arm, omap3: Add support for TechNexion modules
PATCH v2 1/5 arm, omap3: Add support for TechNexion modules
From: Tapani Utriainen <[email protected]>
Add support for TechNexion TAO3530 SoM
This patch has been posted quite a long time ago. I ported it to the latest mainline U-Boot version. With some additional cleanup and enhancements.
---
v2:
- Removed ULPI defines as they are not needed (incorrect) here
- Moved MACH_TYPE from mach-types.h to board config header
- Use puts instead of printf when possible
- Removed some unused defines
- Switched to alterate memtest
board/technexion/tao3530/Makefile | 5 + board/technexion/tao3530/tao3530.c | 170 +++++++++++++++++ board/technexion/tao3530/tao3530.h | 364 +++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/tao3530.h | 301 ++++++++++++++++++++++++++++++ 5 files changed, 841 insertions(+) create mode 100644 board/technexion/tao3530/Makefile create mode 100644 board/technexion/tao3530/tao3530.c create mode 100644 board/technexion/tao3530/tao3530.h create mode 100644 include/configs/tao3530.h
board/technexion/tao3530/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := tao3530.o
board/technexion/tao3530/tao3530.c new file +170 -0
170 lines not on this page · raw message
board/technexion/tao3530/tao3530.h new file +364 -0
364 lines not on this page · raw message
boards.cfg +1 -0
@@ -325,6 +325,7 @@ Active arm armv7 omap3 logicpd zoom1 Active arm armv7 omap3 logicpd zoom2 omap3_zoom2 - Tom Rix <[email protected]> Active arm armv7 omap3 matrix_vision mvblx omap3_mvblx - Michael Jones <[email protected]> Active arm armv7 omap3 nokia rx51 nokia_rx51 - Pali Roh?r <[email protected]> +Active arm armv7 omap3 technexion tao3530 tao3530 - Tapani Utriainen <[email protected]> Active arm armv7 omap3 technexion twister twister - Stefano Babic <[email protected]> Active arm armv7 omap3 teejet mt_ventoux mt_ventoux - Stefano Babic <[email protected]> Active arm armv7 omap3 ti am3517crane am3517_crane - Nagendra T S <[email protected]>
include/configs/tao3530.h new file +301 -0
301 lines not on this page · raw message
Signature · 1 line
1.8.4.4
PATCH v2 2/5 arm: omap3: Add SPL support to tao3530
Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).
Tested by booting via MMC and NAND.
---
v2:
- Added CONFIG_NAND_OMAP_ECCSCHEME
board/technexion/tao3530/tao3530.c | 27 +++++++++++++++- include/configs/tao3530.h | 65 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 91 insertions(+), 1 deletion(-)
board/technexion/tao3530/tao3530.c +26 -1
@@ -67,6 +67,31 @@ out:return ret; } +#ifdef CONFIG_SPL_BUILD +/* +* Routine: get_board_mem_timings +* Description: If we use SPL then there is no x-loader nor config header +* so we have to setup the DDR timings ourself on both banks. +*/ +void get_board_mem_timings (struct board_sdrc_timings *timings) +{ +if (tao3530_revision () <3 ) { +/* 256MB / Bank */ + timings->mcfg =MCFG (256 <<20 ,14 );/* RAS-width 14 */ + timings->ctrla =HYNIX_V_ACTIMA_165 ; + timings->ctrlb =HYNIX_V_ACTIMB_165 ; + }else { +/* 128MB / Bank */ + timings->mcfg =MCFG (128 <<20 ,13 );/* RAS-width 13 */ + timings->ctrla =MICRON_V_ACTIMA_165 ; + timings->ctrlb =MICRON_V_ACTIMB_165 ; + } + + timings->mr =MICRON_V_MR_165 ; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; +} +#endif +/* * Routine: board_init * Description: Early hardware init.
@@ -134,7 +159,7 @@ void set_muxconf_regs(void)MUX_TAO3530 (); } -#ifdef CONFIG_GENERIC_MMC +#if defined(CONFIG_GENERIC_MMC ) && !defined(CONFIG_SPL_BUILD )int board_mmc_init (bd_t *bis) {omap_mmc_init (0 ,0 ,0 ,-1 ,-1 );
include/configs/tao3530.h +65 -0
75 lines not on this page · raw message
Signature · 1 line
1.8.4.4
PATCH v2 2/5 arm: omap3: Add SPL support to tao3530
Quoted 10 lines · Stefan Roese
Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).
