Skip to contentSkip to conversation

perf script: Add an option to print the source line number

PATCH In review Adrian Hunter 4 participants 13 messages Dec 6, 2013 – Dec 13, 2013 perf events

lore
Share & tools
lore

Adrian Hunter

author reviewer
#0 lore raw

v2 cover perf script: Add an option to print the source line number

Hi

Here is perf script srcline printing.

Changes in V2:
Also print scrline for callchains

Adrian Hunter (3):
perf script: Fix symoff printing in callchains perf script: Add an option to print the source line number perf script: Improve srcline display for BTS

 tools/perf/Documentation/perf-script.txt |  2 +-
 tools/perf/builtin-script.c              | 30 +++++++++++++++++++++++++-----
 tools/perf/util/map.c                    | 17 +++++++++++++++++
 tools/perf/util/map.h                    |  2 ++
 tools/perf/util/session.c                | 15 ++++++++++++++-
 tools/perf/util/session.h                |  1 +
 6 files changed, 60 insertions(+), 7 deletions(-)

Regards
Adrian

author reviewer
#1 lore raw

PATCH v2 1/3 perf script: Fix symoff printing in callchains

The address being used to calculate the offset was the memory address but the address needed is the address mapped to the dso. i.e. the 'addr' member of 'struct addr_location'

---
 tools/perf/util/session.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
tools/perf/util/session.c +6 -1
index 8a7da6f..c236b38 100644
@@ -1515,6 +1515,8 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 			node_al = *al;
 
 		while (stack_depth) {
+			u64 addr = 0;
+
 			node = callchain_cursor_current(&callchain_cursor);
 			if (!node)
 				break;
@@ -1525,10 +1527,13 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 			if (print_ip)
 				printf("%c%16" PRIx64, s, node->ip);
 
+			if (node->map)
+				addr = node->map->map_ip(node->map, node->ip);
+
 			if (print_sym) {
 				printf(" ");
 				if (print_symoffset) {
-					node_al.addr = node->ip;
+					node_al.addr = addr;
 					node_al.map  = node->map;
 					symbol__fprintf_symname_offs(node->sym, &node_al, stdout);
 				} else
Signature · 1 line
1.7.11.7
Acked-by on v2 1/3
#2 lore raw

Re: [PATCH V2 1/3] perf script: Fix symoff printing in callchains

Quoted 10 lines · Adrian Hunter

The address being used to calculate the offset was the memory address but the address needed is the address mapped to the dso. i.e. the 'addr' member of 'struct addr_location'

---
  tools/perf/util/session.c | 7 ++++++-
  1 file changed, 6 insertions(+), 1 deletion(-)
#3 lore raw

[tip:perf/core] perf script: Fix symoff printing in callchains

In reply to Adrian Hunter
perf script: Fix symoff printing in callchains
Commit-ID:  a4eb24a49566db77ee999b46603f602a0302f481
Gitweb:     http://git.kernel.org/tip/a4eb24a49566db77ee999b46603f602a0302f481
Author:     Adrian Hunter <[email protected]>
AuthorDate: Fri, 6 Dec 2013 09:42:56 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 9 Dec 2013 11:13:50 -0300

perf script: Fix symoff printing in callchains

The address being used to calculate the offset was the memory address but the address needed is the address mapped to the dso. i.e. the 'addr' member of 'struct addr_location'

Cc Andi Kleen <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mike Galbraith <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
---
 tools/perf/util/session.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
tools/perf/util/session.c +6 -1
index 8a7da6f..c236b38 100644
@@ -1515,6 +1515,8 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 			node_al = *al;
 
 		while (stack_depth) {
+			u64 addr = 0;
+
 			node = callchain_cursor_current(&callchain_cursor);
 			if (!node)
 				break;
@@ -1525,10 +1527,13 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 			if (print_ip)
 				printf("%c%16" PRIx64, s, node->ip);
 
+			if (node->map)
+				addr = node->map->map_ip(node->map, node->ip);
+
 			if (print_sym) {
 				printf(" ");
 				if (print_symoffset) {
-					node_al.addr = node->ip;
+					node_al.addr = addr;
 					node_al.map  = node->map;
 					symbol__fprintf_symname_offs(node->sym, &node_al, stdout);
 				} else
author reviewer
#4 lore raw

PATCH v2 2/3 perf script: Add an option to print the source line number

In reply to Adrian Hunter

Add field 'srcline' that displays the source file name and line number associated with the sample ip. The information displayed is the same as from addr2line.

