Skip to contentSkip to conversation

Add power management support for mxs phy

PATCH Superseded Peter Chen 3 participants 32 messages Dec 3, 2013

Subsystems (3)

v4 of 12 Superseded Latest is v12 →

lore
Share & tools
lore

Peter Chen

author
#0 lore raw

v4 cover Add power management support for mxs phy

Hi Felipe & Shawn,

The serial adds power management support for MXS PHY, it includes:

- Add three common PHY APIs, .set_wakeup, .notify_suspend, notify_resume.
- Related above API implementation at mxs phy driver
- misc changes and bug fixes for mxs phy to support low power mode and wakeup.

It is based on Greg's usb-next, 3.13-rc1.

Changes for v4:
- Using MXS_PHY_HAS_ANATOP to indicate which platform has anatop module
- Using mxs_phy_data to instead of mxs_phy_platform_flag
- Create is_xxx_phy() MACRO
- Add imx6sl support, and pass the test [5/17]
- Add one additional binding doc for compatible string [1/17]
- Introduce controller id to access un-regulator register region [14/17] [15/17]
- Add waiting stable time before phy clock switches to AHB clock (from 32K) [13/17]
- Fix one problem that only using the 1st controller register at mxs_phy_disconnect_line [16/17]
- Fix one problem for low speed connection at very rare cases [17/17]
- Some typos

Changes for v3:
- Using flag bit to indicate SoC features/bugs, so we can remove platform_device_id.
- Remove 3 unnecessary dts/doc patches due to above change
- Several comment change

Changes for v2:

- Add missing patches which introduce platform judgement code [1/14,2/14]
- re-order the patch sequence, like doc->dts->source file, the reviewers can know the meaning of dt properties before review source
- Add description of two IC problems exsiting at mxs PHY; change "high speed" to "HS" and "non-high speed" to "FS/LS" [5/14]
- Change the dt property disconnect-line-without-vbus
that the separator should be "-" not the "_", meanwhile, related source code has changed.
- Using one local variable to get the function return val to avoid long condition statement. [13/14]

Peter Chen (17):
usb: doc: phy-mxs: Add more compatible strings
usb: phy-mxs: Add platform judgement code
usb: phy-mxs: Add auto clock and power setting
usb: doc: phy-mxs: update binding for adding anatop phandle
ARM: dts: imx6: add anatop phandle for usbphy
usb: phy-mxs: Add anatop regmap
usb: phy: add notify suspend and resume callback
usb: phy-mxs: Add implementation of nofity_suspend and notify_resume
usb: phy-mxs: Enable IC fixes for related SoCs
usb: phy: Add set_wakeup API
usb: phy-mxs: Add implementation of set_wakeup
usb: phy-mxs: Add system suspend/resume API
usb: phy-mxs: Add sync time after controller clear phcd
ARM: dts: imx: add mxs phy controller id
usb: phy-mxs: add controller id
usb: phy-mxs: fix the problem by only using 1st controller's register
usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

 Documentation/devicetree/bindings/usb/mxs-phy.txt |    5 +-
 arch/arm/boot/dts/imx23.dtsi                      |    1 +
 arch/arm/boot/dts/imx28.dtsi                      |    2 +
 arch/arm/boot/dts/imx6qdl.dtsi                    |    4 +
 arch/arm/boot/dts/imx6sl.dtsi                     |    4 +
 drivers/usb/phy/phy-mxs-usb.c                     |  398 ++++++++++++++++++++-
 include/linux/usb/phy.h                           |   39 ++
 7 files changed, 437 insertions(+), 16 deletions(-)
Signature · 1 line
1.7.8
author
#1 lore raw

PATCH v4 1/17 usb: doc: phy-mxs: Add more compatible strings

Add "fsl,imx6q-usbphy" for imx6dq and imx6dl, add
"fsl,imx6sl-usbphy" for imx6sl.

---
 Documentation/devicetree/bindings/usb/mxs-phy.txt |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
Documentation/devicetree/bindings/usb/mxs-phy.txt +2 -1
index 5835b27..d850e55 100644
@@ -1,7 +1,8 @@
 * Freescale MXS USB Phy Device
 
 Required properties:
-- compatible: Should be "fsl,imx23-usbphy"
+- compatible: "fsl,imx23-usbphy" for imx23 and imx28, "fsl,imx6q-usbphy"
+for imx6dq and imx6dl, "fsl,imx6sl-usbphy" for imx6sl
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
 
Signature · 1 line
1.7.8
author
#2 lore raw

PATCH v4 2/17 usb: phy-mxs: Add platform judgement code

In reply to Peter Chen

The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data.

---
 drivers/usb/phy/phy-mxs-usb.c |   58 ++++++++++++++++++++++++++++++++++------
 1 files changed, 49 insertions(+), 9 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +49 -9
index 545844b..f6cbc78 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -34,13 +35,55 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is an wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORAML_IN_SUSPEND		BIT(1)
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
+
+struct mxs_phy_data {
+	unsigned int flags;
+};
+
+static const struct mxs_phy_data imx23_phy_data = {
+	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};
+
+static const struct mxs_phy_data imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	const struct mxs_phy_data *data;
 };
 
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
-
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(mxs_phy_dt_ids, &pdev->dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
 	mxs_phy->clk = clk;
+	mxs_phy->data = of_id->data;
 
 	platform_set_drvdata(pdev, mxs_phy);
 
@@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mxs_phy_dt_ids[] = {
-	{ .compatible = "fsl,imx23-usbphy", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
-
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
 	.remove = mxs_phy_remove,
Signature · 1 line
1.7.8
#3 lore raw

PATCH v4 2/17 usb: phy-mxs: Add platform judgement code

Quoted 28 lines · Peter Chen

The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data.

