brcmfmac: cleanup and sdio txglom feature
cover brcmfmac: cleanup and sdio txglom feature
This series has a number of cleanup patches including removing ioctl() callbacks and providing firmware version information through ethtool driver info callback.
For the SDIO driver it adds support for txglom feature, which transfers multiple transmit packets in one MMC request.
Lastly, the firmware protocol layer is being reworked to allow different protocols being used. This is preparational work for PCIe fullmac support.
This series is intended for v3.14 and depends on the patch series "brcm80211: cleanup fixes and out-of-order fix" with
Message-ID: <[email protected]>
Arend van Spriel (13):
brcmfmac: support hardware extension header in
trace_brcmf_sdpcm_hdr()
brcmfmac: determine sd host controller related variable earlier
brcmfmac: fix driver build issue when CONFIG_BRCMDBG is not set
brcmfmac: determine alignment values during probe
brcmfmac: use platform specific alignment in SDIO
brcmfmac: remove redundant ioctl handlers
brcmfmac: provide firmware version in ethtool driver info
brcmfmac: remove unnecessary EXPORT_SYMBOL() usage
brcmfmac: move firmware related structures to fwil_types.h
brcmfmac: move firmware command code definitions
brcmfmac: remove some unused definitions
brcmfmac: move firmware event related defines to fweh.h
brcmfmac: expose chip information through debugfs
Franky Lin (2):
brcmfmac: add firmware and nvram file name for bcm4339
brcmfmac: add host tx glomming support
Hante Meuleman (4):
brcmfmac: rename dhd_cdc to bcdc
brcmfmac: removed dhd_proto.h.
brcmfmac: Dynamically register a protocol layer.
brcmfmac: Use consistent naming for BCDC.
drivers/net/wireless/brcm80211/brcmfmac/Makefile | 3 +-
drivers/net/wireless/brcm80211/brcmfmac/bcdc.c | 384 ++++++++++++++++
.../brcm80211/brcmfmac/{dhd_proto.h => bcdc.h} | 27 +-
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 3 -
.../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 32 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 482 +-------------------
drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 387 ----------------
.../net/wireless/brcm80211/brcmfmac/dhd_common.c | 7 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c | 36 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 2 +-
.../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 158 +------
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 406 +++++++++++------
drivers/net/wireless/brcm80211/brcmfmac/fweh.h | 54 +++
drivers/net/wireless/brcm80211/brcmfmac/fwil.c | 7 +-
drivers/net/wireless/brcm80211/brcmfmac/fwil.h | 61 +++
.../net/wireless/brcm80211/brcmfmac/fwil_types.h | 304 ++++++++++++
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 10 +-
drivers/net/wireless/brcm80211/brcmfmac/proto.c | 62 +++
drivers/net/wireless/brcm80211/brcmfmac/proto.h | 57 +++
.../net/wireless/brcm80211/brcmfmac/tracepoint.h | 33 +-
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 10 +-
21 files changed, 1304 insertions(+), 1221 deletions(-)
create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
rename drivers/net/wireless/brcm80211/brcmfmac/{dhd_proto.h => bcdc.h} (51%)
delete mode 100644 drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/proto.c
create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/proto.hSignature · 1 line
1.7.10.4
PATCH 1/19 brcmfmac: support hardware extension header in trace_brcmf_sdpcm_hdr()
The SDPCM header can be traced, but it used a fixed header size. With txglom feature the SDPCM header will have additional 8 bytes of hardware extension header so SDIO core can properly handle the txglom packet.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 4 +-- .../net/wireless/brcm80211/brcmfmac/tracepoint.h | 29 ++++++++++++++------ 2 files changed, 22 insertions(+), 11 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +2 -2
@@ -1147,7 +1147,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,u8 rx_seq, fc, tx_seq_max;u32 swheader; -trace_brcmf_sdpcm_hdr (false, header); +trace_brcmf_sdpcm_hdr (SDPCM_RX , header);/* hw header */ len =get_unaligned_le16 (header);
@@ -1271,7 +1271,7 @@ static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header,SDPCM_DOFFSET_MASK ; *(((__le32 *)header) +1 ) =cpu_to_le32 (sw_header); *(((__le32 *)header) +2 ) =0 ; -trace_brcmf_sdpcm_hdr (true, header); +trace_brcmf_sdpcm_hdr (SDPCM_TX , header); }static u8 brcmf_sdbrcm_rxglom (struct brcmf_sdio *bus,u8 rxseq)
drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h +20 -9
@@ -110,21 +110,32 @@ TRACE_EVENT(brcmf_bdchdr,TP_printk ("bdc: prio=%d siglen=%d" , __entry->prio, __entry->siglen) ); +#ifndef SDPCM_RX +#define SDPCM_RX 0 +#endif +#ifndef SDPCM_TX +#define SDPCM_TX 1 +#endif +#ifndef SDPCM_GLOM +#define SDPCM_GLOM 2 +#endif +TRACE_EVENT (brcmf_sdpcm_hdr, - TP_PROTO(bool tx, void *data), -TP_ARGS (tx, data), + TP_PROTO(u8 dir, void *data), +TP_ARGS (dir, data),TP_STRUCT__entry ( - __field(u8, tx) + __field(u8, dir) __field(u16, len) -__array (u8, hdr,12 ) +__dynamic_array (u8, hdr, dir ==SDPCM_GLOM ?20 :12 ) ),TP_fast_assign ( - memcpy(__entry->hdr, data, 12); - __entry->len = __entry->hdr[0] | (__entry->hdr[1] << 8); - __entry->tx = tx ? 1 : 0; + memcpy(__get_dynamic_array(hdr), data, dir == SDPCM_GLOM ? 20 : 12); + __entry->len = *(u8 *)data | (*((u8 *)data + 1) << 8); + __entry->dir = dir; ), -TP_printk ("sdpcm: %s len %u, seq %d" , __entry->tx ?"TX" :"RX" , - __entry->len, __entry->hdr[4 ]) +TP_printk ("sdpcm: %s len %u, seq %d" , + __entry->dir ==SDPCM_RX ?"RX" :"TX" , + __entry->len, ((u8 *)__get_dynamic_array (hdr))[4 ]) );#ifdef CONFIG_BRCM_TRACING
Signature · 1 line
1.7.10.4
PATCH 2/19 brcmfmac: determine sd host controller related variable earlier
In reply to Arend van SprielThe commit "eb9c174 brcmfmac: determine host controller related variables during probe" was not implemented correctly as the information is already needed in brcmf_sdbrcm_probe(). This patch moves it to brcmf_sdioh_attach() instead.
--- .../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 32 +++++++++++--------- 1 file changed, 17 insertions(+), 15 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +17 -15
@@ -278,6 +278,9 @@ static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev)int brcmf_sdioh_attach (struct brcmf_sdio_dev *sdiodev) {int err_ret =0 ; +struct mmc_host *host; +struct sdio_func *func; +uint max_blocks;brcmf_dbg (SDIO ,"\n" );
@@ -299,6 +302,20 @@ int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)brcmf_sdioh_enablefuncs (sdiodev); +/* +* determine host related variables after brcmf_sdio_probe() +* as func->cur_blksize is properly set and F2 init has been +* completed successfully. +*/ + func = sdiodev->func[2 ]; + host = func->card->host; + sdiodev->sg_support = host->max_segs >1 ; + max_blocks =min_t (uint, host->max_blk_count,511u ); + sdiodev->max_request_size =min_t (uint, host->max_req_size, + max_blocks * func->cur_blksize); + sdiodev->max_segment_count =min_t (uint, host->max_segs, +SG_MAX_SINGLE_ALLOC ); + sdiodev->max_segment_size = host->max_seg_size; out:sdio_release_host (sdiodev->func[1 ]);brcmf_dbg (SDIO ,"Done\n" );
@@ -327,8 +344,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,int err;struct brcmf_sdio_dev *sdiodev;struct brcmf_bus *bus_if; -struct mmc_host *host; -uint max_blocks;brcmf_dbg (SDIO ,"Enter\n" );brcmf_dbg (SDIO ,"Class=%x\n" , func->class);
@@ -376,19 +391,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, goto fail; } -/* -* determine host related variables after brcmf_sdio_probe() -* as func->cur_blksize is properly set and F2 init has been -* completed successfully. -*/ - host = func->card->host; - sdiodev->sg_support = host->max_segs >1 ; - max_blocks =min_t (uint, host->max_blk_count,511u ); - sdiodev->max_request_size =min_t (uint, host->max_req_size, - max_blocks * func->cur_blksize); - sdiodev->max_segment_count =min_t (uint, host->max_segs, -SG_MAX_SINGLE_ALLOC ); - sdiodev->max_segment_size = host->max_seg_size;brcmf_dbg (SDIO ,"F2 init completed...\n" );return 0 ;
Signature · 1 line
1.7.10.4
PATCH 3/19 brcmfmac: fix driver build issue when CONFIG_BRCMDBG is not set
In reply to Arend van SprielWhen CONFIG_BRCMDBG is not set we get the following build issue:
CC [M] drivers/net/wireless/brcm80211/brcmfmac/fwsignal.odrivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:
In function ‘brcmf_fws_hdrpush’:
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:852:18:
error: ‘BRCMF_FWS_TYPE_SEQ_LEN’ undeclared
The define BRCMF_FWS_TYPE_SEQ_LEN was introduced by:
commit 6918f38e4ed4e0493a90a4331e0033bdfc806e00
Author: Hante Meuleman <[email protected]>
Date: Wed Oct 23 14:58:51 2013 +0200
brcmfmac: Update fwsignal to fix out of order tx.
Unfortunately, it was put in conditional part of the source file under #ifdef DEBUG.
--- drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +6 -2
@@ -105,8 +105,6 @@ static struct { };#undef BRCMF_FWS_TLV_DEF -#define BRCMF_FWS_TYPE_SEQ_LEN 2 -static const char *brcmf_fws_get_tlv_name (enum brcmf_fws_tlv_type id) {
@@ -126,6 +124,12 @@ static const char *brcmf_fws_get_tlv_name(enum brcmf_fws_tlv_type id)#endif /* DEBUG */ /* +* The PKTTAG tlv has additional bytes when firmware-signalling +* mode has REUSESEQ flag set. +*/ +#define BRCMF_FWS_TYPE_SEQ_LEN 2 + +/* * flags used to enable tlv signalling from firmware. */ #define BRCMF_FWS_FLAGS_RSSI_SIGNALS 0x0001
Signature · 1 line
1.7.10.4
PATCH 4/19 brcmfmac: add firmware and nvram file name for bcm4339
In reply to Arend van SprielFrom: Franky Lin <[email protected]>
Add firmware/nvram file name for bcm4339 so fmac can actually be functional with the chip.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +6 -1
@@ -499,6 +499,8 @@ enum brcmf_sdio_frmtype {#define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt"#define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin"#define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt" +#define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" +#define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt"MODULE_FIRMWARE (BCM43143_FIRMWARE_NAME );MODULE_FIRMWARE (BCM43143_NVRAM_NAME );
@@ -514,6 +516,8 @@ MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME);MODULE_FIRMWARE (BCM4334_NVRAM_NAME );MODULE_FIRMWARE (BCM4335_FIRMWARE_NAME );MODULE_FIRMWARE (BCM4335_NVRAM_NAME ); +MODULE_FIRMWARE (BCM4339_FIRMWARE_NAME ); +MODULE_FIRMWARE (BCM4339_NVRAM_NAME );struct brcmf_firmware_names {u32 chipid;
@@ -537,7 +541,8 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BCM4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, { BCM4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, { BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, - { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) } + { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, + { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) } };
Signature · 1 line
1.7.10.4
PATCH 5/19 brcmfmac: add host tx glomming support
In reply to Arend van SprielFrom: Franky Lin <[email protected]>
New WiFi full dongle supports receiving chained packets in one command through the SDIO bus. This patch adds the support on the host side to send chained packets.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 327 ++++++++++++++------ 1 file changed, 227 insertions(+), 100 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +227 -100
@@ -32,6 +32,7 @@#include <linux/debugfs.h> #include <linux/vmalloc.h> #include <linux/platform_data/brcmfmac-sdio.h> +#include <linux/moduleparam.h> #include <asm/unaligned.h> #include <defs.h> #include <brcmu_wifi.h>
@@ -110,6 +111,8 @@ struct rte_console {#define BRCMF_TXBOUND 20/* Default for max tx frames in one scheduling */ +#define BRCMF_DEFAULT_TXGLOM_SIZE 32/* max tx frames in glom chain */ +#define BRCMF_TXMINMAX 1/* Max tx frames if rx still pending */ #define MEMBLOCK 2048/* Block size used for downloading
@@ -360,6 +363,8 @@ struct brcmf_sdio_hdrinfo {u16 len_left;u16 len_nxtfrm;u8 dat_offset; +bool lastfrm; +u16 tail_pad; };/* misc chip info needed by some of the routines */
@@ -455,6 +460,8 @@ struct brcmf_sdio {bool sleeping;/* SDIO bus sleeping */ u8 tx_hdrlen;/* sdio bus header length for tx packet */ +bool txglom;/* host tx glomming enable flag */ +struct sk_buff *txglom_sgpad;/* scatter-gather padding buffer */ };/* clkstate */
@@ -479,6 +486,10 @@ static const uint max_roundup = 512;#define ALIGNMENT 4 +static int brcmf_sdio_txglomsz =BRCMF_DEFAULT_TXGLOM_SIZE ; +module_param_named (txglomsz, brcmf_sdio_txglomsz, int,0 ); +MODULE_PARM_DESC (txglomsz,"maximum tx packet chain size [SDIO]" ); +enum brcmf_sdio_frmtype {BRCMF_SDIO_FT_NORMAL ,BRCMF_SDIO_FT_SUPER ,
@@ -1102,10 +1113,18 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)* host and WiFi dongle which contains information needed for SDIO core and * firmware * -* It consists of 2 parts: hw header and software header +* It consists of 3 parts: hardware header, hardware extension header and +* software header * hardware header (frame tag) - 4 bytes * Byte 0~1: Frame length * Byte 2~3: Checksum, bit-wise inverse of frame length +* hardware extension header - 8 bytes +* Tx glom mode only, N/A for Rx or normal Tx +* Byte 0~1: Packet length excluding hw frame tag +* Byte 2: Reserved +* Byte 3: Frame flags, bit 0: last frame indication +* Byte 4~5: Reserved +* Byte 6~7: Tail padding length * software header - 8 bytes * Byte 0: Rx/Tx sequence number * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
@@ -1116,6 +1135,7 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)* Byte 6~7: Reserved */ #define SDPCM_HWHDR_LEN 4 +#define SDPCM_HWEXT_LEN 8#define SDPCM_SWHDR_LEN 8#define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN)/* software header */
@@ -1265,18 +1285,28 @@ static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length)static void brcmf_sdio_hdpack (struct brcmf_sdio *bus,u8 *header,struct brcmf_sdio_hdrinfo *hd_info) { -u32 sw_header; +u32 hdrval; +u8 hdr_offset;brcmf_sdio_update_hwhdr (header, hd_info->len); - - sw_header = bus->tx_seq; - sw_header |= (hd_info->channel <<SDPCM_CHANNEL_SHIFT ) & -SDPCM_CHANNEL_MASK ; - sw_header |= (hd_info->dat_offset <<SDPCM_DOFFSET_SHIFT ) & -SDPCM_DOFFSET_MASK ; - *(((__le32 *)header) +1 ) =cpu_to_le32 (sw_header); - *(((__le32 *)header) +2 ) =0 ; -trace_brcmf_sdpcm_hdr (SDPCM_TX , header); + hdr_offset =SDPCM_HWHDR_LEN ; + +if (bus->txglom) { + hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm <<24 ); + *((__le32 *)(header + hdr_offset)) =cpu_to_le32 (hdrval); + hdrval = (u16 )hd_info->tail_pad <<16 ; + *(((__le32 *)(header + hdr_offset)) +1 ) =cpu_to_le32 (hdrval); + hdr_offset +=SDPCM_HWEXT_LEN ; + } + + hdrval = hd_info->seq_num; + hdrval |= (hd_info->channel <<SDPCM_CHANNEL_SHIFT ) & +SDPCM_CHANNEL_MASK ; + hdrval |= (hd_info->dat_offset <<SDPCM_DOFFSET_SHIFT ) & +SDPCM_DOFFSET_MASK ; + *((__le32 *)(header + hdr_offset)) =cpu_to_le32 (hdrval); + *(((__le32 *)(header + hdr_offset)) +1 ) =0 ; +trace_brcmf_sdpcm_hdr (SDPCM_TX + !!(bus->txglom), header); }static u8 brcmf_sdbrcm_rxglom (struct brcmf_sdio *bus,u8 rxseq)
@@ -1876,6 +1906,34 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)return ; } +static int brcmf_sdio_txpkt_hdalign (struct brcmf_sdio *bus,struct sk_buff *pkt) +{ +u16 head_align, head_pad; +u8 *dat_buf; + +/* SDIO ADMA requires at least 32 bit alignment */ + head_align =4 ; +if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align >4 ) + head_align = bus->sdiodev->pdata->sd_head_align; + + dat_buf = (u8 *)(pkt->data); + +/* Check head padding */ + head_pad = ((unsigned long )dat_buf % head_align); +if (head_pad) { +if (skb_headroom (pkt) < head_pad) { + bus->sdiodev->bus_if->tx_realloc++; + head_pad =0 ; +if (skb_cow (pkt, head_pad)) +return -ENOMEM ; + } +skb_push (pkt, head_pad); + dat_buf = (u8 *)(pkt->data); +memset (dat_buf,0 , head_pad + bus->tx_hdrlen); + } +return head_pad; +} +/** * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage.