Tested by booting via MMC and NAND.
Signed-off-by Stefan Roese <[email protected]>Cc Tapani Utriainen <[email protected]>Cc Thorsten Eisbein <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/fd6e3015/attachment.pgp>
PATCH v2 3/5 arm: omap3: Remove bootargs mem_size handling
In reply to Stefan RoeseThe memory size is autodetected and is passed to the Linux kernel either via ATAGs or device-tree (dtb). So there is no need to pass it via the bootargs.
---
v2:
- No change
board/technexion/tao3530/tao3530.c | 12 ------------ include/configs/tao3530.h | 3 --- 2 files changed, 15 deletions(-)
board/technexion/tao3530/tao3530.c +0 -12
@@ -133,18 +133,6 @@ int misc_init_r(void)dieid_num_r (); -/* Set memory size environment variable, depending on revision */ -switch (tao3530_revision ()) { -case 0x2 :/* Rev C1 -- 256MB */ -setenv ("mem_size" ,"mem=256M" ); -break ; -case 0x3 :/* Rev A2/B2 -- 128MB */ -setenv ("mem_size" ,"mem=128M" ); -break ; -default : -printf ("Warning: Unknown TAO3530 rev, setting mem=128M\n" ); - } -return 0 ; }
include/configs/tao3530.h +0 -3
@@ -146,21 +146,18 @@"video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \"lcd_mode=omapfb.mode=lcd:800x480 at 60 \0" \"extra_options= \0" \ -"mem_size=mem=128M \0" \"mmcdev=0\0" \"mmcroot=/dev/mmcblk0p2 rw\0" \"mmcrootfstype=ext3 rootwait\0" \"nandroot=ubi0:rootfs ubi.mtd=4\0" \"nandrootfstype=ubifs\0" \"mmcargs=setenv bootargs console=${console} " \ -"${mem_size} " \"mpurate=${mpurate} " \"${video_mode} " \"root=${mmcroot} " \"rootfstype=${mmcrootfstype} " \"${extra_options}\0" \"nandargs=setenv bootargs console=${console} " \ -"${mem_size} " \"mpurate=${mpurate} " \"${video_mode} " \"${network_setting} " \
Signature · 1 line
1.8.4.4
PATCH v2 3/5 arm: omap3: Remove bootargs mem_size handling
Quoted 8 lines · Stefan Roese
The memory size is autodetected and is passed to the Linux kernel either via ATAGs or device-tree (dtb). So there is no need to pass it via the bootargs.
Signed-off-by Stefan Roese <[email protected]>Cc Tapani Utriainen <[email protected]>Cc Thorsten Eisbein <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/daa5e8d8/attachment.pgp>
PATCH v2 4/5 arm: omap3: Add board revision output to tao3530
In reply to Stefan Roese---
v2:
- Use puts instead of printf when possible
board/technexion/tao3530/tao3530.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
board/technexion/tao3530/tao3530.c +17 -0
@@ -131,6 +131,23 @@ int misc_init_r(void)writel (GPIO31 |GPIO30 |GPIO29 |GPIO28 |GPIO22 |GPIO21 |GPIO15 |GPIO14 |GPIO13 |GPIO12 , &gpio5_base->setdataout); +switch (tao3530_revision ()) { +case 0 : +puts ("TAO-3530 REV Reserve 1\n" ); +break ; +case 1 : +puts ("TAO-3530 REV Reserve 2\n" ); +break ; +case 2 : +puts ("TAO-3530 REV Cx\n" ); +break ; +case 3 : +puts ("TAO-3530 REV Ax/Bx\n" ); +break ; +default : +puts ("Unknown board revision\n" ); + } +dieid_num_r ();return 0 ;
Signature · 1 line
1.8.4.4
PATCH v2 4/5 arm: omap3: Add board revision output to tao3530
Quoted 11 lines · Stefan Roese
Signed-off-by Stefan Roese <[email protected]>Cc Tapani Utriainen <[email protected]>Cc Thorsten Eisbein <[email protected]>Cc Tom Rini <[email protected]>---
v2:
- Use puts instead of printf when possibleboard/technexion/tao3530/tao3530.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/f483a651/attachment.pgp>
PATCH v2 5/5 arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
In reply to Stefan RoeseThe Head acoustics (HA) baseboard used the Technexion TAO3530 SOM and has only some minor differences to the Technexion Thunder baseboard. This patch adds support for this HA baseboard / TAO3530 as the "omap3_ha" build target.
