Skip to contentSkip to conversation

zram/zsmalloc promotion

PATCH Superseded Minchan Kim 2 participants 7 messages Nov 25, 2013 – Dec 4, 2013

Subsystems (6)

v8 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Minchan Kim

author maintainer
#0 lore raw

v8 cover zram/zsmalloc promotion

Zram is a simple pseudo block device which can keep data on in-memory with compressed.[1]

It have been used for many embedded system for several years One of significant usecase is in-memory swap device. Because NAND which is very popular on most embedded device is weak for frequent write without good wear-level and slow I/O hurts system's responsiblity so zram is really good choice to use memory efficiently.

In previous trial, there was some argument[2] that zram has similar goal with zswap so let's merge zram's functionality into zswap via adding pseudo block device in zswap but I and some people(At least, Hugh and Rik) believe it's not a good idea. [2][3][4] and zswap might go writethrough model[5]. It makes clear difference zram and zswap.

Zram itself is simple/well-designed/good abstraciton so it has clear market(ex, Android, TV, ChromeOS, some Linux distro) which is never niche. :)

Another zram-blk's usecase is following as.
The admin can use it as tmpfs so it could help small memory system. The tmpfs is never good solution for swapless embedded system.

Patch 1 adds new Kconfig for zram to use page table method instead of copy.

Patch 2 adds more comment for zsmalloc.

Patch 3 moves zsmalloc under mm.

Patch 4 moves zram from driver/staging to driver/blocks, finally.

[1] http://en.wikipedia.org/wiki/Zram
[2] https://lkml.org/lkml/2013/8/21/54
[3] https://lkml.org/lkml/2013/11/13/570
[4] https://lkml.org/lkml/2013/11/7/318
[5] http://www.spinics.net/lists/linux-mm/msg65499.html

* From v7
* Remove unnecessary zswap VS zram comparison in cover letter.
* Add Reviewed-by/Acked-by I forgot.
* Remove exporting unmap_kernel_range patch. I will do if promotion is done.
* Move zsmalloc under mm - Hugh

Minchan Kim (3):
zsmalloc: add Kconfig for enabling page table method
zsmalloc: move it under mm
zram: promote zram from staging

Nitin Cupta (1):
zsmalloc: add more comment

 drivers/block/Kconfig                    |    2 +
 drivers/block/Makefile                   |    2 +
 drivers/block/zram/Kconfig               |   25 +
 drivers/block/zram/Makefile              |    3 +
 drivers/block/zram/zram.txt              |   77 +++
 drivers/block/zram/zram_drv.c            |  981 ++++++++++++++++++++++++++
 drivers/staging/Kconfig                  |    4 -
 drivers/staging/Makefile                 |    2 -
 drivers/staging/zram/Kconfig             |   25 -
 drivers/staging/zram/Makefile            |    3 -
 drivers/staging/zram/zram.txt            |   77 ---
 drivers/staging/zram/zram_drv.c          |  982 --------------------------
 drivers/staging/zram/zram_drv.h          |  125 ----
 drivers/staging/zsmalloc/Kconfig         |   11 -
 drivers/staging/zsmalloc/Makefile        |    3 -
 drivers/staging/zsmalloc/zsmalloc-main.c | 1063 -----------------------------
 drivers/staging/zsmalloc/zsmalloc.h      |   43 --
 include/linux/zram_drv.h                 |  124 ++++
 include/linux/zsmalloc.h                 |   50 ++
 mm/Kconfig                               |   25 +
 mm/Makefile                              |    1 +
 mm/zsmalloc.c                            | 1097 ++++++++++++++++++++++++++++++
 22 files changed, 2387 insertions(+), 2338 deletions(-)
 create mode 100644 drivers/block/zram/Kconfig
 create mode 100644 drivers/block/zram/Makefile
 create mode 100644 drivers/block/zram/zram.txt
 create mode 100644 drivers/block/zram/zram_drv.c
 delete mode 100644 drivers/staging/zram/Kconfig
 delete mode 100644 drivers/staging/zram/Makefile
 delete mode 100644 drivers/staging/zram/zram.txt
 delete mode 100644 drivers/staging/zram/zram_drv.c
 delete mode 100644 drivers/staging/zram/zram_drv.h
 delete mode 100644 drivers/staging/zsmalloc/Kconfig
 delete mode 100644 drivers/staging/zsmalloc/Makefile
 delete mode 100644 drivers/staging/zsmalloc/zsmalloc-main.c
 delete mode 100644 drivers/staging/zsmalloc/zsmalloc.h
 create mode 100644 include/linux/zram_drv.h
 create mode 100644 include/linux/zsmalloc.h
 create mode 100644 mm/zsmalloc.c
Signature · 7 lines
1.7.9.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
author maintainer
#1 lore raw

PATCH v8 1/4 zsmalloc: add Kconfig for enabling page table method

Zsmalloc has two methods 1) copy-based and 2) pte based to access objects that span two pages.
You can see history why we supported two approach from [1].

But it was bad choice that adding hard coding to select arch which want to use pte based method because there are lots of SoC in an architecure and they can have different cache size, CPU speed and so on so it would be better to expose it to user as selectable Kconfig option like Andrew Morton suggested.

[1] https://lkml.org/lkml/2012/7/11/58

---
 drivers/staging/zsmalloc/Kconfig         |   13 +++++++++++++
 drivers/staging/zsmalloc/zsmalloc-main.c |   19 ++++---------------
 2 files changed, 17 insertions(+), 15 deletions(-)
drivers/staging/zsmalloc/Kconfig +13 -0
index 0ae13cd0908e..9d1f2a24ad62 100644
@@ -9,3 +9,16 @@ config ZSMALLOC
 	  non-standard allocator interface where a handle, not a pointer, is
 	  returned by an alloc().  This handle must be mapped in order to
 	  access the allocated space.
+
+config PGTABLE_MAPPING
+	bool "Use page table mapping to access object in zsmalloc"
+	depends on ZSMALLOC
+	help
+	  By default, zsmalloc uses a copy-based object mapping method to
+	  access allocations that span two pages. However, if a particular
+	  architecture (ex, ARM) performs VM mapping faster than copying,
+	  then you should select this. This causes zsmalloc to use page table
+	  mapping rather than copying for object mapping.
+
+	  You can check speed with zsmalloc benchmark[1].
+	  [1] https://github.com/spartacus06/zsmalloc
drivers/staging/zsmalloc/zsmalloc-main.c +4 -15
index 1a67537dbc56..f57258fa0c9d 100644
@@ -218,19 +218,8 @@ struct zs_pool {
 #define CLASS_IDX_MASK	((1 << CLASS_IDX_BITS) - 1)
 #define FULLNESS_MASK	((1 << FULLNESS_BITS) - 1)
 
-/*
- * By default, zsmalloc uses a copy-based object mapping method to access
- * allocations that span two pages. However, if a particular architecture
- * performs VM mapping faster than copying, then it should be added here
- * so that USE_PGTABLE_MAPPING is defined. This causes zsmalloc to use
- * page table mapping rather than copying for object mapping.
- */
-#if defined(CONFIG_ARM) && !defined(MODULE)
-#define USE_PGTABLE_MAPPING
-#endif
-
 struct mapping_area {
-#ifdef USE_PGTABLE_MAPPING
+#ifdef CONFIG_PGTABLE_MAPPING
 	struct vm_struct *vm; /* vm area for mapping object that span pages */
 #else
 	char *vm_buf; /* copy buffer for objects that span pages */
@@ -622,7 +611,7 @@ static struct page *find_get_zspage(struct size_class *class)
 	return page;
 }
 
-#ifdef USE_PGTABLE_MAPPING
+#ifdef CONFIG_PGTABLE_MAPPING
 static inline int __zs_cpu_up(struct mapping_area *area)
 {
 	/*
@@ -660,7 +649,7 @@ static inline void __zs_unmap_object(struct mapping_area *area,
 	unmap_kernel_range(addr, PAGE_SIZE * 2);
 }
 
-#else /* USE_PGTABLE_MAPPING */
+#else /* CONFIG_PGTABLE_MAPPING */
 
 static inline int __zs_cpu_up(struct mapping_area *area)
 {
@@ -738,7 +727,7 @@ out:
 	pagefault_enable();
 }
 
-#endif /* USE_PGTABLE_MAPPING */
+#endif /* CONFIG_PGTABLE_MAPPING */
 
 static int zs_cpu_notifier(struct notifier_block *nb, unsigned long action,
 				void *pcpu)
Signature · 7 lines
1.7.9.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
author maintainer
#2 lore raw

PATCH v8 2/4 zsmalloc: add more comment

In reply to Minchan Kim

From: Nitin Cupta <[email protected]>

This patch adds lots of comments and it will help others to review and enhance.

---
 drivers/staging/zsmalloc/zsmalloc-main.c |   66 +++++++++++++++++++++++++-----
 drivers/staging/zsmalloc/zsmalloc.h      |    9 +++-
 2 files changed, 64 insertions(+), 11 deletions(-)
drivers/staging/zsmalloc/zsmalloc-main.c +56 -10
index f57258fa0c9d..52ebddd7fe8c 100644
@@ -10,16 +10,14 @@
  * Released under the terms of GNU General Public License Version 2.0
  */
 
-
 /*
- * This allocator is designed for use with zcache and zram. Thus, the
- * allocator is supposed to work well under low memory conditions. In
- * particular, it never attempts higher order page allocation which is
- * very likely to fail under memory pressure. On the other hand, if we
- * just use single (0-order) pages, it would suffer from very high
- * fragmentation -- any object of size PAGE_SIZE/2 or larger would occupy
- * an entire page. This was one of the major issues with its predecessor
- * (xvmalloc).
+ * This allocator is designed for use with zram. Thus, the allocator is
+ * supposed to work well under low memory conditions. In particular, it
+ * never attempts higher order page allocation which is very likely to
+ * fail under memory pressure. On the other hand, if we just use single
+ * (0-order) pages, it would suffer from very high fragmentation --
+ * any object of size PAGE_SIZE/2 or larger would occupy an entire page.
+ * This was one of the major issues with its predecessor (xvmalloc).
  *
  * To overcome these issues, zsmalloc allocates a bunch of 0-order pages
  * and links them together using various 'struct page' fields. These linked
@@ -27,6 +25,21 @@
  * page boundaries. The code refers to these linked pages as a single entity
  * called zspage.
  *
+ * For simplicity, zsmalloc can only allocate objects of size up to PAGE_SIZE
+ * since this satisfies the requirements of all its current users (in the
+ * worst case, page is incompressible and is thus stored "as-is" i.e. in
+ * uncompressed form). For allocation requests larger than this size, failure
+ * is returned (see zs_malloc).
+ *
+ * Additionally, zs_malloc() does not return a dereferenceable pointer.
+ * Instead, it returns an opaque handle (unsigned long) which encodes actual
+ * location of the allocated object. The reason for this indirection is that
+ * zsmalloc does not keep zspages permanently mapped since that would cause
+ * issues on 32-bit systems where the VA region for kernel space mappings
+ * is very small. So, before using the allocating memory, the object has to
+ * be mapped using zs_map_object() to get a usable pointer and subsequently
+ * unmapped using zs_unmap_object().
+ *
  * Following is how we use various fields and flags of underlying
  * struct page(s) to form a zspage.
  *
@@ -98,7 +111,7 @@
 
 /*
  * Object location (<PFN>, <obj_idx>) is encoded as
- * as single (void *) handle value.
+ * as single (unsigned long) handle value.
  *
  * Note that object index <obj_idx> is relative to system
  * page <PFN> it is stored in, so for each sub-page belonging
@@ -264,6 +277,13 @@ static void set_zspage_mapping(struct page *page, unsigned int class_idx,
 	page->mapping = (struct address_space *)m;
 }
 