@@ -1885,16 +1943,18 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)/* bit mask of data length chopped from the previous packet */ #define ALIGN_SKB_CHOP_LEN_MASK 0x7fff -static int brcmf_sdio_txpkt_prep_sg (struct brcmf_sdio_dev *sdiodev, +static int brcmf_sdio_txpkt_prep_sg (struct brcmf_sdio *bus,struct sk_buff_head *pktq, -struct sk_buff *pkt,uint chan) +struct sk_buff *pkt,u16 total_len) { +struct brcmf_sdio_dev *sdiodev;struct sk_buff *pkt_pad; -u16 tail_pad, tail_chop, sg_align; +u16 tail_pad, tail_chop, sg_align, chain_pad;unsigned int blksize; -u8 *dat_buf; -int ntail; +bool lastfrm; +int ntail, ret; + sdiodev = bus->sdiodev; blksize = sdiodev->func[SDIO_FUNC_2 ]->cur_blksize; sg_align =4 ;if (sdiodev->pdata && sdiodev->pdata->sd_sgentry_align >4 )
@@ -1903,14 +1963,23 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev,WARN_ON (blksize % sg_align);/* Check tail padding */ - pkt_pad =NULL ; + lastfrm =skb_queue_is_last (pktq, pkt); + tail_pad =0 ; tail_chop = pkt->len % sg_align; - tail_pad = sg_align - tail_chop; - tail_pad += blksize - (pkt->len + tail_pad) % blksize; +if (tail_chop) + tail_pad = sg_align - tail_chop; + chain_pad = (total_len + tail_pad) % blksize; +if (lastfrm && chain_pad) + tail_pad += blksize - chain_pad;if (skb_tailroom (pkt) < tail_pad && pkt->len > blksize) { - pkt_pad =brcmu_pkt_buf_get_skb (tail_pad + tail_chop); + pkt_pad = bus->txglom_sgpad; +if (pkt_pad ==NULL ) +brcmu_pkt_buf_get_skb (tail_pad + tail_chop);if (pkt_pad ==NULL )return -ENOMEM ; + ret =brcmf_sdio_txpkt_hdalign (bus, pkt_pad); +if (unlikely (ret <0 )) +return ret;memcpy (pkt_pad->data, pkt->data + pkt->len - tail_chop, tail_chop);
@@ -1925,14 +1994,10 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev,return -ENOMEM ;if (skb_linearize (pkt))return -ENOMEM ; - dat_buf = (u8 *)(pkt->data);__skb_put (pkt, tail_pad); } -if (pkt_pad) -return pkt->len + tail_chop; -else -return pkt->len - tail_pad; +return tail_pad; }/**
@@ -1951,58 +2016,66 @@ static int brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { - u16 head_pad, head_align; + u16 head_pad, total_len;struct sk_buff *pkt_next; -u8 *dat_buf; -int err; +u8 txseq; +int ret;struct brcmf_sdio_hdrinfo hd_info = {0 }; -/* SDIO ADMA requires at least 32 bit alignment */ - head_align =4 ; -if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align >4 ) - head_align = bus->sdiodev->pdata->sd_head_align; + txseq = bus->tx_seq; + total_len =0 ; + skb_queue_walk(pktq, pkt_next) { +/* alignment packet inserted in previous +* loop cycle can be skipped as it is +* already properly aligned and does not +* need an sdpcm header. +*/ +if (*(u32 *)(pkt_next->cb) &ALIGN_SKB_FLAG ) +continue ; - pkt_next = pktq->next; - dat_buf = (u8 *)(pkt_next->data); +/* align packet data pointer */ + ret =brcmf_sdio_txpkt_hdalign (bus, pkt_next); +if (ret <0 ) +return ret; + head_pad = (u16 )ret; +if (head_pad) +memset (pkt_next->data,0 , head_pad + bus->tx_hdrlen); -/* Check head padding */ - head_pad = ((unsigned long )dat_buf % head_align); -if (head_pad) { -if (skb_headroom (pkt_next) < head_pad) { - bus->sdiodev->bus_if->tx_realloc++; - head_pad =0 ; -if (skb_cow (pkt_next, head_pad)) -return -ENOMEM ; - } -skb_push (pkt_next, head_pad); - dat_buf = (u8 *)(pkt_next->data); -memset (dat_buf,0 , head_pad + bus->tx_hdrlen); - } + total_len += pkt_next->len; -if (bus->sdiodev->sg_support && pktq->qlen >1 ) { - err =brcmf_sdio_txpkt_prep_sg (bus->sdiodev, pktq, - pkt_next, chan); -if (err <0 ) -return err; - hd_info.len = (u16 )err; - }else { hd_info.len = pkt_next->len; - } - - hd_info.channel = chan; - hd_info.dat_offset = head_pad + bus->tx_hdrlen; - -/* Now fill the header */ -brcmf_sdio_hdpack (bus, dat_buf, &hd_info); - -if (BRCMF_BYTES_ON () && - ((BRCMF_CTL_ON () && chan ==SDPCM_CONTROL_CHANNEL ) || - (BRCMF_DATA_ON () && chan !=SDPCM_CONTROL_CHANNEL ))) -brcmf_dbg_hex_dump (true, pkt_next, hd_info.len,"Tx Frame:\n" ); -else if (BRCMF_HDRS_ON ()) -brcmf_dbg_hex_dump (true, pkt_next, head_pad + bus->tx_hdrlen, -"Tx Header:\n" ); + hd_info.lastfrm =skb_queue_is_last (pktq, pkt_next); +if (bus->txglom && pktq->qlen >1 ) { + ret =brcmf_sdio_txpkt_prep_sg (bus, pktq, + pkt_next, total_len); +if (ret <0 ) +return ret; + hd_info.tail_pad = (u16 )ret; + total_len += (u16 )ret; + } + hd_info.channel = chan; + hd_info.dat_offset = head_pad + bus->tx_hdrlen; + hd_info.seq_num = txseq++; + +/* Now fill the header */ +brcmf_sdio_hdpack (bus, pkt_next->data, &hd_info); + +if (BRCMF_BYTES_ON () && + ((BRCMF_CTL_ON () && chan ==SDPCM_CONTROL_CHANNEL ) || + (BRCMF_DATA_ON () && chan !=SDPCM_CONTROL_CHANNEL ))) +brcmf_dbg_hex_dump (true, pkt_next, hd_info.len, +"Tx Frame:\n" ); +else if (BRCMF_HDRS_ON ()) +brcmf_dbg_hex_dump (true, pkt_next, + head_pad + bus->tx_hdrlen, +"Tx Header:\n" ); + } +/* Hardware length tag of the first packet should be total +* length of the chain (including padding) +*/ +if (bus->txglom) +brcmf_sdio_update_hwhdr (pktq->next->data, total_len);return 0 ; }
@@ -2020,6 +2093,7 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) {u8 *hdr;u32 dat_offset; +u16 tail_pad;u32 dummy_flags, chop_len;struct sk_buff *pkt_next, *tmp, *pkt_prev;
@@ -2029,42 +2103,42 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) chop_len = dummy_flags &ALIGN_SKB_CHOP_LEN_MASK ;if (chop_len) { pkt_prev = pkt_next->prev; -memcpy (pkt_prev->data + pkt_prev->len, - pkt_next->data, chop_len);skb_put (pkt_prev, chop_len); }__skb_unlink (pkt_next, pktq);brcmu_pkt_buf_free_skb (pkt_next); }else { - hdr = pkt_next->data +SDPCM_HWHDR_LEN ; + hdr = pkt_next->data + bus->tx_hdrlen -SDPCM_SWHDR_LEN ; dat_offset =le32_to_cpu (*(__le32 *)hdr); dat_offset = (dat_offset &SDPCM_DOFFSET_MASK ) >>SDPCM_DOFFSET_SHIFT ;skb_pull (pkt_next, dat_offset); +if (bus->txglom) { + tail_pad =le16_to_cpu (*(__le16 *)(hdr -2 )); +skb_trim (pkt_next, pkt_next->len - tail_pad); + } } } }/* Writes a HW/SW header into the packet and sends it. */ /* Assumes: (a) header space already there, (b) caller holds lock */ -static int brcmf_sdbrcm_txpkt (struct brcmf_sdio *bus,struct sk_buff *pkt, +static int brcmf_sdbrcm_txpkt (struct brcmf_sdio *bus,struct sk_buff_head *pktq,uint chan) {int ret;int i; -struct sk_buff_head localq; +struct sk_buff *pkt_next, *tmp;brcmf_dbg (TRACE ,"Enter\n" ); -__skb_queue_head_init (&localq); -__skb_queue_tail (&localq, pkt); - ret =brcmf_sdio_txpkt_prep (bus, &localq, chan); + ret =brcmf_sdio_txpkt_prep (bus, pktq, chan);if (ret) goto done;sdio_claim_host (bus->sdiodev->func[1 ]); ret =brcmf_sdcard_send_pkt (bus->sdiodev, bus->sdiodev->sbwad, -SDIO_FUNC_2 ,F2SYNC , &localq); +SDIO_FUNC_2 ,F2SYNC , pktq); bus->sdcnt.f2txdata++;if (ret <0 ) {
@@ -2088,42 +2162,56 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,if ((hi ==0 ) && (lo ==0 ))break ; } - }sdio_release_host (bus->sdiodev->func[1 ]); -if (ret ==0 ) - bus->tx_seq = (bus->tx_seq +1 ) %SDPCM_SEQ_WRAP ; done: -brcmf_sdio_txpkt_postp (bus, &localq); -__skb_dequeue_tail (&localq); -brcmf_txcomplete (bus->sdiodev->dev, pkt, ret ==0 ); +brcmf_sdio_txpkt_postp (bus, pktq); +if (ret ==0 ) + bus->tx_seq = (bus->tx_seq + pktq->qlen) %SDPCM_SEQ_WRAP ; + skb_queue_walk_safe(pktq, pkt_next, tmp) { +__skb_unlink (pkt_next, pktq); +brcmf_txcomplete (bus->sdiodev->dev, pkt_next, ret ==0 ); + }return ret; }static uint brcmf_sdbrcm_sendfromq (struct brcmf_sdio *bus,uint maxframes) {struct sk_buff *pkt; +struct sk_buff_head pktq;u32 intstatus =0 ; -int ret =0 , prec_out; +int ret =0 , prec_out, i;uint cnt =0 ; -u8 tx_prec_map; +u8 tx_prec_map, pkt_num;brcmf_dbg (TRACE ,"Enter\n" ); tx_prec_map = ~bus->flowcontrol;/* Send frames until the limit or some other event */ -for (cnt =0 ; (cnt < maxframes) &&data_ok (bus); cnt++) { +for (cnt =0 ; (cnt < maxframes) &&data_ok (bus);) { + pkt_num =1 ; +__skb_queue_head_init (&pktq); +if (bus->txglom) + pkt_num =min_t (u8, bus->tx_max - bus->tx_seq, + brcmf_sdio_txglomsz); + pkt_num =min_t (u32, pkt_num, +brcmu_pktq_mlen (&bus->txq, ~bus->flowcontrol));spin_lock_bh (&bus->txqlock); - pkt =brcmu_pktq_mdeq (&bus->txq, tx_prec_map, &prec_out); -if (pkt ==NULL ) { -spin_unlock_bh (&bus->txqlock); -break ; +for (i =0 ; i < pkt_num; i++) { + pkt =brcmu_pktq_mdeq (&bus->txq, tx_prec_map, + &prec_out); +if (pkt ==NULL ) +break ; +__skb_queue_tail (&pktq, pkt); }spin_unlock_bh (&bus->txqlock); +if (i ==0 ) +break ; - ret =brcmf_sdbrcm_txpkt (bus, pkt,SDPCM_DATA_CHANNEL ); + ret =brcmf_sdbrcm_txpkt (bus, &pktq,SDPCM_DATA_CHANNEL ); + cnt += i;/* In poll mode, need to check for other events */ if (!bus->intr && cnt) {
@@ -2670,7 +2758,7 @@ static int brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { u8 *frame; -u16 len; +u16 len, pad;uint retries =0 ;u8 doff =0 ;int ret =-1 ;
@@ -2697,13 +2785,15 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) doff += bus->tx_hdrlen;/* Round send length to next SDIO block */ + pad =0 ;if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { -u16 pad = bus->blocksize - (len % bus->blocksize); -if ((pad <= bus->roundup) && (pad < bus->blocksize)) - len += pad; + pad = bus->blocksize - (len % bus->blocksize); +if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad =0 ; }else if (len %BRCMF_SDALIGN ) { - len +=BRCMF_SDALIGN - (len %BRCMF_SDALIGN ); + pad =BRCMF_SDALIGN - (len %BRCMF_SDALIGN ); } + len += pad;/* Satisfy length-alignment requirements */ if (len & (ALIGNMENT -1 ))
@@ -2719,8 +2809,16 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) hd_info.len = (u16 )msglen; hd_info.channel =SDPCM_CONTROL_CHANNEL ; hd_info.dat_offset = doff; + hd_info.seq_num = bus->tx_seq; +if (bus->txglom) { + hd_info.lastfrm = true; + hd_info.tail_pad = pad; + }brcmf_sdio_hdpack (bus, frame, &hd_info); +if (bus->txglom) +brcmf_sdio_update_hwhdr (frame, len); +if (!data_ok (bus)) {brcmf_dbg (INFO ,"No bus credit bus->tx_max %d, bus->tx_seq %d\n" , bus->tx_max, bus->tx_seq);
@@ -3435,11 +3533,15 @@ static int brcmf_sdbrcm_bus_preinit(struct device *dev)struct brcmf_bus *bus_if =dev_get_drvdata (dev);struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;struct brcmf_sdio *bus = sdiodev->bus; +uint pad_size;u32 value;u8 idx;int err; -/* sdio bus core specific dcmd */ +/* the commands below use the terms tx and rx from +* a device perspective, ie. bus:txglom affects the +* bus transfers from device to host. +*/ idx =brcmf_sdio_chip_getinfidx (bus->ci,BCMA_CORE_SDIO_DEV );if (bus->ci->c_inf[idx].rev <12 ) {/* for sdio core rev < 12, disable txgloming */