---
 drivers/usb/phy/phy-mxs-usb.c |   58 ++++++++++++++++++++++++++++++++++------
 1 files changed, 49 insertions(+), 9 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +2 -1
index 545844b..f6cbc78 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #define DRIVER_NAME "mxs_phy"
 

drivers/usb/phy/phy-mxs-usb.c line 44

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +7 -0
@@ -34,13 +35,55 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is an wakeup after putting
                                           ^^
                                           a

Do you mean "messy state"?

drivers/usb/phy/phy-mxs-usb.c line 47

Quoted 3 lines
drivers/usb/phy/phy-mxs-usb.c +3 -0
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131203/4676e553/attachment.sig>
author
#4 lore raw

PATCH v4 2/17 usb: phy-mxs: Add platform judgement code

Quoted 41 lines · Marc Kleine-Budde
Quoted 28 lines · Peter Chen

The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data.

---
 drivers/usb/phy/phy-mxs-usb.c |   58 ++++++++++++++++++++++++++++++++++------
 1 files changed, 49 insertions(+), 9 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +2 -1
index 545844b..f6cbc78 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #define DRIVER_NAME "mxs_phy"
 

drivers/usb/phy/phy-mxs-usb.c line 44

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +7 -0
@@ -34,13 +35,55 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is an wakeup after putting
                                           ^^
                                           a
Quoted 1 line

Do you mean "messy state"?

Yes, will change the typo.

Signature · 2 lines
Best Regards,
Peter Chen
#5 lore raw

PATCH v4 2/17 usb: phy-mxs: Add platform judgement code

In reply to Peter Chen
Quoted 32 lines · Peter Chen

The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data.

---
 drivers/usb/phy/phy-mxs-usb.c |   58 ++++++++++++++++++++++++++++++++++------
 1 files changed, 49 insertions(+), 9 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +3 -1
index 545844b..f6cbc78 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -34,13 +35,55 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)

drivers/usb/phy/phy-mxs-usb.c line 48

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +10 -0
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is an wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORAML_IN_SUSPEND		BIT(1)

ABNORAML? -> ABNORMAL

Quoted 4 lines
drivers/usb/phy/phy-mxs-usb.c +4 -0
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.

drivers/usb/phy/phy-mxs-usb.c line 62

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +10 -0
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
+
+struct mxs_phy_data {
+	unsigned int flags;
+};
+
+static const struct mxs_phy_data imx23_phy_data = {
+	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};

ABNORAML? -> ABNORMAL

Quoted 64 lines
drivers/usb/phy/phy-mxs-usb.c +22 -8
+
+static const struct mxs_phy_data imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	const struct mxs_phy_data *data;
 };
 
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
-
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(mxs_phy_dt_ids, &pdev->dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
 	mxs_phy->clk = clk;
+	mxs_phy->data = of_id->data;
 
 	platform_set_drvdata(pdev, mxs_phy);
 
@@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mxs_phy_dt_ids[] = {
-	{ .compatible = "fsl,imx23-usbphy", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
-
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
 	.remove = mxs_phy_remove,
Signature · 1 line
1.7.8
Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
author
#6 lore raw

PATCH v4 2/17 usb: phy-mxs: Add platform judgement code

Quoted 8 lines

drivers/usb/phy/phy-mxs-usb.c line 62

Quoted 5 lines
drivers/usb/phy/phy-mxs-usb.c +4 -0
+
+static const struct mxs_phy_data imx23_phy_data = {
+	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};

ABNORAML? -> ABNORMAL

My careless, will change. Thanks.

Peter

Quoted 77 lines

drivers/usb/phy/phy-mxs-usb.c static int mxs_phy_probe(struct platform_device

Quoted 30 lines
drivers/usb/phy/phy-mxs-usb.c +19 -2
+
+static const struct mxs_phy_data imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	const struct mxs_phy_data *data;
 };
 
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
-
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device

*pdev)

drivers/usb/phy/phy-mxs-usb.c static int mxs_phy_probe(struct platform_device

Quoted 9 lines
drivers/usb/phy/phy-mxs-usb.c +2 -0
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(mxs_phy_dt_ids, &pdev->dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device

*pdev)

drivers/usb/phy/phy-mxs-usb.c static int mxs_phy_remove(struct platform_device

Quoted 8 lines
drivers/usb/phy/phy-mxs-usb.c +1 -0
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
 	mxs_phy->clk = clk;
+	mxs_phy->data = of_id->data;
 
 	platform_set_drvdata(pdev, mxs_phy);
 
@@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device

*pdev)

Quoted 13 lines
drivers/usb/phy/phy-mxs-usb.c +0 -7
 	return 0;
 }
 
-static const struct of_device_id mxs_phy_dt_ids[] = {
-	{ .compatible = "fsl,imx23-usbphy", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
-
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
 	.remove = mxs_phy_remove,
--
Quoted 4 lines

1.7.8

--
Pengutronix e.K. |
|
Industrial Linux Solutions | http://www.pengutronix.de/
|
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555
|

author
#7 lore raw

PATCH v4 3/17 usb: phy-mxs: Add auto clock and power setting

In reply to Peter Chen

With the auto setting, the PHY's clock and power can be recovered correctly from low power mode, it is ganranteed by IC logic.

---
 drivers/usb/phy/phy-mxs-usb.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +17 -3
index f6cbc78..70b084d 100644
@@ -31,6 +31,11 @@
 
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
 #define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
@@ -96,9 +101,18 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	/* Power up the PHY */
 	writel(0, base + HW_USBPHY_PWD);
 
-	/* enable FS/LS device */
-	writel(BM_USBPHY_CTRL_ENUTMILEVEL2 |
-	       BM_USBPHY_CTRL_ENUTMILEVEL3,
+	/*
+	 * USB PHY Ctrl Setting
+	 * - Auto clock/power on
+	 * - Enable full/low speed support
+	 */
+	writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+		BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+		BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+		BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+		BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
+		BM_USBPHY_CTRL_ENUTMILEVEL2 |
+		BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
 
 	return 0;
Signature · 1 line
1.7.8
author
#8 lore raw

PATCH v4 4/17 usb: doc: phy-mxs: update binding for adding anatop phandle

In reply to Peter Chen

Add anatop phandle which is used to access anatop registers to control PHY's power and other USB operations.

