Skip to contentSkip to conversation

usb: phy: Add RCAR Gen2 USB phy

PATCH In review Ulrich Hecht 1 participant 1 message Nov 20, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 4/9 usb: phy: Add RCAR Gen2 USB phy

From: Valentine Barshak <[email protected]>

This adds RCAR Gen2 USB phy support. The driver configures USB channels 0/2 which are shared between PCI USB hosts and USBHS/USBSS devices. It also controls internal USBHS phy.

---
 drivers/usb/phy/Kconfig                         |  13 ++
 drivers/usb/phy/Makefile                        |   1 +
 drivers/usb/phy/phy-rcar-gen2-usb.c             | 248 ++++++++++++++++++++++++
 include/linux/platform_data/usb-rcar-gen2-phy.h |  22 +++
 4 files changed, 284 insertions(+)
 create mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
 create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
drivers/usb/phy/Kconfig +13 -0
index d5589f9..c0c8cd3 100644
@@ -214,6 +214,19 @@ config USB_RCAR_PHY
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-rcar-usb.
 
+config USB_RCAR_GEN2_PHY
+	tristate "Renesas R-Car Gen2 USB PHY support"
+	depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
+	select USB_PHY
+	help
+	  Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
+	  It is typically used to control internal USB PHY for USBHS,
+	  and to configure shared USB channels 0 and 2.
+	  This driver supports R8A7790 and R8A7791.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phy-rcar-gen2-usb.
+
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM
drivers/usb/phy/Makefile +1 -0
index 2135e85..8c5b147 100644
@@ -29,5 +29,6 @@ obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_RCAR_PHY)		+= phy-rcar-usb.o
+obj-$(CONFIG_USB_RCAR_GEN2_PHY)		+= phy-rcar-gen2-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
drivers/usb/phy/phy-rcar-gen2-usb.c new file +248 -0

248 lines not on this page · raw message

include/linux/platform_data/usb-rcar-gen2-phy.h new file +22 -0
new file mode 100644
index 0000000..dd3ba46
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __USB_RCAR_GEN2_PHY_H
+#define __USB_RCAR_GEN2_PHY_H
+
+#include <linux/types.h>
+
+struct rcar_gen2_phy_platform_data {
+	/* USB channel 0 configuration */
+	bool chan0_pci:1;	/* true: PCI USB host 0, false: USBHS */
+	/* USB channel 2 configuration */
+	bool chan2_pci:1;	/* true: PCI USB host 2, false: USBSS */
+};
+
+#endif
Signature · 1 line
1.8.4