Skip to contentSkip to conversation

Implemented hid interfaces in daemon and hal

PATCH New Ravi kumar Veeramally 1 participant 14 messages Nov 5, 2013 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

cover Implemented hid interfaces in daemon and hal

v2: Fixed Johan's comments (splitting of patches, proper function and
struct names, update hal-msg.h and ipc document, alignment issues removed pointer from ipc struct)

v1: This patch set implements get/set protocol and get/set report
interfaces and supported functionality in daemon. Sending notifications and notification handling in hal. Few naming fixes and error handling. And last handling of few uHID events.

Ravi kumar Veeramally (13):
android/hid: Add hid event proto mode structure to hal msg headers android/hid: Implement hid get protocol in daemon android/hid: Implement hid set protocol in daemon android/hid: Handle protocol mode notification in hal android/hid: Add hid event get report structure to hal msg headers android/hid: Implement hid get report in daemon android/hid: Add missing set report parameters to ipc document android/hid: Implement hid set report in daemon android/hid: Handle get report notification in hal android/hid: Replace header checking magic number with defines android/hid: Handle invalid parameters in hal android/hid: Handle uhid events
android/hid: Align hal hid struct variables properly

 android/hal-hidhost.c   |  41 +++++-
 android/hal-ipc-api.txt |   4 +-
 android/hal-msg.h       |  41 ++++--
 android/hid.c           | 329 ++++++++++++++++++++++++++++++++++++++++++++++--
 4 files changed, 385 insertions(+), 30 deletions(-)
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/13 android/hid: Add hid event proto mode structure to hal msg headers

---
 android/hal-msg.h | 9 +++++++++
 1 file changed, 9 insertions(+)
android/hal-msg.h +9 -0
index f381862..5faf852 100644
@@ -442,6 +442,8 @@ struct hal_ev_hid_conn_state {
 	uint8_t state;
 } __attribute__((packed));
 
+#define HAL_HID_STATUS_OK		0x00
+
 #define HAL_EV_HID_INFO			0x82
 struct hal_ev_hid_info {
 	uint8_t bdaddr[6];
@@ -456,6 +458,13 @@ struct hal_ev_hid_info {
 	uint8_t descr[884];
 } __attribute__((packed));
 
+#define HAL_EV_HID_PROTO_MODE		0x83
+struct hal_ev_hid_proto_mode {
+	uint8_t bdaddr[6];
+	uint8_t status;
+	uint8_t mode;
+} __attribute__((packed));
+
 #define HAL_EV_AV_CONNECTION_STATE	0x81
 struct hal_ev_av_connection_state {
 	uint8_t state;
Signature · 1 line
1.8.1.2
#2 lore raw

PATCH 2/13 android/hid: Implement hid get protocol in daemon

In reply to Ravi kumar Veeramally

This patch requests hid device protocol mode and reads reply message and sends notification to hal.

---
 android/hid.c | 108 +++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 104 insertions(+), 4 deletions(-)
android/hid.c +104 -4
index c0c9aeb..97835d9 100644
@@ -54,6 +54,14 @@
 #define L2CAP_PSM_HIDP_INTR	0x13
 #define UHID_DEVICE_FILE	"/dev/uhid"
 
+/* HID message types */
+#define HID_MSG_GET_PROTOCOL	0x60
+#define HID_MSG_DATA		0xa0
+
+/* HID protocol header parameters */
+#define HID_PROTO_BOOT		0x00
+#define HID_PROTO_REPORT	0x01
+
 static GIOChannel *notification_io = NULL;
 static GIOChannel *ctrl_io = NULL;
 static GIOChannel *intr_io = NULL;
@@ -76,6 +84,7 @@ struct hid_device {
 	guint		intr_watch;
 	int		uhid_fd;
 	guint		uhid_watch_id;
+	int		hid_msg;
 };
 
 static int device_cmp(gconstpointer s, gconstpointer user_data)
@@ -243,12 +252,74 @@ static gboolean intr_watch_cb(GIOChannel *chan, GIOCondition cond,
 	return FALSE;
 }
 