---
 Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
Documentation/devicetree/bindings/usb/mxs-phy.txt +2 -0
index d850e55..059536c 100644
@@ -5,10 +5,12 @@ Required properties:
 for imx6dq and imx6dl, "fsl,imx6sl-usbphy" for imx6sl
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
+- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
 
 Example:
 usbphy1: usbphy at 020c9000 {
 	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 	reg = <0x020c9000 0x1000>;
 	interrupts = <0 44 0x04>;
+	fsl,anatop = <&anatop>;
 };
Signature · 1 line
1.7.8
author
#9 lore raw

PATCH v4 5/17 ARM: dts: imx6: add anatop phandle for usbphy

In reply to Peter Chen

Add anatop phandle for usbphy

---
 arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
 arch/arm/boot/dts/imx6sl.dtsi  |    2 ++
 2 files changed, 4 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl.dtsi +2 -0
index 59154dc..4e74962 100644
@@ -557,6 +557,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
 				clocks = <&clks 182>;
+				fsl,anatop = <&anatop>;
 			};
 
 			usbphy2: usbphy at 020ca000 {
@@ -564,6 +565,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
 				clocks = <&clks 183>;
+				fsl,anatop = <&anatop>;
 			};
 
 			snvs at 020cc000 {
arch/arm/boot/dts/imx6sl.dtsi +2 -0
index 28558f1..30322b5 100644
@@ -489,6 +489,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
 			};
 
 			usbphy2: usbphy at 020ca000 {
@@ -496,6 +497,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
 			};
 
 			snvs at 020cc000 {
Signature · 1 line
1.7.8
author
#10 lore raw

PATCH v4 6/17 usb: phy-mxs: Add anatop regmap

In reply to Peter Chen

It is needed by imx6 SoC series, but not for imx23 and imx28.

---
 drivers/usb/phy/phy-mxs-usb.c |   23 +++++++++++++++++++++--
 1 files changed, 21 insertions(+), 2 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +21 -2
index 70b084d..d34df4c 100644
@@ -21,6 +21,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -58,6 +60,9 @@
  */
 #define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
 
+/* The SoCs who have anatop module */
+#define MXS_PHY_HAS_ANATOP			BIT(3)
+
 struct mxs_phy_data {
 	unsigned int flags;
 };
@@ -68,11 +73,13 @@ static const struct mxs_phy_data imx23_phy_data = {
 
 static const struct mxs_phy_data imx6q_phy_data = {
 	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
-		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_HAS_ANATOP,
 };
 
 static const struct mxs_phy_data imx6sl_phy_data = {
-	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_HAS_ANATOP,
 };
 
 static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -87,6 +94,7 @@ struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
 	const struct mxs_phy_data *data;
+	struct regmap *regmap_anatop;
 };
 
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
@@ -190,6 +198,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	int ret;
 	const struct of_device_id *of_id =
 			of_match_device(mxs_phy_dt_ids, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -226,6 +235,16 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mxs_phy);
 
+	if (mxs_phy->data->flags & MXS_PHY_HAS_ANATOP) {
+		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
+			(np, "fsl,anatop");
+		if (IS_ERR(mxs_phy->regmap_anatop)) {
+			dev_dbg(&pdev->dev,
+				"failed to find regmap for anatop\n");
+			return PTR_ERR(mxs_phy->regmap_anatop);
+		}
+	}
+
 	ret = usb_add_phy_dev(&mxs_phy->phy);
 	if (ret)
 		return ret;
Signature · 1 line
1.7.8
author
#11 lore raw

PATCH v4 7/17 usb: phy: add notify suspend and resume callback

In reply to Peter Chen

They are used to notify PHY that the controller enters suspend or finishes resume.

---
 include/linux/usb/phy.h |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
include/linux/usb/phy.h +23 -0
index 6c0b1c5..a747960 100644
@@ -116,6 +116,11 @@ struct usb_phy {
 			enum usb_device_speed speed);
 	int	(*notify_disconnect)(struct usb_phy *x,
 			enum usb_device_speed speed);
+	int	(*notify_suspend)(struct usb_phy *x,
+			enum usb_device_speed speed);
+	int	(*notify_resume)(struct usb_phy *x,
+			enum usb_device_speed speed);
+
 };
 
 /**
@@ -282,6 +287,24 @@ usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed)
 		return 0;
 }
 
+static inline int usb_phy_notify_suspend
+	(struct usb_phy *x, enum usb_device_speed speed)
+{
+	if (x && x->notify_suspend)
+		return x->notify_suspend(x, speed);
+	else
+		return 0;
+}
+
+static inline int usb_phy_notify_resume
+	(struct usb_phy *x, enum usb_device_speed speed)
+{
+	if (x && x->notify_resume)
+		return x->notify_resume(x, speed);
+	else
+		return 0;
+}
+
 /* notifiers */
 static inline int
 usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
Signature · 1 line
1.7.8
author
#12 lore raw

PATCH v4 8/17 usb: phy-mxs: Add implementation of nofity_suspend and notify_resume

In reply to Peter Chen

Implementation of notify_suspend and notify_resume will be different according to mxs_phy_data->flags.

---
 drivers/usb/phy/phy-mxs-usb.c |   55 ++++++++++++++++++++++++++++++++++++++---
 1 files changed, 51 insertions(+), 4 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +51 -4
index d34df4c..8738890 100644
@@ -166,8 +166,8 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 static int mxs_phy_on_connect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
-	dev_dbg(phy->dev, "%s speed device has connected\n",
-		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
+	dev_dbg(phy->dev, "%s device has connected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
 	if (speed == USB_SPEED_HIGH)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -179,8 +179,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy,
 static int mxs_phy_on_disconnect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
-	dev_dbg(phy->dev, "%s speed device has disconnected\n",
-		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
+	dev_dbg(phy->dev, "%s device has disconnected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
 	if (speed == USB_SPEED_HIGH)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -189,6 +189,48 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
 	return 0;
 }
 