---
 tools/perf/Documentation/perf-script.txt |  2 +-
 tools/perf/builtin-script.c              | 10 ++++++++++
 tools/perf/util/map.c                    | 17 +++++++++++++++++
 tools/perf/util/map.h                    |  2 ++
 tools/perf/util/session.c                |  8 ++++++++
 tools/perf/util/session.h                |  1 +
 6 files changed, 39 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-script.txt +1 -1
index cfdbb1e..c2a5071 100644
@@ -115,7 +115,7 @@ OPTIONS
 -f::
 --fields::
         Comma separated list of fields to print. Options are:
-        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff.
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff, srcline.
         Field list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
         e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
tools/perf/builtin-script.c +10 -0
index 4484886..7a571fb 100644
@@ -43,6 +43,7 @@ enum perf_output_field {
 	PERF_OUTPUT_DSO             = 1U << 9,
 	PERF_OUTPUT_ADDR            = 1U << 10,
 	PERF_OUTPUT_SYMOFFSET       = 1U << 11,
+	PERF_OUTPUT_SRCLINE         = 1U << 12,
 };
 
 struct output_option {
@@ -61,6 +62,7 @@ struct output_option {
 	{.str = "dso",   .field = PERF_OUTPUT_DSO},
 	{.str = "addr",  .field = PERF_OUTPUT_ADDR},
 	{.str = "symoff", .field = PERF_OUTPUT_SYMOFFSET},
+	{.str = "srcline", .field = PERF_OUTPUT_SRCLINE},
 };
 
 /* default set to maintain compatibility with current format */
@@ -210,6 +212,11 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
 		       "to DSO.\n");
 		return -EINVAL;
 	}
+	if (PRINT_FIELD(SRCLINE) && !PRINT_FIELD(IP)) {
+		pr_err("Display of source line number requested but sample IP is not\n"
+		       "selected. Hence, no address to lookup the source line number.\n");
+		return -EINVAL;
+	}
 
 	if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
 		perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID",
@@ -245,6 +252,9 @@ static void set_print_ip_opts(struct perf_event_attr *attr)
 
 	if (PRINT_FIELD(SYMOFFSET))
 		output[type].print_ip_opts |= PRINT_IP_OPT_SYMOFFSET;
+
+	if (PRINT_FIELD(SRCLINE))
+		output[type].print_ip_opts |= PRINT_IP_OPT_SRCLINE;
 }
 
 /*
tools/perf/util/map.c +17 -0
index ef5bc91..9b9bd71 100644
@@ -11,6 +11,7 @@
 #include "strlist.h"
 #include "vdso.h"
 #include "build-id.h"
+#include "util.h"
 #include <linux/string.h>
 
 const char *map_type__name[MAP__NR_TYPES] = {
@@ -252,6 +253,22 @@ size_t map__fprintf_dsoname(struct map *map, FILE *fp)
 	return fprintf(fp, "%s", dsoname);
 }
 
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+			 FILE *fp)
+{
+	char *srcline;
+	int ret = 0;
+
+	if (map && map->dso) {
+		srcline = get_srcline(map->dso,
+				      map__rip_2objdump(map, addr));
+		if (srcline != SRCLINE_UNKNOWN)
+			ret = fprintf(fp, "%s%s", prefix, srcline);
+		free_srcline(srcline);
+	}
+	return ret;
+}
+
 /**
  * map__rip_2objdump - convert symbol start address to objdump address.
  * @map: memory map
tools/perf/util/map.h +2 -0
index e4e259c..18068c6 100644
@@ -103,6 +103,8 @@ struct map *map__clone(struct map *map);
 int map__overlap(struct map *l, struct map *r);
 size_t map__fprintf(struct map *map, FILE *fp);
 size_t map__fprintf_dsoname(struct map *map, FILE *fp);
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+			 FILE *fp);
 
 int map__load(struct map *map, symbol_filter_t filter);
 struct symbol *map__find_symbol(struct map *map,
tools/perf/util/session.c +8 -0
index c236b38..e748f29 100644
@@ -1497,6 +1497,7 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 	int print_dso = print_opts & PRINT_IP_OPT_DSO;
 	int print_symoffset = print_opts & PRINT_IP_OPT_SYMOFFSET;
 	int print_oneline = print_opts & PRINT_IP_OPT_ONELINE;
+	int print_srcline = print_opts & PRINT_IP_OPT_SRCLINE;
 	char s = print_oneline ? ' ' : '\t';
 
 	if (symbol_conf.use_callchain && sample->callchain) {
@@ -1546,6 +1547,10 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 				printf(")");
 			}
 
+			if (print_srcline)
+				map__fprintf_srcline(node->map, addr, "\n  ",
+						     stdout);
+
 			if (!print_oneline)
 				printf("\n");
 
@@ -1575,6 +1580,9 @@ next:
 			map__fprintf_dsoname(al->map, stdout);
 			printf(")");
 		}
+
+		if (print_srcline)
+			map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
 	}
 }
 
tools/perf/util/session.h +1 -0
index 004d3e8..2a3955e 100644
@@ -45,6 +45,7 @@ struct perf_session {
 #define PRINT_IP_OPT_DSO		(1<<2)
 #define PRINT_IP_OPT_SYMOFFSET	(1<<3)
 #define PRINT_IP_OPT_ONELINE	(1<<4)
+#define PRINT_IP_OPT_SRCLINE	(1<<5)
 
 struct perf_tool;
 
Signature · 1 line
1.7.11.7
#5 lore raw
Quoted 3 lines · Adrian Hunter

Add field 'srcline' that displays the source file name and line number associated with the sample ip. The information displayed is the same as from addr2line.

example output?