+static void bt_hid_notify_proto_mode(struct hid_device *dev, uint8_t *buf,
+									int len)
+{
+	struct hal_ev_hid_proto_mode ev;
+	char address[18];
+
+	ba2str(&dev->dst, address);
+	DBG("device %s", address);
+
+	memset(&ev, 0, sizeof(ev));
+	bdaddr2android(&dev->dst, ev.bdaddr);
+
+	if (buf[0] == HID_MSG_DATA) {
+		ev.status = HAL_HID_STATUS_OK;
+		if (buf[1] == HID_PROTO_REPORT)
+			ev.mode = HAL_HID_REPORT_PROTOCOL;
+		else if (buf[1] == HID_PROTO_BOOT)
+			ev.mode = HAL_HID_BOOT_PROTOCOL;
+		else
+			ev.mode = HAL_HID_UNSUPPORTED_PROTOCOL;
+
+	} else {
+		ev.status = buf[0];
+		ev.mode = HAL_HID_UNSUPPORTED_PROTOCOL;
+	}
+
+	ipc_send(notification_io, HAL_SERVICE_ID_HIDHOST,
+				HAL_EV_HID_PROTO_MODE, sizeof(ev), &ev, -1);
+}
+
+static gboolean ctrl_io_watch_cb(GIOChannel *chan, gpointer data)
+{
+	struct hid_device *dev = data;
+	int fd, bread;
+	uint8_t buf[UHID_DATA_MAX];
+
+	DBG("");
+
+	fd = g_io_channel_unix_get_fd(chan);
+	bread = read(fd, buf, sizeof(buf));
+	if (bread < 0) {
+		error("read: %s(%d)", strerror(errno), -errno);
+		return TRUE;
+	}
+
+	switch (dev->hid_msg) {
+	case HID_MSG_GET_PROTOCOL:
+		bt_hid_notify_proto_mode(dev, buf, bread);
+		break;
+	default:
+		DBG("unhandled hid msg type 0x%02x", dev->hid_msg);
+	}
+
+	/* reset msg type request */
+	dev->hid_msg = -1;
+
+	return TRUE;
+}
+
 static gboolean ctrl_watch_cb(GIOChannel *chan, GIOCondition cond,
 								gpointer data)
 {
 	struct hid_device *dev = data;
 	char address[18];
 
+	if (cond & G_IO_IN)
+		return ctrl_io_watch_cb(chan, data);
+
 	ba2str(&dev->dst, address);
 	bt_hid_notify_state(dev, HAL_HID_STATE_DISCONNECTED);
 
@@ -395,8 +466,8 @@ static void control_connect_cb(GIOChannel *chan, GError *conn_err,
 	}
 
 	dev->ctrl_watch = g_io_add_watch(dev->ctrl_io,
-					G_IO_HUP | G_IO_ERR | G_IO_NVAL,
-					ctrl_watch_cb, dev);
+				G_IO_IN | G_IO_HUP | G_IO_ERR | G_IO_NVAL,
+				ctrl_watch_cb, dev);
 
 	return;
 
@@ -591,9 +662,38 @@ static uint8_t bt_hid_info(struct hal_cmd_hid_set_info *cmd, uint16_t len)
 static uint8_t bt_hid_get_protocol(struct hal_cmd_hid_get_protocol *cmd,
 								uint16_t len)
 {
-	DBG("Not Implemented");
+	struct hid_device *dev;
+	GSList *l;
+	bdaddr_t dst;
+	int fd;
+	uint8_t hdr[1];
 