+static int mxs_phy_on_suspend(struct usb_phy *phy,
+		enum usb_device_speed speed)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	dev_dbg(phy->dev, "%s device has suspended\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+	/* delay 4ms to wait bus entering idle */
+	usleep_range(4000, 5000);
+
+	if (mxs_phy->data->flags & MXS_PHY_ABNORAML_IN_SUSPEND) {
+		writel_relaxed(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
+		writel_relaxed(0, phy->io_priv + HW_USBPHY_PWD);
+	}
+
+	if (speed == USB_SPEED_HIGH)
+		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+				phy->io_priv + HW_USBPHY_CTRL_CLR);
+
+	return 0;
+}
+
+/*
+ * The resume signal must be finished here.
+ */
+static int mxs_phy_on_resume(struct usb_phy *phy,
+		enum usb_device_speed speed)
+{
+	dev_dbg(phy->dev, "%s device has resumed\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+	if (speed == USB_SPEED_HIGH) {
+		/* Make sure the device has switched to High-Speed mode */
+		udelay(500);
+		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+				phy->io_priv + HW_USBPHY_CTRL_SET);
+	}
+
+	return 0;
+}
+
 static int mxs_phy_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -235,6 +277,11 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mxs_phy);
 
+	if (mxs_phy->data->flags & MXS_PHY_SENDING_SOF_TOO_FAST) {
+		mxs_phy->phy.notify_suspend = mxs_phy_on_suspend;
+		mxs_phy->phy.notify_resume = mxs_phy_on_resume;
+	}
+
 	if (mxs_phy->data->flags & MXS_PHY_HAS_ANATOP) {
 		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
 			(np, "fsl,anatop");
Signature · 1 line
1.7.8
author
#13 lore raw

PATCH v4 9/17 usb: phy-mxs: Enable IC fixes for related SoCs

In reply to Peter Chen

Some PHY bugs are fixed by IC logic, but these bits are not enabled by default, so we enable them at driver.

---
 drivers/usb/phy/phy-mxs-usb.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +20 -0
index 8738890..0908d74 100644
@@ -31,6 +31,10 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
@@ -42,6 +46,8 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -97,6 +103,16 @@ struct mxs_phy {
 	struct regmap *regmap_anatop;
 };
 
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}
+
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -123,6 +139,10 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 		BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
 
+	/* Enable IC solution */
+	if (is_imx6q_phy(mxs_phy) || is_imx6sl_phy(mxs_phy))
+		writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
 	return 0;
 }
 
Signature · 1 line
1.7.8
#14 lore raw

PATCH v4 9/17 usb: phy-mxs: Enable IC fixes for related SoCs

Quoted 35 lines · Peter Chen

Some PHY bugs are fixed by IC logic, but these bits are not enabled by default, so we enable them at driver.

---
 drivers/usb/phy/phy-mxs-usb.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +6 -0
index 8738890..0908d74 100644
@@ -31,6 +31,10 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
@@ -42,6 +46,8 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -97,6 +103,16 @@ struct mxs_phy {
 	struct regmap *regmap_anatop;
 };

drivers/usb/phy/phy-mxs-usb.c struct mxs_phy { · line 114

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +9 -0
 
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}

Why don't you use a a BIT() here as in Patch 2/17, too?

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131203/1f1a2b29/attachment.sig>
author
#15 lore raw

PATCH v4 9/17 usb: phy-mxs: Enable IC fixes for related SoCs

Quoted 40 lines · Peter Chen

drivers/usb/phy/phy-mxs-

Quoted 9 lines

Some PHY bugs are fixed by IC logic, but these bits are not enabled by default, so we enable them at driver.

---
 drivers/usb/phy/phy-mxs-usb.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs- renamed from drivers/usb/phy/phy-mxs-usb.c +0 -0

usb.c

Quoted 27 lines

index 8738890..0908d74 100644

drivers/usb/phy/phy-mxs-usb.c +6 -0
@@ -31,6 +31,10 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
@@ -42,6 +46,8 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -97,6 +103,16 @@ struct mxs_phy {
 	struct regmap *regmap_anatop;
 };
 
Quoted 12 lines

drivers/usb/phy/phy-mxs-usb.c struct mxs_phy { · line 114

Quoted 9 lines
drivers/usb/phy/phy-mxs-usb.c +9 -0
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}

Why don't you use a a BIT() here as in Patch 2/17, too?

Thanks, I will define the two PHY problems as the register bit position at 2/17, and use those two MACROs at this patch. Is it your point?

Peter

#16 lore raw

PATCH v4 9/17 usb: phy-mxs: Enable IC fixes for related SoCs

Quoted 53 lines · Peter Chen
Quoted 40 lines · Peter Chen

drivers/usb/phy/phy-mxs-

Quoted 9 lines

Some PHY bugs are fixed by IC logic, but these bits are not enabled by default, so we enable them at driver.

---
 drivers/usb/phy/phy-mxs-usb.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs- renamed from drivers/usb/phy/phy-mxs-usb.c +0 -0

usb.c

Quoted 27 lines

index 8738890..0908d74 100644

drivers/usb/phy/phy-mxs-usb.c +6 -0
@@ -31,6 +31,10 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
@@ -42,6 +46,8 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -97,6 +103,16 @@ struct mxs_phy {
 	struct regmap *regmap_anatop;
 };
 
Quoted 12 lines

drivers/usb/phy/phy-mxs-usb.c struct mxs_phy { · line 114

Quoted 9 lines
drivers/usb/phy/phy-mxs-usb.c +9 -0
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}

Why don't you use a a BIT() here as in Patch 2/17, too?

Quoted 3 lines

Thanks, I will define the two PHY problems as the register bit position at 2/17, and use those two MACROs at this patch. Is it your point?