+/*
+ * zsmalloc divides the pool into various size classes where each
+ * class maintains a list of zspages where each zspage is divided
+ * into equal sized chunks. Each allocation falls into one of these
+ * classes depending on its size. This function returns index of the
+ * size class which has chunk size big enough to hold the give size.
+ */
 static int get_size_class_index(int size)
 {
 	int idx = 0;
@@ -275,6 +295,13 @@ static int get_size_class_index(int size)
 	return idx;
 }
 
+/*
+ * For each size class, zspages are divided into different groups
+ * depending on how "full" they are. This was done so that we could
+ * easily find empty or nearly empty zspages when we try to shrink
+ * the pool (not yet implemented). This function returns fullness
+ * status of the given page.
+ */
 static enum fullness_group get_fullness_group(struct page *page)
 {
 	int inuse, max_objects;
@@ -296,6 +323,12 @@ static enum fullness_group get_fullness_group(struct page *page)
 	return fg;
 }
 
+/*
+ * Each size class maintains various freelists and zspages are assigned
+ * to one of these freelists based on the number of live objects they
+ * have. This functions inserts the given zspage into the freelist
+ * identified by <class, fullness_group>.
+ */
 static void insert_zspage(struct page *page, struct size_class *class,
 				enum fullness_group fullness)
 {
@@ -313,6 +346,10 @@ static void insert_zspage(struct page *page, struct size_class *class,
 	*head = page;
 }
 
+/*
+ * This function removes the given zspage from the freelist identified
+ * by <class, fullness_group>.
+ */
 static void remove_zspage(struct page *page, struct size_class *class,
 				enum fullness_group fullness)
 {
@@ -334,6 +371,15 @@ static void remove_zspage(struct page *page, struct size_class *class,
 	list_del_init(&page->lru);
 }
 
+/*
+ * Each size class maintains zspages in different fullness groups depending
+ * on the number of live objects they contain. When allocating or freeing
+ * objects, the fullness status of the page can change, say, from ALMOST_FULL
+ * to ALMOST_EMPTY when freeing an object. This function checks if such
+ * a status change has occurred for the given page and accordingly moves the
+ * page from the freelist of the old fullness group to that of the new
+ * fullness group.
+ */
 static enum fullness_group fix_fullness_group(struct zs_pool *pool,
 						struct page *page)
 {
drivers/staging/zsmalloc/zsmalloc.h +8 -1
index fbe6bec421aa..c2eb174b97ee 100644
@@ -18,12 +18,19 @@
 /*
  * zsmalloc mapping modes
  *
- * NOTE: These only make a difference when a mapped object spans pages
+ * NOTE: These only make a difference when a mapped object spans pages.
+ * They also have no effect when PGTABLE_MAPPING is selected.
  */
 enum zs_mapmode {
 	ZS_MM_RW, /* normal read-write mapping */
 	ZS_MM_RO, /* read-only (no copy-out at unmap time) */
 	ZS_MM_WO /* write-only (no copy-in at map time) */
+	/*
+	 * NOTE: ZS_MM_WO should only be used for initializing new
+	 * (uninitialized) allocations.  Partial writes to already
+	 * initialized allocations should use ZS_MM_RW to preserve the
+	 * existing data.
+	 */
 };
 
 struct zs_pool;
Signature · 7 lines
1.7.9.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
author maintainer
#3 lore raw

PATCH v8 3/4 zsmalloc: move it under mm

In reply to Minchan Kim

This patch moves zsmalloc under mm directory.

Before that, description will explain why we have needed custom allocator.

Zsmalloc is a new slab-based memory allocator for storing compressed pages. It is designed for low fragmentation and high allocation success rate on large object, but <= PAGE_SIZE allocations.

zsmalloc differs from the kernel slab allocator in two primary ways to achieve these design goals.

zsmalloc never requires high order page allocations to back slabs, or "size classes" in zsmalloc terms. Instead it allows multiple single-order pages to be stitched together into a "zspage" which backs the slab. This allows for higher allocation success rate under memory pressure.

Also, zsmalloc allows objects to span page boundaries within the zspage. This allows for lower fragmentation than could be had with the kernel slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the kernel slab allocator, if a page compresses to 60% of it original size, the memory savings gained through compression is lost in fragmentation because another object of the same size can't be stored in the leftover space.

This ability to span pages results in zsmalloc allocations not being directly addressable by the user. The user is given an non-dereferencable handle in response to an allocation request. That handle must be mapped, using zs_map_object(), which returns a pointer to the mapped region that can be used. The mapping is necessary since the object data may reside in two different noncontigious pages.

The zsmalloc fulfills the allocation needs for zram perfectly

---
 drivers/staging/Kconfig                  |    2 -
 drivers/staging/Makefile                 |    1 -
 drivers/staging/zram/zram_drv.h          |    3 +-
 drivers/staging/zsmalloc/Kconfig         |   24 -
 drivers/staging/zsmalloc/Makefile        |    3 -
 drivers/staging/zsmalloc/zsmalloc-main.c | 1098 ------------------------------
 drivers/staging/zsmalloc/zsmalloc.h      |   50 --
 include/linux/zsmalloc.h                 |   50 ++
 mm/Kconfig                               |   25 +
 mm/Makefile                              |    1 +
 mm/zsmalloc.c                            | 1097 +++++++++++++++++++++++++++++
 11 files changed, 1174 insertions(+), 1180 deletions(-)
 delete mode 100644 drivers/staging/zsmalloc/Kconfig
 delete mode 100644 drivers/staging/zsmalloc/Makefile
 delete mode 100644 drivers/staging/zsmalloc/zsmalloc-main.c
 delete mode 100644 drivers/staging/zsmalloc/zsmalloc.h
 create mode 100644 include/linux/zsmalloc.h
 create mode 100644 mm/zsmalloc.c
drivers/staging/Kconfig +0 -2
index 3bfdaa8d80a9..dd837635829c 100644
@@ -74,8 +74,6 @@ source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
 
-source "drivers/staging/zsmalloc/Kconfig"
-
 source "drivers/staging/zram/Kconfig"
 
 source "drivers/staging/wlags49_h2/Kconfig"
drivers/staging/Makefile +0 -1
index b0d3303b4680..c918dc4e9129 100644
@@ -32,7 +32,6 @@ obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_DX_SEP)            += sep/
 obj-$(CONFIG_IIO)		+= iio/
 obj-$(CONFIG_ZRAM)		+= zram/
-obj-$(CONFIG_ZSMALLOC)		+= zsmalloc/
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
 obj-$(CONFIG_WLAGS49_H25)	+= wlags49_h25/
 obj-$(CONFIG_FB_SM7XX)		+= sm7xxfb/
drivers/staging/zram/zram_drv.h +1 -2
index 97a3acf6ab76..d8f6596513c3 100644
@@ -17,8 +17,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
-
-#include "../zsmalloc/zsmalloc.h"
+#include <linux/zsmalloc.h>
 
 /*
  * Some arbitrary value. This is just to catch
drivers/staging/zsmalloc/Kconfig deleted +0 -24
deleted file mode 100644
index 9d1f2a24ad62..000000000000
@@ -1,24 +0,0 @@
-config ZSMALLOC
-	bool "Memory allocator for compressed pages"
-	depends on MMU
-	default n
-	help
-	  zsmalloc is a slab-based memory allocator designed to store
-	  compressed RAM pages.  zsmalloc uses virtual memory mapping
-	  in order to reduce fragmentation.  However, this results in a
-	  non-standard allocator interface where a handle, not a pointer, is
-	  returned by an alloc().  This handle must be mapped in order to
-	  access the allocated space.
-
-config PGTABLE_MAPPING
-	bool "Use page table mapping to access object in zsmalloc"
-	depends on ZSMALLOC
-	help
-	  By default, zsmalloc uses a copy-based object mapping method to
-	  access allocations that span two pages. However, if a particular
-	  architecture (ex, ARM) performs VM mapping faster than copying,
-	  then you should select this. This causes zsmalloc to use page table
-	  mapping rather than copying for object mapping.
-
-	  You can check speed with zsmalloc benchmark[1].
-	  [1] https://github.com/spartacus06/zsmalloc
drivers/staging/zsmalloc/Makefile deleted +0 -3
deleted file mode 100644
index b134848a590d..000000000000
@@ -1,3 +0,0 @@
-zsmalloc-y 		:= zsmalloc-main.o
-
-obj-$(CONFIG_ZSMALLOC)	+= zsmalloc.o
drivers/staging/zsmalloc/zsmalloc-main.c deleted +0 -1098

1,098 lines not on this page · raw message

drivers/staging/zsmalloc/zsmalloc.h deleted +0 -50

50 lines not on this page · raw message

include/linux/zsmalloc.h new file +50 -0

50 lines not on this page · raw message

mm/Kconfig +25 -0
index eb69f352401d..8f1d2301a410 100644
@@ -552,3 +552,28 @@ config MEM_SOFT_DIRTY
 	  it can be cleared by hands.
 
 	  See Documentation/vm/soft-dirty.txt for more details.
+
+config ZSMALLOC
+	bool "Memory allocator for compressed pages"
+	depends on MMU
+	default n
+	help
+	  zsmalloc is a slab-based memory allocator designed to store
+	  compressed RAM pages.  zsmalloc uses virtual memory mapping
+	  in order to reduce fragmentation.  However, this results in a
+	  non-standard allocator interface where a handle, not a pointer, is
+	  returned by an alloc().  This handle must be mapped in order to
+	  access the allocated space.
+
+config PGTABLE_MAPPING
+	bool "Use page table mapping to access object in zsmalloc"
+	depends on ZSMALLOC
+	help
+	  By default, zsmalloc uses a copy-based object mapping method to
+	  access allocations that span two pages. However, if a particular
+	  architecture (ex, ARM) performs VM mapping faster than copying,
+	  then you should select this. This causes zsmalloc to use page table
+	  mapping rather than copying for object mapping.
+
+	  You can check speed with zsmalloc benchmark[1].
+	  [1] https://github.com/spartacus06/zsmalloc
mm/Makefile +1 -0
index cd0abd8eb50d..73370753ee4e 100644
@@ -61,3 +61,4 @@ obj-$(CONFIG_CLEANCACHE) += cleancache.o
 obj-$(CONFIG_MEMORY_ISOLATION) += page_isolation.o
 obj-$(CONFIG_PAGE_OWNER) += pageowner.o
 obj-$(CONFIG_ZBUD)	+= zbud.o
+obj-$(CONFIG_ZSMALLOC)	+= zsmalloc.o
mm/zsmalloc.c new file +1097 -0

1,097 lines not on this page · raw message

Signature · 7 lines
1.7.9.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
author maintainer
#4 lore raw

PATCH v8 4/4 zram: promote zram from staging

In reply to Minchan Kim

Zram has lived in staging for a LONG LONG time and have been fixed/improved by many contributors so code is clean and stable now. Of course, there are lots of product using zram in real practice.

The major TV companys have used zram as swap since two years ago and recently our production team released android smart phone with zram which is used as swap, too and recently Android Kitkat start to use zram for small memory smart phone. And there was a report Google released their ChromeOS with zram, too and cyanogenmod have been used zram long time ago. And I heard some disto have used zram block device for tmpfs. In addition, I saw many report from many other peoples. For example, Lubuntu start to use it.