@@ -3456,6 +3558,32 @@ static int brcmf_sdbrcm_bus_preinit(struct device *dev) err =brcmf_iovar_data_set (dev,"bus:txglomalign" , &value,sizeof (u32)); } + +if (err <0 ) + goto done; + + bus->tx_hdrlen =SDPCM_HWHDR_LEN +SDPCM_SWHDR_LEN ; +if (sdiodev->sg_support) { + bus->txglom = false; + value =1 ; + pad_size = bus->sdiodev->func[2 ]->cur_blksize <<1 ; + bus->txglom_sgpad =brcmu_pkt_buf_get_skb (pad_size); +if (!bus->txglom_sgpad) +brcmf_err ("allocating txglom padding skb failed, reduced performance\n" ); + + err =brcmf_iovar_data_set (bus->sdiodev->dev,"bus:rxglom" , + &value,sizeof (u32)); +if (err <0 ) { +/* bus:rxglom is allowed to fail */ + err =0 ; + }else { + bus->txglom = true; + bus->tx_hdrlen +=SDPCM_HWEXT_LEN ; + } + } +brcmf_bus_add_txhdrlen (bus->sdiodev->dev, bus->tx_hdrlen); + +done:return err; }
@@ -3929,6 +4057,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)brcmf_sdbrcm_release_dongle (bus); } +brcmu_pkt_buf_free_skb (bus->txglom_sgpad);brcmf_sdbrcm_release_malloc (bus);kfree (bus);
@@ -4034,8 +4163,6 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)brcmf_sdio_debugfs_create (bus);brcmf_dbg (INFO ,"completed!!\n" ); -brcmf_bus_add_txhdrlen (bus->sdiodev->dev, bus->tx_hdrlen); -/* if firmware path present try to download and bring up bus */ ret =brcmf_bus_start (bus->sdiodev->dev);if (ret !=0 ) {
Signature · 1 line
1.7.10.4
PATCH 6/19 brcmfmac: rename dhd_cdc to bcdc
In reply to Arend van SprielFrom: Hante Meuleman <[email protected]>
dhd_cdc is renamed to bcdc. This is a step in cleaning and restructuring protocol layer. This is done so new protocols can be added in the future. This step only renames the source files.
---
drivers/net/wireless/brcm80211/brcmfmac/Makefile | 2 +-
drivers/net/wireless/brcm80211/brcmfmac/{dhd_cdc.c => bcdc.c} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename drivers/net/wireless/brcm80211/brcmfmac/{dhd_cdc.c => bcdc.c} (100%)drivers/net/wireless/brcm80211/brcmfmac/Makefile +1 -1
@@ -28,7 +28,7 @@ brcmfmac-objs += \ fweh.o \ fwsignal.o \ p2p.o \ - dhd_cdc.o \ + bcdc.o \ dhd_common.o \ dhd_linux.o \ btcoex.o
drivers/net/wireless/brcm80211/brcmfmac/bcdc.c renamed from drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +0 -0
Signature · 1 line
1.7.10.4
PATCH v2 6/19 brcmfmac: rename dhd_cdc to bcdc
From: Hante Meuleman <[email protected]>
dhd_cdc is renamed to bcdc. This is a step in cleaning and restructuring protocol layer. This is done so new protocols can be added in the future. This step only renames the source files.
---
Hi John,
Observed that the original patch did not use a git move.
This reworked patch replaces the patch with Message-ID:
Regards,
Arend
---
drivers/net/wireless/brcm80211/brcmfmac/Makefile | 2 +-
drivers/net/wireless/brcm80211/brcmfmac/{dhd_cdc.c => bcdc.c} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename drivers/net/wireless/brcm80211/brcmfmac/{dhd_cdc.c => bcdc.c} (100%)drivers/net/wireless/brcm80211/brcmfmac/Makefile +1 -1
@@ -28,7 +28,7 @@ brcmfmac-objs += \ fweh.o \ fwsignal.o \ p2p.o \ - dhd_cdc.o \ + bcdc.o \ dhd_common.o \ dhd_linux.o \ btcoex.o
drivers/net/wireless/brcm80211/brcmfmac/bcdc.c renamed from drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +0 -0
Signature · 1 line
1.7.10.4
PATCH 7/19 brcmfmac: removed dhd_proto.h.
In reply to Arend van SprielFrom: Hante Meuleman <[email protected]>
dhd_proto.h was cleaned up and prototypes were moved to dhd.h. dhd_proto.h was removed. This is a step in cleaning and restucturing protocol layer.
--- drivers/net/wireless/brcm80211/brcmfmac/bcdc.c | 1 - drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 15 ++++++++ .../net/wireless/brcm80211/brcmfmac/dhd_common.c | 1 - .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 1 - .../net/wireless/brcm80211/brcmfmac/dhd_proto.h | 39 -------------------- drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 1 - 6 files changed, 15 insertions(+), 43 deletions(-) delete mode 100644 drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h
drivers/net/wireless/brcm80211/brcmfmac/bcdc.c +0 -1
@@ -26,7 +26,6 @@#include <brcmu_wifi.h> #include "dhd.h" -#include "dhd_proto.h" #include "dhd_bus.h" #include "fwsignal.h" #include "dhd_dbg.h"
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +15 -0
@@ -635,6 +635,18 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev);/* Return pointer to interface name */ char *brcmf_ifname (struct brcmf_pub *drvr,int idx); +/* Linkage, sets prot link and updates hdrlen in pub */ +int brcmf_proto_attach (struct brcmf_pub *drvr); + +/* Unlink, frees allocated protocol memory (including brcmf_proto) */ +void brcmf_proto_detach (struct brcmf_pub *drvr); + +/* Add any protocol-specific data header. +* Caller must reserve prot_hdrlen prepend space. +*/ +void brcmf_proto_hdrpush (struct brcmf_pub *,int ifidx,u8 offset, +struct sk_buff *txp); +/* Query dongle */ int brcmf_proto_cdc_query_dcmd (struct brcmf_pub *drvr,int ifidx,uint cmd,void *buf,uint len);
@@ -655,4 +667,7 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp);void brcmf_txfinalize (struct brcmf_pub *drvr,struct sk_buff *txp,bool success); +/* Sets dongle media info (drv_version, mac address). */ +int brcmf_c_preinit_dcmds (struct brcmf_if *ifp); +#endif /* _BRCMF_H_ */
drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +0 -1
@@ -21,7 +21,6 @@#include <brcmu_utils.h> #include "dhd.h" #include "dhd_bus.h" -#include "dhd_proto.h" #include "dhd_dbg.h" #include "fwil.h" #include "tracepoint.h"
drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +0 -1
@@ -24,7 +24,6 @@#include "dhd.h" #include "dhd_bus.h" -#include "dhd_proto.h" #include "dhd_dbg.h" #include "fwil_types.h" #include "p2p.h"
drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h deleted +0 -39
@@ -1,39 +0,0 @@ -/* -* Copyright (c) 2010 Broadcom Corporation -* -* Permission to use, copy, modify, and/or distribute this software for any -* purpose with or without fee is hereby granted, provided that the above -* copyright notice and this permission notice appear in all copies. -* -* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -*/ - -#ifndef _BRCMF_PROTO_H_ -#define _BRCMF_PROTO_H_ - -/* -* Exported from the brcmf protocol module (brcmf_cdc) -*/ - -/* Linkage, sets prot link and updates hdrlen in pub */ -int brcmf_proto_attach (struct brcmf_pub *drvr); - -/* Unlink, frees allocated protocol memory (including brcmf_proto) */ -void brcmf_proto_detach (struct brcmf_pub *drvr); - -/* Add any protocol-specific data header. -* Caller must reserve prot_hdrlen prepend space. -*/ -void brcmf_proto_hdrpush (struct brcmf_pub *,int ifidx,u8 offset, -struct sk_buff *txp); - -/* Sets dongle media info (drv_version, mac address). */ -int brcmf_c_preinit_dcmds (struct brcmf_if *ifp); - -#endif /* _BRCMF_PROTO_H_ */
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +0 -1
@@ -27,7 +27,6 @@#include <brcmu_utils.h> #include <brcmu_wifi.h> #include "dhd.h" -#include "dhd_proto.h" #include "dhd_dbg.h" #include "dhd_bus.h" #include "fwil.h"
Signature · 1 line
1.7.10.4
PATCH 8/19 brcmfmac: determine alignment values during probe
In reply to Arend van SprielThe alignment values were being determined for each transmit and receive depending on platform data. Instead determine these once during the probe.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 48 ++++++++++---------- 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +24 -24
@@ -462,6 +462,8 @@ struct brcmf_sdio {u8 tx_hdrlen;/* sdio bus header length for tx packet */ bool txglom;/* host tx glomming enable flag */ struct sk_buff *txglom_sgpad;/* scatter-gather padding buffer */ +u16 head_align;/* buffer pointer alignment */ +u16 sgentry_align;/* scatter-gather buffer alignment */ };/* clkstate */
@@ -1313,7 +1315,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) {u16 dlen, totlen;u8 *dptr, num =0 ; -u32 align =0 ;u16 sublen;struct sk_buff *pfirst, *pnext;
@@ -1328,11 +1329,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)brcmf_dbg (SDIO ,"start: glomd %p glom %p\n" , bus->glomd,skb_peek (&bus->glom)); -if (bus->sdiodev->pdata) - align = bus->sdiodev->pdata->sd_sgentry_align; -if (align <4 ) - align =4 ; -/* If there's a descriptor, generate the packet chain */ if (bus->glomd) { pfirst = pnext =NULL ;
@@ -1356,9 +1352,9 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) pnext =NULL ;break ; } -if (sublen % align) { +if (sublen % bus->sgentry_align) {brcmf_err ("sublen %d not multiple of %d\n" , - sublen, align); + sublen, bus->sgentry_align); } totlen += sublen;
@@ -1371,7 +1367,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) }/* Allocate/chain packet for next subframe */ - pnext =brcmu_pkt_buf_get_skb (sublen + align); + pnext =brcmu_pkt_buf_get_skb (sublen + bus->sgentry_align);if (pnext ==NULL ) {brcmf_err ("bcm_pkt_buf_get_skb failed, num %d len %d\n" , num, sublen);
@@ -1380,7 +1376,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)skb_queue_tail (&bus->glom, pnext);/* Adhere to start alignment requirements */ -pkt_align (pnext, sublen, align); +pkt_align (pnext, sublen, bus->sgentry_align); }/* If all allocations succeeded, save packet chain
@@ -1908,18 +1904,13 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)static int brcmf_sdio_txpkt_hdalign (struct brcmf_sdio *bus,struct sk_buff *pkt) { -u16 head_align, head_pad; +u16 head_pad;u8 *dat_buf; -/* SDIO ADMA requires at least 32 bit alignment */ - head_align =4 ; -if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align >4 ) - head_align = bus->sdiodev->pdata->sd_head_align; - dat_buf = (u8 *)(pkt->data);/* Check head padding */ - head_pad = ((unsigned long )dat_buf % head_align); + head_pad = ((unsigned long )dat_buf % bus->head_align);if (head_pad) {if (skb_headroom (pkt) < head_pad) { bus->sdiodev->bus_if->tx_realloc++;
@@ -1949,25 +1940,22 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, {struct brcmf_sdio_dev *sdiodev;struct sk_buff *pkt_pad; -u16 tail_pad, tail_chop, sg_align, chain_pad; +u16 tail_pad, tail_chop, chain_pad;unsigned int blksize;bool lastfrm;int ntail, ret; sdiodev = bus->sdiodev; blksize = sdiodev->func[SDIO_FUNC_2 ]->cur_blksize; - sg_align =4 ; -if (sdiodev->pdata && sdiodev->pdata->sd_sgentry_align >4 ) - sg_align = sdiodev->pdata->sd_sgentry_align;/* sg entry alignment should be a divisor of block size */ -WARN_ON (blksize % sg_align); +WARN_ON (blksize % bus->sgentry_align);/* Check tail padding */ lastfrm =skb_queue_is_last (pktq, pkt); tail_pad =0 ; - tail_chop = pkt->len % sg_align; + tail_chop = pkt->len % bus->sgentry_align;if (tail_chop) - tail_pad = sg_align - tail_chop; + tail_pad = bus->sgentry_align - tail_chop; chain_pad = (total_len + tail_pad) % blksize;if (lastfrm && chain_pad) tail_pad += blksize - chain_pad;
@@ -4099,6 +4087,18 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->txminmax =BRCMF_TXMINMAX ; bus->tx_seq =SDPCM_SEQ_WRAP -1 ; +/* platform specific configuration: +* alignments must be at least 4 bytes for ADMA +*/ + bus->head_align =ALIGNMENT ; + bus->sgentry_align =ALIGNMENT ; +if (sdiodev->pdata) { +if (sdiodev->pdata->sd_head_align >ALIGNMENT ) + bus->head_align = sdiodev->pdata->sd_head_align; +if (sdiodev->pdata->sd_sgentry_align >ALIGNMENT ) + bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; + } +INIT_WORK (&bus->datawork, brcmf_sdio_dataworker); bus->brcmf_wq =create_singlethread_workqueue ("brcmf_wq" );if (bus->brcmf_wq ==NULL ) {
