ARM: at91: sama5d3: add sama5d36ek support
Subsystems (5)
v3 cover ARM: at91: sama5d3: add sama5d36ek support
This patch series add support for sama5d36 in sama5d3x family. It also adds the dts & dtsi file for sama5d36ek board.
v2 --> v3:
change the copyright.
v1 --> v2:
base on the at91-3.13-cleanup tree.
add a new sama5d36.dtsi to include the splitted peripherals.
Josh Wu (2):
ARM: at91: sama5d3: add support for sama5d36 chip
ARM: at91: sama5d3/dt: add sama5d36ek dts files
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 20 +++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/include/mach/cpu.h | 3 +- arch/arm/mach-at91/sama5d3.c | 7 ++--- arch/arm/mach-at91/setup.c | 4 +++ 8 files changed, 85 insertions(+), 7 deletions(-) create mode 100644 arch/arm/boot/dts/sama5d36.dtsi create mode 100644 arch/arm/boot/dts/sama5d36ek.dts
Signature · 1 line
1.7.10
PATCH v3 1/2 ARM: at91: sama5d3: add support for sama5d36 chip
The SAMA5D36 chip is the superset product of SAMA5D3x family.
For detail information please refer to:
http://www.atmel.com/Microsite/sama5d3/default.aspx
---
v1, v2 --> v3:
none.
arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/include/mach/cpu.h | 3 ++- arch/arm/mach-at91/sama5d3.c | 7 +++---- arch/arm/mach-at91/setup.c | 4 ++++ 4 files changed, 10 insertions(+), 6 deletions(-)
arch/arm/mach-at91/Kconfig +1 -1
@@ -67,7 +67,7 @@ config SOC_SAMA5D3 select HAVE_AT91_DBGU1 help Select this if you are using one of Atmel's SAMA5D3 family SoC. - This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35. + This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. endif if SOC_SAM_V4_V5
arch/arm/mach-at91/include/mach/cpu.h +2 -1
@@ -53,6 +53,7 @@#define ARCH_EXID_SAMA5D33 0x00414300#define ARCH_EXID_SAMA5D34 0x00414301#define ARCH_EXID_SAMA5D35 0x00584300 +#define ARCH_EXID_SAMA5D36 0x00004301#define ARCH_FAMILY_AT91X92 0x09200000#define ARCH_FAMILY_AT91SAM9 0x01900000
@@ -105,7 +106,7 @@ enum at91_soc_subtype {/* SAMA5D3 */ AT91_SOC_SAMA5D31 ,AT91_SOC_SAMA5D33 ,AT91_SOC_SAMA5D34 , -AT91_SOC_SAMA5D35 , +AT91_SOC_SAMA5D35 ,AT91_SOC_SAMA5D36 ,/* No subtype for this SoC */ AT91_SOC_SUBTYPE_NONE,
arch/arm/mach-at91/sama5d3.c +3 -4
@@ -177,25 +177,24 @@ static struct clk udphs_clk = { .pid = SAMA5D3_ID_UDPHS, .type = CLK_TYPE_PERIPHERAL, }; -/* gmac only for sama5d33, sama5d34, sama5d35 */ +/* gmac only for sama5d33, sama5d34, sama5d35, sama5d36 */ static struct clk macb0_clk = { .name ="macb0_clk" , .pid =SAMA5D3_ID_GMAC , .type =CLK_TYPE_PERIPHERAL , }; -/* emac only for sama5d31, sama5d35 */ +/* emac only for sama5d31, sama5d35, sama5d36 */ static struct clk macb1_clk = { .name ="macb1_clk" , .pid =SAMA5D3_ID_EMAC , .type =CLK_TYPE_PERIPHERAL , }; -/* lcd only for sama5d31, sama5d33, sama5d34 */ +/* lcd only for sama5d31, sama5d33, sama5d34, sama5d36 */ static struct clk lcdc_clk = { .name ="lcdc_clk" , .pid =SAMA5D3_ID_LCDC , .type =CLK_TYPE_PERIPHERAL , }; -/* isi only for sama5d33, sama5d35 */ static struct clk isi_clk = { .name ="isi_clk" , .pid =SAMA5D3_ID_ISI ,
arch/arm/mach-at91/setup.c +4 -0
@@ -232,6 +232,9 @@ static void __init soc_detect(u32 dbgu_base)case ARCH_EXID_SAMA5D35 : at91_soc_initdata.subtype =AT91_SOC_SAMA5D35 ;break ; +case ARCH_EXID_SAMA5D36 : + at91_soc_initdata.subtype =AT91_SOC_SAMA5D36 ; +break ; } } }
@@ -274,6 +277,7 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAMA5D33] = "sama5d33", [AT91_SOC_SAMA5D34] = "sama5d34", [AT91_SOC_SAMA5D35] = "sama5d35", + [AT91_SOC_SAMA5D36] = "sama5d36", [AT91_SOC_SUBTYPE_NONE] = "None", [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", };
Signature · 1 line
1.7.10
PATCH v3 2/2 ARM: at91: sama5d3/dt: add sama5d36ek dts files
In reply to Josh WuAdd .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in sama5d3.dtsi.
---
v2 --> v3:
change the copyright of sama5d36.dtsi.
v1 --> v2:
add a new sama5d36.dtsi file to include the peripheral dtsi file.
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 20 ++++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sama5d36.dtsi create mode 100644 arch/arm/boot/dts/sama5d36ek.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
arch/arm/boot/dts/sama5d3.dtsi +1 -1
@@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <[email protected]>
arch/arm/boot/dts/sama5d36.dtsi new file +20 -0
@@ -0,0 +1,20 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <[email protected]> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +};
arch/arm/boot/dts/sama5d36ek.dts new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
1.7.10
v3 cover ARM: at91: sama5d3: add sama5d36ek support
In reply to Josh WuOn 06/11/2013 11:01, Josh Wu :
Quoted 4 lines
This patch series add support for sama5d36 in sama5d3x family. It also adds the dts & dtsi file for sama5d36ek board.
v2 --> v3:
I'll integrate them in at91-3.14-dt branch.
Thank, best regards,
Quoted 22 lines
change the copyright.
v1 --> v2:
base on the at91-3.13-cleanup tree.
add a newsama5d36.dtsito include the splitted peripherals.Josh Wu (2):
ARM: at91: sama5d3: add support for sama5d36 chip
ARM: at91: sama5d3/dt: add sama5d36ek dts filesarch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d36.dtsi | 20 +++++++++++++ arch/arm/boot/dts/sama5d36ek.dts | 53 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/include/mach/cpu.h | 3 +- arch/arm/mach-at91/sama5d3.c | 7 ++--- arch/arm/mach-at91/setup.c | 4 +++ 8 files changed, 85 insertions(+), 7 deletions(-)create mode 100644
arch/arm/boot/dts/sama5d36.dtsicreate mode 100644arch/arm/boot/dts/sama5d36ek.dts
Signature · 1 line
Nicolas Ferre