I was wondering if the driver looks more uniform if you use something like this:

#define MXS_PHY_NEED_IP_FIX BIT(3)

drivers/usb/phy/phy-mxs-usb.c static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) · line 143

Quoted 9 lines

static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) {

drivers/usb/phy/phy-mxs-usb.c +2 -0
 	int ret;
@@ -123,6 +139,10 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 		BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
 
+	/* Enable IC solution */
+	if (is_imx6q_phy(mxs_phy) || is_imx6sl_phy(mxs_phy))
	if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)

drivers/usb/phy/phy-mxs-usb.c static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) · line 147

Quoted 4 lines
drivers/usb/phy/phy-mxs-usb.c +2 -0
+		writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
 	return 0;
 }

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131203/b19e8fdc/attachment.sig>
author
#17 lore raw

PATCH v4 9/17 usb: phy-mxs: Enable IC fixes for related SoCs

Quoted 57 lines · Peter Chen
Quoted 53 lines
Quoted 52 lines · Peter Chen

drivers/usb/phy/phy-mxs-

Quoted 9 lines

Some PHY bugs are fixed by IC logic, but these bits are not enabled by default, so we enable them at driver.

---
 drivers/usb/phy/phy-mxs-usb.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs- renamed from drivers/usb/phy/phy-mxs-usb.c +0 -0

usb.c

Quoted 26 lines

index 8738890..0908d74 100644

drivers/usb/phy/phy-mxs-usb.c +6 -0
@@ -31,6 +31,10 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
@@ -42,6 +46,8 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -97,6 +103,16 @@ struct mxs_phy {
 	struct regmap *regmap_anatop;
 };

drivers/usb/phy/phy-mxs-usb.c struct mxs_phy { · line 114

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +9 -0
 
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}

Why don't you use a a BIT() here as in Patch 2/17, too?

Quoted 9 lines
Quoted 3 lines

Thanks, I will define the two PHY problems as the register bit position at 2/17, and use those two MACROs at this patch. Is it your point?

I was wondering if the driver looks more uniform if you use something like this:

#define MXS_PHY_NEED_IP_FIX BIT(3)

OK, will change like below:

if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)

	writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);

Peter

author
#18 lore raw

PATCH v4 10/17 usb: phy: Add set_wakeup API

In reply to Peter Chen

This API is used to set wakeup enable at PHY registers, in that case, the PHY can be waken up from suspend due to external events, like vbus change, dp/dm change and id change.

---
 include/linux/usb/phy.h |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)
include/linux/usb/phy.h +16 -0
index a747960..c6ebe1d 100644
@@ -111,6 +111,13 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/*
+	 * Set wakeup enable for PHY, in that case, the PHY can be
+	 * waken up from suspend status due to external events,
+	 * like vbus change, dp/dm change and id.
+	 */
+	int	(*set_wakeup)(struct usb_phy *x, bool enabled);
+
 	/* notify phy connect status change */
 	int	(*notify_connect)(struct usb_phy *x,
 			enum usb_device_speed speed);
@@ -270,6 +277,15 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	if (x && x->set_wakeup)
+		return x->set_wakeup(x, enabled);
+	else
+		return 0;
+}
+
+static inline int
 usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed)
 {
 	if (x && x->notify_connect)
Signature · 1 line
1.7.8
author
#19 lore raw

PATCH v4 11/17 usb: phy-mxs: Add implementation of set_wakeup

In reply to Peter Chen

When we need the PHY can be waken up by external signals, we can call this API. Besides, we call mxs_phy_disconnect_line at this API to close the connection between USB PHY and controller, after that, the line state from controller is SE0. Once the PHY is out of power, without calling mxs_phy_disconnect_line, there are unknown wakeups due to dp/dm floating at device mode.

---
 drivers/usb/phy/phy-mxs-usb.c |   79 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +79 -0
index 0908d74..84680e3 100644
@@ -31,6 +31,9 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_DEBUG_SET			0x54
+#define HW_USBPHY_DEBUG_CLR			0x58
+
 #define HW_USBPHY_IP				0x90
 #define HW_USBPHY_IP_SET			0x94
 #define HW_USBPHY_IP_CLR			0x98
@@ -39,6 +42,9 @@
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP		BIT(23)
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP		BIT(22)
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP		BIT(21)
 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
 #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
@@ -48,6 +54,19 @@
 
 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
 
+#define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
+
+/* Anatop Registers */
+#define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+
+#define ANADIG_USB1_LOOPBACK_SET		0x1e4
+#define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN	BIT(5)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -146,6 +165,48 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	return 0;
 }
 
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	bool vbus_is_on = false;
+	static bool line_is_disconnected;
+	unsigned int vbus_value = 0;
+
+	/* If the SoCs don't need to disconnect line without vbus, quit */
+	if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
+		return;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT,
+			&vbus_value);
+	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+		vbus_is_on = true;
+
+	if (on && !vbus_is_on) {
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_CLR);
+		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_SET,
+				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+		/* Delay some time, and let Linestate be SE0 for controller */
+		usleep_range(500, 1000);
+		line_is_disconnected = true;
+	} else if (line_is_disconnected) {
+		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_CLR,
+				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_SET);
+		line_is_disconnected = false;
+	}
+
+	dev_dbg(mxs_phy->phy.dev, "line is %s\n", line_is_disconnected
+			? "disconnected" : "connected");
+}
+
 static int mxs_phy_init(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
@@ -183,6 +244,23 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
+static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+				BM_USBPHY_CTRL_ENIDCHG_WKUP;
+	if (enabled) {
+		mxs_phy_disconnect_line(mxs_phy, true);
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
+	} else {
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
+		mxs_phy_disconnect_line(mxs_phy, false);
+	}
+
+	return 0;
+}
+
 static int mxs_phy_on_connect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
@@ -289,6 +367,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
 	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
+	mxs_phy->phy.set_wakeup		= mxs_phy_set_wakeup;
 
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
Signature · 1 line
1.7.8
author
#20 lore raw

PATCH v4 12/17 usb: phy-mxs: Add system suspend/resume API

In reply to Peter Chen

We need this to keep PHY's power on or off during the system suspend mode. If we need to enable USB wakeup, then we must keep PHY's power being on during the system suspend mode. Otherwise, we need to keep PHY's power being off to save power.