Signature · 1 line
1.7.10.4
PATCH 9/19 brcmfmac: use platform specific alignment in SDIO
In reply to Arend van SprielThe SDIO part of the brcmfmac driver uses a static define BRCMF_SDALIGN to align buffers used for SDIO transfers. This patch replaces it by using alignment derived from the platform specific data.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 50 +++++++++----------- 1 file changed, 22 insertions(+), 28 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +22 -28
@@ -389,7 +389,7 @@ struct brcmf_sdio {u8 tx_seq;/* Transmit sequence number (next) */ u8 tx_max;/* Maximum transmit sequence allowed */ -u8 hdrbuf[MAX_HDR_READ +BRCMF_SDALIGN ]; +u8 *hdrbuf;/* buffer for handling rx frame */ u8 *rxhdr;/* Header of current rx frame (in hdrbuf) */ u8 rx_seq;/* Receive sequence number (expected) */ struct brcmf_sdio_hdrinfo cur_read;
@@ -1580,9 +1580,9 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) goto done; rbuf = bus->rxbuf; - pad = ((unsigned long )rbuf %BRCMF_SDALIGN ); + pad = ((unsigned long )rbuf % bus->head_align);if (pad) - rbuf += (BRCMF_SDALIGN - pad); + rbuf += (bus->head_align - pad);/* Copy the already-read portion over */ memcpy (buf, hdr,BRCMF_FIRSTREAD );
@@ -1596,14 +1596,10 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)if ((pad <= bus->roundup) && (pad < bus->blocksize) && ((len + pad) < bus->sdiodev->bus_if->maxctl)) rdlen += pad; - }else if (rdlen %BRCMF_SDALIGN ) { - rdlen +=BRCMF_SDALIGN - (rdlen %BRCMF_SDALIGN ); + }else if (rdlen % bus->head_align) { + rdlen += bus->head_align - (rdlen % bus->head_align); } -/* Satisfy length-alignment requirements */ -if (rdlen & (ALIGNMENT -1 )) - rdlen =roundup (rdlen,ALIGNMENT ); -/* Drop if the read is too big or it exceeds our maximum */ if ((rdlen +BRCMF_FIRSTREAD ) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
@@ -1668,8 +1664,8 @@ static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)if (*pad <= bus->roundup && *pad < bus->blocksize && *rdlen + *pad +BRCMF_FIRSTREAD <MAX_RX_DATASZ ) *rdlen += *pad; - }else if (*rdlen %BRCMF_SDALIGN ) { - *rdlen +=BRCMF_SDALIGN - (*rdlen %BRCMF_SDALIGN ); + }else if (*rdlen % bus->head_align) { + *rdlen += bus->head_align - (*rdlen % bus->head_align); } }
@@ -1757,7 +1753,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)brcmf_pad (bus, &pad, &rd->len_left); pkt =brcmu_pkt_buf_get_skb (rd->len_left + head_read + -BRCMF_SDALIGN ); + bus->head_align);if (!pkt) {/* Give up on data, request rtx of events */ brcmf_err ("brcmu_pkt_buf_get_skb failed\n" );
@@ -1767,7 +1763,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)continue ; }skb_pull (pkt, head_read); -pkt_align (pkt, rd->len_left,BRCMF_SDALIGN ); +pkt_align (pkt, rd->len_left, bus->head_align); ret =brcmf_sdcard_recv_pkt (bus->sdiodev, bus->sdiodev->sbwad,SDIO_FUNC_2 ,F2SYNC , pkt);
@@ -2762,14 +2758,14 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) len = (msglen += bus->tx_hdrlen);/* Add alignment padding (optional for ctl frames) */ - doff = ((unsigned long )frame %BRCMF_SDALIGN ); + doff = ((unsigned long )frame % bus->head_align);if (doff) { frame -= doff; len += doff; msglen += doff;memset (frame,0 , doff + bus->tx_hdrlen); } -/* precondition: doff < BRCMF_SDALIGN */ +/* precondition: doff < bus->head_align */ doff += bus->tx_hdrlen;/* Round send length to next SDIO block */
@@ -2778,15 +2774,11 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) pad = bus->blocksize - (len % bus->blocksize);if ((pad > bus->roundup) || (pad >= bus->blocksize)) pad =0 ; - }else if (len %BRCMF_SDALIGN ) { - pad =BRCMF_SDALIGN - (len %BRCMF_SDALIGN ); + }else if (len % bus->head_align) { + pad = bus->head_align - (len % bus->head_align); } len += pad; -/* Satisfy length-alignment requirements */ -if (len & (ALIGNMENT -1 )) - len =roundup (len,ALIGNMENT ); -/* precondition: IS_ALIGNED((unsigned long)frame, 2) */ /* Make sure backplane clock is on */
@@ -2798,10 +2790,8 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) hd_info.channel =SDPCM_CONTROL_CHANNEL ; hd_info.dat_offset = doff; hd_info.seq_num = bus->tx_seq; -if (bus->txglom) { - hd_info.lastfrm = true; - hd_info.tail_pad = pad; - } + hd_info.lastfrm = true; + hd_info.tail_pad = pad;brcmf_sdio_hdpack (bus, frame, &hd_info);if (bus->txglom)
@@ -3823,7 +3813,7 @@ static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)if (bus->sdiodev->bus_if->maxctl) { bus->rxblen =roundup ((bus->sdiodev->bus_if->maxctl +SDPCM_HDRLEN ), -ALIGNMENT ) +BRCMF_SDALIGN ; +ALIGNMENT ) + bus->head_align; bus->rxbuf =kmalloc (bus->rxblen,GFP_ATOMIC );if (!(bus->rxbuf))return false;
@@ -3924,9 +3914,13 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)brcmu_pktq_init (&bus->txq, (PRIOMASK +1 ),TXQLEN ); +/* allocate header buffer */ + bus->hdrbuf =kzalloc (MAX_HDR_READ + bus->head_align,GFP_KERNEL ); +if (!bus->hdrbuf) +return false;/* Locate an appropriately-aligned portion of hdrbuf */ bus->rxhdr = (u8 *)roundup ((unsigned long )&bus->hdrbuf[0 ], -BRCMF_SDALIGN ); + bus->head_align);/* Set the poll and/or interrupt flags */ bus->intr = true;
@@ -4047,7 +4041,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)brcmu_pkt_buf_free_skb (bus->txglom_sgpad);brcmf_sdbrcm_release_malloc (bus); - +kfree (bus->hdrbuf);kfree (bus); }
Signature · 1 line
1.7.10.4
PATCH 10/19 brcmfmac: remove redundant ioctl handlers
In reply to Arend van SprielThe ioctl() entry points were empty except for handling SIOC_ETHTOOL but that has been obsoleted in favor of struct ethtool_ops. Cleaning up removing the ioctl() handlers.
--- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 149 -------------------- 1 file changed, 149 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +0 -149
@@ -591,28 +591,6 @@ static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)return &ifp->stats; } -/* -* Set current toe component enables in toe_ol iovar, -* and set toe global enable iovar -*/ -static int brcmf_toe_set (struct brcmf_if *ifp,u32 toe_ol) -{ -s32 err; - - err =brcmf_fil_iovar_int_set (ifp,"toe_ol" , toe_ol); -if (err <0 ) { -brcmf_err ("Setting toe_ol failed, %d\n" , err); -return err; - } - - err =brcmf_fil_iovar_int_set (ifp,"toe" , (toe_ol !=0 )); -if (err <0 ) -brcmf_err ("Setting toe failed, %d\n" , err); - -return err; - -} -static void brcmf_ethtool_get_drvinfo (struct net_device *ndev,struct ethtool_drvinfo *info) {
@@ -630,124 +608,6 @@ static const struct ethtool_ops brcmf_ethtool_ops = { .get_drvinfo = brcmf_ethtool_get_drvinfo, }; -static int brcmf_ethtool (struct brcmf_if *ifp,void __user *uaddr) -{ -struct brcmf_pub *drvr = ifp->drvr; -struct ethtool_drvinfo info; -char drvname[sizeof (info.driver)]; -u32 cmd; -struct ethtool_value edata; -u32 toe_cmpnt, csum_dir; -int ret; - -brcmf_dbg (TRACE ,"Enter, idx=%d\n" , ifp->bssidx); - -/* all ethtool calls start with a cmd word */ -if (copy_from_user (&cmd, uaddr,sizeof (u32))) -return -EFAULT ; - -switch (cmd) { -case ETHTOOL_GDRVINFO : -/* Copy out any request driver name */ -if (copy_from_user (&info, uaddr,sizeof (info))) -return -EFAULT ; -strncpy (drvname, info.driver,sizeof (info.driver)); - drvname[sizeof (info.driver) -1 ] ='\0' ; - -/* clear struct for return */ -memset (&info,0 ,sizeof (info)); - info.cmd = cmd; - -/* if requested, identify ourselves */ -if (strcmp (drvname,"?dhd" ) ==0 ) { -sprintf (info.driver,"dhd" ); -strcpy (info.version,BRCMF_VERSION_STR ); - } -/* report dongle driver type */ -else -sprintf (info.driver,"wl" ); - -sprintf (info.version,"%lu" , drvr->drv_version); -if (copy_to_user (uaddr, &info,sizeof (info))) -return -EFAULT ; -brcmf_dbg (TRACE ,"given %*s, returning %s\n" , - (int )sizeof (drvname), drvname, info.driver); -break ; - -/* Get toe offload components from dongle */ -case ETHTOOL_GRXCSUM : -case ETHTOOL_GTXCSUM : - ret =brcmf_fil_iovar_int_get (ifp,"toe_ol" , &toe_cmpnt); -if (ret <0 ) -return ret; - - csum_dir = - (cmd ==ETHTOOL_GTXCSUM ) ?TOE_TX_CSUM_OL :TOE_RX_CSUM_OL ; - - edata.cmd = cmd; - edata.data = (toe_cmpnt & csum_dir) ?1 :0 ; - -if (copy_to_user (uaddr, &edata,sizeof (edata))) -return -EFAULT ; -break ; - -/* Set toe offload components in dongle */ -case ETHTOOL_SRXCSUM : -case ETHTOOL_STXCSUM : -if (copy_from_user (&edata, uaddr,sizeof (edata))) -return -EFAULT ; - -/* Read the current settings, update and write back */ - ret =brcmf_fil_iovar_int_get (ifp,"toe_ol" , &toe_cmpnt); -if (ret <0 ) -return ret; - - csum_dir = - (cmd ==ETHTOOL_STXCSUM ) ?TOE_TX_CSUM_OL :TOE_RX_CSUM_OL ; - -if (edata.data !=0 ) - toe_cmpnt |= csum_dir; -else - toe_cmpnt &= ~csum_dir; - - ret =brcmf_toe_set (ifp, toe_cmpnt); -if (ret <0 ) -return ret; - -/* If setting TX checksum mode, tell Linux the new mode */ -if (cmd ==ETHTOOL_STXCSUM ) { -if (edata.data) - ifp->ndev->features |=NETIF_F_IP_CSUM ; -else - ifp->ndev->features &= ~NETIF_F_IP_CSUM ; - } - -break ; - -default : -return -EOPNOTSUPP ; - } - -return 0 ; -} - -static int brcmf_netdev_ioctl_entry (struct net_device *ndev,struct ifreq *ifr, -int cmd) -{ -struct brcmf_if *ifp =netdev_priv (ndev); -struct brcmf_pub *drvr = ifp->drvr; - -brcmf_dbg (TRACE ,"Enter, idx=%d, cmd=0x%04x\n" , ifp->bssidx, cmd); - -if (!drvr->iflist[ifp->bssidx]) -return -1 ; - -if (cmd ==SIOCETHTOOL ) -return brcmf_ethtool (ifp, ifr->ifr_data); - -return -EOPNOTSUPP ; -} -static int brcmf_netdev_stop (struct net_device *ndev) {struct brcmf_if *ifp =netdev_priv (ndev);
@@ -800,7 +660,6 @@ static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_open = brcmf_netdev_open, .ndo_stop = brcmf_netdev_stop, .ndo_get_stats = brcmf_netdev_get_stats, - .ndo_do_ioctl = brcmf_netdev_ioctl_entry, .ndo_start_xmit = brcmf_netdev_start_xmit, .ndo_set_mac_address = brcmf_netdev_set_mac_address, .ndo_set_rx_mode = brcmf_netdev_set_multicast_list
@@ -866,13 +725,6 @@ static int brcmf_net_p2p_stop(struct net_device *ndev)return brcmf_cfg80211_down (ndev); } -static int brcmf_net_p2p_do_ioctl (struct net_device *ndev, -struct ifreq *ifr,int cmd) -{ -brcmf_dbg (TRACE ,"Enter\n" ); -return 0 ; -} -static netdev_tx_t brcmf_net_p2p_start_xmit (struct sk_buff *skb,struct net_device *ndev) {
@@ -885,7 +737,6 @@ static netdev_tx_t brcmf_net_p2p_start_xmit(struct sk_buff *skb,static const struct net_device_ops brcmf_netdev_ops_p2p = { .ndo_open = brcmf_net_p2p_open, .ndo_stop = brcmf_net_p2p_stop, - .ndo_do_ioctl = brcmf_net_p2p_do_ioctl, .ndo_start_xmit = brcmf_net_p2p_start_xmit };
Signature · 1 line
1.7.10.4
PATCH 11/19 brcmfmac: Dynamically register a protocol layer.
