How to write jffs2 image to spi nor flash?
Hi list,
I use "sf erase" + "sf write" commands to write root image to spi nor flash. It works for writing a ext2 image.
However, if I use the same commands to write a jffs2 image I got a lot of "Magic bitmask 0x1985 not found at..." messages and
"jffs2: inflate returned -3".
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f780: 0x4bbb instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f784: 0x50f2 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f788: 0x4230 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f78c: 0x76ac instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f790: 0x439c instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f794: 0xd9b9 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f798: 0x73d3 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f79c: 0x5758 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f7a0: 0x1b47 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012f7a4: 0xf908 instead
jffs2: Further such events for this erase block will not be printed
So how to correctly write a jffs2 image to spi nor flash in u-boot?
Thanks,
Axel
2013/11/28 Axel Lin <[email protected]>:
Quoted 20 lines
Hi list,
I use "sf erase" + "sf write" commands to write root image to spi nor flash. It works for writing a ext2 image.
However, if I use the same commands to write a jffs2 image I got a lot of "Magic bitmask0x1985not found at..." messages and
"jffs2: inflate returned -3".jffs2:
jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f780:0x4bbbinstead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f784:0x50f2instead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f788:0x4230instead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f78c:0x76acinstead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f790:0x439cinstead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f794:0xd9b9instead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f798:0x73d3instead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f79c:0x5758instead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f7a0:0x1b47instead
jffs2:jffs2_scan_eraseblock(): Magic bitmask0x1985not found at0x0012f7a4:0xf908instead
jffs2: Further such events for this erase block will not be printed
Quoted 1 line
So how to correctly write a jffs2 image to spi nor flash in u-boot?
It's my fault.
Fix it by adding --pad=SIZE to mkfs.jffs2.
Regards,
Axel