Get am3517 working with device tree
Subsystems (4)
Tony Lindgren
maintainercover Get am3517 working with device tree
Hi all,
Looks like I missed am3517 earlier when making mach-omap2 boot in device tree only mode. Here are patches to make am3517-evm bootable with NFSroot and MMC with device tree.
This should make it easy to add further support and also to add support for the missing am3517 craneboard and cm-t3517 boards.
These should apply against v3.12 except for the pdata-quirks.c patch that depends on the earlier mach-omap2 device tree conversion patches.
Regards,
Tony
Nishanth Menon (1):
ARM: OMAP2+: Fix the machine entry for am3517
Tony Lindgren (4):
arm/dts: Fix missing entries for am3517
ARM: OMAP2+: Use pdata quirks for emac on am3517 ARM/dts: Add basic devices on am3517-evm
ARM: OMAP2+: Remove legacy emac code
arch/arm/boot/dts/am3517-evm.dts | 35 ++++++++++- arch/arm/boot/dts/am3517.dtsi | 63 ++++++++++++++++++++ arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/am35xx-emac.c | 115 ------------------------------------ arch/arm/mach-omap2/am35xx-emac.h | 15 ----- arch/arm/mach-omap2/board-generic.c | 18 ++++++ arch/arm/mach-omap2/pdata-quirks.c | 43 ++++++++++++++ 7 files changed, 156 insertions(+), 136 deletions(-) create mode 100644 arch/arm/boot/dts/am3517.dtsi delete mode 100644 arch/arm/mach-omap2/am35xx-emac.c delete mode 100644 arch/arm/mach-omap2/am35xx-emac.h
Signature · 1 line
1.8.1.1
Tony Lindgren
maintainerPATCH 1/5 arm/dts: Fix missing entries for am3517
On am3517 there are some extra devices compared to omap3.dtsi that we currently have not defined. Let's fix that by adding am3517.dtsi file.
--- arch/arm/boot/dts/am3517.dtsi | 63 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 arch/arm/boot/dts/am3517.dtsi
arch/arm/boot/dts/am3517.dtsi new file +63 -0
@@ -0,0 +1,63 @@ +/* + * Device Tree Source for am3517 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + am35x_otg_hs: am35x_otg_hs at 5c040000 { + compatible = "ti,omap3-musb"; + ti,hwmods = "am35x_otg_hs"; + status = "disabled"; + reg = <0x5c040000 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; + + davinci_emac: ethernet at 0x5c000000 { + compatible = "ti,am3517-emac"; + ti,hwmods = "davinci_emac"; + status = "disabled"; + reg = <0x5c000000 0x30000>; + interrupts = <67 68 69 70>; + ti,davinci-ctrl-reg-offset = <0x10000>; + ti,davinci-ctrl-mod-reg-offset = <0>; + ti,davinci-ctrl-ram-offset = <0x20000>; + ti,davinci-ctrl-ram-size = <0x2000>; + ti,davinci-rmii-en = /bits/ 8 <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: ethernet at 0x5c030000 { + compatible = "ti,davinci_mdio"; + ti,hwmods = "davinci_mdio"; + status = "disabled"; + reg = <0x5c030000 0x1000>; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart4: serial at 4809e000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + status = "disabled"; + reg = <0x4809e000 0x400>; + interrupts = <84>; + dmas = <&sdma 55 &sdma 54>; + dma-names = "tx", "rx"; + clock-frequency = <48000000>; + }; + }; +};
Signature · 1 line
1.8.1.1
Tony Lindgren
maintainerPATCH 2/5 ARM: OMAP2+: Fix the machine entry for am3517
In reply to Tony LindgrenFrom: Nishanth Menon <[email protected]>
The am3517 is wrongly booting as omap3 which means that the am3517 specific devices like Ethernet won't work when booted with device tree. Now with the new devices defined in am3517.dtsi, let's use that instead of the omap3.dtsi, and add a separate machine entry for am3517 so am3517-evm can use it.
--- arch/arm/boot/dts/am3517-evm.dts | 6 +++--- arch/arm/mach-omap2/board-generic.c | 18 ++++++++++++++++++ 2 files changed, 21 insertions(+), 3 deletions(-)
arch/arm/boot/dts/am3517-evm.dts +3 -3
@@ -7,11 +7,11 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "am3517.dtsi" / { - model = "TI AM3517 EVM (AM3517/05)"; - compatible = "ti,am3517-evm", "ti,omap3"; + model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; + compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; memory { device_type = "memory";
arch/arm/mach-omap2/board-generic.c +18 -0
@@ -139,6 +139,24 @@ static const char *am33xx_boards_compat[] __initdata = { NULL, }; +static const char *am3517_boards_compat[]__initdata = { +"ti,am3517" , +NULL , +}; + +DT_MACHINE_START (AM3517_DT ,"Generic AM3517 (Flattened Device Tree)" ) + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = am35xx_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = am3517_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END +DT_MACHINE_START (AM33XX_DT ,"Generic AM33XX (Flattened Device Tree)" ) .reserve = omap_reserve, .map_io = am33xx_map_io,
Signature · 1 line
1.8.1.1
Tony Lindgren
maintainerPATCH 3/5 ARM: OMAP2+: Use pdata quirks for emac on am3517
In reply to Tony LindgrenAs the emac uses the system control module registers for reset and interrupts, we need to pass those in the platform data until we have a separate system control module driver.
