ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"
PATCH 1/1 ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"
Fix the timeout issue after running "bootp" command in u-boot console. For example you see "EHCI timed out on TD- token=0x...". TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a controller reset and before RUN bit is set
(per technical reference manual).
--- include/configs/tegra114-common.h | 1 + include/configs/tegra30-common.h | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)
include/configs/tegra114-common.h +1 -0
@@ -82,5 +82,6 @@/* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10#endif /* _TEGRA114_COMMON_H_ */
include/configs/tegra30-common.h +1 -0
@@ -79,5 +79,6 @@/* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10#endif /* _TEGRA30_COMMON_H_ */
Signature · 1 line
1.7.7
PATCH 1/1 ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"
Quoted 5 lines · Jim Lin
Fix the timeout issue after running "bootp" command in u-boot console. For example you see "EHCI timed out on TD- token=0x...". TXFIFOTHRES bits of TXFILLTUNING register should be set to
0x10after a controller reset and before RUN bit is set
(per technical reference manual).
(I wasn't experiencing any time-out issues myself on those platforms, but everything certainly still works fine after this patch)