---
 drivers/usb/phy/phy-mxs-usb.c |   48 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 48 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +48 -0
index 84680e3..3e25c3d 100644
@@ -57,11 +57,18 @@
 #define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
 
 /* Anatop Registers */
+#define ANADIG_ANA_MISC0			0x150
+#define ANADIG_ANA_MISC0_SET			0x154
+#define ANADIG_ANA_MISC0_CLR			0x158
+
 #define ANADIG_USB1_VBUS_DET_STAT		0x1c0
 
 #define ANADIG_USB1_LOOPBACK_SET		0x1e4
 #define ANADIG_USB1_LOOPBACK_CLR		0x1e8
 
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
+
 #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
 
 #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
@@ -207,6 +214,22 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 			? "disconnected" : "connected");
 }
 
+static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
+{
+	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	if (is_imx6q_phy(mxs_phy))
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
+	else if (is_imx6sl_phy(mxs_phy))
+		regmap_write(mxs_phy->regmap_anatop,
+			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
+}
+
 static int mxs_phy_init(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
@@ -391,6 +414,8 @@ static int mxs_phy_probe(struct platform_device *pdev)
 		}
 	}
 
+	device_set_wakeup_capable(&pdev->dev, true);
+
 	ret = usb_add_phy_dev(&mxs_phy->phy);
 	if (ret)
 		return ret;
@@ -407,6 +432,28 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int mxs_phy_system_suspend(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
+
+	return 0;
+}
+
+static int mxs_phy_system_resume(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, mxs_phy_system_resume);
+
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
 	.remove = mxs_phy_remove,
@@ -414,6 +461,7 @@ static struct platform_driver mxs_phy_driver = {
 		.name = DRIVER_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = mxs_phy_dt_ids,
+		.pm = &mxs_phy_pm,
 	 },
 };
 
Signature · 1 line
1.7.8
author
#21 lore raw

PATCH v4 13/17 usb: phy-mxs: Add sync time after controller clear phcd

In reply to Peter Chen

After clear portsc.phcd, PHY needs 200us stable time for switch 32K clock to AHB clock.

---
 drivers/usb/phy/phy-mxs-usb.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +11 -0
index 3e25c3d..52e80d9 100644
@@ -139,6 +139,15 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
 	return mxs_phy->data == &imx6sl_phy_data;
 }
 
+/*
+ * PHY needs some 32K cycles to switch from 32K clock to
+ * bus (such as AHB/AXI, etc) clock.
+ */
+static void mxs_phy_clock_switch(void)
+{
+	usleep_range(300, 400);
+}
+
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -234,6 +243,7 @@ static int mxs_phy_init(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 
+	mxs_phy_clock_switch();
 	clk_prepare_enable(mxs_phy->clk);
 	return mxs_phy_hw_init(mxs_phy);
 }
@@ -258,6 +268,7 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
 	} else {
+		mxs_phy_clock_switch();
 		clk_prepare_enable(mxs_phy->clk);
 		writel(BM_USBPHY_CTRL_CLKGATE,
 		       x->io_priv + HW_USBPHY_CTRL_CLR);
Signature · 1 line
1.7.8
author
#22 lore raw

PATCH v4 14/17 ARM: dts: imx: add mxs phy controller id

In reply to Peter Chen

We need to use controller id to access different register regions for mxs phy.

---
 arch/arm/boot/dts/imx23.dtsi   |    1 +
 arch/arm/boot/dts/imx28.dtsi   |    2 ++
 arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
 arch/arm/boot/dts/imx6sl.dtsi  |    2 ++
 4 files changed, 7 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx23.dtsi +1 -0
index c96ceae..a231f3d 100644
@@ -23,6 +23,7 @@
 		serial1 = &auart1;
 		spi0 = &ssp0;
 		spi1 = &ssp1;
+		usbphy0 = &usbphy0;
 	};
 
 	cpus {
arch/arm/boot/dts/imx28.dtsi +2 -0
index cda19c8..671dda0 100644
@@ -32,6 +32,8 @@
 		serial4 = &auart4;
 		spi0 = &ssp1;
 		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
 	};
 
 	cpus {
arch/arm/boot/dts/imx6qdl.dtsi +2 -0
index 4e74962..c23803d 100644
@@ -33,6 +33,8 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
 	};
 
 	intc: interrupt-controller at 00a01000 {
arch/arm/boot/dts/imx6sl.dtsi +2 -0
index 30322b5..a06d939 100644
@@ -27,6 +27,8 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
 	};
 
 	cpus {
Signature · 1 line
1.7.8
author
#23 lore raw

PATCH v4 15/17 usb: phy-mxs: add controller id

In reply to Peter Chen

It is used to access un-regulator registers according to different controllers.

---
 drivers/usb/phy/phy-mxs-usb.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +8 -0
index 52e80d9..4c2dfcd 100644
@@ -127,6 +127,7 @@ struct mxs_phy {
 	struct clk *clk;
 	const struct mxs_phy_data *data;
 	struct regmap *regmap_anatop;
+	int port_id;
 };
 
 static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
@@ -392,6 +393,13 @@ static int mxs_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	ret = of_alias_get_id(np, "usbphy");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	mxs_phy->port_id = ret;
+
 	mxs_phy->phy.io_priv		= base;
 	mxs_phy->phy.dev		= &pdev->dev;
 	mxs_phy->phy.label		= DRIVER_NAME;
Signature · 1 line
1.7.8
author
#24 lore raw

PATCH v4 16/17 usb: phy-mxs: fix the problem by only using 1st controller's register

In reply to Peter Chen

We fix the problem that we only use the 1st controller's related registers at mxs_phy_disconnect_line, but in fact, it needs to access registers according to different PHYs.