-	return HAL_STATUS_FAILED;
+	DBG("");
+
+	if (len < sizeof(*cmd))
+		return HAL_STATUS_INVALID;
+
+	android2bdaddr(&cmd->bdaddr, &dst);
+
+	l = g_slist_find_custom(devices, &dst, device_cmp);
+	if (!l)
+		return HAL_STATUS_FAILED;
+
+	dev = l->data;
+
+	if (dev->boot_dev)
+		return HAL_STATUS_UNSUPPORTED;
+
+	dev->hid_msg = HID_MSG_GET_PROTOCOL;
+	hdr[0] = HID_MSG_GET_PROTOCOL | cmd->mode;
+	fd = g_io_channel_unix_get_fd(dev->ctrl_io);
+
+	if (write(fd, hdr, sizeof(hdr)) < 0) {
+		error("error while querying device protocol");
+		return HAL_STATUS_FAILED;
+	}
+
+	return HAL_STATUS_SUCCESS;
 }
 
 static uint8_t bt_hid_set_protocol(struct hal_cmd_hid_set_protocol *cmd,
Signature · 1 line
1.8.1.2
#3 lore raw

PATCH 3/13 android/hid: Implement hid set protocol in daemon

In reply to Ravi kumar Veeramally

This patch requests hid device to set protocol mode and reads reply message and sends notification to hal.

---
 android/hid.c | 35 +++++++++++++++++++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)
android/hid.c +33 -2
index 97835d9..d387d6d 100644
@@ -56,6 +56,7 @@
 
 /* HID message types */
 #define HID_MSG_GET_PROTOCOL	0x60
+#define HID_MSG_SET_PROTOCOL	0x70
 #define HID_MSG_DATA		0xa0
 
 /* HID protocol header parameters */
@@ -299,6 +300,7 @@ static gboolean ctrl_io_watch_cb(GIOChannel *chan, gpointer data)
 
 	switch (dev->hid_msg) {
 	case HID_MSG_GET_PROTOCOL:
+	case HID_MSG_SET_PROTOCOL:
 		bt_hid_notify_proto_mode(dev, buf, bread);
 		break;
 	default:
@@ -699,9 +701,38 @@ static uint8_t bt_hid_get_protocol(struct hal_cmd_hid_get_protocol *cmd,
 static uint8_t bt_hid_set_protocol(struct hal_cmd_hid_set_protocol *cmd,
 								uint16_t len)
 {
-	DBG("Not Implemented");
+	struct hid_device *dev;
+	GSList *l;
+	bdaddr_t dst;
+	int fd;
+	uint8_t hdr[1];
 
-	return HAL_STATUS_FAILED;
+	DBG("");
+
+	if (len < sizeof(*cmd))
+		return HAL_STATUS_INVALID;
+
+	android2bdaddr(&cmd->bdaddr, &dst);
+
+	l = g_slist_find_custom(devices, &dst, device_cmp);
+	if (!l)
+		return HAL_STATUS_FAILED;
+
+	dev = l->data;
+
+	if (dev->boot_dev)
+		return HAL_STATUS_UNSUPPORTED;
+
+	dev->hid_msg = HID_MSG_SET_PROTOCOL;
+	hdr[0] = HID_MSG_SET_PROTOCOL | cmd->mode;
+	fd = g_io_channel_unix_get_fd(dev->ctrl_io);
+
+	if (write(fd, hdr, sizeof(hdr)) < 0) {
+		error("error while setting device protocol");
+		return HAL_STATUS_FAILED;
+	}
+
+	return HAL_STATUS_SUCCESS;
 }
 
 static uint8_t bt_hid_get_report(struct hal_cmd_hid_get_report *cmd,
Signature · 1 line
1.8.1.2
#4 lore raw

PATCH 4/13 android/hid: Handle protocol mode notification in hal

In reply to Ravi kumar Veeramally
---
 android/hal-hidhost.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
android/hal-hidhost.c +12 -0
index c20c785..13928e6 100644
@@ -59,6 +59,15 @@ static void handle_info(void *buf)
 		bt_hh_cbacks->hid_info_cb((bt_bdaddr_t *) ev->bdaddr, info);
 }
 