Quoted 138 lines
---
  tools/perf/Documentation/perf-script.txt |  2 +-
  tools/perf/builtin-script.c              | 10 ++++++++++
  tools/perf/util/map.c                    | 17 +++++++++++++++++
  tools/perf/util/map.h                    |  2 ++
  tools/perf/util/session.c                |  8 ++++++++
  tools/perf/util/session.h                |  1 +
  6 files changed, 39 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-script.txt +1 -1
index cfdbb1e..c2a5071 100644
@@ -115,7 +115,7 @@ OPTIONS
  -f::
  --fields::
          Comma separated list of fields to print. Options are:
-        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff.
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff, srcline.
          Field list can be prepended with the type, trace, sw or hw,
          to indicate to which event type the field list applies.
          e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
tools/perf/builtin-script.c +10 -0
index 4484886..7a571fb 100644
@@ -43,6 +43,7 @@ enum perf_output_field {
  	PERF_OUTPUT_DSO             = 1U << 9,
  	PERF_OUTPUT_ADDR            = 1U << 10,
  	PERF_OUTPUT_SYMOFFSET       = 1U << 11,
+	PERF_OUTPUT_SRCLINE         = 1U << 12,
  };
 
  struct output_option {
@@ -61,6 +62,7 @@ struct output_option {
  	{.str = "dso",   .field = PERF_OUTPUT_DSO},
  	{.str = "addr",  .field = PERF_OUTPUT_ADDR},
  	{.str = "symoff", .field = PERF_OUTPUT_SYMOFFSET},
+	{.str = "srcline", .field = PERF_OUTPUT_SRCLINE},
  };
 
  /* default set to maintain compatibility with current format */
@@ -210,6 +212,11 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
  		       "to DSO.\n");
  		return -EINVAL;
  	}
+	if (PRINT_FIELD(SRCLINE) && !PRINT_FIELD(IP)) {
+		pr_err("Display of source line number requested but sample IP is not\n"
+		       "selected. Hence, no address to lookup the source line number.\n");
+		return -EINVAL;
+	}
 
  	if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
  		perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID",
@@ -245,6 +252,9 @@ static void set_print_ip_opts(struct perf_event_attr *attr)
 
  	if (PRINT_FIELD(SYMOFFSET))
  		output[type].print_ip_opts |= PRINT_IP_OPT_SYMOFFSET;
+
+	if (PRINT_FIELD(SRCLINE))
+		output[type].print_ip_opts |= PRINT_IP_OPT_SRCLINE;
  }
 
  /*
tools/perf/util/map.c +17 -0
index ef5bc91..9b9bd71 100644
@@ -11,6 +11,7 @@
  #include "strlist.h"
  #include "vdso.h"
  #include "build-id.h"
+#include "util.h"
  #include <linux/string.h>
 
  const char *map_type__name[MAP__NR_TYPES] = {
@@ -252,6 +253,22 @@ size_t map__fprintf_dsoname(struct map *map, FILE *fp)
  	return fprintf(fp, "%s", dsoname);
  }
 
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+			 FILE *fp)
+{
+	char *srcline;
+	int ret = 0;
+
+	if (map && map->dso) {
+		srcline = get_srcline(map->dso,
+				      map__rip_2objdump(map, addr));
+		if (srcline != SRCLINE_UNKNOWN)
+			ret = fprintf(fp, "%s%s", prefix, srcline);
+		free_srcline(srcline);
+	}
+	return ret;
+}
+
  /**
   * map__rip_2objdump - convert symbol start address to objdump address.
   * @map: memory map
tools/perf/util/map.h +2 -0
index e4e259c..18068c6 100644
@@ -103,6 +103,8 @@ struct map *map__clone(struct map *map);
  int map__overlap(struct map *l, struct map *r);
  size_t map__fprintf(struct map *map, FILE *fp);
  size_t map__fprintf_dsoname(struct map *map, FILE *fp);
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+			 FILE *fp);
 
  int map__load(struct map *map, symbol_filter_t filter);
  struct symbol *map__find_symbol(struct map *map,
tools/perf/util/session.c +5 -0
index c236b38..e748f29 100644
@@ -1497,6 +1497,7 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
  	int print_dso = print_opts & PRINT_IP_OPT_DSO;
  	int print_symoffset = print_opts & PRINT_IP_OPT_SYMOFFSET;
  	int print_oneline = print_opts & PRINT_IP_OPT_ONELINE;
+	int print_srcline = print_opts & PRINT_IP_OPT_SRCLINE;
  	char s = print_oneline ? ' ' : '\t';
 
  	if (symbol_conf.use_callchain && sample->callchain) {
@@ -1546,6 +1547,10 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
  				printf(")");
  			}
 
+			if (print_srcline)
+				map__fprintf_srcline(node->map, addr, "\n  ",
+						     stdout);
+
  			if (!print_oneline)
  				printf("\n");
 

tools/perf/util/session.c next: · line 1587

Quoted 8 lines
tools/perf/util/session.c +3 -0
@@ -1575,6 +1580,9 @@ next:
  			map__fprintf_dsoname(al->map, stdout);
  			printf(")");
  		}
+
+		if (print_srcline)
+			map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
  	}
  }

Why newline followed by space?

