ASoC: adsp: Use async writes where possible
Subsystems (3)
Mark Brown
maintainerPATCH 1/1 ASoC: adsp: Use async writes where possible
From: Mark Brown <[email protected]>
This will allow a marginal speed improvement when used with a bus that supports async I/O by reducing the amount of context thrashing between writes, allowing the bus to be more fully utilised.
Signed-off-by Mark Brown <[email protected]>
--- sound/soc/codecs/wm_adsp.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
sound/soc/codecs/wm_adsp.c +9 -9
@@ -1468,8 +1468,8 @@ static int wm_adsp2_ena(struct wm_adsp *dsp)unsigned int val;int ret, count; - ret =regmap_update_bits (dsp->regmap, dsp->base +ADSP2_CONTROL , -ADSP2_SYS_ENA ,ADSP2_SYS_ENA ); + ret =regmap_update_bits_async (dsp->regmap, dsp->base +ADSP2_CONTROL , +ADSP2_SYS_ENA ,ADSP2_SYS_ENA );if (ret !=0 )return ret;
@@ -1521,9 +1521,9 @@ int wm_adsp2_event(struct snd_soc_dapm_widget *w, val = (val &ARIZONA_SYSCLK_FREQ_MASK ) >>ARIZONA_SYSCLK_FREQ_SHIFT ; - ret =regmap_update_bits (dsp->regmap, - dsp->base +ADSP2_CLOCKING , -ADSP2_CLK_SEL_MASK , val); + ret =regmap_update_bits_async (dsp->regmap, + dsp->base +ADSP2_CLOCKING , +ADSP2_CLK_SEL_MASK , val);if (ret !=0 ) {adsp_err (dsp,"Failed to set clock rate: %d\n" , ret);
@@ -1586,10 +1586,10 @@ int wm_adsp2_event(struct snd_soc_dapm_widget *w,if (ret !=0 ) goto err; - ret =regmap_update_bits (dsp->regmap, - dsp->base +ADSP2_CONTROL , -ADSP2_CORE_ENA |ADSP2_START , -ADSP2_CORE_ENA |ADSP2_START ); + ret =regmap_update_bits_async (dsp->regmap, + dsp->base +ADSP2_CONTROL , +ADSP2_CORE_ENA |ADSP2_START , +ADSP2_CORE_ENA |ADSP2_START );if (ret !=0 ) goto err;
Signature · 1 line
1.8.4.4