+static void handle_proto_mode(void *buf)
+{
+	struct hal_ev_hid_proto_mode *ev = buf;
+
+	if (bt_hh_cbacks->protocol_mode_cb)
+		bt_hh_cbacks->protocol_mode_cb((bt_bdaddr_t *) ev->bdaddr,
+							ev->status, ev->mode);
+}
+
 /* will be called from notification thread context */
 void bt_notify_hh(uint16_t opcode, void *buf, uint16_t len)
 {
@@ -72,6 +81,9 @@ void bt_notify_hh(uint16_t opcode, void *buf, uint16_t len)
 	case HAL_EV_HID_INFO:
 		handle_info(buf);
 		break;
+	case HAL_EV_HID_PROTO_MODE:
+		handle_proto_mode(buf);
+		break;
 	default:
 		DBG("Unhandled callback opcode=0x%x", opcode);
 		break;
Signature · 1 line
1.8.1.2
#5 lore raw

PATCH 5/13 android/hid: Add hid event get report structure to hal msg headers

In reply to Ravi kumar Veeramally
---
 android/hal-msg.h | 8 ++++++++
 1 file changed, 8 insertions(+)
android/hal-msg.h +8 -0
index 5faf852..bc7df6b 100644
@@ -465,6 +465,14 @@ struct hal_ev_hid_proto_mode {
 	uint8_t mode;
 } __attribute__((packed));
 
+#define HAL_EV_HID_GET_REPORT		0x85
+struct hal_ev_hid_get_report {
+	uint8_t  bdaddr[6];
+	uint8_t  status;
+	uint16_t len;
+	uint8_t  data[0];
+} __attribute__((packed));
+
 #define HAL_EV_AV_CONNECTION_STATE	0x81
 struct hal_ev_av_connection_state {
 	uint8_t state;
Signature · 1 line
1.8.1.2
#6 lore raw

PATCH 6/13 android/hid: Implement hid get report in daemon

In reply to Ravi kumar Veeramally

This patch requests hid device report and reads reply message and sends notification to hal.

---
 android/hal-hidhost.c |   1 +
 android/hid.c         | 104 +++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 103 insertions(+), 2 deletions(-)
android/hal-hidhost.c +1 -0
index 13928e6..f554cb2 100644
@@ -251,6 +251,7 @@ static bt_status_t hh_get_report(bt_bdaddr_t *bd_addr,
 
 	memcpy(cmd.bdaddr, bd_addr, sizeof(cmd.bdaddr));
 	cmd.id = reportId;
+	cmd.buf = bufferSize;
 
 	switch (reportType) {
 	case BTHH_INPUT_REPORT:
android/hid.c +102 -2

137 lines not on this page · raw message

Signature · 1 line
1.8.1.2
#7 lore raw

PATCH 7/13 android/hid: Add missing set report parameters to ipc document

In reply to Ravi kumar Veeramally
---
 android/hal-ipc-api.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
android/hal-ipc-api.txt +3 -1
index 6b11684..48bcc45 100644
@@ -552,7 +552,9 @@ Commands and responses:
 
 		Command parameters: Remote address (6 octets)
 		                    Report type (1 octet)
-		                    ...
+		                    Report length (2 octet)
+		                    Report data (670 octet) L2CAP default MTU
+
 		Response parameters: <none>
 
 		Valid report types: 0x01 = Input
Signature · 1 line
1.8.1.2
#8 lore raw

PATCH 8/13 android/hid: Implement hid set report in daemon

In reply to Ravi kumar Veeramally

This patch requests hid device to set report.