Otherwise, Acked-by: David Ahern <[email protected]>

author reviewer
#6 lore raw
Quoted 6 lines · David Ahern
Quoted 3 lines · Adrian Hunter

Add field 'srcline' that displays the source file name and line number associated with the sample ip. The information displayed is the same as from addr2line.

example output?

            grep 10701/10701 2497321.421013:  ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95
            grep 10701/10701 2497321.421984:  ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54
            grep 10701/10701 2497321.421990:  ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840
            grep 10701/10701 2497321.421992:  ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms])

/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372

Quoted 146 lines
Quoted 146 lines
---
  tools/perf/Documentation/perf-script.txt |  2 +-
  tools/perf/builtin-script.c              | 10 ++++++++++
  tools/perf/util/map.c                    | 17 +++++++++++++++++
  tools/perf/util/map.h                    |  2 ++
  tools/perf/util/session.c                |  8 ++++++++
  tools/perf/util/session.h                |  1 +
  6 files changed, 39 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-script.txt +1 -1
index cfdbb1e..c2a5071 100644
@@ -115,7 +115,7 @@ OPTIONS
  -f::
  --fields::
          Comma separated list of fields to print. Options are:
-        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff.
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr,

symoff, srcline.
Field list can be prepended with the type, trace, sw or hw, to indicate to which event type the field list applies. e.g., -f sw:comm,tid,time,ip,sym and -f trace:time,cpu,trace

tools/perf/builtin-script.c +4 -0
index 4484886..7a571fb 100644
@@ -43,6 +43,7 @@ enum perf_output_field {
      PERF_OUTPUT_DSO             = 1U << 9,
      PERF_OUTPUT_ADDR            = 1U << 10,
      PERF_OUTPUT_SYMOFFSET       = 1U << 11,
+    PERF_OUTPUT_SRCLINE         = 1U << 12,
  };
 
  struct output_option {
@@ -61,6 +62,7 @@ struct output_option {
      {.str = "dso",   .field = PERF_OUTPUT_DSO},
      {.str = "addr",  .field = PERF_OUTPUT_ADDR},
      {.str = "symoff", .field = PERF_OUTPUT_SYMOFFSET},
+    {.str = "srcline", .field = PERF_OUTPUT_SRCLINE},
  };
 
  /* default set to maintain compatibility with current format */
@@ -210,6 +212,11 @@ static int perf_evsel__check_attr(struct perf_evsel
 *evsel,
                 "to DSO.\n");
          return -EINVAL;
      }
+    if (PRINT_FIELD(SRCLINE) && !PRINT_FIELD(IP)) {
+        pr_err("Display of source line number requested but sample IP is

not\n"
+ "selected. Hence, no address to lookup the source line
number.\n");

tools/perf/builtin-script.c +5 -0
+        return -EINVAL;
+    }
 
      if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
          perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID",
@@ -245,6 +252,9 @@ static void set_print_ip_opts(struct perf_event_attr
 *attr)
 
      if (PRINT_FIELD(SYMOFFSET))
          output[type].print_ip_opts |= PRINT_IP_OPT_SYMOFFSET;
+
+    if (PRINT_FIELD(SRCLINE))
+        output[type].print_ip_opts |= PRINT_IP_OPT_SRCLINE;
  }
 

/*

tools/perf/util/map.c +17 -0
index ef5bc91..9b9bd71 100644
@@ -11,6 +11,7 @@
  #include "strlist.h"
  #include "vdso.h"
  #include "build-id.h"
+#include "util.h"
  #include <linux/string.h>
 
  const char *map_type__name[MAP__NR_TYPES] = {
@@ -252,6 +253,22 @@ size_t map__fprintf_dsoname(struct map *map, FILE *fp)
      return fprintf(fp, "%s", dsoname);
  }
 