In reply to Arend van SprielFrom: Hante Meuleman <[email protected]>
BCDC is the default protocol layer and being called directly. This patch installs the functions for this layer dynamically. This allows new protocols to be added and selected dynamically depending on the hw capabilties. As currently only BCDC is supported this is always the installed protocol.
--- drivers/net/wireless/brcm80211/brcmfmac/Makefile | 1 + drivers/net/wireless/brcm80211/brcmfmac/bcdc.c | 93 +++++++++++--------- drivers/net/wireless/brcm80211/brcmfmac/bcdc.h | 24 +++++ drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 24 +---- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 +- drivers/net/wireless/brcm80211/brcmfmac/fwil.c | 7 +- drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 1 + drivers/net/wireless/brcm80211/brcmfmac/proto.c | 62 +++++++++++++ drivers/net/wireless/brcm80211/brcmfmac/proto.h | 57 ++++++++++++ 9 files changed, 202 insertions(+), 71 deletions(-) create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/bcdc.h create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/proto.c create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/proto.h
drivers/net/wireless/brcm80211/brcmfmac/Makefile +1 -0
@@ -28,6 +28,7 @@ brcmfmac-objs += \ fweh.o \ fwsignal.o \ p2p.o \ + proto.o \ bcdc.o \ dhd_common.o \ dhd_linux.o \
drivers/net/wireless/brcm80211/brcmfmac/bcdc.c +51 -42
223 lines not on this page · raw message
drivers/net/wireless/brcm80211/brcmfmac/bcdc.h new file +24 -0
@@ -0,0 +1,24 @@ +/* +* Copyright (c) 2013 Broadcom Corporation +* +* Permission to use, copy, modify, and/or distribute this software for any +* purpose with or without fee is hereby granted, provided that the above +* copyright notice and this permission notice appear in all copies. +* +* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +*/ +#ifndef BRCMFMAC_BCDC_H +#define BRCMFMAC_BCDC_H + + +int brcmf_proto_bcdc_attach (struct brcmf_pub *drvr); +void brcmf_proto_bcdc_detach (struct brcmf_pub *drvr); + + +#endif /* BRCMFMAC_BCDC_H */
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +1 -23
@@ -535,7 +535,7 @@ struct brcmf_fws_info; /* firmware signalling info */struct brcmf_pub {/* Linkage ponters */ struct brcmf_bus *bus_if; -struct brcmf_proto *prot; +struct brcmf_proto *proto;struct brcmf_cfg80211_info *config;/* Internal brcmf items */
@@ -635,28 +635,6 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev);/* Return pointer to interface name */ char *brcmf_ifname (struct brcmf_pub *drvr,int idx); -/* Linkage, sets prot link and updates hdrlen in pub */ -int brcmf_proto_attach (struct brcmf_pub *drvr); - -/* Unlink, frees allocated protocol memory (including brcmf_proto) */ -void brcmf_proto_detach (struct brcmf_pub *drvr); - -/* Add any protocol-specific data header. -* Caller must reserve prot_hdrlen prepend space. -*/ -void brcmf_proto_hdrpush (struct brcmf_pub *,int ifidx,u8 offset, -struct sk_buff *txp); - -/* Query dongle */ -int brcmf_proto_cdc_query_dcmd (struct brcmf_pub *drvr,int ifidx,uint cmd, -void *buf,uint len); -int brcmf_proto_cdc_set_dcmd (struct brcmf_pub *drvr,int ifidx,uint cmd, -void *buf,uint len); - -/* Remove any protocol-specific data header. */ -int brcmf_proto_hdrpull (struct brcmf_pub *drvr,bool do_fws,u8 *ifidx, -struct sk_buff *rxp); -int brcmf_net_attach (struct brcmf_if *ifp,bool rtnl_locked);struct brcmf_if *brcmf_add_if (struct brcmf_pub *drvr,s32 bssidx,s32 ifidx,char *name,u8 *mac_addr);
drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +2 -2
@@ -30,6 +30,7 @@#include "wl_cfg80211.h" #include "fwil.h" #include "fwsignal.h" +#include "proto.h" MODULE_AUTHOR ("Broadcom Corporation" );MODULE_DESCRIPTION ("Broadcom 802.11 wireless LAN fullmac driver." );
@@ -1040,8 +1041,7 @@ void brcmf_detach(struct device *dev)brcmf_bus_detach (drvr); -if (drvr->prot) -brcmf_proto_detach (drvr); +brcmf_proto_detach (drvr);brcmf_fws_deinit (drvr);
drivers/net/wireless/brcm80211/brcmfmac/fwil.c +3 -4
@@ -27,6 +27,7 @@#include "dhd_dbg.h" #include "tracepoint.h" #include "fwil.h" +#include "proto.h" #define MAX_HEX_DUMP_LEN 64
@@ -46,11 +47,9 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp, u32 cmd, void *data, u32 len, bool set)if (data !=NULL ) len =min_t (uint, len,BRCMF_DCMD_MAXLEN );if (set) - err =brcmf_proto_cdc_set_dcmd (drvr, ifp->ifidx, cmd, data, - len); + err =brcmf_proto_set_dcmd (drvr, ifp->ifidx, cmd, data, len);else - err =brcmf_proto_cdc_query_dcmd (drvr, ifp->ifidx, cmd, data, - len); + err =brcmf_proto_query_dcmd (drvr, ifp->ifidx, cmd, data, len);if (err >=0 ) err =0 ;
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +1 -0
@@ -35,6 +35,7 @@#include "fwsignal.h" #include "p2p.h" #include "wl_cfg80211.h" +#include "proto.h" /** * DOC: Firmware Signalling
drivers/net/wireless/brcm80211/brcmfmac/proto.c new file +62 -0
62 lines not on this page · raw message
drivers/net/wireless/brcm80211/brcmfmac/proto.h new file +57 -0
57 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 12/19 brcmfmac: provide firmware version in ethtool driver info
In reply to Arend van SprielKnowing the firmware version is pretty useful information when looking at issues. It is retrieved during initialization so store it in driver data structure to fill the ethtool driver info when requested.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 7 ++++++- drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c | 5 +++++ drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 ++-- 3 files changed, 13 insertions(+), 3 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +6 -1
@@ -211,6 +211,11 @@#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256 +/* Length of firmware version string stored for +* ethtool driver info which uses 32 bytes as well. +*/ +#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32 +/* Pattern matching filter. Specifies an offset within received packets to * start matching, the pattern to match, the size of the pattern, and a bitmask * that indicates which bits within the pattern should be matched.
@@ -544,7 +549,7 @@ struct brcmf_pub {u8 wme_dp;/* wme discard priority */ /* Dongle media info */ -unsigned long drv_version;/* Version of dongle-resident driver */ +char fwver[BRCMF_DRIVER_FIRMWARE_VERSION_LEN ];u8 mac[ETH_ALEN ];/* MAC address obtained from dongle */ /* Multicast data packets sent to dongle */
drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +5 -0
@@ -278,9 +278,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) } ptr = (char *)buf;strsep (&ptr,"\n" ); +/* Print fw version info */ brcmf_err ("Firmware version = %s\n" , buf); +/* locate firmware version number for ethtool */ + ptr =strrchr (buf,' ' ) +1 ; +strlcpy (ifp->drvr->fwver, ptr,sizeof (ifp->drvr->fwver)); +/* * Setup timeout if Beacons are lost and roam is off to report * link down
drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +2 -2
@@ -599,8 +599,8 @@ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,struct brcmf_pub *drvr = ifp->drvr;strlcpy (info->driver,KBUILD_MODNAME ,sizeof (info->driver)); -snprintf (info->version,sizeof (info->version),"%lu" , - drvr->drv_version); +snprintf (info->version,sizeof (info->version),"n/a" ); +strlcpy (info->fw_version, drvr->fwver,sizeof (info->fw_version));strlcpy (info->bus_info,dev_name (drvr->bus_if->dev),sizeof (info->bus_info)); }
Signature · 1 line
1.7.10.4
PATCH 13/19 brcmfmac: remove unnecessary EXPORT_SYMBOL() usage
In reply to Arend van SprielIn bcmsdh.c the functions brcmf_sdio_probe() and brcmf_sdio_remove() were exported, but that is not needed. The functions are linked into the driver module, which is the only one needing to call these.
--- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 3 --- 1 file changed, 3 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +0 -3
@@ -17,7 +17,6 @@#include <linux/types.h> #include <linux/netdevice.h> -#include <linux/export.h> #include <linux/pci.h> #include <linux/pci_ids.h> #include <linux/sched.h>
@@ -774,7 +773,6 @@ out:return ret; } -EXPORT_SYMBOL (brcmf_sdio_probe);int brcmf_sdio_remove (struct brcmf_sdio_dev *sdiodev) {
@@ -791,7 +789,6 @@ int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)return 0 ; } -EXPORT_SYMBOL (brcmf_sdio_remove);void brcmf_sdio_wdtmr_enable (struct brcmf_sdio_dev *sdiodev,bool enable) {
Signature · 1 line
1.7.10.4
PATCH 14/19 brcmfmac: move firmware related structures to fwil_types.h
In reply to Arend van SprielThe firmware control interface is provided by fwil source file, but a number of structures used to communicate with the firmware still resided in dhd.h. The patch moves them to fwil_types.h.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 306 -------------------- .../net/wireless/brcm80211/brcmfmac/dhd_common.c | 1 + .../net/wireless/brcm80211/brcmfmac/fwil_types.h | 304 +++++++++++++++++++ .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 10 +- 4 files changed, 310 insertions(+), 311 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +0 -306
@@ -100,31 +100,11 @@#define TOE_TX_CSUM_OL 0x00000001#define TOE_RX_CSUM_OL 0x00000002 -#define BRCMF_BSS_INFO_VERSION 109/* curr ver of brcmf_bss_info_le struct */ - -/* size of brcmf_scan_params not including variable length array */ -#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 - -/* masks for channel and ssid count */ -#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff -#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 - -/* primary (ie tx) key */ -#define BRCMF_PRIMARY_KEY (1 << 1) -/* For supporting multiple interfaces */ #define BRCMF_MAX_IFS 16 -#define DOT11_BSSTYPE_ANY 2#define DOT11_MAX_DEFAULT_KEYS 4 -#define BRCMF_ESCAN_REQ_VERSION 1 - -#define WLC_BSS_RSSI_ON_CHANNEL 0x0002 - -#define BRCMF_MAXRATES_IN_SET 16/* max # of rates in rateset */ -#define BRCMF_STA_ASSOC 0x10/* Associated */ -#define BRCMF_E_STATUS_SUCCESS 0#define BRCMF_E_STATUS_FAIL 1#define BRCMF_E_STATUS_TIMEOUT 2
@@ -216,292 +196,6 @@*/ #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32 -/* Pattern matching filter. Specifies an offset within received packets to -* start matching, the pattern to match, the size of the pattern, and a bitmask -* that indicates which bits within the pattern should be matched. -*/ -struct brcmf_pkt_filter_pattern_le { -/* -* Offset within received packet to start pattern matching. -* Offset '0' is the first byte of the ethernet header. -*/ -__le32 offset; -/* Size of the pattern. Bitmask must be the same size.*/ -__le32 size_bytes; -/* -* Variable length mask and pattern data. mask starts at offset 0. -* Pattern immediately follows mask. -*/ -u8 mask_and_pattern[1 ]; -}; - -/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ -struct brcmf_pkt_filter_le { -__le32 id;/* Unique filter id, specified by app. */ -__le32 type;/* Filter type (WL_PKT_FILTER_TYPE_xxx). */ -__le32 negate_match;/* Negate the result of filter matches */ -union {/* Filter definitions */ -struct brcmf_pkt_filter_pattern_le pattern;/* Filter pattern */ - } u; -}; - -/* IOVAR "pkt_filter_enable" parameter. */ -struct brcmf_pkt_filter_enable_le { -__le32 id;/* Unique filter id */ -__le32 enable;/* Enable/disable bool */ -}; - -/* BSS info structure -* Applications MUST CHECK ie_offset field and length field to access IEs and -* next bss_info structure in a vector (in struct brcmf_scan_results) -*/ -struct brcmf_bss_info_le { -__le32 version;/* version field */ -__le32 length;/* byte length of data in this record, -* starting at version and including IEs -*/ -u8 BSSID[ETH_ALEN ]; -__le16 beacon_period;/* units are Kusec */ -__le16 capability;/* Capability information */ -u8 SSID_len; -u8 SSID[32 ]; -struct { -__le32 count;/* # rates in this set */ -u8 rates[16 ];/* rates in 500kbps units w/hi bit set if basic */ - } rateset;/* supported rates */ -__le16 chanspec;/* chanspec for bss */ -__le16 atim_window;/* units are Kusec */ -u8 dtim_period;/* DTIM period */ -__le16 RSSI;/* receive signal strength (in dBm) */ -s8 phy_noise;/* noise (in dBm) */ - -u8 n_cap;/* BSS is 802.11N Capable */ -/* 802.11N BSS Capabilities (based on HT_CAP_*): */ -__le32 nbss_cap; -u8 ctl_ch;/* 802.11N BSS control channel number */ -__le32 reserved32[1 ];/* Reserved for expansion of BSS properties */ -u8 flags;/* flags */ -u8 reserved[3 ];/* Reserved for expansion of BSS properties */ -u8 basic_mcs[MCSSET_LEN ];/* 802.11N BSS required MCS set */ - -__le16 ie_offset;/* offset at which IEs start, from beginning */ -__le32 ie_length;/* byte length of Information Elements */ -__le16 SNR;/* average SNR of during frame reception */ -/* Add new fields here */ -/* variable length Information Elements */ -}; - -struct brcm_rateset_le { -/* # rates in this set */ -__le32 count; -/* rates in 500kbps units w/hi bit set if basic */ -u8 rates[BRCMF_MAXRATES_IN_SET ]; -}; - -struct brcmf_ssid { -u32 SSID_len; -unsigned char SSID[32 ]; -}; - -struct brcmf_ssid_le { -__le32 SSID_len; -unsigned char SSID[32 ]; -}; - -struct brcmf_scan_params_le { -struct brcmf_ssid_le ssid_le;/* default: {0, ""} */ -u8 bssid[ETH_ALEN ];/* default: bcast */ -s8 bss_type;/* default: any, -* DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT -*/ -u8 scan_type;/* flags, 0 use default */ -__le32 nprobes;/* -1 use default, number of probes per channel */ -__le32 active_time;/* -1 use default, dwell time per channel for -* active scanning -*/ -__le32 passive_time;/* -1 use default, dwell time per channel -* for passive scanning -*/ -__le32 home_time;/* -1 use default, dwell time for the -* home channel between channel scans -*/ -__le32 channel_num;/* count of channels and ssids that follow -* -* low half is count of channels in -* channel_list, 0 means default (use all -* available channels) -* -* high half is entries in struct brcmf_ssid -* array that follows channel_list, aligned for -* s32 (4 bytes) meaning an odd channel count -* implies a 2-byte pad between end of -* channel_list and first ssid -* -* if ssid count is zero, single ssid in the -* fixed parameter portion is assumed, otherwise -* ssid in the fixed portion is ignored -*/ -__le16 channel_list[1 ];/* list of chanspecs */ -}; - -struct brcmf_scan_results { -u32 buflen; -u32 version; -u32 count; -struct brcmf_bss_info_le bss_info_le[]; -}; - -struct brcmf_escan_params_le { -__le32 version; -__le16 action; -__le16 sync_id; -struct brcmf_scan_params_le params_le; -}; - -struct brcmf_escan_result_le { -__le32 buflen; -__le32 version; -__le16 sync_id; -__le16 bss_count; -struct brcmf_bss_info_le bss_info_le; -}; - -#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ - sizeof(struct brcmf_bss_info_le)) - -/* used for association with a specific BSSID and chanspec list */ -struct brcmf_assoc_params_le { -/* 00:00:00:00:00:00: broadcast scan */ -u8 bssid[ETH_ALEN ]; -/* 0: all available channels, otherwise count of chanspecs in -* chanspec_list */ -__le32 chanspec_num; -/* list of chanspecs */ -__le16 chanspec_list[1 ]; -}; - -/* used for join with or without a specific bssid and channel list */ -struct brcmf_join_params { -struct brcmf_ssid_le ssid_le; -struct brcmf_assoc_params_le params_le; -}; - -/* scan params for extended join */ -struct brcmf_join_scan_params_le { -u8 scan_type;/* 0 use default, active or passive scan */ -__le32 nprobes;/* -1 use default, nr of probes per channel */ -__le32 active_time;/* -1 use default, dwell time per channel for -* active scanning -*/ -__le32 passive_time;/* -1 use default, dwell time per channel -* for passive scanning -*/ -__le32 home_time;/* -1 use default, dwell time for the home -* channel between channel scans -*/ -}; - -/* extended join params */ -struct brcmf_ext_join_params_le { -struct brcmf_ssid_le ssid_le;/* {0, ""}: wildcard scan */ -struct brcmf_join_scan_params_le scan_le; -struct brcmf_assoc_params_le assoc_le; -}; - -struct brcmf_wsec_key { -u32 index;/* key index */ -u32 len;/* key length */ -u8 data[WLAN_MAX_KEY_LEN ];/* key data */ -u32 pad_1[18 ]; -u32 algo;/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ -u32 flags;/* misc flags */ -u32 pad_2[3 ]; -u32 iv_initialized;/* has IV been initialized already? */ -u32 pad_3; -/* Rx IV */ -struct { -u32 hi;/* upper 32 bits of IV */ -u16 lo;/* lower 16 bits of IV */ - } rxiv; -u32 pad_4[2 ]; -u8 ea[ETH_ALEN ];/* per station */ -}; - -/* -* dongle requires same struct as above but with fields in little endian order -*/ -struct brcmf_wsec_key_le { -__le32 index;/* key index */ -__le32 len;/* key length */ -u8 data[WLAN_MAX_KEY_LEN ];/* key data */ -__le32 pad_1[18 ]; -__le32 algo;/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ -__le32 flags;/* misc flags */ -__le32 pad_2[3 ]; -__le32 iv_initialized;/* has IV been initialized already? */ -__le32 pad_3; -/* Rx IV */ -struct { -__le32 hi;/* upper 32 bits of IV */ -__le16 lo;/* lower 16 bits of IV */ - } rxiv; -__le32 pad_4[2 ]; -u8 ea[ETH_ALEN ];/* per station */ -}; - -/* Used to get specific STA parameters */ -struct brcmf_scb_val_le { -__le32 val; -u8 ea[ETH_ALEN ]; -}; - -/* channel encoding */ -struct brcmf_channel_info_le { -__le32 hw_channel; -__le32 target_channel; -__le32 scan_channel; -}; - -struct brcmf_sta_info_le { -__le16 ver;/* version of this struct */ -__le16 len;/* length in bytes of this structure */ -__le16 cap;/* sta's advertised capabilities */ -__le32 flags;/* flags defined below */ -__le32 idle;/* time since data pkt rx'd from sta */ -u8 ea[ETH_ALEN ];/* Station address */ -__le32 count;/* # rates in this set */ -u8 rates[BRCMF_MAXRATES_IN_SET ];/* rates in 500kbps units */ -/* w/hi bit set if basic */ -__le32 in;/* seconds elapsed since associated */ -__le32 listen_interval_inms;/* Min Listen interval in ms for STA */ -__le32 tx_pkts;/* # of packets transmitted */ -__le32 tx_failures;/* # of packets failed */ -__le32 rx_ucast_pkts;/* # of unicast packets received */ -__le32 rx_mcast_pkts;/* # of multicast packets received */ -__le32 tx_rate;/* Rate of last successful tx frame */ -__le32 rx_rate;/* Rate of last successful rx frame */ -__le32 rx_decrypt_succeeds;/* # of packet decrypted successfully */ -__le32 rx_decrypt_failures;/* # of packet decrypted failed */ -}; - -struct brcmf_chanspec_list { -__le32 count;/* # of entries */ -__le32 element[1 ];/* variable length uint32 list */ -}; - -/* -* WLC_E_PROBRESP_MSG -* WLC_E_P2P_PROBREQ_MSG -* WLC_E_ACTION_FRAME_RX -*/ -struct brcmf_rx_mgmt_data { -__be16 version; -__be16 chanspec; -__be32 rssi; -__be32 mactime; -__be32 rate; -}; -/* Bus independent dongle command */ struct brcmf_dcmd {uint cmd;/* common dongle cmd definition */
drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +1 -0
@@ -23,6 +23,7 @@#include "dhd_bus.h" #include "dhd_dbg.h" #include "fwil.h" +#include "fwil_types.h" #include "tracepoint.h" #define PKTFILTER_BUF_SIZE 128
drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +304 -0
314 lines not on this page · raw message
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +5 -5
@@ -2556,8 +2556,8 @@ brcmf_compare_update_same_bss(struct brcmf_cfg80211_info *cfg, ch_bss.band == ch_bss_info_le.band && bss_info_le->SSID_len == bss->SSID_len && !memcmp(bss_info_le->SSID, bss->SSID, bss_info_le->SSID_len)) { - if ((bss->flags & WLC_BSS_RSSI_ON_CHANNEL) == - (bss_info_le->flags & WLC_BSS_RSSI_ON_CHANNEL)) { + if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == + (bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL)) {s16 bss_rssi =le16_to_cpu (bss->RSSI);s16 bss_info_rssi =le16_to_cpu (bss_info_le->RSSI);
@@ -2566,13 +2566,13 @@ brcmf_compare_update_same_bss(struct brcmf_cfg80211_info *cfg,*/ if (bss_info_rssi > bss_rssi) bss->RSSI = bss_info_le->RSSI; - }else if ((bss->flags &WLC_BSS_RSSI_ON_CHANNEL ) && - (bss_info_le->flags &WLC_BSS_RSSI_ON_CHANNEL ) ==0 ) { + }else if ((bss->flags &BRCMF_BSS_RSSI_ON_CHANNEL ) && + (bss_info_le->flags &BRCMF_BSS_RSSI_ON_CHANNEL ) ==0 ) {/* preserve the on-channel rssi measurement * if the new measurement is off channel */ bss->RSSI = bss_info_le->RSSI; - bss->flags |=WLC_BSS_RSSI_ON_CHANNEL ; + bss->flags |=BRCMF_BSS_RSSI_ON_CHANNEL ; }return 1 ; }
Signature · 1 line
1.7.10.4
PATCH 15/19 brcmfmac: move firmware command code definitions
In reply to Arend van SprielMove the command codes to the firmware interface module as that makes a bit more sense.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 61 ------------------------ drivers/net/wireless/brcm80211/brcmfmac/fwil.h | 61 ++++++++++++++++++++++++ 2 files changed, 61 insertions(+), 61 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +0 -61
@@ -25,67 +25,6 @@#include "fweh.h" -/******************************************************************************* -* IO codes that are interpreted by dongle firmware -******************************************************************************/ -#define BRCMF_C_GET_VERSION 1 -#define BRCMF_C_UP 2 -#define BRCMF_C_DOWN 3 -#define BRCMF_C_SET_PROMISC 10 -#define BRCMF_C_GET_RATE 12 -#define BRCMF_C_GET_INFRA 19 -#define BRCMF_C_SET_INFRA 20 -#define BRCMF_C_GET_AUTH 21 -#define BRCMF_C_SET_AUTH 22 -#define BRCMF_C_GET_BSSID 23 -#define BRCMF_C_GET_SSID 25 -#define BRCMF_C_SET_SSID 26 -#define BRCMF_C_TERMINATED 28 -#define BRCMF_C_GET_CHANNEL 29 -#define BRCMF_C_SET_CHANNEL 30 -#define BRCMF_C_GET_SRL 31 -#define BRCMF_C_SET_SRL 32 -#define BRCMF_C_GET_LRL 33 -#define BRCMF_C_SET_LRL 34 -#define BRCMF_C_GET_RADIO 37 -#define BRCMF_C_SET_RADIO 38 -#define BRCMF_C_GET_PHYTYPE 39 -#define BRCMF_C_SET_KEY 45 -#define BRCMF_C_SET_PASSIVE_SCAN 49 -#define BRCMF_C_SCAN 50 -#define BRCMF_C_SCAN_RESULTS 51 -#define BRCMF_C_DISASSOC 52 -#define BRCMF_C_REASSOC 53 -#define BRCMF_C_SET_ROAM_TRIGGER 55 -#define BRCMF_C_SET_ROAM_DELTA 57 -#define BRCMF_C_GET_BCNPRD 75 -#define BRCMF_C_SET_BCNPRD 76 -#define BRCMF_C_GET_DTIMPRD 77 -#define BRCMF_C_SET_DTIMPRD 78 -#define BRCMF_C_SET_COUNTRY 84 -#define BRCMF_C_GET_PM 85 -#define BRCMF_C_SET_PM 86 -#define BRCMF_C_GET_CURR_RATESET 114 -#define BRCMF_C_GET_AP 117 -#define BRCMF_C_SET_AP 118 -#define BRCMF_C_GET_RSSI 127 -#define BRCMF_C_GET_WSEC 133 -#define BRCMF_C_SET_WSEC 134 -#define BRCMF_C_GET_PHY_NOISE 135 -#define BRCMF_C_GET_BSS_INFO 136 -#define BRCMF_C_GET_BANDLIST 140 -#define BRCMF_C_SET_SCB_TIMEOUT 158 -#define BRCMF_C_GET_PHYLIST 180 -#define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 -#define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 -#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define BRCMF_C_GET_VALID_CHANNELS 217 -#define BRCMF_C_GET_KEY_PRIMARY 235 -#define BRCMF_C_SET_KEY_PRIMARY 236 -#define BRCMF_C_SET_SCAN_PASSIVE_TIME 258 -#define BRCMF_C_GET_VAR 262 -#define BRCMF_C_SET_VAR 263 -/* phy types (returned by WLC_GET_PHYTPE) */ #define WLC_PHY_TYPE_A 0#define WLC_PHY_TYPE_B 1
drivers/net/wireless/brcm80211/brcmfmac/fwil.h +61 -0
67 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 16/19 brcmfmac: Use consistent naming for BCDC.