The benefit of zram is very clear. With my experience, one of the benefit was to remove jitter of video application with backgroud memory pressure. It would be effect of efficient memory usage by compression but more issue is whether swap is there or not in the system. Recent mobile platforms have used JAVA so there are many anonymous pages. But embedded system normally are reluctant to use eMMC or SDCard as swap because there is wear-leveling and latency issues so if we do not use swap, it means we can't reclaim anoymous pages and at last, we could encounter OOM kill. :(

Although we have real storage as swap, it was a problem, too. Because it sometime ends up making system very unresponsible caused by slow swap storage performance.

Quote from Luigi on Google
"
Since Chrome OS was mentioned: the main reason why we don't use swap to a disk (rotating or SSD) is because it doesn't degrade gracefully and leads to a bad interactive experience. Generally we prefer to manage RAM at a higher level, by transparently killing and restarting processes. But we noticed that zram is fast enough to be competitive with the latter, and it lets us make more efficient use of the available RAM.
"
and he announced. http://www.spinics.net/lists/linux-mm/msg57717.html

Other uses case is to use zram for block device. Zram is block device so anyone can format the block device and mount on it so some guys on the internet start zram as /var/tmp.
http://forums.gentoo.org/viewtopic-t-838198-start-0.html

Let's promote zram and enhance/maintain it instead of removing.

---
 drivers/block/Kconfig           |    2 +
 drivers/block/Makefile          |    2 +
 drivers/block/zram/Kconfig      |   25 +
 drivers/block/zram/Makefile     |    3 +
 drivers/block/zram/zram.txt     |   77 +++
 drivers/block/zram/zram_drv.c   |  981 ++++++++++++++++++++++++++++++++++++++
 drivers/staging/Kconfig         |    2 -
 drivers/staging/Makefile        |    1 -
 drivers/staging/zram/Kconfig    |   25 -
 drivers/staging/zram/Makefile   |    3 -
 drivers/staging/zram/zram.txt   |   77 ---
 drivers/staging/zram/zram_drv.c |  982 ---------------------------------------
 drivers/staging/zram/zram_drv.h |  124 -----
 include/linux/zram_drv.h        |  124 +++++
 14 files changed, 1214 insertions(+), 1214 deletions(-)
 create mode 100644 drivers/block/zram/Kconfig
 create mode 100644 drivers/block/zram/Makefile
 create mode 100644 drivers/block/zram/zram.txt
 create mode 100644 drivers/block/zram/zram_drv.c
 delete mode 100644 drivers/staging/zram/Kconfig
 delete mode 100644 drivers/staging/zram/Makefile
 delete mode 100644 drivers/staging/zram/zram.txt
 delete mode 100644 drivers/staging/zram/zram_drv.c
 delete mode 100644 drivers/staging/zram/zram_drv.h
 create mode 100644 include/linux/zram_drv.h
drivers/block/Kconfig +2 -0
index 86b9f37d102e..28b6bf2fe886 100644
@@ -108,6 +108,8 @@ source "drivers/block/paride/Kconfig"
 
 source "drivers/block/mtip32xx/Kconfig"
 
+source "drivers/block/zram/Kconfig"
+
 config BLK_CPQ_DA
 	tristate "Compaq SMART2 support"
 	depends on PCI && VIRT_TO_BUS && 0
drivers/block/Makefile +2 -0
index 8cc98cd0d4a8..1beffa2f3a5d 100644
@@ -44,6 +44,8 @@ obj-$(CONFIG_BLK_DEV_PCIESSD_MTIP32XX)	+= mtip32xx/
 obj-$(CONFIG_BLK_DEV_RSXX) += rsxx/
 obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_blk.o
 
+obj-$(CONFIG_ZRAM) += zram/
+
 nvme-y		:= nvme-core.o nvme-scsi.o
 skd-y		:= skd_main.o
 swim_mod-y	:= swim.o swim_asm.o
drivers/block/zram/Kconfig new file +25 -0
new file mode 100644
index 000000000000..983314c41349
@@ -0,0 +1,25 @@
+config ZRAM
+	tristate "Compressed RAM block device support"
+	depends on BLOCK && SYSFS && ZSMALLOC
+	select LZO_COMPRESS
+	select LZO_DECOMPRESS
+	default n
+	help
+	  Creates virtual block devices called /dev/zramX (X = 0, 1, ...).
+	  Pages written to these disks are compressed and stored in memory
+	  itself. These disks allow very fast I/O and compression provides
+	  good amounts of memory savings.
+
+	  It has several use cases, for example: /tmp storage, use as swap
+	  disks and maybe many more.
+
+	  See zram.txt for more information.
+	  Project home: <https://compcache.googlecode.com/>
+
+config ZRAM_DEBUG
+	bool "Compressed RAM block device debug support"
+	depends on ZRAM
+	default n
+	help
+	  This option adds additional debugging code to the compressed
+	  RAM block device driver.
drivers/block/zram/Makefile new file +3 -0
new file mode 100644
index 000000000000..cb0f9ced6a93
@@ -0,0 +1,3 @@
+zram-y	:=	zram_drv.o
+
+obj-$(CONFIG_ZRAM)	+=	zram.o
drivers/block/zram/zram.txt new file +77 -0

77 lines not on this page · raw message

drivers/block/zram/zram_drv.c new file +981 -0

981 lines not on this page · raw message

drivers/staging/Kconfig +0 -2
index dd837635829c..e30adf86623d 100644
@@ -74,8 +74,6 @@ source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
 
-source "drivers/staging/zram/Kconfig"
-
 source "drivers/staging/wlags49_h2/Kconfig"
 
 source "drivers/staging/wlags49_h25/Kconfig"
drivers/staging/Makefile +0 -1
index c918dc4e9129..9281bf5ddc2b 100644
@@ -31,7 +31,6 @@ obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_DX_SEP)            += sep/
 obj-$(CONFIG_IIO)		+= iio/
-obj-$(CONFIG_ZRAM)		+= zram/
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
 obj-$(CONFIG_WLAGS49_H25)	+= wlags49_h25/
 obj-$(CONFIG_FB_SM7XX)		+= sm7xxfb/
drivers/staging/zram/Kconfig deleted +0 -25
deleted file mode 100644
index 983314c41349..000000000000
@@ -1,25 +0,0 @@
-config ZRAM
-	tristate "Compressed RAM block device support"
-	depends on BLOCK && SYSFS && ZSMALLOC
-	select LZO_COMPRESS
-	select LZO_DECOMPRESS
-	default n
-	help
-	  Creates virtual block devices called /dev/zramX (X = 0, 1, ...).
-	  Pages written to these disks are compressed and stored in memory
-	  itself. These disks allow very fast I/O and compression provides
-	  good amounts of memory savings.
-
-	  It has several use cases, for example: /tmp storage, use as swap
-	  disks and maybe many more.
-
-	  See zram.txt for more information.
-	  Project home: <https://compcache.googlecode.com/>
-
-config ZRAM_DEBUG
-	bool "Compressed RAM block device debug support"
-	depends on ZRAM
-	default n
-	help
-	  This option adds additional debugging code to the compressed
-	  RAM block device driver.
drivers/staging/zram/Makefile deleted +0 -3
deleted file mode 100644
index cb0f9ced6a93..000000000000
@@ -1,3 +0,0 @@
-zram-y	:=	zram_drv.o
-
-obj-$(CONFIG_ZRAM)	+=	zram.o
drivers/staging/zram/zram.txt deleted +0 -77

77 lines not on this page · raw message

drivers/staging/zram/zram_drv.c deleted +0 -753

753 lines not on this page · raw message

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#5 lore raw

Re: [PATCH v8 4/4] zram: promote zram from staging

Quoted 49 lines · Minchan Kim

Zram has lived in staging for a LONG LONG time and have been fixed/improved by many contributors so code is clean and stable now. Of course, there are lots of product using zram in real practice.

The major TV companys have used zram as swap since two years ago and recently our production team released android smart phone with zram which is used as swap, too and recently Android Kitkat start to use zram for small memory smart phone. And there was a report Google released their ChromeOS with zram, too and cyanogenmod have been used zram long time ago. And I heard some disto have used zram block device for tmpfs. In addition, I saw many report from many other peoples. For example, Lubuntu start to use it.

The benefit of zram is very clear. With my experience, one of the benefit was to remove jitter of video application with backgroud memory pressure. It would be effect of efficient memory usage by compression but more issue is whether swap is there or not in the system. Recent mobile platforms have used JAVA so there are many anonymous pages. But embedded system normally are reluctant to use eMMC or SDCard as swap because there is wear-leveling and latency issues so if we do not use swap, it means we can't reclaim anoymous pages and at last, we could encounter OOM kill. :(

Although we have real storage as swap, it was a problem, too. Because it sometime ends up making system very unresponsible caused by slow swap storage performance.

Quote from Luigi on Google
"
Since Chrome OS was mentioned: the main reason why we don't use swap to a disk (rotating or SSD) is because it doesn't degrade gracefully and leads to a bad interactive experience. Generally we prefer to manage RAM at a higher level, by transparently killing and restarting processes. But we noticed that zram is fast enough to be competitive with the latter, and it lets us make more efficient use of the available RAM.
"
and he announced. http://www.spinics.net/lists/linux-mm/msg57717.html

Other uses case is to use zram for block device. Zram is block device so anyone can format the block device and mount on it so some guys on the internet start zram as /var/tmp.
http://forums.gentoo.org/viewtopic-t-838198-start-0.html

Let's promote zram and enhance/maintain it instead of removing.

Quoted 6 lines
---
 drivers/block/Kconfig           |    2 +
 drivers/block/Makefile          |    2 +
 drivers/block/zram/Kconfig      |   25 +
 drivers/block/zram/Makefile     |    3 +
 drivers/block/zram/zram.txt     |   77 +++

Shouldn't that go in Documentation/ directory?
In Documentation/blockdev/ maybe.

Jerome

Quoted 2,066 lines
 drivers/block/zram/zram_drv.c   |  981 ++++++++++++++++++++++++++++++++++++++
 drivers/staging/Kconfig         |    2 -
 drivers/staging/Makefile        |    1 -
 drivers/staging/zram/Kconfig    |   25 -
 drivers/staging/zram/Makefile   |    3 -
 drivers/staging/zram/zram.txt   |   77 ---
 drivers/staging/zram/zram_drv.c |  982 ---------------------------------------
 drivers/staging/zram/zram_drv.h |  124 -----
 include/linux/zram_drv.h        |  124 +++++
 14 files changed, 1214 insertions(+), 1214 deletions(-)
 create mode 100644 drivers/block/zram/Kconfig
 create mode 100644 drivers/block/zram/Makefile
 create mode 100644 drivers/block/zram/zram.txt
 create mode 100644 drivers/block/zram/zram_drv.c
 delete mode 100644 drivers/staging/zram/Kconfig
 delete mode 100644 drivers/staging/zram/Makefile
 delete mode 100644 drivers/staging/zram/zram.txt
 delete mode 100644 drivers/staging/zram/zram_drv.c
 delete mode 100644 drivers/staging/zram/zram_drv.h
 create mode 100644 include/linux/zram_drv.h
drivers/block/Kconfig +2 -0
index 86b9f37d102e..28b6bf2fe886 100644
@@ -108,6 +108,8 @@ source "drivers/block/paride/Kconfig"
 
 source "drivers/block/mtip32xx/Kconfig"
 
+source "drivers/block/zram/Kconfig"
+
 config BLK_CPQ_DA
 	tristate "Compaq SMART2 support"
 	depends on PCI && VIRT_TO_BUS && 0
drivers/block/Makefile +2 -0
index 8cc98cd0d4a8..1beffa2f3a5d 100644
@@ -44,6 +44,8 @@ obj-$(CONFIG_BLK_DEV_PCIESSD_MTIP32XX)	+= mtip32xx/
 obj-$(CONFIG_BLK_DEV_RSXX) += rsxx/
 obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_blk.o
 
