lead users to believe that's how the script is intended to run, but it is not.So, passing any arguments to this script is a hack for jenkins. It's ok since you control the exports on the server(s) for the jenkins setup, but for stand-alone use (one of the goals in sharing this script) it makes little sense.
Fair enough.
Quoted 1 line
Quoted 7 lines
Quoted 1 line
Why does this matter to you? FYI, you don't need getopt with shell scripts, you can instead use $[0-9] (see also "shift" and $#). If you must pass as command line arguments, just write a little wrapper.
I was just curious. I've been using getopt since I think it makes running scripts over ssh a bit easier to debug, but we can keep it this way. Thanks for the patch!
Anna
Oh I think understand what you meant about getopt - you'd like (short and/or long) named variables. That leads to another reason not to do it: most of the script would then be parsing and setting options, but oh by the way you still have to manually edit the script.
I think you should just call "env SERVER=<server> VERSION=<version> $PATH_TO_UTIL_DIR/test_sec_options.sh" or something similar.
-dros
Quoted 313 lines
Quoted 311 lines
-dros
Quoted 307 lines
Quoted 305 lines
This should be useful as a stand-alone script and as well as a Jenkins test.
Signed-off-by Weston Andros Adamson <[email protected]>---
helper/test_sec_options.sh| 289 +++++++++++++++++++++++++++++++++++++++++++++1 file changed, 289 insertions(+)create mode 100755
helper/test_sec_options.shhelper/test_sec_options.sh new file +289
-0@@ -0,0 +1,289 @@ +#!/bin/sh +# Copyright (c) 2013 Netapp, Inc. All rights reserved +# +# test_sec_options.sh - test NFS mount security options +# by: Weston Andros Adamson <[email protected]> +# + +# +# The example config is for a server (zero) with this /etc/exports: +# +# /export/sys *(sec=sys,rw,no_root_squash) +# /export/krb5a *(sec=krb5,rw,no_root_squash) +# /export/krb5i *(sec=krb5i,rw,no_root_squash) +# /export/krb5p *(sec=krb5p,rw,no_root_squash) +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash) +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash) +# + +# the server to mount +[ -z "$SERVER" ] && SERVER=zero.apikia.fake + +# local mountpoint +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt + +# exports on the server to test - if you add something here, you MUST +# add an entry to path_to_sec_flavors +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip" + +# mapping of path -> space separated list of sec= options +path_to_sec_flavors() { + case $1 in + /export/sys) echo "sys" + ;; + /export/krb5a) echo "krb5" + ;; + /export/krb5i) echo "krb5i" + ;; + /export/krb5p) echo "krb5p" + ;; + /export/krb5ip) echo "krb5i krb5p" + ;; + /export/krb5aip) echo "krb5 krb5i krb5p" + ;; + esac +} + +# test multiple sec= options too? +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true + +# if defined will pause for $RUN_PAUSE seconds between each run +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25 + +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10 + +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1" + +##### END CONFIG #### + +# no v2 or v3 +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g') + +echo "SERVER = $SERVER" +echo "PATHS = $PATHS" +echo "LOCALDIR = $LOCALDIR" +echo "VERSIONS = $VERSIONS" +echo "VERSIONS_V4 = $VERSIONS_V4" +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS" +echo "RUN_PAUSE = $RUN_PAUSE" +echo "GROUP_PAUSE = $GROUP_PAUSE" + +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p" +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p" + +FAILURES=0 +SUCCESSES=0 + +group_pause() { + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then + echo sleeping for $GROUP_PAUSE seconds... + sleep $GROUP_PAUSE + fi +} + +has_mount() { + _res=$(mount | grep $LOCALDIR | grep nfs) + + if [ -n "$_res" ] ; then + return 0 + fi + + return 1 +} + +if has_mount ; then + echo "something else mounted on $LOCALDIR" + exit 1 +fi + +_cancel() { + echo + echo "exiting on SIGINT" + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + done + exit 1 +} + +splitsec() { + echo $* | tr -s ':' ' ' +} + +trap '_cancel' INT + +run() { + _opts="$1" + _server="$2" + _path="$3" + _local="$4" + _expected_result="$5" + _cd="$6" + + if has_mount ; then + echo + echo "something mounted on $LOCALDIR" + exit 1 + fi + + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local" + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1 + _status=$? + + if [ "$_status" = "0" -a -n "$_cd" ]; then + echo -n " && ls $_cd" + sudo ls $_cd > /dev/null 2>&1 + _status=$? + fi + + + echo -n " -> $_status" + + if [ "$_expected_result" = "$_status" ] ; then + echo " [OK]" + SUCCESSES=$(expr $SUCCESSES + 1) + else + echo -n " [FAIL!!]" + echo " --> expected $_expected_result, but got $_status" + FAILURES=$(expr $FAILURES + 1) + fi + + sudo umount $LOCALDIR > /dev/null 2>&1 + + while has_mount ; do + sudo umount $LOCALDIR > /dev/null 2>&1 + sleep 0.1 + done + + # sigh, gssd gets angry + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then + sleep $RUN_PAUSE + fi + + return $_status +} + +echo +echo "single sec= tests" +for vers in $VERSIONS ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done +done + +echo + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "multiple sec= tests" + for vers in $VERSIONS ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=32 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result + _status=$? + + done + done + done +fi + +group_pause + +echo +echo "no sec= tests" +for vers in $VERSIONS ; do + for path in $PATHS; do + run "$vers" $SERVER $path $LOCALDIR 0 + _status=$? + done +done + +group_pause + +echo +echo "v4 secinfo tests" +for vers in $VERSIONS_V4 ; do + for path in $PATHS; do + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path + _status=$? + done +done + +group_pause + +echo +echo "v4.x secinfo with single sec= tests" +for vers in $VERSIONS_V4 ; do + for sec in $SINGLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + if [ "$pathsec" = "$sec" ]; then + # should work! + _expected_result=0 + fi + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done +done + +group_pause + +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then + echo + echo "v4.x secinfo with multiple sec= tests" + for vers in $VERSIONS_V4 ; do + for sec in $MULTIPLE_SEC_OPTIONS ; do + for path in $PATHS; do + _expected_result=2 + for pathsec in $(path_to_sec_flavors $path) ; do + for thissec in $(splitsec $sec) ; do + if [ "$pathsec" = "$thissec" ]; then + # should work! + _expected_result=0 + fi + done + done + + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path + _status=$? + + done + done + done +fi + +echo +echo "Successfully ran $SUCCESSES tests" +if [ "$FAILURES" != "0" ] ; then + echo + echo "$FAILURES failures!" +fi +exit $FAILURES