am3517_evm: Ethernet activation
This patch continues Tom's effort in activating Ethernet on am3517_evm board
(http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot/u-boot-arm.git;a=commit;h=18a02e8050b7af165efa72325753e7880bf5567c).
I've removed #if statements, because in include/configs/am3517_evm.h EMAC is activated by default. I've also enebled CONFIG_OMAP_GPIO (needed to turn pin 30 on).
Patch created against u-boot/u-boot-ti.git
Yegor
PATCH v4 1/1 am3517_evm: activate Ethernet PHY
From: Yegor Yefremov <[email protected]>
Pin 30 is connected to PHY's RESET# signal, so it must be put to high. Otherwise PHY won't be found via MDIO interface.
---
Changes:
v4: as Tom Rini's patch "AM3517 EVM: Enable Ethernet" activates EMAC by default, remove #if statements
v3: use "__maybe_unused", instead of #if defined statement (Stefan Roese)
v2: put ctr and reset under #if defined statement, to avoid compiler warnings, when EMAC is not selected
board/logicpd/am3517evm/am3517evm.c | 32 ++++++++++++++++++++++++++++++++ board/logicpd/am3517evm/am3517evm.h | 2 +- include/configs/am3517_evm.h | 5 +++++ 3 files changed, 38 insertions(+), 1 deletions(-)
board/logicpd/am3517evm/am3517evm.c +32 -0
@@ -22,6 +22,7 @@#include <asm/arch/musb.h> #include <asm/mach-types.h> #include <asm/errno.h> +#include <asm/gpio.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/musb.h>
@@ -31,6 +32,9 @@DECLARE_GLOBAL_DATA_PTR ; +#define AM3517_IP_SW_RESET 0x48002598 +#define CPGMACSS_SW_RST (1 << 1) +/* * Routine: board_init * Description: Early hardware init.
@@ -98,6 +102,9 @@ static void am3517_evm_musb_init(void)*/ int misc_init_r (void ) { +volatile unsigned int ctr; +u32 reset; +#ifdef CONFIG_DRIVER_OMAP34XX_I2C i2c_init (CONFIG_SYS_I2C_SPEED ,CONFIG_SYS_I2C_SLAVE );#endif
@@ -106,6 +113,31 @@ int misc_init_r(void)am3517_evm_musb_init (); +/* activate PHY reset */ +gpio_direction_output (30 ,0 ); +gpio_set_value (30 ,0 ); + + ctr =0 ; +do { +udelay (1000 ); + ctr++; + }while (ctr <300 ); + +/* deactivate PHY reset */ +gpio_set_value (30 ,1 ); + +/* allow the PHY to stabilize and settle down */ + ctr =0 ; +do { +udelay (1000 ); + ctr++; + }while (ctr <300 ); + +/* ensure that the module is out of reset */ + reset =readl (AM3517_IP_SW_RESET ); + reset &= (~CPGMACSS_SW_RST ); +writel (reset,AM3517_IP_SW_RESET ); +return 0 ; }
board/logicpd/am3517evm/am3517evm.h +1 -1
@@ -315,7 +315,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \MUX_VAL (CP (SYS_NIRQ ), (IEN |PTU |EN |M0 )) \ /*SYS_nRESWARM */\ -MUX_VAL (CP (SYS_NRESWARM ), (IDIS |PTU |DIS |M4 )) \ +MUX_VAL (CP (SYS_NRESWARM ), (IDIS |PTU |EN |M4 )) \ /* - GPIO30 */\MUX_VAL (CP (SYS_BOOT0 ), (IEN |PTD |DIS |M4 ))/*GPIO_2*/ \/* - PEN_IRQ */ \
include/configs/am3517_evm.h +5 -0
@@ -58,6 +58,11 @@*/ /* +* OMAP GPIO configuration +*/ +#define CONFIG_OMAP_GPIO + +/* * NS16550 Configuration */ #define V_NS16550_CLK 48000000/* 48MHz (APLL96/2) */
Signature · 1 line
1.7.7
PATCH v4 1/1 am3517_evm: activate Ethernet PHY
Quoted 6 lines · Yegor Yefremov
From: Yegor Yefremov <[email protected]>
Pin 30 is connected to PHY's RESET# signal, so it must be put to high. Otherwise PHY won't be found via MDIO interface.
Signed-off-by Yegor Yefremov <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/545ad556/attachment.pgp>