dwmmc: make driver usable for non-exynos platforms
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
There's no point in having of "dwmmc.h" per architecure - we're talking about device driver (DesignWare MMC controller) which is expected to work with any CPU it is attached to.
Actually this change should have been an essential part of commit:
=======6f0b7caa671f92c2d4676c84381d17fb90f7d2cd
DWMMC: SMDK5420: Disable SMU for eMMC
=======
Or even better I'd prefer all non pure DW MMC functionality (those item in ifdefs) to be moved to corresponding files like "exynos_dw_mmc.c" via call-backs etc. This will keep DW MMC driver clean and simple.
As it is said in http://www.denx.de/wiki/U-Boot/DesignPrinciples:
=======
8. Keep it Maintainable
Avoid #ifdefs where possible
=======
Changes compared to initial version:
Instead of modification of headers only disable some parts of code with ifdefs.
--- drivers/mmc/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/mmc/dw_mmc.c +4 -0
@@ -11,7 +11,9 @@#include <mmc.h> #include <dwmmc.h> #include <asm-generic/errno.h> +#ifdef CONFIG_EXYNOS5420 #include <asm/arch/dwmmc.h> +#endif #define PAGE_SIZE 4096
@@ -302,6 +304,7 @@ static int dwmci_init(struct mmc *mmc)struct dwmci_host *host = (struct dwmci_host *)mmc->priv;u32 fifo_size; +#ifdef CONFIG_EXYNOS5420 if (host->quirks &DWMCI_QUIRK_DISABLE_SMU ) {dwmci_writel (host,EMMCP_MPSBEGIN0 ,0 );dwmci_writel (host,EMMCP_SEND0 ,0 );
@@ -311,6 +314,7 @@ static int dwmci_init(struct mmc *mmc)MPSCTRL_NON_SECURE_READ_BIT | MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID); } +#endif dwmci_writel (host,DWMCI_PWREN ,1 );
Signature · 1 line
1.8.4.2
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Hi Alexey,
I have replied the previous patch.
Quoted 42 lines · Alexey Brodkin
There's no point in having of "
dwmmc.h" per architecure - we're talking about device driver (DesignWare MMC controller) which is expected to work with any CPU it is attached to.Actually this change should have been an essential part of commit:
=======6f0b7caa671f92c2d4676c84381d17fb90f7d2cd
DWMMC: SMDK5420: Disable SMU for eMMC
=======Or even better I'd prefer all non pure DW MMC functionality (those item in ifdefs) to be moved to corresponding files like "
exynos_dw_mmc.c" via call-backs etc. This will keep DW MMC driver clean and simple.As it is said in http://www.denx.de/wiki/U-Boot/DesignPrinciples:
=======
8. Keep it Maintainable
Avoid #ifdefs where possible
=======Signed-off-by Alexey Brodkin <[email protected]>Cc Mischa Jonker <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Andy Fleming <[email protected]>Cc Alim Akhtar <[email protected]>Cc Rajeshwari Shinde <[email protected]>Cc Simon Glass <[email protected]>Cc Pantelis Antoniou <[email protected]>Changes compared to initial version:
Instead of modification of headers only disable some parts of code with ifdefs.--- drivers/mmc/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/mmc/dw_mmc.c +0
-0
drivers/mmc/dw_mmc.c line 16
Quoted 6 lines
drivers/mmc/dw_mmc.c +2
-0@@ -11,7 +11,9 @@#include <mmc.h> #include <dwmmc.h> #include <asm-generic/errno.h> +#ifdef CONFIG_EXYNOS5420 #include <asm/arch/dwmmc.h> +#endif
Just remove this.
Quoted 12 lines
drivers/mmc/dw_mmc.c +1
-0#define PAGE_SIZE 4096@@ -302,6 +304,7 @@ static int dwmci_init(struct mmc *mmc)struct dwmci_host *host = (struct dwmci_host *)mmc->priv;u32 fifo_size; +#ifdef CONFIG_EXYNOS5420 if (host->quirks &DWMCI_QUIRK_DISABLE_SMU ) {dwmci_writel (host,EMMCP_MPSBEGIN0 ,0 );dwmci_writel (host,EMMCP_SEND0 ,0 );
drivers/mmc/dw_mmc.c static int dwmci_init(struct mmc *mmc) · line 317
Quoted 4 lines
drivers/mmc/dw_mmc.c +1
-0@@ -311,6 +314,7 @@ static int dwmci_init(struct mmc *mmc)MPSCTRL_NON_SECURE_READ_BIT | MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID); } +#endif
remove this and use callback function like the host->board_init()? if (host->board_init())
host->board_init(host);
Then we can reuse the this function for board specific code. Anyway, I think that exynos code didn't exist at here(dw-mmc.c).
