Skip to contentSkip to conversation

ath9k: Apply CUS227 specific TX gain values

PATCH New Sujith Manoharan 1 participant 1 message Nov 5, 2013 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ath9k: Apply CUS227 specific TX gain values

From: Sujith Manoharan <[email protected]>

CUS227, which is an AR9340 based card used in Qualcomm's Allplay platforms requires a custom TX gain array, based on the index 7. Add suport for this.

Cc Michael Larson <[email protected]>
Cc Stephen Collmeyer <[email protected]>
---
 drivers/net/wireless/ath/ath9k/ar9003_hw.c       |   8 ++
 drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 102 +++++++++++++++++++++++
 2 files changed, 110 insertions(+)
drivers/net/wireless/ath/ath9k/ar9003_hw.c +8 -0
index b054dee..d35f3f0 100644
@@ -578,6 +578,13 @@ static void ar9003_tx_gain_table_mode6(struct ath_hw *ah)
 			ar9580_1p0_type6_tx_gain_table);
 }
 
+static void ar9003_tx_gain_table_mode7(struct ath_hw *ah)
+{
+	if (AR_SREV_9340(ah))
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+			       ar9340_cus227_tx_gain_table_1p0);
+}
+
 typedef void (*ath_txgain_tab)(struct ath_hw *ah);
 
 static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
@@ -590,6 +597,7 @@ static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
 		ar9003_tx_gain_table_mode4,
 		ar9003_tx_gain_table_mode5,
 		ar9003_tx_gain_table_mode6,
+		ar9003_tx_gain_table_mode7,
 	};
 	int idx = ar9003_hw_get_tx_gain_idx(ah);
 
drivers/net/wireless/ath/ath9k/ar9340_initvals.h +102 -0

106 lines not on this page · raw message

Signature · 1 line
1.8.4.2