Skip to contentSkip to conversation

DT: Add basic support for imx35-based devices.

PATCH Superseded Denis Carikli 1 participant 3 messages Oct 30, 2013

Subsystems (6)

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v6 1/3 DT: Add basic support for imx35-based devices.

From: Steffen Trumtrar <[email protected]>

Cc Rob Herring <[email protected]>
Cc Pawel Moll <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Stephen Warren <[email protected]>
Cc Ian Campbell <[email protected]>
Cc devicetree at vger.kernel.org
Cc Russell King <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Shawn Guo <[email protected]>
Cc linux-arm-kernel at lists.infradead.org
Cc Eric B?nard <[email protected]>

---
ChangeLog v5->v6:
- The dependency on pdata clocks has been removed,
and the dtsi adapted accordinly.
- Adaptation to the for-next branch of Shawn Guo at
git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
- imx35-dt.c: very small whitespace cleanup.
- Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed.
- dtsi: The nodes were reordered alphabetically.
- dtsi: The aliases have been reordered alphabetically.
- Shawn Guo was added in the Cc.

---
 .../devicetree/bindings/clock/imx35-clock.txt      |  115 +++++
 arch/arm/boot/dts/imx35.dtsi                       |  451 ++++++++++++++++++++
 arch/arm/mach-imx/Kconfig                          |    9 +
 arch/arm/mach-imx/Makefile                         |    1 +
 arch/arm/mach-imx/clk-imx35.c                      |   18 +
 arch/arm/mach-imx/common.h                         |    1 +
 arch/arm/mach-imx/imx35-dt.c                       |   48 +++
 7 files changed, 643 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
 create mode 100644 arch/arm/boot/dts/imx35.dtsi
 create mode 100644 arch/arm/mach-imx/imx35-dt.c
Documentation/devicetree/bindings/clock/imx35-clock.txt new file +115 -0
new file mode 100644
index 0000000..9f9a60d
@@ -0,0 +1,115 @@
+* Clock bindings for Freescale i.MX35
+
+Required properties:
+- compatible: Should be "fsl,imx35-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX35
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	ckih			0
+	mpll			1
+	ppll			2
+	mpll_075		3
+	arm			4
+	hsp			5
+	hsp_div			6
+	hsp_sel			7
+	ahb			8
+	ipg			9
+	arm_per_div		10
+	ahb_per_div		11
+	ipg_per			12
+	uart_sel		13
+	uart_div		14
+	esdhc_sel		15
+	esdhc1_div		16
+	esdhc2_div		17
+	esdhc3_div		18
+	spdif_sel		19
+	spdif_div_pre		20
+	spdif_div_post		21
+	ssi_sel			22
+	ssi1_div_pre		23
+	ssi1_div_post		24
+	ssi2_div_pre		25
+	ssi2_div_post		26
+	usb_sel			27
+	usb_div			28
+	nfc_div			29
+	asrc_gate		30
+	pata_gate		31
+	audmux_gate		32
+	can1_gate		33
+	can2_gate		34
+	cspi1_gate		35
+	cspi2_gate		36
+	ect_gate		37
+	edio_gate		38
+	emi_gate		39
+	epit1_gate		40
+	epit2_gate		41
+	esai_gate		42
+	esdhc1_gate		43
+	esdhc2_gate		44
+	esdhc3_gate		45
+	fec_gate		46
+	gpio1_gate		47
+	gpio2_gate		48
+	gpio3_gate		49
+	gpt_gate		50
+	i2c1_gate		51
+	i2c2_gate		52
+	i2c3_gate		53
+	iomuxc_gate		54
+	ipu_gate		55
+	kpp_gate		56
+	mlb_gate		57
+	mshc_gate		58
+	owire_gate		59
+	pwm_gate		60
+	rngc_gate		61
+	rtc_gate		62
+	rtic_gate		63
+	scc_gate		64
+	sdma_gate		65
+	spba_gate		66
+	spdif_gate		67
+	ssi1_gate		68
+	ssi2_gate		69
+	uart1_gate		70
+	uart2_gate		71
+	uart3_gate		72
+	usbotg_gate		73
+	wdog_gate		74
+	max_gate		75
+	admux_gate		76
+	csi_gate		77
+	csi_div			78
+	csi_sel			79
+	iim_gate		80
+	gpu2d_gate		81
+	clk_max			82
+
+Examples:
+
+clks: ccm at 53f80000 {
+	compatible = "fsl,imx35-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <31>;
+	#clock-cells = <1>;
+};
+
+esdhc1: esdhc at 53fb4000 {
+	compatible = "fsl,imx35-esdhc";
+	reg = <0x53fb4000 0x4000>;
+	interrupts = <7>;
+	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+	clock-names = "ipg", "ahb", "per";
+	status = "disabled";
+};
arch/arm/boot/dts/imx35.dtsi new file +451 -0