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+             FILE *fp)
+{
+    char *srcline;
+    int ret = 0;
+
+    if (map && map->dso) {
+        srcline = get_srcline(map->dso,
+                      map__rip_2objdump(map, addr));
+        if (srcline != SRCLINE_UNKNOWN)
+            ret = fprintf(fp, "%s%s", prefix, srcline);
+        free_srcline(srcline);
+    }
+    return ret;
+}
+
  /**
   * map__rip_2objdump - convert symbol start address to objdump address.
   * @map: memory map
tools/perf/util/map.h +2 -0
index e4e259c..18068c6 100644
@@ -103,6 +103,8 @@ struct map *map__clone(struct map *map);
  int map__overlap(struct map *l, struct map *r);
  size_t map__fprintf(struct map *map, FILE *fp);
  size_t map__fprintf_dsoname(struct map *map, FILE *fp);
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+             FILE *fp);
 
  int map__load(struct map *map, symbol_filter_t filter);
  struct symbol *map__find_symbol(struct map *map,
tools/perf/util/session.c +1 -0
index c236b38..e748f29 100644
@@ -1497,6 +1497,7 @@ void perf_evsel__print_ip(struct perf_evsel *evsel,
 struct perf_sample *sample,
      int print_dso = print_opts & PRINT_IP_OPT_DSO;
      int print_symoffset = print_opts & PRINT_IP_OPT_SYMOFFSET;
      int print_oneline = print_opts & PRINT_IP_OPT_ONELINE;
+    int print_srcline = print_opts & PRINT_IP_OPT_SRCLINE;
      char s = print_oneline ? ' ' : '\t';
 
      if (symbol_conf.use_callchain && sample->callchain) {
tools/perf/util/session.c +4 -0
@@ -1546,6 +1547,10 @@ void perf_evsel__print_ip(struct perf_evsel *evsel,
 struct perf_sample *sample,
                  printf(")");
              }
 
+            if (print_srcline)
+                map__fprintf_srcline(node->map, addr, "\n  ",
+                             stdout);
+
              if (!print_oneline)
                  printf("\n");
Quoted 11 lines

tools/perf/util/session.c next: · line 1587

Quoted 9 lines
tools/perf/util/session.c +3 -0
@@ -1575,6 +1580,9 @@ next:
              map__fprintf_dsoname(al->map, stdout);
              printf(")");
          }
+
+        if (print_srcline)
+            map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
      }
  }

Why newline followed by space?

It looked better that way to me.

Quoted 5 lines

Otherwise, Acked-by: David Ahern <[email protected]>

#7 lore raw
In reply to Adrian Hunter
perf script: Add an option to print the source line number
Commit-ID:  cc8fae1d81648e85587f5d18b4f93e0b771fb02d
Gitweb:     http://git.kernel.org/tip/cc8fae1d81648e85587f5d18b4f93e0b771fb02d
Author:     Adrian Hunter <[email protected]>
AuthorDate: Fri, 6 Dec 2013 09:42:57 +0200
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 9 Dec 2013 14:47:15 -0300

perf script: Add an option to print the source line number

Add field 'srcline' that displays the source file name and line number associated with the sample ip. The information displayed is the same as from addr2line.

 $ perf script -f comm,tid,pid,time,ip,sym,dso,symoff,srcline
            grep 10701/10701 2497321.421013:  ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95
            grep 10701/10701 2497321.421984:  ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54
            grep 10701/10701 2497321.421990:  ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840
            grep 10701/10701 2497321.421992:  ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372
Cc Andi Kleen <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mike Galbraith <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
---
 tools/perf/Documentation/perf-script.txt |  2 +-
 tools/perf/builtin-script.c              | 10 ++++++++++
 tools/perf/util/map.c                    | 17 +++++++++++++++++
 tools/perf/util/map.h                    |  2 ++
 tools/perf/util/session.c                |  8 ++++++++
 tools/perf/util/session.h                |  1 +
 6 files changed, 39 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-script.txt +1 -1
index cfdbb1e..c2a5071 100644
@@ -115,7 +115,7 @@ OPTIONS
 -f::
 --fields::
         Comma separated list of fields to print. Options are:
-        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff.
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff, srcline.
         Field list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
         e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
tools/perf/builtin-script.c +10 -0
index 4484886..7a571fb 100644
@@ -43,6 +43,7 @@ enum perf_output_field {
 	PERF_OUTPUT_DSO             = 1U << 9,
 	PERF_OUTPUT_ADDR            = 1U << 10,
 	PERF_OUTPUT_SYMOFFSET       = 1U << 11,
+	PERF_OUTPUT_SRCLINE         = 1U << 12,
 };
 
 struct output_option {
@@ -61,6 +62,7 @@ struct output_option {
 	{.str = "dso",   .field = PERF_OUTPUT_DSO},
 	{.str = "addr",  .field = PERF_OUTPUT_ADDR},
 	{.str = "symoff", .field = PERF_OUTPUT_SYMOFFSET},
+	{.str = "srcline", .field = PERF_OUTPUT_SRCLINE},
 };
 
