Skip to contentSkip to conversation

example of Kernel work

DISCUSSION John Whitmore 3 participants 6 messages Nov 6, 2013

lore
Share & tools
lore
#1 lore raw
Quoted 7 lines · John Whitmore

Found this nice little document on Kernel work in the yocto build system [1] it's just a shame that it isn't up to date, to use against the current version of the build system.

Does anybody know is there a more up to date version of this document? It might just be me but a worked example is so much cleared then writing about the process.

I updated the kernel lab for 1.4, and it used to be here:

https://www.yoctoproject.org/training/kernel-lab

I see the kernel-lab layers for 1.4 here:

https://www.yoctoproject.org/training/kernel-training

Which doesn't make sense either - you'd think the layers would go with the (nonexistent) pdf under kernel-lab.

And I don't see either for 1.3 and am wondering how you found it...

Cc ing Jefro on this.

Tom

Quoted 6 lines

[1] https://www.yoctoproject.org/sites/yoctoproject.org/files/elc2013-kernel-lab.pdf
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#2 lore raw
Quoted 15 lines · Tom Zanussi
Quoted 7 lines · John Whitmore

Found this nice little document on Kernel work in the yocto build system [1] it's just a shame that it isn't up to date, to use against the current version of the build system.

Does anybody know is there a more up to date version of this document? It might just be me but a worked example is so much cleared then writing about the process.

I updated the kernel lab for 1.4, and it used to be here:

https://www.yoctoproject.org/training/kernel-lab

I see the kernel-lab layers for 1.4 here:

Quoted 10 lines

https://www.yoctoproject.org/training/kernel-training

Which doesn't make sense either - you'd think the layers would go with the (nonexistent) pdf under kernel-lab.

And I don't see either for 1.3 and am wondering how you found it...

Cc ing Jefro on this.

OK, well, anyway, until it gets fixed, here's a link to the pdf:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4.pdf

And here are the accompanying layers:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4-layers.tar.bz2

Sorry for the inconvenience.

Tom

Quoted 9 lines

Tom

Quoted 6 lines

[1] https://www.yoctoproject.org/sites/yoctoproject.org/files/elc2013-kernel-lab.pdf
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw

response inline

Quoted 16 lines · Tom Zanussi
Quoted 15 lines · Tom Zanussi
Quoted 7 lines · John Whitmore

Found this nice little document on Kernel work in the yocto build system [1] it's just a shame that it isn't up to date, to use against the current version of the build system.

Does anybody know is there a more up to date version of this document? It might just be me but a worked example is so much cleared then writing about the process.

I updated the kernel lab for 1.4, and it used to be here:

https://www.yoctoproject.org/training/kernel-lab

I see the kernel-lab layers for 1.4 here:

Quoted 7 lines
Quoted 7 lines

https://www.yoctoproject.org/training/kernel-training

Which doesn't make sense either - you'd think the layers would go with the (nonexistent) pdf under kernel-lab.

And I don't see either for 1.3 and am wondering how you found it...

You must blame Google for that one. I was just searching for help on making Kernel changes. There'll probably be another thread :-(

Quoted 8 lines
Quoted 3 lines
Cc ing Jefro on this.

OK, well, anyway, until it gets fixed, here's a link to the pdf:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4.pdf

Quoted 9 lines

And here are the accompanying layers:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4-layers.tar.bz2

Sorry for the inconvenience.

Tom

Quoted 1 line

Tom

Thanks a million for your help I'll have a look at those versions.

Quoted 10 lines
Quoted 8 lines
Quoted 7 lines

[1] https://www.yoctoproject.org/sites/yoctoproject.org/files/elc2013-kernel-lab.pdf
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#4 lore raw
In reply to Tom Zanussi

On Wed, 6 Nov 2013, Tom Zanussi wrote:

... snip ...

Quoted 9 lines

OK, well, anyway, until it gets fixed, here's a link to the pdf:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4.pdf

And here are the accompanying layers:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4-layers.tar.bz2

Sorry for the inconvenience.

i recall exchanging some email with tom a few weeks back about that
very lab. i started working through it and making notes as to how to update it for 1.5 so that i could use it in upcoming OE/yocto classes. my goal is for something that is based on his 1.4 lab but tweaked here and there to match the rest of my courseware.

when i finally get it done, i'll post it -- unless tom updates his
lab first. :-)

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#5 lore raw
Quoted 14 lines · Robert P. J. Day

On Wed, 6 Nov 2013, Tom Zanussi wrote:

... snip ...

Quoted 9 lines

OK, well, anyway, until it gets fixed, here's a link to the pdf:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4.pdf

And here are the accompanying layers:

https://www.yoctoproject.org/sites/yoctoproject.org/files/kernel-lab-1.4-layers.tar.bz2

Sorry for the inconvenience.

Quoted 9 lines

i recall exchanging some email with tom a few weeks back about that
very lab. i started working through it and making notes as to how to update it for 1.5 so that i could use it in upcoming OE/yocto classes. my goal is for something that is based on his 1.4 lab but tweaked here and there to match the rest of my courseware.

when i finally get it done, i'll post it -- unless tom updates his
lab first. :-)

I do have the 1.5 update on my schedule for 1.6 M1, but if you were going to do something like that anyway, that would be great. I wasn't actually going to start on it until next week - I guess I should check with you then before I actually start diving in...

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5486

Thanks,

Tom

Quoted 2 lines

rday