ath9k: Remove pcieSerDesWrite
PATCH 1/1 ath9k: Remove pcieSerDesWrite
From: Sujith Manoharan <[email protected]>
This HW config option is always set to true and is not needed.
Signed-off-by Sujith Manoharan <[email protected]>
--- drivers/net/wireless/ath/ath9k/ar9003_hw.c | 20 +++++++++----------- drivers/net/wireless/ath/ath9k/hw.c | 1 - drivers/net/wireless/ath/ath9k/hw.h | 1 - 3 files changed, 9 insertions(+), 13 deletions(-)
drivers/net/wireless/ath/ath9k/ar9003_hw.c +9 -11
@@ -754,6 +754,9 @@ static void ar9003_hw_init_mode_gain_regs(struct ath_hw *ah)static void ar9003_hw_configpcipowersave (struct ath_hw *ah,bool power_off) { +unsigned int i; +struct ar5416IniArray *array; +/* * Increase L1 Entry Latency. Some WB222 boards don't have * this change in eeprom/OTP.
@@ -779,18 +782,13 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah,* Configire PCIE after Ini init. SERDES values now come from ini file * This enables PCIe low power mode. */ -if (ah->config.pcieSerDesWrite) { -unsigned int i; -struct ar5416IniArray *array; - - array = power_off ? &ah->iniPcieSerdes : - &ah->iniPcieSerdesLowPower; + array = power_off ? &ah->iniPcieSerdes : + &ah->iniPcieSerdesLowPower; -for (i =0 ; i < array->ia_rows; i++) { -REG_WRITE (ah, -INI_RA (array, i,0 ), -INI_RA (array, i,1 )); - } +for (i =0 ; i < array->ia_rows; i++) { +REG_WRITE (ah, +INI_RA (array, i,0 ), +INI_RA (array, i,1 )); } }
drivers/net/wireless/ath/ath9k/hw.c +0 -1
@@ -454,7 +454,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah) } ah->config.rx_intr_mitigation = true; - ah->config.pcieSerDesWrite = true;/* * We need this for PCI devices only (Cardbus, PCI, miniPCI)
drivers/net/wireless/ath/ath9k/hw.h +0 -1
@@ -283,7 +283,6 @@ struct ath9k_ops_config {int additional_swba_backoff;int ack_6mb;u32 cwm_ignore_extcca; -bool pcieSerDesWrite;u8 pcie_clock_req;u32 pcie_waen;u8 analog_shiftreg;
Signature · 1 line
1.8.4.1