---
 android/hal-hidhost.c |  2 ++
 android/hal-msg.h     |  6 ++++--
 android/hid.c         | 40 ++++++++++++++++++++++++++++++++++++++--
 3 files changed, 44 insertions(+), 4 deletions(-)
android/hal-hidhost.c +2 -0
index f554cb2..29e3ee0 100644
@@ -284,6 +284,8 @@ static bt_status_t hh_set_report(bt_bdaddr_t *bd_addr,
 		return BT_STATUS_PARM_INVALID;
 
 	memcpy(cmd.bdaddr, bd_addr, sizeof(cmd.bdaddr));
+	cmd.len = strlen(report);
+	memcpy(cmd.data, report, cmd.len);
 
 	switch (reportType) {
 	case BTHH_INPUT_REPORT:
android/hal-msg.h +4 -2
index bc7df6b..2c3067f 100644
@@ -290,8 +290,10 @@ struct hal_cmd_hid_get_report {
 
 #define HAL_OP_HID_SET_REPORT		0x08
 struct hal_cmd_hid_set_report {
-	uint8_t bdaddr[6];
-	uint8_t type;
+	uint8_t  bdaddr[6];
+	uint8_t  type;
+	uint16_t len;
+	uint8_t  data[670];
 } __attribute__((packed));
 
 #define HAL_OP_HID_SEND_DATA		0x09
android/hid.c +38 -2
index f1bf9e8..25e33fa 100644
@@ -56,6 +56,7 @@
 
 /* HID message types */
 #define HID_MSG_GET_REPORT	0x40
+#define HID_MSG_SET_REPORT	0x50
 #define HID_MSG_GET_PROTOCOL	0x60
 #define HID_MSG_SET_PROTOCOL	0x70
 #define HID_MSG_DATA		0xa0
@@ -846,9 +847,44 @@ static uint8_t bt_hid_get_report(struct hal_cmd_hid_get_report *cmd,
 static uint8_t bt_hid_set_report(struct hal_cmd_hid_set_report *cmd,
 								uint16_t len)
 {
-	DBG("Not Implemented");
+	struct hid_device *dev;
+	GSList *l;
+	bdaddr_t dst;
+	int fd;
+	uint8_t *req;
+	uint8_t req_size;
 
-	return HAL_STATUS_FAILED;
+	DBG("");
+
+	if (len < sizeof(*cmd))
+		return HAL_STATUS_INVALID;
+
+	android2bdaddr(&cmd->bdaddr, &dst);
+
+	l = g_slist_find_custom(devices, &dst, device_cmp);
+	if (!l)
+		return HAL_STATUS_FAILED;
+
+	dev = l->data;
+	dev->hid_msg = HID_MSG_SET_REPORT;
+	req_size = 1 + cmd->len;
+	req = g_try_malloc0(req_size);
+	if (!req)
+		return HAL_STATUS_NOMEM;
+
+	req[0] = HID_MSG_SET_REPORT | cmd->type;
+	memcpy(req + 1, cmd->data, req_size - 1);
+
+	fd = g_io_channel_unix_get_fd(dev->ctrl_io);
+
+	if (write(fd, req, req_size) < 0) {
+		error("error while querying device protocol");
+		g_free(req);
+		return HAL_STATUS_FAILED;
+	}
+
+	g_free(req);
+	return HAL_STATUS_SUCCESS;
 }
 
 static uint8_t bt_hid_send_data(struct hal_cmd_hid_send_data *cmd,
Signature · 1 line
1.8.1.2
#9 lore raw

PATCH 9/13 android/hid: Handle get report notification in hal

In reply to Ravi kumar Veeramally
---
 android/hal-hidhost.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
android/hal-hidhost.c +12 -0
index 29e3ee0..fe68fe7 100644
@@ -68,6 +68,15 @@ static void handle_proto_mode(void *buf)
 							ev->status, ev->mode);
 }
 