In reply to Arend van SprielFrom: Hante Meuleman <[email protected]>
The BCDC protocol layer is using a mix of naming of CDC, BDC and BCDC. Use the name BCDC consistenly over all functions, defines and variables. This patch does not change code functionality.
--- drivers/net/wireless/brcm80211/brcmfmac/bcdc.c | 195 +++++++++----------- drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 2 +- .../net/wireless/brcm80211/brcmfmac/tracepoint.h | 4 +- 3 files changed, 95 insertions(+), 106 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/bcdc.c +92 -103
@@ -33,7 +33,7 @@#include "proto.h" #include "bcdc.h" -struct brcmf_proto_cdc_dcmd { +struct brcmf_proto_bcdc_dcmd {__le32 cmd;/* dongle command value */ __le32 len;/* lower 16: output buflen; * upper 16: input buflen (excludes header) */
@@ -42,47 +42,47 @@ struct brcmf_proto_cdc_dcmd { };/* Max valid buffer size that can be sent to the dongle */ -#define CDC_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN) - -/* CDC flag definitions */ -#define CDC_DCMD_ERROR 0x01/* 1=cmd failed */ -#define CDC_DCMD_SET 0x02/* 0=get, 1=set cmd */ -#define CDC_DCMD_IF_MASK 0xF000/* I/F index */ -#define CDC_DCMD_IF_SHIFT 12 -#define CDC_DCMD_ID_MASK 0xFFFF0000/* id an cmd pairing */ -#define CDC_DCMD_ID_SHIFT 16/* ID Mask shift bits */ -#define CDC_DCMD_ID (flags) \ - (((flags) & CDC_DCMD_ID_MASK) >> CDC_DCMD_ID_SHIFT) +#define BCDC_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN) + +/* BCDC flag definitions */ +#define BCDC_DCMD_ERROR 0x01/* 1=cmd failed */ +#define BCDC_DCMD_SET 0x02/* 0=get, 1=set cmd */ +#define BCDC_DCMD_IF_MASK 0xF000/* I/F index */ +#define BCDC_DCMD_IF_SHIFT 12 +#define BCDC_DCMD_ID_MASK 0xFFFF0000/* id an cmd pairing */ +#define BCDC_DCMD_ID_SHIFT 16/* ID Mask shift bits */ +#define BCDC_DCMD_ID (flags) \ + (((flags) & BCDC_DCMD_ID_MASK) >> BCDC_DCMD_ID_SHIFT)/* -* BDC header - Broadcom specific extension of CDC. +* BCDC header - Broadcom specific extension of CDC. * Used on data packets to convey priority across USB. */ -#define BDC_HEADER_LEN 4 -#define BDC_PROTO_VER 2/* Protocol version */ -#define BDC_FLAG_VER_MASK 0xf0/* Protocol version mask */ -#define BDC_FLAG_VER_SHIFT 4/* Protocol version shift */ -#define BDC_FLAG_SUM_GOOD 0x04/* Good RX checksums */ -#define BDC_FLAG_SUM_NEEDED 0x08/* Dongle needs to do TX checksums */ -#define BDC_PRIORITY_MASK 0x7 -#define BDC_FLAG2_IF_MASK 0x0f/* packet rx interface in APSTA */ -#define BDC_FLAG2_IF_SHIFT 0 - -#define BDC_GET_IF_IDX (hdr) \ - ((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT)) -#define BDC_SET_IF_IDX (hdr, idx) \ - ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | \ - ((idx) << BDC_FLAG2_IF_SHIFT))) +#define BCDC_HEADER_LEN 4 +#define BCDC_PROTO_VER 2/* Protocol version */ +#define BCDC_FLAG_VER_MASK 0xf0/* Protocol version mask */ +#define BCDC_FLAG_VER_SHIFT 4/* Protocol version shift */ +#define BCDC_FLAG_SUM_GOOD 0x04/* Good RX checksums */ +#define BCDC_FLAG_SUM_NEEDED 0x08/* Dongle needs to do TX checksums */ +#define BCDC_PRIORITY_MASK 0x7 +#define BCDC_FLAG2_IF_MASK 0x0f/* packet rx interface in APSTA */ +#define BCDC_FLAG2_IF_SHIFT 0 + +#define BCDC_GET_IF_IDX (hdr) \ + ((int)((((hdr)->flags2) & BCDC_FLAG2_IF_MASK) >> BCDC_FLAG2_IF_SHIFT)) +#define BCDC_SET_IF_IDX (hdr, idx) \ + ((hdr)->flags2 = (((hdr)->flags2 & ~BCDC_FLAG2_IF_MASK) | \ + ((idx) << BCDC_FLAG2_IF_SHIFT)))/** -* struct brcmf_proto_bdc_header - BDC header format +* struct brcmf_proto_bcdc_header - BCDC header format * * @flags: flags contain protocol and checksum info. * @priority: 802.1d priority and USB flow control info (bit 4:7). * @flags2: additional flags containing dongle interface index. * @data_offset: start of packet data. header is following by firmware signals. */ -struct brcmf_proto_bdc_header { +struct brcmf_proto_bcdc_header {u8 flags;u8 priority;u8 flags2;
@@ -91,7 +91,7 @@ struct brcmf_proto_bdc_header {/* * maximum length of firmware signal data between -* the BDC header and packet data in the tx path. +* the BCDC header and packet data in the tx path. */ #define BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES 12
@@ -109,42 +109,42 @@ struct brcmf_proto_bdc_header {struct brcmf_bcdc {u16 reqid;u8 bus_header[BUS_HEADER_LEN ]; -struct brcmf_proto_cdc_dcmd msg; +struct brcmf_proto_bcdc_dcmd msg;unsigned char buf[BRCMF_DCMD_MAXLEN +ROUND_UP_MARGIN ]; }; -static int brcmf_proto_cdc_msg (struct brcmf_pub *drvr) +static int brcmf_proto_bcdc_msg (struct brcmf_pub *drvr) {struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd;int len =le32_to_cpu (bcdc->msg.len) + -sizeof (struct brcmf_proto_cdc_dcmd ); +sizeof (struct brcmf_proto_bcdc_dcmd ); -brcmf_dbg (CDC ,"Enter\n" ); +brcmf_dbg (BCDC ,"Enter\n" ); -/* NOTE : cdc->msg.len holds the desired length of the buffer to be -* returned. Only up to CDC_MAX_MSG_SIZE of this buffer area +/* NOTE : bcdc->msg.len holds the desired length of the buffer to be +* returned. Only up to BCDC_MAX_MSG_SIZE of this buffer area * is actually sent to the dongle */ -if (len >CDC_MAX_MSG_SIZE ) - len =CDC_MAX_MSG_SIZE ; +if (len >BCDC_MAX_MSG_SIZE ) + len =BCDC_MAX_MSG_SIZE ;/* Send request */ return brcmf_bus_txctl (drvr->bus_if, (unsigned char *)&bcdc->msg, len); } -static int brcmf_proto_cdc_cmplt (struct brcmf_pub *drvr,u32 id,u32 len) +static int brcmf_proto_bcdc_cmplt (struct brcmf_pub *drvr,u32 id,u32 len) {int ret;struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; -brcmf_dbg (CDC ,"Enter\n" ); - len +=sizeof (struct brcmf_proto_cdc_dcmd ); +brcmf_dbg (BCDC ,"Enter\n" ); + len +=sizeof (struct brcmf_proto_bcdc_dcmd );do { ret =brcmf_bus_rxctl (drvr->bus_if, (unsigned char *)&bcdc->msg, len);if (ret <0 )break ; - }while (CDC_DCMD_ID (le32_to_cpu (bcdc->msg.flags)) != id); + }while (BCDC_DCMD_ID (le32_to_cpu (bcdc->msg.flags)) != id);return ret; }
@@ -154,40 +154,40 @@ brcmf_proto_bcdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, uint len) {struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; -struct brcmf_proto_cdc_dcmd *msg = &bcdc->msg; +struct brcmf_proto_bcdc_dcmd *msg = &bcdc->msg;void *info;int ret =0 , retries =0 ;u32 id, flags; -brcmf_dbg (CDC ,"Enter, cmd %d len %d\n" , cmd, len); +brcmf_dbg (BCDC ,"Enter, cmd %d len %d\n" , cmd, len); -memset (msg,0 ,sizeof (struct brcmf_proto_cdc_dcmd )); +memset (msg,0 ,sizeof (struct brcmf_proto_bcdc_dcmd )); msg->cmd =cpu_to_le32 (cmd); msg->len =cpu_to_le32 (len); - flags = (++bcdc->reqid <<CDC_DCMD_ID_SHIFT ); - flags = (flags & ~CDC_DCMD_IF_MASK ) | - (ifidx <<CDC_DCMD_IF_SHIFT ); + flags = (++bcdc->reqid <<BCDC_DCMD_ID_SHIFT ); + flags = (flags & ~BCDC_DCMD_IF_MASK ) | + (ifidx <<BCDC_DCMD_IF_SHIFT ); msg->flags =cpu_to_le32 (flags);if (buf)memcpy (bcdc->buf, buf, len); - ret =brcmf_proto_cdc_msg (drvr); + ret =brcmf_proto_bcdc_msg (drvr);if (ret <0 ) { -brcmf_err ("brcmf_proto_cdc_msg failed w/status %d\n" , +brcmf_err ("brcmf_proto_bcdc_msg failed w/status %d\n" , ret); goto done; } retry:/* wait for interrupt and get first fragment */ - ret =brcmf_proto_cdc_cmplt (drvr, bcdc->reqid, len); + ret =brcmf_proto_bcdc_cmplt (drvr, bcdc->reqid, len);if (ret <0 ) goto done; flags =le32_to_cpu (msg->flags); - id = (flags &CDC_DCMD_ID_MASK ) >>CDC_DCMD_ID_SHIFT ; + id = (flags &BCDC_DCMD_ID_MASK ) >>BCDC_DCMD_ID_SHIFT ;if ((id < bcdc->reqid) && (++retries <RETRIES )) goto retry;
@@ -209,7 +209,7 @@ retry: }/* Check the ERROR flag */ -if (flags &CDC_DCMD_ERROR ) +if (flags &BCDC_DCMD_ERROR ) ret =le32_to_cpu (msg->status); done:
@@ -221,34 +221,34 @@ brcmf_proto_bcdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, uint len) {struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; -struct brcmf_proto_cdc_dcmd *msg = &bcdc->msg; +struct brcmf_proto_bcdc_dcmd *msg = &bcdc->msg;int ret =0 ;u32 flags, id; -brcmf_dbg (CDC ,"Enter, cmd %d len %d\n" , cmd, len); +brcmf_dbg (BCDC ,"Enter, cmd %d len %d\n" , cmd, len); -memset (msg,0 ,sizeof (struct brcmf_proto_cdc_dcmd )); +memset (msg,0 ,sizeof (struct brcmf_proto_bcdc_dcmd )); msg->cmd =cpu_to_le32 (cmd); msg->len =cpu_to_le32 (len); - flags = (++bcdc->reqid <<CDC_DCMD_ID_SHIFT ) |CDC_DCMD_SET ; - flags = (flags & ~CDC_DCMD_IF_MASK ) | - (ifidx <<CDC_DCMD_IF_SHIFT ); + flags = (++bcdc->reqid <<BCDC_DCMD_ID_SHIFT ) |BCDC_DCMD_SET ; + flags = (flags & ~BCDC_DCMD_IF_MASK ) | + (ifidx <<BCDC_DCMD_IF_SHIFT ); msg->flags =cpu_to_le32 (flags);if (buf)memcpy (bcdc->buf, buf, len); - ret =brcmf_proto_cdc_msg (drvr); + ret =brcmf_proto_bcdc_msg (drvr);if (ret <0 ) goto done; - ret =brcmf_proto_cdc_cmplt (drvr, bcdc->reqid, len); + ret =brcmf_proto_bcdc_cmplt (drvr, bcdc->reqid, len);if (ret <0 ) goto done; flags =le32_to_cpu (msg->flags); - id = (flags &CDC_DCMD_ID_MASK ) >>CDC_DCMD_ID_SHIFT ; + id = (flags &BCDC_DCMD_ID_MASK ) >>BCDC_DCMD_ID_SHIFT ;if (id != bcdc->reqid) { brcmf_err("%s: unexpected request id %d (expected %d)\n",