---
 drivers/usb/phy/phy-mxs-usb.c |   89 +++++++++++++++++++++++++++++------------
 1 files changed, 63 insertions(+), 26 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +63 -26
index 4c2dfcd..542b6ec 100644
@@ -62,17 +62,23 @@
 #define ANADIG_ANA_MISC0_CLR			0x158
 
 #define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+#define ANADIG_USB2_VBUS_DET_STAT		0x220
 
 #define ANADIG_USB1_LOOPBACK_SET		0x1e4
 #define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+#define ANADIG_USB2_LOOPBACK_SET		0x244
+#define ANADIG_USB2_LOOPBACK_CLR		0x248
 
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
 
 #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID	BIT(3)
 
 #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
 #define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN	BIT(5)
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
 
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
@@ -182,12 +188,61 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	return 0;
 }
 
-static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+/* Return true if the vbus is there */
+static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
+{
+	unsigned int vbus_value;
+
+	if (mxs_phy->port_id == 0)
+		regmap_read(mxs_phy->regmap_anatop,
+			ANADIG_USB1_VBUS_DET_STAT,
+			&vbus_value);
+	else if (mxs_phy->port_id == 1)
+		regmap_read(mxs_phy->regmap_anatop,
+			ANADIG_USB2_VBUS_DET_STAT,
+			&vbus_value);
+
+	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+		return true;
+	else
+		return false;
+}
+
+static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
 {
 	void __iomem *base = mxs_phy->phy.io_priv;
+	u32 reg;
+
+	if (disconnect)
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_CLR);
+
+	if (mxs_phy->port_id == 0) {
+		reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
+			: ANADIG_USB1_LOOPBACK_CLR;
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+			BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+	} else if (mxs_phy->port_id == 1) {
+		reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
+			: ANADIG_USB2_LOOPBACK_CLR;
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
+			BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
+	}
+
+	if (!disconnect)
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_SET);
+
+	/* Delay some time, and let Linestate be SE0 for controller */
+	if (disconnect)
+		usleep_range(500, 1000);
+}
+
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
 	bool vbus_is_on = false;
-	static bool line_is_disconnected;
-	unsigned int vbus_value = 0;
 
 	/* If the SoCs don't need to disconnect line without vbus, quit */
 	if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
@@ -197,31 +252,13 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 	if (!mxs_phy->regmap_anatop)
 		return;
 
-	regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT,
-			&vbus_value);
-	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
-		vbus_is_on = true;
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
-	if (on && !vbus_is_on) {
-		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
-			base + HW_USBPHY_DEBUG_CLR);
-		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_SET,
-				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
-				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
-		/* Delay some time, and let Linestate be SE0 for controller */
-		usleep_range(500, 1000);
-		line_is_disconnected = true;
-	} else if (line_is_disconnected) {
-		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_CLR,
-				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
-				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
-		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
-				base + HW_USBPHY_DEBUG_SET);
-		line_is_disconnected = false;
-	}
+	if (on && !vbus_is_on)
+		__mxs_phy_disconnect_line(mxs_phy, true);
+	else
+		__mxs_phy_disconnect_line(mxs_phy, false);
 
-	dev_dbg(mxs_phy->phy.dev, "line is %s\n", line_is_disconnected
-			? "disconnected" : "connected");
 }
 
 static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
Signature · 1 line
1.7.8
#25 lore raw

PATCH v4 16/17 usb: phy-mxs: fix the problem by only using 1st controller's register

Quoted 3 lines · Peter Chen

We fix the problem that we only use the 1st controller's related registers at mxs_phy_disconnect_line, but in fact, it needs to access registers according to different PHYs.

Are you fixing the code that has been added in this series before? If so, please squash into the patch. Don't add the broken code in the first place.

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131203/bfee54e4/attachment-0001.sig>
author
#26 lore raw

PATCH v4 16/17 usb: phy-mxs: fix the problem by only using 1st controller's register

Quoted 9 lines · Marc Kleine-Budde
Quoted 3 lines · Peter Chen

We fix the problem that we only use the 1st controller's related registers at mxs_phy_disconnect_line, but in fact, it needs to access registers according to different PHYs.

Are you fixing the code that has been added in this series before? If so, please squash into the patch. Don't add the broken code in the first place.

Thanks, will do squash

Signature · 2 lines
Best Regards,
Peter Chen
author
#27 lore raw

PATCH v4 17/17 usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

In reply to Peter Chen

At very rare cases, the SoF will not send out after resume with low speed connection. The workaround is do not power down PWD.RXPWD1PT1 bit during the suspend.

---
 drivers/usb/phy/phy-mxs-usb.c |   47 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 46 insertions(+), 1 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +46 -1
index 542b6ec..5ae4a57 100644
@@ -69,6 +69,9 @@
 #define ANADIG_USB2_LOOPBACK_SET		0x244
 #define ANADIG_USB2_LOOPBACK_CLR		0x248
 
+#define ANADIG_USB1_MISC			0x1f0
+#define ANADIG_USB2_MISC			0x250
+
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
 
@@ -80,6 +83,11 @@
 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
 
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS		BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -296,12 +304,49 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 	clk_disable_unprepare(mxs_phy->clk);
 }
 
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+	unsigned int line_state;
+	/* bit definition is the same for all controllers */
+	unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+		     dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+	unsigned int reg = ANADIG_USB1_MISC;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
+	if (mxs_phy->port_id == 0)
+		reg = ANADIG_USB1_MISC;
+	else if (mxs_phy->port_id == 1)
+		reg = ANADIG_USB2_MISC;
+
+	regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+	if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
+		return true;
+	else
+		return false;
+}
+
 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	bool low_speed_connection, vbus_is_on;
+
+	low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
 	if (suspend) {
-		writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		/*
+		 * FIXME: Do not power down RXPWD1PT1 bit for low speed
+		 * connect. The low speed connection will have problem at
+		 * very rare cases during usb suspend and resume process.
+		 */
+		if (low_speed_connection & vbus_is_on)
+			writel(0xfffbffff, x->io_priv + HW_USBPHY_PWD);
+		else
+			writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
 		writel(BM_USBPHY_CTRL_CLKGATE,
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
Signature · 1 line
1.7.8
#28 lore raw

PATCH v4 17/17 usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

Quoted 3 lines · Peter Chen

At very rare cases, the SoF will not send out after resume with low speed connection. The workaround is do not power down PWD.RXPWD1PT1 bit during the suspend.

Is this also a fix for newly added code? If so please also squash.

