Skip to contentSkip to conversation

input synaptics-rmi4: Debugfs initialization fixes

PATCH Applied Christopher Heiny 2 participants 2 messages Dec 11, 2013 – Dec 15, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 input synaptics-rmi4: Debugfs initialization fixes

This fixes the broken #ifdefs on CONFIG_RMI4_DEBUG. Per device debugfs setup is reordered to ensure that the debugfs tree for a given device is created before it is registered (since the action of registering a device may cause other things to happen that depend on debugfs being initialized already).

Cc Dmitry Torokhov <[email protected]>
Cc Jean Delvare <[email protected]>
Cc Linus Walleij <[email protected]>
Cc Joerie de Gram <[email protected]>
Cc Benjamin Tissoires <[email protected]>

---

This patch implements changes to the synaptics-rmi4 branch of Dmitry's input tree. The base for the patch is commit f154022b208a59b048f52b7b5d58a5ec1949b96e.

 drivers/input/rmi4/rmi_bus.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/input/rmi4/rmi_bus.c +15 -9
index cb14cf6..173f6be 100644
@@ -47,7 +47,7 @@ bool rmi_is_physical_device(struct device *dev)
 	return dev->type == &rmi_device_type;
 }
 
-#if CONFIG_RMI4_DEBUG
+#ifdef CONFIG_RMI4_DEBUG
 
 static void rmi_physical_setup_debugfs(struct rmi_device *rmi_dev)
 {
@@ -109,12 +109,12 @@ int rmi_register_physical_device(struct rmi_phys_device *phys)
 
 	phys->rmi_dev = rmi_dev;
 
+	rmi_physical_setup_debugfs(rmi_dev);
+
 	error = device_register(&rmi_dev->dev);
 	if (error)
 		return error;
 
-	rmi_physical_setup_debugfs(rmi_dev);
-
 	dev_dbg(phys->dev, "%s: Registered %s as %s.\n", __func__,
 		pdata->sensor_name, dev_name(&rmi_dev->dev));
 
@@ -155,7 +155,7 @@ bool rmi_is_function_device(struct device *dev)
 	return dev->type == &rmi_function_type;
 }
 
-#if CONFIG_RMI4_DEBUG
+#ifdef CONFIG_RMI4_DEBUG
 
 static void rmi_function_setup_debugfs(struct rmi_function *fn)
 {
@@ -233,18 +233,23 @@ int rmi_register_function(struct rmi_function *fn)
 	fn->dev.type = &rmi_function_type;
 	fn->dev.bus = &rmi_bus_type;
 
+	rmi_function_setup_debugfs(fn);
+
 	error = device_register(&fn->dev);
 	if (error) {
 		dev_err(&rmi_dev->dev,
 			"Failed device_register function device %s\n",
 			dev_name(&fn->dev));
-		return error;
+		goto error_exit;
 	}
 
 	dev_dbg(&rmi_dev->dev, "Registered F%02X.\n", fn->fd.function_number);
 
-	rmi_function_setup_debugfs(fn);
 	return 0;
+
+error_exit:
+	rmi_function_teardown_debugfs(fn);
+	return error;
 }
 
 void rmi_unregister_function(struct rmi_function *fn)
@@ -357,6 +362,8 @@ static int __init rmi_bus_init(void)
 		return error;
 	}
 
+	rmi_bus_setup_debugfs();
+
 	error = rmi_register_f01_handler();
 	if (error) {
 		pr_err("%s: error registering the RMI F01 handler: %d\n",
@@ -371,13 +378,12 @@ static int __init rmi_bus_init(void)
 		goto err_unregister_f01;
 	}
 
-	rmi_bus_setup_debugfs();
-
 	return 0;
 
 err_unregister_f01:
 	rmi_unregister_f01_handler();
 err_unregister_bus:
+	rmi_bus_teardown_debugfs();
 	bus_unregister(&rmi_bus_type);
 	return error;
 }
@@ -390,9 +396,9 @@ static void __exit rmi_bus_exit(void)
 	 * all we have to do at this point is unregister ourselves.
 	 */
 
-	rmi_bus_teardown_debugfs();
 	rmi_unregister_physical_driver();
 	rmi_unregister_f01_handler();
+	rmi_bus_teardown_debugfs();
 	bus_unregister(&rmi_bus_type);
 }
 module_exit(rmi_bus_exit);
maintainer Applied
#1 lore raw
Quoted 6 lines · Christopher Heiny

This fixes the broken #ifdefs on CONFIG_RMI4_DEBUG. Per device debugfs setup is reordered to ensure that the debugfs tree for a given device is created before it is registered (since the action of registering a device may cause other things to happen that depend on debugfs being initialized already).