 /* default set to maintain compatibility with current format */
@@ -210,6 +212,11 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
 		       "to DSO.\n");
 		return -EINVAL;
 	}
+	if (PRINT_FIELD(SRCLINE) && !PRINT_FIELD(IP)) {
+		pr_err("Display of source line number requested but sample IP is not\n"
+		       "selected. Hence, no address to lookup the source line number.\n");
+		return -EINVAL;
+	}
 
 	if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
 		perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID",
@@ -245,6 +252,9 @@ static void set_print_ip_opts(struct perf_event_attr *attr)
 
 	if (PRINT_FIELD(SYMOFFSET))
 		output[type].print_ip_opts |= PRINT_IP_OPT_SYMOFFSET;
+
+	if (PRINT_FIELD(SRCLINE))
+		output[type].print_ip_opts |= PRINT_IP_OPT_SRCLINE;
 }
 
 /*
tools/perf/util/map.c +17 -0
index ef5bc91..9b9bd71 100644
@@ -11,6 +11,7 @@
 #include "strlist.h"
 #include "vdso.h"
 #include "build-id.h"
+#include "util.h"
 #include <linux/string.h>
 
 const char *map_type__name[MAP__NR_TYPES] = {
@@ -252,6 +253,22 @@ size_t map__fprintf_dsoname(struct map *map, FILE *fp)
 	return fprintf(fp, "%s", dsoname);
 }
 
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+			 FILE *fp)
+{
+	char *srcline;
+	int ret = 0;
+
+	if (map && map->dso) {
+		srcline = get_srcline(map->dso,
+				      map__rip_2objdump(map, addr));
+		if (srcline != SRCLINE_UNKNOWN)
+			ret = fprintf(fp, "%s%s", prefix, srcline);
+		free_srcline(srcline);
+	}
+	return ret;
+}
+
 /**
  * map__rip_2objdump - convert symbol start address to objdump address.
  * @map: memory map
tools/perf/util/map.h +2 -0
index e4e259c..18068c6 100644
@@ -103,6 +103,8 @@ struct map *map__clone(struct map *map);
 int map__overlap(struct map *l, struct map *r);
 size_t map__fprintf(struct map *map, FILE *fp);
 size_t map__fprintf_dsoname(struct map *map, FILE *fp);
+int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
+			 FILE *fp);
 
 int map__load(struct map *map, symbol_filter_t filter);
 struct symbol *map__find_symbol(struct map *map,
tools/perf/util/session.c +8 -0
index c236b38..e748f29 100644
@@ -1497,6 +1497,7 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 	int print_dso = print_opts & PRINT_IP_OPT_DSO;
 	int print_symoffset = print_opts & PRINT_IP_OPT_SYMOFFSET;
 	int print_oneline = print_opts & PRINT_IP_OPT_ONELINE;
+	int print_srcline = print_opts & PRINT_IP_OPT_SRCLINE;
 	char s = print_oneline ? ' ' : '\t';
 
 	if (symbol_conf.use_callchain && sample->callchain) {
@@ -1546,6 +1547,10 @@ void perf_evsel__print_ip(struct perf_evsel *evsel, struct perf_sample *sample,
 				printf(")");
 			}
 
+			if (print_srcline)
+				map__fprintf_srcline(node->map, addr, "\n  ",
+						     stdout);
+
 			if (!print_oneline)
 				printf("\n");
 
@@ -1575,6 +1580,9 @@ next:
 			map__fprintf_dsoname(al->map, stdout);
 			printf(")");
 		}
+
+		if (print_srcline)
+			map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
 	}
 }
 
tools/perf/util/session.h +1 -0
index 004d3e8..2a3955e 100644
@@ -45,6 +45,7 @@ struct perf_session {
 #define PRINT_IP_OPT_DSO		(1<<2)
 #define PRINT_IP_OPT_SYMOFFSET	(1<<3)
 #define PRINT_IP_OPT_ONELINE	(1<<4)
+#define PRINT_IP_OPT_SRCLINE	(1<<5)
 
 struct perf_tool;
 
author reviewer
#8 lore raw

PATCH v2 3/3 perf script: Improve srcline display for BTS

In reply to Adrian Hunter

Change the order of the output to put the srcline last. e.g. old format:

          4028fc main+0x2c (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269 => 40d8a0 set_program_name+0x0 (/bin/ls)

new format:

          4028fc main+0x2c (/bin/ls) =>           40d8a0 set_program_name+0x0 (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269

---
 tools/perf/builtin-script.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
tools/perf/builtin-script.c +15 -5
index 7a571fb..8997b69 100644
@@ -428,15 +428,22 @@ static void print_sample_bts(union perf_event *event,
 			     struct addr_location *al)
 {
 	struct perf_event_attr *attr = &evsel->attr;
+	bool print_srcline_last = false;
 
 	/* print branch_from information */
 	if (PRINT_FIELD(IP)) {
-		if (!symbol_conf.use_callchain)
-			printf(" ");
-		else
+		unsigned int print_opts = output[attr->type].print_ip_opts;
+
+		if (symbol_conf.use_callchain && sample->callchain) {
 			printf("\n");
-		perf_evsel__print_ip(evsel, sample, machine, al,
-				     output[attr->type].print_ip_opts,
+		} else {
+			printf(" ");
+			if (print_opts & PRINT_IP_OPT_SRCLINE) {
+				print_srcline_last = true;
+				print_opts &= ~PRINT_IP_OPT_SRCLINE;
+			}
+		}
+		perf_evsel__print_ip(evsel, sample, machine, al, print_opts,
 				     PERF_MAX_STACK_DEPTH);
 	}
 