+obj-$(CONFIG_ZRAM) += zram/
+
 nvme-y		:= nvme-core.o nvme-scsi.o
 skd-y		:= skd_main.o
 swim_mod-y	:= swim.o swim_asm.o
drivers/block/zram/Kconfig new file +25 -0
new file mode 100644
index 000000000000..983314c41349
@@ -0,0 +1,25 @@
+config ZRAM
+	tristate "Compressed RAM block device support"
+	depends on BLOCK && SYSFS && ZSMALLOC
+	select LZO_COMPRESS
+	select LZO_DECOMPRESS
+	default n
+	help
+	  Creates virtual block devices called /dev/zramX (X = 0, 1, ...).
+	  Pages written to these disks are compressed and stored in memory
+	  itself. These disks allow very fast I/O and compression provides
+	  good amounts of memory savings.
+
+	  It has several use cases, for example: /tmp storage, use as swap
+	  disks and maybe many more.
+
+	  See zram.txt for more information.
+	  Project home: <https://compcache.googlecode.com/>
+
+config ZRAM_DEBUG
+	bool "Compressed RAM block device debug support"
+	depends on ZRAM
+	default n
+	help
+	  This option adds additional debugging code to the compressed
+	  RAM block device driver.
drivers/block/zram/Makefile new file +3 -0
new file mode 100644
index 000000000000..cb0f9ced6a93
@@ -0,0 +1,3 @@
+zram-y	:=	zram_drv.o
+
+obj-$(CONFIG_ZRAM)	+=	zram.o
drivers/block/zram/zram.txt new file +77 -0
new file mode 100644
index 000000000000..765d790ae831
@@ -0,0 +1,77 @@
+zram: Compressed RAM based block devices
+----------------------------------------
+
+Project home: http://compcache.googlecode.com/
+
+* Introduction
+
+The zram module creates RAM based block devices named /dev/zram<id>
+(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
+in memory itself. These disks allow very fast I/O and compression provides
+good amounts of memory savings. Some of the usecases include /tmp storage,
+use as swap disks, various caches under /var and maybe many more :)
+
+Statistics for individual zram devices are exported through sysfs nodes at
+/sys/block/zram<id>/
+
+* Usage
+
+Following shows a typical sequence of steps for using zram.
+
+1) Load Module:
+	modprobe zram num_devices=4
+	This creates 4 devices: /dev/zram{0,1,2,3}
+	(num_devices parameter is optional. Default: 1)
+
+2) Set Disksize
+        Set disk size by writing the value to sysfs node 'disksize'.
+        The value can be either in bytes or you can use mem suffixes.
+        Examples:
+            # Initialize /dev/zram0 with 50MB disksize
+            echo $((50*1024*1024)) > /sys/block/zram0/disksize
+
+            # Using mem suffixes
+            echo 256K > /sys/block/zram0/disksize
+            echo 512M > /sys/block/zram0/disksize
+            echo 1G > /sys/block/zram0/disksize
+
+3) Activate:
+	mkswap /dev/zram0
+	swapon /dev/zram0
+
+	mkfs.ext4 /dev/zram1
+	mount /dev/zram1 /tmp
+
+4) Stats:
+	Per-device statistics are exported as various nodes under
+	/sys/block/zram<id>/
+		disksize
+		num_reads
+		num_writes
+		invalid_io
+		notify_free
+		discard
+		zero_pages
+		orig_data_size
+		compr_data_size
+		mem_used_total
+
+5) Deactivate:
+	swapoff /dev/zram0
+	umount /dev/zram1
+
+6) Reset:
+	Write any positive value to 'reset' sysfs node
+	echo 1 > /sys/block/zram0/reset
+	echo 1 > /sys/block/zram1/reset
+
+	This frees all the memory allocated for the given device and
+	resets the disksize to zero. You must set the disksize again
+	before reusing the device.
+
+Please report any problems at:
+ - Mailing list: linux-mm-cc at laptop dot org
+ - Issue tracker: http://code.google.com/p/compcache/issues/list
+
+Nitin Gupta
[email protected]
drivers/block/zram/zram_drv.c new file +981 -0
new file mode 100644
index 000000000000..853c980e6ded
@@ -0,0 +1,981 @@
+/*
+ * Compressed RAM block device
+ *
+ * Copyright (C) 2008, 2009, 2010  Nitin Gupta
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ * Project home: http://compcache.googlecode.com
+ */
+
+#define KMSG_COMPONENT "zram"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#ifdef CONFIG_ZRAM_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bio.h>
+#include <linux/bitops.h>
+#include <linux/blkdev.h>
+#include <linux/buffer_head.h>
+#include <linux/device.h>
+#include <linux/genhd.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/lzo.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <linux/zram_drv.h>
+
+/* Globals */
+static int zram_major;
+static struct zram *zram_devices;
+
+/* Module params (documentation at end) */
+static unsigned int num_devices = 1;
+
+static inline struct zram *dev_to_zram(struct device *dev)
+{
+	return (struct zram *)dev_to_disk(dev)->private_data;
+}
+
+static ssize_t disksize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n", zram->disksize);
+}
+
+static ssize_t initstate_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%u\n", zram->init_done);
+}
+
+static ssize_t num_reads_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n",
+			(u64)atomic64_read(&zram->stats.num_reads));
+}
+
+static ssize_t num_writes_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n",
+			(u64)atomic64_read(&zram->stats.num_writes));
+}
+
+static ssize_t invalid_io_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n",
+			(u64)atomic64_read(&zram->stats.invalid_io));
+}
+
+static ssize_t notify_free_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n",
+			(u64)atomic64_read(&zram->stats.notify_free));
+}
+
+static ssize_t zero_pages_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%u\n", zram->stats.pages_zero);
+}
+
+static ssize_t orig_data_size_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n",
+		(u64)(zram->stats.pages_stored) << PAGE_SHIFT);
+}
+
+static ssize_t compr_data_size_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return sprintf(buf, "%llu\n",
+			(u64)atomic64_read(&zram->stats.compr_size));
+}
+
+static ssize_t mem_used_total_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	u64 val = 0;
+	struct zram *zram = dev_to_zram(dev);
+	struct zram_meta *meta = zram->meta;
+
+	down_read(&zram->init_lock);
+	if (zram->init_done)
+		val = zs_get_total_size_bytes(meta->mem_pool);
+	up_read(&zram->init_lock);
+
+	return sprintf(buf, "%llu\n", val);
+}
+
+static int zram_test_flag(struct zram_meta *meta, u32 index,
+			enum zram_pageflags flag)
+{
+	return meta->table[index].flags & BIT(flag);
+}
+
+static void zram_set_flag(struct zram_meta *meta, u32 index,
+			enum zram_pageflags flag)
+{
+	meta->table[index].flags |= BIT(flag);
+}
+
+static void zram_clear_flag(struct zram_meta *meta, u32 index,
+			enum zram_pageflags flag)
+{
+	meta->table[index].flags &= ~BIT(flag);
+}
+
+static inline int is_partial_io(struct bio_vec *bvec)
+{
+	return bvec->bv_len != PAGE_SIZE;
+}
+
+/*
+ * Check if request is within bounds and aligned on zram logical blocks.
+ */
+static inline int valid_io_request(struct zram *zram, struct bio *bio)
+{
+	u64 start, end, bound;
+
+	/* unaligned request */
+	if (unlikely(bio->bi_sector & (ZRAM_SECTOR_PER_LOGICAL_BLOCK - 1)))
+		return 0;
+	if (unlikely(bio->bi_size & (ZRAM_LOGICAL_BLOCK_SIZE - 1)))
+		return 0;
+
+	start = bio->bi_sector;
+	end = start + (bio->bi_size >> SECTOR_SHIFT);
+	bound = zram->disksize >> SECTOR_SHIFT;
+	/* out of range range */
+	if (unlikely(start >= bound || end > bound || start > end))
+		return 0;
+
+	/* I/O request is valid */
+	return 1;
+}
+
+static void zram_meta_free(struct zram_meta *meta)
+{
+	zs_destroy_pool(meta->mem_pool);
+	kfree(meta->compress_workmem);
+	free_pages((unsigned long)meta->compress_buffer, 1);
+	vfree(meta->table);
+	kfree(meta);
+}
+
+static struct zram_meta *zram_meta_alloc(u64 disksize)
+{
+	size_t num_pages;
+	struct zram_meta *meta = kmalloc(sizeof(*meta), GFP_KERNEL);
+	if (!meta)
+		goto out;
+
+	meta->compress_workmem = kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
+	if (!meta->compress_workmem)
+		goto free_meta;
+
+	meta->compress_buffer =
+		(void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
+	if (!meta->compress_buffer) {
+		pr_err("Error allocating compressor buffer space\n");
+		goto free_workmem;
+	}
+
+	num_pages = disksize >> PAGE_SHIFT;
+	meta->table = vzalloc(num_pages * sizeof(*meta->table));
+	if (!meta->table) {
+		pr_err("Error allocating zram address table\n");
+		goto free_buffer;
+	}
+
+	meta->mem_pool = zs_create_pool(GFP_NOIO | __GFP_HIGHMEM);
+	if (!meta->mem_pool) {
+		pr_err("Error creating memory pool\n");
+		goto free_table;
+	}
+
+	return meta;
+
+free_table:
+	vfree(meta->table);
+free_buffer:
+	free_pages((unsigned long)meta->compress_buffer, 1);
+free_workmem:
+	kfree(meta->compress_workmem);
+free_meta:
+	kfree(meta);
+	meta = NULL;
+out:
+	return meta;
+}
+
+static void update_position(u32 *index, int *offset, struct bio_vec *bvec)
+{
+	if (*offset + bvec->bv_len >= PAGE_SIZE)
+		(*index)++;
+	*offset = (*offset + bvec->bv_len) % PAGE_SIZE;
+}
+
+static int page_zero_filled(void *ptr)
+{
+	unsigned int pos;
+	unsigned long *page;
+
+	page = (unsigned long *)ptr;
+
+	for (pos = 0; pos != PAGE_SIZE / sizeof(*page); pos++) {
+		if (page[pos])
+			return 0;
+	}
+
+	return 1;
+}
+
+static void handle_zero_page(struct bio_vec *bvec)
+{
+	struct page *page = bvec->bv_page;
+	void *user_mem;
+
+	user_mem = kmap_atomic(page);
+	if (is_partial_io(bvec))
+		memset(user_mem + bvec->bv_offset, 0, bvec->bv_len);
+	else
+		clear_page(user_mem);
+	kunmap_atomic(user_mem);
+
+	flush_dcache_page(page);
+}
+
+static void zram_free_page(struct zram *zram, size_t index)
+{
+	struct zram_meta *meta = zram->meta;
+	unsigned long handle = meta->table[index].handle;
+	u16 size = meta->table[index].size;
+
+	if (unlikely(!handle)) {
+		/*
+		 * No memory is allocated for zero filled pages.
+		 * Simply clear zero page flag.
+		 */
+		if (zram_test_flag(meta, index, ZRAM_ZERO)) {
+			zram_clear_flag(meta, index, ZRAM_ZERO);
+			zram->stats.pages_zero--;
+		}
+		return;
+	}
+
+	if (unlikely(size > max_zpage_size))
+		zram->stats.bad_compress--;
+
+	zs_free(meta->mem_pool, handle);
+
+	if (size <= PAGE_SIZE / 2)
+		zram->stats.good_compress--;
+
+	atomic64_sub(meta->table[index].size, &zram->stats.compr_size);
+	zram->stats.pages_stored--;
+
+	meta->table[index].handle = 0;
+	meta->table[index].size = 0;
+}
+
+static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
+{
+	int ret = LZO_E_OK;
+	size_t clen = PAGE_SIZE;
+	unsigned char *cmem;
+	struct zram_meta *meta = zram->meta;
+	unsigned long handle = meta->table[index].handle;
+
+	if (!handle || zram_test_flag(meta, index, ZRAM_ZERO)) {
+		clear_page(mem);
+		return 0;
+	}
+
+	cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_RO);
+	if (meta->table[index].size == PAGE_SIZE)
+		copy_page(mem, cmem);
+	else
+		ret = lzo1x_decompress_safe(cmem, meta->table[index].size,
+						mem, &clen);
+	zs_unmap_object(meta->mem_pool, handle);
+
+	/* Should NEVER happen. Return bio error if it does. */
+	if (unlikely(ret != LZO_E_OK)) {
+		pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
+		atomic64_inc(&zram->stats.failed_reads);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
+			  u32 index, int offset, struct bio *bio)
+{
+	int ret;
+	struct page *page;
+	unsigned char *user_mem, *uncmem = NULL;
+	struct zram_meta *meta = zram->meta;
+	page = bvec->bv_page;
+
+	if (unlikely(!meta->table[index].handle) ||
+			zram_test_flag(meta, index, ZRAM_ZERO)) {
+		handle_zero_page(bvec);
+		return 0;
+	}
+
+	if (is_partial_io(bvec))
+		/* Use  a temporary buffer to decompress the page */
+		uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
+
+	user_mem = kmap_atomic(page);
+	if (!is_partial_io(bvec))
+		uncmem = user_mem;
+
+	if (!uncmem) {
+		pr_info("Unable to allocate temp memory\n");
+		ret = -ENOMEM;
+		goto out_cleanup;
+	}
+
+	ret = zram_decompress_page(zram, uncmem, index);
+	/* Should NEVER happen. Return bio error if it does. */
+	if (unlikely(ret != LZO_E_OK))
+		goto out_cleanup;
+
+	if (is_partial_io(bvec))
+		memcpy(user_mem + bvec->bv_offset, uncmem + offset,
+				bvec->bv_len);
+
+	flush_dcache_page(page);
+	ret = 0;
+out_cleanup:
+	kunmap_atomic(user_mem);
+	if (is_partial_io(bvec))
+		kfree(uncmem);
+	return ret;
+}
+
+static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
+			   int offset)
+{
+	int ret = 0;
+	size_t clen;
+	unsigned long handle;
+	struct page *page;
+	unsigned char *user_mem, *cmem, *src, *uncmem = NULL;
+	struct zram_meta *meta = zram->meta;
+
+	page = bvec->bv_page;
+	src = meta->compress_buffer;
+
+	if (is_partial_io(bvec)) {
+		/*
+		 * This is a partial IO. We need to read the full page
+		 * before to write the changes.
+		 */
+		uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
+		if (!uncmem) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		ret = zram_decompress_page(zram, uncmem, index);
+		if (ret)
+			goto out;
+	}
+
+	user_mem = kmap_atomic(page);
+
+	if (is_partial_io(bvec)) {
+		memcpy(uncmem + offset, user_mem + bvec->bv_offset,
+		       bvec->bv_len);
+		kunmap_atomic(user_mem);
+		user_mem = NULL;
+	} else {
+		uncmem = user_mem;
+	}
+
+	if (page_zero_filled(uncmem)) {
+		kunmap_atomic(user_mem);
+		/* Free memory associated with this sector now. */
+		zram_free_page(zram, index);
+
+		zram->stats.pages_zero++;
+		zram_set_flag(meta, index, ZRAM_ZERO);