Quoted 62 lines
---
 drivers/usb/phy/phy-mxs-usb.c |   47 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 46 insertions(+), 1 deletions(-)
drivers/usb/phy/phy-mxs-usb.c +33 -0
index 542b6ec..5ae4a57 100644
@@ -69,6 +69,9 @@
 #define ANADIG_USB2_LOOPBACK_SET		0x244
 #define ANADIG_USB2_LOOPBACK_CLR		0x248
 
+#define ANADIG_USB1_MISC			0x1f0
+#define ANADIG_USB2_MISC			0x250
+
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
 
@@ -80,6 +83,11 @@
 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
 
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS		BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -296,12 +304,49 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 	clk_disable_unprepare(mxs_phy->clk);
 }
 
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+	unsigned int line_state;
+	/* bit definition is the same for all controllers */
+	unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+		     dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+	unsigned int reg = ANADIG_USB1_MISC;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
+	if (mxs_phy->port_id == 0)
+		reg = ANADIG_USB1_MISC;
+	else if (mxs_phy->port_id == 1)
+		reg = ANADIG_USB2_MISC;
+
+	regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+	if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
+		return true;
+	else
+		return false;
+}
+
 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 {

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_shutdown(struct usb_phy *phy) · line 342

Quoted 10 lines
drivers/usb/phy/phy-mxs-usb.c +6 -1
 	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	bool low_speed_connection, vbus_is_on;
+
+	low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
 	if (suspend) {
-		writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		/*
+		 * FIXME: Do not power down RXPWD1PT1 bit for low speed

Is this FIXME still true?

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_shutdown(struct usb_phy *phy) · line 352

Quoted 11 lines
drivers/usb/phy/phy-mxs-usb.c +7 -0
+		 * connect. The low speed connection will have problem at
+		 * very rare cases during usb suspend and resume process.
+		 */
+		if (low_speed_connection & vbus_is_on)
+			writel(0xfffbffff, x->io_priv + HW_USBPHY_PWD);
+		else
+			writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
 		writel(BM_USBPHY_CTRL_CLKGATE,
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131203/443e04f2/attachment.sig>
author
#29 lore raw

PATCH v4 17/17 usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

Quoted 10 lines · Peter Chen
Quoted 3 lines

At very rare cases, the SoF will not send out after resume with low speed connection. The workaround is do not power down PWD.RXPWD1PT1 bit during the suspend.

Is this also a fix for newly added code? If so please also squash.

No, it is a workaround for new problem.

Quoted 70 lines
Quoted 3 lines
---
 drivers/usb/phy/phy-mxs-usb.c |   47

++++++++++++++++++++++++++++++++++++++++-

drivers/usb/phy/phy-mxs-

Quoted 3 lines
 1 files changed, 46 insertions(+), 1 deletions(-)
drivers/usb/phy/phy-mxs- renamed from drivers/usb/phy/phy-mxs-usb.c +0 -0

usb.c

Quoted 62 lines

index 542b6ec..5ae4a57 100644

drivers/usb/phy/phy-mxs-usb.c +37 -0
@@ -69,6 +69,9 @@
 #define ANADIG_USB2_LOOPBACK_SET		0x244
 #define ANADIG_USB2_LOOPBACK_CLR		0x248
 
+#define ANADIG_USB1_MISC			0x1f0
+#define ANADIG_USB2_MISC			0x250
+
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
 
@@ -80,6 +83,11 @@
 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
 
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS		BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -296,12 +304,49 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 	clk_disable_unprepare(mxs_phy->clk);
 }
 
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+	unsigned int line_state;
+	/* bit definition is the same for all controllers */
+	unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+		     dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+	unsigned int reg = ANADIG_USB1_MISC;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
+	if (mxs_phy->port_id == 0)
+		reg = ANADIG_USB1_MISC;
+	else if (mxs_phy->port_id == 1)
+		reg = ANADIG_USB2_MISC;
+
+	regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+	if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
+		return true;
+	else
+		return false;
+}
+
 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	bool low_speed_connection, vbus_is_on;
+
+	low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
Quoted 6 lines

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_shutdown(struct usb_phy *phy) · line 342

Quoted 4 lines
drivers/usb/phy/phy-mxs-usb.c +2 -1
 	if (suspend) {
-		writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		/*
+		 * FIXME: Do not power down RXPWD1PT1 bit for low speed

Is this FIXME still true?

Yes, still not find the root cause.

Peter

Quoted 20 lines

drivers/usb/phy/phy-mxs-usb.c static void mxs_phy_shutdown(struct usb_phy *phy) · line 352

Quoted 12 lines
drivers/usb/phy/phy-mxs-usb.c +7 -0
+		 * connect. The low speed connection will have problem at
+		 * very rare cases during usb suspend and resume process.
+		 */
+		if (low_speed_connection & vbus_is_on)
+			writel(0xfffbffff, x->io_priv + HW_USBPHY_PWD);
+		else
+			writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
 		writel(BM_USBPHY_CTRL_CLKGATE,
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);

Marc

--

Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
#30 lore raw

PATCH v4 17/17 usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

Quoted 8 lines · Peter Chen
Quoted 6 lines · Peter Chen
Quoted 3 lines

At very rare cases, the SoF will not send out after resume with low speed connection. The workaround is do not power down PWD.RXPWD1PT1 bit during the suspend.

Is this also a fix for newly added code? If so please also squash.

No, it is a workaround for new problem.

If this would be a fix, it's better to put this as first patch into a series, so that it can be applied to the stable trees easier.

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131203/0a1ccb14/attachment.sig>
author
#31 lore raw

PATCH v4 17/17 usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

Quoted 8 lines · Peter Chen
Quoted 5 lines
Quoted 5 lines · Peter Chen
Quoted 3 lines

At very rare cases, the SoF will not send out after resume with low speed connection. The workaround is do not power down PWD.RXPWD1PT1 bit during the suspend.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Is this also a fix for newly added code? If so please also squash.

No, it is a workaround for new problem.

If this would be a fix, it's better to put this as first patch into a series, so that it can be applied to the stable trees easier.

It is introduced by [3/17], without [3/17] it needs another fix which we have not intended to use. I will squash them, thanks.

Peter