---
v2:
- Remove "\n" in sysinfo string
board/technexion/tao3530/tao3530.c | 15 +++++++++++++++ board/technexion/tao3530/tao3530.h | 7 +++++++ boards.cfg | 1 + 3 files changed, 23 insertions(+)
board/technexion/tao3530/tao3530.c +15 -0
@@ -75,6 +75,18 @@ out:*/ void get_board_mem_timings (struct board_sdrc_timings *timings) { +#if defined(CONFIG_SYS_BOARD_OMAP3_HA ) +/* +* Switch baseboard LED to red upon power-on +*/ +MUX_OMAP3_HA (); + +/* Request a gpio before using it */ +gpio_request (111 ,"" ); +/* Sets the gpio as output and its value to 1, switch LED to red */ +gpio_direction_output (111 ,1 ); +#endif +if (tao3530_revision () <3 ) {/* 256MB / Bank */ timings->mcfg =MCFG (256 <<20 ,14 );/* RAS-width 14 */
@@ -162,6 +174,9 @@ int misc_init_r(void)void set_muxconf_regs (void ) {MUX_TAO3530 (); +#if defined(CONFIG_SYS_BOARD_OMAP3_HA ) +MUX_OMAP3_HA (); +#endif }#if defined(CONFIG_GENERIC_MMC ) && !defined(CONFIG_SPL_BUILD )
board/technexion/tao3530/tao3530.h +7 -0
@@ -9,7 +9,11 @@const omap3_sysinfo sysinfo = {DDR_STACKED , +#if defined(CONFIG_SYS_BOARD_OMAP3_HA) +"HEAD acoustics OMAP3-HA" , +#else"OMAP3 TAO-3530 board" , +#endif"NAND" , };
@@ -361,4 +365,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) \ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) +#define MUX_OMAP3_HA () \ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M4))/* GPIO_111 */ +#endif
boards.cfg +1 -0
@@ -325,6 +325,7 @@ Active arm armv7 omap3 logicpd zoom1 Active arm armv7 omap3 logicpd zoom2 omap3_zoom2 - Tom Rix <[email protected]> Active arm armv7 omap3 matrix_vision mvblx omap3_mvblx - Michael Jones <[email protected]> Active arm armv7 omap3 nokia rx51 nokia_rx51 - Pali Roh?r <[email protected]> +Active arm armv7 omap3 technexion tao3530 omap3_ha tao3530:SYS_BOARD_OMAP3_HA Stefan Roese <[email protected]> Active arm armv7 omap3 technexion tao3530 tao3530 - Tapani Utriainen <[email protected]> Active arm armv7 omap3 technexion twister twister - Stefano Babic <[email protected]> Active arm armv7 omap3 teejet mt_ventoux mt_ventoux - Stefano Babic <[email protected]>
Signature · 1 line
1.8.4.4
PATCH v2 5/5 arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
Quoted 9 lines · Stefan Roese
The Head acoustics (HA) baseboard used the Technexion TAO3530 SOM and has only some minor differences to the Technexion Thunder baseboard. This patch adds support for this HA baseboard / TAO3530 as the "
omap3_ha" build target.Signed-off-by Stefan Roese <[email protected]>Cc Tapani Utriainen <[email protected]>Cc Thorsten Eisbein <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/a46c0b7c/attachment.pgp>
PATCH v2 1/5 arm, omap3: Add support for TechNexion modules
In reply to Stefan RoeseQuoted 8 lines · Stefan Roese
From: Tapani Utriainen <[email protected]>
Add support for TechNexion TAO3530 SoM
This patch has been posted quite a long time ago. I ported it to the latest mainline U-Boot version. With some additional cleanup and enhancements.
Quoted 5 lines
Signed-off-by Tapani Utriainen <[email protected]>CC Sandeep Paulraj <[email protected]>Signed-off-by Stefan Roese <[email protected]>Cc Thorsten Eisbein <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/fed0fde8/attachment.pgp>