+		ret = 0;
+		goto out;
+	}
+
+	/*
+	 * zram_slot_free_notify could miss free so that let's
+	 * double check.
+	 */
+	if (unlikely(meta->table[index].handle ||
+			zram_test_flag(meta, index, ZRAM_ZERO)))
+		zram_free_page(zram, index);
+
+	ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen,
+			       meta->compress_workmem);
+
+	if (!is_partial_io(bvec)) {
+		kunmap_atomic(user_mem);
+		user_mem = NULL;
+		uncmem = NULL;
+	}
+
+	if (unlikely(ret != LZO_E_OK)) {
+		pr_err("Compression failed! err=%d\n", ret);
+		goto out;
+	}
+
+	if (unlikely(clen > max_zpage_size)) {
+		zram->stats.bad_compress++;
+		clen = PAGE_SIZE;
+		src = NULL;
+		if (is_partial_io(bvec))
+			src = uncmem;
+	}
+
+	handle = zs_malloc(meta->mem_pool, clen);
+	if (!handle) {
+		pr_info("Error allocating memory for compressed page: %u, size=%zu\n",
+			index, clen);
+		ret = -ENOMEM;
+		goto out;
+	}
+	cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_WO);
+
+	if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) {
+		src = kmap_atomic(page);
+		copy_page(cmem, src);
+		kunmap_atomic(src);
+	} else {
+		memcpy(cmem, src, clen);
+	}
+
+	zs_unmap_object(meta->mem_pool, handle);
+
+	/*
+	 * Free memory associated with this sector
+	 * before overwriting unused sectors.
+	 */
+	zram_free_page(zram, index);
+
+	meta->table[index].handle = handle;
+	meta->table[index].size = clen;
+
+	/* Update stats */
+	atomic64_add(clen, &zram->stats.compr_size);
+	zram->stats.pages_stored++;
+	if (clen <= PAGE_SIZE / 2)
+		zram->stats.good_compress++;
+
+out:
+	if (is_partial_io(bvec))
+		kfree(uncmem);
+
+	if (ret)
+		atomic64_inc(&zram->stats.failed_writes);
+	return ret;
+}
+
+static void handle_pending_slot_free(struct zram *zram)
+{
+	struct zram_slot_free *free_rq;
+
+	spin_lock(&zram->slot_free_lock);
+	while (zram->slot_free_rq) {
+		free_rq = zram->slot_free_rq;
+		zram->slot_free_rq = free_rq->next;
+		zram_free_page(zram, free_rq->index);
+		kfree(free_rq);
+	}
+	spin_unlock(&zram->slot_free_lock);
+}
+
+static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
+			int offset, struct bio *bio, int rw)
+{
+	int ret;
+
+	if (rw == READ) {
+		down_read(&zram->lock);
+		handle_pending_slot_free(zram);
+		ret = zram_bvec_read(zram, bvec, index, offset, bio);
+		up_read(&zram->lock);
+	} else {
+		down_write(&zram->lock);
+		handle_pending_slot_free(zram);
+		ret = zram_bvec_write(zram, bvec, index, offset);
+		up_write(&zram->lock);
+	}
+
+	return ret;
+}
+
+static void zram_reset_device(struct zram *zram, bool reset_capacity)
+{
+	size_t index;
+	struct zram_meta *meta;
+
+	flush_work(&zram->free_work);
+
+	down_write(&zram->init_lock);
+	if (!zram->init_done) {
+		up_write(&zram->init_lock);
+		return;
+	}
+
+	meta = zram->meta;
+	zram->init_done = 0;
+
+	/* Free all pages that are still in this zram device */
+	for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
+		unsigned long handle = meta->table[index].handle;
+		if (!handle)
+			continue;
+
+		zs_free(meta->mem_pool, handle);
+	}
+
+	zram_meta_free(zram->meta);
+	zram->meta = NULL;
+	/* Reset stats */
+	memset(&zram->stats, 0, sizeof(zram->stats));
+
+	zram->disksize = 0;
+	if (reset_capacity)
+		set_capacity(zram->disk, 0);
+	up_write(&zram->init_lock);
+}
+
+static void zram_init_device(struct zram *zram, struct zram_meta *meta)
+{
+	if (zram->disksize > 2 * (totalram_pages << PAGE_SHIFT)) {
+		pr_info(
+		"There is little point creating a zram of greater than "
+		"twice the size of memory since we expect a 2:1 compression "
+		"ratio. Note that zram uses about 0.1%% of the size of "
+		"the disk when not in use so a huge zram is "
+		"wasteful.\n"
+		"\tMemory Size: %lu kB\n"
+		"\tSize you selected: %llu kB\n"
+		"Continuing anyway ...\n",
+		(totalram_pages << PAGE_SHIFT) >> 10, zram->disksize >> 10
+		);
+	}
+
+	/* zram devices sort of resembles non-rotational disks */
+	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, zram->disk->queue);
+
+	zram->meta = meta;
+	zram->init_done = 1;
+
+	pr_debug("Initialization done!\n");
+}
+
+static ssize_t disksize_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	u64 disksize;
+	struct zram_meta *meta;
+	struct zram *zram = dev_to_zram(dev);
+
+	disksize = memparse(buf, NULL);
+	if (!disksize)
+		return -EINVAL;
+
+	disksize = PAGE_ALIGN(disksize);
+	meta = zram_meta_alloc(disksize);
+	down_write(&zram->init_lock);
+	if (zram->init_done) {
+		up_write(&zram->init_lock);
+		zram_meta_free(meta);
+		pr_info("Cannot change disksize for initialized device\n");
+		return -EBUSY;
+	}
+
+	zram->disksize = disksize;
+	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
+	zram_init_device(zram, meta);
+	up_write(&zram->init_lock);
+
+	return len;
+}
+
+static ssize_t reset_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	int ret;
+	unsigned short do_reset;
+	struct zram *zram;
+	struct block_device *bdev;
+
+	zram = dev_to_zram(dev);
+	bdev = bdget_disk(zram->disk, 0);
+
+	if (!bdev)
+		return -ENOMEM;
+
+	/* Do not reset an active device! */
+	if (bdev->bd_holders)
+		return -EBUSY;
+
+	ret = kstrtou16(buf, 10, &do_reset);
+	if (ret)
+		return ret;
+
+	if (!do_reset)
+		return -EINVAL;
+
+	/* Make sure all pending I/O is finished */
+	fsync_bdev(bdev);
+
+	zram_reset_device(zram, true);
+	return len;
+}
+
+static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
+{
+	int i, offset;
+	u32 index;
+	struct bio_vec *bvec;
+
+	switch (rw) {
+	case READ:
+		atomic64_inc(&zram->stats.num_reads);
+		break;
+	case WRITE:
+		atomic64_inc(&zram->stats.num_writes);
+		break;
+	}
+
+	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
+	offset = (bio->bi_sector & (SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;
+
+	bio_for_each_segment(bvec, bio, i) {
+		int max_transfer_size = PAGE_SIZE - offset;
+
+		if (bvec->bv_len > max_transfer_size) {
+			/*
+			 * zram_bvec_rw() can only make operation on a single
+			 * zram page. Split the bio vector.
+			 */
+			struct bio_vec bv;
+
+			bv.bv_page = bvec->bv_page;
+			bv.bv_len = max_transfer_size;
+			bv.bv_offset = bvec->bv_offset;
+
+			if (zram_bvec_rw(zram, &bv, index, offset, bio, rw) < 0)
+				goto out;
+
+			bv.bv_len = bvec->bv_len - max_transfer_size;
+			bv.bv_offset += max_transfer_size;
+			if (zram_bvec_rw(zram, &bv, index+1, 0, bio, rw) < 0)
+				goto out;
+		} else
+			if (zram_bvec_rw(zram, bvec, index, offset, bio, rw)
+			    < 0)
+				goto out;
+
+		update_position(&index, &offset, bvec);
+	}
+
+	set_bit(BIO_UPTODATE, &bio->bi_flags);
+	bio_endio(bio, 0);
+	return;
+
+out:
+	bio_io_error(bio);
+}
+
+/*
+ * Handler function for all zram I/O requests.
+ */
+static void zram_make_request(struct request_queue *queue, struct bio *bio)
+{
+	struct zram *zram = queue->queuedata;
+
+	down_read(&zram->init_lock);
+	if (unlikely(!zram->init_done))
+		goto error;
+
+	if (!valid_io_request(zram, bio)) {
+		atomic64_inc(&zram->stats.invalid_io);
+		goto error;
+	}
+
+	__zram_make_request(zram, bio, bio_data_dir(bio));
+	up_read(&zram->init_lock);
+
+	return;
+
+error:
+	up_read(&zram->init_lock);
+	bio_io_error(bio);
+}
+
+static void zram_slot_free(struct work_struct *work)
+{
+	struct zram *zram;
+
+	zram = container_of(work, struct zram, free_work);
+	down_write(&zram->lock);
+	handle_pending_slot_free(zram);
+	up_write(&zram->lock);
+}
+
+static void add_slot_free(struct zram *zram, struct zram_slot_free *free_rq)
+{
+	spin_lock(&zram->slot_free_lock);
+	free_rq->next = zram->slot_free_rq;
+	zram->slot_free_rq = free_rq;
+	spin_unlock(&zram->slot_free_lock);
+}
+
+static void zram_slot_free_notify(struct block_device *bdev,
+				unsigned long index)
+{
+	struct zram *zram;
+	struct zram_slot_free *free_rq;
+
+	zram = bdev->bd_disk->private_data;
+	atomic64_inc(&zram->stats.notify_free);
+
+	free_rq = kmalloc(sizeof(struct zram_slot_free), GFP_ATOMIC);
+	if (!free_rq)
+		return;
+
+	free_rq->index = index;
+	add_slot_free(zram, free_rq);
+	schedule_work(&zram->free_work);
+}
+
+static const struct block_device_operations zram_devops = {
+	.swap_slot_free_notify = zram_slot_free_notify,
+	.owner = THIS_MODULE
+};
+
+static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
+		disksize_show, disksize_store);
+static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
+static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
+static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
+static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
+static DEVICE_ATTR(notify_free, S_IRUGO, notify_free_show, NULL);
+static DEVICE_ATTR(zero_pages, S_IRUGO, zero_pages_show, NULL);
+static DEVICE_ATTR(orig_data_size, S_IRUGO, orig_data_size_show, NULL);
+static DEVICE_ATTR(compr_data_size, S_IRUGO, compr_data_size_show, NULL);
+static DEVICE_ATTR(mem_used_total, S_IRUGO, mem_used_total_show, NULL);
+
+static struct attribute *zram_disk_attrs[] = {
+	&dev_attr_disksize.attr,
+	&dev_attr_initstate.attr,
+	&dev_attr_reset.attr,
+	&dev_attr_num_reads.attr,
+	&dev_attr_num_writes.attr,
+	&dev_attr_invalid_io.attr,
+	&dev_attr_notify_free.attr,
+	&dev_attr_zero_pages.attr,
+	&dev_attr_orig_data_size.attr,
+	&dev_attr_compr_data_size.attr,
+	&dev_attr_mem_used_total.attr,
+	NULL,
+};
+
+static struct attribute_group zram_disk_attr_group = {
+	.attrs = zram_disk_attrs,
+};
+
+static int create_device(struct zram *zram, int device_id)
+{
+	int ret = -ENOMEM;
+
+	init_rwsem(&zram->lock);
+	init_rwsem(&zram->init_lock);
+
+	INIT_WORK(&zram->free_work, zram_slot_free);
+	spin_lock_init(&zram->slot_free_lock);
+	zram->slot_free_rq = NULL;
+
+	zram->queue = blk_alloc_queue(GFP_KERNEL);
+	if (!zram->queue) {
+		pr_err("Error allocating disk queue for device %d\n",
+			device_id);
+		goto out;
+	}
+
+	blk_queue_make_request(zram->queue, zram_make_request);
+	zram->queue->queuedata = zram;
+
+	 /* gendisk structure */
+	zram->disk = alloc_disk(1);
+	if (!zram->disk) {
+		pr_warn("Error allocating disk structure for device %d\n",
+			device_id);
+		goto out_free_queue;
+	}
+
+	zram->disk->major = zram_major;
+	zram->disk->first_minor = device_id;
+	zram->disk->fops = &zram_devops;
+	zram->disk->queue = zram->queue;
+	zram->disk->private_data = zram;
+	snprintf(zram->disk->disk_name, 16, "zram%d", device_id);
+
+	/* Actual capacity set using syfs (/sys/block/zram<id>/disksize */
+	set_capacity(zram->disk, 0);
+
+	/*
+	 * To ensure that we always get PAGE_SIZE aligned
+	 * and n*PAGE_SIZED sized I/O requests.
+	 */
+	blk_queue_physical_block_size(zram->disk->queue, PAGE_SIZE);
+	blk_queue_logical_block_size(zram->disk->queue,
+					ZRAM_LOGICAL_BLOCK_SIZE);
+	blk_queue_io_min(zram->disk->queue, PAGE_SIZE);
+	blk_queue_io_opt(zram->disk->queue, PAGE_SIZE);
+
+	add_disk(zram->disk);
+
+	ret = sysfs_create_group(&disk_to_dev(zram->disk)->kobj,
+				&zram_disk_attr_group);
+	if (ret < 0) {
+		pr_warn("Error creating sysfs group");
+		goto out_free_disk;
+	}
+
+	zram->init_done = 0;
+	return 0;
+
+out_free_disk:
+	del_gendisk(zram->disk);
+	put_disk(zram->disk);
+out_free_queue:
+	blk_cleanup_queue(zram->queue);
+out:
+	return ret;
+}
+
+static void destroy_device(struct zram *zram)
+{
+	sysfs_remove_group(&disk_to_dev(zram->disk)->kobj,
+			&zram_disk_attr_group);
+
+	del_gendisk(zram->disk);
+	put_disk(zram->disk);
+
+	blk_cleanup_queue(zram->queue);
+}
+
+static int __init zram_init(void)
+{
+	int ret, dev_id;
+
+	if (num_devices > max_num_devices) {
+		pr_warn("Invalid value for num_devices: %u\n",
+				num_devices);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	zram_major = register_blkdev(0, "zram");
+	if (zram_major <= 0) {
+		pr_warn("Unable to get major number\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/* Allocate the device array and initialize each one */
+	zram_devices = kzalloc(num_devices * sizeof(struct zram), GFP_KERNEL);
+	if (!zram_devices) {
+		ret = -ENOMEM;
+		goto unregister;
+	}
+
+	for (dev_id = 0; dev_id < num_devices; dev_id++) {
+		ret = create_device(&zram_devices[dev_id], dev_id);
+		if (ret)
+			goto free_devices;
+	}
+
+	pr_info("Created %u device(s) ...\n", num_devices);
+
+	return 0;
+
+free_devices:
+	while (dev_id)
+		destroy_device(&zram_devices[--dev_id]);
+	kfree(zram_devices);
+unregister:
+	unregister_blkdev(zram_major, "zram");
+out:
+	return ret;
+}
+
+static void __exit zram_exit(void)
+{
+	int i;
+	struct zram *zram;
+
+	for (i = 0; i < num_devices; i++) {
+		zram = &zram_devices[i];
+
+		destroy_device(zram);
+		/*
+		 * Shouldn't access zram->disk after destroy_device
+		 * because destroy_device already released zram->disk.
+		 */
+		zram_reset_device(zram, false);
+	}
+
+	unregister_blkdev(zram_major, "zram");
+
+	kfree(zram_devices);
+	pr_debug("Cleanup done!\n");
+}
+
+module_init(zram_init);
+module_exit(zram_exit);
+
+module_param(num_devices, uint, 0);
+MODULE_PARM_DESC(num_devices, "Number of zram devices");
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Nitin Gupta <[email protected]>");
+MODULE_DESCRIPTION("Compressed RAM Block Device");
drivers/staging/Kconfig +0 -2
index dd837635829c..e30adf86623d 100644
@@ -74,8 +74,6 @@ source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
 
