Skip to contentSkip to conversation

am33xx: Make SoC bootcount driver have its own symbol

PATCH New Tom Rini 2 participants 3 messages Nov 8, 2013 – Nov 12, 2013

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

PATCH 1/1 am33xx: Make SoC bootcount driver have its own symbol

Some am33xx boards may not use the RTC block for bootcount (as it may not be wired up for the board) and use some other facility. So add another symbol for the bootcount driver for the IP block.

Cc Heiko Schocher <[email protected]>
---
 drivers/bootcount/Makefile            |    2 +-
 drivers/bootcount/bootcount_davinci.c |    4 ++++
 include/configs/am335x_evm.h          |    4 ++++
 include/configs/ti_am335x_common.h    |    4 ++--
 4 files changed, 11 insertions(+), 3 deletions(-)
drivers/bootcount/Makefile +1 -1
index d0b8a79..4154352 100644
@@ -10,7 +10,7 @@ COBJS-y				+= bootcount.o
 COBJS-$(CONFIG_AT91SAM9XE)	+= bootcount_at91.o
 COBJS-$(CONFIG_BLACKFIN)	+= bootcount_blackfin.o
 COBJS-$(CONFIG_SOC_DA8XX)	+= bootcount_davinci.o
-COBJS-$(CONFIG_AM33XX)		+= bootcount_davinci.o
+COBJS-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o
 COBJS-$(CONFIG_BOOTCOUNT_RAM)	+= bootcount_ram.o
 COBJS-$(CONFIG_BOOTCOUNT_ENV)	+= bootcount_env.o
 
drivers/bootcount/bootcount_davinci.c +4 -0
index f0acfad..fa87b5e 100644
@@ -2,6 +2,10 @@
  * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs at denx.de.
  *
+ * A bootcount driver for the RTC IP block found on many TI platforms.
+ * This requires the RTC clocks, etc, to be enabled prior to use and
+ * not all boards with this IP block on it will have the RTC in use.
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
include/configs/am335x_evm.h +4 -0
index c2ba7e3..9015927 100644
@@ -199,6 +199,10 @@
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 
+/* Bootcount using the RTC block */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_AM33XX
+
 /* CPSW support */
 #define CONFIG_SPL_ETH_SUPPORT
 
include/configs/ti_am335x_common.h +2 -2
index 0f6fa62..4364eef 100644
@@ -43,9 +43,9 @@
 
 /*
  * RTC related defines. To use bootcount you must set bootlimit in the
- * environment to a non-zero value.
+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
+ * in the board config.
  */
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 
 /* Enable the HW watchdog, since we can use this with bootcount */
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 am33xx: Make SoC bootcount driver have its own symbol

Hello Tom,

Am 08.11.2013 19:54, schrieb Tom Rini:

Quoted 4 lines

Some am33xx boards may not use the RTC block for bootcount (as it may not be wired up for the board) and use some other facility. So add another symbol for the bootcount driver for the IP block.

Quoted 8 lines
Cc Heiko Schocher<[email protected]>
---
  drivers/bootcount/Makefile            |    2 +-
  drivers/bootcount/bootcount_davinci.c |    4 ++++
  include/configs/am335x_evm.h          |    4 ++++
  include/configs/ti_am335x_common.h    |    4 ++--
  4 files changed, 11 insertions(+), 3 deletions(-)

Thanks!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
author
#2 lore raw

PATCH 1/1 am33xx: Make SoC bootcount driver have its own symbol

In reply to Tom Rini
Quoted 6 lines · Tom Rini

Some am33xx boards may not use the RTC block for bootcount (as it may not be wired up for the board) and use some other facility. So add another symbol for the bootcount driver for the IP block.

Cc Heiko Schocher <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131112/34044cd1/attachment.pgp>