+static void handle_get_report(void *buf)
+{
+	struct hal_ev_hid_get_report *ev = buf;
+
+	if (bt_hh_cbacks->get_report_cb)
+		bt_hh_cbacks->get_report_cb((bt_bdaddr_t *) ev->bdaddr,
+						ev->status, ev->data, ev->len);
+}
+
 /* will be called from notification thread context */
 void bt_notify_hh(uint16_t opcode, void *buf, uint16_t len)
 {
@@ -84,6 +93,9 @@ void bt_notify_hh(uint16_t opcode, void *buf, uint16_t len)
 	case HAL_EV_HID_PROTO_MODE:
 		handle_proto_mode(buf);
 		break;
+	case HAL_EV_HID_GET_REPORT:
+		handle_get_report(buf);
+		break;
 	default:
 		DBG("Unhandled callback opcode=0x%x", opcode);
 		break;
Signature · 1 line
1.8.1.2
#10 lore raw

PATCH 10/13 android/hid: Replace header checking magic number with defines

In reply to Ravi kumar Veeramally
---
 android/hid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
android/hid.c +1 -1
index 25e33fa..d3a74b9 100644
@@ -200,7 +200,7 @@ static gboolean intr_io_watch_cb(GIOChannel *chan, gpointer data)
 	}
 
 	/* Discard non-data packets */
-	if (bread == 0 || buf[0] != 0xA1)
+	if (bread == 0 || buf[0] != (HID_MSG_DATA | HID_DATA_TYPE_INPUT))
 		return TRUE;
 
 	/* send data to uHID device skipping HIDP header byte */
Signature · 1 line
1.8.1.2
#11 lore raw

PATCH 11/13 android/hid: Handle invalid parameters in hal

In reply to Ravi kumar Veeramally
---
 android/hal-hidhost.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
android/hal-hidhost.c +8 -6
index fe68fe7..815902b 100644
@@ -204,9 +204,8 @@ static bt_status_t hh_get_protocol(bt_bdaddr_t *bd_addr,
 	case BTHH_BOOT_MODE:
 		cmd.mode = HAL_HID_BOOT_PROTOCOL;
 		break;
-	case BTHH_UNSUPPORTED_MODE:
-		cmd.mode = HAL_HID_UNSUPPORTED_PROTOCOL;
-		break;
+	default:
+		return BT_STATUS_PARM_INVALID;
 	}
 
 	return hal_ipc_cmd(HAL_SERVICE_ID_HIDHOST,
@@ -236,9 +235,8 @@ static bt_status_t hh_set_protocol(bt_bdaddr_t *bd_addr,
 	case BTHH_BOOT_MODE:
 		cmd.mode = HAL_HID_BOOT_PROTOCOL;
 		break;
-	case BTHH_UNSUPPORTED_MODE:
-		cmd.mode = HAL_HID_UNSUPPORTED_PROTOCOL;
-		break;
+	default:
+		return BT_STATUS_PARM_INVALID;
 	}
 
 	return hal_ipc_cmd(HAL_SERVICE_ID_HIDHOST,
@@ -275,6 +273,8 @@ static bt_status_t hh_get_report(bt_bdaddr_t *bd_addr,
 	case BTHH_FEATURE_REPORT:
 		cmd.type = HAL_HID_FEATURE_REPORT;
 		break;
+	default:
+		return BT_STATUS_PARM_INVALID;
 	}
 
 	return hal_ipc_cmd(HAL_SERVICE_ID_HIDHOST, HAL_OP_HID_GET_REPORT,
@@ -309,6 +309,8 @@ static bt_status_t hh_set_report(bt_bdaddr_t *bd_addr,
 	case BTHH_FEATURE_REPORT:
 		cmd.type = HAL_HID_FEATURE_REPORT;
 		break;
+	default:
+		return BT_STATUS_PARM_INVALID;
 	}
 
 	return hal_ipc_cmd(HAL_SERVICE_ID_HIDHOST, HAL_OP_HID_SET_REPORT,
Signature · 1 line
1.8.1.2
#12 lore raw

PATCH 12/13 android/hid: Handle uhid events

In reply to Ravi kumar Veeramally

Handling few uhid events and described scenarios. OUTPUT and FEATURE events are not yet handled.

