ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
Subsystems (2)
PATCH 1/2 ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/boot/dts/imx51-babbage.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx51-babbage.dts +1 -1
@@ -138,7 +138,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, - <&gpio4 25 GPIO_ACTIVE_HIGH>; + <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; pmic: mc13892 at 0 {
Signature · 1 line
1.8.3.2
PATCH 2/2 ARM: dts: imx51-babbage: Define FEC reset pin
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/boot/dts/imx51-babbage.dts | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm/boot/dts/imx51-babbage.dts +6 -1
@@ -299,7 +299,10 @@ }; pinctrl_fec: fecgrp { - fsl,pins = <MX51_FEC_PINGRP1>; + fsl,pins = < + MX51_FEC_PINGRP1 + MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ + >; }; pinctrl_i2c2: i2c2grp {
@@ -377,6 +380,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; status = "okay"; };
Signature · 1 line
1.8.3.2
Shawn Guo
AppliedPATCH 1/2 ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
In reply to Alexander ShiyanQuoted 1 line · Alexander Shiyan
Signed-off-by Alexander Shiyan <[email protected]>
Applied both, thanks.
Shawn
Quoted 20 lines
--- arch/arm/boot/dts/imx51-babbage.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/imx51-babbage.dts +1
-1@@ -138,7 +138,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, - <&gpio4 25 GPIO_ACTIVE_HIGH>; + <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; pmic: mc13892 at 0 {Signature · 1 line
1.8.3.2