-source "drivers/staging/zram/Kconfig"
-
 source "drivers/staging/wlags49_h2/Kconfig"
 
 source "drivers/staging/wlags49_h25/Kconfig"
drivers/staging/Makefile +0 -1
index c918dc4e9129..9281bf5ddc2b 100644
@@ -31,7 +31,6 @@ obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_DX_SEP)            += sep/
 obj-$(CONFIG_IIO)		+= iio/
-obj-$(CONFIG_ZRAM)		+= zram/
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
 obj-$(CONFIG_WLAGS49_H25)	+= wlags49_h25/
 obj-$(CONFIG_FB_SM7XX)		+= sm7xxfb/
drivers/staging/zram/Kconfig deleted +0 -25
deleted file mode 100644
index 983314c41349..000000000000
@@ -1,25 +0,0 @@
-config ZRAM
-	tristate "Compressed RAM block device support"
-	depends on BLOCK && SYSFS && ZSMALLOC
-	select LZO_COMPRESS
-	select LZO_DECOMPRESS
-	default n
-	help
-	  Creates virtual block devices called /dev/zramX (X = 0, 1, ...).
-	  Pages written to these disks are compressed and stored in memory
-	  itself. These disks allow very fast I/O and compression provides
-	  good amounts of memory savings.
-
-	  It has several use cases, for example: /tmp storage, use as swap
-	  disks and maybe many more.
-
-	  See zram.txt for more information.
-	  Project home: <https://compcache.googlecode.com/>
-
-config ZRAM_DEBUG
-	bool "Compressed RAM block device debug support"
-	depends on ZRAM
-	default n
-	help
-	  This option adds additional debugging code to the compressed
-	  RAM block device driver.
drivers/staging/zram/Makefile deleted +0 -3
deleted file mode 100644
index cb0f9ced6a93..000000000000
@@ -1,3 +0,0 @@
-zram-y	:=	zram_drv.o
-
-obj-$(CONFIG_ZRAM)	+=	zram.o
drivers/staging/zram/zram.txt deleted +0 -77
deleted file mode 100644
index 765d790ae831..000000000000
@@ -1,77 +0,0 @@
-zram: Compressed RAM based block devices
-----------------------------------------
-
-Project home: http://compcache.googlecode.com/
-
-* Introduction
-
-The zram module creates RAM based block devices named /dev/zram<id>
-(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
-in memory itself. These disks allow very fast I/O and compression provides
-good amounts of memory savings. Some of the usecases include /tmp storage,
-use as swap disks, various caches under /var and maybe many more :)
-
-Statistics for individual zram devices are exported through sysfs nodes at
-/sys/block/zram<id>/
-
-* Usage
-
-Following shows a typical sequence of steps for using zram.
-
-1) Load Module:
-	modprobe zram num_devices=4
-	This creates 4 devices: /dev/zram{0,1,2,3}
-	(num_devices parameter is optional. Default: 1)
-
-2) Set Disksize
-        Set disk size by writing the value to sysfs node 'disksize'.
-        The value can be either in bytes or you can use mem suffixes.
-        Examples:
-            # Initialize /dev/zram0 with 50MB disksize
-            echo $((50*1024*1024)) > /sys/block/zram0/disksize
-
-            # Using mem suffixes
-            echo 256K > /sys/block/zram0/disksize
-            echo 512M > /sys/block/zram0/disksize
-            echo 1G > /sys/block/zram0/disksize
-
-3) Activate:
-	mkswap /dev/zram0
-	swapon /dev/zram0
-
-	mkfs.ext4 /dev/zram1
-	mount /dev/zram1 /tmp
-
-4) Stats:
-	Per-device statistics are exported as various nodes under
-	/sys/block/zram<id>/
-		disksize
-		num_reads
-		num_writes
-		invalid_io
-		notify_free
-		discard
-		zero_pages
-		orig_data_size
-		compr_data_size
-		mem_used_total
-
-5) Deactivate:
-	swapoff /dev/zram0
-	umount /dev/zram1
-
-6) Reset:
-	Write any positive value to 'reset' sysfs node
-	echo 1 > /sys/block/zram0/reset
-	echo 1 > /sys/block/zram1/reset
-
-	This frees all the memory allocated for the given device and
-	resets the disksize to zero. You must set the disksize again
-	before reusing the device.
-
-Please report any problems at:
- - Mailing list: linux-mm-cc at laptop dot org
- - Issue tracker: http://code.google.com/p/compcache/issues/list
-
-Nitin Gupta
[email protected]
drivers/staging/zram/zram_drv.c deleted +0 -754
deleted file mode 100644
index 79ce363b2ea9..000000000000
@@ -1,982 +0,0 @@
-/*
- * Compressed RAM block device
- *
- * Copyright (C) 2008, 2009, 2010  Nitin Gupta
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- * Project home: http://compcache.googlecode.com
- */
-
-#define KMSG_COMPONENT "zram"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#ifdef CONFIG_ZRAM_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/bio.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
-#include <linux/device.h>
-#include <linux/genhd.h>
-#include <linux/highmem.h>
-#include <linux/slab.h>
-#include <linux/lzo.h>
-#include <linux/string.h>
-#include <linux/vmalloc.h>
-
-#include "zram_drv.h"
-
-/* Globals */
-static int zram_major;
-static struct zram *zram_devices;
-
-/* Module params (documentation at end) */
-static unsigned int num_devices = 1;
-
-static inline struct zram *dev_to_zram(struct device *dev)
-{
-	return (struct zram *)dev_to_disk(dev)->private_data;
-}
-
-static ssize_t disksize_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n", zram->disksize);
-}
-
-static ssize_t initstate_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%u\n", zram->init_done);
-}
-
-static ssize_t num_reads_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.num_reads));
-}
-
-static ssize_t num_writes_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.num_writes));
-}
-
-static ssize_t invalid_io_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.invalid_io));
-}
-
-static ssize_t notify_free_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.notify_free));
-}
-
-static ssize_t zero_pages_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%u\n", zram->stats.pages_zero);
-}
-
-static ssize_t orig_data_size_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n",
-		(u64)(zram->stats.pages_stored) << PAGE_SHIFT);
-}
-
-static ssize_t compr_data_size_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
-
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.compr_size));
-}
-
-static ssize_t mem_used_total_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	u64 val = 0;
-	struct zram *zram = dev_to_zram(dev);
-	struct zram_meta *meta = zram->meta;
-
-	down_read(&zram->init_lock);
-	if (zram->init_done)
-		val = zs_get_total_size_bytes(meta->mem_pool);
-	up_read(&zram->init_lock);
-
-	return sprintf(buf, "%llu\n", val);
-}
-
-static int zram_test_flag(struct zram_meta *meta, u32 index,
-			enum zram_pageflags flag)
-{
-	return meta->table[index].flags & BIT(flag);
-}
-
-static void zram_set_flag(struct zram_meta *meta, u32 index,
-			enum zram_pageflags flag)
-{
-	meta->table[index].flags |= BIT(flag);
-}
-
-static void zram_clear_flag(struct zram_meta *meta, u32 index,
-			enum zram_pageflags flag)
-{
-	meta->table[index].flags &= ~BIT(flag);
-}
-
-static inline int is_partial_io(struct bio_vec *bvec)
-{
-	return bvec->bv_len != PAGE_SIZE;
-}
-
-/*
- * Check if request is within bounds and aligned on zram logical blocks.
- */
-static inline int valid_io_request(struct zram *zram, struct bio *bio)
-{
-	u64 start, end, bound;
-
-	/* unaligned request */
-	if (unlikely(bio->bi_sector & (ZRAM_SECTOR_PER_LOGICAL_BLOCK - 1)))
-		return 0;
-	if (unlikely(bio->bi_size & (ZRAM_LOGICAL_BLOCK_SIZE - 1)))
-		return 0;
-
-	start = bio->bi_sector;
-	end = start + (bio->bi_size >> SECTOR_SHIFT);
-	bound = zram->disksize >> SECTOR_SHIFT;
-	/* out of range range */
-	if (unlikely(start >= bound || end > bound || start > end))
-		return 0;
-
-	/* I/O request is valid */
-	return 1;
-}
-
-static void zram_meta_free(struct zram_meta *meta)
-{
-	zs_destroy_pool(meta->mem_pool);
-	kfree(meta->compress_workmem);
-	free_pages((unsigned long)meta->compress_buffer, 1);
-	vfree(meta->table);
-	kfree(meta);
-}
-
-static struct zram_meta *zram_meta_alloc(u64 disksize)
-{
-	size_t num_pages;
-	struct zram_meta *meta = kmalloc(sizeof(*meta), GFP_KERNEL);
-	if (!meta)
-		goto out;
-
-	meta->compress_workmem = kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
-	if (!meta->compress_workmem)
-		goto free_meta;
-
-	meta->compress_buffer =
-		(void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
-	if (!meta->compress_buffer) {
-		pr_err("Error allocating compressor buffer space\n");
-		goto free_workmem;
-	}
-
-	num_pages = disksize >> PAGE_SHIFT;
-	meta->table = vzalloc(num_pages * sizeof(*meta->table));
-	if (!meta->table) {
-		pr_err("Error allocating zram address table\n");
-		goto free_buffer;
-	}
-
-	meta->mem_pool = zs_create_pool(GFP_NOIO | __GFP_HIGHMEM);
-	if (!meta->mem_pool) {
-		pr_err("Error creating memory pool\n");
-		goto free_table;
-	}
-
-	return meta;
-
-free_table:
-	vfree(meta->table);
-free_buffer:
-	free_pages((unsigned long)meta->compress_buffer, 1);
-free_workmem:
-	kfree(meta->compress_workmem);
-free_meta:
-	kfree(meta);
-	meta = NULL;
-out:
-	return meta;
-}
-
-static void update_position(u32 *index, int *offset, struct bio_vec *bvec)
-{
-	if (*offset + bvec->bv_len >= PAGE_SIZE)
-		(*index)++;
-	*offset = (*offset + bvec->bv_len) % PAGE_SIZE;
-}
-
-static int page_zero_filled(void *ptr)
-{
-	unsigned int pos;
-	unsigned long *page;
-
-	page = (unsigned long *)ptr;
-
-	for (pos = 0; pos != PAGE_SIZE / sizeof(*page); pos++) {
-		if (page[pos])
-			return 0;
-	}
-
-	return 1;
-}
-
-static void handle_zero_page(struct bio_vec *bvec)
-{
-	struct page *page = bvec->bv_page;
-	void *user_mem;
-
-	user_mem = kmap_atomic(page);
-	if (is_partial_io(bvec))
-		memset(user_mem + bvec->bv_offset, 0, bvec->bv_len);
-	else
-		clear_page(user_mem);
-	kunmap_atomic(user_mem);
-
-	flush_dcache_page(page);
-}
-
-static void zram_free_page(struct zram *zram, size_t index)
-{
-	struct zram_meta *meta = zram->meta;
-	unsigned long handle = meta->table[index].handle;
-	u16 size = meta->table[index].size;
-
-	if (unlikely(!handle)) {
-		/*
-		 * No memory is allocated for zero filled pages.
-		 * Simply clear zero page flag.
-		 */
-		if (zram_test_flag(meta, index, ZRAM_ZERO)) {
-			zram_clear_flag(meta, index, ZRAM_ZERO);
-			zram->stats.pages_zero--;
-		}
-		return;
-	}
-
-	if (unlikely(size > max_zpage_size))
-		zram->stats.bad_compress--;
-
-	zs_free(meta->mem_pool, handle);
-
-	if (size <= PAGE_SIZE / 2)
-		zram->stats.good_compress--;
-
-	atomic64_sub(meta->table[index].size, &zram->stats.compr_size);
-	zram->stats.pages_stored--;