---
 android/hid.c | 40 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)
android/hid.c +39 -1
index d3a74b9..8f3a28a 100644
@@ -149,6 +149,11 @@ static void hid_device_free(struct hid_device *dev)
 	g_free(dev);
 }
 
+static void handle_uhid_event(struct hid_device *dev, struct uhid_event *ev)
+{
+	DBG("UHID_OUTPUT UHID_FEATURE unsupported");
+}
+
 static gboolean uhid_event_cb(GIOChannel *io, GIOCondition cond,
 							gpointer user_data)
 {
@@ -172,7 +177,40 @@ static gboolean uhid_event_cb(GIOChannel *io, GIOCondition cond,
 	}
 
 	DBG("uHID event type %d received", ev.type);
-	/* TODO Handle events */
+
+	switch (ev.type) {
+	case UHID_START:
+	case UHID_STOP:
+		/* These are called to start and stop the underlying hardware.
+		 * We open the channels before creating the device so the
+		 * hardware is always ready. No need to handle these.
+		 * The kernel never destroys a device itself! Only an explicit
+		 * UHID_DESTROY request can remove a device. */
+
+		break;
+	case UHID_OPEN:
+	case UHID_CLOSE:
+		/* OPEN/CLOSE are sent whenever user-space opens any interface
+		 * provided by the kernel HID device. Whenever the open-count
+		 * is non-zero we must be ready for I/O. As long as it is zero,
+		 * we can decide to drop all I/O and put the device
+		 * asleep This is optional, though. */
+		break;
+	case UHID_OUTPUT:
+	case UHID_FEATURE:
+		handle_uhid_event(dev, &ev);
+		break;
+	case UHID_OUTPUT_EV:
+		/* This is only sent by kernels prior to linux-3.11. It
+		 * requires us to parse HID-descriptors in user-space to
+		 * properly handle it. This is redundant as the kernel
+		 * does it already. That's why newer kernels assemble
+		 * the output-reports and send it to us via UHID_OUTPUT. */
+		DBG("UHID_OUTPUT_EV unsupported");
+		break;
+	default:
+		warn("unexpected uHID event");
+	}
 
 	return TRUE;
 
Signature · 1 line
1.8.1.2
#13 lore raw

PATCH 13/13 android/hid: Align hal hid struct variables properly

In reply to Ravi kumar Veeramally
---
 android/hal-msg.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
android/hal-msg.h +9 -9
index 2c3067f..41ba649 100644
@@ -282,9 +282,9 @@ struct hal_cmd_hid_set_protocol {
 
 #define HAL_OP_HID_GET_REPORT		0x07
 struct hal_cmd_hid_get_report {
-	uint8_t bdaddr[6];
-	uint8_t type;
-	uint8_t id;
+	uint8_t  bdaddr[6];
+	uint8_t  type;
+	uint8_t  id;
 	uint16_t buf;
 } __attribute__((packed));
 
@@ -448,16 +448,16 @@ struct hal_ev_hid_conn_state {
 
 #define HAL_EV_HID_INFO			0x82
 struct hal_ev_hid_info {
-	uint8_t bdaddr[6];
-	uint8_t attr;
-	uint8_t subclass;
-	uint8_t app_id;
+	uint8_t  bdaddr[6];
+	uint8_t  attr;
+	uint8_t  subclass;
+	uint8_t  app_id;
 	uint16_t vendor;
 	uint16_t product;
 	uint16_t version;
-	uint8_t country;
+	uint8_t  country;
 	uint16_t descr_len;
-	uint8_t descr[884];
+	uint8_t  descr[884];
 } __attribute__((packed));
 
 #define HAL_EV_HID_PROTO_MODE		0x83
Signature · 1 line
1.8.1.2