Best Regards,
Jaehoon Chung
Quoted 4 lines
drivers/mmc/dw_mmc.c +0
-0dwmci_writel (host,DWMCI_PWREN ,1 );
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Quoted 14 lines · Jaehoon Chung
remove this and use callback function like the
host->board_init()? if (host->board_init())host->board_init(host);Then we can reuse the this function for board specific code. Anyway, I think that exynos code didn't exist at here(dw-mmc.c).
Best Regards,
Jaehoon ChungQuoted 4 lines
dwmci_writel(host, DWMCI_PWREN, 1);
I may do this change but I don't own corresponding HW (Exynos-5420 based) so I won't be able to test my changes.
And that's why I propose to apply this patch so driver is now again gets built for any platform and if anybody who have access to Exynos-5420 HW have some time to clean-up then it's good, anyways people will be happy again :)
-Alexey
P.S. I saw you reply on v1 patch you just sent - so feel free to clean-up the driver if it's ok for you or let's keep my "work-around" for now.
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Hi Alexey,
Quoted 24 lines · Alexey Brodkin
Quoted 14 lines · Jaehoon Chung
remove this and use callback function like the
host->board_init()? if (host->board_init())host->board_init(host);Then we can reuse the this function for board specific code. Anyway, I think that exynos code didn't exist at here(dw-mmc.c).
Best Regards,
Jaehoon ChungQuoted 4 lines
dwmci_writel(host, DWMCI_PWREN, 1);I may do this change but I don't own corresponding HW (Exynos-5420 based) so I won't be able to test my changes.
And that's why I propose to apply this patch so driver is now again gets built for any platform and if anybody who have access to Exynos-5420 HW have some time to clean-up then it's good, anyways people will be happy again :)
Quoted 5 lines
-Alexey
P.S. I saw you reply on v1 patch you just sent - so feel free to clean-up the driver if it's ok for you or let's keep my "work-around" for now.
All looks good from my side;
Please do a boot test on the real hardware and let me know before I can apply.
Regards
-- Pantelis
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Quoted 5 lines
All looks good from my side;
Please do a boot test on the real hardware and let me know before I can apply.
Hi Pantelis,
confirming - builds/works good for me.
-Alexey
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Hi All,
Iam a bit confused here.
After Jaehoon Chung has submitted the following patch:
"https://www.mail-archive.com/u-boot at lists.denx.de/msg126921.html"
Do we need to include this patch also?
Regards,
Rajeshwari Shinde.
Quoted 15 lines · Alexey Brodkin
Quoted 5 lines
All looks good from my side;
Please do a boot test on the real hardware and let me know before I can apply.
Hi Pantelis,
confirming - builds/works good for me.
-Alexey
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Regards, Rajeshwari Shinde
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Hi, Rajeshwari
It didn't need to include this patch.
Best Regards,
Jaehoon Chung
Quoted 32 lines · Rajeshwari Birje
Hi All,
Iam a bit confused here.
After Jaehoon Chung has submitted the following patch:
"https://www.mail-archive.com/u-boot at lists.denx.de/msg126921.html"Do we need to include this patch also?
Regards,
Rajeshwari Shinde.Quoted 15 lines · Alexey Brodkin
Quoted 5 lines
All looks good from my side;
Please do a boot test on the real hardware and let me know before I can apply.
Hi Pantelis,
confirming - builds/works good for me.
-Alexey
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH v2 1/1 dwmmc: make driver usable for non-exynos platforms
Quoted 6 lines · Jaehoon Chung
Hi, Rajeshwari
It didn't need to include this patch.
Best Regards,
Jaehoon Chung
Agree, there's no need in this particular patch any more. Jaehoon Chung did appropriate changes in dwmmc driver.
Thanks for collaboration.
-Alexey