451 lines not on this page · raw message

arch/arm/mach-imx/Kconfig +9 -0
index 270f786..3a560fa 100644
@@ -626,6 +626,15 @@ config MACH_IMX31_DT
 
 comment "MX35 platforms:"
 
+config MACH_IMX35_DT
+	bool "Support i.MX35 platforms from device tree"
+	select SOC_IMX35
+	select PINCTRL
+	select PINCTRL_IMX35
+	help
+	  Include support for Freescale i.MX35 based platforms
+	  using the device tree for discovery.
+
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select IMX_HAVE_PLATFORM_FLEXCAN
arch/arm/mach-imx/Makefile +1 -0
index bbe1f5b..97d7a1d 100644
@@ -89,6 +89,7 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
 
 obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
arch/arm/mach-imx/clk-imx35.c +18 -0
index 2193c83..cea861b 100644
@@ -45,6 +45,8 @@ static struct arm_ahb_div clk_consumer[] = {
 static char hsp_div_532[] = { 4, 8, 3, 0 };
 static char hsp_div_400[] = { 3, 6, 3, 0 };
 
+static struct clk_onecell_data clk_data;
+
 static const char *std_sel[] = {"ppll", "arm"};
 static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
 
@@ -286,3 +288,19 @@ int __init mx35_clocks_init(void)
 
 	return 0;
 }
+
+int __init mx35_clocks_init_dt(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int irq;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	mx35_clocks_init();
+
+	return 0;
+}
arch/arm/mach-imx/common.h +1 -0
index 7cbe22d..e438ca7 100644
@@ -65,6 +65,7 @@ int mx35_clocks_init(void);
 int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 int mx25_clocks_init_dt(void);
+int mx35_clocks_init_dt(void);
 int mx27_clocks_init_dt(void);
 int mx31_clocks_init_dt(void);
 struct platform_device *mxc_register_gpio(char *name, int id,
arch/arm/mach-imx/imx35-dt.c new file +48 -0

48 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v6 2/3 arm/dts: Add support for the cpuimx35 board from Eukrea and its baseboard.

The following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog
* SD.

Cc Rob Herring <[email protected]>
Cc Pawel Moll <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Stephen Warren <[email protected]>
Cc Ian Campbell <[email protected]>
Cc devicetree at vger.kernel.org
Cc Sascha Hauer <[email protected]>
Cc Shawn Guo <[email protected]>
Cc linux-arm-kernel at lists.infradead.org
Cc Eric B?nard <[email protected]>

---
ChangeLog v5->v6:
- Shawn Guo was added in the Cc.

---
 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi       |   61 ++++++++++
 .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts  |  124 ++++++++++++++++++++
 2 files changed, 185 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi new file +61 -0
new file mode 100644
index 0000000..2c2d4cd
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+	pcf8563 at 51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	tsc2007 {
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <
+				MX35_PAD_ATA_DA2__GPIO3_2 0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts new file +124 -0

124 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v6 3/3 ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.

In reply to Denis Carikli

The eukrea cpuimx35 has a pcf8563 RTC and a LCD gpio regulator.

We enable the respective drivers in order to be able to use theses
features with this configuration.

We also enabled the i.MX35 DT support because the cpuimx35 has now DT support.

Cc Sascha Hauer <[email protected]>
Cc linux-arm-kernel at lists.infradead.org
Cc Fabio Estevam <[email protected]>
Cc Shawn Guo <[email protected]>
Cc Eric B?nard <[email protected]>

---
ChangeLog v5->v6:
- Removed leds support addition because it has already been added by 94425a1 ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options

---
 arch/arm/configs/imx_v6_v7_defconfig |    3 +++
 1 file changed, 3 insertions(+)
arch/arm/configs/imx_v6_v7_defconfig +3 -0
index 8d0c5a0..1a0e3d9 100644
@@ -28,6 +28,7 @@ CONFIG_MACH_QONG=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MACH_IMX31_DT=y
+CONFIG_MACH_IMX35_DT=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
@@ -160,6 +161,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
@@ -216,6 +218,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_SNVS=y
Signature · 1 line
1.7.9.5