@@ -448,6 +455,9 @@ static void print_sample_bts(union perf_event *event,
 	     !output[attr->type].user_set))
 		print_sample_addr(event, sample, machine, thread, attr);
 
+	if (print_srcline_last)
+		map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
+
 	printf("\n");
 }
 
Signature · 1 line
1.7.11.7
#9 lore raw

Re: [PATCH V2 3/3] perf script: Improve srcline display for BTS

Em Fri, Dec 06, 2013 at 09:42:58AM +0200, Adrian Hunter escreveu:

Quoted 2 lines

Change the order of the output to put the srcline last. e.g. old format:

Can you please always provide the command line used, so that people can quickly reproduce your results, before and after your changes?

- Arnaldo

Quoted 57 lines
          4028fc main+0x2c (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269 => 40d8a0 set_program_name+0x0 (/bin/ls)

new format:

          4028fc main+0x2c (/bin/ls) =>           40d8a0 set_program_name+0x0 (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269

---
 tools/perf/builtin-script.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
tools/perf/builtin-script.c +15 -5
index 7a571fb..8997b69 100644
@@ -428,15 +428,22 @@ static void print_sample_bts(union perf_event *event,
 			     struct addr_location *al)
 {
 	struct perf_event_attr *attr = &evsel->attr;
+	bool print_srcline_last = false;
 
 	/* print branch_from information */
 	if (PRINT_FIELD(IP)) {
-		if (!symbol_conf.use_callchain)
-			printf(" ");
-		else
+		unsigned int print_opts = output[attr->type].print_ip_opts;
+
+		if (symbol_conf.use_callchain && sample->callchain) {
 			printf("\n");
-		perf_evsel__print_ip(evsel, sample, machine, al,
-				     output[attr->type].print_ip_opts,
+		} else {
+			printf(" ");
+			if (print_opts & PRINT_IP_OPT_SRCLINE) {
+				print_srcline_last = true;
+				print_opts &= ~PRINT_IP_OPT_SRCLINE;
+			}
+		}
+		perf_evsel__print_ip(evsel, sample, machine, al, print_opts,
 				     PERF_MAX_STACK_DEPTH);
 	}
 
@@ -448,6 +455,9 @@ static void print_sample_bts(union perf_event *event,
 	     !output[attr->type].user_set))
 		print_sample_addr(event, sample, machine, thread, attr);
 
+	if (print_srcline_last)
+		map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
+
 	printf("\n");
 }
 
Signature · 1 line
1.7.11.7
author reviewer
#10 lore raw

Re: [PATCH V2 3/3] perf script: Improve srcline display for BTS

Quoted 6 lines · Arnaldo Carvalho de Melo

Em Fri, Dec 06, 2013 at 09:42:58AM +0200, Adrian Hunter escreveu:

Quoted 2 lines

Change the order of the output to put the srcline last. e.g. old format:

Can you please always provide the command line used, so that people can quickly reproduce your results, before and after your changes?

OK

perf record -e branches:u -c 1 -d ls

perf script -fip,sym,symoff,addr,srcline

Quoted 62 lines

- Arnaldo

Quoted 57 lines
          4028fc main+0x2c (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269 => 40d8a0 set_program_name+0x0 (/bin/ls)

new format:

          4028fc main+0x2c (/bin/ls) =>           40d8a0 set_program_name+0x0 (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269

---
 tools/perf/builtin-script.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
tools/perf/builtin-script.c +15 -5
index 7a571fb..8997b69 100644
@@ -428,15 +428,22 @@ static void print_sample_bts(union perf_event *event,
 			     struct addr_location *al)
 {
 	struct perf_event_attr *attr = &evsel->attr;
+	bool print_srcline_last = false;
 
 	/* print branch_from information */
 	if (PRINT_FIELD(IP)) {
-		if (!symbol_conf.use_callchain)
-			printf(" ");
-		else
+		unsigned int print_opts = output[attr->type].print_ip_opts;
+
+		if (symbol_conf.use_callchain && sample->callchain) {
 			printf("\n");
-		perf_evsel__print_ip(evsel, sample, machine, al,
-				     output[attr->type].print_ip_opts,
+		} else {
+			printf(" ");
+			if (print_opts & PRINT_IP_OPT_SRCLINE) {
+				print_srcline_last = true;
+				print_opts &= ~PRINT_IP_OPT_SRCLINE;
+			}
+		}
+		perf_evsel__print_ip(evsel, sample, machine, al, print_opts,
 				     PERF_MAX_STACK_DEPTH);
 	}
 
@@ -448,6 +455,9 @@ static void print_sample_bts(union perf_event *event,
 	     !output[attr->type].user_set))
 		print_sample_addr(event, sample, machine, thread, attr);
 
