Devicetree description for Voipac i.MX53 module
Subsystems (3)
v2 cover Devicetree description for Voipac i.MX53 module
This patchset adds devicetree description for Voipac X53-DMM-668 module which uses i.MX53 CPU. More information about the module may be found at:
http://www.voipac.com/#X53-DMM-668
The support for the baseboard used with this module is also provided. More information about the baseboard: http://www.voipac.com/#X25-BSB-000
Working peripherals are:
* UART0
* Ethernet
* Buttons (with keyboard controller)
* Sound (headphone output)
* SD-card
* LEDs (through GPIOs)
* i2c1, i2c3
* ecspi1
Changes since v1:
* Minor fixes according to comments by Shawn Guo
Rostislav Lisovy (2):
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668
module
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx53-voipac-bsb.dts | 135 +++++++++++++++++++ arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 193 +++++++++++++++++++++++++++ 3 files changed, 329 insertions(+) create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
Signature · 1 line
1.7.10.4
PATCH v2 1/2 ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
Enable uart1, ecspi1, i2c1, FEC and PMIC
create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi new file +193 -0
@@ -0,0 +1,193 @@ +/* + * Copyright 2013 Rostislav Lisovy <[email protected]>, PiKRON s.r.o. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx53.dtsi" + +/ { + model = "Voipac i.MX53 X53-DMM-668"; + compatible = "vp,imx53-dmm-668", "fsl,imx53"; + + memory at 70000000 { + device_type = "memory"; + reg = <0x70000000 0x20000000>; + }; + + memory at b0000000 { + device_type = "memory"; + reg = <0xb0000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + /* Make DA9053 regulator functional */ + MX53_PAD_GPIO_16__GPIO7_11 0x80000000 + /* FEC Power enable */ + MX53_PAD_GPIO_11__GPIO4_1 0x80000000 + /* FEC RST */ + MX53_PAD_GPIO_12__GPIO4_2 0x80000000 + >; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <4>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio4 2 0>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_2>; + status = "okay"; + + pmic: dialog at 48 { + compatible = "dlg,da9053-aa", "dlg,da9052"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ + + regulators { + buck1_reg: buck1 { + regulator-name = "BUCKCORE"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "BUCKPRO"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "BUCKMEM"; + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1580000>; + regulator-always-on; + }; + + buck4_reg: buck4 { + regulator-name = "BUCKPERI"; + regulator-min-microvolt = <2370000>; + regulator-max-microvolt = <2630000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1_1v3"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2_1v3"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3_3v3"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3350000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4_2v775"; + regulator-min-microvolt = <2770000>; + regulator-max-microvolt = <2780000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5_3v3"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3350000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6_1v3"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7_2v75"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8_1v8"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9_1v5"; + regulator-min-microvolt = <1450000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + ldo10_reg: ldo10 { + regulator-name = "ldo10_1v3"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +};
Signature · 1 line
1.7.10.4
PATCH v2 2/2 ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
In reply to Rostislav LisovySupported peripherals: Audio -- headphone output, LEDs, Buttons (using keyboard controller), SD-card.
create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ + imx53-voipac-bsb.dts \ imx6dl-sabreauto.dtb \ imx6dl-sabresd.dtb \ imx6dl-wandboard.dtb \
arch/arm/boot/dts/imx53-voipac-bsb.dts new file +135 -0
135 lines not on this page · raw message
Signature · 1 line
1.7.10.4