ARM: OMAP2+: enable EHCI by default
Subsystems (2)
PATCH 1/1 ARM: OMAP2+: enable EHCI by default
This is needed for the pandaboard (ES) kernel to detect the ethernet device during boot. Useful for NFS root etc.
--- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -212,6 +212,7 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y
Signature · 1 line
1.8.4.3
Tony Lindgren
maintainerQuoted 2 lines · Thomas Pedersen
This is needed for the pandaboard (ES) kernel to detect the ethernet device during boot. Useful for NFS root etc.
Thanks for the patch, just to clarify why we have not been able to apply this is EHCI blocks deeper PM states for at least omap3 currently. And this means the PM related tests won't run properly out of the box..
Roger has been working to get EHCI working properly with PM, and the recent interrupts-extended binding and the addition of wake-up interrupts to pinctrl-single.c should allow us to do that soon. Maybe Roger can summarize what else might still be missing?
Regards,
Tony
Quoted 20 lines
Signed-off-by Thomas Pedersen <[email protected]>--- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+)arch/arm/configs/omap2plus_defconfig +1
-0@@ -212,6 +212,7 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=ySignature · 1 line
1.8.4.3
Quoted 9 lines · Tony Lindgren
Quoted 2 lines · Thomas Pedersen
This is needed for the pandaboard (ES) kernel to detect the ethernet device during boot. Useful for NFS root etc.
Thanks for the patch, just to clarify why we have not been able to apply this is EHCI blocks deeper PM states for at least omap3 currently. And this means the PM related tests won't run properly out of the box..
Quoted 5 lines
Roger has been working to get EHCI working properly with PM, and the recent interrupts-extended binding and the addition of wake-up interrupts to
pinctrl-single.cshould allow us to do that soon. Maybe Roger can summarize what else might still be missing?
Right, I just need to spend some time on it.
cheers,
-roger