+	if (print_srcline_last)
+		map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
+
 	printf("\n");
 }
 
Signature · 1 line
1.7.11.7
author reviewer
#11 lore raw

Re: [PATCH V2 3/3] perf script: Improve srcline display for BTS

Quoted 5 lines · Adrian Hunter
Quoted 4 lines · Arnaldo Carvalho de Melo

Em Fri, Dec 06, 2013 at 09:42:58AM +0200, Adrian Hunter escreveu:

Quoted 2 lines

Change the order of the output to put the srcline last. e.g. old format:

Quoted 8 lines
Quoted 2 lines

Can you please always provide the command line used, so that people can quickly reproduce your results, before and after your changes?

OK

perf record -e branches:u -c 1 -d ls

perf script -fip,sym,symoff,addr,srcline

Oops missed dso. That should be:

perf script -fip,sym,symoff,dso,addr,srcline

Quoted 66 lines
Quoted 63 lines

- Arnaldo

Quoted 57 lines
          4028fc main+0x2c (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269 => 40d8a0 set_program_name+0x0 (/bin/ls)

new format:

          4028fc main+0x2c (/bin/ls) =>           40d8a0 set_program_name+0x0 (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269

---
 tools/perf/builtin-script.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
tools/perf/builtin-script.c +15 -5
index 7a571fb..8997b69 100644
@@ -428,15 +428,22 @@ static void print_sample_bts(union perf_event *event,
 			     struct addr_location *al)
 {
 	struct perf_event_attr *attr = &evsel->attr;
+	bool print_srcline_last = false;
 
 	/* print branch_from information */
 	if (PRINT_FIELD(IP)) {
-		if (!symbol_conf.use_callchain)
-			printf(" ");
-		else
+		unsigned int print_opts = output[attr->type].print_ip_opts;
+
+		if (symbol_conf.use_callchain && sample->callchain) {
 			printf("\n");
-		perf_evsel__print_ip(evsel, sample, machine, al,
-				     output[attr->type].print_ip_opts,
+		} else {
+			printf(" ");
+			if (print_opts & PRINT_IP_OPT_SRCLINE) {
+				print_srcline_last = true;
+				print_opts &= ~PRINT_IP_OPT_SRCLINE;
+			}
+		}
+		perf_evsel__print_ip(evsel, sample, machine, al, print_opts,
 				     PERF_MAX_STACK_DEPTH);
 	}
 
@@ -448,6 +455,9 @@ static void print_sample_bts(union perf_event *event,
 	     !output[attr->type].user_set))
 		print_sample_addr(event, sample, machine, thread, attr);
 
+	if (print_srcline_last)
+		map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
+
 	printf("\n");
 }
 
Signature · 1 line
1.7.11.7
author reviewer
#12 lore raw

PATCH v3 1/1 perf script: Improve srcline display for BTS

Change the order of the output to put the srcline last. e.g.

perf record -e branches:u -c 1 -d ls perf script -fip,sym,symoff,dso,addr,srcline

old format:

          4028fc main+0x2c (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269 => 40d8a0 set_program_name+0x0 (/bin/ls)

new format:

          4028fc main+0x2c (/bin/ls) =>           40d8a0 set_program_name+0x0 (/bin/ls)

/build/buildd/coreutils-8.20/src/ls.c:1269

---
 tools/perf/builtin-script.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
tools/perf/builtin-script.c +15 -5
index 7a571fb..8997b69 100644
@@ -428,15 +428,22 @@ static void print_sample_bts(union perf_event *event,
 			     struct addr_location *al)
 {
 	struct perf_event_attr *attr = &evsel->attr;
+	bool print_srcline_last = false;
 
 	/* print branch_from information */
 	if (PRINT_FIELD(IP)) {
-		if (!symbol_conf.use_callchain)
-			printf(" ");
-		else
+		unsigned int print_opts = output[attr->type].print_ip_opts;
+
+		if (symbol_conf.use_callchain && sample->callchain) {
 			printf("\n");
-		perf_evsel__print_ip(evsel, sample, machine, al,
-				     output[attr->type].print_ip_opts,
+		} else {
+			printf(" ");
+			if (print_opts & PRINT_IP_OPT_SRCLINE) {
+				print_srcline_last = true;
+				print_opts &= ~PRINT_IP_OPT_SRCLINE;
+			}
+		}
+		perf_evsel__print_ip(evsel, sample, machine, al, print_opts,
 				     PERF_MAX_STACK_DEPTH);
 	}
 
@@ -448,6 +455,9 @@ static void print_sample_bts(union perf_event *event,
 	     !output[attr->type].user_set))
 		print_sample_addr(event, sample, machine, thread, attr);
 
+	if (print_srcline_last)
+		map__fprintf_srcline(al->map, al->addr, "\n  ", stdout);
+
 	printf("\n");
 }
 

-- 1.7.11.7