Skip to contentSkip to conversation

powerpc/CoreNet64: compile with CONFIG_E{5,6}500_CPU well

PATCH New Tiejun Chen 1 participant 1 message Nov 22, 2013 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc/CoreNet64: compile with CONFIG_E{5,6}500_CPU well

If CONFIG_ALTIVEC is enabled for CoreNet64, and if we also select CONFIG_E{5,6}500_CPU this may introduce -mcpu=e500mc64 into $CFLAGS. But Altivec option not allowed with e500mc64, then some compiling errors occur like this:

CC arch/powerpc/lib/xor_vmx.o
arch/powerpc/lib/xor_vmx.c:1:0: error: AltiVec not supported in this target make[1]: *** [arch/powerpc/lib/xor_vmx.o] Error 1
make: *** [arch/powerpc/lib] Error 2

So we should restrict e500mc64 in altivec scenario.

---
 arch/powerpc/Makefile |    5 +++++
 1 file changed, 5 insertions(+)
arch/powerpc/Makefile +5 -0
index 607acf5..fd5f6b5 100644
@@ -127,7 +127,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
 CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
 CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
 E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
 CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
 CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
 
Signature · 1 line
1.7.9.5