-
-	meta->table[index].handle = 0;
-	meta->table[index].size = 0;
-}
-
-static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
-{
-	int ret = LZO_E_OK;
-	size_t clen = PAGE_SIZE;
-	unsigned char *cmem;
-	struct zram_meta *meta = zram->meta;
-	unsigned long handle = meta->table[index].handle;
-
-	if (!handle || zram_test_flag(meta, index, ZRAM_ZERO)) {
-		clear_page(mem);
-		return 0;
-	}
-
-	cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_RO);
-	if (meta->table[index].size == PAGE_SIZE)
-		copy_page(mem, cmem);
-	else
-		ret = lzo1x_decompress_safe(cmem, meta->table[index].size,
-						mem, &clen);
-	zs_unmap_object(meta->mem_pool, handle);
-
-	/* Should NEVER happen. Return bio error if it does. */
-	if (unlikely(ret != LZO_E_OK)) {
-		pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
-		atomic64_inc(&zram->stats.failed_reads);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
-			  u32 index, int offset, struct bio *bio)
-{
-	int ret;
-	struct page *page;
-	unsigned char *user_mem, *uncmem = NULL;
-	struct zram_meta *meta = zram->meta;
-	page = bvec->bv_page;
-
-	if (unlikely(!meta->table[index].handle) ||
-			zram_test_flag(meta, index, ZRAM_ZERO)) {
-		handle_zero_page(bvec);
-		return 0;
-	}
-
-	if (is_partial_io(bvec))
-		/* Use  a temporary buffer to decompress the page */
-		uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
-
-	user_mem = kmap_atomic(page);
-	if (!is_partial_io(bvec))
-		uncmem = user_mem;
-
-	if (!uncmem) {
-		pr_info("Unable to allocate temp memory\n");
-		ret = -ENOMEM;
-		goto out_cleanup;
-	}
-
-	ret = zram_decompress_page(zram, uncmem, index);
-	/* Should NEVER happen. Return bio error if it does. */
-	if (unlikely(ret != LZO_E_OK))
-		goto out_cleanup;
-
-	if (is_partial_io(bvec))
-		memcpy(user_mem + bvec->bv_offset, uncmem + offset,
-				bvec->bv_len);
-
-	flush_dcache_page(page);
-	ret = 0;
-out_cleanup:
-	kunmap_atomic(user_mem);
-	if (is_partial_io(bvec))
-		kfree(uncmem);
-	return ret;
-}
-
-static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
-			   int offset)
-{
-	int ret = 0;
-	size_t clen;
-	unsigned long handle;
-	struct page *page;
-	unsigned char *user_mem, *cmem, *src, *uncmem = NULL;
-	struct zram_meta *meta = zram->meta;
-
-	page = bvec->bv_page;
-	src = meta->compress_buffer;
-
-	if (is_partial_io(bvec)) {
-		/*
-		 * This is a partial IO. We need to read the full page
-		 * before to write the changes.
-		 */
-		uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
-		if (!uncmem) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		ret = zram_decompress_page(zram, uncmem, index);
-		if (ret)
-			goto out;
-	}
-
-	user_mem = kmap_atomic(page);
-
-	if (is_partial_io(bvec)) {
-		memcpy(uncmem + offset, user_mem + bvec->bv_offset,
-		       bvec->bv_len);
-		kunmap_atomic(user_mem);
-		user_mem = NULL;
-	} else {
-		uncmem = user_mem;
-	}
-
-	if (page_zero_filled(uncmem)) {
-		kunmap_atomic(user_mem);
-		/* Free memory associated with this sector now. */
-		zram_free_page(zram, index);
-
-		zram->stats.pages_zero++;
-		zram_set_flag(meta, index, ZRAM_ZERO);
-		ret = 0;
-		goto out;
-	}
-
-	/*
-	 * zram_slot_free_notify could miss free so that let's
-	 * double check.
-	 */
-	if (unlikely(meta->table[index].handle ||
-			zram_test_flag(meta, index, ZRAM_ZERO)))
-		zram_free_page(zram, index);
-
-	ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen,
-			       meta->compress_workmem);
-
-	if (!is_partial_io(bvec)) {
-		kunmap_atomic(user_mem);
-		user_mem = NULL;
-		uncmem = NULL;
-	}
-
-	if (unlikely(ret != LZO_E_OK)) {
-		pr_err("Compression failed! err=%d\n", ret);
-		goto out;
-	}
-
-	if (unlikely(clen > max_zpage_size)) {
-		zram->stats.bad_compress++;
-		clen = PAGE_SIZE;
-		src = NULL;
-		if (is_partial_io(bvec))
-			src = uncmem;
-	}
-
-	handle = zs_malloc(meta->mem_pool, clen);
-	if (!handle) {
-		pr_info("Error allocating memory for compressed page: %u, size=%zu\n",
-			index, clen);
-		ret = -ENOMEM;
-		goto out;
-	}
-	cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_WO);
-
-	if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) {
-		src = kmap_atomic(page);
-		copy_page(cmem, src);
-		kunmap_atomic(src);
-	} else {
-		memcpy(cmem, src, clen);
-	}
-
-	zs_unmap_object(meta->mem_pool, handle);
-
-	/*
-	 * Free memory associated with this sector
-	 * before overwriting unused sectors.
-	 */
-	zram_free_page(zram, index);
-
-	meta->table[index].handle = handle;
-	meta->table[index].size = clen;
-
-	/* Update stats */
-	atomic64_add(clen, &zram->stats.compr_size);
-	zram->stats.pages_stored++;
-	if (clen <= PAGE_SIZE / 2)
-		zram->stats.good_compress++;
-
-out:
-	if (is_partial_io(bvec))
-		kfree(uncmem);
-
-	if (ret)
-		atomic64_inc(&zram->stats.failed_writes);
-	return ret;
-}
-
-static void handle_pending_slot_free(struct zram *zram)
-{
-	struct zram_slot_free *free_rq;
-
-	spin_lock(&zram->slot_free_lock);
-	while (zram->slot_free_rq) {
-		free_rq = zram->slot_free_rq;
-		zram->slot_free_rq = free_rq->next;
-		zram_free_page(zram, free_rq->index);
-		kfree(free_rq);
-	}
-	spin_unlock(&zram->slot_free_lock);
-}
-
-static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
-			int offset, struct bio *bio, int rw)
-{
-	int ret;
-
-	if (rw == READ) {
-		down_read(&zram->lock);
-		handle_pending_slot_free(zram);
-		ret = zram_bvec_read(zram, bvec, index, offset, bio);
-		up_read(&zram->lock);
-	} else {
-		down_write(&zram->lock);
-		handle_pending_slot_free(zram);
-		ret = zram_bvec_write(zram, bvec, index, offset);
-		up_write(&zram->lock);
-	}
-
-	return ret;
-}
-
-static void zram_reset_device(struct zram *zram, bool reset_capacity)
-{
-	size_t index;
-	struct zram_meta *meta;
-
-	flush_work(&zram->free_work);
-
-	down_write(&zram->init_lock);
-	if (!zram->init_done) {
-		up_write(&zram->init_lock);
-		return;
-	}
-
-	meta = zram->meta;
-	zram->init_done = 0;
-
-	/* Free all pages that are still in this zram device */
-	for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
-		unsigned long handle = meta->table[index].handle;
-		if (!handle)
-			continue;
-
-		zs_free(meta->mem_pool, handle);
-	}
-
-	zram_meta_free(zram->meta);
-	zram->meta = NULL;
-	/* Reset stats */
-	memset(&zram->stats, 0, sizeof(zram->stats));
-
-	zram->disksize = 0;
-	if (reset_capacity)
-		set_capacity(zram->disk, 0);
-	up_write(&zram->init_lock);
-}
-
-static void zram_init_device(struct zram *zram, struct zram_meta *meta)
-{
-	if (zram->disksize > 2 * (totalram_pages << PAGE_SHIFT)) {
-		pr_info(
-		"There is little point creating a zram of greater than "
-		"twice the size of memory since we expect a 2:1 compression "
-		"ratio. Note that zram uses about 0.1%% of the size of "
-		"the disk when not in use so a huge zram is "
-		"wasteful.\n"
-		"\tMemory Size: %lu kB\n"
-		"\tSize you selected: %llu kB\n"
-		"Continuing anyway ...\n",
-		(totalram_pages << PAGE_SHIFT) >> 10, zram->disksize >> 10
-		);
-	}
-
-	/* zram devices sort of resembles non-rotational disks */
-	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, zram->disk->queue);
-
-	zram->meta = meta;
-	zram->init_done = 1;
-
-	pr_debug("Initialization done!\n");
-}
-
-static ssize_t disksize_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t len)
-{
-	u64 disksize;
-	struct zram_meta *meta;
-	struct zram *zram = dev_to_zram(dev);
-
-	disksize = memparse(buf, NULL);
-	if (!disksize)
-		return -EINVAL;
-
-	disksize = PAGE_ALIGN(disksize);
-	meta = zram_meta_alloc(disksize);
-	down_write(&zram->init_lock);
-	if (zram->init_done) {
-		up_write(&zram->init_lock);
-		zram_meta_free(meta);
-		pr_info("Cannot change disksize for initialized device\n");
-		return -EBUSY;
-	}
-
-	zram->disksize = disksize;
-	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
-	zram_init_device(zram, meta);
-	up_write(&zram->init_lock);
-
-	return len;
-}
-
-static ssize_t reset_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t len)
-{
-	int ret;
-	unsigned short do_reset;
-	struct zram *zram;
-	struct block_device *bdev;
-
-	zram = dev_to_zram(dev);
-	bdev = bdget_disk(zram->disk, 0);
-
-	if (!bdev)
-		return -ENOMEM;
-
-	/* Do not reset an active device! */
-	if (bdev->bd_holders)
-		return -EBUSY;
-
-	ret = kstrtou16(buf, 10, &do_reset);
-	if (ret)
-		return ret;
-
-	if (!do_reset)
-		return -EINVAL;
-
-	/* Make sure all pending I/O is finished */
-	fsync_bdev(bdev);
-
-	zram_reset_device(zram, true);
-	return len;
-}
-
-static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
-{
-	int i, offset;
-	u32 index;
-	struct bio_vec *bvec;
-
-	switch (rw) {
-	case READ:
-		atomic64_inc(&zram->stats.num_reads);
-		break;
-	case WRITE:
-		atomic64_inc(&zram->stats.num_writes);
-		break;
-	}
-
-	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
-	offset = (bio->bi_sector & (SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;
-
-	bio_for_each_segment(bvec, bio, i) {
-		int max_transfer_size = PAGE_SIZE - offset;
-
-		if (bvec->bv_len > max_transfer_size) {
-			/*
-			 * zram_bvec_rw() can only make operation on a single
-			 * zram page. Split the bio vector.
-			 */
-			struct bio_vec bv;
-
-			bv.bv_page = bvec->bv_page;
-			bv.bv_len = max_transfer_size;
-			bv.bv_offset = bvec->bv_offset;
-
-			if (zram_bvec_rw(zram, &bv, index, offset, bio, rw) < 0)
-				goto out;
-
-			bv.bv_len = bvec->bv_len - max_transfer_size;
-			bv.bv_offset += max_transfer_size;
-			if (zram_bvec_rw(zram, &bv, index+1, 0, bio, rw) < 0)
-				goto out;
-		} else
-			if (zram_bvec_rw(zram, bvec, index, offset, bio, rw)
-			    < 0)
-				goto out;
-
-		update_position(&index, &offset, bvec);
-	}
-
-	set_bit(BIO_UPTODATE, &bio->bi_flags);
-	bio_endio(bio, 0);
-	return;
-
-out:
-	bio_io_error(bio);
-}
-
-/*
- * Handler function for all zram I/O requests.
- */
-static void zram_make_request(struct request_queue *queue, struct bio *bio)
-{
-	struct zram *zram = queue->queuedata;
-
-	down_read(&zram->init_lock);
-	if (unlikely(!zram->init_done))
-		goto error;
-
-	if (!valid_io_request(zram, bio)) {
-		atomic64_inc(&zram->stats.invalid_io);
-		goto error;
-	}
-
-	__zram_make_request(zram, bio, bio_data_dir(bio));
-	up_read(&zram->init_lock);
-
-	return;
-
-error:
-	up_read(&zram->init_lock);
-	bio_io_error(bio);
-}
-
-static void zram_slot_free(struct work_struct *work)
 