@@ -258,67 +258,56 @@ brcmf_proto_bcdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, }/* Check the ERROR flag */ -if (flags &CDC_DCMD_ERROR ) +if (flags &BCDC_DCMD_ERROR ) ret =le32_to_cpu (msg->status); done:return ret; } -static bool pkt_sum_needed (struct sk_buff *skb) -{ -return skb->ip_summed ==CHECKSUM_PARTIAL ; -} - -static void pkt_set_sum_good (struct sk_buff *skb,bool x) -{ - skb->ip_summed = (x ?CHECKSUM_UNNECESSARY :CHECKSUM_NONE ); -} -static void brcmf_proto_bcdc_hdrpush (struct brcmf_pub *drvr,int ifidx,u8 offset,struct sk_buff *pktbuf) { -struct brcmf_proto_bdc_header *h; +struct brcmf_proto_bcdc_header *h; -brcmf_dbg (CDC ,"Enter\n" ); +brcmf_dbg (BCDC ,"Enter\n" );/* Push BDC header used to convey priority for buses that don't */ -skb_push (pktbuf,BDC_HEADER_LEN ); +skb_push (pktbuf,BCDC_HEADER_LEN ); - h = (struct brcmf_proto_bdc_header *)(pktbuf->data); + h = (struct brcmf_proto_bcdc_header *)(pktbuf->data); - h->flags = (BDC_PROTO_VER <<BDC_FLAG_VER_SHIFT ); -if (pkt_sum_needed (pktbuf)) - h->flags |=BDC_FLAG_SUM_NEEDED ; + h->flags = (BCDC_PROTO_VER <<BCDC_FLAG_VER_SHIFT ); +if (pktbuf->ip_summed ==CHECKSUM_PARTIAL ) + h->flags |=BCDC_FLAG_SUM_NEEDED ; - h->priority = (pktbuf->priority &BDC_PRIORITY_MASK ); + h->priority = (pktbuf->priority &BCDC_PRIORITY_MASK ); h->flags2 =0 ; h->data_offset = offset; -BDC_SET_IF_IDX (h, ifidx); -trace_brcmf_bdchdr (pktbuf->data); +BCDC_SET_IF_IDX (h, ifidx); +trace_brcmf_bcdchdr (pktbuf->data); }static int brcmf_proto_bcdc_hdrpull (struct brcmf_pub *drvr,bool do_fws,u8 *ifidx,struct sk_buff *pktbuf) { -struct brcmf_proto_bdc_header *h; - -brcmf_dbg (CDC ,"Enter\n" ); +struct brcmf_proto_bcdc_header *h; -/* Pop BDC header used to convey priority for buses that don't */ +brcmf_dbg (BCDC ,"Enter\n" ); -if (pktbuf->len <=BDC_HEADER_LEN ) { +/* Pop BCDC header used to convey priority for buses that don't */ +if (pktbuf->len <=BCDC_HEADER_LEN ) {brcmf_dbg (INFO ,"rx data too short (%d <= %d)\n" , - pktbuf->len,BDC_HEADER_LEN ); + pktbuf->len,BCDC_HEADER_LEN );return -EBADE ; } -trace_brcmf_bdchdr (pktbuf->data); - h = (struct brcmf_proto_bdc_header *)(pktbuf->data); +trace_brcmf_bcdchdr (pktbuf->data); + h = (struct brcmf_proto_bcdc_header *)(pktbuf->data); - *ifidx =BDC_GET_IF_IDX (h); + *ifidx =BCDC_GET_IF_IDX (h);if (*ifidx >=BRCMF_MAX_IFS ) {brcmf_err ("rx data ifnum out of range (%d)\n" , *ifidx);return -EBADE ;
@@ -332,22 +321,22 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,if (*ifidx) (*ifidx)++; -if (((h->flags &BDC_FLAG_VER_MASK ) >>BDC_FLAG_VER_SHIFT ) != -BDC_PROTO_VER ) { -brcmf_err ("%s: non-BDC packet received, flags 0x%x\n" , +if (((h->flags &BCDC_FLAG_VER_MASK ) >>BCDC_FLAG_VER_SHIFT ) != +BCDC_PROTO_VER ) { +brcmf_err ("%s: non-BCDC packet received, flags 0x%x\n" ,brcmf_ifname (drvr, *ifidx), h->flags);return -EBADE ; } -if (h->flags &BDC_FLAG_SUM_GOOD ) { -brcmf_dbg (CDC ,"%s: BDC rcv, good checksum, flags 0x%x\n" , +if (h->flags &BCDC_FLAG_SUM_GOOD ) { +brcmf_dbg (BCDC ,"%s: BDC rcv, good checksum, flags 0x%x\n" ,brcmf_ifname (drvr, *ifidx), h->flags); -pkt_set_sum_good (pktbuf, true); + pktbuf->ip_summed =CHECKSUM_UNNECESSARY ; } - pktbuf->priority = h->priority &BDC_PRIORITY_MASK ; + pktbuf->priority = h->priority &BCDC_PRIORITY_MASK ; -skb_pull (pktbuf,BDC_HEADER_LEN ); +skb_pull (pktbuf,BCDC_HEADER_LEN );if (do_fws)brcmf_fws_hdrpull (drvr, *ifidx, h->data_offset <<2 , pktbuf);else
@@ -378,9 +367,9 @@ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) drvr->proto->set_dcmd = brcmf_proto_bcdc_set_dcmd; drvr->proto->pd = bcdc; - drvr->hdrlen +=BDC_HEADER_LEN +BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES ; + drvr->hdrlen +=BCDC_HEADER_LEN +BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES ; drvr->bus_if->maxctl =BRCMF_DCMD_MAXLEN + -sizeof (struct brcmf_proto_cdc_dcmd ) +ROUND_UP_MARGIN ; +sizeof (struct brcmf_proto_bcdc_dcmd ) +ROUND_UP_MARGIN ;return 0 ; fail:
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +1 -1
@@ -33,7 +33,7 @@#define BRCMF_USB_VAL 0x00002000#define BRCMF_SCAN_VAL 0x00004000#define BRCMF_CONN_VAL 0x00008000 -#define BRCMF_CDC_VAL 0x00010000 +#define BRCMF_BCDC_VAL 0x00010000#define BRCMF_SDIO_VAL 0x00020000/* set default print format */
drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h +2 -2
@@ -89,7 +89,7 @@ TRACE_EVENT(brcmf_hexdump,TP_printk ("hexdump [addr=%lx, length=%lu]" , __entry->addr, __entry->len) ); -TRACE_EVENT(brcmf_bdchdr, +TRACE_EVENT(brcmf_bcdchdr, TP_PROTO(void *data), TP_ARGS(data), TP_STRUCT__entry(
@@ -107,7 +107,7 @@ TRACE_EVENT(brcmf_bdchdr,memcpy (__get_dynamic_array (signal), (u8 *)data +4 , __entry->siglen); ), -TP_printk ("bdc: prio=%d siglen=%d" , __entry->prio, __entry->siglen) +TP_printk ("bcdc: prio=%d siglen=%d" , __entry->prio, __entry->siglen) );#ifndef SDPCM_RX
Signature · 1 line
1.7.10.4
PATCH 17/19 brcmfmac: remove some unused definitions
In reply to Arend van SprielRemoving WLC_PHY_TYPE and some BRCMF_E_.* definitions as these are not used in the driver sources.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 48 ------------------------- 1 file changed, 48 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +0 -48
@@ -25,17 +25,6 @@#include "fweh.h" -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 -#define WLC_PHY_TYPE_SSN 6 -#define WLC_PHY_TYPE_HT 7 -#define WLC_PHY_TYPE_LCN 8 -#define WLC_PHY_TYPE_NULL 0xf -#define TOE_TX_CSUM_OL 0x00000001#define TOE_RX_CSUM_OL 0x00000002
@@ -75,38 +64,6 @@#define BRCMF_E_REASON_TSPEC_REJECTED 7#define BRCMF_E_REASON_BETTER_AP 8 -#define BRCMF_E_PRUNE_ENCR_MISMATCH 1 -#define BRCMF_E_PRUNE_BCAST_BSSID 2 -#define BRCMF_E_PRUNE_MAC_DENY 3 -#define BRCMF_E_PRUNE_MAC_NA 4 -#define BRCMF_E_PRUNE_REG_PASSV 5 -#define BRCMF_E_PRUNE_SPCT_MGMT 6 -#define BRCMF_E_PRUNE_RADAR 7 -#define BRCMF_E_RSN_MISMATCH 8 -#define BRCMF_E_PRUNE_NO_COMMON_RATES 9 -#define BRCMF_E_PRUNE_BASIC_RATES 10 -#define BRCMF_E_PRUNE_CIPHER_NA 12 -#define BRCMF_E_PRUNE_KNOWN_STA 13 -#define BRCMF_E_PRUNE_WDS_PEER 15 -#define BRCMF_E_PRUNE_QBSS_LOAD 16 -#define BRCMF_E_PRUNE_HOME_AP 17 - -#define BRCMF_E_SUP_OTHER 0 -#define BRCMF_E_SUP_DECRYPT_KEY_DATA 1 -#define BRCMF_E_SUP_BAD_UCAST_WEP128 2 -#define BRCMF_E_SUP_BAD_UCAST_WEP40 3 -#define BRCMF_E_SUP_UNSUP_KEY_LEN 4 -#define BRCMF_E_SUP_PW_KEY_CIPHER 5 -#define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6 -#define BRCMF_E_SUP_MSG3_IE_MISMATCH 7 -#define BRCMF_E_SUP_NO_INSTALL_FLAG 8 -#define BRCMF_E_SUP_MSG3_NO_GTK 9 -#define BRCMF_E_SUP_GRP_KEY_CIPHER 10 -#define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11 -#define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12 -#define BRCMF_E_SUP_SEND_FAIL 13 -#define BRCMF_E_SUP_DEAUTH 14 -#define BRCMF_E_IF_ADD 1#define BRCMF_E_IF_DEL 2#define BRCMF_E_IF_CHANGE 3
@@ -117,11 +74,6 @@#define BRCMF_E_IF_ROLE_AP 1#define BRCMF_E_IF_ROLE_WDS 2 -#define BRCMF_E_LINK_BCN_LOSS 1 -#define BRCMF_E_LINK_DISASSOC 2 -#define BRCMF_E_LINK_ASSOC_REC 3 -#define BRCMF_E_LINK_BSSCFG_DIS 4 -/* Small, medium and maximum buffer size for dcmd */ #define BRCMF_DCMD_SMLEN 256
Signature · 1 line
1.7.10.4
PATCH 18/19 brcmfmac: move firmware event related defines to fweh.h
In reply to Arend van SprielThe dhd.h file contained a number of definitions that are related to events received from the firmware. Those are processed and dispatched in the driver by fweh. Hence the definitions are moved to its include file.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 49 --------------------- drivers/net/wireless/brcm80211/brcmfmac/fweh.h | 54 ++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 49 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd.h +0 -49
@@ -33,47 +33,6 @@#define DOT11_MAX_DEFAULT_KEYS 4 -#define BRCMF_E_STATUS_SUCCESS 0 -#define BRCMF_E_STATUS_FAIL 1 -#define BRCMF_E_STATUS_TIMEOUT 2 -#define BRCMF_E_STATUS_NO_NETWORKS 3 -#define BRCMF_E_STATUS_ABORT 4 -#define BRCMF_E_STATUS_NO_ACK 5 -#define BRCMF_E_STATUS_UNSOLICITED 6 -#define BRCMF_E_STATUS_ATTEMPT 7 -#define BRCMF_E_STATUS_PARTIAL 8 -#define BRCMF_E_STATUS_NEWSCAN 9 -#define BRCMF_E_STATUS_NEWASSOC 10 -#define BRCMF_E_STATUS_11HQUIET 11 -#define BRCMF_E_STATUS_SUPPRESS 12 -#define BRCMF_E_STATUS_NOCHANS 13 -#define BRCMF_E_STATUS_CS_ABORT 15 -#define BRCMF_E_STATUS_ERROR 16 - -#define BRCMF_E_REASON_INITIAL_ASSOC 0 -#define BRCMF_E_REASON_LOW_RSSI 1 -#define BRCMF_E_REASON_DEAUTH 2 -#define BRCMF_E_REASON_DISASSOC 3 -#define BRCMF_E_REASON_BCNS_LOST 4 -#define BRCMF_E_REASON_MINTXRATE 9 -#define BRCMF_E_REASON_TXFAIL 10 - -#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 -#define BRCMF_E_REASON_FAST_ROAM_FAILED 5 -#define BRCMF_E_REASON_DIRECTED_ROAM 6 -#define BRCMF_E_REASON_TSPEC_REJECTED 7 -#define BRCMF_E_REASON_BETTER_AP 8 - -#define BRCMF_E_IF_ADD 1 -#define BRCMF_E_IF_DEL 2 -#define BRCMF_E_IF_CHANGE 3 - -#define BRCMF_E_IF_FLAG_NOIF 1 - -#define BRCMF_E_IF_ROLE_STA 0 -#define BRCMF_E_IF_ROLE_AP 1 -#define BRCMF_E_IF_ROLE_WDS 2 -/* Small, medium and maximum buffer size for dcmd */ #define BRCMF_DCMD_SMLEN 256
@@ -156,14 +115,6 @@ struct brcmf_pub {#endif }; -struct brcmf_if_event { -u8 ifidx; -u8 action; -u8 flags; -u8 bssidx; -u8 role; -}; -/* forward declarations */ struct brcmf_cfg80211_vif ;struct brcmf_fws_mac_descriptor ;
drivers/net/wireless/brcm80211/brcmfmac/fweh.h +54 -0
66 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 19/19 brcmfmac: expose chip information through debugfs
In reply to Arend van SprielAdding the debugfs file <debugfs_mnt>/brcmfmac/<devid>/chipinfo which contains the chip number and revision.
--- drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c | 36 ++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c +35 -1
@@ -22,7 +22,6 @@#include "dhd.h" #include "dhd_bus.h" #include "dhd_dbg.h" -#include "tracepoint.h" static struct dentry *root_folder;
@@ -42,6 +41,40 @@ void brcmf_debugfs_exit(void) root_folder =NULL ; } +static +ssize_t brcmf_debugfs_chipinfo_read (struct file *f,char __user *data, +size_t count,loff_t *ppos) +{ +struct brcmf_pub *drvr = f->private_data; +struct brcmf_bus *bus = drvr->bus_if; +char buf[40 ]; +int res; + +/* only allow read from start */ +if (*ppos >0 ) +return 0 ; + + res =scnprintf (buf,sizeof (buf),"chip: %x(%u) rev %u\n" , + bus->chip, bus->chip, bus->chiprev); +return simple_read_from_buffer (data, count, ppos, buf, res); +} + +static const struct file_operations brcmf_debugfs_chipinfo_ops = { + .owner =THIS_MODULE , + .open = simple_open, + .read = brcmf_debugfs_chipinfo_read +}; + +static int brcmf_debugfs_create_chipinfo (struct brcmf_pub *drvr) +{ +struct dentry *dentry = drvr->dbgfs_dir; + +if (!IS_ERR_OR_NULL (dentry)) +debugfs_create_file ("chipinfo" ,S_IRUGO , dentry, drvr, + &brcmf_debugfs_chipinfo_ops); +return 0 ; +} +int brcmf_debugfs_attach (struct brcmf_pub *drvr) {struct device *dev = drvr->bus_if->dev;
@@ -50,6 +83,7 @@ int brcmf_debugfs_attach(struct brcmf_pub *drvr)return -ENODEV ; drvr->dbgfs_dir =debugfs_create_dir (dev_name (dev), root_folder); +brcmf_debugfs_create_chipinfo (drvr);return PTR_ERR_OR_ZERO (drvr->dbgfs_dir); }
Signature · 1 line
1.7.10.4