Quoted 7 lines
Cc Dmitry Torokhov <[email protected]>
Cc Jean Delvare <[email protected]>
Cc Linus Walleij <[email protected]>
Cc Joerie de Gram <[email protected]>
Cc Benjamin Tissoires <[email protected]>

Applied, thank you.

Quoted 107 lines

---

This patch implements changes to the synaptics-rmi4 branch of Dmitry's input tree. The base for the patch is commit f154022b208a59b048f52b7b5d58a5ec1949b96e.

 drivers/input/rmi4/rmi_bus.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/input/rmi4/rmi_bus.c +15 -9
index cb14cf6..173f6be 100644
@@ -47,7 +47,7 @@ bool rmi_is_physical_device(struct device *dev)
 	return dev->type == &rmi_device_type;
 }
 
-#if CONFIG_RMI4_DEBUG
+#ifdef CONFIG_RMI4_DEBUG
 
 static void rmi_physical_setup_debugfs(struct rmi_device *rmi_dev)
 {
@@ -109,12 +109,12 @@ int rmi_register_physical_device(struct rmi_phys_device *phys)
 
 	phys->rmi_dev = rmi_dev;
 
+	rmi_physical_setup_debugfs(rmi_dev);
+
 	error = device_register(&rmi_dev->dev);
 	if (error)
 		return error;
 
-	rmi_physical_setup_debugfs(rmi_dev);
-
 	dev_dbg(phys->dev, "%s: Registered %s as %s.\n", __func__,
 		pdata->sensor_name, dev_name(&rmi_dev->dev));
 
@@ -155,7 +155,7 @@ bool rmi_is_function_device(struct device *dev)
 	return dev->type == &rmi_function_type;
 }
 
-#if CONFIG_RMI4_DEBUG
+#ifdef CONFIG_RMI4_DEBUG
 
 static void rmi_function_setup_debugfs(struct rmi_function *fn)
 {
@@ -233,18 +233,23 @@ int rmi_register_function(struct rmi_function *fn)
 	fn->dev.type = &rmi_function_type;
 	fn->dev.bus = &rmi_bus_type;
 
+	rmi_function_setup_debugfs(fn);
+
 	error = device_register(&fn->dev);
 	if (error) {
 		dev_err(&rmi_dev->dev,
 			"Failed device_register function device %s\n",
 			dev_name(&fn->dev));
-		return error;
+		goto error_exit;
 	}
 
 	dev_dbg(&rmi_dev->dev, "Registered F%02X.\n", fn->fd.function_number);
 
-	rmi_function_setup_debugfs(fn);
 	return 0;
+
+error_exit:
+	rmi_function_teardown_debugfs(fn);
+	return error;
 }
 
 void rmi_unregister_function(struct rmi_function *fn)
@@ -357,6 +362,8 @@ static int __init rmi_bus_init(void)
 		return error;
 	}
 
+	rmi_bus_setup_debugfs();
+
 	error = rmi_register_f01_handler();
 	if (error) {
 		pr_err("%s: error registering the RMI F01 handler: %d\n",
@@ -371,13 +378,12 @@ static int __init rmi_bus_init(void)
 		goto err_unregister_f01;
 	}
 
-	rmi_bus_setup_debugfs();
-
 	return 0;
 
 err_unregister_f01:
 	rmi_unregister_f01_handler();
 err_unregister_bus:
+	rmi_bus_teardown_debugfs();
 	bus_unregister(&rmi_bus_type);
 	return error;
 }
@@ -390,9 +396,9 @@ static void __exit rmi_bus_exit(void)
 	 * all we have to do at this point is unregister ourselves.
 	 */
 
-	rmi_bus_teardown_debugfs();
 	rmi_unregister_physical_driver();
 	rmi_unregister_f01_handler();
+	rmi_bus_teardown_debugfs();
 	bus_unregister(&rmi_bus_type);
 }
 module_exit(rmi_bus_exit);
Signature · 1 line
Dmitry