Bluetooth: ath3k: Add support for a new AR3012 device
PATCH 1/1 Bluetooth: ath3k: Add support for a new AR3012 device
T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e05f Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Reported-by Joshua Richenhagen <[email protected]>
Signed-off-by Sujith Manoharan <[email protected]>
--- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -96,6 +96,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3402) }, { USB_DEVICE(0x0cf3, 0x3121) }, { USB_DEVICE(0x0cf3, 0xe003) }, + { USB_DEVICE(0x0489, 0xe05f) },/* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) },
@@ -138,6 +139,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
@@ -163,6 +163,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
Signature · 1 line
1.8.4.2
Johan Hedberg
AppliedHi Sujith,
Quoted 7 lines · Sujith Manoharan
T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e05f Rev= 0.02C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Quoted 6 lines
Reported-by Joshua Richenhagen <[email protected]>Signed-off-by Sujith Manoharan <[email protected]>--- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+)
Applied to bluetooth-next. Thanks.
Johan