--
Quoted 5 lines

To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

author maintainer
#6 lore raw

Re: [PATCH v8 4/4] zram: promote zram from staging

Hello Jerome,

Quoted 57 lines · Jerome Marchand
Quoted 49 lines · Minchan Kim

Zram has lived in staging for a LONG LONG time and have been fixed/improved by many contributors so code is clean and stable now. Of course, there are lots of product using zram in real practice.

The major TV companys have used zram as swap since two years ago and recently our production team released android smart phone with zram which is used as swap, too and recently Android Kitkat start to use zram for small memory smart phone. And there was a report Google released their ChromeOS with zram, too and cyanogenmod have been used zram long time ago. And I heard some disto have used zram block device for tmpfs. In addition, I saw many report from many other peoples. For example, Lubuntu start to use it.

The benefit of zram is very clear. With my experience, one of the benefit was to remove jitter of video application with backgroud memory pressure. It would be effect of efficient memory usage by compression but more issue is whether swap is there or not in the system. Recent mobile platforms have used JAVA so there are many anonymous pages. But embedded system normally are reluctant to use eMMC or SDCard as swap because there is wear-leveling and latency issues so if we do not use swap, it means we can't reclaim anoymous pages and at last, we could encounter OOM kill. :(

Although we have real storage as swap, it was a problem, too. Because it sometime ends up making system very unresponsible caused by slow swap storage performance.

Quote from Luigi on Google
"
Since Chrome OS was mentioned: the main reason why we don't use swap to a disk (rotating or SSD) is because it doesn't degrade gracefully and leads to a bad interactive experience. Generally we prefer to manage RAM at a higher level, by transparently killing and restarting processes. But we noticed that zram is fast enough to be competitive with the latter, and it lets us make more efficient use of the available RAM.
"
and he announced. http://www.spinics.net/lists/linux-mm/msg57717.html

Other uses case is to use zram for block device. Zram is block device so anyone can format the block device and mount on it so some guys on the internet start zram as /var/tmp.
http://forums.gentoo.org/viewtopic-t-838198-start-0.html

Let's promote zram and enhance/maintain it instead of removing.

Quoted 6 lines
---
 drivers/block/Kconfig           |    2 +
 drivers/block/Makefile          |    2 +
 drivers/block/zram/Kconfig      |   25 +
 drivers/block/zram/Makefile     |    3 +
 drivers/block/zram/zram.txt     |   77 +++
Quoted 2 lines

Shouldn't that go in Documentation/ directory?
In Documentation/blockdev/ maybe.

Sure. I will wait more to get a review from others and I will update it in next spin.

Thanks.

Signature · 8 lines
Kind regards,
Minchan Kim

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>