--- arch/arm/mach-omap2/pdata-quirks.c | 43 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
arch/arm/mach-omap2/pdata-quirks.c +43 -0
@@ -8,6 +8,7 @@* published by the Free Software Foundation. */ #include <linux/clk.h> +#include <linux/davinci_emac.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h>
@@ -16,6 +17,7 @@#include <linux/platform_data/pinctrl-single.h> +#include "am35xx.h" #include "common.h" #include "common-board-devices.h" #include "dss-common.h"
@@ -118,6 +120,42 @@ static void __init omap3_zoom_legacy_init(void) {legacy_init_wl12xx (WL12XX_REFCLOCK_26 ,0 ,162 ); } + +static void am35xx_enable_emac_int (void ) +{ +u32 v; + + v =omap_ctrl_readl (AM35XX_CONTROL_LVL_INTR_CLEAR ); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR |AM35XX_CPGMAC_C0_TX_PULSE_CLR | +AM35XX_CPGMAC_C0_MISC_PULSE_CLR |AM35XX_CPGMAC_C0_RX_THRESH_CLR ); +omap_ctrl_writel (v,AM35XX_CONTROL_LVL_INTR_CLEAR ); +omap_ctrl_readl (AM35XX_CONTROL_LVL_INTR_CLEAR );/* OCP barrier */ +} + +static void am35xx_disable_emac_int (void ) +{ +u32 v; + + v =omap_ctrl_readl (AM35XX_CONTROL_LVL_INTR_CLEAR ); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR |AM35XX_CPGMAC_C0_TX_PULSE_CLR ); +omap_ctrl_writel (v,AM35XX_CONTROL_LVL_INTR_CLEAR ); +omap_ctrl_readl (AM35XX_CONTROL_LVL_INTR_CLEAR );/* OCP barrier */ +} + +static struct emac_platform_data am35xx_emac_pdata = { + .interrupt_enable = am35xx_enable_emac_int, + .interrupt_disable = am35xx_disable_emac_int, +}; + +static void __init am3517_evm_legacy_init (void ) +{ +u32 v; + + v =omap_ctrl_readl (AM35XX_CONTROL_IP_SW_RESET ); + v &= ~AM35XX_CPGMACSS_SW_RST ; +omap_ctrl_writel (v,AM35XX_CONTROL_IP_SW_RESET ); +omap_ctrl_readl (AM35XX_CONTROL_IP_SW_RESET );/* OCP barrier */ +}#endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_ARCH_OMAP4
@@ -186,6 +224,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {#ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA ("ti,omap3-padconf" ,0x48002030 ,"48002030.pinmux" , &pcs_pdata),OF_DEV_AUXDATA ("ti,omap3-padconf" ,0x48002a00 ,"48002a00.pinmux" , &pcs_pdata), +/* Only on am3517 */ +OF_DEV_AUXDATA ("ti,davinci_mdio" ,0x5c030000 ,"davinci_mdio.0" ,NULL ), +OF_DEV_AUXDATA ("ti,am3517-emac" ,0x5c000000 ,"davinci_emac.0" , + &am35xx_emac_pdata), #endif #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
@@ -207,6 +249,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-ldp", omap3_ldp_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, + { "ti,am3517-evm", am3517_evm_legacy_init, }, #endif #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, },
Signature · 1 line
1.8.1.1
Tony Lindgren
maintainerPATCH 4/5 ARM/dts: Add basic devices on am3517-evm
In reply to Tony LindgrenLet's add the Ethernet so NFSroot works and the first MMC card so people can patch in more support easily.
--- arch/arm/boot/dts/am3517-evm.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
arch/arm/boot/dts/am3517-evm.dts +29 -0
@@ -17,6 +17,21 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + vmmc_fixed: vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&davinci_emac { + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; }; &i2c1 {
@@ -30,3 +45,17 @@ &i2c3 { clock-frequency = <400000>; }; + +&mmc1 { + vmmc-supply = <&vmmc_fixed>; + bus-width = <4>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; +
Signature · 1 line
1.8.1.1
Tony Lindgren
maintainerPATCH 5/5 ARM: OMAP2+: Remove legacy emac code
In reply to Tony LindgrenThis is no longer needed when booted with device tree.
--- arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/am35xx-emac.c | 115 -------------------------------------- arch/arm/mach-omap2/am35xx-emac.h | 15 ----- 3 files changed, 133 deletions(-) delete mode 100644 arch/arm/mach-omap2/am35xx-emac.c delete mode 100644 arch/arm/mach-omap2/am35xx-emac.h
arch/arm/mach-omap2/Makefile +0 -3
@@ -258,7 +258,4 @@ ifneq ($(CONFIG_HWSPINLOCK_OMAP),) obj-y += hwspinlock.o endif -emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o -obj-y += $(emac-m) $(emac-y) - obj-y += common-board-devices.o dss-common.o
arch/arm/mach-omap2/am35xx-emac.c deleted +0 -115
115 lines not on this page · raw message
arch/arm/mach-omap2/am35xx-emac.h deleted +0 -15
@@ -1,15 +0,0 @@ -/* -* Copyright (C) 2011 Ilya Yanok, Emcraft Systems -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000 - -#if defined(CONFIG_TI_DAVINCI_EMAC ) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE ) -void am35xx_emac_init (unsigned long mdio_bus_freq,u8 rmii_en); -#else -static inline void am35xx_emac_init (unsigned long mdio_bus_freq,u8 rmii_en) {} -#endif
Signature · 1 line
1.8.1.1